-->
<!-- These resources are around just to allow their values to be customized
- for different hardware and product builds. Do not translate. -->
+ for different hardware and product builds. Do not translate.
+
+ NOTE: The naming convention is "config_camelCaseValue". Some legacy
+ entries do not follow the convention, but all new entries should. -->
+
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- Do not translate. Defines the slots for the right-hand side icons. That is to say, the
icons in the status bar that are not notifications. -->
<string-array name="config_statusBarIcons">
- <item><xliff:g id="id">managed_profile</xliff:g></item>
- <item><xliff:g id="id">ime</xliff:g></item>
- <item><xliff:g id="id">sync_failing</xliff:g></item>
- <item><xliff:g id="id">sync_active</xliff:g></item>
- <item><xliff:g id="id">cast</xliff:g></item>
- <item><xliff:g id="id">hotspot</xliff:g></item>
- <item><xliff:g id="id">location</xliff:g></item>
- <item><xliff:g id="id">bluetooth</xliff:g></item>
- <item><xliff:g id="id">nfc</xliff:g></item>
- <item><xliff:g id="id">tty</xliff:g></item>
- <item><xliff:g id="id">speakerphone</xliff:g></item>
- <item><xliff:g id="id">zen</xliff:g></item>
- <item><xliff:g id="id">mute</xliff:g></item>
- <item><xliff:g id="id">volume</xliff:g></item>
- <item><xliff:g id="id">wifi</xliff:g></item>
- <item><xliff:g id="id">cdma_eri</xliff:g></item>
- <item><xliff:g id="id">data_connection</xliff:g></item>
- <item><xliff:g id="id">phone_evdo_signal</xliff:g></item>
- <item><xliff:g id="id">phone_signal</xliff:g></item>
- <item><xliff:g id="id">battery</xliff:g></item>
- <item><xliff:g id="id">alarm_clock</xliff:g></item>
- <item><xliff:g id="id">secure</xliff:g></item>
- <item><xliff:g id="id">clock</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_rotate</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_headset</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_data_saver</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_managed_profile</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_ime</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_sync_failing</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_sync_active</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_cast</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_hotspot</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_location</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_bluetooth</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_nfc</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_tty</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_speakerphone</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_zen</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_mute</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_volume</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_vpn</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_ethernet</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_wifi</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_mobile</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_airplane</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_cdma_eri</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_data_connection</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_phone_evdo_signal</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_phone_signal</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_battery</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_alarm_clock</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_secure</xliff:g></item>
+ <item><xliff:g id="id">@string/status_bar_clock</xliff:g></item>
</string-array>
+ <string translatable="false" name="status_bar_rotate">rotate</string>
+ <string translatable="false" name="status_bar_headset">headset</string>
+ <string translatable="false" name="status_bar_data_saver">data_saver</string>
+ <string translatable="false" name="status_bar_managed_profile">managed_profile</string>
+ <string translatable="false" name="status_bar_ime">ime</string>
+ <string translatable="false" name="status_bar_sync_failing">sync_failing</string>
+ <string translatable="false" name="status_bar_sync_active">sync_active</string>
+ <string translatable="false" name="status_bar_cast">cast</string>
+ <string translatable="false" name="status_bar_hotspot">hotspot</string>
+ <string translatable="false" name="status_bar_location">location</string>
+ <string translatable="false" name="status_bar_bluetooth">bluetooth</string>
+ <string translatable="false" name="status_bar_nfc">nfc</string>
+ <string translatable="false" name="status_bar_tty">tty</string>
+ <string translatable="false" name="status_bar_speakerphone">speakerphone</string>
+ <string translatable="false" name="status_bar_zen">zen</string>
+ <string translatable="false" name="status_bar_mute">mute</string>
+ <string translatable="false" name="status_bar_volume">volume</string>
+ <string translatable="false" name="status_bar_wifi">wifi</string>
+ <string translatable="false" name="status_bar_cdma_eri">cdma_eri</string>
+ <string translatable="false" name="status_bar_data_connection">data_connection</string>
+ <string translatable="false" name="status_bar_phone_evdo_signal">phone_evdo_signal</string>
+ <string translatable="false" name="status_bar_phone_signal">phone_signal</string>
+ <string translatable="false" name="status_bar_battery">battery</string>
+ <string translatable="false" name="status_bar_alarm_clock">alarm_clock</string>
+ <string translatable="false" name="status_bar_secure">secure</string>
+ <string translatable="false" name="status_bar_clock">clock</string>
+ <string translatable="false" name="status_bar_mobile">mobile</string>
+ <string translatable="false" name="status_bar_vpn">vpn</string>
+ <string translatable="false" name="status_bar_ethernet">ethernet</string>
+ <string translatable="false" name="status_bar_airplane">airplane</string>
+
<!-- Flag indicating whether the surface flinger has limited
alpha compositing functionality in hardware. If set, the window
manager will disable alpha trasformation in animations where not
<integer name="config_activityShortDur">150</integer>
<integer name="config_activityDefaultDur">220</integer>
+ <!-- The duration (in milliseconds) of the tooltip show/hide animations. -->
+ <integer name="config_tooltipAnimTime">150</integer>
+
<!-- Duration for the dim animation behind a dialog. This may be either
a percentage, which is relative to the duration of the enter/open
animation of the window being shown that is dimming behind, or it may
fading edges is prohibitively expensive on most GPUs. -->
<bool name="config_ui_enableFadingMarquee">false</bool>
+ <!-- Enables or disables haptic effect when the text insertion/selection handle is moved
+ manually by the user. Off by default, since the expected haptic feedback may not be
+ available on some devices. -->
+ <bool name="config_enableHapticTextHandle">false</bool>
+
<!-- Whether dialogs should close automatically when the user touches outside
of them. This should not normally be modified. -->
<bool name="config_closeDialogWhenTouchOutside">true</bool>
<item>"mobile,0,0,0,-1,true"</item>
<item>"mobile_mms,2,0,2,60000,true"</item>
<item>"mobile_supl,3,0,2,60000,true"</item>
+ <item>"mobile_dun,4,0,2,60000,true"</item>
<item>"mobile_hipri,5,0,3,60000,true"</item>
<item>"mobile_fota,10,0,2,60000,true"</item>
<item>"mobile_ims,11,0,2,60000,true"</item>
<item>"0,1"</item>
</string-array>
- <!-- Set of NetworkInfo.getType() that reflect data usage. -->
- <integer-array translatable="false" name="config_data_usage_network_types">
- <item>0</item> <!-- TYPE_MOBILE -->
- <item>2</item> <!-- TYPE_MOBILE_MMS -->
- <item>3</item> <!-- TYPE_MOBILE_SUPL -->
- <item>4</item> <!-- TYPE_MOBILE_DUN -->
- <item>5</item> <!-- TYPE_MOBILE_HIPRI -->
- <item>10</item> <!-- TYPE_MOBILE_FOTA -->
- <item>11</item> <!-- TYPE_MOBILE_IMS -->
- <item>12</item> <!-- TYPE_MOBILE_CBS -->
- <item>14</item> <!-- TYPE_MOBILE_IA -->
- </integer-array>
-
<!-- The maximum duration (in milliseconds) we expect a network transition to take -->
<integer name="config_networkTransitionTimeout">60000</integer>
+ <!-- Whether/how to notify the user on network switches. See LingerMonitor.java. -->
+ <integer translatable="false" name="config_networkNotifySwitchType">0</integer>
+
+ <!-- What types of network switches to notify. See LingerMonitor.java. -->
+ <string-array translatable="false" name="config_networkNotifySwitches">
+ </string-array>
+
+ <!-- Whether the device should automatically switch away from Wi-Fi networks that lose
+ Internet access. Actual device behaviour is controlled by
+ Settings.Global.NETWORK_AVOID_BAD_WIFI. This is the default value of that setting. -->
+ <integer translatable="false" name="config_networkAvoidBadWifi">1</integer>
+
+ <!-- If the hardware supports specially marking packets that caused a wakeup of the
+ main CPU, set this value to the mark used. -->
+ <integer name="config_networkWakeupPacketMark">0</integer>
+
+ <!-- Mask to use when checking skb mark defined in config_networkWakeupPacketMark above. -->
+ <integer name="config_networkWakeupPacketMask">0</integer>
+
+ <!-- Whether the APF Filter in the device should filter out IEEE 802.3 Frames
+ Those frames are identified by the field Eth-type having values
+ less than 0x600 -->
+ <bool translatable="false" name="config_apfDrop802_3Frames">true</bool>
+
+ <!-- Default value for ConnectivityManager.getMultipathPreference() on metered networks. Actual
+ device behaviour is controlled by Settings.Global.NETWORK_METERED_MULTIPATH_PREFERENCE.
+ This is the default value of that setting. -->
+ <integer translatable="false" name="config_networkMeteredMultipathPreference">0</integer>
+
<!-- List of regexpressions describing the interface (if any) that represent tetherable
USB interfaces. If the device doesn't want to support tethering over USB this should
be empty. An example would be "usb.*" -->
<!-- Activity name to enable wifi tethering after provisioning app succeeds -->
<string translatable="false" name="config_wifi_tether_enable">com.android.settings/.TetherService</string>
- <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering -->
- <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
- <!== [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
+ <!-- Controls the WiFi wakeup feature.
+ 0 = Not available.
+ 1 = Available.
+ -->
+ <integer translatable="false" name="config_wifi_wakeup_available">0</integer>
+
+ <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering.
+
+ Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
+ [1,7,0] for TYPE_WIFI, TYPE_BLUETOOTH, and TYPE_MOBILE.
+
+ This list is also modified by code within the framework, including:
+
+ - TYPE_ETHERNET (9) is prepended to this list, and
+
+ - the return value of TelephonyManager.getTetherApnRequired()
+ determines how the array is further modified:
+
+ * DUN_REQUIRED
+ TYPE_MOBILE is removed (if present)
+ TYPE_MOBILE_HIPRI is removed (if present)
+ TYPE_MOBILE_DUN is appended (if not already present)
+
+ * DUN_NOT_REQUIRED
+ TYPE_MOBILE_DUN is removed (if present)
+ TYPE_MOBILE is appended (if not already present)
+ TYPE_MOBILE_HIPRI is appended (if not already present)
+
+ * DUN_UNSPECIFIED
+ if any of TYPE_MOBILE{,_DUN,_HIPRI} are present:
+ change nothing
+ else:
+ TYPE_MOBILE is appended
+ TYPE_MOBILE_HIPRI is appended
+
+ For other changes applied to this list, now and in the future, see
+ com.android.server.connectivity.tethering.TetheringConfiguration.
+
+ Note also: the order of this is important. The first upstream type
+ for which a satisfying network exists is used.
+ -->
<integer-array translatable="false" name="config_tether_upstream_types">
- <item>0</item>
<item>1</item>
- <item>5</item>
<item>7</item>
- <item>9</item>
+ <item>0</item>
</integer-array>
<!-- If the DUN connection for this CDMA device supports more than just DUN -->
<!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
<bool translatable="false" name="config_wifi_dual_band_support">false</bool>
- <!-- Boolean indicating whether Hotspot 2.0/Passpoint and ANQP queries is enabled -->
- <bool translatable="false" name="config_wifi_hotspot2_enabled">false</bool>
+ <!-- Boolean indicating whether 802.11r Fast BSS Transition is enabled on this platform -->
+ <bool translatable="false" name="config_wifi_fast_bss_transition_enabled">false</bool>
<!-- Device type information conforming to Annex B format in WiFi Direct specification.
The default represents a dual-mode smartphone -->
<!-- Boolean indicating we re-try re-associating once upon disconnection and RSSI is high failure -->
<bool translatable="true" name="config_wifi_enable_disconnection_debounce">true</bool>
- <!-- Boolean indicating autojoin will prefer 5GHz and choose 5GHz BSSIDs -->
- <bool translatable="true" name="config_wifi_enable_5GHz_preference">true</bool>
-
<!-- Boolean indicating whether or not to revert to default country code when cellular
radio is unable to find any MCC information to infer wifi country code from -->
<bool translatable="false" name="config_wifi_revert_country_code_on_cellular_loss">false</bool>
<!-- Boolean indicating whether or not wifi firmware debugging is enabled -->
- <bool translatable="false" name="config_wifi_enable_wifi_firmware_debugging">false</bool>
+ <bool translatable="false" name="config_wifi_enable_wifi_firmware_debugging">true</bool>
+
+ <!-- Integer size limit, in KB, for a single WifiLogger ringbuffer, in default logging mode -->
+ <integer translatable="false" name="config_wifi_logger_ring_buffer_default_size_limit_kb">32</integer>
+
+ <!-- Integer size limit, in KB, for a single WifiLogger ringbuffer, in verbose logging mode -->
+ <integer translatable="false" name="config_wifi_logger_ring_buffer_verbose_size_limit_kb">1024</integer>
+
+ <!-- Boolean indicating whether or not wifi should turn off when emergency call is made -->
+ <bool translatable="false" name="config_wifi_turn_off_during_emergency_call">false</bool>
<!-- Integer specifying the basic autojoin parameters -->
<integer translatable="false" name="config_wifi_framework_5GHz_preference_boost_threshold">-65</integer>
- <integer translatable="false" name="config_wifi_framework_5GHz_preference_boost_factor">5</integer>
- <integer translatable="false" name="config_wifi_framework_current_association_hysteresis_high">16</integer>
- <integer translatable="false" name="config_wifi_framework_current_association_hysteresis_low">10</integer>
+ <integer translatable="false" name="config_wifi_framework_5GHz_preference_boost_factor">40</integer>
<integer translatable="false" name="config_wifi_framework_5GHz_preference_penalty_threshold">-75</integer>
- <integer translatable="false" name="config_wifi_framework_5GHz_preference_penalty_factor">2</integer>
-
+ <integer translatable="false" name="config_wifi_framework_RSSI_SCORE_OFFSET">85</integer>
+ <integer translatable="false" name="config_wifi_framework_RSSI_SCORE_SLOPE">4</integer>
+ <integer translatable="false" name="config_wifi_framework_SAME_BSSID_AWARD">24</integer>
+ <integer translatable="false" name="config_wifi_framework_LAST_SELECTION_AWARD">480</integer>
+ <integer translatable="false" name="config_wifi_framework_PASSPOINT_SECURITY_AWARD">40</integer>
+ <integer translatable="false" name="config_wifi_framework_SECURITY_AWARD">80</integer>
+ <!-- Integer specifying the base interval in seconds for the exponential backoff scan for autojoin -->
+ <integer translatable="false" name="config_wifi_framework_exponential_backoff_scan_base_interval">20</integer>
+ <!-- Integers specifying the max packet Tx/Rx rates for full scan -->
+ <integer translatable="false" name="config_wifi_framework_max_tx_rate_for_full_scan">8</integer>
+ <integer translatable="false" name="config_wifi_framework_max_rx_rate_for_full_scan">16</integer>
+ <!-- Integers specifying the min packet Tx/Rx rates in packets per second for staying on the same network -->
+ <integer translatable="false" name="config_wifi_framework_min_tx_rate_for_staying_on_network">16</integer>
+ <integer translatable="false" name="config_wifi_framework_min_rx_rate_for_staying_on_network">16</integer>
<!-- Integer parameters of the wifi to cellular handover feature
wifi should not stick to bad networks -->
<integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-82</integer>
- <integer translatable="false" name="config_wifi_framework_wifi_score_low_rssi_threshold_5GHz">-72</integer>
- <integer translatable="false" name="config_wifi_framework_wifi_score_good_rssi_threshold_5GHz">-60</integer>
- <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-87</integer>
- <integer translatable="false" name="config_wifi_framework_wifi_score_low_rssi_threshold_24GHz">-77</integer>
- <integer translatable="false" name="config_wifi_framework_wifi_score_good_rssi_threshold_24GHz">-65</integer>
+ <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_5GHz">-82</integer>
+ <integer translatable="false" name="config_wifi_framework_wifi_score_low_rssi_threshold_5GHz">-70</integer>
+ <integer translatable="false" name="config_wifi_framework_wifi_score_good_rssi_threshold_5GHz">-57</integer>
+ <integer translatable="false" name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-85</integer>
+ <integer translatable="false" name="config_wifi_framework_wifi_score_entry_rssi_threshold_24GHz">-85</integer>
+ <integer translatable="false" name="config_wifi_framework_wifi_score_low_rssi_threshold_24GHz">-73</integer>
+ <integer translatable="false" name="config_wifi_framework_wifi_score_good_rssi_threshold_24GHz">-60</integer>
<integer translatable="false" name="config_wifi_framework_wifi_score_bad_link_speed_24">6</integer>
<integer translatable="false" name="config_wifi_framework_wifi_score_bad_link_speed_5">12</integer>
<integer translatable="false" name="config_wifi_framework_wifi_score_good_link_speed_24">24</integer>
<integer translatable="false" name="config_wifi_framework_wifi_score_good_link_speed_5">36</integer>
+
<string translatable="false" name="config_wifi_random_mac_oui">DA-A1-19</string>
<string translatable="false" name="config_wifi_framework_sap_2G_channel_list">1,6,11</string>
<!-- Integer indicating disconnect mode short scan interval in milliseconds -->
<integer translatable="false" name="config_wifi_disconnected_short_scan_interval">15000</integer>
- <!-- Integer indicating disconnect mode long scan interval in milliseconds -->
- <integer translatable="false" name="config_wifi_disconnected_long_scan_interval">120000</integer>
-
<!-- Integer indicating associated partial scan short interval in milliseconds -->
<integer translatable="false" name="config_wifi_associated_short_scan_interval">20000</integer>
- <!-- Integer indicating associated partial scan long interval in milliseconds -->
- <integer translatable="false" name="config_wifi_associated_long_scan_interval">180000</integer>
-
<!-- Integer indicating associated full scan backoff, representing a fraction: xx/8 -->
<integer translatable="false" name="config_wifi_framework_associated_full_scan_backoff">12</integer>
<!-- Integer indicating associated full scan max num active channels -->
<integer translatable="false" name="config_wifi_framework_associated_partial_scan_max_num_active_channels">6</integer>
- <!-- Integer indicating associated full scan max num passive channels -->
- <integer translatable="false" name="config_wifi_framework_associated_partial_scan_max_num_passive_channels">3</integer>
-
- <!-- Integer indicating number of association errors leading to blacklisting of the network -->
- <integer translatable="false" name="config_wifi_framework_max_connection_errors_to_blacklist">4</integer>
-
- <!-- Integer indicating number of authentication errors leading to blacklisting of the network -->
- <integer translatable="false" name="config_wifi_framework_max_auth_errors_to_blacklist">4</integer>
-
- <!-- Integer indicating minimum blacklisting delay of a wofo configuration due to connectin or auth errors -->
- <integer translatable="false" name="config_wifi_framework_network_black_list_min_time_milli">120000</integer>
-
<!-- Integer indicating RSSI boost given to current network -->
- <integer translatable="false" name="config_wifi_framework_current_network_boost">25</integer>
+ <integer translatable="false" name="config_wifi_framework_current_network_boost">16</integer>
<!-- Integer indicating how to handle beacons with uninitialized RSSI value of 0 -->
<integer translatable="false" name="config_wifi_framework_scan_result_rssi_level_patchup_value">-85</integer>
<!-- Boolean indicating that wifi only link configuratios that have exact same credentials (i.e PSK) -->
<bool translatable="false" name="config_wifi_only_link_same_credential_configurations">true</bool>
- <!-- Wifi driver stop delay, in milliseconds.
- Default value is 2 minutes. -->
- <integer translatable="false" name="config_wifi_driver_stop_delay">120000</integer>
+ <!-- Boolean indicating whether framework needs to set the tx power limit for meeting SAR requirements
+ during voice calls -->
+ <bool translatable="false" name="config_wifi_framework_enable_voice_call_sar_tx_power_limit">false</bool>
<!-- Wifi driver supports batched scan -->
<bool translatable="false" name="config_wifi_batched_scan_supported">false</bool>
- <!-- Wifi HAL supported PNO -->
- <bool translatable="false" name="config_wifi_hal_pno_enable">false</bool>
-
- <!-- Wifi SSID white list (can't be enabled if config_wifi_hal_pno_enable is not) -->
- <bool translatable="false" name="config_wifi_ssid_white_list_enable">true</bool>
-
<!-- Idle Receive current for wifi radio. 0 by default-->
<integer translatable="false" name="config_wifi_idle_receive_cur_ma">0</integer>
<bool name="config_automatic_brightness_available">false</bool>
<!-- Fast brightness animation ramp rate in brightness units per second-->
- <integer translatable="false" name="config_brightness_ramp_rate_fast">200</integer>
+ <integer translatable="false" name="config_brightness_ramp_rate_fast">180</integer>
<!-- Slow brightness animation ramp rate in brightness units per second-->
- <integer translatable="false" name="config_brightness_ramp_rate_slow">40</integer>
+ <integer translatable="false" name="config_brightness_ramp_rate_slow">60</integer>
<!-- Don't name config resources like this. It should look like config_annoyDianne -->
<bool name="config_annoy_dianne">true</bool>
<!-- rotation: 270 (rotate CW) --> <item>-25</item> <item>65</item>
</integer-array>
- <!-- Indicate the name of the window orientation sensor type if present. A
- window orientation sensor produces values to be used in lieu of the
- typical, accelerometer based sensor. It must only produce integral
- values between 0 and 3, inclusive, with each one corresponding to a
- given rotation:
- 0: 0 degrees of rotation (natural)
- 1: 90 degrees of rotation (rotate CCW)
- 2: 180 degrees of rotation (reverse)
- 3: 270 degrees of rotation (rotate CW) -->
- <string name="config_orientationSensorType" translatable="false">@null</string>
-
<!-- Lid switch behavior -->
<!-- The number of degrees to rotate the display when the keyboard is open.
closed. The default is 0. -->
<integer name="config_lidNavigationAccessibility">0</integer>
+ <!-- Indicate whether closing the lid causes the lockscreen to appear.
+ The default is false. -->
+ <bool name="config_lidControlsScreenLock">false</bool>
+
<!-- Indicate whether closing the lid causes the device to go to sleep and opening
it causes the device to wake up.
The default is false. -->
<bool name="config_carDockEnablesAccelerometer">true</bool>
+ <!-- Control whether to launch Car dock home app when user presses home button or when
+ car dock intent is fired.
+ In mobile device, usually separate home app is expected in car mode, and this should be
+ enabled. But in environments like real car, default home app may be enough, and in that
+ case, this can be disabled (set to false). -->
+ <bool name="config_enableCarDockHomeLaunch">true</bool>
+
<!-- HDMI behavior -->
<!-- The number of degrees to rotate the display when the device has HDMI connected
4 UI_MODE_TYPE_TELEVISION
5 UI_MODE_TYPE_APPLIANCE
6 UI_MODE_TYPE_WATCH
+ 7 UI_MODE_TYPE_VR_HEADSET
Any other values will have surprising consequences. -->
<integer name="config_defaultUiModeType">1</integer>
+ <!-- Control whether to lock UI mode to what is selected from config_defaultUiModeType.
+ Once UI mode is locked, applications cannot change it anymore. -->
+ <bool name="config_lockUiMode">false</bool>
+
+ <!-- Control whether to lock day/night mode change from normal application. When it is
+ true, day / night mode change is only allowed to apps with MODIFY_DAY_NIGHT_MODE
+ permission. -->
+ <bool name="config_lockDayNightMode">false</bool>
+
<!-- Control the default night mode to use when there is no other mode override set.
One of the following values (see UiModeManager.java):
0 - MODE_NIGHT_AUTO
-->
<integer name="config_defaultNightMode">1</integer>
+ <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently
+ in hardware. -->
+ <bool name="config_setColorTransformAccelerated">false</bool>
+
+ <!-- Control whether Night display is available. This should only be enabled on devices
+ that have a HWC implementation that can apply the matrix passed to setColorTransform
+ without impacting power, performance, and app compatibility (e.g. protected content). -->
+ <bool name="config_nightDisplayAvailable">@bool/config_setColorTransformAccelerated</bool>
+
+ <!-- Default mode to control how Night display is automatically activated.
+ One of the following values (see NightDisplayController.java):
+ 0 - AUTO_MODE_DISABLED
+ 1 - AUTO_MODE_CUSTOM
+ 2 - AUTO_MODE_TWILIGHT
+ -->
+ <integer name="config_defaultNightDisplayAutoMode">0</integer>
+
+ <!-- Default time when Night display is automatically activated.
+ Represented as milliseconds from midnight (e.g. 79200000 == 10pm). -->
+ <integer name="config_defaultNightDisplayCustomStartTime">79200000</integer>
+
+ <!-- Default time when Night display is automatically deactivated.
+ Represented as milliseconds from midnight (e.g. 21600000 == 6am). -->
+ <integer name="config_defaultNightDisplayCustomEndTime">21600000</integer>
+
+ <!-- Minimum color temperature, in Kelvin, supported by Night display. -->
+ <integer name="config_nightDisplayColorTemperatureMin">2596</integer>
+
+ <!-- Default color temperature, in Kelvin, to tint the screen when Night display is
+ activated. -->
+ <integer name="config_nightDisplayColorTemperatureDefault">2850</integer>
+
+ <!-- Maximum color temperature, in Kelvin, supported by Night display. -->
+ <integer name="config_nightDisplayColorTemperatureMax">4082</integer>
+
+ <string-array name="config_nightDisplayColorTemperatureCoefficientsNative">
+ <!-- R a-coefficient --> <item>0.0</item>
+ <!-- R b-coefficient --> <item>0.0</item>
+ <!-- R y-intercept --> <item>1.0</item>
+ <!-- G a-coefficient --> <item>-0.00000000962353339</item>
+ <!-- G b-coefficient --> <item>0.000153045476</item>
+ <!-- G y-intercept --> <item>0.390782778</item>
+ <!-- B a-coefficient --> <item>-0.0000000189359041</item>
+ <!-- B b-coefficient --> <item>0.000302412211</item>
+ <!-- B y-intercept --> <item>-0.198650895</item>
+ </string-array>
+
+ <string-array name="config_nightDisplayColorTemperatureCoefficients">
+ <!-- R a-coefficient --> <item>0.0</item>
+ <!-- R b-coefficient --> <item>0.0</item>
+ <!-- R y-intercept --> <item>1.0</item>
+ <!-- G a-coefficient --> <item>-0.00000000962353339</item>
+ <!-- G b-coefficient --> <item>0.000153045476</item>
+ <!-- G y-intercept --> <item>0.390782778</item>
+ <!-- B a-coefficient --> <item>-0.0000000189359041</item>
+ <!-- B b-coefficient --> <item>0.000302412211</item>
+ <!-- B y-intercept --> <item>-0.198650895</item>
+ </string-array>
+
<!-- Indicate whether to allow the device to suspend when the screen is off
due to the proximity sensor. This resource should only be set to true
if the sensor HAL correctly handles the proximity sensor as a wake-up source.
-->
<integer name="config_longPressOnPowerBehavior">1</integer>
+ <!-- Control the behavior when the user long presses the back button. Non-zero values are only
+ valid for watches as part of CDD/CTS.
+ 0 - Nothing
+ 1 - Go to voice assist
+ -->
+ <integer name="config_longPressOnBackBehavior">0</integer>
+
+ <!-- Control the behavior when the user panic presses the back button.
+ 0 - Nothing
+ 1 - Go to home
+ -->
+ <integer name="config_backPanicBehavior">0</integer>
+
<!-- Control the behavior when the user short presses the power button.
0 - Nothing
1 - Go to sleep (doze)
2 - Really go to sleep (don't doze)
3 - Really go to sleep and go home (don't doze)
+ 4 - Go to home
+ 5 - Dismiss IME if shown. Otherwise go to home
-->
<integer name="config_shortPressOnPowerBehavior">1</integer>
<item>30</item>
</integer-array>
- <!-- Vibrator pattern for feedback about booting with safe mode disabled -->
- <integer-array name="config_safeModeDisabledVibePattern">
- <item>0</item>
- <item>1</item>
- <item>20</item>
- <item>21</item>
- </integer-array>
-
- <!-- Vibrator pattern for feedback about booting with safe mode disabled -->
+ <!-- Vibrator pattern for feedback about booting with safe mode enabled -->
<integer-array name="config_safeModeEnabledVibePattern">
<item>0</item>
<item>1</item>
<item>10</item>
</integer-array>
- <!-- Vibrator pattern for feedback about a context click -->
- <integer-array name="config_contextClickVibePattern">
- <item>0</item>
- <item>1</item>
- <item>20</item>
- <item>21</item>
- </integer-array>
-
<bool name="config_use_strict_phone_number_comparation">false</bool>
<!-- Display low battery warning when battery level dips to this value.
<!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
<bool name="config_intrusiveNotificationLed">false</bool>
+ <!-- De we do icon badges? Used to decide if there should be a disable option-->
+ <bool name="config_notificationBadging">true</bool>
+
<!-- Default value for LED off time when the battery is low on charge in miliseconds -->
<integer name="config_notificationsBatteryLedOff">2875</integer>
If so, this should be set to 'false' in an overlay. -->
<bool name="config_enable_emergency_call_while_sim_locked">true</bool>
+ <!-- Is the lock-screen disabled for new users by default -->
+ <bool name="config_disableLockscreenByDefault">false</bool>
+
+ <!-- If true, enables verification of the lockscreen credential in the factory reset protection
+ flow. This should be true if gatekeeper / weaver credentials can still be checked after a
+ factory reset. -->
+ <bool name="config_enableCredentialFactoryResetProtection">true</bool>
+
<!-- Control the behavior when the user long presses the home button.
0 - Nothing
- 1 - Recent apps view in SystemUI
+ 1 - Launch all apps intent
2 - Launch assist intent
This needs to match the constants in
policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
Must be in the range specified by minimum and maximum. -->
<integer name="config_screenBrightnessSettingDefault">102</integer>
+ <!-- Default screen brightness for VR setting. -->
+ <integer name="config_screenBrightnessForVrSettingDefault">86</integer>
+
+ <!-- Minimum screen brightness setting allowed for VR. Device panels start increasing pulse
+ width as brightness decreases below this theshold. -->
+ <integer name="config_screenBrightnessForVrSettingMinimum">79</integer>
+
+ <!-- Maximum screen brightness setting allowed for VR. -->
+ <integer name="config_screenBrightnessForVrSettingMaximum">255</integer>
+
<!-- Screen brightness used to dim the screen while dozing in a very low power state.
May be less than the minimum allowed brightness setting
that can be set by the user. -->
<integer name="config_screenBrightnessDoze">1</integer>
+ <!-- Whether or not to skip the initial brightness ramps when the display transitions to
+ STATE_ON. Setting this to true will skip the brightness ramp to the last stored active
+ brightness value and will repeat for the following ramp if autobrightness is enabled. -->
+ <bool name="config_skipScreenOnBrightnessRamp">false</bool>
+
<!-- Allow automatic adjusting of the screen brightness while dozing in low power state. -->
<bool name="config_allowAutoBrightnessWhileDozing">false</bool>
<integer name="config_autoBrightnessBrighteningLightDebounce">4000</integer>
<integer name="config_autoBrightnessDarkeningLightDebounce">8000</integer>
+ <!-- Initial light sensor event rate in milliseconds for automatic brightness control. This is
+ used for obtaining the first light sample when the device stops dozing.
+
+ Set this to -1 to disable this feature. -->
+ <integer name="config_autoBrightnessInitialLightSensorRate">-1</integer>
+
<!-- Light sensor event rate in milliseconds for automatic brightness control. -->
<integer name="config_autoBrightnessLightSensorRate">250</integer>
+ <!-- The maximum range of gamma adjustment possible using the screen
+ auto-brightness adjustment setting. -->
+ <fraction name="config_autoBrightnessAdjustmentMaxGamma">300%</fraction>
+
<!-- If we allow automatic adjustment of screen brightness while dozing, how many times we want
to reduce it to preserve the battery. Value of 100% means no scaling. -->
<fraction name="config_screenAutoBrightnessDozeScaleFactor">100%</fraction>
adapt to the environment. This mode may be better suited for watches. -->
<bool name="config_autoBrightnessResetAmbientLuxAfterWarmUp">true</bool>
+ <!-- Period of time in which to consider light samples in milliseconds. -->
+ <integer name="config_autoBrightnessAmbientLightHorizon">10000</integer>
+
<!-- Screen brightness used to dim the screen when the user activity
timeout expires. May be less than the minimum allowed brightness setting
that can be set by the user. -->
This feature should be disabled for most devices. -->
<integer name="config_virtualKeyQuietTimeMillis">0</integer>
+ <!-- A list of potential packages, in priority order, that may contain an
+ ephemeral resolver. Each package will be be queried for a component
+ that has been granted the PACKAGE_EPHEMERAL_AGENT permission.
+ This may be empty if ephemeral apps are not supported. -->
+ <string-array name="config_ephemeralResolverPackage" translatable="false">
+ <!-- Add packages here -->
+ </string-array>
+
<!-- Component name of the default wallpaper. This will be ImageWallpaper if not
specified -->
<string name="default_wallpaper_component" translatable="false">@null</string>
+ <!-- By default a product has no distinct default lock wallpaper -->
+ <item name="default_lock_wallpaper" type="drawable">@null</item>
+
<!-- Component name of the built in wallpaper used to display bitmap wallpapers. This must not be null. -->
<string name="image_wallpaper_component" translatable="false">com.android.systemui/com.android.systemui.ImageWallpaper</string>
<!-- True if WallpaperService is enabled -->
<bool name="config_enableWallpaperService">true</bool>
+ <!-- Enables the TimeZoneRuleManager service. This is the master switch for the updateable time
+ zone update mechanism. -->
+ <bool name="config_enableUpdateableTimeZoneRules">false</bool>
+
+ <!-- Enables APK-based time zone update triggering. Set this to false when updates are triggered
+ via external events and not by APK updates. For example, if an updater checks with a server
+ on a regular schedule.
+ [This is only used if config_enableUpdateableTimeZoneRules is true.] -->
+ <bool name="config_timeZoneRulesUpdateTrackingEnabled">false</bool>
+
+ <!-- The package of the time zone rules updater application. Expected to be the same
+ for all Android devices that support APK-based time zone rule updates.
+ A package-targeted com.android.intent.action.timezone.TRIGGER_RULES_UPDATE_CHECK intent
+ will be sent to the updater app if the system server detects an update to the updater or
+ data app packages.
+ The package referenced here must have the android.permission.UPDATE_TIME_ZONE_RULES
+ permission.
+ [This is only used if config_enableUpdateableTimeZoneRules and
+ config_timeZoneRulesUpdateTrackingEnabled are true.] -->
+ <string name="config_timeZoneRulesUpdaterPackage" translateable="false">com.android.timezone.updater</string>
+
+ <!-- The package of the time zone rules data application. Expected to be configured
+ by OEMs to reference their own priv-app APK package.
+ A package-targeted com.android.intent.action.timezone.TRIGGER_RULES_UPDATE_CHECK intent
+ will be sent to the updater app if the system server detects an update to the updater or
+ data app packages.
+ [This is only used if config_enableUpdateableTimeZoneRules and
+ config_timeZoneRulesUpdateTrackingEnabled are true.] -->
+ <string name="config_timeZoneRulesDataPackage" translateable="false"></string>
+
+ <!-- The allowed time in milliseconds between an update check intent being broadcast and the
+ response being considered overdue. Reliability triggers will not fire in this time.
+ [This is only used if config_enableUpdateableTimeZoneRules and
+ config_timeZoneRulesUpdateTrackingEnabled are true.] -->
+ <!-- 5 minutes -->
+ <integer name="config_timeZoneRulesCheckTimeMillisAllowed">300000</integer>
+
+ <!-- The number of times a time zone update check is allowed to fail before the system will stop
+ reacting to reliability triggers.
+ [This is only used if config_enableUpdateableTimeZoneRules and
+ config_timeZoneRulesUpdateTrackingEnabled are true.] -->
+ <integer name="config_timeZoneRulesCheckRetryCount">5</integer>
+
<!-- Whether to enable network location overlay which allows network
location provider to be replaced by an app at run-time. When disabled,
only the config_networkLocationProviderPackageName package will be
config_enableFusedLocationOverlay is false. -->
<string name="config_fusedLocationProviderPackageName" translatable="false">com.android.location.fused</string>
+ <!-- The package name of the default network recommendation app.
+ A network recommendation provider must:
+ * Be granted the SCORE_NETWORKS permission.
+ * Be granted the ACCESS_COARSE_LOCATION permission.
+ * Include a Service for the android.net.scoring.RECOMMEND_NETWORKS action
+ protected by the BIND_NETWORK_RECOMMENDATION_SERVICE permission.
+
+ This must be set to a valid network recommendation app or empty.
+ -->
+ <string name="config_defaultNetworkRecommendationProviderPackage" translatable="false"></string>
+
<!-- Whether to enable Hardware FLP overlay which allows Hardware FLP to be
replaced by an app at run-time. When disabled, only the
config_hardwareFlpPackageName package will be searched for Hardware Flp,
<!-- Boolean indicating if current platform supports BLE peripheral mode -->
<bool name="config_bluetooth_le_peripheral_mode_supported">false</bool>
+ <!-- Boolean indicating if current platform supports HFP inband ringing -->
+ <bool name="config_bluetooth_hfp_inband_ringing_support">false</bool>
+
<!-- Max number of scan filters supported by blutooth controller. 0 if the
device does not support hardware scan filters-->
<integer translatable="false" name="config_bluetooth_max_scan_filters">0</integer>
<!-- Whether supported profiles should be reloaded upon enabling bluetooth -->
<bool name="config_bluetooth_reload_supported_profiles_when_enabled">false</bool>
+ <!-- Enabling autoconnect over pan -->
+ <bool name="config_bluetooth_pan_enable_autoconnect">false</bool>
+
<!-- The default data-use polling period. -->
<integer name="config_datause_polling_period_sec">600</integer>
device is data-only. -->
<bool name="config_voice_capable">true</bool>
+ <!-- Flag indicating whether all audio streams should be mapped to
+ one single stream. If true, all audio streams are mapped to
+ STREAM_MUSIC as if it's on TV platform. -->
+ <bool name="config_single_volume">false</bool>
+
<!-- Flag indicating that an outbound call must have a call capable phone account
that has declared it can process the call's handle. -->
<bool name="config_requireCallCapableAccountForHandle">false</bool>
Choices are: OFF, DELETE, TRUNCATE, PERSIST and MEMORY.
PERSIST may improve performance by reducing how often journal blocks are
reallocated (compared to truncation) resulting in better data block locality
- and less churn of the storage media. -->
- <string name="db_default_journal_mode" translatable="false">PERSIST</string>
+ and less churn of the storage media.
+
+ The PERSIST mode results in data persisting in the journal beyond the life of
+ a transaction, so it interacts poorly with SECURE_DELETE. -->
+ <string name="db_default_journal_mode" translatable="false">TRUNCATE</string>
<!-- Maximum size of the persistent journal file in bytes.
If the journal file grows to be larger than this amount then SQLite will
The size of the WAL file is also constrained by 'db_journal_size_limit'. -->
<integer name="db_wal_autocheckpoint">100</integer>
+ <!-- The number of milliseconds that SQLite connection is allowed to be idle before it
+ is closed and removed from the pool -->
+ <integer name="db_default_idle_connection_timeout">30000</integer>
+
<!-- Max space (in MB) allocated to DownloadManager to store the downloaded
files if they are to be stored in DownloadManager's data dir,
which typically is /data/data/com.android.providers.downloads/files -->
it should be disabled in that locale's resources. -->
<bool name="config_actionMenuItemAllCaps">true</bool>
- <!-- Whether action menu items should obey the "withText" showAsAction
- flag. This may be set to false for situations where space is
- extremely limited. -->
- <bool name="config_allowActionMenuItemTextWithIcon">false</bool>
-
<!-- Remote server that can provide NTP responses. -->
- <string translatable="false" name="config_ntpServer">2.android.pool.ntp.org</string>
+ <string translatable="false" name="config_ntpServer">time.android.com</string>
<!-- Normal polling frequency in milliseconds -->
<integer name="config_ntpPollingInterval">86400000</integer>
<!-- Try-again polling interval in milliseconds, in case the network request failed -->
<!-- If the time difference is greater than this threshold in milliseconds,
then update the time. -->
<integer name="config_ntpThreshold">5000</integer>
- <!-- Timeout to wait for NTP server response. -->
- <integer name="config_ntpTimeout">20000</integer>
+ <!-- Timeout to wait for NTP server response in milliseconds. -->
+ <integer name="config_ntpTimeout">5000</integer>
<!-- Default network policy warning threshold, in megabytes. -->
<integer name="config_networkPolicyDefaultWarning">2048</integer>
turned off and the screen off animation has been performed. -->
<bool name="config_dozeAfterScreenOff">false</bool>
+ <!-- Doze: should the TYPE_PICK_UP_GESTURE sensor be used as a pulse signal. -->
+ <bool name="config_dozePulsePickup">false</bool>
+
+ <!-- Type of the double tap sensor. Empty if double tap is not supported. -->
+ <string name="config_dozeDoubleTapSensorType" translatable="false"></string>
+
+ <!-- Type of the long press sensor. Empty if long press is not supported. -->
+ <string name="config_dozeLongPressSensorType" translatable="false"></string>
+
+ <!-- Control whether the always on display mode is available. This should only be enabled on
+ devices where the display has be tuned to be power efficient in DOZE and/or DOZE_SUSPEND
+ states. -->
+ <bool name="config_dozeAlwaysOnDisplayAvailable">false</bool>
+
+ <!-- Whether the display blanks itself when transitioning from a doze to a non-doze state -->
+ <bool name="config_displayBlanksAfterDoze">false</bool>
+
+ <!-- True if the display hardware only has brightness buckets rather than a full range of
+ backlight values -->
+ <bool name="config_displayBrightnessBucketsInDoze">false</bool>
+
<!-- Power Management: Specifies whether to decouple the auto-suspend state of the
device from the display on/off state.
-->
<fraction name="config_maximumScreenDimRatio">20%</fraction>
+ <!-- Minimum size of the scrollbar thumb's touch target. -->
+ <dimen name="config_minScrollbarTouchTarget">48dp</dimen>
+
<!-- Base "touch slop" value used by ViewConfiguration as a
movement threshold where scrolling should begin. -->
<dimen name="config_viewConfigurationTouchSlop">8dp</dimen>
<!-- Amount of time in ms the user needs to press the relevant key to bring up the global actions dialog -->
<integer name="config_globalActionsKeyTimeout">500</integer>
+ <!-- Default width of a vertical scrollbar and height of a horizontal scrollbar.
+ Takes effect only if the scrollbar drawables have no intrinsic size. -->
+ <dimen name="config_scrollbarSize">4dp</dimen>
+
+ <!-- Distance that should be scrolled, per axis value, in response to a horizontal
+ {@link MotionEvent#ACTION_SCROLL} event. -->
+ <dimen name="config_horizontalScrollFactor">64dp</dimen>
+
+ <!-- Distance that should be scrolled, per axis value, in response to a vertical
+ {@link MotionEvent#ACTION_SCROLL} event. -->
+ <dimen name="config_verticalScrollFactor">64dp</dimen>
+
+ <!-- Obsolete. Distance that should be scrolled, per axis value, in response to a
+ {@link MotionEvent#ACTION_SCROLL} event. -->
+ <dimen name="config_scrollFactor">64dp</dimen>
+
<!-- Maximum number of grid columns permitted in the ResolverActivity
used for picking activities to handle an intent. -->
<integer name="config_maxResolverActivityColumns">3</integer>
<!-- Maximum number of supported users -->
<integer name="config_multiuserMaximumUsers">1</integer>
+
<!-- Whether UI for multi user should be shown -->
<bool name="config_enableMultiUserUI">false</bool>
Do not set this to true for production devices. Doing so will cause you to fail CTS. -->
<bool name="config_disableUsbPermissionDialogs">false</bool>
+ <!-- Activity to handle Usb Device connection in USB Host side. Keeping it to null value will
+ lead into handling it inside system using Intent resolution. Non-null contents will have
+ format of package-name/ActivityClassName. -->
+ <string name="config_UsbDeviceConnectionHandling_component" translatable="false">@null</string>
+
<!-- Minimum span needed to begin a touch scaling gesture.
If the span is equal to or greater than this size, a scaling gesture
will begin, where supported. (See android.view.ScaleGestureDetector)
-->
<bool name="config_enableWifiDisplay">false</bool>
- <!-- The color transform values that correspond to each respective configuration mode for the
- built-in display, or -1 if the mode is unsupported by the device. The possible
- configuration modes are:
- 1. Wide-gamut ("Vibrant")
- 2. Adobe RGB ("Natural")
- 3. sRGB ("Standard")
-
- For example, if a device had Wide-gamut as color transform mode 1, sRGB mode as color
- transform mode 7, and did not support Adobe RGB at all this would look like:
-
- <integer-array name="config_colorTransforms">
- <item>1</item>
- <item>-1</item>
- <item>7</item>
- </integer-array>
+ <!-- When true, local displays that do not contain any of their own content will automatically
+ mirror the content of the default display. -->
+ <bool name="config_localDisplaysMirrorContent">true</bool>
+
+ <!-- The default mode for the default display. One of the following values (See Display.java):
+ 0 - COLOR_MODE_DEFAULT
+ 7 - COLOR_MODE_SRGB
-->
- <integer-array name="config_colorTransforms">
- <item>-1</item>
- <item>-1</item>
- <item>-1</item>
- </integer-array>
+ <integer name="config_defaultDisplayDefaultColorMode">0</integer>
<!-- When true use the linux /dev/input/event subsystem to detect the switch changes
on the headphone/microphone jack. When false use the older uevent framework. -->
where if the preferred is used we don't try the others. -->
<bool name="config_dontPreferApn">false</bool>
- <!-- The list of ril radio technologies (see ServiceState.java) which only support
- a single data connection at one time. This may change by carrier via
- overlays (some don't support multiple pdp on UMTS). All unlisted radio
- tech types support unlimited types (practically only 2-4 used). -->
- <integer-array name="config_onlySingleDcAllowed">
- <item>4</item> <!-- IS95A -->
- <item>5</item> <!-- IS95B -->
- <item>6</item> <!-- 1xRTT -->
- <item>7</item> <!-- EVDO_0 -->
- <item>8</item> <!-- EVDO_A -->
- <item>12</item> <!-- EVDO_B -->
- </integer-array>
-
<!-- Set to true if after a provisioning apn the radio should be restarted -->
<bool name="config_restartRadioAfterProvisioning">false</bool>
<string-array name="config_disabledUntilUsedPreinstalledCarrierApps" translatable="false" />
<!-- The list of classes that should be added to the notification ranking pipline.
- See {@link com.android.server.notification.NotificationSignalExtractor} -->
+ See {@link com.android.server.notification.NotificationSignalExtractor}
+ If you add a new extractor to this list make sure to update
+ NotificationManagerService.handleRankingSort()-->
<string-array name="config_notificationSignalExtractors">
+ <!-- many of the following extractors depend on the notification channel, so this
+ extractor must come first -->
+ <item>com.android.server.notification.NotificationChannelExtractor</item>
+ <item>com.android.server.notification.NotificationAdjustmentExtractor</item>
+ <!-- depends on AdjustmentExtractor-->
<item>com.android.server.notification.ValidateNotificationPeople</item>
- <item>com.android.server.notification.PackagePriorityExtractor</item>
+ <item>com.android.server.notification.PriorityExtractor</item>
+ <item>com.android.server.notification.ImportanceExtractor</item>
+ <!-- depends on ImportanceExtractor-->
<item>com.android.server.notification.NotificationIntrusivenessExtractor</item>
- <item>com.android.server.notification.PackageVisibilityExtractor</item>
+ <item>com.android.server.notification.VisibilityExtractor</item>
+ <item>com.android.server.notification.BadgeExtractor</item>
</string-array>
<!-- Flag indicating that this device does not rotate and will always remain in its default
when alpha identifier is not provided by the UICC -->
<bool name="config_stkNoAlphaUsrCnf">true</bool>
- <!-- Don't use roaming icon for considered operators.
- A match on config_sameNamedOperatorConsideredRoaming supersedes a match on this.
- Can use mcc or mcc+mnc as item. For example, 302 or 21407.
- If operators, 21404 and 21407, make roaming agreements, user of 21404 should not see
- the roaming icon as using 21407 network.
- To do this, add 21407 item to values-mcc214-mnc04/config.xml -->
- <string-array translatable="false" name="config_operatorConsideredNonRoaming">
- </string-array>
-
<!-- Threshold (in ms) under which a screen off / screen on will be considered a reset of the
immersive mode confirmation prompt.-->
<integer name="config_immersive_mode_confirmation_panic">5000</integer>
<!-- For some operators, PDU has garbages. To fix it, need to use valid index -->
<integer name="config_valid_wappush_index">-1</integer>
- <!-- This is NOT just for same named operators unlike the name suggests (will blacklist regardless of name).
- A match on this supersedes a match on config_operatorConsideredNonRoaming.
- Uses "startsWith" so you can use a leading substring like the mcc or
- use the complete mcc+mnc string.
- For a given mcc/mcc-mnc, some operators may want to roam (even if
- config_operatorConsideredNonRoaming has the mcc/mcc-mnc).
- user of 40485 should see the roaming icon as using 40483 network
- though same Reliance network.
- To do this, add 40483 item to values-mcc404-mnc85/config.xml -->
- <string-array translatable="false" name="config_sameNamedOperatorConsideredRoaming">
- </string-array>
<!-- call barring MMI code from TS 22.030 Annex B -->
<string-array translatable="false" name="config_callBarringMMI">
<item>33</item>
"bugreport" = Take bug report, if available
"silent" = silent mode
"users" = list of users
+ "restart" = restart device
-->
<string-array translatable="false" name="config_globalActionsList">
<item>power</item>
+ <item>restart</item>
<item>bugreport</item>
<item>users</item>
</string-array>
-->
<string-array translatable="false" name="config_telephonyHardware">
<!-- modem -->
- <item>"0,modem,0,0,0,1,1,1"</item>
+ <item>0,modem,0,0,0,1,1,1</item>
<!-- sim -->
- <item>"1,sim,0,modem"</item>
+ <item>1,sim,0,modem</item>
</string-array>
<!-- This string array can be overriden to add an additional DRM support for WebView EME. -->
- <!-- Array of "[keySystemName],[UuidOfMediaDrm]" @hide @SystemApi -->
+ <!-- Array of "[keySystemName],[UuidOfMediaDrm]" -->
<string-array name="config_keySystemUuidMapping" translatable="false">
<!-- Example:
<item>"x-com.microsoft.playready,9A04F079-9840-4286-AB92-E65BE0885F95"</item>
IMS service implementation will do both.i.e.hold followed by merge. -->
<bool name="skipHoldBeforeMerge">true</bool>
- <!-- Flag indicating emergency calls will always use IMS irrespective of the state of
- the IMS connection -->
- <bool name="useImsAlwaysForEmergencyCall">true</bool>
-
<!-- Flag indicating whether the IMS service can be turned off. If false then
the service will not be turned-off completely (the ImsManager.turnOffIms() will
be disabled) but individual Features can be disabled using ImsConfig.setFeatureValue() -->
provisioning, availability etc -->
<bool name="config_carrier_volte_available">false</bool>
- <!-- Flag specifying whether VoLTE availability is based on provisioning -->
- <bool name="config_carrier_volte_provisioned">false</bool>
-
<!-- Flag specifying whether VoLTE TTY is supported -->
<bool name="config_carrier_volte_tty_supported">true</bool>
<!-- Flag specifying whether VT is available on device -->
<bool name="config_device_vt_available">false</bool>
+ <!-- Flag specifying whether the device will use the "allow_hold_in_ims_call" carrier config
+ option. When false, the device will support holding of IMS calls, regardless of the
+ carrier config setting. -->
+ <bool name="config_device_respects_hold_carrier_config">true</bool>
+
<!-- Flag specifying whether VT should be available for carrier: independent of
carrier provisioning. If false: hard disabled. If true: then depends on carrier
provisioning, availability etc -->
<bool name="config_carrier_vt_available">false</bool>
<!-- Flag specifying whether WFC over IMS is available on device -->
- <bool name="config_device_wfc_ims_available">false</bool>
+ <bool name="config_device_wfc_ims_available">false</bool>
<!-- Flag specifying whether WFC over IMS should be available for carrier: independent of
carrier provisioning. If false: hard disabled. If true: then depends on carrier
provisioning, availability etc -->
<bool name="config_carrier_wfc_ims_available">false</bool>
+ <!-- Whether to use voip audio mode for ims call -->
+ <bool name="config_use_voip_mode_for_ims">false</bool>
+
+ <!-- ImsService package name to bind to by default. If none is specified in an overlay, an
+ empty string is passed in -->
+ <string name="config_ims_package"/>
+
+ <!-- Flag specifying whether or not IMS will use the dynamic ImsResolver -->
+ <bool name="config_dynamic_bind_ims">false</bool>
+
<bool name="config_networkSamplingWakesDevice">true</bool>
<string-array translatable="false" name="config_cdma_home_system" />
string that's stored in 8-bit unpacked format) characters.-->
<bool translatable="false" name="config_sms_decode_gsm_8bit_data">false</bool>
- <!-- Package name providing WebView implementation. -->
- <string name="config_webViewPackageName" translatable="false">com.android.webview</string>
-
<!-- If EMS is not supported, framework breaks down EMS into single segment SMS
and adds page info " x/y". This config is used to set which carrier doesn't
support EMS and whether page info should be added at the beginning or the end.
<string-array translatable="false" name="config_gpsParameters">
<item>SUPL_HOST=supl.google.com</item>
<item>SUPL_PORT=7275</item>
- <item>NTP_SERVER=north-america.pool.ntp.org</item>
<item>SUPL_VER=0x20000</item>
<item>SUPL_MODE=1</item>
+ <item>SUPL_ES=1</item>
+ <item>LPP_PROFILE=0</item>
+ <item>USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1</item>
+ <item>A_GLONASS_POS_PROTOCOL_SELECT=0</item>
+ <item>GPS_LOCK=0</item>
</string-array>
+ <!-- Sprint need a 70 ms delay for 3way call -->
+ <integer name="config_cdma_3waycall_flash_delay">0</integer>
+
<!-- If there is no preload VM number in the sim card, carriers such as
Verizon require to load a default vm number from the configurantion.
Define config_default_vm_number for this purpose. And there are two
current sim's gid, the last one without gid will be picked -->
<string-array translatable="false" name="config_default_vm_number" />
- <!-- Sprint need a 70 ms delay for 3way call -->
- <integer name="config_cdma_3waycall_flash_delay">0</integer>
-
<!--SIM does not save, but the voice mail number to be changed. -->
<bool name="editable_voicemailnumber">false</bool>
<bool name="config_sms_force_7bit_encoding">false</bool>
- <!-- Flag indicating whether strict threshold is used, or lenient threshold is used,
- when evaluating RSRP for LTE antenna bar display
- 0. Strict threshold
- 1. Lenient threshold
- -->
- <integer name="config_LTE_RSRP_threshold_type">1</integer>
+ <!--Thresholds for LTE dbm in status bar-->
+ <integer-array translatable="false" name="config_lteDbmThresholds">
+ <item>-140</item> <!-- SIGNAL_STRENGTH_NONE_OR_UNKNOWN -->
+ <item>-128</item> <!-- SIGNAL_STRENGTH_POOR -->
+ <item>-118</item> <!-- SIGNAL_STRENGTH_MODERATE -->
+ <item>-108</item> <!-- SIGNAL_STRENGTH_GOOD -->
+ <item>-98</item> <!-- SIGNAL_STRENGTH_GREAT -->
+ <item>-44</item>
+ </integer-array>
<!-- Enabled built-in zen mode condition providers -->
<string-array translatable="false" name="config_system_condition_providers">
default scale-up transition. -->
<bool name="config_overrideRemoteViewsActivityTransition">false</bool>
- <!-- This config is used to check if the carrier requires converting destination
- number before sending out a SMS.
- Formats for this configuration as below:
- [true or false][;optional gid]
- The logic to pick up the configuration:
- (1) If the "config_sms_convert_destination_number_support" array has no gid
- special item, the last one will be picked
- (2) If the "config_sms_convert_destination_number_support" array has gid special
- item and it matches the current sim's gid, it will be picked.
- (3) If the "config_sms_convert_destination_number_support" array has gid special
- item but it doesn't match the current sim's gid, the last one without gid
- will be picked -->
- <string-array translatable="false" name="config_sms_convert_destination_number_support">
- <item>false</item>
- </string-array>
-
<!-- The maximum bitmap size that can be written to a MediaMetadata object. This value
is the max width/height allowed in dips.-->
<dimen name="config_mediaMetadataBitmapMaxSize">320dp</dimen>
<!-- An array of CDMA roaming indicators which means international roaming -->
<integer-array translatable="false" name="config_cdma_international_roaming_indicators" />
- <!-- set the system language as value of EF LI/EF PL -->
- <bool name="config_use_sim_language_file">true</bool>
+ <!-- flag to indicate if EF LI/EF PL should be used for system language -->
+ <bool name="config_use_sim_language_file">false</bool>
<!-- Use ERI text for network name on CDMA LTE -->
<bool name="config_LTE_eri_for_network_name">true</bool>
(range of 18 - 21 kHz). -->
<bool name="config_supportSpeakerNearUltrasound">true</bool>
+ <!-- Whether the Unprocessed audio source supports the required frequency range and level -->
+ <bool name="config_supportAudioSourceUnprocessed">false</bool>
+
<!-- Flag indicating device support for EAP SIM, AKA, AKA' -->
<bool name="config_eap_sim_based_auth_supported">true</bool>
-
+
<!-- How long history of previous vibrations should be kept for the dumpsys. -->
<integer name="config_previousVibrationsDumpLimit">20</integer>
+ <!-- The default vibration strength, must be between 1 and 255 inclusive. -->
+ <integer name="config_defaultVibrationAmplitude">255</integer>
+
+ <!-- If the device should still vibrate even in low power mode, for certain priority vibrations
+ (e.g. accessibility, alarms). This is mainly for Wear devices that don't have speakers. -->
+ <bool name="config_allowPriorityVibrationsInLowPowerMode">false</bool>
+
<!-- Number of retries Cell Data should attempt for a given error code before
restarting the modem.
Error codes not listed will not lead to modem restarts.
<!-- Set initial MaxRetry value for operators -->
<integer name="config_mdc_initial_max_retry">1</integer>
- <!-- The OEM specified sensor type for the gesture to launch the camear app. -->
+ <!-- The OEM specified sensor type for the gesture to launch the camera app. -->
<integer name="config_cameraLaunchGestureSensorType">-1</integer>
<!-- The OEM specified sensor string type for the gesture to launch camera app, this value
must match the value of config_cameraLaunchGestureSensorType in OEM's HAL -->
<!-- The BT name of the keyboard packaged with the device. If this is defined, SystemUI will
automatically try to pair with it when the device exits tablet mode. -->
<string translatable="false" name="config_packagedKeyboardName"></string>
+
+ <!-- The device supports freeform window management. Windows have title bars and can be moved
+ and resized. If you set this to true, you also need to add
+ PackageManager.FEATURE_FREEFORM_WINDOW_MANAGEMENT feature to your device specification.
+ The duplication is necessary, because this information is used before the features are
+ available to the system.-->
+ <bool name="config_freeformWindowManagement">false</bool>
+
+ <!-- If set, this will force all windows to draw the status bar background, including the apps
+ that have not requested doing so (via the WindowManager.FLAG_DRAWS_SYSTEM_BAR_BACKGROUNDS
+ flag). -->
+ <bool name="config_forceWindowDrawsStatusBarBackground">true</bool>
+
+ <!-- Controls the opacity of the navigation bar depending on the visibility of the
+ various workspace stacks.
+ 0 - Nav bar is always opaque when either the freeform stack or docked stack is visible.
+ 1 - Nav bar is always translucent when the freeform stack is visible, otherwise always
+ opaque.
+ -->
+ <integer name="config_navBarOpacityMode">0</integer>
+
+ <!-- Default insets [LEFT/RIGHTxTOP/BOTTOM] from the screen edge for picture-in-picture windows.
+ These values are in DPs and will be converted to pixel sizes internally. -->
+ <string translatable="false" name="config_defaultPictureInPictureScreenEdgeInsets">16x16</string>
+
+ <!-- The percentage of the screen width to use for the default width or height of
+ picture-in-picture windows. Regardless of the percent set here, calculated size will never
+ be smaller than @dimen/default_minimal_size_pip_resizable_task. -->
+ <item name="config_pictureInPictureDefaultSizePercent" format="float" type="dimen">0.23</item>
+
+ <!-- The default aspect ratio for picture-in-picture windows. -->
+ <item name="config_pictureInPictureDefaultAspectRatio" format="float" type="dimen">1.777778</item>
+
+ <!-- This is the limit for the max and min aspect ratio (1 / this value) at which the min size
+ will be used instead of an adaptive size based loosely on area. -->
+ <item name="config_pictureInPictureAspectRatioLimitForMinSize" format="float" type="dimen">1.777778</item>
+
+ <!-- The default gravity for the picture-in-picture window.
+ Currently, this maps to Gravity.BOTTOM | Gravity.RIGHT -->
+ <integer name="config_defaultPictureInPictureGravity">0x55</integer>
+
+ <!-- The minimum aspect ratio (width/height) that is supported for picture-in-picture. Any
+ ratio smaller than this is considered too tall and thin to be usable. Currently, this
+ is the inverse of the max landscape aspect ratio (1:2.39), but this is an extremely
+ skinny aspect ratio that is not expected to be widely used. -->
+ <item name="config_pictureInPictureMinAspectRatio" format="float" type="dimen">0.41841004184</item>
+
+ <!-- The minimum aspect ratio (width/height) that is supported for picture-in-picture. Any
+ ratio larger than this is considered to wide and short to be usable. Currently 2.39:1. -->
+ <item name="config_pictureInPictureMaxAspectRatio" format="float" type="dimen">2.39</item>
+
+ <!-- The snap mode to use for picture-in-picture. These values correspond to constants defined
+ in PipSnapAlgorithm and should not be changed independently.
+ 0 - Snap to the four corners
+ 1 - Snap to the four corners and the mid-points on the long edge in each orientation
+ 2 - Snap anywhere along the edge of the screen
+ 3 - Snap anywhere along the edge of the screen and magnet to corners
+ 4 - Snap to the long edges in each orientation and magnet to corners
+ -->
+ <integer name="config_pictureInPictureSnapMode">4</integer>
+
+ <!-- Controls the snap mode for the docked stack divider
+ 0 - 3 snap targets: left/top has 16:9 ratio, 1:1, and right/bottom has 16:9 ratio
+ 1 - 3 snap targets: fixed ratio, 1:1, (1 - fixed ratio)
+ 2 - 1 snap target: 1:1
+ -->
+ <integer name="config_dockedStackDividerSnapMode">0</integer>
+
+ <!-- List of comma separated package names for which we the system will not show crash, ANR,
+ etc. dialogs. -->
+ <string translatable="false" name="config_appsNotReportingCrashes"></string>
+
+ <!-- Inactivity threshold (in milliseconds) used in JobScheduler. JobScheduler will consider
+ the device to be "idle" after being inactive for this long. -->
+ <integer name="config_jobSchedulerInactivityIdleThreshold">4260000</integer>
+ <!-- The alarm window (in milliseconds) that JobScheduler uses to enter the idle state -->
+ <integer name="config_jobSchedulerIdleWindowSlop">300000</integer>
+
+ <!-- If true, all guest users created on the device will be ephemeral. -->
+ <bool name="config_guestUserEphemeral">false</bool>
+
+ <!-- Enforce strong auth on boot. Setting this to false represents a security risk and should
+ not be ordinarily done. The only case in which this might be permissible is in a car head
+ unit where there are hardware mechanisms to protect the device (physical keys) and not
+ much in the way of user data.
+ -->
+ <bool name="config_strongAuthRequiredOnBoot">true</bool>
+
+ <!-- Wallpaper cropper package. Used as the default cropper if the active launcher doesn't
+ handle wallpaper cropping.
+ -->
+ <string name="config_wallpaperCropperPackage" translatable="false">com.android.wallpapercropper</string>
+
+ <!-- True if the device supports at least one form of multi-window.
+ E.g. freeform, split-screen, picture-in-picture. -->
+ <bool name="config_supportsMultiWindow">true</bool>
+
+ <!-- True if the device supports split screen as a form of multi-window. -->
+ <bool name="config_supportsSplitScreenMultiWindow">true</bool>
+
+ <!-- True if the device supports running activities on secondary displays. -->
+ <bool name="config_supportsMultiDisplay">true</bool>
+
+ <!-- True if the device has no home screen. That is a launcher activity
+ where the user can launch other applications from. -->
+ <bool name="config_noHomeScreen">false</bool>
+
+ <!-- True if the device requires AppWidgetService even if it does not have
+ the PackageManager.FEATURE_APP_WIDGETS feature -->
+ <bool name="config_enableAppWidgetService">false</bool>
+
+ <!-- True if the device supports Sustained Performance Mode-->
+ <bool name="config_sustainedPerformanceModeSupported">false</bool>
+
+ <!-- File used to enable the double touch gesture.
+ TODO: move to input HAL once ready. -->
+ <string name="config_doubleTouchGestureEnableFile"></string>
+
+ <!-- Controls how we deal with externally connected physical keyboards.
+ 0 - When using this device, it is not clear for users to recognize when the physical
+ keyboard is (should be) connected and when it is (should be) disconnected. Most of
+ phones and tablets with Bluetooth keyboard would fall into this category because the
+ connected Bluetooth keyboard may or may not be nearby the host device.
+ 1 - When using this device, it is clear for users to recognize when the physical
+ keyboard is (should be) connected and when it is (should be) disconnected.
+ Devices with wired USB keyboard is one clear example. Some 2-in-1 convertible
+ tablets with dedicated keyboards may have the same affordance to wired USB keyboard.
+ -->
+ <integer name="config_externalHardKeyboardBehavior">0</integer>
+
+ <!-- Package of the unbundled tv remote service which can connect to tv
+ remote provider -->
+ <string name="config_tvRemoteServicePackage" translatable="false"></string>
+
+ <!-- True if the device supports persisting security logs across reboots.
+ This requires the device's kernel to have pstore and pmsg enabled,
+ and DRAM to be powered and refreshed through all stages of reboot. -->
+ <bool name="config_supportPreRebootSecurityLogs">false</bool>
+
+ <!-- Default files to pin via Pinner Service -->
+ <string-array translatable="false" name="config_defaultPinnerServiceFiles">
+ </string-array>
+
+ <!-- True if camera app should be pinned via Pinner Service -->
+ <bool name="config_pinnerCameraApp">false</bool>
+
+ <!-- Number of days preloaded file cache should be preserved on a device before it can be
+ deleted -->
+ <integer name="config_keepPreloadsMinDays">7</integer>
+
+ <!-- Flag indicating whether round icons should be parsed from the application manifest. -->
+ <bool name="config_useRoundIcon">false</bool>
+
+ <!-- Flag indicating whether the assist disclosure can be disabled using
+ ASSIST_DISCLOSURE_ENABLED. -->
+ <bool name="config_allowDisablingAssistDisclosure">false</bool>
+
+ <!-- True if the device supports system navigation keys. -->
+ <bool name="config_supportSystemNavigationKeys">false</bool>
+
+ <!-- emergency call number for the emergency affordance -->
+ <string name="config_emergency_call_number" translatable="false">112</string>
+
+ <!-- Do not translate. Mcc codes whose existence trigger the presence of emergency
+ affordances-->
+ <integer-array name="config_emergency_mcc_codes" translatable="false">
+ <item>404</item>
+ <item>405</item>
+ </integer-array>
+
+ <!-- Package name for the device provisioning package. -->
+ <string name="config_deviceProvisioningPackage"></string>
+
+ <!-- Colon separated list of package names that should be granted DND access -->
+ <string name="config_defaultDndAccessPackages" translatable="false">com.android.camera2</string>
+
+ <!-- User restrictions set when the first user is created.
+ Note: Also update appropriate overlay files. -->
+ <string-array translatable="false" name="config_defaultFirstUserRestrictions">
+ </string-array>
+
+ <!-- Specifies whether the permissions needed by a legacy app should be
+ reviewed before any of its components can run. A legacy app is one
+ with targetSdkVersion < 23, i.e apps using the old permission model.
+ If review is not required, permissions are reviewed before the app
+ is installed. -->
+ <bool name="config_permissionReviewRequired">false</bool>
+
+ <!-- Default value for android:focusableInTouchMode for some framework scrolling containers.
+ ListView/GridView are notably absent since this is their default anyway.
+ Set to true for watch devices. -->
+ <bool name="config_focusScrollContainersInTouchMode">false</bool>
+
+ <string name="config_networkOverLimitComponent" translatable="false">com.android.systemui/com.android.systemui.net.NetworkOverLimitActivity</string>
+ <string name="config_dataUsageSummaryComponent" translatable="false">com.android.settings/com.android.settings.Settings$DataUsageSummaryActivity</string>
+
+ <!-- Flag specifying whether user-switch operations have custom UI. When false, user-switch
+ UI is handled by ActivityManagerService -->
+ <bool name="config_customUserSwitchUi">false</bool>
+
+ <!-- A array of regex to treat a SMS as VVM SMS if the message body matches.
+ Each item represents an entry, which consists of two parts:
+ a comma (,) separated list of MCCMNC the regex applies to, followed by a semicolon (;), and
+ then the regex itself. -->
+ <string-array translatable="false" name="config_vvmSmsFilterRegexes">
+ <!-- Verizon requires any SMS that starts with //VZWVVM to be treated as a VVM SMS-->
+ <item>310004,310010,310012,310013,310590,310890,310910,311110,311270,311271,311272,311273,311274,311275,311276,311277,311278,311279,311280,311281,311282,311283,311284,311285,311286,311287,311288,311289,311390,311480,311481,311482,311483,311484,311485,311486,311487,311488,311489;^//VZWVVM.*</item>
+ </string-array>
+
+ <!-- This config is holding calling number conversion map - expected to convert to emergency
+ number. Formats for this config as below:
+ <item>[dialstring1],[dialstring2],[dialstring3]:[replacement]</item>
+
+ E.g. for Taiwan Type Approval, 110 and 119 should be converted to 112.
+ <item>110,119:112</item>
+ -->
+ <string-array translatable="false" name="config_convert_to_emergency_number_map" />
+
+ <!-- An array of packages for which notifications cannot be blocked. -->
+ <string-array translatable="false" name="config_nonBlockableNotificationPackages" />
+
+ <!-- The default value for transition animation scale found in developer settings.
+ 1.0 corresponds to 1x animator scale, 0 means that there will be no transition
+ animations. Note that this is only a default and will be overridden by a
+ user-set value if toggled by settings so the "Transition animation scale" setting
+ should also be hidden if intended to be permanent. -->
+ <item name="config_appTransitionAnimationDurationScaleDefault" format="float" type="dimen">1.0</item>
+
+ <!-- Flag indicates that whether non-system apps can be installed on internal storage. -->
+ <bool name="config_allow3rdPartyAppOnInternal">true</bool>
+
+ <!-- Package name of the default cell broadcast receiver -->
+ <string name="config_defaultCellBroadcastReceiverPkg" translatable="false">com.android.cellbroadcastreceiver</string>
+
+ <!-- Specifies the path that is used by AdaptiveIconDrawable class to crop launcher icons. -->
+ <string name="config_icon_mask" translatable="false">"M50,0L92,0C96.42,0 100,4.58 100 8L100,92C100, 96.42 96.42 100 92 100L8 100C4.58, 100 0 96.42 0 92L0 8 C 0 4.42 4.42 0 8 0L50 0Z"</string>
+
+ <!-- The component name, flattened to a string, for the default accessibility service to be
+ enabled by the accessibility shortcut. This service must be trusted, as it can be activated
+ without explicit consent of the user. If no accessibility service with the specified name
+ exists on the device, the accessibility shortcut will be disabled by default. -->
+ <string name="config_defaultAccessibilityService" translatable="false"></string>
+
+ <!-- Flag indicates that whether escrow token API is enabled for TrustAgent -->
+ <!-- Warning: This API can be dangerous when not implemented properly. In particular,
+ escrow token must NOT be retrievable from device storage. In other words, either
+ escrow token is not stored on device or its ciphertext is stored on device while
+ the decryption key is not. Before enabling this feature, please ensure you've read
+ and followed the pertinent sections of the escrow tokens section of the CDD <link>-->
+ <!-- TODO(b/35230407) complete the link field -->
+ <bool name="config_allowEscrowTokenForTrustAgent">false</bool>
+
+ <!-- A flattened ComponentName which corresponds to the only trust agent that should be enabled
+ by default. If the default value is used, or set to an empty string, the restriction will
+ not be applied. -->
+ <string name="config_defaultTrustAgent" translatable="false"></string>
+
+ <!-- Colon separated list of package names that should be granted Notification Listener access -->
+ <string name="config_defaultListenerAccessPackages" translatable="false"></string>
+
+ <!-- Maximum size, specified in pixels, to restrain the display space width to. Height and
+ density will be scaled accordingly to maintain aspect ratio. A value of 0 indicates no
+ constraint will be enforced. -->
+ <integer name="config_maxUiWidth">0</integer>
+
+ <!-- Whether the device supports quick settings and its associated APIs -->
+ <bool name="config_quickSettingsSupported">true</bool>
+
+ <!-- The component name, flattened to a string, for the default autofill service
+ to enabled for an user. This service must be trusted, as it can be activated
+ without explicit consent of the user. If no autofill service with the
+ specified name exists on the device, autofill will be disabled by default.
+ -->
+ <string name="config_defaultAutofillService" translatable="false"></string>
+
+ <!-- Whether the device uses the default focus highlight when focus state isn't specified. -->
+ <bool name="config_useDefaultFocusHighlight">true</bool>
+
+ <!-- Flag indicating that the entire notification header can be clicked to expand the
+ notification. If false, then the expand icon has to be clicked in order for the expand
+ to occur. The expand button will have increased touch boundaries to accomodate this. -->
+ <bool name="config_notificationHeaderClickableForExpand">false</bool>
+
+ <!-- Configuration for automotive -->
+ <bool name="enable_pbap_pce_profile">false</bool>
+
+ <!-- Default data warning level in mb -->
+ <integer name="default_data_warning_level_mb">2048</integer>
+
+ <!-- When true, indicates that the vendor's IMS implementation requires a workaround when
+ sending a request to enable or disable the camera while the video session is also
+ paused. -->
+ <bool name="config_useVideoPauseWorkaround">false</bool>
+
+ <!-- Whether to send a custom package name with the PSD.-->
+ <bool name="config_sendPackageName">false</bool>
+
+ <!-- Name for the set of keys associating package names -->
+ <string name="config_helpPackageNameKey" translatable="false"></string>
+
+ <!-- Name for the set of values of package names -->
+ <string name="config_helpPackageNameValue" translatable="false"></string>
+
+ <!-- Intent key for the package name keys -->
+ <string name="config_helpIntentExtraKey" translatable="false"></string>
+
+ <!-- Intent key for package name values -->
+ <string name="config_helpIntentNameKey" translatable="false"></string>
+
+ <!-- Intent key for the package name keys -->
+ <string name="config_feedbackIntentExtraKey" translatable="false"></string>
+
+ <!-- Intent key for package name values -->
+ <string name="config_feedbackIntentNameKey" translatable="false"></string>
+
+ <!-- The apps that need to be hidden when they are disabled -->
+ <string-array name="config_hideWhenDisabled_packageNames"></string-array>
+
+ <!-- Additional non-platform defined global settings exposed to Instant Apps -->
+ <string-array name="config_allowedGlobalInstantAppSettings"></string-array>
+
+ <!-- Additional non-platform defined system settings exposed to Instant Apps -->
+ <string-array name="config_allowedSystemInstantAppSettings"></string-array>
+
+ <!-- Additional non-platform defined secure settings exposed to Instant Apps -->
+ <string-array name="config_allowedSecureInstantAppSettings"></string-array>
+
+ <!-- Handle volume keys directly in Window Manager without passing them to the foreground app -->
+ <bool name="config_handleVolumeKeysInWindowManager">false</bool>
+
+ <!-- Volume level of in-call notification tone playback [0..1] -->
+ <item name="config_inCallNotificationVolume" format="float" type="dimen">.10</item>
+
+ <!-- URI for in call notification sound -->
+ <string translatable="false" name="config_inCallNotificationSound">/system/media/audio/ui/InCallNotification.ogg</string>
+
+ <!-- The OEM specified sensor type for the lift trigger to launch the camera app. -->
+ <integer name="config_cameraLiftTriggerSensorType">-1</integer>
+ <!-- The OEM specified sensor string type for the gesture to launch camera app, this value
+ must match the value of config_cameraLiftTriggerSensorType in OEM's HAL -->
+ <string translatable="false" name="config_cameraLiftTriggerSensorStringType"></string>
+
+ <!-- Default number of days to retain for the automatic storage manager. -->
+ <integer translatable="false" name="config_storageManagerDaystoRetainDefault">90</integer>
+
+ <!-- Name of a font family to use for headlines. If empty, falls back to platform default -->
+ <string name="config_headlineFontFamily" translatable="false"></string>
+ <!-- Name of a font family to use for headlines. Defaults to sans-serif-light -->
+ <string name="config_headlineFontFamilyLight" translatable="false">sans-serif-light</string>
+ <!-- Allows setting custom fontFeatureSettings on specific text. -->
+ <string name="config_headlineFontFeatureSettings" translatable="false"></string>
+
+ <!-- An array of packages that need to be treated as type system in battery settings -->
+ <string-array translatable="false" name="config_batteryPackageTypeSystem">
+ <item>com.android.providers.calendar</item>
+ <item>com.android.providers.media</item>
+ <item>com.android.systemui</item>
+ </string-array>
+
+ <!-- An array of packages that need to be treated as type service in battery settings -->
+ <string-array translatable="false" name="config_batteryPackageTypeService"/>
+
+ <!-- Flag indicating whether or not to enable night mode detection. -->
+ <bool name="config_enableNightMode">false</bool>
+
+ <!-- Flag indicating that the actions buttons for a notification should be tinted with by the
+ color supplied by the Notification.Builder if present. -->
+ <bool name="config_tintNotificationActionButtons">true</bool>
+
+ <!-- Show area update info settings in CellBroadcastReceiver and information in SIM status in Settings app -->
+ <bool name="config_showAreaUpdateInfoSettings">false</bool>
+
+ <!-- Enable the RingtonePickerActivity in 'com.android.providers.media'. -->
+ <bool name="config_defaultRingtonePickerEnabled">true</bool>
+
+ <!-- Allow SystemUI to show the shutdown dialog -->
+ <bool name="config_showSysuiShutdown">true</bool>
+
+ <!-- The stable device width and height in pixels. If these aren't set to a positive number
+ then the device will use the width and height of the default display the first time it's
+ booted. -->
+ <integer name="config_stableDeviceDisplayWidth">-1</integer>
+ <integer name="config_stableDeviceDisplayHeight">-1</integer>
</resources>
OSDN Git Service
