};
static struct calling_interface_buffer *buffer;
-static struct page *bufferpage;
static DEFINE_MUTEX(buffer_mutex);
static int hwswitch_state;
}
}
-/* Derived from information in DellWirelessCtl.cpp:
- Class 17, select 11 is radio control. It returns an array of 32-bit values.
-
- Input byte 0 = 0: Wireless information
-
- result[0]: return code
- result[1]:
- Bit 0: Hardware switch supported
- Bit 1: Wifi locator supported
- Bit 2: Wifi is supported
- Bit 3: Bluetooth is supported
- Bit 4: WWAN is supported
- Bit 5: Wireless keyboard supported
- Bits 6-7: Reserved
- Bit 8: Wifi is installed
- Bit 9: Bluetooth is installed
- Bit 10: WWAN is installed
- Bits 11-15: Reserved
- Bit 16: Hardware switch is on
- Bit 17: Wifi is blocked
- Bit 18: Bluetooth is blocked
- Bit 19: WWAN is blocked
- Bits 20-31: Reserved
- result[2]: NVRAM size in bytes
- result[3]: NVRAM format version number
-
- Input byte 0 = 2: Wireless switch configuration
- result[0]: return code
- result[1]:
- Bit 0: Wifi controlled by switch
- Bit 1: Bluetooth controlled by switch
- Bit 2: WWAN controlled by switch
- Bits 3-6: Reserved
- Bit 7: Wireless switch config locked
- Bit 8: Wifi locator enabled
- Bits 9-14: Reserved
- Bit 15: Wifi locator setting locked
- Bits 16-31: Reserved
-*/
+/*
+ * Derived from information in smbios-wireless-ctl:
+ *
+ * cbSelect 17, Value 11
+ *
+ * Return Wireless Info
+ * cbArg1, byte0 = 0x00
+ *
+ * cbRes1 Standard return codes (0, -1, -2)
+ * cbRes2 Info bit flags:
+ *
+ * 0 Hardware switch supported (1)
+ * 1 WiFi locator supported (1)
+ * 2 WLAN supported (1)
+ * 3 Bluetooth (BT) supported (1)
+ * 4 WWAN supported (1)
+ * 5 Wireless KBD supported (1)
+ * 6 Uw b supported (1)
+ * 7 WiGig supported (1)
+ * 8 WLAN installed (1)
+ * 9 BT installed (1)
+ * 10 WWAN installed (1)
+ * 11 Uw b installed (1)
+ * 12 WiGig installed (1)
+ * 13-15 Reserved (0)
+ * 16 Hardware (HW) switch is On (1)
+ * 17 WLAN disabled (1)
+ * 18 BT disabled (1)
+ * 19 WWAN disabled (1)
+ * 20 Uw b disabled (1)
+ * 21 WiGig disabled (1)
+ * 20-31 Reserved (0)
+ *
+ * cbRes3 NVRAM size in bytes
+ * cbRes4, byte 0 NVRAM format version number
+ *
+ *
+ * Set QuickSet Radio Disable Flag
+ * cbArg1, byte0 = 0x01
+ * cbArg1, byte1
+ * Radio ID value:
+ * 0 Radio Status
+ * 1 WLAN ID
+ * 2 BT ID
+ * 3 WWAN ID
+ * 4 UWB ID
+ * 5 WIGIG ID
+ * cbArg1, byte2 Flag bits:
+ * 0 QuickSet disables radio (1)
+ * 1-7 Reserved (0)
+ *
+ * cbRes1 Standard return codes (0, -1, -2)
+ * cbRes2 QuickSet (QS) radio disable bit map:
+ * 0 QS disables WLAN
+ * 1 QS disables BT
+ * 2 QS disables WWAN
+ * 3 QS disables UWB
+ * 4 QS disables WIGIG
+ * 5-31 Reserved (0)
+ *
+ * Wireless Switch Configuration
+ * cbArg1, byte0 = 0x02
+ *
+ * cbArg1, byte1
+ * Subcommand:
+ * 0 Get config
+ * 1 Set config
+ * 2 Set WiFi locator enable/disable
+ * cbArg1,byte2
+ * Switch settings (if byte 1==1):
+ * 0 WLAN sw itch control (1)
+ * 1 BT sw itch control (1)
+ * 2 WWAN sw itch control (1)
+ * 3 UWB sw itch control (1)
+ * 4 WiGig sw itch control (1)
+ * 5-7 Reserved (0)
+ * cbArg1, byte2 Enable bits (if byte 1==2):
+ * 0 Enable WiFi locator (1)
+ *
+ * cbRes1 Standard return codes (0, -1, -2)
+ * cbRes2 QuickSet radio disable bit map:
+ * 0 WLAN controlled by sw itch (1)
+ * 1 BT controlled by sw itch (1)
+ * 2 WWAN controlled by sw itch (1)
+ * 3 UWB controlled by sw itch (1)
+ * 4 WiGig controlled by sw itch (1)
+ * 5-6 Reserved (0)
+ * 7 Wireless sw itch config locked (1)
+ * 8 WiFi locator enabled (1)
+ * 9-14 Reserved (0)
+ * 15 WiFi locator setting locked (1)
+ * 16-31 Reserved (0)
+ *
+ * Read Local Config Data (LCD)
+ * cbArg1, byte0 = 0x10
+ * cbArg1, byte1 NVRAM index low byte
+ * cbArg1, byte2 NVRAM index high byte
+ * cbRes1 Standard return codes (0, -1, -2)
+ * cbRes2 4 bytes read from LCD[index]
+ * cbRes3 4 bytes read from LCD[index+4]
+ * cbRes4 4 bytes read from LCD[index+8]
+ *
+ * Write Local Config Data (LCD)
+ * cbArg1, byte0 = 0x11
+ * cbArg1, byte1 NVRAM index low byte
+ * cbArg1, byte2 NVRAM index high byte
+ * cbArg2 4 bytes to w rite at LCD[index]
+ * cbArg3 4 bytes to w rite at LCD[index+4]
+ * cbArg4 4 bytes to w rite at LCD[index+8]
+ * cbRes1 Standard return codes (0, -1, -2)
+ *
+ * Populate Local Config Data from NVRAM
+ * cbArg1, byte0 = 0x12
+ * cbRes1 Standard return codes (0, -1, -2)
+ *
+ * Commit Local Config Data to NVRAM
+ * cbArg1, byte0 = 0x13
+ * cbRes1 Standard return codes (0, -1, -2)
+ */
static int dell_rfkill_set(void *data, bool blocked)
{
(status & BIT(4)) >> 4);
seq_printf(s, "Bit 5 : Wireless keyboard supported: %lu\n",
(status & BIT(5)) >> 5);
+ seq_printf(s, "Bit 6 : UWB supported: %lu\n",
+ (status & BIT(6)) >> 6);
+ seq_printf(s, "Bit 7 : WiGig supported: %lu\n",
+ (status & BIT(7)) >> 7);
seq_printf(s, "Bit 8 : Wifi is installed: %lu\n",
(status & BIT(8)) >> 8);
seq_printf(s, "Bit 9 : Bluetooth is installed: %lu\n",
(status & BIT(9)) >> 9);
seq_printf(s, "Bit 10: WWAN is installed: %lu\n",
(status & BIT(10)) >> 10);
+ seq_printf(s, "Bit 11: UWB installed: %lu\n",
+ (status & BIT(11)) >> 11);
+ seq_printf(s, "Bit 12: WiGig installed: %lu\n",
+ (status & BIT(12)) >> 12);
+
seq_printf(s, "Bit 16: Hardware switch is on: %lu\n",
(status & BIT(16)) >> 16);
seq_printf(s, "Bit 17: Wifi is blocked: %lu\n",
(status & BIT(18)) >> 18);
seq_printf(s, "Bit 19: WWAN is blocked: %lu\n",
(status & BIT(19)) >> 19);
+ seq_printf(s, "Bit 20: UWB is blocked: %lu\n",
+ (status & BIT(20)) >> 20);
+ seq_printf(s, "Bit 21: WiGig is blocked: %lu\n",
+ (status & BIT(21)) >> 21);
seq_printf(s, "\nhwswitch_state:\t0x%X\n", hwswitch_state);
seq_printf(s, "Bit 0 : Wifi controlled by switch: %lu\n",
(hwswitch_state & BIT(1)) >> 1);
seq_printf(s, "Bit 2 : WWAN controlled by switch: %lu\n",
(hwswitch_state & BIT(2)) >> 2);
+ seq_printf(s, "Bit 3 : UWB controlled by switch: %lu\n",
+ (hwswitch_state & BIT(3)) >> 3);
+ seq_printf(s, "Bit 4 : WiGig controlled by switch: %lu\n",
+ (hwswitch_state & BIT(4)) >> 4);
seq_printf(s, "Bit 7 : Wireless switch config locked: %lu\n",
(hwswitch_state & BIT(7)) >> 7);
seq_printf(s, "Bit 8 : Wifi locator enabled: %lu\n",
* Allocate buffer below 4GB for SMI data--only 32-bit physical addr
* is passed to SMI handler.
*/
- bufferpage = alloc_page(GFP_KERNEL | GFP_DMA32);
- if (!bufferpage) {
+ buffer = (void *)__get_free_page(GFP_KERNEL | GFP_DMA32);
+ if (!buffer) {
ret = -ENOMEM;
goto fail_buffer;
}
- buffer = page_address(bufferpage);
ret = dell_setup_rfkill();
fail_backlight:
dell_cleanup_rfkill();
fail_rfkill:
- free_page((unsigned long)bufferpage);
+ free_page((unsigned long)buffer);
fail_buffer:
platform_device_del(platform_device);
fail_platform_device2:
OSDN Git Service
