};
static struct bond_opt_value bond_arp_validate_tbl[] = {
- { "none", BOND_ARP_VALIDATE_NONE, BOND_VALFLAG_DEFAULT},
- { "active", BOND_ARP_VALIDATE_ACTIVE, 0},
- { "backup", BOND_ARP_VALIDATE_BACKUP, 0},
- { "all", BOND_ARP_VALIDATE_ALL, 0},
- { NULL, -1, 0},
+ { "none", BOND_ARP_VALIDATE_NONE, BOND_VALFLAG_DEFAULT},
+ { "active", BOND_ARP_VALIDATE_ACTIVE, 0},
+ { "backup", BOND_ARP_VALIDATE_BACKUP, 0},
+ { "all", BOND_ARP_VALIDATE_ALL, 0},
+ { "filter", BOND_ARP_FILTER, 0},
+ { "filter_active", BOND_ARP_FILTER_ACTIVE, 0},
+ { "filter_backup", BOND_ARP_FILTER_BACKUP, 0},
+ { NULL, -1, 0},
};
static struct bond_opt_value bond_arp_all_targets_tbl[] = {
.id = BOND_OPT_ARP_VALIDATE,
.name = "arp_validate",
.desc = "validate src/dst of ARP probes",
- .unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_ACTIVEBACKUP)),
+ .unsuppmodes = BIT(BOND_MODE_8023AD) | BIT(BOND_MODE_TLB) |
+ BIT(BOND_MODE_ALB),
.values = bond_arp_validate_tbl,
.set = bond_option_arp_validate_set
},
p = strchr(val->string, '\n');
if (p)
*p = '\0';
- pr_err("%s: option %s: invalid value (%s).\n",
+ pr_err("%s: option %s: invalid value (%s)\n",
bond->dev->name, opt->name, val->string);
} else {
- pr_err("%s: option %s: invalid value (%llu).\n",
+ pr_err("%s: option %s: invalid value (%llu)\n",
bond->dev->name, opt->name, val->value);
}
}
maxval = bond_opt_get_flags(opt, BOND_VALFLAG_MAX);
if (!maxval)
break;
- pr_err("%s: option %s: allowed values %llu - %llu.\n",
+ pr_err("%s: option %s: allowed values %llu - %llu\n",
bond->dev->name, opt->name, minval ? minval->value : 0,
maxval->value);
break;
bond_opt_dep_print(bond, opt);
break;
case -ENOTEMPTY:
- pr_err("%s: option %s: unable to set because the bond device has slaves.\n",
+ pr_err("%s: option %s: unable to set because the bond device has slaves\n",
bond->dev->name, opt->name);
break;
case -EBUSY:
- pr_err("%s: option %s: unable to set because the bond device is up.\n",
+ pr_err("%s: option %s: unable to set because the bond device is up\n",
bond->dev->name, opt->name);
break;
default:
bond->params.arp_interval = 0;
/* set miimon to default value */
bond->params.miimon = BOND_DEFAULT_MIIMON;
- pr_info("%s: Setting MII monitoring interval to %d.\n",
+ pr_info("%s: Setting MII monitoring interval to %d\n",
bond->dev->name, bond->params.miimon);
}
if (slave_dev) {
if (!netif_is_bond_slave(slave_dev)) {
- pr_err("Device %s is not bonding slave.\n",
+ pr_err("Device %s is not bonding slave\n",
slave_dev->name);
return -EINVAL;
}
if (bond->dev != netdev_master_upper_dev_get(slave_dev)) {
- pr_err("%s: Device %s is not our slave.\n",
+ pr_err("%s: Device %s is not our slave\n",
bond->dev->name, slave_dev->name);
return -EINVAL;
}
/* check to see if we are clearing active */
if (!slave_dev) {
- pr_info("%s: Clearing current active slave.\n",
- bond->dev->name);
+ pr_info("%s: Clearing current active slave\n", bond->dev->name);
rcu_assign_pointer(bond->curr_active_slave, NULL);
bond_select_active_slave(bond);
} else {
if (new_active == old_active) {
/* do nothing */
- pr_info("%s: %s is already the current active slave.\n",
+ pr_info("%s: %s is already the current active slave\n",
bond->dev->name, new_active->dev->name);
} else {
if (old_active && (new_active->link == BOND_LINK_UP) &&
IS_UP(new_active->dev)) {
- pr_info("%s: Setting %s as active slave.\n",
+ pr_info("%s: Setting %s as active slave\n",
bond->dev->name, new_active->dev->name);
bond_change_active_slave(bond, new_active);
} else {
- pr_err("%s: Could not set %s as active slave; either %s is down or the link is down.\n",
+ pr_err("%s: Could not set %s as active slave; either %s is down or the link is down\n",
bond->dev->name, new_active->dev->name,
new_active->dev->name);
ret = -EINVAL;
int bond_option_miimon_set(struct bonding *bond, struct bond_opt_value *newval)
{
- pr_info("%s: Setting MII monitoring interval to %llu.\n",
+ pr_info("%s: Setting MII monitoring interval to %llu\n",
bond->dev->name, newval->value);
bond->params.miimon = newval->value;
if (bond->params.updelay)
- pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+ pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value\n",
bond->dev->name,
bond->params.updelay * bond->params.miimon);
if (bond->params.downdelay)
- pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+ pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value\n",
bond->dev->name,
bond->params.downdelay * bond->params.miimon);
if (newval->value && bond->params.arp_interval) {
- pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+ pr_info("%s: MII monitoring cannot be used with ARP monitoring - disabling ARP monitoring...\n",
bond->dev->name);
bond->params.arp_interval = 0;
if (bond->params.arp_validate)
bond->params.miimon);
}
bond->params.updelay = value / bond->params.miimon;
- pr_info("%s: Setting up delay to %d.\n",
- bond->dev->name,
- bond->params.updelay * bond->params.miimon);
+ pr_info("%s: Setting up delay to %d\n",
+ bond->dev->name, bond->params.updelay * bond->params.miimon);
return 0;
}
bond->params.miimon);
}
bond->params.downdelay = value / bond->params.miimon;
- pr_info("%s: Setting down delay to %d.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
+ pr_info("%s: Setting down delay to %d\n",
+ bond->dev->name, bond->params.downdelay * bond->params.miimon);
return 0;
}
int bond_option_use_carrier_set(struct bonding *bond,
struct bond_opt_value *newval)
{
- pr_info("%s: Setting use_carrier to %llu.\n",
+ pr_info("%s: Setting use_carrier to %llu\n",
bond->dev->name, newval->value);
bond->params.use_carrier = newval->value;
int bond_option_arp_interval_set(struct bonding *bond,
struct bond_opt_value *newval)
{
- pr_info("%s: Setting ARP monitoring interval to %llu.\n",
+ pr_info("%s: Setting ARP monitoring interval to %llu\n",
bond->dev->name, newval->value);
bond->params.arp_interval = newval->value;
if (newval->value) {
if (bond->params.miimon) {
- pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+ pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring\n",
bond->dev->name, bond->dev->name);
bond->params.miimon = 0;
}
if (!bond->params.arp_targets[0])
- pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+ pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified\n",
bond->dev->name);
}
if (bond->dev->flags & IFF_UP) {
cancel_delayed_work_sync(&bond->arp_work);
} else {
/* arp_validate can be set only in active-backup mode */
- if (bond->params.arp_validate)
- bond->recv_probe = bond_arp_rcv;
+ bond->recv_probe = bond_arp_rcv;
cancel_delayed_work_sync(&bond->mii_work);
queue_delayed_work(bond->wq, &bond->arp_work, 0);
}
ind = bond_get_targets_ip(targets, 0); /* first free slot */
if (ind == -1) {
- pr_err("%s: ARP target table is full!\n",
- bond->dev->name);
+ pr_err("%s: ARP target table is full!\n", bond->dev->name);
return -EINVAL;
}
- pr_info("%s: adding ARP target %pI4.\n", bond->dev->name, &target);
+ pr_info("%s: Adding ARP target %pI4\n", bond->dev->name, &target);
_bond_options_arp_ip_target_set(bond, ind, target, jiffies);
ind = bond_get_targets_ip(targets, target);
if (ind == -1) {
- pr_err("%s: unable to remove nonexistent ARP target %pI4.\n",
+ pr_err("%s: unable to remove nonexistent ARP target %pI4\n",
bond->dev->name, &target);
return -EINVAL;
}
if (ind == 0 && !targets[1] && bond->params.arp_interval)
- pr_warn("%s: removing last arp target with arp_interval on\n",
+ pr_warn("%s: Removing last arp target with arp_interval on\n",
bond->dev->name);
- pr_info("%s: removing ARP target %pI4.\n", bond->dev->name,
- &target);
+ pr_info("%s: Removing ARP target %pI4\n", bond->dev->name, &target);
/* not to race with bond_arp_rcv */
write_lock_bh(&bond->lock);
else if (newval->string[0] == '-')
ret = bond_option_arp_ip_target_rem(bond, target);
else
- pr_err("no command found in arp_ip_targets file for bond %s. Use +<addr> or -<addr>.\n",
+ pr_err("no command found in arp_ip_targets file for bond %s - use +<addr> or -<addr>\n",
bond->dev->name);
} else {
target = newval->value;
int bond_option_arp_validate_set(struct bonding *bond,
struct bond_opt_value *newval)
{
- pr_info("%s: setting arp_validate to %s (%llu).\n",
+ pr_info("%s: Setting arp_validate to %s (%llu)\n",
bond->dev->name, newval->string, newval->value);
if (bond->dev->flags & IFF_UP) {
int bond_option_arp_all_targets_set(struct bonding *bond,
struct bond_opt_value *newval)
{
- pr_info("%s: setting arp_all_targets to %s (%llu).\n",
+ pr_info("%s: Setting arp_all_targets to %s (%llu)\n",
bond->dev->name, newval->string, newval->value);
bond->params.arp_all_targets = newval->value;
*p = '\0';
/* check to see if we are clearing primary */
if (!strlen(primary)) {
- pr_info("%s: Setting primary slave to None.\n",
- bond->dev->name);
+ pr_info("%s: Setting primary slave to None\n", bond->dev->name);
bond->primary_slave = NULL;
memset(bond->params.primary, 0, sizeof(bond->params.primary));
bond_select_active_slave(bond);
bond_for_each_slave(bond, slave, iter) {
if (strncmp(slave->dev->name, primary, IFNAMSIZ) == 0) {
- pr_info("%s: Setting %s as primary slave.\n",
+ pr_info("%s: Setting %s as primary slave\n",
bond->dev->name, slave->dev->name);
bond->primary_slave = slave;
strcpy(bond->params.primary, slave->dev->name);
}
if (bond->primary_slave) {
- pr_info("%s: Setting primary slave to None.\n",
- bond->dev->name);
+ pr_info("%s: Setting primary slave to None\n", bond->dev->name);
bond->primary_slave = NULL;
bond_select_active_slave(bond);
}
strncpy(bond->params.primary, primary, IFNAMSIZ);
bond->params.primary[IFNAMSIZ - 1] = 0;
- pr_info("%s: Recording %s as primary, but it has not been enslaved to %s yet.\n",
+ pr_info("%s: Recording %s as primary, but it has not been enslaved to %s yet\n",
bond->dev->name, primary, bond->dev->name);
out:
int bond_option_primary_reselect_set(struct bonding *bond,
struct bond_opt_value *newval)
{
- pr_info("%s: setting primary_reselect to %s (%llu).\n",
+ pr_info("%s: Setting primary_reselect to %s (%llu)\n",
bond->dev->name, newval->string, newval->value);
bond->params.primary_reselect = newval->value;
int bond_option_fail_over_mac_set(struct bonding *bond,
struct bond_opt_value *newval)
{
- pr_info("%s: Setting fail_over_mac to %s (%llu).\n",
+ pr_info("%s: Setting fail_over_mac to %s (%llu)\n",
bond->dev->name, newval->string, newval->value);
bond->params.fail_over_mac = newval->value;
int bond_option_xmit_hash_policy_set(struct bonding *bond,
struct bond_opt_value *newval)
{
- pr_info("%s: setting xmit hash policy to %s (%llu).\n",
+ pr_info("%s: Setting xmit hash policy to %s (%llu)\n",
bond->dev->name, newval->string, newval->value);
bond->params.xmit_policy = newval->value;
int bond_option_resend_igmp_set(struct bonding *bond,
struct bond_opt_value *newval)
{
- pr_info("%s: Setting resend_igmp to %llu.\n",
+ pr_info("%s: Setting resend_igmp to %llu\n",
bond->dev->name, newval->value);
bond->params.resend_igmp = newval->value;
int bond_option_lacp_rate_set(struct bonding *bond,
struct bond_opt_value *newval)
{
- pr_info("%s: Setting LACP rate to %s (%llu).\n",
+ pr_info("%s: Setting LACP rate to %s (%llu)\n",
bond->dev->name, newval->string, newval->value);
bond->params.lacp_fast = newval->value;
bond_3ad_update_lacp_rate(bond);
int bond_option_ad_select_set(struct bonding *bond,
struct bond_opt_value *newval)
{
- pr_info("%s: Setting ad_select to %s (%llu).\n",
+ pr_info("%s: Setting ad_select to %s (%llu)\n",
bond->dev->name, newval->string, newval->value);
bond->params.ad_select = newval->value;
goto err_no_cmd;
/* Check buffer length, valid ifname and queue id */
- if (strlen(newval->string) > IFNAMSIZ ||
- !dev_valid_name(newval->string) ||
+ if (!dev_valid_name(newval->string) ||
qid > bond->dev->real_num_tx_queues)
goto err_no_cmd;
return ret;
err_no_cmd:
- pr_info("invalid input for queue_id set for %s.\n",
- bond->dev->name);
+ pr_info("invalid input for queue_id set for %s\n", bond->dev->name);
ret = -EPERM;
goto out;
dev = __dev_get_by_name(dev_net(bond->dev), ifname);
if (!dev) {
- pr_info("%s: Interface %s does not exist!\n",
+ pr_info("%s: interface %s does not exist!\n",
bond->dev->name, ifname);
ret = -ENODEV;
goto out;
switch (command[0]) {
case '+':
- pr_info("%s: Adding slave %s.\n", bond->dev->name, dev->name);
+ pr_info("%s: Adding slave %s\n", bond->dev->name, dev->name);
ret = bond_enslave(bond->dev, dev);
break;
case '-':
- pr_info("%s: Removing slave %s.\n", bond->dev->name, dev->name);
+ pr_info("%s: Removing slave %s\n", bond->dev->name, dev->name);
ret = bond_release(bond->dev, dev);
break;
return ret;
err_no_cmd:
- pr_err("no command found in slaves file for bond %s. Use +ifname or -ifname.\n",
+ pr_err("no command found in slaves file for bond %s - use +ifname or -ifname\n",
bond->dev->name);
ret = -EPERM;
goto out;