#define HELP_toybox_uid_sys "When commands like useradd/groupadd allocate system IDs, start here.\n\n"
+#define HELP_toybox_pedantic_args "Check arguments for commands that have no arguments.\n\n"
+
#define HELP_toybox_debug "Enable extra checks for debugging purposes. All of them catch\nthings that can only go wrong at development time, not runtime.\n\n"
#define HELP_toybox_norecurse "When one toybox command calls another, usually it just calls the new\ncommand's main() function rather than searching the $PATH and calling\nexec on another file (which is much slower).\n\nThis disables that optimization, so toybox will run external commands\n even when it has a built-in version of that command. This requires\n toybox symlinks to be installed in the $PATH, or re-invoking the\n \"toybox\" multiplexer command by name.\n\n"
#define HELP_toybox_i18n "Support for UTF-8 character sets, and some locale support.\n\n"
-#define HELP_toybox_help_dashdash "Support --help argument in all commands, even ones with a NULL\noptstring. Produces the same output as \"help command\".\n\n"
+#define HELP_toybox_help_dashdash "Support --help argument in all commands, even ones with a NULL\noptstring. (Use TOYFLAG_NOHELP to disable.) Produces the same output\nas \"help command\". --version shows toybox version.\n\n"
#define HELP_toybox_help "Include help text for each command.\n\n"
#define HELP_toybox_suid "Support for the Set User ID bit, to install toybox suid root and drop\npermissions for commands which do not require root access. To use\nthis change ownership of the file to the root user and set the suid\nbit in the file permissions:\n\nchown root:root toybox; chmod +s toybox\n\nprompt \"Security Blanket\"\ndefault TOYBOX_LSM_NONE\nhelp\nSelect a Linux Security Module to complicate your system\nuntil you can't find holes in it.\n\n"
-#define HELP_toybox "usage: toybox [--long | --version | [command] [arguments...]]\n\nWith no arguments, shows available commands. First argument is\nname of a command to run, followed by any arguments to that command.\n\n--long Show path to each command\n--version Show toybox version\n\nTo install command symlinks, try:\n for i in $(/bin/toybox --long); do ln -s /bin/toybox $i; done\n\n"
+#define HELP_toybox "usage: toybox [--long | --help | --version | [command] [arguments...]]\n\nWith no arguments, shows available commands. First argument is\nname of a command to run, followed by any arguments to that command.\n\n--long Show path to each command\n\nTo install command symlinks, try:\n for i in $(/bin/toybox --long); do ln -s /bin/toybox $i; done\n\nMost toybox commands also understand the following arguments:\n\n--help Show command help (only)\n--version Show toybox version (only)\n\nThe filename \"-\" means stdin, \"--\" stops argument parsing,\nand numerical arguments accept a single letter suffix for\nkilo, mega, giga, tera, peta, and exabytes, plus an additional\n\"d\" to indicate decimal 1000's instead of 1024.\n\n"
#define HELP_stop "usage: stop [SERVICE...]\n\nStop the given system service, or netd/surfaceflinger/zygotes.\n\n"
#define HELP_skeleton "usage: skeleton [-a] [-b STRING] [-c NUMBER] [-d LIST] [-e COUNT] [...]\n\nTemplate for new commands. You don't need this.\n\nWhen creating a new command, copy this file and delete the parts you\ndon't need. Be sure to replace all instances of \"skeleton\" (upper and lower\ncase) with your new command name.\n\nFor simple commands, \"hello.c\" is probably a better starting point.\n\n"
+#define HELP_hostid "usage: hostid\n\nPrint the numeric identifier for the current host.\n\n"
+
#define HELP_hello "usage: hello [-s]\n\nA hello world program. You don't need this.\n\nMostly used as a simple template for adding new commands.\nOccasionally nice to smoketest kernel booting via \"init=/usr/bin/hello\".\n\n"
#define HELP_umount "usage: umount [-a [-t TYPE[,TYPE...]]] [-vrfD] [DIR...]\n\nUnmount the listed filesystems.\n\n-a Unmount all mounts in /proc/mounts instead of command line list\n-D Don't free loopback device(s).\n-f Force unmount.\n-l Lazy unmount (detach from filesystem now, close when last user does).\n-n Don't use /proc/mounts\n-r Remount read only if unmounting fails.\n-t Restrict \"all\" to mounts of TYPE (or use \"noTYPE\" to skip)\n-v Verbose\n\n\n"
#define HELP_hostname "usage: hostname [-b] [-F FILENAME] [newname]\n\nGet/Set the current hostname\n\n-b Set hostname to 'localhost' if otherwise unset\n-F Set hostname to contents of FILENAME\n\n"
-#define HELP_dmesg "usage: dmesg [-c] [-r|-t] [-n LEVEL] [-s SIZE]\n\nPrint or control the kernel ring buffer.\n\n-c Clear the ring buffer after printing\n-n Set kernel logging LEVEL (1-9)\n-r Raw output (with <level markers>)\n-s Show the last SIZE many bytes\n-t Don't print kernel's timestamps\n\n"
+#define HELP_tunctl "usage: tunctl [-dtT] [-u USER] NAME\n\nCreate and delete tun/tap virtual ethernet devices.\n\n-T Use tap (ethernet frames) instead of tun (ip packets)\n-d Delete tun/tap device\n-t Create tun/tap device\n-u Set owner (user who can read/write device without root access)\n\n\n"
-#define HELP_rfkill "Usage: rfkill COMMAND [DEVICE]\n\nEnable/disable wireless devices.\n\nCommands:\nlist [DEVICE] List current state\nblock DEVICE Disable device\nunblock DEVICE Enable device\n\nDEVICE is an index number, or one of:\nall, wlan(wifi), bluetooth, uwb(ultrawideband), wimax, wwan, gps, fm.\n\n\n"
+#define HELP_rfkill "Usage: rfkill COMMAND [DEVICE]\n\nEnable/disable wireless devices.\n\nCommands:\nlist [DEVICE] List current state\nblock DEVICE Disable device\nunblock DEVICE Enable device\n\nDEVICE is an index number, or one of:\nall, wlan(wifi), bluetooth, uwb(ultrawideband), wimax, wwan, gps, fm.\n\n"
#define HELP_netstat "usage: netstat [-pWrxwutneal]\n\nDisplay networking information. Default is netsat -tuwx\n\n-r routing table\n-a all sockets (not just connected)\n-l listening server sockets\n-t TCP sockets\n-u UDP sockets\n-w raw sockets\n-x unix sockets\n-e extended info\n-n don't resolve names\n-W wide display\n-p PID/Program name of sockets\n\n"
-#define HELP_netcat_listen_tty "usage: netcat [-t]\n\n-t allocate tty (must come before -l or -L)\n\n"
+#define HELP_netcat "usage: netcat [-tu] [-lL COMMAND...] [-wpq #] [-s addr] {IPADDR PORTNUM|-f FILENAME}\n\n-L listen for multiple incoming connections (server mode)\n-W SECONDS timeout for idle connection\n-f use FILENAME (ala /dev/ttyS0) instead of network\n-l listen for one incoming connection\n-p local port number\n-q quit SECONDS after EOF on stdin, even if stdout hasn't closed yet.\n-s local source address\n-t allocate tty (must come before -l or -L)\n-w SECONDS timeout to establish connection\n\nUse \"stty 115200 -F /dev/ttyS0 && stty raw -echo -ctlecho\" with\nnetcat -f to connect to a serial port.\n\nThe command line after -l or -L is executed (as a child process) to handle\neach incoming connection. If blank -l waits for a connection and forwards\nit to stdin/stdout. If no -p specified, -l prints port it bound to and\nbackgrounds itself (returning immediately).\n\nFor a quick-and-dirty server, try something like:\nnetcat -s 127.0.0.1 -p 1234 -tL /bin/bash -l\n"
-#define HELP_netcat "usage: netcat [-lL COMMAND...] [-u] [-wpq #] [-s addr] {IPADDR PORTNUM|-f FILENAME}\n\n-L listen for multiple incoming connections (server mode).\n-f use FILENAME (ala /dev/ttyS0) instead of network\n-l listen for one incoming connection.\n-p local port number\n-q SECONDS quit this many seconds after EOF on stdin.\n-s local ipv4 address\n-w SECONDS timeout for connection\n\nUse \"stty 115200 -F /dev/ttyS0 && stty raw -echo -ctlecho\" with\nnetcat -f to connect to a serial port.\n\nThe command line after -l or -L is executed to handle each incoming\nconnection. If none, the connection is forwarded to stdin/stdout.\n\nFor a quick-and-dirty server, try something like:\nnetcat -s 127.0.0.1 -p 1234 -tL /bin/bash -l\n"
+#define HELP_microcom "usage: microcom [-s SPEED] [-X] DEVICE\n\nSimple serial console.\n\n-s Set baud rate to SPEED\n-X Ignore ^@ (send break) and ^] (exit).\n\n"
#define HELP_ifconfig "usage: ifconfig [-a] [INTERFACE [ACTION...]]\n\nDisplay or configure network interface.\n\nWith no arguments, display active interfaces. First argument is interface\nto operate on, one argument by itself displays that interface.\n\n-a Show all interfaces, not just active ones\n\nAdditional arguments are actions to perform on the interface:\n\nADDRESS[/NETMASK] - set IPv4 address (1.2.3.4/5)\ndefault - unset ipv4 address\nadd|del ADDRESS[/PREFIXLEN] - add/remove IPv6 address (1111::8888/128)\nup - enable interface\ndown - disable interface\n\nnetmask|broadcast|pointopoint ADDRESS - set more IPv4 characteristics\nhw ether|infiniband ADDRESS - set LAN hardware address (AA:BB:CC...)\ntxqueuelen LEN - number of buffered packets before output blocks\nmtu LEN - size of outgoing packets (Maximum Transmission Unit)\n\nFlags you can set on an interface (or -remove by prefixing with -):\narp - don't use Address Resolution Protocol to map LAN routes\npromisc - don't discard packets that aren't to this LAN hardware address\nmulticast - force interface into multicast mode if the driver doesn't\nallmulti - promisc for multicast packets\n\nObsolete fields included for historical purposes:\nirq|io_addr|mem_start ADDR - micromanage obsolete hardware\noutfill|keepalive INTEGER - SLIP analog dialup line quality monitoring\nmetric INTEGER - added to Linux 0.9.10 with comment \"never used\", still true\n\n"
+#define HELP_ftpput "An ftpget that defaults to -s instead of -g\n\n"
+
+#define HELP_ftpget "usage: ftpget [-cvgslLmMdD] [-P PORT] [-p PASSWORD] [-u USER] HOST [LOCAL] REMOTE\n\nTalk to ftp server. By default get REMOTE file via passive anonymous\ntransfer, optionally saving under a LOCAL name. Can also send, list, etc.\n\n-c Continue partial transfer\n-p Use PORT instead of \"21\"\n-P Use PASSWORD instead of \"ftpget@\"\n-u Use USER instead of \"anonymous\"\n-v Verbose\n\nWays to interact with FTP server:\n-d Delete file\n-D Remove directory\n-g Get file (default)\n-l List directory\n-L List (filenames only)\n-m Move file on server from LOCAL to REMOTE\n-M mkdir\n-s Send file\n\n"
+
#define HELP_yes "usage: yes [args...]\n\nRepeatedly output line until killed. If no args, output 'y'.\n\n\n"
#define HELP_xxd "usage: xxd [-c n] [-g n] [-l n] [-p] [-r] [-s n] [file]\n\nHexdump a file to stdout. If no file is listed, copy from stdin.\nFilename \"-\" is a synonym for stdin.\n\n-c n Show n bytes per line (default 16).\n-g n Group bytes by adding a ' ' every n bytes (default 2).\n-l n Limit of n bytes before stopping (default is no limit).\n-p Plain hexdump (30 bytes/line, no grouping).\n-r Reverse operation: turn a hexdump into a binary file.\n-s n Skip to offset n.\n\n"
#define HELP_usleep "usage: usleep MICROSECONDS\n\nPause for MICROSECONDS microseconds.\n\n"
-#define HELP_uptime "usage: uptime\n\nTell how long the system has been running and the system load\naverages for the past 1, 5 and 15 minutes.\n\n"
+#define HELP_uptime "usage: uptime [-s]\n\nTell the current time, how long the system has been running, the number\nof users, and the system load averages for the past 1, 5 and 15 minutes.\n\n-s Since when has the system been up?\n\n"
#define HELP_truncate "usage: truncate [-c] -s SIZE file...\n\nSet length of file(s), extending sparsely if necessary.\n\n-c Don't create file if it doesn't exist.\n-s New size (with optional prefix and suffix)\n\nSIZE prefix: + add, - subtract, < shrink to, > expand to,\n / multiple rounding down, % multiple rounding up\nSIZE suffix: k=1024, m=1024^2, g=1024^3, t=1024^4, p=1024^5, e=1024^6\n\n"
#define HELP_swapoff "usage: swapoff swapregion\n\nDisable swapping on a given swapregion.\n\n"
-#define HELP_stat "usage: stat [-tfL] [-c FORMAT] FILE...\n\nDisplay status of files or filesystems.\n\n-c Output specified FORMAT string instead of default\n-f display filesystem status instead of file status\n-L Follow symlinks\n-t terse (-c \"%n %s %b %f %u %g %D %i %h %t %T %X %Y %Z %o\")\n (with -f = -c \"%n %i %l %t %s %S %b %f %a %c %d\")\n\nThe valid format escape sequences for files:\n%a Access bits (octal) |%A Access bits (flags)|%b Blocks allocated\n%B Bytes per block |%d Device ID (dec) |%D Device ID (hex)\n%f All mode bits (hex) |%F File type |%g Group ID\n%G Group name |%h Hard links |%i Inode\n%m Mount point |%n Filename |%N Long filename\n%o I/O block size |%s Size (bytes) |%t Devtype major (hex)\n%T Devtype minor (hex) |%u User ID |%U User name\n%x Access time |%X Access unix time |%y File write time\n%Y File write unix time|%z Dir change time |%Z Dir change unix time\n\nThe valid format escape sequences for filesystems:\n%a Available blocks |%b Total blocks |%c Total inodes\n%d Free inodes |%f Free blocks |%i File system ID\n%l Max filename length |%n File name |%s Fragment size\n%S Best transfer size |%t FS type (hex) |%T FS type (driver name)\n\n"
+#define HELP_stat "usage: stat [-tfL] [-c FORMAT] FILE...\n\nDisplay status of files or filesystems.\n\n-c Output specified FORMAT string instead of default\n-f display filesystem status instead of file status\n-L Follow symlinks\n-t terse (-c \"%n %s %b %f %u %g %D %i %h %t %T %X %Y %Z %o\")\n (with -f = -c \"%n %i %l %t %s %S %b %f %a %c %d\")\n\nThe valid format escape sequences for files:\n%a Access bits (octal) |%A Access bits (flags)|%b Size/512\n%B Bytes per %b (512) |%d Device ID (dec) |%D Device ID (hex)\n%f All mode bits (hex) |%F File type |%g Group ID\n%G Group name |%h Hard links |%i Inode\n%m Mount point |%n Filename |%N Long filename\n%o I/O block size |%s Size (bytes) |%t Devtype major (hex)\n%T Devtype minor (hex) |%u User ID |%U User name\n%x Access time |%X Access unix time |%y File write time\n%Y File write unix time|%z Dir change time |%Z Dir change unix time\n\nThe valid format escape sequences for filesystems:\n%a Available blocks |%b Total blocks |%c Total inodes\n%d Free inodes |%f Free blocks |%i File system ID\n%l Max filename length |%n File name |%s Fragment size\n%S Best transfer size |%t FS type (hex) |%T FS type (driver name)\n\n"
#define HELP_shred "usage: shred [-fuz] [-n COUNT] [-s SIZE] FILE...\n\nSecurely delete a file by overwriting its contents with random data.\n\n-f Force (chmod if necessary)\n-n COUNT Random overwrite iterations (default 1)\n-o OFFSET Start at OFFSET\n-s SIZE Use SIZE instead of detecting file size\n-u unlink (actually delete file when done)\n-x Use exact size (default without -s rounds up to next 4k)\n-z zero at end\n\nNote: data journaling filesystems render this command useless, you must\noverwrite all free space (fill up disk) to erase old data on those.\n\n"
#define HELP_lsmod "usage: lsmod\n\nDisplay the currently loaded modules, their sizes and their dependencies.\n\n"
-#define HELP_chattr "usage: chattr [-R] [-+=AacDdijsStTu] [-v version] [File...]\n\nChange file attributes on a Linux second extended file system.\n\nOperators:\n '-' Remove attributes.\n '+' Add attributes.\n '=' Set attributes.\n\nAttributes:\n A Don't track atime.\n a Append mode only.\n c Enable compress.\n D Write dir contents synchronously.\n d Don't backup with dump.\n i Cannot be modified (immutable).\n j Write all data to journal first.\n s Zero disk storage when deleted.\n S Write file contents synchronously.\n t Disable tail-merging of partial blocks with other files.\n u Allow file to be undeleted.\n -R Recurse.\n -v Set the file's version/generation number.\n\n\n"
+#define HELP_chattr "usage: chattr [-R] [-+=AacDdijsStTu] [-v version] [File...]\n\nChange file attributes on a Linux second extended file system.\n\n-R Recurse.\n-v Set the file's version/generation number.\n\nOperators:\n '-' Remove attributes.\n '+' Add attributes.\n '=' Set attributes.\n\nAttributes:\n A Don't track atime.\n a Append mode only.\n c Enable compress.\n D Write dir contents synchronously.\n d Don't backup with dump.\n i Cannot be modified (immutable).\n j Write all data to journal first.\n s Zero disk storage when deleted.\n S Write file contents synchronously.\n t Disable tail-merging of partial blocks with other files.\n u Allow file to be undeleted.\n\n"
-#define HELP_lsattr "usage: lsattr [-Radlv] [Files...]\n\nList file attributes on a Linux second extended file system.\n\n-R Recursively list attributes of directories and their contents.\n-a List all files in directories, including files that start with '.'.\n-d List directories like other files, rather than listing their contents.\n-l List long flag names.\n-v List the file's version/generation number.\n\n"
+#define HELP_lsattr "usage: lsattr [-Radlv] [Files...]\n\nList file attributes on a Linux second extended file system.\n(AacDdijsStu defined in chattr --help)\n\n-R Recursively list attributes of directories and their contents.\n-a List all files in directories, including files that start with '.'.\n-d List directories like other files, rather than listing their contents.\n-l List long flag names.\n-v List the file's version/generation number.\n\n"
#define HELP_losetup "usage: losetup [-cdrs] [-o OFFSET] [-S SIZE] {-d DEVICE...|-j FILE|-af|{DEVICE FILE}}\n\nAssociate a loopback device with a file, or show current file (if any)\nassociated with a loop device.\n\nInstead of a device:\n-a Iterate through all loopback devices\n-f Find first unused loop device (may create one)\n-j Iterate through all loopback devices associated with FILE\n\nexisting:\n-c Check capacity (file size changed)\n-d Detach loopback device\n\nnew:\n-s Show device name (alias --show)\n-o Start assocation at OFFSET into FILE\n-r Read only\n-S Limit SIZE of loopback association (alias --sizelimit)\n\n"
#define HELP_hwclock "usage: hwclock [-rswtluf]\n\n-f FILE Use specified device file instead of /dev/rtc (--rtc)\n-l Hardware clock uses localtime (--localtime)\n-r Show hardware clock time (--show)\n-s Set system time from hardware clock (--hctosys)\n-t Set the system time based on the current timezone (--systz)\n-u Hardware clock uses UTC (--utc)\n-w Set hardware clock from system time (--systohc)\n\n"
-#define HELP_hostid "usage: hostid\n\nPrint the numeric identifier for the current host.\n\n"
-
#define HELP_hexedit "usage: hexedit FILENAME\n\nHexadecimal file editor. All changes are written to disk immediately.\n\n-r Read only (display but don't edit)\n\nKeys:\nArrows Move left/right/up/down by one line/column\nPg Up/Pg Dn Move up/down by one page\n0-9, a-f Change current half-byte to hexadecimal value\nu Undo\nq/^c/^d/<esc> Quit\n\n"
#define HELP_help "usage: help [-ah] [command]\n\nShow usage information for toybox commands.\nRun \"toybox\" with no arguments for a list of available commands.\n\n-h HTML output\n-a All commands\n"
#define HELP_flock "usage: flock [-sxun] fd\n\nManage advisory file locks.\n\n-s Shared lock.\n-x Exclusive lock (default).\n-u Unlock.\n-n Non-blocking: fail rather than wait for the lock.\n\n"
-#define HELP_fallocate "usage: fallocate [-l size] file\n\nTell the filesystem to allocate space for a file.\n\n"
+#define HELP_fallocate "usage: fallocate [-l size] [-o offset] file\n\nTell the filesystem to allocate space for a file.\n\n"
#define HELP_factor "usage: factor NUMBER...\n\nFactor integers.\n\n"
#define HELP_base64 "usage: base64 [-di] [-w COLUMNS] [FILE...]\n\nEncode or decode in base64.\n\n-d decode\n-i ignore non-alphabetic characters\n-w wrap output at COLUMNS (default 76 or 0 for no wrap)\n\n"
+#define HELP_ascii "usage: ascii\n\nDisplay ascii character set.\n\n"
+
#define HELP_acpi "usage: acpi [-abctV]\n\nShow status of power sources and thermal devices.\n\n-a show power adapters\n-b show batteries\n-c show cooling device state\n-t show temperatures\n-V show everything\n\n"
#define HELP_xzcat "usage: xzcat [filename...]\n\nDecompress listed files to stdout. Use stdin if no files listed.\n\n\n\n"
#define HELP_sh "usage: sh [-c command] [script]\n\nCommand shell. Runs a shell script, or reads input interactively\nand responds to it.\n\n-c command line to execute\n-i interactive mode (default when STDIN is a tty)\n\n"
-#define HELP_setfattr "usage: setfattr [-h] -n NAME [-v VALUE] FILE...\nusage: setfattr [-h] -x NAME FILE...\n\nWrite POSIX extended attributes.\n\n-h Do not dereference symbolic links.\n-n Set value of given attribute.\n-x Remove value of given attribute.\n-v Value to use with -n (default is empty).\n\n"
+#define HELP_setfattr "usage: setfattr [-h] [-x|-n NAME] [-v VALUE] FILE...\n\nWrite POSIX extended attributes.\n\n-h Do not dereference symlink.\n-n Set given attribute.\n-x Remove given attribute.\n-v Set value for attribute -n (default is empty).\n\n"
-#define HELP_route "usage: route [-ne] [-A inet[6]] / [add|del]\n\nDisplay/Edit kernel routing tables.\n\n-n no name lookups\n-e display other/more information\n-A inet{6} Select Address Family\n\nreject mod dyn reinstate metric netmask gw mss window irtt dev\n\n"
+#define HELP_route "usage: route [-ne] [-A [46]] [add|del TARGET [OPTIONS]]\n\nDisplay, add or delete network routes in the \"Forwarding Information Base\".\n\n-n Show numerical addresses (no DNS lookups)\n-e display netstat fields\n\nRouting means sending packets out a network interface to an address.\nThe kernel can tell where to send packets one hop away by examining each\ninterface's address and netmask, so the most common use of this command\nis to identify a \"gateway\" that forwards other traffic.\n\nAssigning an address to an interface automatically creates an appropriate\nnetwork route (\"ifconfig eth0 10.0.2.15/8\" does \"route add 10.0.0.0/8 eth0\"\nfor you), although some devices (such as loopback) won't show it in the\ntable. For machines more than one hop away, you need to specify a gateway\n(ala \"route add default gw 10.0.2.2\").\n\nThe address \"default\" is a wildcard address (0.0.0.0/0) matching all\npackets without a more specific route.\n\nAvailable OPTIONS include:\nreject - blocking route (force match failure)\ndev NAME - force packets out this interface (ala \"eth0\")\nnetmask - old way of saying things like ADDR/24\ngw ADDR - forward packets to gateway ADDR\n\n\n"
#define HELP_ping "usage: ping [OPTIONS] HOST\n\nCheck network connectivity by sending packets to a host and reporting\nits response.\n\nSend ICMP ECHO_REQUEST packets to ipv4 or ipv6 addresses and prints each\necho it receives back, with round trip time.\n\nOptions:\n-4, -6 Force IPv4 or IPv6\n-c CNT Send CNT many packets\n-I IFACE/IP Source interface or address\n-q Quiet, only displays output at start and when finished\n-s SIZE Packet SIZE in bytes (default 56)\n-t TTL Set Time (number of hops) To Live\n-W SEC Seconds to wait for response after all packets sent (default 10)\n-w SEC Exit after this many seconds\n\n"
#define HELP_more "usage: more [FILE...]\n\nView FILE(s) (or stdin) one screenful at a time.\n\n"
-#define HELP_modprobe "usage: modprobe [-alrqvsDb] MODULE [symbol=value][...]\n\nmodprobe utility - inserts modules and dependencies.\n\n-a Load multiple MODULEs\n-l List (MODULE is a pattern)\n-r Remove MODULE (stacks) or do autoclean\n-q Quiet\n-v Verbose\n-s Log to syslog\n-D Show dependencies\n-b Apply blacklist to module names too\n\n"
+#define HELP_modprobe "usage: modprobe [-alrqvsDb] [-d DIR] MODULE [symbol=value][...]\n\nmodprobe utility - inserts modules and dependencies.\n\n-a Load multiple MODULEs\n-d Load modules from DIR, option may be used multiple times\n-l List (MODULE is a pattern)\n-r Remove MODULE (stacks) or do autoclean\n-q Quiet\n-v Verbose\n-s Log to syslog\n-D Show dependencies\n-b Apply blacklist to module names too\n\n"
#define HELP_mke2fs_extended "usage: mke2fs [-E stride=###] [-O option[,option]]\n\n-E stride= Set RAID stripe size (in blocks)\n-O [opts] Specify fewer ext2 option flags (for old kernels)\n All of these are on by default (as appropriate)\n none Clear default options (all but journaling)\n dir_index Use htree indexes for large directories\n filetype Store file type info in directory entry\n has_journal Set by -j\n journal_dev Set by -J device=XXX\n sparse_super Don't allocate huge numbers of redundant superblocks\n\n"
#define HELP_getfattr "usage: getfattr [-d] [-h] [-n NAME] FILE...\n\nRead POSIX extended attributes.\n\n-d Show values as well as names.\n-h Do not dereference symbolic links.\n-n Show only attributes with the given name.\n\n"
-#define HELP_ftpget "usage: ftpget [-cv] [-u USER -p PASSWORD -P PORT] HOST_NAME [LOCAL_FILENAME] REMOTE_FILENAME\nusage: ftpput [-v] [-u USER -p PASSWORD -P PORT] HOST_NAME [REMOTE_FILENAME] LOCAL_FILENAME\n\nftpget - Get a remote file from FTP.\nftpput - Upload a local file on remote machine through FTP.\n\n-c Continue previous transfer.\n-v Verbose.\n-u User name.\n-p Password.\n-P Port Number (default 21).\n\n"
-
#define HELP_fsck "usage: fsck [-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]...\n\nCheck and repair filesystems\n\n-A Walk /etc/fstab and check all filesystems\n-N Don't execute, just show what would be done\n-P With -A, check filesystems in parallel\n-R With -A, skip the root filesystem\n-T Don't show title on startup\n-V Verbose\n-C n Write status information to specified filedescriptor\n-t TYPE List of filesystem types to check\n\n\n"
#define HELP_fold "usage: fold [-bsu] [-w WIDTH] [FILE...]\n\nFolds (wraps) or unfolds ascii text by adding or removing newlines.\nDefault line width is 80 columns for folding and infinite for unfolding.\n\n-b Fold based on bytes instead of columns\n-s Fold/unfold at whitespace boundaries if possible\n-u Unfold text (and refold if -w is given)\n-w Set lines to WIDTH columns or bytes\n\n"
#define HELP_dumpleases "usage: dumpleases [-r|-a] [-f LEASEFILE]\n\nDisplay DHCP leases granted by udhcpd\n-f FILE, Lease file\n-r Show remaining time\n-a Show expiration time\n\n"
+#define HELP_dmesg "usage: dmesg [-Cc] [-r|-t|-T] [-n LEVEL] [-s SIZE] [-w]\n\nPrint or control the kernel ring buffer.\n\n-C Clear ring buffer without printing\n-c Clear ring buffer after printing\n-n Set kernel logging LEVEL (1-9)\n-r Raw output (with <level markers>)\n-S Use syslog(2) rather than /dev/kmsg\n-s Show the last SIZE many bytes\n-T Show human-readable timestamps\n-t Don't print timestamps\n-w Keep waiting for more output (aka --follow)\n\n"
+
#define HELP_diff "usage: diff [-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2\n\n-a Treat all files as text\n-b Ignore changes in the amount of whitespace\n-B Ignore changes whose lines are all blank\n-d Try hard to find a smaller set of changes\n-i Ignore case differences\n-L Use LABEL instead of the filename in the unified header\n-N Treat absent files as empty\n-q Output only whether files differ\n-r Recurse\n-S Start with FILE when comparing directories\n-T Make tabs line up by prefixing a tab when necessary\n-s Report when two files are the same\n-t Expand tabs to spaces in output\n-U Output LINES lines of context\n-w Ignore all whitespace\n\n"
#define HELP_dhcpd "usage: dhcpd [-46fS] [-i IFACE] [-P N] [CONFFILE]\n\n -f Run in foreground\n -i Interface to use\n -S Log to syslog too\n -P N Use port N (default ipv4 67, ipv6 547)\n -4, -6 Run as a DHCPv4 or DHCPv6 server\n\n"
#define HELP_compress "usage: compress [-zgLR19] [FILE]\n\nCompress or decompress file (or stdin) using \"deflate\" algorithm.\n\n-1 min compression\n-9 max compression (default)\n-g gzip (default)\n-L zlib\n-R raw\n-z zip\n\n"
+#define HELP_chrt "usage: chrt [-m] [-p PID] [POLICY PRIO] [COMMAND [ARGS...]]\n\nGet/set a process' real-time (scheduling) attributes.\n\n-p Apply to given pid\n-R Set SCHED_RESET_ON_FORK\n-m Show min/max priorities available\n\nPolicies:\n -b SCHED_BATCH -f SCHED_FIFO -i SCHED_IDLE\n -o SCHED_OTHER -r SCHED_RR\n\n"
+
#define HELP_brctl "usage: brctl COMMAND [BRIDGE [INTERFACE]]\n\nManage ethernet bridges\n\nCommands:\nshow Show a list of bridges\naddbr BRIDGE Create BRIDGE\ndelbr BRIDGE Delete BRIDGE\naddif BRIDGE IFACE Add IFACE to BRIDGE\ndelif BRIDGE IFACE Delete IFACE from BRIDGE\nsetageing BRIDGE TIME Set ageing time\nsetfd BRIDGE TIME Set bridge forward delay\nsethello BRIDGE TIME Set hello time\nsetmaxage BRIDGE TIME Set max message age\nsetpathcost BRIDGE PORT COST Set path cost\nsetportprio BRIDGE PORT PRIO Set port priority\nsetbridgeprio BRIDGE PRIO Set bridge priority\nstp BRIDGE [1/yes/on|0/no/off] STP on/off\n\n"
#define HELP_bootchartd "usage: bootchartd {start [PROG ARGS]}|stop|init\n\nCreate /var/log/bootlog.tgz with boot chart data\n\nstart: start background logging; with PROG, run PROG,\n then kill logging with USR1\nstop: send USR1 to all bootchartd processes\ninit: start background logging; stop when getty/xdm is seen\n (for init scripts)\n\nUnder PID 1: as init, then exec $bootchart_init, /init, /sbin/init\n\n"
#define HELP_pkill "usage: pkill [-SIGNAL|-l SIGNAL] [PATTERN]\n\n-l Send SIGNAL (default SIGTERM)\n-V verbose\n\n"
-#define HELP_pgrep "usage: pgrep [-cL] [-d DELIM] [-L SIGNAL] [PATTERN]\n\nSearch for process(es). PATTERN is an extended regular expression checked\nagainst command names.\n\n-c Show only count of matches\n-d Use DELIM instead of newline\n-L Send SIGNAL instead of printing name\n-l Show command name\n\n"
+#define HELP_pgrep "usage: pgrep [-cl] [-d DELIM] [-L SIGNAL] [PATTERN]\n\nSearch for process(es). PATTERN is an extended regular expression checked\nagainst command names.\n\n-c Show only count of matches\n-d Use DELIM instead of newline\n-L Send SIGNAL instead of printing name\n-l Show command name\n\n"
#define HELP_top_common "usage: * [-bq] [-n NUMBER] [-d SECONDS] [-p PID,] [-u USER,]\n\n-b Batch mode (no tty)\n-d Delay SECONDS between each cycle (default 3)\n-n Exit after NUMBER iterations\n-p Show these PIDs\n-u Show these USERs\n-q Quiet (no header lines)\n\nCursor LEFT/RIGHT to change sort, UP/DOWN move list, space to force\nupdate, R to reverse sort, Q to exit.\n\n"
#define HELP_top "usage: top [-H] [-k FIELD,] [-o FIELD,] [-s SORT]\n\nShow process activity in real time.\n\n-H Show threads\n-k Fallback sort FIELDS (default -S,-%CPU,-ETIME,-PID)\n-o Show FIELDS (def PID,USER,PR,NI,VIRT,RES,SHR,S,%CPU,%MEM,TIME+,CMDLINE)\n-O Add FIELDS (replacing PR,NI,VIRT,RES,SHR,S from default)\n-s Sort by field number (1-X, default 9)\n\n"
-#define HELP_ps "usage: ps [-AadefLlnwZ] [-gG GROUP,] [-k FIELD,] [-o FIELD,] [-p PID,] [-t TTY,] [-uU USER,]\n\nList processes.\n\nWhich processes to show (selections may be comma separated lists):\n\n-A All processes\n-a Processes with terminals that aren't session leaders\n-d All processes that aren't session leaders\n-e Same as -A\n-g Belonging to GROUPs\n-G Belonging to real GROUPs (before sgid)\n-p PIDs (--pid)\n-P Parent PIDs (--ppid)\n-s In session IDs\n-t Attached to selected TTYs\n-T Show threads\n-u Owned by USERs\n-U Owned by real USERs (before suid)\n\nOutput modifiers:\n\n-k Sort FIELDs in +increasing or -decreasting order (--sort)\n-M Measure field widths (expanding as necessary)\n-n Show numeric USER and GROUP\n-w Wide output (don't truncate at terminal width)\n\nWhich FIELDs to show. (Default = -o PID,TTY,TIME,CMD)\n\n-f Full listing (-o USER:8=UID,PID,PPID,C,STIME,TTY,TIME,ARGS=CMD)\n-l Long listing (-o F,S,UID,PID,PPID,C,PRI,NI,ADDR,SZ,WCHAN,TTY,TIME,CMD)\n-o Output FIELDs instead of defaults, each with optional :size and =title\n-O Add FIELDS to defaults\n-Z Include LABEL\n\nCommand line -o fields:\n\n ARGS CMDLINE minus initial path CMD Command (thread) name (stat[2])\n CMDLINE Command line (argv[]) COMM Command filename (/proc/$PID/exe)\n COMMAND Command file (/proc/$PID/exe) NAME Process name (argv[0] of $PID)\n\nProcess attribute -o FIELDs:\n\n ADDR Instruction pointer BIT Is this process 32 or 64 bits\n CPU Which processor running on ETIME Elapsed time since PID start\n F Flags (1=FORKNOEXEC 4=SUPERPRIV) GID Group id\n GROUP Group name LABEL Security label\n MAJFL Major page faults MINFL Minor page faults\n NI Niceness (lower is faster)\n PCPU Percentage of CPU time used PCY Android scheduling policy\n PGID Process Group ID\n PID Process ID PPID Parent Process ID\n PRI Priority (higher is faster) PSR Processor last executed on\n RGID Real (before sgid) group ID RGROUP Real (before sgid) group name\n RSS Resident Set Size (pages in use) RTPRIO Realtime priority\n RUID Real (before suid) user ID RUSER Real (before suid) user name\n S Process state:\n R (running) S (sleeping) D (device I/O) T (stopped) t (traced)\n Z (zombie) X (deader) x (dead) K (wakekill) W (waking)\n SCHED Scheduling policy (0=other, 1=fifo, 2=rr, 3=batch, 4=iso, 5=idle)\n STAT Process state (S) plus:\n < high priority N low priority L locked memory\n s session leader + foreground l multithreaded\n STIME Start time of process in hh:mm (size :19 shows yyyy-mm-dd hh:mm:ss)\n SZ Memory Size (4k pages needed to completely swap out process)\n TCNT Thread count TID Thread ID\n TIME CPU time consumed TTY Controlling terminal\n UID User id USER User name\n VSZ Virtual memory size (1k units) %VSZ VSZ as % of physical memory\n WCHAN What are we waiting in kernel for\n\n"
+#define HELP_ps "usage: ps [-AadefLlnwZ] [-gG GROUP,] [-k FIELD,] [-o FIELD,] [-p PID,] [-t TTY,] [-uU USER,]\n\nList processes.\n\nWhich processes to show (selections may be comma separated lists):\n\n-A All processes\n-a Processes with terminals that aren't session leaders\n-d All processes that aren't session leaders\n-e Same as -A\n-g Belonging to GROUPs\n-G Belonging to real GROUPs (before sgid)\n-p PIDs (--pid)\n-P Parent PIDs (--ppid)\n-s In session IDs\n-t Attached to selected TTYs\n-T Show threads\n-u Owned by USERs\n-U Owned by real USERs (before suid)\n\nOutput modifiers:\n\n-k Sort FIELDs in +increasing or -decreasting order (--sort)\n-M Measure field widths (expanding as necessary)\n-n Show numeric USER and GROUP\n-w Wide output (don't truncate fields)\n\nWhich FIELDs to show. (Default = -o PID,TTY,TIME,CMD)\n\n-f Full listing (-o USER:12=UID,PID,PPID,C,STIME,TTY,TIME,ARGS=CMD)\n-l Long listing (-o F,S,UID,PID,PPID,C,PRI,NI,ADDR,SZ,WCHAN,TTY,TIME,CMD)\n-o Output FIELDs instead of defaults, each with optional :size and =title\n-O Add FIELDS to defaults\n-Z Include LABEL\n\nCommand line -o fields:\n\n ARGS CMDLINE minus initial path CMD Command (thread) name (stat[2])\n CMDLINE Command line (argv[]) COMM Command filename (/proc/$PID/exe)\n COMMAND Command file (/proc/$PID/exe) NAME Process name (argv[0] of $PID)\n\nProcess attribute -o FIELDs:\n\n ADDR Instruction pointer BIT Is this process 32 or 64 bits\n CPU Which processor running on ETIME Elapsed time since PID start\n F Flags (1=FORKNOEXEC 4=SUPERPRIV) GID Group id\n GROUP Group name LABEL Security label\n MAJFL Major page faults MINFL Minor page faults\n NI Niceness (lower is faster)\n PCPU Percentage of CPU time used PCY Android scheduling policy\n PGID Process Group ID\n PID Process ID PPID Parent Process ID\n PRI Priority (higher is faster) PSR Processor last executed on\n RGID Real (before sgid) group ID RGROUP Real (before sgid) group name\n RSS Resident Set Size (pages in use) RTPRIO Realtime priority\n RUID Real (before suid) user ID RUSER Real (before suid) user name\n S Process state:\n R (running) S (sleeping) D (device I/O) T (stopped) t (traced)\n Z (zombie) X (deader) x (dead) K (wakekill) W (waking)\n SCHED Scheduling policy (0=other, 1=fifo, 2=rr, 3=batch, 4=iso, 5=idle)\n STAT Process state (S) plus:\n < high priority N low priority L locked memory\n s session leader + foreground l multithreaded\n STIME Start time of process in hh:mm (size :19 shows yyyy-mm-dd hh:mm:ss)\n SZ Memory Size (4k pages needed to completely swap out process)\n TCNT Thread count TID Thread ID\n TIME CPU time consumed TTY Controlling terminal\n UID User id USER User name\n VSZ Virtual memory size (1k units) %VSZ VSZ as % of physical memory\n WCHAN What are we waiting in kernel for\n\n"
#define HELP_printf "usage: printf FORMAT [ARGUMENT...]\n\nFormat and print ARGUMENT(s) according to FORMAT, using C printf syntax\n(% escapes for cdeEfgGiosuxX, \\ escapes for abefnrtv0 or \\OCTAL or \\xHEX).\n\n"
#define HELP_patch "usage: patch [-d DIR] [-i file] [-p depth] [-Rlu] [--dry-run]\n\nApply a unified diff to one or more files.\n\n-d modify files in DIR\n-i Input file (defaults=stdin)\n-l Loose match (ignore whitespace)\n-p Number of '/' to strip from start of file paths (default=all)\n-R Reverse patch.\n-u Ignored (only handles \"unified\" diffs)\n--dry-run Don't change files, just confirm patch applies\n\nThis version of patch only handles unified diffs, and only modifies\na file when all all hunks to that file apply. Patch prints failed\nhunks to stderr, and exits with nonzero status if any hunks fail.\n\nA file compared against /dev/null (or with a date <= the epoch) is\ncreated/deleted as appropriate.\n\n"
-#define HELP_paste "usage: paste [-s] [-d list] [file...]\n\nReplace newlines in files.\n\n-d list list of delimiters to separate lines\n-s process files sequentially instead of in parallel\n\nBy default print corresponding lines separated by <tab>.\n\n"
+#define HELP_paste "usage: paste [-s] [-d DELIMITERS] [FILE...]\n\nMerge corresponding lines from each input file.\n\n-d list of delimiter characters to separate fields with (default is \\t)\n-s sequential mode: turn each input file into one line of output\n\n"
#define HELP_od "usage: od [-bcdosxv] [-j #] [-N #] [-w #] [-A doxn] [-t acdfoux[#]]\n\n-A Address base (decimal, octal, hexdecimal, none)\n-j Skip this many bytes of input\n-N Stop dumping after this many bytes\n-t Output type a(scii) c(har) d(ecimal) f(loat) o(ctal) u(nsigned) (he)x\n plus optional size in bytes\n aliases: -b=-t o1, -c=-t c, -d=-t u2, -o=-t o2, -s=-t d2, -x=-t x2\n-v Don't collapse repeated lines together\n-w Total line width in bytes (default 16).\n\n"
#define HELP_mkdir "usage: mkdir [-vp] [-m mode] [dirname...]\n\nCreate one or more directories.\n\n-m set permissions of directory to mode.\n-p make parent directories as needed.\n-v verbose\n\n"
-#define HELP_ls_color "--color device=yellow symlink=turquoise/red dir=blue socket=purple\n files: exe=green suid=red suidfile=redback stickydir=greenback\n =auto means detect if output is a tty.\n\nusage: ls --color[=auto] [-ACFHLRSZacdfhiklmnpqrstux1] [directory...]\n\nlist files\n\nwhat to show:\n-a all files including .hidden -b escape nongraphic chars\n-c use ctime for timestamps -d directory, not contents\n-i inode number -k block sizes in kilobytes\n-p put a '/' after dir names -q unprintable chars as '?'\n-s size (in blocks) -u use access time for timestamps\n-A list all files but . and .. -H follow command line symlinks\n-L follow symlinks -R recursively list files in subdirs\n-F append /dir *exe @sym |FIFO -Z security context\n\noutput formats:\n-1 list one file per line -C columns (sorted vertically)\n-g like -l but no owner -h human readable sizes\n-l long (show full details) -m comma separated\n-n like -l but numeric uid/gid -o like -l but no group\n-x columns (horizontal sort)\n\nsorting (default is alphabetical):\n-f unsorted -r reverse -t timestamp -S size\n"
+#define HELP_ls_color "--color device=yellow symlink=turquoise/red dir=blue socket=purple\n files: exe=green suid=red suidfile=redback stickydir=greenback\n =auto means detect if output is a tty.\n\nusage: ls --color[=auto] [-ACFHLRSZacdfhiklmnpqrstux1] [directory...]\n\nlist files\n\nwhat to show:\n-a all files including .hidden -b escape nongraphic chars\n-c use ctime for timestamps -d directory, not contents\n-i inode number -p put a '/' after dir names\n-q unprintable chars as '?' -s storage used (1024 byte units)\n-u use access time for timestamps -A list all files but . and ..\n-H follow command line symlinks -L follow symlinks\n-R recursively list in subdirs -F append /dir *exe @sym |FIFO\n-Z security context\n\noutput formats:\n-1 list one file per line -C columns (sorted vertically)\n-g like -l but no owner -h human readable sizes\n-l long (show full details) -m comma separated\n-n like -l but numeric uid/gid -o like -l but no group\n-x columns (horizontal sort) -ll long with nanoseconds (--full-time)\n\nsorting (default is alphabetical):\n-f unsorted -r reverse -t timestamp -S size\n"
-#define HELP_ls "usage: ls --color[=auto] [-ACFHLRSZacdfhiklmnpqrstux1] [directory...]\n\nlist files\n\nwhat to show:\n-a all files including .hidden -b escape nongraphic chars\n-c use ctime for timestamps -d directory, not contents\n-i inode number -k block sizes in kilobytes\n-p put a '/' after dir names -q unprintable chars as '?'\n-s size (in blocks) -u use access time for timestamps\n-A list all files but . and .. -H follow command line symlinks\n-L follow symlinks -R recursively list files in subdirs\n-F append /dir *exe @sym |FIFO -Z security context\n\noutput formats:\n-1 list one file per line -C columns (sorted vertically)\n-g like -l but no owner -h human readable sizes\n-l long (show full details) -m comma separated\n-n like -l but numeric uid/gid -o like -l but no group\n-x columns (horizontal sort)\n\nsorting (default is alphabetical):\n-f unsorted -r reverse -t timestamp -S size\n--color device=yellow symlink=turquoise/red dir=blue socket=purple\n files: exe=green suid=red suidfile=redback stickydir=greenback\n =auto means detect if output is a tty.\n\n"
+#define HELP_ls "usage: ls --color[=auto] [-ACFHLRSZacdfhiklmnpqrstux1] [directory...]\n\nlist files\n\nwhat to show:\n-a all files including .hidden -b escape nongraphic chars\n-c use ctime for timestamps -d directory, not contents\n-i inode number -p put a '/' after dir names\n-q unprintable chars as '?' -s storage used (1024 byte units)\n-u use access time for timestamps -A list all files but . and ..\n-H follow command line symlinks -L follow symlinks\n-R recursively list in subdirs -F append /dir *exe @sym |FIFO\n-Z security context\n\noutput formats:\n-1 list one file per line -C columns (sorted vertically)\n-g like -l but no owner -h human readable sizes\n-l long (show full details) -m comma separated\n-n like -l but numeric uid/gid -o like -l but no group\n-x columns (horizontal sort) -ll long with nanoseconds (--full-time)\n\nsorting (default is alphabetical):\n-f unsorted -r reverse -t timestamp -S size\n--color device=yellow symlink=turquoise/red dir=blue socket=purple\n files: exe=green suid=red suidfile=redback stickydir=greenback\n =auto means detect if output is a tty.\n\n"
#define HELP_ln "usage: ln [-sfnv] [FROM...] TO\n\nCreate a link between FROM and TO.\nWith only one argument, create link in current directory.\n\n-s Create a symbolic link\n-f Force the creation of the link, even if TO already exists\n-n Symlink at destination treated as file\n-v Verbose\n\n"
#define HELP_grep "usage: grep [-EFivwcloqsHbhn] [-A NUM] [-m MAX] [-e REGEX]... [-f REGFILE] [FILE]...\n\nShow lines matching regular expressions. If no -e, first argument is\nregular expression to match. With no files (or \"-\" filename) read stdin.\nReturns 0 if matched, 1 if no match found.\n\n-e Regex to match. (May be repeated.)\n-f File containing regular expressions to match.\n\nmatch type:\n-A Show NUM lines after -B Show NUM lines before match\n-C NUM lines context (A+B) -E extended regex syntax\n-F fixed (literal match) -i case insensitive\n-m match MAX many lines -r recursive (on dir)\n-v invert match -w whole word (implies -E)\n-x whole line -z input NUL terminated\n\ndisplay modes: (default: matched line)\n-c count of matching lines -l show matching filenames\n-o only matching part -q quiet (errors only)\n-s silent (no error msg) -Z output NUL terminated\n\noutput prefix (default: filename if checking more than 1 file)\n-H force filename -b byte offset of match\n-h hide filename -n line number of match\n\n"
-#define HELP_find "usage: find [-HL] [DIR...] [<options>]\n\nSearch directories for matching files.\nDefault: search \".\" match all -print all matches.\n\n-H Follow command line symlinks -L Follow all symlinks\n\nMatch filters:\n-name PATTERN filename with wildcards -iname case insensitive -name\n-path PATTERN path name with wildcards -ipath case insensitive -path\n-user UNAME belongs to user UNAME -nouser user ID not known\n-group GROUP belongs to group GROUP -nogroup group ID not known\n-perm [-/]MODE permissions (-=min /=any) -prune ignore contents of dir\n-size N[c] 512 byte blocks (c=bytes) -xdev only this filesystem\n-links N hardlink count -atime N accessed N days ago\n-ctime N created N days ago -mtime N modified N days ago\n-newer FILE newer mtime than FILE -mindepth # at least # dirs down\n-depth ignore contents of dir -maxdepth # at most # dirs down\n-inum N inode number N -empty empty files and dirs\n-type [bcdflps] (block, char, dir, file, symlink, pipe, socket)\n\nNumbers N may be prefixed by a - (less than) or + (greater than):\n\nCombine matches with:\n!, -a, -o, ( ) not, and, or, group expressions\n\nActions:\n-print Print match with newline -print0 Print match with null\n-exec Run command with path -execdir Run command in file's dir\n-ok Ask before exec -okdir Ask before execdir\n-delete Remove matching file/dir\n\nCommands substitute \"{}\" with matched file. End with \";\" to run each file,\nor \"+\" (next argument after \"{}\") to collect and run with multiple files.\n\n"
+#define HELP_find "usage: find [-HL] [DIR...] [<options>]\n\nSearch directories for matching files.\nDefault: search \".\" match all -print all matches.\n\n-H Follow command line symlinks -L Follow all symlinks\n\nMatch filters:\n-name PATTERN filename with wildcards -iname case insensitive -name\n-path PATTERN path name with wildcards -ipath case insensitive -path\n-user UNAME belongs to user UNAME -nouser user ID not known\n-group GROUP belongs to group GROUP -nogroup group ID not known\n-perm [-/]MODE permissions (-=min /=any) -prune ignore contents of dir\n-size N[c] 512 byte blocks (c=bytes) -xdev only this filesystem\n-links N hardlink count -atime N[u] accessed N units ago\n-ctime N[u] created N units ago -mtime N[u] modified N units ago\n-newer FILE newer mtime than FILE -mindepth # at least # dirs down\n-depth ignore contents of dir -maxdepth # at most # dirs down\n-inum N inode number N -empty empty files and dirs\n-type [bcdflps] (block, char, dir, file, symlink, pipe, socket)\n\nNumbers N may be prefixed by a - (less than) or + (greater than). Units for\n-Xtime are d (days, default), h (hours), m (minutes), or s (seconds).\n\nCombine matches with:\n!, -a, -o, ( ) not, and, or, group expressions\n\nActions:\n-print Print match with newline -print0 Print match with null\n-exec Run command with path -execdir Run command in file's dir\n-ok Ask before exec -okdir Ask before execdir\n-delete Remove matching file/dir\n\nCommands substitute \"{}\" with matched file. End with \";\" to run each file,\nor \"+\" (next argument after \"{}\") to collect and run with multiple files.\n\n"
-#define HELP_file "usage: file [file...]\n\nExamine the given files and describe their content types.\n\n"
+#define HELP_file "usage: file [-hL] [file...]\n\nExamine the given files and describe their content types.\n\n-h don't follow symlinks (default)\n-L follow symlinks\n\n"
#define HELP_false "Return nonzero.\n\n"
#define HELP_dirname "usage: dirname PATH\n\nShow directory portion of path.\n\n"
-#define HELP_df "usage: df [-HPkh] [-t type] [FILESYSTEM ...]\n\nThe \"disk free\" command shows total/used/available disk space for\neach filesystem listed on the command line, or all currently mounted\nfilesystems.\n\n-P The SUSv3 \"Pedantic\" option\n-k Sets units back to 1024 bytes (the default without -P)\n-h Human readable output (K=1024)\n-H Human readable output (k=1000)\n-t type Display only filesystems of this type.\n\nPedantic provides a slightly less useful output format dictated by Posix,\nand sets the units to 512 bytes instead of the default 1024 bytes.\n\n"
+#define HELP_df "usage: df [-HPkh] [-t type] [FILESYSTEM ...]\n\nThe \"disk free\" command shows total/used/available disk space for\neach filesystem listed on the command line, or all currently mounted\nfilesystems.\n\n-a Show all (including /proc and friends)\n-P The SUSv3 \"Pedantic\" option\n-k Sets units back to 1024 bytes (the default without -P)\n-h Human readable output (K=1024)\n-H Human readable output (k=1000)\n-t type Display only filesystems of this type.\n\nPedantic provides a slightly less useful output format dictated by Posix,\nand sets the units to 512 bytes instead of the default 1024 bytes.\n\n"
-#define HELP_date "usage: date [-u] [-r FILE] [-d DATE] [+DISPLAY_FORMAT] [-D SET_FORMAT] [SET]\n\nSet/get the current date/time. With no SET shows the current date.\n\nDefault SET format is \"MMDDhhmm[[CC]YY][.ss]\", that's (2 digits each)\nmonth, day, hour (0-23), and minute. Optionally century, year, and second.\nAlso accepts \"@UNIXTIME[.FRACTION]\" as seconds since midnight Jan 1 1970.\n\n-d Show DATE instead of current time (convert date format)\n-D +FORMAT for SET or -d (instead of MMDDhhmm[[CC]YY][.ss])\n-r Use modification time of FILE instead of current date\n-u Use UTC instead of current timezone\n\n+FORMAT specifies display format string using these escapes:\n\n%% literal % %n newline %t tab\n%S seconds (00-60) %M minute (00-59) %m month (01-12)\n%H hour (0-23) %I hour (01-12) %p AM/PM\n%y short year (00-99) %Y year %C century\n%a short weekday name %A weekday name %u day of week (1-7, 1=mon)\n%b short month name %B month name %Z timezone name\n%j day of year (001-366) %d day of month (01-31) %e day of month ( 1-31)\n%s seconds past the Epoch\n\n%U Week of year (0-53 start sunday) %W Week of year (0-53 start monday)\n%V Week of year (1-53 start monday, week < 4 days not part of this year)\n\n%D = \"%m/%d/%y\" %r = \"%I : %M : %S %p\" %T = \"%H:%M:%S\" %h = \"%b\"\n%x locale date %X locale time %c locale date/time\n\n"
+#define HELP_date "usage: date [-u] [-r FILE] [-d DATE] [+DISPLAY_FORMAT] [-D SET_FORMAT] [SET]\n\nSet/get the current date/time. With no SET shows the current date.\n\nDefault SET format is \"MMDDhhmm[[CC]YY][.ss]\", that's (2 digits each)\nmonth, day, hour (0-23), and minute. Optionally century, year, and second.\nAlso accepts \"@UNIXTIME[.FRACTION]\" as seconds since midnight Jan 1 1970.\n\n-d Show DATE instead of current time (convert date format)\n-D +FORMAT for SET or -d (instead of MMDDhhmm[[CC]YY][.ss])\n-r Use modification time of FILE instead of current date\n-u Use UTC instead of current timezone\n\n+FORMAT specifies display format string using these escapes:\n\n%% literal % %n newline %t tab\n%S seconds (00-60) %M minute (00-59) %m month (01-12)\n%H hour (0-23) %I hour (01-12) %p AM/PM\n%y short year (00-99) %Y year %C century\n%a short weekday name %A weekday name %u day of week (1-7, 1=mon)\n%b short month name %B month name %Z timezone name\n%j day of year (001-366) %d day of month (01-31) %e day of month ( 1-31)\n\n%U Week of year (0-53 start sunday) %W Week of year (0-53 start monday)\n%V Week of year (1-53 start monday, week < 4 days not part of this year)\n\n%D = \"%m/%d/%y\" %r = \"%I : %M : %S %p\" %T = \"%H:%M:%S\" %h = \"%b\"\n%x locale date %X locale time %c locale date/time\n\n"
#define HELP_cut "usage: cut OPTION... [FILE]...\n\nPrint selected parts of lines from each FILE to standard output.\n\n-b LIST select only these bytes from LIST.\n-c LIST select only these characters from LIST.\n-f LIST select only these fields.\n-d DELIM use DELIM instead of TAB for field delimiter.\n-s do not print lines not containing delimiters.\n-n don't split multibyte characters (Ignored).\n\n"
OSDN Git Service
