Merge branch 'fixes' into next/cleanup

[uclinux-h8/linux.git] / arch / arm / mach-omap2 / cclock44xx_data.c

diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index b1e77ef..88e37a4 100644 (file)
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -52,6 +52,13 @@
  */
 #define OMAP4_DPLL_ABE_DEFFREQ                         98304000
 
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ                         960000000
+
 /* Root clocks */
 
 DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
                    OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
                    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
 
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+               OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+               OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
 DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
                OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
                OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@@ -1549,6 +1560,7 @@ static struct omap_clk omap44xx_clks[] = {
        CLK(NULL,       "per_mcbsp4_gfclk",             &per_mcbsp4_gfclk),
        CLK(NULL,       "hsmmc1_fclk",                  &hsmmc1_fclk),
        CLK(NULL,       "hsmmc2_fclk",                  &hsmmc2_fclk),
+       CLK(NULL,       "ocp2scp_usb_phy_phy_48m",      &ocp2scp_usb_phy_phy_48m),
        CLK(NULL,       "sha2md5_fck",                  &sha2md5_fck),
        CLK(NULL,       "slimbus1_fclk_1",              &slimbus1_fclk_1),
        CLK(NULL,       "slimbus1_fclk_0",              &slimbus1_fclk_0),
@@ -1706,5 +1718,13 @@ int __init omap4xxx_clk_init(void)
        if (rc)
                pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
+       /*
+        * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+        * domain can transition to retention state when not in use.
+        */
+       rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+       if (rc)
+               pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
        return 0;
 }