#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/mfd/ucb1x00.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
#include <linux/gpio.h>
#include <linux/pda_power.h>
+#include <video/sa1100fb.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include "generic.h"
static struct resource collie_scoop_resources[] = {
- [0] = {
- .start = 0x40800000,
- .end = 0x40800fff,
- .flags = IORESOURCE_MEM,
- },
+ [0] = DEFINE_RES_MEM(0x40800000, SZ_4K),
};
static struct scoop_config collie_scoop_setup = {
.num_devs = 1,
};
+static struct ucb1x00_plat_data collie_ucb1x00_data = {
+ .gpio_base = COLLIE_TC35143_GPIO_BASE,
+};
+
static struct mcp_plat_data collie_mcp_data = {
.mccr0 = MCCR0_ADM | MCCR0_ExtClk,
.sclk_rate = 9216000,
- .gpio_base = COLLIE_TC35143_GPIO_BASE,
+ .codec_pdata = &collie_ucb1x00_data,
};
/*
static struct resource locomo_resources[] = {
- [0] = {
- .start = 0x40000000,
- .end = 0x40001fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_GPIO25,
- .end = IRQ_GPIO25,
- .flags = IORESOURCE_IRQ,
- },
+ [0] = DEFINE_RES_MEM(0x40000000, SZ_8K),
+ [1] = DEFINE_RES_IRQ(IRQ_GPIO25),
};
static struct locomo_platform_data locomo_info = {
};
static struct resource collie_flash_resources[] = {
- {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }
+ DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+};
+
+static struct sa1100fb_mach_info collie_lcd_info = {
+ .pixclock = 171521, .bpp = 16,
+ .xres = 320, .yres = 240,
+
+ .hsync_len = 5, .vsync_len = 1,
+ .left_margin = 11, .upper_margin = 2,
+ .right_margin = 30, .lower_margin = 0,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
};
static void __init collie_init(void)
collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
+
+ sa11x0_ppc_configure_mcp();
+
+
platform_scoop_config = &collie_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
}
+ sa11x0_register_lcd(&collie_lcd_info);
sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
ARRAY_SIZE(collie_flash_resources));
sa11x0_register_mcp(&collie_mcp_data);