static struct phy_driver realtek_drvs[] = {
{
- .phy_id = 0x00008201,
+ PHY_ID_MATCH_EXACT(0x00008201),
.name = "RTL8201CP Ethernet",
- .phy_id_mask = 0x0000ffff,
.features = PHY_BASIC_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
}, {
- .phy_id = 0x001cc816,
+ PHY_ID_MATCH_EXACT(0x001cc816),
.name = "RTL8201F Fast Ethernet",
- .phy_id_mask = 0x001fffff,
.features = PHY_BASIC_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
.ack_interrupt = &rtl8201_ack_interrupt,
.config_intr = &rtl8201_config_intr,
.suspend = genphy_suspend,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
- .phy_id = 0x001cc910,
+ PHY_ID_MATCH_EXACT(0x001cc910),
.name = "RTL8211 Gigabit Ethernet",
- .phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
.config_aneg = rtl8211_config_aneg,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
}, {
- .phy_id = 0x001cc912,
+ PHY_ID_MATCH_EXACT(0x001cc912),
.name = "RTL8211B Gigabit Ethernet",
- .phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
.ack_interrupt = &rtl821x_ack_interrupt,
.config_intr = &rtl8211b_config_intr,
.read_mmd = &genphy_read_mmd_unsupported,
.suspend = rtl8211b_suspend,
.resume = rtl8211b_resume,
}, {
- .phy_id = 0x001cc913,
+ PHY_ID_MATCH_EXACT(0x001cc913),
.name = "RTL8211C Gigabit Ethernet",
- .phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
.config_init = rtl8211c_config_init,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
}, {
- .phy_id = 0x001cc914,
+ PHY_ID_MATCH_EXACT(0x001cc914),
.name = "RTL8211DN Gigabit Ethernet",
- .phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
.ack_interrupt = rtl821x_ack_interrupt,
.config_intr = rtl8211e_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = 0x001cc915,
+ PHY_ID_MATCH_EXACT(0x001cc915),
.name = "RTL8211E Gigabit Ethernet",
- .phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
.ack_interrupt = &rtl821x_ack_interrupt,
.config_intr = &rtl8211e_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
- .phy_id = 0x001cc916,
+ PHY_ID_MATCH_EXACT(0x001cc916),
.name = "RTL8211F Gigabit Ethernet",
- .phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
.config_init = &rtl8211f_config_init,
.ack_interrupt = &rtl8211f_ack_interrupt,
.config_intr = &rtl8211f_config_intr,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
- .phy_id = 0x001cc961,
+ PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
- .phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
.config_init = &rtl8366rb_config_init,
+ /* These interrupts are handled by the irq controller
+ * embedded inside the RTL8366RB, they get unmasked when the
+ * irq is requested and ACKed by reading the status register,
+ * which is done by the irqchip code.
+ */
+ .ack_interrupt = genphy_no_ack_interrupt,
+ .config_intr = genphy_no_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
},
module_phy_driver(realtek_drvs);
-static struct mdio_device_id __maybe_unused realtek_tbl[] = {
- { 0x001cc816, 0x001fffff },
- { 0x001cc910, 0x001fffff },
- { 0x001cc912, 0x001fffff },
- { 0x001cc913, 0x001fffff },
- { 0x001cc914, 0x001fffff },
- { 0x001cc915, 0x001fffff },
- { 0x001cc916, 0x001fffff },
- { 0x001cc961, 0x001fffff },
+static const struct mdio_device_id __maybe_unused realtek_tbl[] = {
+ { PHY_ID_MATCH_VENDOR(0x001cc800) },
{ }
};