#include <asm/mipsmtregs.h>
#include <asm/pm.h>
+#define GCR_CPC_BASE_OFS 0x0088
#define GCR_CL_COHERENCE_OFS 0x2008
#define GCR_CL_ID_OFS 0x2028
+#define CPC_CL_VC_STOP_OFS 0x2020
+#define CPC_CL_VC_RUN_OFS 0x2028
+
.extern mips_cm_base
.set noreorder
nop
.endm
+ /*
+ * Set dest to non-zero if the core supports MIPSr6 multithreading
+ * (ie. VPs), else zero. If MIPSr6 multithreading is not supported then
+ * branch to nomt.
+ */
+ .macro has_vp dest, nomt
+ mfc0 \dest, CP0_CONFIG, 1
+ bgez \dest, \nomt
+ mfc0 \dest, CP0_CONFIG, 2
+ bgez \dest, \nomt
+ mfc0 \dest, CP0_CONFIG, 3
+ bgez \dest, \nomt
+ mfc0 \dest, CP0_CONFIG, 4
+ bgez \dest, \nomt
+ mfc0 \dest, CP0_CONFIG, 5
+ andi \dest, \dest, MIPS_CONF5_VP
+ beqz \dest, \nomt
+ nop
+ .endm
+
+ /* Calculate an uncached address for the CM GCRs */
+ .macro cmgcrb dest
+ .set push
+ .set noat
+ MFC0 $1, CP0_CMGCRBASE
+ PTR_SLL $1, $1, 4
+ PTR_LI \dest, UNCAC_BASE
+ PTR_ADDU \dest, \dest, $1
+ .set pop
+ .endm
+
.section .text.cps-vec
.balign 0x1000
li t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
mtc0 t0, CP0_STATUS
+ /* Skip cache & coherence setup if we're already coherent */
+ cmgcrb v1
+ lw s7, GCR_CL_COHERENCE_OFS(v1)
+ bnez s7, 1f
+ nop
+
/* Initialize the L1 caches */
jal mips_cps_cache_init
nop
+ /* Enter the coherent domain */
+ li t0, 0xff
+ sw t0, GCR_CL_COHERENCE_OFS(v1)
+ ehb
+
/* Set Kseg0 CCA to that in s0 */
- mfc0 t0, CP0_CONFIG
+1: mfc0 t0, CP0_CONFIG
ori t0, 0x7
xori t0, 0x7
or t0, t0, s0
mtc0 t0, CP0_CONFIG
ehb
- /* Calculate an uncached address for the CM GCRs */
- MFC0 v1, CP0_CMGCRBASE
- PTR_SLL v1, v1, 4
- PTR_LI t0, UNCAC_BASE
- PTR_ADDU v1, v1, t0
-
- /* Enter the coherent domain */
- li t0, 0xff
- sw t0, GCR_CL_COHERENCE_OFS(v1)
- ehb
-
/* Jump to kseg0 */
PTR_LA t0, 1f
jr t0
nop
/*
- * We're up, cached & coherent. Perform any further required core-level
- * initialisation.
+ * We're up, cached & coherent. Perform any EVA initialization necessary
+ * before we access memory.
*/
-1: jal mips_cps_core_init
+1: eva_init
+
+ /* Retrieve boot configuration pointers */
+ jal mips_cps_get_bootcfg
+ nop
+
+ /* Skip core-level init if we started up coherent */
+ bnez s7, 1f
nop
- /* Do any EVA initialization if necessary */
- eva_init
+ /* Perform any further required core-level initialisation */
+ jal mips_cps_core_init
+ nop
/*
* Boot any other VPEs within this core that should be online, and
* deactivate this VPE if it should be offline.
*/
+ move a1, t9
jal mips_cps_boot_vpes
- nop
+ move a0, v0
/* Off we go! */
- PTR_L t1, VPEBOOTCFG_PC(v0)
- PTR_L gp, VPEBOOTCFG_GP(v0)
- PTR_L sp, VPEBOOTCFG_SP(v0)
+1: PTR_L t1, VPEBOOTCFG_PC(v1)
+ PTR_L gp, VPEBOOTCFG_GP(v1)
+ PTR_L sp, VPEBOOTCFG_SP(v1)
jr t1
nop
END(mips_cps_core_entry)
.org 0x480
LEAF(excep_ejtag)
- DUMP_EXCEP("EJTAG")
PTR_LA k0, ejtag_debug_handler
jr k0
nop
nop
END(mips_cps_core_init)
-LEAF(mips_cps_boot_vpes)
- /* Retrieve CM base address */
- PTR_LA t0, mips_cm_base
- PTR_L t0, 0(t0)
-
+/**
+ * mips_cps_get_bootcfg() - retrieve boot configuration pointers
+ *
+ * Returns: pointer to struct core_boot_config in v0, pointer to
+ * struct vpe_boot_config in v1, VPE ID in t9
+ */
+LEAF(mips_cps_get_bootcfg)
/* Calculate a pointer to this cores struct core_boot_config */
+ cmgcrb t0
lw t0, GCR_CL_ID_OFS(t0)
li t1, COREBOOTCFG_SIZE
mul t0, t0, t1
PTR_LA t1, mips_cps_core_bootcfg
PTR_L t1, 0(t1)
- PTR_ADDU t0, t0, t1
+ PTR_ADDU v0, t0, t1
/* Calculate this VPEs ID. If the core doesn't support MT use 0 */
li t9, 0
-#ifdef CONFIG_MIPS_MT_SMP
+#if defined(CONFIG_CPU_MIPSR6)
+ has_vp ta2, 1f
+
+ /*
+ * Assume non-contiguous numbering. Perhaps some day we'll need
+ * to handle contiguous VP numbering, but no such systems yet
+ * exist.
+ */
+ mfc0 t9, $3, 1
+ andi t9, t9, 0xff
+#elif defined(CONFIG_MIPS_MT_SMP)
has_mt ta2, 1f
/* Find the number of VPEs present in the core */
1: /* Calculate a pointer to this VPEs struct vpe_boot_config */
li t1, VPEBOOTCFG_SIZE
- mul v0, t9, t1
- PTR_L ta3, COREBOOTCFG_VPECONFIG(t0)
- PTR_ADDU v0, v0, ta3
-
-#ifdef CONFIG_MIPS_MT_SMP
+ mul v1, t9, t1
+ PTR_L ta3, COREBOOTCFG_VPECONFIG(v0)
+ PTR_ADDU v1, v1, ta3
- /* If the core doesn't support MT then return */
- bnez ta2, 1f
- nop
jr ra
nop
+ END(mips_cps_get_bootcfg)
+
+LEAF(mips_cps_boot_vpes)
+ PTR_L ta2, COREBOOTCFG_VPEMASK(a0)
+ PTR_L ta3, COREBOOTCFG_VPECONFIG(a0)
+
+#if defined(CONFIG_CPU_MIPSR6)
+
+ has_vp t0, 5f
+
+ /* Find base address of CPC */
+ cmgcrb t3
+ PTR_L t1, GCR_CPC_BASE_OFS(t3)
+ PTR_LI t2, ~0x7fff
+ and t1, t1, t2
+ PTR_LI t2, UNCAC_BASE
+ PTR_ADD t1, t1, t2
+
+ /* Start any other VPs that ought to be running */
+ PTR_S ta2, CPC_CL_VC_RUN_OFS(t1)
+
+ /* Ensure this VP stops running if it shouldn't be */
+ not ta2
+ PTR_S ta2, CPC_CL_VC_STOP_OFS(t1)
+ ehb
+
+#elif defined(CONFIG_MIPS_MT)
.set push
.set mt
-1: /* Enter VPE configuration state */
+ /* If the core doesn't support MT then return */
+ has_mt t0, 5f
+
+ /* Enter VPE configuration state */
dvpe
PTR_LA t1, 1f
jr.hb t1
ehb
/* Loop through each VPE */
- PTR_L ta2, COREBOOTCFG_VPEMASK(t0)
move t8, ta2
li ta1, 0
/* Check whether this VPE is meant to be running */
li t0, 1
- sll t0, t0, t9
+ sll t0, t0, a1
and t0, t0, t8
bnez t0, 2f
nop
#endif /* CONFIG_MIPS_MT_SMP */
/* Return */
- jr ra
+5: jr ra
nop
END(mips_cps_boot_vpes)