.band = NL80211_BAND_2GHZ, \
.center_freq = (_freq), \
.hw_value = (_channel), \
- .flags = IEEE80211_CHAN_DISABLED, \
.max_antenna_gain = 0, \
.max_power = 30, \
}
.band = NL80211_BAND_5GHZ, \
.center_freq = 5000 + (5 * (_channel)), \
.hw_value = (_channel), \
- .flags = IEEE80211_CHAN_DISABLED, \
.max_antenna_gain = 0, \
.max_power = 30, \
}
* triples, returning a pointer to the substring whose first element
* matches tag
*/
-const struct brcmf_tlv *
+static const struct brcmf_tlv *
brcmf_parse_tlvs(const void *buf, int buflen, uint key)
{
const struct brcmf_tlv *elt = buf;
goto out_err;
}
- data += sizeof(struct brcmf_pno_scanresults_le);
netinfo_start = brcmf_get_netinfo_array(pfn_result);
for (i = 0; i < result_count; i++) {
return -EINVAL;
}
- data += sizeof(struct brcmf_pno_scanresults_le);
- netinfo = (struct brcmf_pno_net_info_le *)data;
+ netinfo = brcmf_get_netinfo_array(pfn_result);
memcpy(cfg->wowl.nd->ssid.ssid, netinfo->SSID, netinfo->SSID_len);
cfg->wowl.nd->ssid.ssid_len = netinfo->SSID_len;
cfg->wowl.nd->n_channels = 1;
pval |= AES_ENABLED;
break;
default:
- brcmf_err("Ivalid unicast security info\n");
+ brcmf_err("Invalid unicast security info\n");
}
offset++;
}
wpa_auth |= WPA2_AUTH_1X_SHA256;
break;
default:
- brcmf_err("Ivalid key mgmt info\n");
+ brcmf_err("Invalid key mgmt info\n");
}
offset++;
}
kfree(af_params);
} else {
brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control);
- brcmf_dbg_hex_dump(true, buf, len, "payload, len=%Zu\n", len);
+ brcmf_dbg_hex_dump(true, buf, len, "payload, len=%zu\n", len);
}
exit:
return ret;
}
+static int
+brcmf_cfg80211_update_conn_params(struct wiphy *wiphy,
+ struct net_device *ndev,
+ struct cfg80211_connect_params *sme,
+ u32 changed)
+{
+ struct brcmf_if *ifp;
+ int err;
+
+ if (!(changed & UPDATE_ASSOC_IES))
+ return 0;
+
+ ifp = netdev_priv(ndev);
+ err = brcmf_vif_set_mgmt_ie(ifp->vif, BRCMF_VNDR_IE_ASSOCREQ_FLAG,
+ sme->ie, sme->ie_len);
+ if (err)
+ brcmf_err("Set Assoc REQ IE Failed\n");
+ else
+ brcmf_dbg(TRACE, "Applied Vndr IEs for Assoc request\n");
+
+ return err;
+}
+
#ifdef CONFIG_PM
static int
brcmf_cfg80211_set_rekey_data(struct wiphy *wiphy, struct net_device *ndev,
.crit_proto_start = brcmf_cfg80211_crit_proto_start,
.crit_proto_stop = brcmf_cfg80211_crit_proto_stop,
.tdls_oper = brcmf_cfg80211_tdls_oper,
+ .update_connect_params = brcmf_cfg80211_update_conn_params,
};
struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg,
u32 i, j;
u32 total;
u32 chaninfo;
- u32 index;
pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
ch.bw == BRCMU_CHAN_BW_80)
continue;
- channel = band->channels;
- index = band->n_channels;
+ channel = NULL;
for (j = 0; j < band->n_channels; j++) {
- if (channel[j].hw_value == ch.control_ch_num) {
- index = j;
+ if (band->channels[j].hw_value == ch.control_ch_num) {
+ channel = &band->channels[j];
break;
}
}
- channel[index].center_freq =
- ieee80211_channel_to_frequency(ch.control_ch_num,
- band->band);
- channel[index].hw_value = ch.control_ch_num;
+ if (!channel) {
+ /* It seems firmware supports some channel we never
+ * considered. Something new in IEEE standard?
+ */
+ brcmf_err("Ignoring unexpected firmware channel %d\n",
+ ch.control_ch_num);
+ continue;
+ }
+
+ if (channel->orig_flags & IEEE80211_CHAN_DISABLED)
+ continue;
/* assuming the chanspecs order is HT20,
* HT40 upper, HT40 lower, and VHT80.
*/
if (ch.bw == BRCMU_CHAN_BW_80) {
- channel[index].flags &= ~IEEE80211_CHAN_NO_80MHZ;
+ channel->flags &= ~IEEE80211_CHAN_NO_80MHZ;
} else if (ch.bw == BRCMU_CHAN_BW_40) {
- brcmf_update_bw40_channel_flag(&channel[index], &ch);
+ brcmf_update_bw40_channel_flag(channel, &ch);
} else {
/* enable the channel and disable other bandwidths
* for now as mentioned order assure they are enabled
* for subsequent chanspecs.
*/
- channel[index].flags = IEEE80211_CHAN_NO_HT40 |
- IEEE80211_CHAN_NO_80MHZ;
+ channel->flags = IEEE80211_CHAN_NO_HT40 |
+ IEEE80211_CHAN_NO_80MHZ;
ch.bw = BRCMU_CHAN_BW_20;
cfg->d11inf.encchspec(&ch);
chaninfo = ch.chspec;
&chaninfo);
if (!err) {
if (chaninfo & WL_CHAN_RADAR)
- channel[index].flags |=
+ channel->flags |=
(IEEE80211_CHAN_RADAR |
IEEE80211_CHAN_NO_IR);
if (chaninfo & WL_CHAN_PASSIVE)
- channel[index].flags |=
+ channel->flags |=
IEEE80211_CHAN_NO_IR;
}
}
}
#ifdef CONFIG_PM
-static struct wiphy_wowlan_support brcmf_wowlan_support = {
+static const struct wiphy_wowlan_support brcmf_wowlan_support = {
.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
.n_patterns = BRCMF_WOWL_MAXPATTERNS,
.pattern_max_len = BRCMF_WOWL_MAXPATTERNSIZE,
{
#ifdef CONFIG_PM
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+ struct wiphy_wowlan_support *wowl;
+
+ wowl = kmemdup(&brcmf_wowlan_support, sizeof(brcmf_wowlan_support),
+ GFP_KERNEL);
+ if (!wowl) {
+ brcmf_err("only support basic wowlan features\n");
+ wiphy->wowlan = &brcmf_wowlan_support;
+ return;
+ }
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO)) {
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_ND)) {
- brcmf_wowlan_support.flags |= WIPHY_WOWLAN_NET_DETECT;
+ wowl->flags |= WIPHY_WOWLAN_NET_DETECT;
+ wowl->max_nd_match_sets = BRCMF_PNO_MAX_PFN_COUNT;
init_waitqueue_head(&cfg->wowl.nd_data_wait);
}
}
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL_GTK)) {
- brcmf_wowlan_support.flags |= WIPHY_WOWLAN_SUPPORTS_GTK_REKEY;
- brcmf_wowlan_support.flags |= WIPHY_WOWLAN_GTK_REKEY_FAILURE;
+ wowl->flags |= WIPHY_WOWLAN_SUPPORTS_GTK_REKEY;
+ wowl->flags |= WIPHY_WOWLAN_GTK_REKEY_FAILURE;
}
- wiphy->wowlan = &brcmf_wowlan_support;
+ wiphy->wowlan = wowl;
#endif
}
wiphy->bands[NL80211_BAND_5GHZ] = band;
}
}
- err = brcmf_setup_wiphybands(wiphy);
- return err;
+
+ wiphy_read_of_freq_limits(wiphy);
+
+ return 0;
}
static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
kfree(wiphy->bands[NL80211_BAND_5GHZ]->channels);
kfree(wiphy->bands[NL80211_BAND_5GHZ]);
}
+#if IS_ENABLED(CONFIG_PM)
+ if (wiphy->wowlan != &brcmf_wowlan_support)
+ kfree(wiphy->wowlan);
+#endif
wiphy_free(wiphy);
}
goto priv_out;
}
+ err = brcmf_setup_wiphybands(wiphy);
+ if (err) {
+ brcmf_err("Setting wiphy bands failed (%d)\n", err);
+ goto wiphy_unreg_out;
+ }
+
/* If cfg80211 didn't disable 40MHz HT CAP in wiphy_register(),
* setup 40MHz in 2GHz band and enable OBSS scanning.
*/
OSDN Git Service
