ARM: dts: sbc-t3x: refactor DT support

[sagit-ice-cold/kernel_xiaomi_msm8998.git] / arch / arm / boot / dts / omap3-cm-t3730.dts

diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 508cd9b..b3f9a50 100644 (file)
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -32,16 +32,6 @@
 };
 
 &omap3_pmx_core {
-       mmc1_pins: pinmux_mmc1_pins {
-               pinctrl-single,pins = <
-                       OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)/* sdmmc1_clk.sdmmc1_clk */
-                       OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
-                       OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
-                       OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
-                       OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
-                       OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
-               >;
-       };
 
        mmc2_pins: pinmux_mmc2_pins {
                pinctrl-single,pins = <
@@ -54,20 +44,6 @@
                >;
        };
 
-       smsc1_pins: pinmux_smsc1_pins {
-               pinctrl-single,pins = <
-                       OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs5.gpmc_ncs5 */
-                       OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
-               >;
-       };
-
-       uart3_pins: pinmux_uart3_pins {
-               pinctrl-single,pins = <
-                       OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)        /* uart3_rx_irrx.uart3_rx_irrx */
-                       OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)       /* uart3_tx_irtx.uart3_tx_irtx */
-               >;
-       };
-
        wl12xx_gpio: pinmux_wl12xx_gpio {
                pinctrl-single,pins = <
                        OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)       /* dss_data3.gpio_73 */
@@ -76,13 +52,6 @@
        };
 };
 
-&mmc1 {
-       vmmc-supply = <&vmmc1>;
-       bus-width = <4>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc1_pins>;
-};
-
 &mmc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc2_pins>;
@@ -92,13 +61,3 @@
        bus-width = <4>;
        cap-power-off-card;
 };
-
-&smsc1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&smsc1_pins>;
-};
-
-&uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
-};