[Doc] GITLOG to v1.0beta1.1.

[openi2cradio/OpenI2CRadio.git] / idle.c

diff --git a/idle.c b/idle.c
index 312ff1b..1e2fbc9 100644 (file)
--- a/idle.c
+++ b/idle.c
@@ -26,17 +26,27 @@
  *  This exception does not however invalidate any other reasons why
  *  the executable file might be covered by the GNU General Public License.
  */
+#if defined(__SDCC)
 #include <sdcc-lib.h>
 #include <pic18fregs.h> /* ONLY FOR PIC18x */
+#else
+#include <htc.h>
+#endif
 #include <signal.h>
 #include "iodef.h"
 
 
 void idle_init(void)
 {
-   INTCON = INTCON & ~(_TMR0IF | _INT0IF | _RBIF); // Enable tmr0 as interrupt and clear interrupt flags.
-   INTCON2 = ~_TMR0IP & _TMR0IP; // Interrupt is lower.
+    RCONbits.IPEN = 1;
+//    INTCONbits.GIE = 1;
 
+    INTCONbits.TMR0IF = 0;
+    INTCONbits.TMR0IE =  1;
+//    INTCONbits.RBIF = 0;
+    INTCON2bits.TMR0IP = 0;
+//   INTCON = INTCON & ~(_TMR0IF |  _RBIF); // Enable tmr0 as interrupt and clear interrupt flags.
+//   INTCON2 = ~_TMR0IP & _TMR0IP; // Interrupt is lower.
    WDTCON = 1; // OK? WDT=Disabled.
 }
 
@@ -49,24 +59,57 @@ void stop_idle(void)
 
 void idle(unsigned int initial)
 {
-   unsigned char osccon;
-   unsigned char  contword;
 
+    unsigned int i;
+   WDTCONbits.SWDTEN = 0; // Lame WDT OFF.
    /* Enable IDLE */
-   osccon = OSCCON;
-   osccon = osccon | _IDLEN;
-   OSCCON = osccon;
-   INTCON &= ~_TMR0IF;
-   INTCON |= _TMR0IE; // Enable tmr0 as interrupt and clear interrupt flags.
-   
    /* Set TMR0 for interrupt*/
-   /* Pre-scaler: 1/16, PSA=0(ON), TOSE=0, T0CS=0(INTERNAL), T08BIT=0(16bit), TMR0ON=1(START) */
-   contword = _T0PS0 | _T0PS1 | _T0PS2 | _TMR0ON; // Prescaler = 1:256.
-   //contword =  _T0PS2 | _TMR0ON; // Pre-scakler is 1:32.
-   //TMR0H = initial >> 8;
+   /* Pre-scaler: 1/2, PSA=1(ON), TOSE=0, T0CS=0(INTERNAL), T08BIT=0(16bit), TMR0ON=1(START) */
+   /* 1Tick = 1/1000 ms*/
+   T0CON = 0b00001000; // 1/2
+   OSCCONbits.IDLEN = 1;
+   INTCONbits.TMR0IF = 0;
+//   TMR0H = initial >> 8; // Write order : L->H
+   TMR0H = initial >> 8; // Write order : H->L
    TMR0L = initial & 0xff;
-   TMR0H = initial >> 8; // Write order : L->H
-   T0CON = contword;
-   
-   Sleep();
+   T0CONbits.TMR0ON = 1; // Start
+  do {
+       Sleep();
+//       i = TMR0H << 8 + TMR0L; // Check if IDLE-Timer was elapsed.
+   } while(INTCONbits.TMR0IF == 0); // Dead area : 0-2.
+   INTCONbits.TMR0IF = 0;
+   WDTCONbits.SWDTEN = 1; // WDT ON.
+}
+
+
+void idle_time_ms(unsigned int ms)
+{
+    unsigned int tim;
+    unsigned int upper;
+
+    if(ms == 0) return;
+    upper = (ms & 0xffc0) >> 6;
+//    tim = ms * 8 - ms / 16 - ms / 8;
+    tim = (ms   & 0x3f) * 1000; //
+    tim = (65535 - tim) + 1; // tim = 65536 - tim;
+    while(upper > 0) {
+        idle(65535 - 64000 + 1); // Upper is 512ms
+        upper--;
+    }
+    idle(tim);
+}
+
+void idle_time_62_5ms(void)
+{
+    // Tim = 1ms * 64 - 1ms - 0.5ms
+    // Tim = 0.128ms * (488 + 2.2)
+    //     =
+    idle_time_ms(62); // 62ms
+    idle(500); // 500us
+}
+
+void idle_time_35ms(void)
+{
+    // Tim = 35 / 0.128 = 273.44
+    idle_time_ms(35);
 }