-# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2002, 2003, 2004, 2007, 2008, 2009 Free Software Foundation, Inc.
+# Copyright 1988, 1990-1992, 1994-2000, 2002-2004, 2007-2012 Free
+# Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# ".debug-id/ab/cdef.debug" file.
-if $tracelevel then {
- strace $tracelevel
-}
-
#
# test running programs
#
-set prms_id 0
-set bug_id 0
set testfile "sepdebug"
set srcfile ${testfile}.c
# ${binfile}, which is just like the executable ($binfile) but without
# the debuginfo. Instead $binfile has a .gnudebuglink section which contains
# the name of a debuginfo only file. This file will be stored in the
-# gdb.base/.debug subdirectory.
+# gdb.base/ subdirectory.
if [gdb_gnu_strip_debug $binfile] {
# check that you have a recent version of strip and objcopy installed
fail "No debug information found."
}
-if [target_info exists gdb_stub] {
- gdb_step_for_stub;
-}
#
# test simple breakpoint setting commands
#
-# Test deleting all breakpoints when there are none installed,
-# GDB should not prompt for confirmation.
-# Note that gdb-init.exp provides a "delete_breakpoints" proc
-# for general use elsewhere.
-
-send_gdb "delete breakpoints\n"
-gdb_expect {
- -re "Delete all breakpoints.*$" {
- send_gdb "y\n"
- gdb_expect {
- -re "$gdb_prompt $" {
- fail "Delete all breakpoints when none (unexpected prompt)"
- }
- timeout { fail "Delete all breakpoints when none (timeout after unexpected prompt)" }
- }
- }
- -re ".*$gdb_prompt $" { pass "Delete all breakpoints when none" }
- timeout { fail "Delete all breakpoints when none (timeout)" }
-}
-
#
# test break at function
#
set bp_location5 [gdb_get_line_number "set breakpoint 5 here"]
set bp_location6 [gdb_get_line_number "set breakpoint 6 here"]
-#
-# check to see what breakpoints are set
-#
-if [target_info exists gdb_stub] {
- set main_line $bp_location5
-} else {
- set main_line $bp_location6
-}
+set main_line $bp_location6
set bp_location7 [gdb_get_line_number "set breakpoint 7 here"]
set bp_location8 [gdb_get_line_number "set breakpoint 8 here"]
#
# test break at line number
#
-send_gdb "tbreak $bp_location1\n"
-gdb_expect {
- -re "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location1.*$gdb_prompt $" { pass "Temporary breakpoint line number #1" }
- -re ".*$gdb_prompt $" { pass "Temporary breakpoint line number #1" }
- timeout { fail "breakpoint line number #1 (timeout)" }
-}
-gdb_test "tbreak $bp_location6" "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location6.*" "Temporary breakpoint line number #2"
+gdb_test "tbreak $bp_location1" \
+ "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location1.*" \
+ "Temporary breakpoint line number #1"
+
+gdb_test "tbreak $bp_location6" \
+ "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location6.*" \
+ "Temporary breakpoint line number #2"
#
# test break at line number in file
#
-send_gdb "tbreak $srcfile:$bp_location2\n"
-gdb_expect {
- -re "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location2.*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" }
- -re ".*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" }
- timeout { fail "Temporary breakpoint line number in file #1 (timeout)" }
-}
+
+gdb_test "tbreak $srcfile:$bp_location2" \
+ "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location2.*" \
+ "Temporary breakpoint line number in file #1"
set bp_location11 [gdb_get_line_number "set breakpoint 11 here"]
gdb_test "tbreak $srcfile:$bp_location11" "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location11.*" "Temporary breakpoint line number in file #2"
# inappropriately. (There are no calls to those system functions
# in this test program.)
#
-if ![runto_main] then { fail "break tests suppressed" }
-
-send_gdb "catch\n"
-gdb_expect {
- -re "Catch requires an event name.*$gdb_prompt $"\
- {pass "catch requires an event name"}
- -re "$gdb_prompt $"\
- {fail "catch requires an event name"}
- timeout {fail "(timeout) catch requires an event name"}
-}
+if ![runto_main] then { fail "sepdebug tests suppressed" }
+gdb_test "catch" "Catch requires an event name.*" \
+ "catch requires an event name"
set name "set catch fork, never expected to trigger"
-send_gdb "catch fork\n"
-gdb_expect {
- -re "Catchpoint \[0-9\]* .fork..*$gdb_prompt $"
- {pass $name}
- -re "Catch of fork not yet implemented.*$gdb_prompt $"
- {pass $name}
- -re "$gdb_prompt $"
- {fail $name}
- timeout {fail "(timeout) $name"}
+gdb_test_multiple "catch fork" $name {
+ -re "Catchpoint \[0-9\]* .fork.*$gdb_prompt $" {
+ pass $name
+ }
+ -re "Catch of fork not yet implemented.*$gdb_prompt $" {
+ pass $name
+ }
}
-
-set name "set catch vfork, never expected to trigger"
-send_gdb "catch vfork\n"
-
# If we are on HP-UX 10.20, we expect an error message to be
# printed if we type "catch vfork" at the gdb gdb_prompt. This is
# because on HP-UX 10.20, we cannot catch vfork events.
-if [istarget "hppa*-hp-hpux10.20"] then {
- gdb_expect {
- -re "Catch of vfork events not supported on HP-UX 10.20..*$gdb_prompt $"
- {pass $name}
- -re "$gdb_prompt $"
- {fail $name}
- timeout {fail "(timeout) $name"}
+set name "set catch vfork, never expected to trigger"
+gdb_test_multiple "catch vfork" $name {
+ -re "Catch of vfork events not supported on HP-UX 10.20.*" {
+ pass $name
}
-} else {
- gdb_expect {
- -re "Catchpoint \[0-9\]* .vfork..*$gdb_prompt $"
- {pass $name}
- -re "Catch of vfork not yet implemented.*$gdb_prompt $"
- {pass $name}
- -re "$gdb_prompt $"
- {fail $name}
- timeout {fail "(timeout) $name"}
+ -re "Catchpoint \[0-9\]* .vfork.*$gdb_prompt $" {
+ pass $name
+ }
+ -re "Catch of vfork not yet implemented.*$gdb_prompt $" {
+ pass $name
}
}
set name "set catch exec, never expected to trigger"
-send_gdb "catch exec\n"
-gdb_expect {
- -re "Catchpoint \[0-9\]* .exec..*$gdb_prompt $"
- {pass $name}
- -re "Catch of exec not yet implemented.*$gdb_prompt $"
- {pass $name}
- -re "$gdb_prompt $" {fail $name}
- timeout {fail "(timeout) $name"}
+gdb_test_multiple "catch exec" $name {
+ -re "Catchpoint \[0-9\]* .exec.*$gdb_prompt $" {
+ pass $name
+ }
+ -re "Catch of exec not yet implemented.*$gdb_prompt $" {
+ pass $name
+ }
}
# Verify that GDB responds gracefully when asked to set a breakpoint
# on a nonexistent source line.
#
-send_gdb "break 999\n"
-gdb_expect {
- -re "No line 999 in file .*$gdb_prompt $"\
- {pass "break on non-existent source line"}
- -re "$gdb_prompt $"\
- {fail "break on non-existent source line"}
- timeout {fail "(timeout) break on non-existent source line"}
-}
+
+gdb_test_no_output "set breakpoint pending off"
+gdb_test "break 999" "No line 999 in the current file." \
+ "break on non-existent source line"
# Run to the desired default location. If not positioned here, the
# tests below don't work.
# the informational message about other breakpoints at the same
# location. We'll hit that bird with this stone too.
#
-send_gdb "break\n"
-gdb_expect {
- -re "Breakpoint \[0-9\]*.*$gdb_prompt $"\
- {pass "break on default location, 1st time"}
- -re "$gdb_prompt $"\
- {fail "break on default location, 1st time"}
- timeout {fail "(timeout) break on default location, 1st time"}
-}
-send_gdb "break\n"
-gdb_expect {
- -re "Note: breakpoint \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\
- {pass "break on default location, 2nd time"}
- -re "$gdb_prompt $"\
- {fail "break on default location, 2nd time"}
- timeout {fail "(timeout) break on default location, 2nd time"}
-}
+gdb_test "break" "Breakpoint \[0-9\]*.*" \
+ "break on default location, 1st time"
-send_gdb "break\n"
-gdb_expect {
- -re "Note: breakpoints \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\
- {pass "break on default location, 3rd time"}
- -re "$gdb_prompt $"\
- {fail "break on default location, 3rd time"}
- timeout {fail "(timeout) break on default location, 3rd time"}
-}
+gdb_test "break" \
+ "Note: breakpoint \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \
+ "break on default location, 2nd time"
-send_gdb "break\n"
-gdb_expect {
- -re "Note: breakpoints \[0-9\]*, \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\
- {pass "break on default location, 4th time"}
- -re "$gdb_prompt $"\
- {fail "break on default location, 4th time"}
- timeout {fail "(timeout) break on default location, 4th time"}
-}
+gdb_test "break" \
+ "Note: breakpoints \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \
+ "break on default location, 3rd time"
+
+gdb_test "break" \
+ "Note: breakpoints \[0-9\]*, \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \
+ "break on default location, 4th time"
# Verify that a "silent" breakpoint can be set, and that GDB is indeed
# "silent" about its triggering.
#
-if ![runto_main] then { fail "break tests suppressed" }
+if ![runto_main] then { fail "sepdebug tests suppressed" }
-send_gdb "break $bp_location1\n"
-gdb_expect {
- -re "Breakpoint (\[0-9\]*) at .*, line $bp_location1.*$gdb_prompt $"\
- {pass "set to-be-silent break bp_location1"}
- -re "$gdb_prompt $"\
- {fail "set to-be-silent break bp_location1"}
- timeout {fail "(timeout) set to-be-silent break bp_location1"}
+gdb_test_multiple "break $bp_location1" \
+ "set to-be-silent break bp_location1" {
+ -re "Breakpoint (\[0-9\]*) at .*, line $bp_location1.*$gdb_prompt $" {
+ pass "set to-be-silent break bp_location1"
+ }
}
-send_gdb "commands $expect_out(1,string)\n"
-send_gdb "silent\n"
-send_gdb "end\n"
-gdb_expect {
- -re ".*$gdb_prompt $"\
- {pass "set silent break bp_location1"}
- timeout {fail "(timeout) set silent break bp_location1"}
-}
+gdb_test "commands $expect_out(1,string)\nsilent\nend" ">end" "set silent break bp_location1"
-send_gdb "info break $expect_out(1,string)\n"
-gdb_expect {
- -re "\[0-9\]*\[ \t\]*breakpoint.*:$bp_location1\r\n\[ \t\]*silent.*$gdb_prompt $"\
- {pass "info silent break bp_location1"}
- -re "$gdb_prompt $"\
- {fail "info silent break bp_location1"}
- timeout {fail "(timeout) info silent break bp_location1"}
-}
-send_gdb "continue\n"
-gdb_expect {
- -re "Continuing.\r\n$gdb_prompt $"\
- {pass "hit silent break bp_location1"}
- -re "$gdb_prompt $"\
- {fail "hit silent break bp_location1"}
- timeout {fail "(timeout) hit silent break bp_location1"}
-}
-send_gdb "bt\n"
-gdb_expect {
- -re "#0 main .* at .*:$bp_location1.*$gdb_prompt $"\
- {pass "stopped for silent break bp_location1"}
- -re "$gdb_prompt $"\
- {fail "stopped for silent break bp_location1"}
- timeout {fail "(timeout) stopped for silent break bp_location1"}
-}
+gdb_test "info break $expect_out(1,string)" \
+ "\[0-9\]*\[ \t\]*breakpoint.*:$bp_location1\r\n\[ \t\]*silent.*" \
+ "info silent break bp_location1"
+
+gdb_test "continue" "Continuing.*" "hit silent break bp_location1"
+
+gdb_test "bt" "#0 main .* at .*:$bp_location1.*" \
+ "stopped for silent break bp_location1"
# Verify that GDB can at least parse a breakpoint with the
# "thread" keyword. (We won't attempt to test here that a
# The gdb.threads subdirectory contains tests for that.)
#
set bp_location12 [gdb_get_line_number "set breakpoint 12 here"]
-send_gdb "break $bp_location12 thread 999\n"
-gdb_expect {
- -re "Unknown thread 999.*$gdb_prompt $"\
- {pass "thread-specific breakpoint on non-existent thread disallowed"}
- -re "$gdb_prompt $"\
- {fail "thread-specific breakpoint on non-existent thread disallowed"}
- timeout {fail "(timeout) thread-specific breakpoint on non-existent thread disallowed"}
-}
-send_gdb "break $bp_location12 thread foo\n"
-gdb_expect {
- -re "Junk after thread keyword..*$gdb_prompt $"\
- {pass "thread-specific breakpoint on bogus thread ID disallowed"}
- -re "$gdb_prompt $"\
- {fail "thread-specific breakpoint on bogus thread ID disallowed"}
- timeout {fail "(timeout) thread-specific breakpoint on bogus thread ID disallowed"}
-}
+
+gdb_test "break $bp_location12 thread 999" "Unknown thread 999.*" \
+ "thread-specific breakpoint on non-existent thread disallowed"
+
+gdb_test "break $bp_location12 thread foo" \
+ "Junk after thread keyword.*" \
+ "thread-specific breakpoint on bogus thread ID disallowed"
# Verify that GDB responds gracefully to a breakpoint command with
# trailing garbage.
#
-send_gdb "break $bp_location12 foo\n"
-gdb_expect {
- -re "Junk at end of arguments..*$gdb_prompt $"\
- {pass "breakpoint with trailing garbage disallowed"}
- -re "$gdb_prompt $"\
- {fail "breakpoint with trailing garbage disallowed"}
- timeout {fail "(timeout) breakpoint with trailing garbage disallowed"}
-}
+
+gdb_test "break $bp_location12 foo" \
+ "Junk at end of arguments.*" \
+ "breakpoint with trailing garbage disallowed"
# Verify that GDB responds gracefully to a "clear" command that has
# no matching breakpoint. (First, get us off the current source line,
# which we know has a breakpoint.)
#
-send_gdb "next\n"
-gdb_expect {
- -re ".*$gdb_prompt $"\
- {pass "step over breakpoint"}
- timeout {fail "(timeout) step over breakpoint"}
-}
-send_gdb "clear 81\n"
-gdb_expect {
- -re "No breakpoint at 81..*$gdb_prompt $"\
- {pass "clear line has no breakpoint disallowed"}
- -re "$gdb_prompt $"\
- {fail "clear line has no breakpoint disallowed"}
- timeout {fail "(timeout) clear line has no breakpoint disallowed"}
-}
-send_gdb "clear\n"
-gdb_expect {
- -re "No breakpoint at this line..*$gdb_prompt $"\
- {pass "clear current line has no breakpoint disallowed"}
- -re "$gdb_prompt $"\
- {fail "clear current line has no breakpoint disallowed"}
- timeout {fail "(timeout) clear current line has no breakpoint disallowed"}
-}
+
+gdb_test "next" "marker1.*" "step over breakpoint"
+
+gdb_test "clear 81" "No breakpoint at 81.*" \
+ "clear line has no breakpoint disallowed"
+
+gdb_test "clear" "No breakpoint at this line.*" \
+ "clear current line has no breakpoint disallowed"
# Verify that we can set and clear multiple breakpoints.
#
# Verify that a breakpoint can be set via a convenience variable.
#
-send_gdb "set \$foo=$bp_location11\n"
-gdb_expect {
- -re "$gdb_prompt $"\
- {pass "set convenience variable \$foo to bp_location11"}
- timeout {fail "(timeout) set convenience variable \$foo to bp_location11"}
-}
-send_gdb "break \$foo\n"
-gdb_expect {
- -re "Breakpoint (\[0-9\]*) at .*, line $bp_location11.*$gdb_prompt $"\
- {pass "set breakpoint via convenience variable"}
- -re "$gdb_prompt $"\
- {fail "set breakpoint via convenience variable"}
- timeout {fail "(timeout) set breakpoint via convenience variable"}
-}
+
+gdb_test_no_output "set \$foo=$bp_location11" \
+ "set convenience variable \$foo to bp_location11"
+
+gdb_test "break \$foo" \
+ "Breakpoint (\[0-9\]*) at .*, line $bp_location11.*" \
+ "set breakpoint via convenience variable"
# Verify that GDB responds gracefully to an attempt to set a
# breakpoint via a convenience variable whose type is not integer.
#
-send_gdb "set \$foo=81.5\n"
-gdb_expect {
- -re "$gdb_prompt $"\
- {pass "set convenience variable \$foo to 81.5"}
- timeout {fail "(timeout) set convenience variable \$foo to 81.5"}
-}
-send_gdb "break \$foo\n"
-gdb_expect {
- -re "Convenience variables used in line specs must have integer values..*$gdb_prompt $"\
- {pass "set breakpoint via non-integer convenience variable disallowed"}
- -re "$gdb_prompt $"\
- {fail "set breakpoint via non-integer convenience variable disallowed"}
- timeout {fail "(timeout) set breakpoint via non-integer convenience variable disallowed"}
-}
+
+gdb_test_no_output "set \$foo=81.5" \
+ "set convenience variable \$foo to 81.5"
+
+gdb_test "break \$foo" \
+ "Convenience variables used in line specs must have integer values.*" \
+ "set breakpoint via non-integer convenience variable disallowed"
# Verify that we can set and trigger a breakpoint in a user-called function.
#
-send_gdb "break marker2\n"
-gdb_expect {
- -re "Breakpoint (\[0-9\]*) at .*, line ($bp_location8|$bp_location9).*$gdb_prompt $"\
- {pass "set breakpoint on to-be-called function"}
- -re "$gdb_prompt $"\
- {fail "set breakpoint on to-be-called function"}
- timeout {fail "(timeout) set breakpoint on to-be-called function"}
-}
-send_gdb "print marker2(99)\n"
-gdb_expect {
- -re "The program being debugged stopped while in a function called from GDB.\r\nEvaluation of the expression containing the function\r\n.marker2. will be abandoned.\r\nWhen the function is done executing, GDB will silently stop..*$gdb_prompt $"\
- {pass "hit breakpoint on called function"}
- -re "$gdb_prompt $"\
- {fail "hit breakpoint on called function"}
- timeout {fail "(timeout) hit breakpoint on called function"}
-}
+
+gdb_test "break marker2" \
+ "Breakpoint (\[0-9\]*) at .*, line ($bp_location8|$bp_location9).*" \
+ "set breakpoint on to-be-called function"
+
+gdb_test "print marker2(99)" \
+ "The program being debugged stopped while in a function called from GDB.\r\nEvaluation of the expression containing the function\r\n.marker2. will be abandoned.\r\nWhen the function is done executing, GDB will silently stop.*" \
+ "hit breakpoint on called function"
# As long as we're stopped (breakpointed) in a called function,
# verify that we can successfully backtrace & such from here.
# In this and the following test, the _sr4export check apparently is needed
# for hppa*-*-hpux.
#
-send_gdb "bt\n"
-gdb_expect {
- -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*_sr4export.*$gdb_prompt $"\
- {pass "backtrace while in called function"}
- -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*function called from gdb.*$gdb_prompt $"\
- {pass "backtrace while in called function"}
- -re "$gdb_prompt $"\
- {fail "backtrace while in called function"}
- timeout {fail "(timeout) backtrace while in called function"}
+
+gdb_test_multiple "bt" "backtrace while in called function" {
+ -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*_sr4export.*$gdb_prompt $" {
+ pass "backtrace while in called function"
+ }
+ -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*function called from gdb.*$gdb_prompt $" {
+ pass "backtrace while in called function"
+ }
}
# Return from the called function. For remote targets, it's important to do
# this before runto_main, which otherwise may silently stop on the dummy
# breakpoint inserted by GDB at the program's entry point.
#
-send_gdb "finish\n"
-gdb_expect {
- -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.* in _sr4export.*$gdb_prompt $"\
- {pass "finish from called function"}
- -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*function called from gdb.*$gdb_prompt $"\
- {pass "finish from called function"}
- -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*Value returned.*$gdb_prompt $"\
- {pass "finish from called function"}
- -re "$gdb_prompt $"\
- {fail "finish from called function"}
- timeout {fail "(timeout) finish from called function"}
+
+gdb_test_multiple "finish" "finish from called function" {
+ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.* in _sr4export.*$gdb_prompt $" {
+ pass "finish from called function"
+ }
+ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*function called from gdb.*$gdb_prompt $" {
+ pass "finish from called function"
+ }
+ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*Value returned.*$gdb_prompt $" {
+ pass "finish from called function"
+ }
}
# Verify that GDB responds gracefully to a "finish" command with
# arguments.
#
-if ![runto_main] then { fail "break tests suppressed" }
+if ![runto_main] then { fail "sepdebug tests suppressed" }
-send_gdb "finish 123\n"
-gdb_expect {
- -re "The \"finish\" command does not take any arguments.\r\n$gdb_prompt $"\
- {pass "finish with arguments disallowed"}
- -re "$gdb_prompt $"\
- {fail "finish with arguments disallowed"}
- timeout {fail "(timeout) finish with arguments disallowed"}
-}
+gdb_test "finish 123" \
+ "The \"finish\" command does not take any arguments.*" \
+ "finish with arguments disallowed"
# Verify that GDB responds gracefully to a request to "finish" from
# the outermost frame. On a stub that never exits, this will just
# second condition.
#
-send_gdb "finish\n"
-gdb_expect {
- -re "\"finish\" not meaningful in the outermost frame.\r\n$gdb_prompt $"\
- {pass "finish from outermost frame disallowed"}
- -re "Run till exit from.*\r\n$gdb_prompt $" {
- pass "finish from outermost frame disallowed"
- }
- -re "$gdb_prompt $"\
- {fail "finish from outermost frame disallowed"}
- timeout {fail "(timeout) finish from outermost frame disallowed"}
+gdb_test_multiple "finish" "finish from outermost frame disallowed" {
+ -re "\"finish\" not meaningful in the outermost frame.*$gdb_prompt $" {
+ pass "finish from outermost frame disallowed"
+ }
+ -re "Run till exit from.*$gdb_prompt $" {
+ pass "finish from outermost frame disallowed"
+ }
}
# Verify that we can explicitly ask GDB to stop on all shared library
# events, and that it does so.
#
if [istarget "hppa*-*-hpux*"] then {
- if ![runto_main] then { fail "break tests suppressed" }
-
- send_gdb "set stop-on-solib-events 1\n"
- gdb_expect {
- -re "$gdb_prompt $"\
- {pass "set stop-on-solib-events"}
- timeout {fail "(timeout) set stop-on-solib-events"}
- }
-
- send_gdb "run\n"
- gdb_expect {
- -re ".*Start it from the beginning.*y or n. $"\
- {send_gdb "y\n"
- gdb_expect {
- -re ".*Stopped due to shared library event.*$gdb_prompt $"\
- {pass "triggered stop-on-solib-events"}
- -re "$gdb_prompt $"\
- {fail "triggered stop-on-solib-events"}
- timeout {fail "(timeout) triggered stop-on-solib-events"}
- }
- }
- -re "$gdb_prompt $"\
- {fail "rerun for stop-on-solib-events"}
- timeout {fail "(timeout) rerun for stop-on-solib-events"}
- }
-
- send_gdb "set stop-on-solib-events 0\n"
- gdb_expect {
- -re "$gdb_prompt $"\
- {pass "reset stop-on-solib-events"}
- timeout {fail "(timeout) reset stop-on-solib-events"}
- }
+ if ![runto_main] then { fail "sepdebug tests suppressed" }
+
+ gdb_test_no_output "set stop-on-solib-events 1" \
+ "set stop-on-solib-events"
+
+ gdb_test "run" \
+ "Stopped due to shared library event.*" \
+ "triggered stop-on-solib-events" \
+ "Start it from the beginning.*y or n. $" \
+ "y"
+
+ gdb_test_no_output "set stop-on-solib-events 0" \
+ "reset stop-on-solib-events"
}
# Hardware breakpoints are unsupported on HP-UX. Verify that GDB
# gracefully responds to requests to create them.
#
if [istarget "hppa*-*-hpux*"] then {
- if ![runto_main] then { fail "break tests suppressed" }
-
- send_gdb "hbreak\n"
- gdb_expect {
- -re "No hardware breakpoint support in the target.*$gdb_prompt $"\
- {pass "hw breaks disallowed"}
- -re "$gdb_prompt $"\
- {fail "hw breaks disallowed"}
- timeout {fail "(timeout) hw breaks disallowed"}
- }
-
- send_gdb "thbreak\n"
- gdb_expect {
- -re "No hardware breakpoint support in the target.*$gdb_prompt $"\
- {pass "temporary hw breaks disallowed"}
- -re "$gdb_prompt $"\
- {fail "temporary hw breaks disallowed"}
- timeout {fail "(timeout) temporary hw breaks disallowed"}
- }
+ if ![runto_main] then { fail "sepdebug tests suppressed" }
+
+ gdb_test "hbreak" \
+ "No hardware breakpoint support in the target.*" \
+ "hw breaks disallowed"
+
+ gdb_test "thbreak" \
+ "No hardware breakpoint support in the target.*" \
+ "temporary hw breaks disallowed"
}
#********
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
- gdb_test "set debug-file-directory ${test_different_dir}" ".*" "set separate debug location"
+ gdb_test_no_output "set debug-file-directory ${test_different_dir}" \
+ "set separate debug location"
gdb_load ${binfile}
- if [target_info exists gdb_stub] {
- gdb_step_for_stub;
- }
-
#
# test break at function
#
set bp_location13 [gdb_get_line_number "set breakpoint 13 here"]
set bp_location14 [gdb_get_line_number "set breakpoint 14 here"]
- send_gdb "continue\n"
if {$xfail} {
setup_xfail "*-*-*"
}
- gdb_expect {
- -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
+
+ gdb_test_multiple "continue" "run until breakpoint set at small function, optimized file" {
+ -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*$gdb_prompt $" {
pass "run until breakpoint set at small function, optimized file"
}
- -re "Breakpoint $decimal, $hex in marker4 \\(d=177601976\\) at .*$srcfile:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
+ -re "Breakpoint $decimal, $hex in marker4 \\(d=177601976\\) at .*$srcfile:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*$gdb_prompt $" {
pass "run until breakpoint set at small function, optimized file"
}
- -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*" {
+ -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*$gdb_prompt $" {
# marker4() is defined at line 46 when compiled with -DPROTOTYPES
pass "run until breakpoint set at small function, optimized file (line bp_location14)"
}
- -re ".*$gdb_prompt " {
- fail "run until breakpoint set at small function, optimized file"
- }
- timeout {
- fail "run until breakpoint set at small function, optimized file (timeout)"
- }
}
if [istarget "*-*-vxworks*"] {
set timeout 10
verbose "Timeout is now $timeout seconds" 2
- send_gdb "set args main\n"
- gdb_expect -re ".*$gdb_prompt $" {}
+ gdb_test_no_output "set args main"
}
set pf_prefix $old_pf_prefix
# now move the .debug file to a different location so that we can test
# the "set debug-file-directory" command.
-
-remote_exec build "mv ${objdir}/${subdir}/.debug/${testfile}.debug ${objdir}/${subdir}"
-set debugfile "${objdir}/${subdir}/${testfile}.debug"
-test_different_dir debuglink "${objdir}/${subdir}" 0
+set different_dir "${objdir}/${subdir}/${testfile}.dir"
+set debugfile "${different_dir}/${objdir}/${subdir}/${testfile}.debug"
+remote_exec build "rm -rf $different_dir"
+remote_exec build "mkdir -p [file dirname $debugfile]"
+remote_exec build "mv -f ${objdir}/${subdir}/${testfile}.debug $debugfile"
+
+test_different_dir debuglink $different_dir 0
# Test CRC mismatch is reported.
if {[build_executable sepdebug.exp sepdebug2 sepdebug2.c debug] != -1
&& ![gdb_gnu_strip_debug ${objdir}/${subdir}/sepdebug2]} {
- remote_exec build "cp ${debugfile} ${objdir}/${subdir}/.debug/sepdebug2.debug"
+ remote_exec build "cp ${debugfile} ${objdir}/${subdir}/sepdebug2.debug"
gdb_exit
gdb_start
set escapedobjdirsubdir [string_to_regexp ${objdir}/${subdir}]
- gdb_test "file ${objdir}/${subdir}/sepdebug2" "warning: the debug information found in \"${escapedobjdirsubdir}/\\.debug/sepdebug2\\.debug\" does not match \"${escapedobjdirsubdir}/sepdebug2\" \\(CRC mismatch\\)\\..*\\(no debugging symbols found\\).*" "CRC mismatch is reported"
+ gdb_test "file ${objdir}/${subdir}/sepdebug2" "warning: the debug information found in \"${escapedobjdirsubdir}/sepdebug2\\.debug\" does not match \"${escapedobjdirsubdir}/sepdebug2\" \\(CRC mismatch\\)\\..*\\(no debugging symbols found\\).*" "CRC mismatch is reported"
}
OSDN Git Service
