/* General utility routines for GDB, the GNU debugger.
- Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
- 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
+ Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
+ 2009, 2010 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "gdb_assert.h"
#include "gdb_string.h"
#include "event-top.h"
#include "exceptions.h"
+#include "gdbthread.h"
#ifdef TUI
#include "tui/tui.h" /* For tui_get_command_dimension. */
#include "filenames.h"
#include "symfile.h"
#include "gdb_obstack.h"
+#include "gdbcore.h"
+#include "top.h"
#include "inferior.h" /* for signed_pointer_to_address */
#include "readline/readline.h"
+#include <sys/time.h>
+#include <time.h>
+
+#include "gdb_usleep.h"
+
#if !HAVE_DECL_MALLOC
-extern PTR malloc (); /* OK: PTR */
+extern PTR malloc (); /* ARI: PTR */
#endif
#if !HAVE_DECL_REALLOC
-extern PTR realloc (); /* OK: PTR */
+extern PTR realloc (); /* ARI: PTR */
#endif
#if !HAVE_DECL_FREE
extern void free ();
static void set_screen_size (void);
static void set_width (void);
+/* A flag indicating whether to timestamp debugging messages. */
+
+static int debug_timestamp = 0;
+
/* Chain of cleanup actions established with make_cleanup,
to be executed if an error happens. */
static struct cleanup *cleanup_chain; /* cleaned up after a failed command */
static struct cleanup *final_cleanup_chain; /* cleaned up when gdb exits */
-static struct cleanup *run_cleanup_chain; /* cleaned up on each 'run' */
-static struct cleanup *exec_cleanup_chain; /* cleaned up on each execution command */
-/* cleaned up on each error from within an execution command */
-static struct cleanup *exec_error_cleanup_chain;
-
-/* Pointer to what is left to do for an execution command after the
- target stops. Used only in asynchronous mode, by targets that
- support async execution. The finish and until commands use it. So
- does the target extended-remote command. */
-struct continuation *cmd_continuation;
-struct continuation *intermediate_continuation;
/* Nonzero if we have job control. */
}
struct cleanup *
-make_final_cleanup (make_cleanup_ftype *function, void *arg)
-{
- return make_my_cleanup (&final_cleanup_chain, function, arg);
-}
-
-struct cleanup *
-make_run_cleanup (make_cleanup_ftype *function, void *arg)
-{
- return make_my_cleanup (&run_cleanup_chain, function, arg);
-}
-
-struct cleanup *
-make_exec_cleanup (make_cleanup_ftype *function, void *arg)
+make_cleanup_dtor (make_cleanup_ftype *function, void *arg,
+ void (*dtor) (void *))
{
- return make_my_cleanup (&exec_cleanup_chain, function, arg);
+ return make_my_cleanup2 (&cleanup_chain,
+ function, arg, dtor);
}
struct cleanup *
-make_exec_error_cleanup (make_cleanup_ftype *function, void *arg)
+make_final_cleanup (make_cleanup_ftype *function, void *arg)
{
- return make_my_cleanup (&exec_error_cleanup_chain, function, arg);
+ return make_my_cleanup (&final_cleanup_chain, function, arg);
}
static void
{
int *fd = arg;
close (*fd);
- xfree (fd);
}
struct cleanup *
{
int *saved_fd = xmalloc (sizeof (fd));
*saved_fd = fd;
- return make_cleanup (do_close_cleanup, saved_fd);
+ return make_cleanup_dtor (do_close_cleanup, saved_fd, xfree);
+}
+
+/* Helper function which does the work for make_cleanup_fclose. */
+
+static void
+do_fclose_cleanup (void *arg)
+{
+ FILE *file = arg;
+ fclose (arg);
+}
+
+/* Return a new cleanup that closes FILE. */
+
+struct cleanup *
+make_cleanup_fclose (FILE *file)
+{
+ return make_cleanup (do_fclose_cleanup, file);
+}
+
+/* Helper function which does the work for make_cleanup_obstack_free. */
+
+static void
+do_obstack_free (void *arg)
+{
+ struct obstack *ob = arg;
+ obstack_free (ob, NULL);
+}
+
+/* Return a new cleanup that frees OBSTACK. */
+
+struct cleanup *
+make_cleanup_obstack_free (struct obstack *obstack)
+{
+ return make_cleanup (do_obstack_free, obstack);
}
static void
return make_my_cleanup (&cleanup_chain, do_free_section_addr_info, addrs);
}
+struct restore_integer_closure
+{
+ int *variable;
+ int value;
+};
+
+static void
+restore_integer (void *p)
+{
+ struct restore_integer_closure *closure = p;
+ *(closure->variable) = closure->value;
+}
+
+/* Remember the current value of *VARIABLE and make it restored when the cleanup
+ is run. */
+struct cleanup *
+make_cleanup_restore_integer (int *variable)
+{
+ struct restore_integer_closure *c =
+ xmalloc (sizeof (struct restore_integer_closure));
+ c->variable = variable;
+ c->value = *variable;
+
+ return make_my_cleanup2 (&cleanup_chain, restore_integer, (void *)c,
+ xfree);
+}
struct cleanup *
-make_my_cleanup (struct cleanup **pmy_chain, make_cleanup_ftype *function,
- void *arg)
+make_my_cleanup2 (struct cleanup **pmy_chain, make_cleanup_ftype *function,
+ void *arg, void (*free_arg) (void *))
{
struct cleanup *new
= (struct cleanup *) xmalloc (sizeof (struct cleanup));
new->next = *pmy_chain;
new->function = function;
+ new->free_arg = free_arg;
new->arg = arg;
*pmy_chain = new;
return old_chain;
}
+struct cleanup *
+make_my_cleanup (struct cleanup **pmy_chain, make_cleanup_ftype *function,
+ void *arg)
+{
+ return make_my_cleanup2 (pmy_chain, function, arg, NULL);
+}
+
/* Discard cleanups and do the actions they describe
until we get back to the point OLD_CHAIN in the cleanup_chain. */
do_my_cleanups (&final_cleanup_chain, old_chain);
}
-void
-do_run_cleanups (struct cleanup *old_chain)
-{
- do_my_cleanups (&run_cleanup_chain, old_chain);
-}
-
-void
-do_exec_cleanups (struct cleanup *old_chain)
-{
- do_my_cleanups (&exec_cleanup_chain, old_chain);
-}
-
-void
-do_exec_error_cleanups (struct cleanup *old_chain)
-{
- do_my_cleanups (&exec_error_cleanup_chain, old_chain);
-}
-
static void
do_my_cleanups (struct cleanup **pmy_chain,
struct cleanup *old_chain)
{
*pmy_chain = ptr->next; /* Do this first incase recursion */
(*ptr->function) (ptr->arg);
+ if (ptr->free_arg)
+ (*ptr->free_arg) (ptr->arg);
xfree (ptr);
}
}
}
void
-discard_exec_error_cleanups (struct cleanup *old_chain)
-{
- discard_my_cleanups (&exec_error_cleanup_chain, old_chain);
-}
-
-void
discard_my_cleanups (struct cleanup **pmy_chain,
struct cleanup *old_chain)
{
while ((ptr = *pmy_chain) != old_chain)
{
*pmy_chain = ptr->next;
+ if (ptr->free_arg)
+ (*ptr->free_arg) (ptr->arg);
xfree (ptr);
}
}
{
}
-/* Add a continuation to the continuation list, the global list
- cmd_continuation. The new continuation will be added at the front.*/
+/* Continuations are implemented as cleanups internally. Inherit from
+ cleanups. */
+struct continuation
+{
+ struct cleanup base;
+};
+
+/* Add a continuation to the continuation list of THREAD. The new
+ continuation will be added at the front. */
void
-add_continuation (void (*continuation_hook) (struct continuation_arg *),
- struct continuation_arg *arg_list)
+add_continuation (struct thread_info *thread,
+ void (*continuation_hook) (void *), void *args,
+ void (*continuation_free_args) (void *))
{
- struct continuation *continuation_ptr;
+ struct cleanup *as_cleanup = &thread->continuations->base;
+ make_cleanup_ftype *continuation_hook_fn = continuation_hook;
- continuation_ptr =
- (struct continuation *) xmalloc (sizeof (struct continuation));
- continuation_ptr->continuation_hook = continuation_hook;
- continuation_ptr->arg_list = arg_list;
- continuation_ptr->next = cmd_continuation;
- cmd_continuation = continuation_ptr;
+ make_my_cleanup2 (&as_cleanup,
+ continuation_hook_fn,
+ args,
+ continuation_free_args);
+
+ thread->continuations = (struct continuation *) as_cleanup;
}
-/* Walk down the cmd_continuation list, and execute all the
- continuations. There is a problem though. In some cases new
- continuations may be added while we are in the middle of this
- loop. If this happens they will be added in the front, and done
- before we have a chance of exhausting those that were already
- there. We need to then save the beginning of the list in a pointer
- and do the continuations from there on, instead of using the
- global beginning of list as our iteration pointer. */
+/* Add a continuation to the continuation list of INFERIOR. The new
+ continuation will be added at the front. */
+
void
-do_all_continuations (void)
+add_inferior_continuation (void (*continuation_hook) (void *), void *args,
+ void (*continuation_free_args) (void *))
{
- struct continuation *continuation_ptr;
- struct continuation *saved_continuation;
+ struct inferior *inf = current_inferior ();
+ struct cleanup *as_cleanup = &inf->continuations->base;
+ make_cleanup_ftype *continuation_hook_fn = continuation_hook;
+
+ make_my_cleanup2 (&as_cleanup,
+ continuation_hook_fn,
+ args,
+ continuation_free_args);
+
+ inf->continuations = (struct continuation *) as_cleanup;
+}
+
+/* Do all continuations of the current inferior. */
+
+void
+do_all_inferior_continuations (void)
+{
+ struct cleanup *old_chain;
+ struct cleanup *as_cleanup;
+ struct inferior *inf = current_inferior ();
+
+ if (inf->continuations == NULL)
+ return;
/* Copy the list header into another pointer, and set the global
list header to null, so that the global list can change as a side
- effect of invoking the continuations and the processing of
- the preexisting continuations will not be affected. */
- continuation_ptr = cmd_continuation;
- cmd_continuation = NULL;
+ effect of invoking the continuations and the processing of the
+ preexisting continuations will not be affected. */
+
+ as_cleanup = &inf->continuations->base;
+ inf->continuations = NULL;
/* Work now on the list we have set aside. */
- while (continuation_ptr)
- {
- (continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
- saved_continuation = continuation_ptr;
- continuation_ptr = continuation_ptr->next;
- xfree (saved_continuation);
- }
+ do_my_cleanups (&as_cleanup, NULL);
}
-/* Walk down the cmd_continuation list, and get rid of all the
- continuations. */
+/* Get rid of all the inferior-wide continuations of INF. */
+
void
-discard_all_continuations (void)
+discard_all_inferior_continuations (struct inferior *inf)
{
- struct continuation *continuation_ptr;
+ struct cleanup *continuation_ptr = &inf->continuations->base;
+ discard_my_cleanups (&continuation_ptr, NULL);
+ inf->continuations = NULL;
+}
- while (cmd_continuation)
- {
- continuation_ptr = cmd_continuation;
- cmd_continuation = continuation_ptr->next;
- xfree (continuation_ptr);
- }
+static void
+restore_thread_cleanup (void *arg)
+{
+ ptid_t *ptid_p = arg;
+ switch_to_thread (*ptid_p);
}
-/* Add a continuation to the continuation list, the global list
- intermediate_continuation. The new continuation will be added at
- the front. */
+/* Walk down the continuation list of PTID, and execute all the
+ continuations. There is a problem though. In some cases new
+ continuations may be added while we are in the middle of this loop.
+ If this happens they will be added in the front, and done before we
+ have a chance of exhausting those that were already there. We need
+ to then save the beginning of the list in a pointer and do the
+ continuations from there on, instead of using the global beginning
+ of list as our iteration pointer. */
+static void
+do_all_continuations_ptid (ptid_t ptid,
+ struct continuation **continuations_p)
+{
+ struct cleanup *old_chain;
+ ptid_t current_thread;
+ struct cleanup *as_cleanup;
+
+ if (*continuations_p == NULL)
+ return;
+
+ current_thread = inferior_ptid;
+
+ /* Restore selected thread on exit. Don't try to restore the frame
+ as well, because:
+
+ - When running continuations, the selected frame is always #0.
+
+ - The continuations may trigger symbol file loads, which may
+ change the frame layout (frame ids change), which would trigger
+ a warning if we used make_cleanup_restore_current_thread. */
+
+ old_chain = make_cleanup (restore_thread_cleanup, ¤t_thread);
+
+ /* Let the continuation see this thread as selected. */
+ switch_to_thread (ptid);
+
+ /* Copy the list header into another pointer, and set the global
+ list header to null, so that the global list can change as a side
+ effect of invoking the continuations and the processing of the
+ preexisting continuations will not be affected. */
+
+ as_cleanup = &(*continuations_p)->base;
+ *continuations_p = NULL;
+
+ /* Work now on the list we have set aside. */
+ do_my_cleanups (&as_cleanup, NULL);
+
+ do_cleanups (old_chain);
+}
+
+/* Callback for iterate over threads. */
+static int
+do_all_continuations_thread_callback (struct thread_info *thread, void *data)
+{
+ do_all_continuations_ptid (thread->ptid, &thread->continuations);
+ return 0;
+}
+
+/* Do all continuations of thread THREAD. */
+void
+do_all_continuations_thread (struct thread_info *thread)
+{
+ do_all_continuations_thread_callback (thread, NULL);
+}
+
+/* Do all continuations of all threads. */
+void
+do_all_continuations (void)
+{
+ iterate_over_threads (do_all_continuations_thread_callback, NULL);
+}
+
+/* Callback for iterate over threads. */
+static int
+discard_all_continuations_thread_callback (struct thread_info *thread,
+ void *data)
+{
+ struct cleanup *continuation_ptr = &thread->continuations->base;
+ discard_my_cleanups (&continuation_ptr, NULL);
+ thread->continuations = NULL;
+ return 0;
+}
+
+/* Get rid of all the continuations of THREAD. */
+void
+discard_all_continuations_thread (struct thread_info *thread)
+{
+ discard_all_continuations_thread_callback (thread, NULL);
+}
+
+/* Get rid of all the continuations of all threads. */
+void
+discard_all_continuations (void)
+{
+ iterate_over_threads (discard_all_continuations_thread_callback, NULL);
+}
+
+
+/* Add a continuation to the intermediate continuation list of THREAD.
+ The new continuation will be added at the front. */
void
-add_intermediate_continuation (void (*continuation_hook)
- (struct continuation_arg *),
- struct continuation_arg *arg_list)
+add_intermediate_continuation (struct thread_info *thread,
+ void (*continuation_hook)
+ (void *), void *args,
+ void (*continuation_free_args) (void *))
{
- struct continuation *continuation_ptr;
+ struct cleanup *as_cleanup = &thread->intermediate_continuations->base;
+ make_cleanup_ftype *continuation_hook_fn = continuation_hook;
- continuation_ptr =
- (struct continuation *) xmalloc (sizeof (struct continuation));
- continuation_ptr->continuation_hook = continuation_hook;
- continuation_ptr->arg_list = arg_list;
- continuation_ptr->next = intermediate_continuation;
- intermediate_continuation = continuation_ptr;
+ make_my_cleanup2 (&as_cleanup,
+ continuation_hook_fn,
+ args,
+ continuation_free_args);
+
+ thread->intermediate_continuations = (struct continuation *) as_cleanup;
}
/* Walk down the cmd_continuation list, and execute all the
there. We need to then save the beginning of the list in a pointer
and do the continuations from there on, instead of using the
global beginning of list as our iteration pointer.*/
+static int
+do_all_intermediate_continuations_thread_callback (struct thread_info *thread,
+ void *data)
+{
+ do_all_continuations_ptid (thread->ptid,
+ &thread->intermediate_continuations);
+ return 0;
+}
+
+/* Do all intermediate continuations of thread THREAD. */
+void
+do_all_intermediate_continuations_thread (struct thread_info *thread)
+{
+ do_all_intermediate_continuations_thread_callback (thread, NULL);
+}
+
+/* Do all intermediate continuations of all threads. */
void
do_all_intermediate_continuations (void)
{
- struct continuation *continuation_ptr;
- struct continuation *saved_continuation;
+ iterate_over_threads (do_all_intermediate_continuations_thread_callback, NULL);
+}
- /* Copy the list header into another pointer, and set the global
- list header to null, so that the global list can change as a side
- effect of invoking the continuations and the processing of
- the preexisting continuations will not be affected. */
- continuation_ptr = intermediate_continuation;
- intermediate_continuation = NULL;
+/* Callback for iterate over threads. */
+static int
+discard_all_intermediate_continuations_thread_callback (struct thread_info *thread,
+ void *data)
+{
+ struct cleanup *continuation_ptr = &thread->intermediate_continuations->base;
+ discard_my_cleanups (&continuation_ptr, NULL);
+ thread->intermediate_continuations = NULL;
+ return 0;
+}
- /* Work now on the list we have set aside. */
- while (continuation_ptr)
- {
- (continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
- saved_continuation = continuation_ptr;
- continuation_ptr = continuation_ptr->next;
- xfree (saved_continuation);
- }
+/* Get rid of all the intermediate continuations of THREAD. */
+void
+discard_all_intermediate_continuations_thread (struct thread_info *thread)
+{
+ discard_all_intermediate_continuations_thread_callback (thread, NULL);
}
-/* Walk down the cmd_continuation list, and get rid of all the
- continuations. */
+/* Get rid of all the intermediate continuations of all threads. */
void
discard_all_intermediate_continuations (void)
{
- struct continuation *continuation_ptr;
-
- while (intermediate_continuation)
- {
- continuation_ptr = intermediate_continuation;
- intermediate_continuation = continuation_ptr->next;
- xfree (continuation_ptr);
- }
+ iterate_over_threads (discard_all_intermediate_continuations_thread_callback, NULL);
}
\f
NORETURN void
error_stream (struct ui_file *stream)
{
- long len;
- char *message = ui_file_xstrdup (stream, &len);
+ char *message = ui_file_xstrdup (stream, NULL);
make_cleanup (xfree, message);
error (("%s"), message);
}
+/* Allow the user to configure the debugger behavior with respect to
+ what to do when an internal problem is detected. */
+
+const char internal_problem_ask[] = "ask";
+const char internal_problem_yes[] = "yes";
+const char internal_problem_no[] = "no";
+static const char *internal_problem_modes[] =
+{
+ internal_problem_ask,
+ internal_problem_yes,
+ internal_problem_no,
+ NULL
+};
+static const char *internal_problem_mode = internal_problem_ask;
+
/* Print a message reporting an internal error/warning. Ask the user
if they want to continue, dump core, or just exit. Return
something to indicate a quit. */
struct internal_problem
{
const char *name;
- /* FIXME: cagney/2002-08-15: There should be ``maint set/show''
- commands available for controlling these variables. */
- enum auto_boolean should_quit;
- enum auto_boolean should_dump_core;
+ const char *should_quit;
+ const char *should_dump_core;
};
/* Report a problem, internal to GDB, to the user. Once the problem
case 1:
dejavu = 2;
fputs_unfiltered (msg, gdb_stderr);
- abort (); /* NOTE: GDB has only three calls to abort(). */
+ abort (); /* NOTE: GDB has only four calls to abort(). */
default:
dejavu = 3;
- write (STDERR_FILENO, msg, sizeof (msg));
+ /* Newer GLIBC versions put the warn_unused_result attribute
+ on write, but this is one of those rare cases where
+ ignoring the return value is correct. Casting to (void)
+ does not fix this problem. This is the solution suggested
+ at http://gcc.gnu.org/bugzilla/show_bug.cgi?id=25509. */
+ if (write (STDERR_FILENO, msg, sizeof (msg)) != sizeof (msg))
+ abort (); /* NOTE: GDB has only four calls to abort(). */
exit (1);
}
}
make_cleanup (xfree, reason);
}
- switch (problem->should_quit)
+ if (problem->should_quit == internal_problem_ask)
{
- case AUTO_BOOLEAN_AUTO:
/* Default (yes/batch case) is to quit GDB. When in batch mode
- this lessens the likelhood of GDB going into an infinate
- loop. */
- quit_p = query (_("%s\nQuit this debugging session? "), reason);
- break;
- case AUTO_BOOLEAN_TRUE:
- quit_p = 1;
- break;
- case AUTO_BOOLEAN_FALSE:
- quit_p = 0;
- break;
- default:
- internal_error (__FILE__, __LINE__, _("bad switch"));
+ this lessens the likelihood of GDB going into an infinite
+ loop. */
+ if (caution == 0)
+ {
+ /* Emit the message and quit. */
+ fputs_unfiltered (reason, gdb_stderr);
+ fputs_unfiltered ("\n", gdb_stderr);
+ quit_p = 1;
+ }
+ else
+ quit_p = query (_("%s\nQuit this debugging session? "), reason);
}
+ else if (problem->should_quit == internal_problem_yes)
+ quit_p = 1;
+ else if (problem->should_quit == internal_problem_no)
+ quit_p = 0;
+ else
+ internal_error (__FILE__, __LINE__, _("bad switch"));
- switch (problem->should_dump_core)
+ if (problem->should_dump_core == internal_problem_ask)
{
- case AUTO_BOOLEAN_AUTO:
/* Default (yes/batch case) is to dump core. This leaves a GDB
`dropping' so that it is easier to see that something went
wrong in GDB. */
dump_core_p = query (_("%s\nCreate a core file of GDB? "), reason);
- break;
- break;
- case AUTO_BOOLEAN_TRUE:
- dump_core_p = 1;
- break;
- case AUTO_BOOLEAN_FALSE:
- dump_core_p = 0;
- break;
- default:
- internal_error (__FILE__, __LINE__, _("bad switch"));
}
+ else if (problem->should_dump_core == internal_problem_yes)
+ dump_core_p = 1;
+ else if (problem->should_dump_core == internal_problem_no)
+ dump_core_p = 0;
+ else
+ internal_error (__FILE__, __LINE__, _("bad switch"));
if (quit_p)
{
if (dump_core_p)
- abort (); /* NOTE: GDB has only three calls to abort(). */
+ abort (); /* NOTE: GDB has only four calls to abort(). */
else
exit (1);
}
{
#ifdef HAVE_WORKING_FORK
if (fork () == 0)
- abort (); /* NOTE: GDB has only three calls to abort(). */
+ abort (); /* NOTE: GDB has only four calls to abort(). */
#endif
}
}
}
static struct internal_problem internal_error_problem = {
- "internal-error", AUTO_BOOLEAN_AUTO, AUTO_BOOLEAN_AUTO
+ "internal-error", internal_problem_ask, internal_problem_ask
};
NORETURN void
}
static struct internal_problem internal_warning_problem = {
- "internal-warning", AUTO_BOOLEAN_AUTO, AUTO_BOOLEAN_AUTO
+ "internal-warning", internal_problem_ask, internal_problem_ask
};
void
va_end (ap);
}
+/* Dummy functions to keep add_prefix_cmd happy. */
+
+static void
+set_internal_problem_cmd (char *args, int from_tty)
+{
+}
+
+static void
+show_internal_problem_cmd (char *args, int from_tty)
+{
+}
+
+/* When GDB reports an internal problem (error or warning) it gives
+ the user the opportunity to quit GDB and/or create a core file of
+ the current debug session. This function registers a few commands
+ that make it possible to specify that GDB should always or never
+ quit or create a core file, without asking. The commands look
+ like:
+
+ maint set PROBLEM-NAME quit ask|yes|no
+ maint show PROBLEM-NAME quit
+ maint set PROBLEM-NAME corefile ask|yes|no
+ maint show PROBLEM-NAME corefile
+
+ Where PROBLEM-NAME is currently "internal-error" or
+ "internal-warning". */
+
+static void
+add_internal_problem_command (struct internal_problem *problem)
+{
+ struct cmd_list_element **set_cmd_list;
+ struct cmd_list_element **show_cmd_list;
+ char *set_doc;
+ char *show_doc;
+
+ set_cmd_list = xmalloc (sizeof (*set_cmd_list));
+ show_cmd_list = xmalloc (sizeof (*set_cmd_list));
+ *set_cmd_list = NULL;
+ *show_cmd_list = NULL;
+
+ set_doc = xstrprintf (_("Configure what GDB does when %s is detected."),
+ problem->name);
+
+ show_doc = xstrprintf (_("Show what GDB does when %s is detected."),
+ problem->name);
+
+ add_prefix_cmd ((char*) problem->name,
+ class_maintenance, set_internal_problem_cmd, set_doc,
+ set_cmd_list,
+ concat ("maintenance set ", problem->name, " ", NULL),
+ 0/*allow-unknown*/, &maintenance_set_cmdlist);
+
+ add_prefix_cmd ((char*) problem->name,
+ class_maintenance, show_internal_problem_cmd, show_doc,
+ show_cmd_list,
+ concat ("maintenance show ", problem->name, " ", NULL),
+ 0/*allow-unknown*/, &maintenance_show_cmdlist);
+
+ set_doc = xstrprintf (_("\
+Set whether GDB should quit when an %s is detected"),
+ problem->name);
+ show_doc = xstrprintf (_("\
+Show whether GDB will quit when an %s is detected"),
+ problem->name);
+ add_setshow_enum_cmd ("quit", class_maintenance,
+ internal_problem_modes,
+ &problem->should_quit,
+ set_doc,
+ show_doc,
+ NULL, /* help_doc */
+ NULL, /* setfunc */
+ NULL, /* showfunc */
+ set_cmd_list,
+ show_cmd_list);
+
+ xfree (set_doc);
+ xfree (show_doc);
+
+ set_doc = xstrprintf (_("\
+Set whether GDB should create a core file of GDB when %s is detected"),
+ problem->name);
+ show_doc = xstrprintf (_("\
+Show whether GDB will create a core file of GDB when %s is detected"),
+ problem->name);
+ add_setshow_enum_cmd ("corefile", class_maintenance,
+ internal_problem_modes,
+ &problem->should_dump_core,
+ set_doc,
+ show_doc,
+ NULL, /* help_doc */
+ NULL, /* setfunc */
+ NULL, /* showfunc */
+ set_cmd_list,
+ show_cmd_list);
+
+ xfree (set_doc);
+ xfree (show_doc);
+}
+
/* Print the system error message for errno, and also mention STRING
as the file name for which the error was encountered.
Then return to command level. */
#endif
}
-/* Control C comes here */
-void
-request_quit (int signo)
-{
- quit_flag = 1;
- /* Restore the signal handler. Harmless with BSD-style signals,
- needed for System V-style signals. */
- signal (signo, request_quit);
-
- if (immediate_quit)
- quit ();
-}
\f
/* Called when a memory allocation fails, with the number of bytes of
memory requested in SIZE. */
/* NOTE: These are declared using PTR to ensure consistency with
"libiberty.h". xfree() is GDB local. */
-PTR /* OK: PTR */
+PTR /* ARI: PTR */
xmalloc (size_t size)
{
void *val;
if (size == 0)
size = 1;
- val = malloc (size); /* OK: malloc */
+ val = malloc (size); /* ARI: malloc */
if (val == NULL)
nomem (size);
return xcalloc (1, size);
}
-PTR /* OK: PTR */
-xrealloc (PTR ptr, size_t size) /* OK: PTR */
+PTR /* ARI: PTR */
+xrealloc (PTR ptr, size_t size) /* ARI: PTR */
{
void *val;
size = 1;
if (ptr != NULL)
- val = realloc (ptr, size); /* OK: realloc */
+ val = realloc (ptr, size); /* ARI: realloc */
else
- val = malloc (size); /* OK: malloc */
+ val = malloc (size); /* ARI: malloc */
if (val == NULL)
nomem (size);
return (val);
}
-PTR /* OK: PTR */
+PTR /* ARI: PTR */
xcalloc (size_t number, size_t size)
{
void *mem;
size = 1;
}
- mem = calloc (number, size); /* OK: xcalloc */
+ mem = calloc (number, size); /* ARI: xcalloc */
if (mem == NULL)
nomem (number * size);
xfree (void *ptr)
{
if (ptr != NULL)
- free (ptr); /* OK: free */
+ free (ptr); /* ARI: free */
}
\f
void
gdb_print_host_address (const void *addr, struct ui_file *stream)
{
-
- /* We could use the %p conversion specifier to fprintf if we had any
- way of knowing whether this host supports it. But the following
- should work on the Alpha and on 32 bit machines. */
-
- fprintf_filtered (stream, "0x%lx", (unsigned long) addr);
-}
-
-/* Ask user a y-or-n question and return 1 iff answer is yes.
- Takes three args which are given to printf to print the question.
- The first, a control string, should end in "? ".
- It should not say how to answer, because we do that. */
-
-/* VARARGS */
-int
-query (const char *ctlstr, ...)
-{
- va_list args;
- int answer;
- int ans2;
- int retval;
-
- if (deprecated_query_hook)
- {
- va_start (args, ctlstr);
- return deprecated_query_hook (ctlstr, args);
- }
-
- /* Automatically answer "yes" if input is not from a terminal. */
- if (!input_from_terminal_p ())
- return 1;
-
- while (1)
- {
- wrap_here (""); /* Flush any buffered output */
- gdb_flush (gdb_stdout);
-
- if (annotation_level > 1)
- printf_filtered (("\n\032\032pre-query\n"));
-
- va_start (args, ctlstr);
- vfprintf_filtered (gdb_stdout, ctlstr, args);
- va_end (args);
- printf_filtered (_("(y or n) "));
-
- if (annotation_level > 1)
- printf_filtered (("\n\032\032query\n"));
-
- wrap_here ("");
- gdb_flush (gdb_stdout);
-
- answer = fgetc (stdin);
- clearerr (stdin); /* in case of C-d */
- if (answer == EOF) /* C-d */
- {
- retval = 1;
- break;
- }
- /* Eat rest of input line, to EOF or newline */
- if (answer != '\n')
- do
- {
- ans2 = fgetc (stdin);
- clearerr (stdin);
- }
- while (ans2 != EOF && ans2 != '\n' && ans2 != '\r');
-
- if (answer >= 'a')
- answer -= 040;
- if (answer == 'Y')
- {
- retval = 1;
- break;
- }
- if (answer == 'N')
- {
- retval = 0;
- break;
- }
- printf_filtered (_("Please answer y or n.\n"));
- }
-
- if (annotation_level > 1)
- printf_filtered (("\n\032\032post-query\n"));
- return retval;
+ fprintf_filtered (stream, "%s", host_address_to_string (addr));
}
\f
-/* This function supports the nquery() and yquery() functions.
+/* This function supports the query, nquery, and yquery functions.
Ask user a y-or-n question and return 0 if answer is no, 1 if
- answer is yes, or default the answer to the specified default.
- DEFCHAR is either 'y' or 'n' and refers to the default answer.
+ answer is yes, or default the answer to the specified default
+ (for yquery or nquery). DEFCHAR may be 'y' or 'n' to provide a
+ default answer, or '\0' for no default.
CTLSTR is the control string and should end in "? ". It should
not say how to answer, because we do that.
ARGS are the arguments passed along with the CTLSTR argument to
int retval;
int def_value;
char def_answer, not_def_answer;
- char *y_string, *n_string;
+ char *y_string, *n_string, *question;
/* Set up according to which answer is the default. */
- if (defchar == 'y')
+ if (defchar == '\0')
+ {
+ def_value = 1;
+ def_answer = 'Y';
+ not_def_answer = 'N';
+ y_string = "y";
+ n_string = "n";
+ }
+ else if (defchar == 'y')
{
def_value = 1;
def_answer = 'Y';
n_string = "[n]";
}
+ /* Automatically answer the default value if the user did not want
+ prompts or the command was issued with the server prefix. */
+ if (! caution || server_command)
+ return def_value;
+
+ /* If input isn't coming from the user directly, just say what
+ question we're asking, and then answer the default automatically. This
+ way, important error messages don't get lost when talking to GDB
+ over a pipe. */
+ if (! input_from_terminal_p ())
+ {
+ wrap_here ("");
+ vfprintf_filtered (gdb_stdout, ctlstr, args);
+
+ printf_filtered (_("(%s or %s) [answered %c; input not from terminal]\n"),
+ y_string, n_string, def_answer);
+ gdb_flush (gdb_stdout);
+
+ return def_value;
+ }
+
if (deprecated_query_hook)
{
return deprecated_query_hook (ctlstr, args);
}
- /* Automatically answer default value if input is not from a terminal. */
- if (!input_from_terminal_p ())
- return def_value;
+ /* Format the question outside of the loop, to avoid reusing args. */
+ question = xstrvprintf (ctlstr, args);
while (1)
{
if (annotation_level > 1)
printf_filtered (("\n\032\032pre-query\n"));
- vfprintf_filtered (gdb_stdout, ctlstr, args);
+ fputs_filtered (question, gdb_stdout);
printf_filtered (_("(%s or %s) "), y_string, n_string);
if (annotation_level > 1)
gdb_flush (gdb_stdout);
answer = fgetc (stdin);
+
+ /* We expect fgetc to block until a character is read. But
+ this may not be the case if the terminal was opened with
+ the NONBLOCK flag. In that case, if there is nothing to
+ read on stdin, fgetc returns EOF, but also sets the error
+ condition flag on stdin and errno to EAGAIN. With a true
+ EOF, stdin's error condition flag is not set.
+
+ A situation where this behavior was observed is a pseudo
+ terminal on AIX. */
+ while (answer == EOF && ferror (stdin) && errno == EAGAIN)
+ {
+ /* Not a real EOF. Wait a little while and try again until
+ we read something. */
+ clearerr (stdin);
+ gdb_usleep (10000);
+ answer = fgetc (stdin);
+ }
+
clearerr (stdin); /* in case of C-d */
if (answer == EOF) /* C-d */
{
+ printf_filtered ("EOF [assumed %c]\n", def_answer);
retval = def_value;
break;
}
retval = !def_value;
break;
}
- /* Otherwise, for the default, the user may either specify
- the required input or have it default by entering nothing. */
- if (answer == def_answer || answer == '\n' ||
- answer == '\r' || answer == EOF)
+ /* Otherwise, if a default was specified, the user may either
+ specify the required input or have it default by entering
+ nothing. */
+ if (answer == def_answer
+ || (defchar != '\0' &&
+ (answer == '\n' || answer == '\r' || answer == EOF)))
{
retval = def_value;
break;
y_string, n_string);
}
+ xfree (question);
if (annotation_level > 1)
printf_filtered (("\n\032\032post-query\n"));
return retval;
va_end (args);
}
-/* Print an error message saying that we couldn't make sense of a
- \^mumble sequence in a string or character constant. START and END
- indicate a substring of some larger string that contains the
- erroneous backslash sequence, missing the initial backslash. */
-static NORETURN int
-no_control_char_error (const char *start, const char *end)
+/* Ask user a y-or-n question and return 1 iff answer is yes.
+ Takes three args which are given to printf to print the question.
+ The first, a control string, should end in "? ".
+ It should not say how to answer, because we do that. */
+
+int
+query (const char *ctlstr, ...)
+{
+ va_list args;
+
+ va_start (args, ctlstr);
+ return defaulted_query (ctlstr, '\0', args);
+ va_end (args);
+}
+
+/* A helper for parse_escape that converts a host character to a
+ target character. C is the host character. If conversion is
+ possible, then the target character is stored in *TARGET_C and the
+ function returns 1. Otherwise, the function returns 0. */
+
+static int
+host_char_to_target (int c, int *target_c)
{
- int len = end - start;
- char *copy = alloca (end - start + 1);
+ struct obstack host_data;
+ char the_char = c;
+ struct cleanup *cleanups;
+ int result = 0;
- memcpy (copy, start, len);
- copy[len] = '\0';
+ obstack_init (&host_data);
+ cleanups = make_cleanup_obstack_free (&host_data);
- error (_("There is no control character `\\%s' in the `%s' character set."),
- copy, target_charset ());
+ convert_between_encodings (target_charset (), host_charset (),
+ &the_char, 1, 1, &host_data, translit_none);
+
+ if (obstack_object_size (&host_data) == 1)
+ {
+ result = 1;
+ *target_c = *(char *) obstack_base (&host_data);
+ }
+
+ do_cleanups (cleanups);
+ return result;
}
/* Parse a C escape sequence. STRING_PTR points to a variable
int
parse_escape (char **string_ptr)
{
- int target_char;
+ int target_char = -2; /* initialize to avoid GCC warnings */
int c = *(*string_ptr)++;
- if (c_parse_backslash (c, &target_char))
- return target_char;
- else
- switch (c)
- {
+ switch (c)
+ {
case '\n':
return -2;
case 0:
(*string_ptr)--;
return 0;
- case '^':
- {
- /* Remember where this escape sequence started, for reporting
- errors. */
- char *sequence_start_pos = *string_ptr - 1;
-
- c = *(*string_ptr)++;
-
- if (c == '?')
- {
- /* XXXCHARSET: What is `delete' in the host character set? */
- c = 0177;
-
- if (!host_char_to_target (c, &target_char))
- error (_("There is no character corresponding to `Delete' "
- "in the target character set `%s'."), host_charset ());
-
- return target_char;
- }
- else if (c == '\\')
- target_char = parse_escape (string_ptr);
- else
- {
- if (!host_char_to_target (c, &target_char))
- no_control_char_error (sequence_start_pos, *string_ptr);
- }
-
- /* Now target_char is something like `c', and we want to find
- its control-character equivalent. */
- if (!target_char_to_control_char (target_char, &target_char))
- no_control_char_error (sequence_start_pos, *string_ptr);
-
- return target_char;
- }
-
- /* XXXCHARSET: we need to use isdigit and value-of-digit
- methods of the host character set here. */
case '0':
case '1':
case '6':
case '7':
{
- int i = c - '0';
+ int i = host_hex_value (c);
int count = 0;
while (++count < 3)
{
c = (**string_ptr);
- if (c >= '0' && c <= '7')
+ if (isdigit (c) && c != '8' && c != '9')
{
(*string_ptr)++;
i *= 8;
- i += c - '0';
+ i += host_hex_value (c);
}
else
{
}
return i;
}
- default:
- if (!host_char_to_target (c, &target_char))
- error
- ("The escape sequence `\%c' is equivalent to plain `%c', which"
- " has no equivalent\n" "in the `%s' character set.", c, c,
- target_charset ());
- return target_char;
- }
+
+ case 'a':
+ c = '\a';
+ break;
+ case 'b':
+ c = '\b';
+ break;
+ case 'f':
+ c = '\f';
+ break;
+ case 'n':
+ c = '\n';
+ break;
+ case 'r':
+ c = '\r';
+ break;
+ case 't':
+ c = '\t';
+ break;
+ case 'v':
+ c = '\v';
+ break;
+
+ default:
+ break;
+ }
+
+ if (!host_char_to_target (c, &target_char))
+ error
+ ("The escape sequence `\%c' is equivalent to plain `%c', which"
+ " has no equivalent\n" "in the `%s' character set.", c, c,
+ target_charset ());
+ return target_char;
}
\f
/* Print the character C on STREAM as part of the contents of a literal
}
void
+fputstrn_filtered (const char *str, int n, int quoter,
+ struct ui_file *stream)
+{
+ int i;
+ for (i = 0; i < n; i++)
+ printchar (str[i], fputs_filtered, fprintf_filtered, stream, quoter);
+}
+
+void
fputstrn_unfiltered (const char *str, int n, int quoter,
struct ui_file *stream)
{
rows = INT_MAX;
if (cols <= 0)
- rl_get_screen_size (NULL, &cols);
+ cols = INT_MAX;
/* Update Readline's idea of the terminal size. */
rl_set_screen_size (rows, cols);
linebuffer = xstrvprintf (format, args);
old_cleanups = make_cleanup (xfree, linebuffer);
- fputs_unfiltered (linebuffer, stream);
+ if (debug_timestamp && stream == gdb_stdlog)
+ {
+ struct timeval tm;
+ char *timestamp;
+ int len, need_nl;
+
+ gettimeofday (&tm, NULL);
+
+ len = strlen (linebuffer);
+ need_nl = (len > 0 && linebuffer[len - 1] != '\n');
+
+ timestamp = xstrprintf ("%ld:%ld %s%s",
+ (long) tm.tv_sec, (long) tm.tv_usec,
+ linebuffer,
+ need_nl ? "\n": "");
+ make_cleanup (xfree, timestamp);
+ fputs_unfiltered (timestamp, stream);
+ }
+ else
+ fputs_unfiltered (linebuffer, stream);
do_cleanups (old_cleanups);
}
return match;
}
-
-static void pagination_on_command (char *arg, int from_tty);
static void
pagination_on_command (char *arg, int from_tty)
{
pagination_enabled = 1;
}
-static void pagination_on_command (char *arg, int from_tty);
static void
pagination_off_command (char *arg, int from_tty)
{
pagination_enabled = 0;
}
+
+static void
+show_debug_timestamp (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Timestamping debugging messages is %s.\n"), value);
+}
\f
void
NULL,
show_asm_demangle,
&setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("timestamp", class_maintenance,
+ &debug_timestamp, _("\
+Set timestamping of debugging messages."), _("\
+Show timestamping of debugging messages."), _("\
+When set, debugging messages will be marked with seconds and microseconds."),
+ NULL,
+ show_debug_timestamp,
+ &setdebuglist, &showdebuglist);
}
/* Machine specific function to handle SIGWINCH signal. */
return buf[cell];
}
-int
-strlen_paddr (void)
-{
- return (TARGET_ADDR_BIT / 8 * 2);
-}
-
-char *
-paddr (CORE_ADDR addr)
-{
- return phex (addr, TARGET_ADDR_BIT / 8);
-}
-
-char *
-paddr_nz (CORE_ADDR addr)
-{
- return phex_nz (addr, TARGET_ADDR_BIT / 8);
-}
-
const char *
-paddress (CORE_ADDR addr)
+paddress (struct gdbarch *gdbarch, CORE_ADDR addr)
{
/* Truncate address to the size of a target address, avoiding shifts
larger or equal than the width of a CORE_ADDR. The local
when it won't occur. */
/* NOTE: This assumes that the significant address information is
kept in the least significant bits of ADDR - the upper bits were
- either zero or sign extended. Should ADDRESS_TO_POINTER() or
+ either zero or sign extended. Should gdbarch_address_to_pointer or
some ADDRESS_TO_PRINTABLE() be used to do the conversion? */
- int addr_bit = TARGET_ADDR_BIT;
+ int addr_bit = gdbarch_addr_bit (gdbarch);
if (addr_bit < (sizeof (CORE_ADDR) * HOST_CHAR_BIT))
addr &= ((CORE_ADDR) 1 << addr_bit) - 1;
}
char *
-paddr_u (CORE_ADDR addr)
+pulongest (ULONGEST u)
{
- return decimal2str ("", addr, 0);
+ return decimal2str ("", u, 0);
}
char *
-paddr_d (LONGEST addr)
+plongest (LONGEST l)
{
- if (addr < 0)
- return decimal2str ("-", -addr, 0);
+ if (l < 0)
+ return decimal2str ("-", -l, 0);
else
- return decimal2str ("", addr, 0);
+ return decimal2str ("", l, 0);
}
/* Eliminate warning from compiler on 32-bit systems. */
string_to_core_addr (const char *my_string)
{
CORE_ADDR addr = 0;
+
if (my_string[0] == '0' && tolower (my_string[1]) == 'x')
{
- /* Assume that it is in decimal. */
+ /* Assume that it is in hex. */
int i;
for (i = 2; my_string[i] != '\0'; i++)
{
else if (isxdigit (my_string[i]))
addr = (tolower (my_string[i]) - 'a' + 0xa) + (addr * 16);
else
- internal_error (__FILE__, __LINE__, _("invalid hex"));
+ error (_("invalid hex \"%s\""), my_string);
}
}
else
if (isdigit (my_string[i]))
addr = (my_string[i] - '0') + (addr * 10);
else
- internal_error (__FILE__, __LINE__, _("invalid decimal"));
+ error (_("invalid decimal \"%s\""), my_string);
}
}
+
return addr;
}
+const char *
+host_address_to_string (const void *addr)
+{
+ char *str = get_cell ();
+
+ xsnprintf (str, CELLSIZE, "0x%s", phex_nz ((uintptr_t) addr, sizeof (addr)));
+ return str;
+}
+
char *
gdb_realpath (const char *filename)
{
unsigned long
gnu_debuglink_crc32 (unsigned long crc, unsigned char *buf, size_t len)
{
- static const unsigned long crc32_table[256] = {
+ static const unsigned int crc32_table[256] = {
0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419,
0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4,
0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07,
{
return;
}
+
+/* The bit offset of the highest byte in a ULONGEST, for overflow
+ checking. */
+
+#define HIGH_BYTE_POSN ((sizeof (ULONGEST) - 1) * HOST_CHAR_BIT)
+
+/* True (non-zero) iff DIGIT is a valid digit in radix BASE,
+ where 2 <= BASE <= 36. */
+
+static int
+is_digit_in_base (unsigned char digit, int base)
+{
+ if (!isalnum (digit))
+ return 0;
+ if (base <= 10)
+ return (isdigit (digit) && digit < base + '0');
+ else
+ return (isdigit (digit) || tolower (digit) < base - 10 + 'a');
+}
+
+static int
+digit_to_int (unsigned char c)
+{
+ if (isdigit (c))
+ return c - '0';
+ else
+ return tolower (c) - 'a' + 10;
+}
+
+/* As for strtoul, but for ULONGEST results. */
+
+ULONGEST
+strtoulst (const char *num, const char **trailer, int base)
+{
+ unsigned int high_part;
+ ULONGEST result;
+ int minus = 0;
+ int i = 0;
+
+ /* Skip leading whitespace. */
+ while (isspace (num[i]))
+ i++;
+
+ /* Handle prefixes. */
+ if (num[i] == '+')
+ i++;
+ else if (num[i] == '-')
+ {
+ minus = 1;
+ i++;
+ }
+
+ if (base == 0 || base == 16)
+ {
+ if (num[i] == '0' && (num[i + 1] == 'x' || num[i + 1] == 'X'))
+ {
+ i += 2;
+ if (base == 0)
+ base = 16;
+ }
+ }
+
+ if (base == 0 && num[i] == '0')
+ base = 8;
+
+ if (base == 0)
+ base = 10;
+
+ if (base < 2 || base > 36)
+ {
+ errno = EINVAL;
+ return 0;
+ }
+
+ result = high_part = 0;
+ for (; is_digit_in_base (num[i], base); i += 1)
+ {
+ result = result * base + digit_to_int (num[i]);
+ high_part = high_part * base + (unsigned int) (result >> HIGH_BYTE_POSN);
+ result &= ((ULONGEST) 1 << HIGH_BYTE_POSN) - 1;
+ if (high_part > 0xff)
+ {
+ errno = ERANGE;
+ result = ~ (ULONGEST) 0;
+ high_part = 0;
+ minus = 0;
+ break;
+ }
+ }
+
+ if (trailer != NULL)
+ *trailer = &num[i];
+
+ result = result + ((ULONGEST) high_part << HIGH_BYTE_POSN);
+ if (minus)
+ return -result;
+ else
+ return result;
+}
+
+/* Simple, portable version of dirname that does not modify its
+ argument. */
+
+char *
+ldirname (const char *filename)
+{
+ const char *base = lbasename (filename);
+ char *dirname;
+
+ while (base > filename && IS_DIR_SEPARATOR (base[-1]))
+ --base;
+
+ if (base == filename)
+ return NULL;
+
+ dirname = xmalloc (base - filename + 2);
+ memcpy (dirname, filename, base - filename);
+
+ /* On DOS based file systems, convert "d:foo" to "d:.", so that we
+ create "d:./bar" later instead of the (different) "d:/bar". */
+ if (base - filename == 2 && IS_ABSOLUTE_PATH (base)
+ && !IS_DIR_SEPARATOR (filename[0]))
+ dirname[base++ - filename] = '.';
+
+ dirname[base - filename] = '\0';
+ return dirname;
+}
+
+/* Call libiberty's buildargv, and return the result.
+ If buildargv fails due to out-of-memory, call nomem.
+ Therefore, the returned value is guaranteed to be non-NULL,
+ unless the parameter itself is NULL. */
+
+char **
+gdb_buildargv (const char *s)
+{
+ char **argv = buildargv (s);
+ if (s != NULL && argv == NULL)
+ nomem (0);
+ return argv;
+}
+
+/* Provide a prototype to silence -Wmissing-prototypes. */
+extern initialize_file_ftype _initialize_utils;
+
+void
+_initialize_utils (void)
+{
+ add_internal_problem_command (&internal_error_problem);
+ add_internal_problem_command (&internal_warning_problem);
+}
OSDN Git Service
