+2009-08-10 Paul Pluzhnikov <ppluzhnikov@google.com>
+
+ * objfiles.c (qsort_cmp): Remove assert.
+ (preferred_obj_section): New function.
+ (update_section_map): Filter duplicates.
+
+2009-08-10 Tristan Gingold <gingold@adacore.com>
+
+ * solib-darwin.c (find_program_interpreter): Simplify the code by
+ looking up for the load_dylinker command instead of reading the
+ corresponding (but deprecated) section.
+ (darwin_solib_create_inferior_hook): Adjust: do not free the
+ interpreter path.
+
+2009-08-10 Tristan Gingold <gingold@adacore.com>
+
+ * i386-darwin-tdep.c (i386_m128_p): New function.
+ (i386_darwin_arg_type_alignment): Ditto.
+ (i386_darwin_push_dummy_call): Ditto.
+ (i386_darwin_init_abi): Define Darwin specific push_dummy_call.
+ Adjust long_double size. Adjust pc offset in setjump buffer.
+
+2009-08-10 Hui Zhu <teawater@gmail.com>
+
+ Add Linux AMD64 process record support.
+
+ * amd64-linux-tdep.c (amd64_linux_record_tdep): New variable.
+ This struct has the argument for the function
+ "record_linux_system_call".
+ (amd64_linux_syscall_record): New function. Parse the
+ system call instruction and call function
+ "record_linux_system_call" to record execute log.
+ (i386_linux_init_abi): Initialize "amd64_linux_record_tdep".
+ Set "amd64_linux_syscall_record" to "i386_syscall_record".
+
+2009-08-10 Hui Zhu <teawater@gmail.com>
+
+ Add process record Linux system call 64 bits support.
+
+ * linux-record.h (linux_record_tdep): Add size_pointer,
+ size_size_t, size_iovec and arg6. Change the values of
+ size_int, size_long and size_ulong to
+ gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT,
+ gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT,
+ gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT.
+ * i386-linux-tdep.c (i386_linux_init_abi): Ditto.
+ (i386_linux_intx80_sysenter_record): Add a check for system
+ call number.
+ * linux-record.c (record_linux_system_call): Make this
+ function support 64 bits.
+
+2009-08-10 Hui Zhu <teawater@gmail.com>
+
+ Add AMD64 process record instruction set support.
+
+ * i386-tdep.h (gdbarch_tdep): Add record_regmap for registers
+ because the AMD64's registers order in GDB is not same with
+ I386 instructions.
+ Add i386_syscall_record to be the syscall function handle
+ interface.
+ (record_i386_regnum): Number for record_regmap.
+ * i386-tdep.c (OT_QUAD): For 64 bits.
+ (i386_record_s): Add rex_x, rex_b, rip_offset and
+ popl_esp_hack for AMD64 instruction set. And regmap for
+ record_regmap.
+ (i386_record_lea_modrm_addr): Support AMD64 instruction set
+ 64 bits lea.
+ (i386_record_lea_modrm): Ditto.
+ (i386_record_push): New function. Record the execution log
+ of push.
+ (I386_RECORD_ARCH_LIST_ADD_REG): New macro to record the
+ register.
+ (i386_process_record): Support AMD64 instruction set.
+ * amd64-tdep.c (amd64_record_regmap): For record_regmap.
+ (amd64_init_abi): Set amd64_record_regmap to record_regmap.
+
+2009-08-08 Pedro Alves <pedro@codesourcery.com>
+
+ * bfd-target.c (struct target_bfd_data): New.
+ (target_bfd_xfer_partial): Adjust to get at the section table from
+ the new structure.
+ (target_bfd_get_section_table): Ditto.
+ (target_bfd_xclose): Ditto. Get the bfd pointer from the
+ target_bfd_data structure, from the section table.
+ (target_bfd_reopen): Store a struct target_bfd_data in the
+ target_ops to_data field, instead of a target_section_table.
+
+2009-08-08 Aleksandar Ristovski <aristovski@qnx.com>
+ Hui Zhu <teawater@gmail.com>
+
+ * record.c (record_store_registers): Remove unused variable.
+
+2009-08-07 Tom Tromey <tromey@redhat.com>
+
+ * language.c (set_language_command): Strip whitespace.
+ (set_type_command): Likewise.
+ (set_range_command): Likewise.
+
+2009-08-07 Tom Tromey <tromey@redhat.com>
+
+ PR gdb/8869:
+ * language.c (language_completer): New function.
+ (range_or_type_completer): New function.
+ (case_completer): New function.
+ (_initialize_language): Set completers.
+ * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
+ command.
+ (add_setshow_string_noescape_cmd): Likewise.
+ (add_setshow_integer_cmd): Likewise.
+ (add_setshow_uinteger_cmd): Likewise.
+ (add_setshow_zinteger_cmd): Likewise.
+ (add_setshow_zuinteger_cmd): Likewise.
+ * command.h (add_setshow_string_cmd,
+ add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
+ add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
+
+2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
+
+ gold/10400
+ * dwarf2-frame.c (qsort_fde_cmp): Use stable sort.
+
+2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
+
+ * dwarf2-frame.c (struct dwarf2_cie): Remove 'next'.
+ (struct dwarf2_cie_table): New.
+ (struct dwarf2_fde): Remove 'next'.
+ (struct dwarf2_fde_table): New.
+ (struct comp_unit): Remove 'cie'.
+ (bsearch_cie_cmp, bsearch_fde_cmp): New function.
+ (find_cie, dwarf2_frame_find_fde): Use bsearch.
+ (add_cie, add_fde): Use array instead of linked list.
+ (decode_frame_entry, decode_frame_entry_1): New parameters.
+ (qsort_fde_cmp): New function.
+ (dwarf2_build_frame_info): Adjust.
+
+2009-08-06 Don Lee <don.lee@sunplusct.com>
+
+ * score-tdep.c: Support a new Sunplus CT S+core variant, S+core 3.
+ * score-tdep.h: Ditto.
+ * NEWS: Ditto.
+ * configure.tgt: Test do we have a simulator.
+ * MAINTAINERS: Add myself under target score
+
+2009-08-06 Nick Roberts <nickrob@snap.net.nz>
+
+ * utils.c (defaulted_query): Don't ask for confirmation if server
+ prefix is used.
+
+2009-08-05 Tom Tromey <tromey@redhat.com>
+
+ * spu-tdep.h (SPUADDR_SPU): Cast result to int.
+
+2009-08-04 Paul Pluzhnikov <ppluzhnikov@google.com>
+
+ * objfiles.h (OBJF_KEEPBFD): Delete.
+ (gdb_bfd_unref): New prototype.
+ * objfiles.c (gdb_bfd_unref): New function.
+ (free_objfile): Call gdb_bfd_unref.
+ * solib.c (free_so): Likewise.
+ (symbol_add_stub): Set refcount.
+
+2009-08-04 Hui Zhu <teawater@gmail.com>
+ Michael Snyder <msnyder@vmware.com>
+
+ * record.c (record_mem_entry): New field 'mem_entry_not_accessible'.
+ (record_arch_list_add_mem): Initialize 'mem_entry_not_accessible'.
+ (record_wait): Set 'mem_entry_not_accessible' flag if target
+ memory not readable. Don't try to change target memory if
+ 'mem_entry_not_accessible' is set.
+
+2009-08-03 Richard Guenther <rguenther@suse.de>
+ Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Fix memory corruption on reread of file through a symbolic link.
+ * symfile.c (find_separate_debug_file): Initialize CANON_NAME earlier.
+ Allocate DEBUGFILE with length based on CANON_NAME. Free CANON_NAME on
+ all the return paths.
+
+2009-08-03 Jim Ingham <jingham@apple.com>
+ Vladimir Prus <vladimir@codesourcery.com>
+
+ Implement -break-commands
+
+ * breakpoint.c (get_breakpoint, breakpoint_set_commands): New.
+ (commands_command): Use breakpoint_set_commands.
+ * breakpoint.h (get_breakpoint, breakpoint_set_commands): Declare.
+
+ * mi/mi-cmds.h (mi_cmd_break_commands): New.
+ * mi/mi-cmds.c: Register -break-commands.
+ * mi/mi-cmd-break.c (mi_cmd_break_commands, mi_read_next_line)
+ (mi_command_line_array, mi_command_line_array_cnt)
+ (mi_command_line_array_ptr): New.
+
+2009-08-03 Jim Ingham <jingham@apple.com>
+ Vladimir Prus <vladimir@codesourcery.com>
+
+ Refactor reading of commands
+
+ * defs.h (read_command_lines_1): Declare.
+ * cli/cli-script.c (read_next_line): Only return string,
+ do not process.
+ (process_next_line): New, extracted from read_next_line.
+ (recurse_read_control_structure): Take a function pointer to the
+ read function.
+ (get_command_line) Pass the read_next_line as reader function
+ into recurse_read_control_structure.
+ (read_command_lines_1): New, extracted from...
+ (read_command_lines): ...here.
+
+2009-07-31 Kazu Hirata <kazu@codesourcery.com>
+
+ * procfs.c (proc_set_current_signal): Populate mysinfo before
+ copying it to arg.
+ (proc_clear_current_signal): Likewise.
+ (proc_set_watchpoint): Populate pwatch before copying it to arg.
+
+2009-07-31 Michael Snyder <msnyder@vmware.com>
+
+ * remote.c (store_register_using_P): Call putpkt and getpkt
+ directly instead of calling remote_send.
+ (store_registers_using_G): Ditto.
+ (fetch_register_using_p): Ditto.
+
+ * remote.c (store_register_using_P): Make error msg more verbose.
+ (store_registers_using_G): Ditto.
+ (fetch_register_using_p): Ditto.
+
+2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * spu-tdep.c: Include "infcall.h".
+ (spu_address_class_type_flags): New function.
+ (spu_address_class_type_flags_to_name): Likewise.
+ (spu_address_class_name_to_type_flags): Likewise.
+ (spu_pointer_to_address): Handle __ea pointers.
+ (spu_auto_flush_cache_p): New static variable.
+ (spu_objfile_from_frame): New function.
+ (flush_ea_cache, spu_attach_normal_stop): Likewise.
+ (show_spu_auto_flush_cache): Likewise.
+ (spu_gdbarch_init): Install address class handlers.
+ (_initialize_spu_tdep): Attach to normal_stop observer.
+ Install "set spu auto-flush-cache" / "show spu auto-flush-cache"
+ commands.
+
+ * NEWS: Mention "set/show spu auto-flush-cache" commands.
+
+2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * spu-tdep.c: Include "block.h".
+ (setspucmdlist, showspucmdlist): New static variables.
+ (spu_stop_on_load_p): Likewise.
+ (spu_catch_start): New function.
+ (show_spu_command, set_spu_command): New functions.
+ (show_spu_stop_on_load): Likewise.
+ (_initialize_spu_tdep): Attach spu_catch_start to new_objfile observer.
+ Install "set spu" / "show spu" prefix command handler.
+ Install "set spu stop-on-load" / "show spu stop-on-load" command.
+
+ * NEWS: Mention "set/show spu stop-on-load" commands.
+
+2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * ppc-linux-tdep.c: Include "solib.h", "solist.h", "exceptions.h",
+ "arch-utils.h", and "spu-tdep.h".
+ (spu_context_objfile, spe_context_lm_addr, spe_context_offset):
+ New static variables.
+ (spe_context_cache_ptid, spe_context_cache_address): Likewise.
+ (ppc_linux_spe_context_lookup): New function.
+ (ppc_linux_spe_context_inferior_created): Likewise.
+ (ppc_linux_spe_context_solib_loaded): Likewise.
+ (ppc_linux_spe_context_solib_unloaded): Likewise.
+ (ppc_linux_spe_context): Likewise.
+ (struct ppu2spu_cache, struct ppu2spu_data): New data types.
+ (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register,
+ ppu2spu_unwind_register, ppu2spu_sniffer,
+ ppu2spu_dealloc_cache): New functions.
+ (ppu2spu_unwind): New static variable.
+ (ppc_linux_init_abi): Install cross-architecture unwinder.
+ (_initialize_ppc_linux_tdep): Attach to observers.
+
+ * spu-tdep.c (struct spu2ppu_cache): New data type.
+ (spu2ppu_prev_arch, spu2ppu_this_id, spu2ppu_prev_register,
+ spu2ppu_sniffer, spu2ppu_dealloc_cache): New functions.
+ (spu2ppu_unwind): New static variable.
+ (spu_gdbarch_init): Install cross-architecture unwinder.
+
+2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * target.h (enum strata): New value arch_stratum.
+ * target.c (target_require_runnable): Skip arch_stratum targets.
+
+ * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
+ solib-spu.o and spu-multiarch.o to gdb_target_obs.
+ * Makefile.in (ALL_TARGET_OBS): Add solib-spu.o and spu-multiarch.o.
+ (ALLDEPFILES): Add solib-spu.c and spu-multiarch.c.
+
+ * solib-spu.c: New file.
+ * solib-spu.h: New file.
+ * spu-multiarch.c: New file.
+
+ * spu-tdep.h (SPUADDR, SPUADDR_SPU, SPUADDR_ADDR): New macros.
+
+ * spu-tdep.c (struct gdbarch_tdep): New member id.
+ (spu_gdbarch_id): New function.
+ (spu_lslr): New function.
+
+ (spu_address_to_pointer): New function.
+ (spu_pointer_to_address): Support SPU ID address encoding. Use
+ spu_gdbarch_id and spu_lslr.
+ (spu_integer_to_address): Likewise.
+ (spu_frame_unwind_cache): Update for encoded addresses.
+ (spu_unwind_pc, spu_unwind_sp): Likewise.
+ (spu_read_pc, spu_write_pc): Likewise.
+ (spu_push_dummy_call): Likewise.
+ (spu_software_single_step): Likewise.
+ (spu_get_longjmp_target): Likewise.
+ (spu_overlay_update_osect): Likewise.
+
+ (spu_dis_asm_print_address): New function.
+ (gdb_print_insn_spu): Likewise.
+
+ (spu_gdbarch_init): Store SPU ID in tdep structure.
+ Install spu_address_to_pointer and gdb_print_insn_spu.
+
+ * ppc-linux-tdep.c: Include "observer.h", "auxv.h", "elf/common.h"
+ and "solib-spu.h".
+ (ppc_linux_entry_point_addr): New static variable.
+ (ppc_linux_inferior_created): New function.
+ (ppc_linux_displaced_step_location): Likewise.
+ (ppc_linux_init_abi): Enable Cell/B.E. support if supported
+ by the target.
+ (_initialize_ppc_linux_tdep): Attach to inferior_created observer.
+
+ * NEWS: Mention multi-architecture and Cell/B.E. debugging
+ capabilities.
+
+2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * linux-nat.c: Include <sys/vfs.h>.
+ (SPUFS_MAGIC): Define.
+ (spu_enumerate_spu_ids): New function.
+ (linux_proc_xfer_spu): New function.
+ (linux_xfer_partial): Handle TARGET_OBJECT_SPU.
+
+ (iterate_over_spus): New function.
+ (struct linux_spu_corefile_data): New data type.
+ (linux_spu_corefile_callback): New function.
+ (linux_spu_make_corefile_notes): New function.
+ (linux_nat_make_corefile_notes): Call it.
+
+ * corelow.c (struct spuid_list): New data type.
+ (add_to_spuid_list): New function.
+ (core_xfer_partial): Handle TARGET_OBJECT_SPU.
+
+2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * features/Makefile: Allow sub-platform specific expedite settings.
+ (WHICH): Add rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
+ (rs6000/powerpc-cell32l-expedite): Define.
+ (rs6000/powerpc-cell64l-expedite): Likewise.
+ * features/rs6000/powerpc-cell32l.xml: New file.
+ * features/rs6000/powerpc-cell64l.xml: New file.
+ * features/rs6000/powerpc-cell32l.c: New generated file.
+ * features/rs6000/powerpc-cell64l.c: New generated file.
+
+ * regformats/rs6000/powerpc-cell32l.dat: New generated file.
+ * regformats/rs6000/powerpc-cell64l.dat: New generated file.
+
+ * config/djgpp/fnchange.lst: Add mappings for new files.
+
+ * ppc-linux-tdep.h (tdesc_powerpc_cell32l): Add prototype.
+ (tdesc_powerpc_cell64l): Likewise.
+ * ppc-linux-tdep.c: Include "features/rs6000/powerpc-cell32l.c"
+ and "features/rs6000/powerpc-cell64l.c".
+ (_initialize_ppc_linux_tdep): Initialize target descriptions.
+ (ppc_linux_spu_section): New function.
+ (ppc_linux_core_read_description): Detect Cell/B.E. core files.
+ * ppc-linux-nat.c (PPC_FEATURE_CELL): Define.
+ (ppc_linux_read_description): Detect Cell/B.E. architecture.
+
+ * rs6000-tdep.c (rs6000_gdbarch_init): Do not trust BFD wordsize
+ if exec file is not PowerPC architecture.
+
+2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * features/gdb-target.dtd (target): Accept optional
+ <compatible> elements.
+ (compatible): Define element.
+
+ * target-descriptions.h (tdesc_compatible_p): New.
+ (tdesc_add_compatible): New.
+ * target-descriptions.c (arch_p): New VEC_P type.
+ (struct target_desc): New member compatible.
+ (free_target_description): Handle it.
+ (maint_print_c_tdesc_cmd): Likewise.
+ (tdesc_compatible_p): New function.
+ (tdesc_add_compatible): New function.
+
+ * xml-tdesc.c (tdesc_end_compatible): New function.
+ (target_children): Handle <compatible> element.
+
+ * arch-utils.c (choose_architecture_for_target): Accept target
+ description instead of BFD architecture as input. Query target
+ description for compatible architectures.
+ (gdbarch_info_fill): Update call.
+
+ * NEWS: Mention <compatible> element of target descriptions.
+
+2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * breakpoint.c (remove_breakpoints): If removing one breakpoint
+ location fails, still continue to remove other locations.
+ (remove_hw_watchpoints): Likewise.
+ (detach_breakpoints): Likewise.
+
+2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
+
+ * breakpoint.h (enum enable_state): Add bp_startup_disabled.
+ (disable_breakpoints_before_startup): Add prototype.
+ (enable_breakpoints_after_startup): Likewise.
+
+ * breakpoint.c (executing_startup): New static variable.
+ (describe_other_breakpoints): Handle bp_startup_disabled.
+ (check_duplicates_for): Likewise.
+ (disable_breakpoints_before_startup): New function.
+ (enable_breakpoints_after_startup): New function.
+ (create_breakpoint): Mark new breakpoints as bp_startup_disabled
+ if executing_startup flag is true.
+ (break_command_really): Likewise.
+ (breakpoint_re_set_one): Skip bp_startup_disabled breakpoints.
+
+2009-07-31 Julian Brown <julian@codesourcery.com>
+
+ * arm-linux-tdep.c (arch-utils.h, inferior.h, gdbthread.h, symfile.h):
+ Include files.
+ (arm_linux_cleanup_svc, arm_linux_copy_svc): New.
+ (cleanup_kernel_helper_return, arm_catch_kernel_helper_return): New.
+ (arm_linux_displaced_step_copy_insn): New.
+ (arm_linux_init_abi): Initialise displaced stepping callbacks.
+ * arm-tdep.c (DISPLACED_STEPPING_ARCH_VERSION): New macro.
+ (ARM_NOP): New.
+ (displaced_read_reg, displaced_in_arm_mode, branch_write_pc)
+ (bx_write_pc, load_write_pc, alu_write_pc, displaced_write_reg)
+ (insn_references_pc, copy_unmodified, cleanup_preload, copy_preload)
+ (copy_preload_reg, cleanup_copro_load_store, copy_copro_load_store)
+ (cleanup_branch, copy_b_bl_blx, copy_bx_blx_reg, cleanup_alu_imm)
+ (copy_alu_imm, cleanup_alu_reg, copy_alu_reg)
+ (cleanup_alu_shifted_reg, copy_alu_shifted_reg, cleanup_load)
+ (cleanup_store, copy_extra_ld_st, copy_ldr_str_ldrb_strb)
+ (cleanup_block_load_all, cleanup_block_store_pc)
+ (cleanup_block_load_pc, copy_block_xfer, cleanup_svc, copy_svc)
+ (copy_undef, copy_unpred): New.
+ (decode_misc_memhint_neon, decode_unconditional)
+ (decode_miscellaneous, decode_dp_misc, decode_ld_st_word_ubyte)
+ (decode_media, decode_b_bl_ldmstm, decode_ext_reg_ld_st)
+ (decode_svc_copro, arm_process_displaced_insn)
+ (arm_displaced_init_closure, arm_displaced_step_copy_insn)
+ (arm_displaced_step_fixup): New.
+ (arm_gdbarch_init): Initialise max insn length field.
+ * arm-tdep.h (DISPLACED_TEMPS, DISPLACED_MODIFIED_INSNS): New
+ macros.
+ (displaced_step_closure, pc_write_style): New.
+ (arm_displaced_init_closure, displaced_read_reg)
+ (arm_process_displaced_insn, arm_displaced_init_closure)
+ (displaced_read_reg, displaced_write_reg, arm_displaced_step_copy_insn)
+ (arm_displaced_step_fixup): Add prototypes.
+
+2009-07-31 Pedro Alves <pedro@codesourcery.com>
+ Julian Brown <julian@codesourcery.com>
+
+ * infrun.c (displaced_step_fixup): If this is a software
+ single-stepping arch, don't tell the target to single-step.
+ (maybe_software_singlestep): Return 0 if we're using displaced
+ stepping.
+ (resume): If this is a software single-stepping arch, and
+ displaced-stepping is enabled, use it for all single-step
+ requests.
+
+2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * Makefile.in (ACLOCAL, ACLOCAL_AMFLAGS, aclocal_m4_deps)
+ (AUTOCONF, configure_deps, AUTOHEADER): New variables.
+ ($(srcdir)/aclocal.m4, $(srcdir)/configure, $(srcdir)/config.in)
+ (am--refresh): New rules.
+ (stamp-h, config.status): List config.in and configure including
+ $(srcdir)/ prefix.
+ * aclocal.m4: Regenerate.
+ * configure: Regenerate.
+
+2009-07-30 Thomas Schwinge <tschwinge@gnu.org>
+
+ * gnu-nat.c (add_task_commands) <stopped>: Register the correct
+ callback function.
+
+2009-07-30 H.J. Lu <hongjiu.lu@intel.com>
+
+ * ia64-tdep.c (ia64_access_reg): Correct paddress.
+
+2009-07-30 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Replace public function varobj_list by all_root_varobjs iterator.
+ * mi/mi-cmd-var.c (struct mi_cmd_var_update, mi_cmd_var_update_iter):
+ New.
+ (mi_cmd_var_update): Replace the varobj_list call by all_root_varobjs.
+ Remove the variables rootlist, cr. New variable data.
+ * varobj.c (rootcount, varobj_list): Remove.
+ (install_variable, uninstall_variable): Remove the rootcount updates.
+ (all_root_varobjs): New function.
+ (varobj_invalidate): Use the all_root_varobjs call. Move the code to...
+ (varobj_invalidate_iter): ... a new function.
+ * varobj.h (varobj_list): Remove the prototype.
+ (all_root_varobjs): New prototype.
+
+2009-07-29 Paul Pluzhnikov <ppluzhnikov@google.com>
+
+ PR gdb/6817
+ * dbxread.c (read_dbx_symtab): Reduce stack use.
+
+2009-07-29 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ Fix gcc-4.5 HEAD warnings.
+ * cp-name-parser.y (%union <typed_val_int>, %token GLOBAL)
+ (GLOBAL_CONSTRUCTORS, GLOBAL_DESTRUCTORS, demangler_special <GLOBAL>):
+ Remove.
+ (yylex <"global constructors keyed to ">)
+ (yylex <"global destructors keyed to ">): Base it on DEMANGLER_SPECIAL.
+ (cp_comp_to_string): Remove variables str, prefix and buf. Remove the
+ GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS handling.
+ (cp_print): Remove the GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS
+ handling.
+
+2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * NEWS: Mention ARM VFP support.
+ * target-descriptions.c (tdesc_register_type): Make public.
+ (tdesc_unnumbered_register): New function.
+ (tdesc_register_reggroup_p): Allow missing
+ pseudo_register_reggroup_p.
+ * target-descriptions.h (tdesc_register_type): Declare.
+ (tdesc_unnumbered_register): Declare.
+ * arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions.
+ (arm_push_dummy_call): Use arm_neon_quad_write.
+ (arm_neon_double_type, arm_neon_quad_type): New functions.
+ (arm_register_type): Handle VFP and NEON registers. Override the
+ types of double-precision registers for NEON. Disable FPA registers
+ if they are not present.
+ (arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers.
+ (arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read.
+ (arm_register_name): Handle VFP single and NEON quad registers.
+ (arm_pseudo_read, arm_pseudo_write): New functions.
+ (arm_gdbarch_init): Check for VFP and NEON in the target description.
+ Assign numbers to double-precision registers. Register VFP and NEON
+ pseudo registers. Remove a shadowed "i" variable.
+ * arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and
+ ARM_D31_REGNUM.
+ (struct gdbarch_tdep): Add have_neon_pseudos, have_neon,
+ have_vfp_registers, have_vfp_pseudos, neon_double_type,
+ and neon_quad_type.
+
+ * features/Makefile: Make expedite settings only architecture
+ specific.
+ (WHICH): Add new ARM descriptions.
+ * features/arm-with-neon.xml, features/arm-with-vfpv2.c,
+ features/arm-with-vfpv3.c, features/arm-vfpv2.xml,
+ features/arm-vfpv3.xml, features/arm-with-vfpv2.xml,
+ features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files.
+ * regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat,
+ regformats/arm-with-vfpv3.dat: Generate.
+
2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
* infrun.c (handle_inferior_event): Clear trap_expected after
OSDN Git Service
