#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/gpio.h>
+#include <sound/wm1250-ev1.h>
+
+#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/map.h>
-#include <mach/s3c6410.h>
#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
+#include <mach/crag6410.h>
#include <mach/regs-gpio-memport.h>
+#include <plat/s3c6410.h>
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
#include <plat/fb.h>
#include <plat/iic.h>
#include <plat/pm.h>
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
-
-#define PCA935X_GPIO_BASE GPIO_BOARD_START
-#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
-
/* serial port setup */
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
.id = -1,
};
+static struct platform_device lowland_device = {
+ .name = "lowland",
+ .id = -1,
+};
+
static struct platform_device speyside_wm8962_device = {
.name = "speyside-wm8962",
.id = -1,
};
+static struct platform_device littlemill_device = {
+ .name = "littlemill",
+ .id = -1,
+};
+
static struct regulator_consumer_supply wallvdd_consumers[] = {
REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
+ REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
};
static struct regulator_init_data wallvdd_data = {
&crag6410_backlight_device,
&speyside_device,
&speyside_wm8962_device,
+ &littlemill_device,
+ &lowland_device,
&wallvdd_device,
};
.irq_base = 0,
};
+/* VDDARM is controlled by DVS1 connected to GPK(0) */
+static struct wm831x_buckv_pdata vddarm_pdata = {
+ .dvs_control_src = 1,
+ .dvs_gpio = S3C64XX_GPK(0),
+};
+
static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
REGULATOR_SUPPLY("vddarm", NULL),
};
.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
.consumer_supplies = vddarm_consumers,
.supply_regulator = "WALLVDD",
+ .driver_data = &vddarm_pdata,
+};
+
+static struct regulator_consumer_supply vddint_consumers[] __initdata = {
+ REGULATOR_SUPPLY("vddint", NULL),
};
static struct regulator_init_data vddint __initdata = {
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
+ .num_consumer_supplies = ARRAY_SIZE(vddint_consumers),
+ .consumer_supplies = vddint_consumers,
+ .supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddmem __initdata = {
static struct wm831x_pdata crag_pmic_pdata __initdata = {
.wm831x_num = 1,
.irq_base = BANFF_PMIC_IRQ_BASE,
- .gpio_base = GPIO_BOARD_START + 8,
+ .gpio_base = BANFF_PMIC_GPIO_BASE,
+ .soft_shutdown = true,
.backup = &banff_backup_pdata,
.gpio_defaults = {
+ /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
+ [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
};
static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+ REGULATOR_SUPPLY("LDOVDD", "1-001a"),
REGULATOR_SUPPLY("PLLVDD", "1-001a"),
REGULATOR_SUPPLY("DBVDD", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD1", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD2", "1-001a"),
+ REGULATOR_SUPPLY("DBVDD3", "1-001a"),
REGULATOR_SUPPLY("CPVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD2", "1-001a"),
REGULATOR_SUPPLY("DCVDD", "1-001a"),
.wm831x_num = 2,
.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
+ .soft_shutdown = true,
.gpio_defaults = {
/* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
.disable_touch = true,
};
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
- {
- .name = "Sub LPF",
- .rate = 48000,
- .regs = {
- 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
- 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
- 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
- },
- },
- {
- .name = "Sub HPF",
- .rate = 48000,
- .regs = {
- 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
- 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
- 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
- },
+static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
+ .gpios = {
+ [WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
+ [WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
+ [WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
+ [WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
+ [WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
},
};
-static struct wm8996_pdata wm8996_pdata __initdata = {
- .ldo_ena = S3C64XX_GPN(7),
- .gpio_base = CODEC_GPIO_BASE,
- .micdet_def = 1,
- .inl_mode = WM8996_DIFFERRENTIAL_1,
- .inr_mode = WM8996_DIFFERRENTIAL_1,
-
- .irq_flags = IRQF_TRIGGER_RISING,
-
- .gpio_default = {
- 0x8001, /* GPIO1 == ADCLRCLK1 */
- 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
- 0x0141, /* GPIO3 == HP_SEL */
- 0x0002, /* GPIO4 == IRQ */
- 0x020e, /* GPIO5 == CLKOUT */
- },
-
- .retune_mobile_cfgs = wm8996_retune,
- .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
- .gpio_init = {
- 0,
- WM8962_GPIO_FN_OPCLK,
- WM8962_GPIO_FN_DMICCLK,
- 0,
- 0x8000 | WM8962_GPIO_FN_DMICDAT,
- WM8962_GPIO_FN_IRQ, /* Open drain mode */
- },
- .irq_active_low = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
- .irq_high = false,
- .irq_cmos = false,
-};
-
static struct i2c_board_info i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("wm8311", 0x34),
.irq = S3C_EINT(0),
.platform_data = &glenfarclas_pmic_pdata },
- { I2C_BOARD_INFO("wm1250-ev1", 0x27) },
- { I2C_BOARD_INFO("wm8996", 0x1a),
- .platform_data = &wm8996_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
- { I2C_BOARD_INFO("wm9081", 0x6c),
- .platform_data = &wm9081_pdata, },
- { I2C_BOARD_INFO("wm8962", 0x1a),
- .platform_data = &wm8962_pdata,
- .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
- },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x24) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x25) },
+ { I2C_BOARD_INFO("wlf-gf-module", 0x26) },
+
+ { I2C_BOARD_INFO("wm1250-ev1", 0x27),
+ .platform_data = &wm1250_ev1_pdata },
+};
+
+static struct s3c2410_platform_i2c i2c1_pdata = {
+ .frequency = 400000,
+ .bus_num = 1,
};
static void __init crag6410_map_io(void)
s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
s3c_i2c0_set_platdata(&i2c0_pdata);
- s3c_i2c1_set_platdata(NULL);
+ s3c_i2c1_set_platdata(&i2c1_pdata);
s3c_fb_set_platdata(&crag6410_lcd_pdata);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
.atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
+ .handle_irq = vic_handle_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.timer = &s3c24xx_timer,
OSDN Git Service
