#endif
#include "data_types.h"
-
-#ifndef BTIF_HSAG_SERVICE_NAME
-#define BTIF_HSAG_SERVICE_NAME ("Headset Gateway")
-#endif
-
-#ifndef BTIF_HFAG_SERVICE_NAME
-#define BTIF_HFAG_SERVICE_NAME ("Handsfree Gateway")
-#endif
-
-#ifndef BTIF_HF_CLIENT_SERVICE_NAME
-#define BTIF_HF_CLIENT_SERVICE_NAME ("Handsfree")
-#endif
-
#ifdef BUILDCFG
#if !defined(HAS_BDROID_BUILDCFG) && !defined(HAS_NO_BDROID_BUILDCFG)
#include "bdroid_buildcfg.h"
#endif
-#endif
+#endif // BUILDCFG
/* Include common GKI definitions used by this platform */
#include "gki_target.h"
#include "bt_types.h" /* This must be defined AFTER buildcfg.h */
#include "dyn_mem.h" /* defines static and/or dynamic memory for components */
-
//------------------Added from bdroid_buildcfg.h---------------------
-#ifndef UNV_INCLUDED
-#define UNV_INCLUDED FALSE
-#endif
-
-#ifndef GATT_PTS
-#define GATT_PTS FALSE
-#endif
-
-#ifndef L2CAP_INCLUDED
-#define L2CAP_INCLUDED TRUE
-#endif
-
#ifndef L2CAP_EXTFEA_SUPPORTED_MASK
#define L2CAP_EXTFEA_SUPPORTED_MASK (L2CAP_EXTFEA_ENH_RETRANS | L2CAP_EXTFEA_STREAM_MODE | L2CAP_EXTFEA_NO_CRC | L2CAP_EXTFEA_FIXED_CHNLS)
#endif
#define BTA_RFC_MTU_SIZE (L2CAP_MTU_SIZE-L2CAP_MIN_OFFSET-RFCOMM_DATA_OVERHEAD)
#endif
-#ifndef BTA_DUN_MTU
-#define BTA_DUN_MTU BTA_RFC_MTU_SIZE
-#endif
-
-#ifndef BTA_SPP_MTU
-#define BTA_SPP_MTU BTA_RFC_MTU_SIZE
-#endif
-
-#ifndef BTA_FAX_MTU
-#define BTA_FAX_MTU BTA_RFC_MTU_SIZE
-#endif
-
-#ifndef SDP_RAW_PDU_INCLUDED
-#define SDP_RAW_PDU_INCLUDED TRUE
-#endif
-
-#ifndef GATTS_APPU_USE_GATT_TRACE
-#define GATTS_APPU_USE_GATT_TRACE FALSE
-#endif
-
-#ifndef SMP_HOST_ENCRYPT_INCLUDED
-#define SMP_HOST_ENCRYPT_INCLUDED FALSE
-#endif
-
#ifndef SBC_NO_PCM_CPY_OPTION
#define SBC_NO_PCM_CPY_OPTION FALSE
#endif
#define BTA_AG_INCLUDED TRUE
#endif
-#ifndef BTA_DM_INCLUDED
-#define BTA_DM_INCLUDED TRUE
-#endif
-
-
-#ifndef BTA_DI_INCLUDED
-#define BTA_DI_INCLUDED FALSE
-#endif
-
#ifndef BTA_BI_INCLUDED
#define BTA_BI_INCLUDED FALSE
#endif
#define BTA_PAN_INCLUDED TRUE
#endif
-#ifndef BTA_FS_INCLUDED
-#define BTA_FS_INCLUDED TRUE
-#endif
-
#ifndef BTA_HH_INCLUDED
#define BTA_HH_INCLUDED TRUE
#endif
#define BTA_GATT_INCLUDED TRUE
#endif
-/* defined BTA_AVK_INCLUDED in Android.mk file based on target selected*/
+#ifndef BTA_AV_SINK_INCLUDED
+#define BTA_AV_SINK_INCLUDED FALSE
+#endif
#ifndef BTA_DISABLE_DELAY
#define BTA_DISABLE_DELAY 200 /* in milliseconds */
#endif
-#ifndef RPC_TRACE_ONLY
-#define RPC_TRACE_ONLY FALSE
-#endif
-
#ifndef ANDROID_APP_INCLUDED
#define ANDROID_APP_INCLUDED TRUE
#endif
#define ANDROID_USE_LOGCAT TRUE
#endif
-#ifndef LINUX_GKI_INCLUDED
-#define LINUX_GKI_INCLUDED TRUE
+// If the next wakeup time is less than this threshold, we should acquire
+// a wakelock instead of setting a wake alarm so we're not bouncing in
+// and out of suspend frequently.
+// in millisecond
+// TODO(zachoverflow): reinstate in alarm code
+#ifndef GKI_TIMER_INTERVAL_FOR_WAKELOCK
+#define GKI_TIMER_INTERVAL_FOR_WAKELOCK 3000
#endif
#ifndef BTA_SYS_TIMER_PERIOD
#define GKI_SHUTDOWN_EVT APPL_EVT_7
#endif
-#ifndef GKI_PTHREAD_JOINABLE
-#define GKI_PTHREAD_JOINABLE TRUE
-#endif
-
-#ifndef LINUX_DRV_INCLUDED
-#define LINUX_DRV_INCLUDED TRUE
-#endif
-
-#ifndef LINUX_OS
-#define LINUX_OS TRUE
-#endif
-
-#ifndef BTM_APP_DEV_INIT
-#define BTM_APP_DEV_INIT bte_main_post_reset_init
-#endif
-
#ifndef SBC_FOR_EMBEDDED_LINUX
#define SBC_FOR_EMBEDDED_LINUX TRUE
#endif
-#ifndef BTA_DM_REMOTE_DEVICE_NAME_LENGTH
-#define BTA_DM_REMOTE_DEVICE_NAME_LENGTH 248
-#endif
-
#ifndef AVDT_VERSION
#define AVDT_VERSION 0x0102
#endif
#define BTA_AV_CO_CP_SCMS_T FALSE
#endif
-#ifndef AVDT_CONNECT_CP_ONLY
-#define AVDT_CONNECT_CP_ONLY FALSE
-#endif
-
/* This feature is used to eanble interleaved scan*/
#ifndef BTA_HOST_INTERLEAVE_SEARCH
#define BTA_HOST_INTERLEAVE_SEARCH FALSE
#endif
-/* This feature is used to skip query of ble read remote features*/
-#ifndef BTA_SKIP_BLE_READ_REMOTE_FEAT
-#define BTA_SKIP_BLE_READ_REMOTE_FEAT FALSE
-#endif
-
-#ifndef BT_TRACE_PROTOCOL
-#define BT_TRACE_PROTOCOL TRUE
-#endif
-
#ifndef BT_USE_TRACES
#define BT_USE_TRACES TRUE
#endif
#define BT_TRACE_BTIF TRUE
#endif
-#ifndef BTTRC_INCLUDED
-#define BTTRC_INCLUDED FALSE
-#endif
-
#ifndef BT_TRACE_VERBOSE
#define BT_TRACE_VERBOSE FALSE
#endif
-#ifndef BTTRC_PARSER_INCLUDED
-#define BTTRC_PARSER_INCLUDED FALSE
-#endif
-
-#ifndef MAX_TRACE_RAM_SIZE
-#define MAX_TRACE_RAM_SIZE 10000
-#endif
-
-#ifndef OBX_INITIAL_TRACE_LEVEL
-#define OBX_INITIAL_TRACE_LEVEL BT_TRACE_LEVEL_ERROR
-#endif
-
-#ifndef PBAP_ZERO_VCARD_IN_DB
-#define PBAP_ZERO_VCARD_IN_DB FALSE
-#endif
-
#ifndef BTA_DM_SDP_DB_SIZE
#define BTA_DM_SDP_DB_SIZE 8000
#endif
#define BTIF_DM_OOB_TEST TRUE
#endif
-//------------------End added from bdroid_buildcfg.h---------------------
-
-
-
-/******************************************************************************
-**
-** Platform-Specific
-**
-******************************************************************************/
+// How long to wait before activating sniff mode after entering the
+// idle state for FTS, OPS connections
+#ifndef BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS
+#define BTA_FTS_OPS_IDLE_TO_SNIFF_DELAY_MS 7000
+#endif
-/* API macros for simulator */
-
-#define BTAPI
-
-#ifndef BTE_BSE_WRAPPER
-#ifdef BTE_SIM_APP
-#undef BTAPI
-#define BTAPI __declspec(dllexport)
-#endif
-#endif
-
-#define BT_API BTAPI
-#define BTU_API BTAPI
-#define A2D_API BTAPI
-#define VDP_API BTAPI
-#define AVDT_API BTAPI
-#define AVCT_API BTAPI
-#define AVRC_API BTAPI
-#define BIP_API BTAPI
-#define BNEP_API BTAPI
-#define BPP_API BTAPI
-#define BTM_API BTAPI
-#define CTP_API BTAPI
-#define DUN_API BTAPI
-#define FTP_API BTAPI
-#define GAP_API BTAPI
-#define GOEP_API BTAPI
-#define HCI_API BTAPI
-#define HCRP_API BTAPI
-#define HID_API BTAPI
-#define HFP_API BTAPI
-#define HSP2_API BTAPI
-#define ICP_API BTAPI
-#define L2C_API BTAPI
-#define OBX_API BTAPI
-#define OPP_API BTAPI
-#define PAN_API BTAPI
-#define RFC_API BTAPI
-#define RPC_API BTAPI
-#define SDP_API BTAPI
-#define SPP_API BTAPI
-#define TCS_API BTAPI
-#define XML_API BTAPI
-#define BTA_API BTAPI
-#define SBC_API BTAPI
-#define MCE_API BTAPI
-#define MCA_API BTAPI
-#define GATT_API BTAPI
-#define SMP_API BTAPI
+//------------------End added from bdroid_buildcfg.h---------------------
/******************************************************************************
#define HCI_ACL_POOL_ID GKI_POOL_ID_3
#endif
-#ifndef HCI_ACL_POOL_BUF_SIZE
-#define HCI_ACL_POOL_BUF_SIZE GKI_BUF3_SIZE
-#endif
-
/* Maximum number of buffers available for ACL receive data. */
#ifndef HCI_ACL_BUF_MAX
#define HCI_ACL_BUF_MAX GKI_BUF3_MAX
#define HCI_SCO_POOL_ID GKI_POOL_ID_6
#endif
-/* Not used. */
-#ifndef HCI_DATA_DESCR_POOL_ID
-#define HCI_DATA_DESCR_POOL_ID GKI_POOL_ID_0
-#endif
-
/* Sends SDP data packets. */
#ifndef SDP_POOL_ID
#define SDP_POOL_ID 3
#define RFCOMM_CMD_POOL_ID GKI_POOL_ID_2
#endif
-#ifndef RFCOMM_CMD_POOL_BUF_SIZE
-#define RFCOMM_CMD_POOL_BUF_SIZE GKI_BUF2_SIZE
-#endif
-
/* Sends RFCOMM data packets. */
#ifndef RFCOMM_DATA_POOL_ID
#define RFCOMM_DATA_POOL_ID GKI_POOL_ID_3
#define BTM_CMD_POOL_ID GKI_POOL_ID_2
#endif
-#ifndef OBX_CMD_POOL_SIZE
-#define OBX_CMD_POOL_SIZE GKI_BUF2_SIZE
-#endif
-
#ifndef OBX_LRG_DATA_POOL_SIZE
#define OBX_LRG_DATA_POOL_SIZE GKI_BUF4_SIZE
#endif
#define OBX_LRG_DATA_POOL_ID GKI_POOL_ID_4
#endif
-/* Used for CTP discovery database. */
-#ifndef CTP_SDP_DB_POOL_ID
-#define CTP_SDP_DB_POOL_ID GKI_POOL_ID_3
-#endif
-
/* Used to send data to L2CAP. */
#ifndef GAP_DATA_POOL_ID
#define GAP_DATA_POOL_ID GKI_POOL_ID_3
#endif
-/* Used for SPP inquiry and discovery databases. */
-#ifndef SPP_DB_POOL_ID
-#define SPP_DB_POOL_ID GKI_POOL_ID_3
-#endif
-
#ifndef SPP_DB_SIZE
#define SPP_DB_SIZE GKI_BUF3_SIZE
#endif
#define RPC_SCRATCH_POOL_ID GKI_POOL_ID_2
#endif
-/* RPC scratch buffer size (not related to RPC_SCRATCH_POOL_ID) */
-#ifndef RPC_SCRATCH_BUF_SIZE
-#define RPC_SCRATCH_BUF_SIZE GKI_BUF3_SIZE
-#endif
-
-/* RPC pool for protocol messages */
-#ifndef RPC_MSG_POOL_ID
-#define RPC_MSG_POOL_ID GKI_POOL_ID_3
-#endif
-
-#ifndef RPC_MSG_POOL_SIZE
-#define RPC_MSG_POOL_SIZE GKI_BUF3_SIZE
-#endif
-
/* AVDTP pool for protocol messages */
#ifndef AVDT_CMD_POOL_ID
#define AVDT_CMD_POOL_ID GKI_POOL_ID_2
#ifndef PAN_POOL_ID
#define PAN_POOL_ID GKI_POOL_ID_3
-#endif
-
-/* UNV pool for read/write serialization */
-#ifndef UNV_MSG_POOL_ID
-#define UNV_MSG_POOL_ID GKI_POOL_ID_2
-#endif
-
-#ifndef UNV_MSG_POOL_SIZE
-#define UNV_MSG_POOL_SIZE GKI_BUF2_SIZE
+/* Maximum amount of the shared buffer to allocate for PAN */
+#define PAN_POOL_MAX (GKI_BUF3_MAX / 4)
#endif
/* AVCTP pool for protocol messages */
#define AVCT_CMD_POOL_ID GKI_POOL_ID_1
#endif
-#ifndef AVCT_META_CMD_POOL_ID
-#define AVCT_META_CMD_POOL_ID GKI_POOL_ID_2
-#endif
-
/* AVRCP pool for protocol messages */
#ifndef AVRC_CMD_POOL_ID
#define AVRC_CMD_POOL_ID GKI_POOL_ID_1
#define AVRC_BROWSE_POOL_SIZE GKI_MAX_BUF_SIZE
#endif
-/* HDP buffer size for the Pulse Oximeter */
-#ifndef BTA_HL_LRG_DATA_POOL_SIZE
-#define BTA_HL_LRG_DATA_POOL_SIZE GKI_BUF7_SIZE
-#endif
-
#ifndef BTA_HL_LRG_DATA_POOL_ID
#define BTA_HL_LRG_DATA_POOL_ID GKI_POOL_ID_7
#endif
**
******************************************************************************/
-/* Sends ACL data received over HCI to the upper stack. */
-#ifndef HCI_ACL_DATA_TO_UPPER
-#define HCI_ACL_DATA_TO_UPPER(p) {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_ACL; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);}
-#endif
-
-/* Sends SCO data received over HCI to the upper stack. */
-#ifndef HCI_SCO_DATA_TO_UPPER
-#define HCI_SCO_DATA_TO_UPPER(p) {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_SCO; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);}
-#endif
-
-/* Sends an HCI event received over HCI to theupper stack. */
-#ifndef HCI_EVT_TO_UPPER
-#define HCI_EVT_TO_UPPER(p) {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_EVT; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);}
-#endif
-
/* Macro for allocating buffer for HCI commands */
#ifndef HCI_GET_CMD_BUF
#if (!defined(HCI_USE_VARIABLE_SIZE_CMD_BUF) || (HCI_USE_VARIABLE_SIZE_CMD_BUF == FALSE))
** HCI Services (H4)
**
******************************************************************************/
-#ifndef HCISU_H4_INCLUDED
-#define HCISU_H4_INCLUDED TRUE
-#endif
-
#ifdef __cplusplus
extern "C" {
#endif
-BT_API extern void bte_main_hci_send (BT_HDR *p_msg, UINT16 event);
-#if (HCISU_H4_INCLUDED == TRUE)
-BT_API extern void bte_main_lpm_allow_bt_device_sleep(void);
-#endif
-
#ifdef __cplusplus
}
#endif
-/* Sends ACL data received from the upper stack to the BD/EDR HCI transport. */
-#ifndef HCI_ACL_DATA_TO_LOWER
-#define HCI_ACL_DATA_TO_LOWER(p) bte_main_hci_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_ACL);
-#endif
-
-#ifndef HCI_BLE_ACL_DATA_TO_LOWER
-#define HCI_BLE_ACL_DATA_TO_LOWER(p) bte_main_hci_send((BT_HDR *)(p), (UINT16)(BT_EVT_TO_LM_HCI_ACL|LOCAL_BLE_CONTROLLER_ID));
-#endif
-
-/* Sends SCO data received from the upper stack to the HCI transport. */
-#ifndef HCI_SCO_DATA_TO_LOWER
-#define HCI_SCO_DATA_TO_LOWER(p) bte_main_hci_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_SCO);
-#endif
-
-/* Sends an HCI command received from the upper stack to the BD/EDR HCI transport. */
-#ifndef HCI_CMD_TO_LOWER
-#define HCI_CMD_TO_LOWER(p) bte_main_hci_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_CMD);
-#endif
-
-/* Sends an LM Diagnosic command received from the upper stack to the HCI transport. */
-#ifndef HCI_LM_DIAG_TO_LOWER
-#define HCI_LM_DIAG_TO_LOWER(p) bte_main_hci_send((BT_HDR *)(p), BT_EVT_TO_LM_DIAG);
-#endif
-
-/* Send HCISU a message to allow BT sleep */
-#ifndef HCI_LP_ALLOW_BT_DEVICE_SLEEP
-#define HCI_LP_ALLOW_BT_DEVICE_SLEEP() bte_main_lpm_allow_bt_device_sleep()
-#endif
-
-/* If nonzero, the upper-layer sends at most this number of HCI commands to the lower-layer. */
-#ifndef HCI_MAX_SIMUL_CMDS
-#define HCI_MAX_SIMUL_CMDS 0
-#endif
-
-/* Timeout for receiving response to HCI command */
-#ifndef BTU_CMD_CMPL_TIMEOUT
-#define BTU_CMD_CMPL_TIMEOUT 8
-#endif
-
-/* If TRUE, BTU task will check HCISU again when HCI command timer expires */
-#ifndef BTU_CMD_CMPL_TOUT_DOUBLE_CHECK
-#define BTU_CMD_CMPL_TOUT_DOUBLE_CHECK FALSE
-#endif
-
/* Use 2 second for low-resolution systems, override to 1 for high-resolution systems */
#ifndef BT_1SEC_TIMEOUT
#define BT_1SEC_TIMEOUT (2)
/* if L2CAP_FCR_INCLUDED is TRUE then it should have 100 millisecond resolution */
/* if none of them is included then QUICK_TIMER_TICKS_PER_SEC is set to 0 to exclude quick timer */
#ifndef QUICK_TIMER_TICKS_PER_SEC
-#define QUICK_TIMER_TICKS_PER_SEC 10 /* 10ms timer */
+#define QUICK_TIMER_TICKS_PER_SEC 10 /* 100ms timer */
#endif
/******************************************************************************
** BTM
**
******************************************************************************/
-/* if set to TRUE, stack will automatically send an HCI reset at start-up. To be
-set to FALSE for advanced start-up / shut-down procedures using USER_HW_ENABLE_API
-and USER_HW_DISABLE_API macros */
-#ifndef BTM_AUTOMATIC_HCI_RESET
-#define BTM_AUTOMATIC_HCI_RESET FALSE
-#endif
-
-/* Include BTM Discovery database and code. */
-#ifndef BTM_DISCOVERY_INCLUDED
-#define BTM_DISCOVERY_INCLUDED TRUE
-#endif
-
/* Include inquiry code. */
#ifndef BTM_INQUIRY_INCLUDED
#define BTM_INQUIRY_INCLUDED TRUE
#define BTM_NO_SSP_ON_INQUIRY FALSE
#endif
-/* Include periodic inquiry code (used when BTM_INQUIRY_INCLUDED is TRUE). */
-#ifndef BTM_PERIODIC_INQ_INCLUDED
-#define BTM_PERIODIC_INQ_INCLUDED TRUE
-#endif
-
-/* Include security authorization code */
-#ifndef BTM_AUTHORIZATION_INCLUDED
-#define BTM_AUTHORIZATION_INCLUDED TRUE
-#endif
-
/* Includes SCO if TRUE */
#ifndef BTM_SCO_INCLUDED
#define BTM_SCO_INCLUDED TRUE /* TRUE includes SCO code */
#define BTM_SCO_DATA_SIZE_MAX 240
#endif
-/* maximum BTM buffering capacity */
-#ifndef BTM_SCO_MAX_BUF_CAP
-#define BTM_SCO_MAX_BUF_CAP (BTM_SCO_INIT_XMIT_CREDIT * 4)
-#endif
-
/* The size in bytes of the BTM inquiry database. */
#ifndef BTM_INQ_DB_SIZE
#define BTM_INQ_DB_SIZE 40
#endif
-/* This is set to enable automatic periodic inquiry at startup. */
-#ifndef BTM_ENABLE_AUTO_INQUIRY
-#define BTM_ENABLE_AUTO_INQUIRY FALSE
-#endif
-
-/* This is set to always try to acquire the remote device name. */
-#ifndef BTM_INQ_GET_REMOTE_NAME
-#define BTM_INQ_GET_REMOTE_NAME FALSE
-#endif
-
-/* The inquiry duration in 1.28 second units when auto inquiry is enabled. */
-#ifndef BTM_DEFAULT_INQ_DUR
-#define BTM_DEFAULT_INQ_DUR 5
-#endif
-
-/* The inquiry mode when auto inquiry is enabled. */
-#ifndef BTM_DEFAULT_INQ_MODE
-#define BTM_DEFAULT_INQ_MODE BTM_GENERAL_INQUIRY
-#endif
-
-/* The default periodic inquiry maximum delay when auto inquiry is enabled, in 1.28 second units. */
-#ifndef BTM_DEFAULT_INQ_MAX_DELAY
-#define BTM_DEFAULT_INQ_MAX_DELAY 30
-#endif
-
-/* The default periodic inquiry minimum delay when auto inquiry is enabled, in 1.28 second units. */
-#ifndef BTM_DEFAULT_INQ_MIN_DELAY
-#define BTM_DEFAULT_INQ_MIN_DELAY 20
-#endif
-
-/* The maximum age of entries in inquiry database in seconds ('0' disables feature). */
-#ifndef BTM_INQ_MAX_AGE
-#define BTM_INQ_MAX_AGE 0
-#endif
-
-/* The maximum age of entries in inquiry database based on inquiry response failure ('0' disables feature). */
-#ifndef BTM_INQ_AGE_BY_COUNT
-#define BTM_INQ_AGE_BY_COUNT 0
-#endif
-
/* TRUE if controller does not support inquiry event filtering. */
#ifndef BTM_BYPASS_EVENT_FILTERING
#define BTM_BYPASS_EVENT_FILTERING FALSE
#define BTM_ALLOW_CONN_IF_NONDISCOVER TRUE
#endif
-/* When connectable mode is set to TRUE, the device will respond to paging. */
-#ifndef BTM_IS_CONNECTABLE
-#define BTM_IS_CONNECTABLE FALSE
-#endif
-
/* Sets the Page_Scan_Window: the length of time that the device is performing a page scan. */
#ifndef BTM_DEFAULT_CONN_WINDOW
#define BTM_DEFAULT_CONN_WINDOW 0x0012
#define BTM_DEFAULT_CONN_INTERVAL 0x0800
#endif
-/* This is set to automatically perform inquiry scan on startup. */
-#ifndef BTM_IS_DISCOVERABLE
-#define BTM_IS_DISCOVERABLE FALSE
-#endif
-
-/* When automatic inquiry scan is enabled, this sets the discovery mode. */
-#ifndef BTM_DEFAULT_DISC_MODE
-#define BTM_DEFAULT_DISC_MODE BTM_GENERAL_DISCOVERABLE
-#endif
-
/* When automatic inquiry scan is enabled, this sets the inquiry scan window. */
#ifndef BTM_DEFAULT_DISC_WINDOW
#define BTM_DEFAULT_DISC_WINDOW 0x0012
#define BTM_DEFAULT_DISC_INTERVAL 0x0800
#endif
-/* Sets the period, in seconds, to automatically perform service discovery. */
-#ifndef BTM_AUTO_DISCOVERY_PERIOD
-#define BTM_AUTO_DISCOVERY_PERIOD 0
-#endif
-
-/* The size in bytes of the BTM discovery database (if discovery is included). */
-#ifndef BTM_DISCOVERY_DB_SIZE
-#define BTM_DISCOVERY_DB_SIZE 4000
-#endif
-
-/* Number of milliseconds to delay BTU task startup upon device initialization. */
-#ifndef BTU_STARTUP_DELAY
-#define BTU_STARTUP_DELAY 0
-#endif
-
-/* Whether BTA is included in BTU task. */
-#ifndef BTU_BTA_INCLUDED
-#define BTU_BTA_INCLUDED TRUE
-#endif
-
-/* Number of seconds to wait to send an HCI Reset command upon device initialization. */
-#ifndef BTM_FIRST_RESET_DELAY
-#define BTM_FIRST_RESET_DELAY 0
-#endif
-
-/* The number of seconds to wait for controller module to reset after issuing an HCI Reset command. */
-#ifndef BTM_AFTER_RESET_TIMEOUT
-#define BTM_AFTER_RESET_TIMEOUT 0
-#endif
-
/* Default class of device
* {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS}
*
#define BTM_SEC_SERVICE_NAME_LEN BT_MAX_SERVICE_NAME_LEN
#endif
-/* Maximum number of pending security callback */
-#ifndef BTM_SEC_MAX_CALLBACKS
-#define BTM_SEC_MAX_CALLBACKS 7
-#endif
-
/* Maximum length of the service name. */
#ifndef BT_MAX_SERVICE_NAME_LEN
#define BT_MAX_SERVICE_NAME_LEN 21
#define BTM_SCO_WAKE_PARKED_LINK TRUE
#endif
-/* May be set to the the name of a function used for vendor specific chip initialization */
-#ifndef BTM_APP_DEV_INIT
-/* #define BTM_APP_DEV_INIT myInitFunction() */
-#endif
-
/* This is set to TRUE if the busy level change event is desired. (replace ACL change event) */
#ifndef BTM_BUSY_LEVEL_CHANGE_INCLUDED
#define BTM_BUSY_LEVEL_CHANGE_INCLUDED TRUE
#define BTM_LOCAL_IO_CAPS BTM_IO_CAP_IO
#endif
+#ifndef BTM_LOCAL_IO_CAPS_BLE
+#define BTM_LOCAL_IO_CAPS_BLE BTM_IO_CAP_KBDISP
+#endif
+
/* The default MITM Protection Requirement (for Simple Pairing)
* Possible values are BTM_AUTH_SP_YES or BTM_AUTH_SP_NO */
#ifndef BTM_DEFAULT_AUTH_REQ
#define BTM_BLE_CONFORMANCE_TESTING FALSE
#endif
-/* Maximum number of consecutive HCI commands that can time out
-* before it gets treated as H/w error*/
-#ifndef BTM_MAX_HCI_CMD_TOUT_BEFORE_RESTART
-#define BTM_MAX_HCI_CMD_TOUT_BEFORE_RESTART 2
-#endif
-
/******************************************************************************
**
** L2CAP
#define L2CAP_MPS_OVER_BR_EDR 1010
#endif
-/* This is set to enable host flow control. */
-#ifndef L2CAP_HOST_FLOW_CTRL
-#define L2CAP_HOST_FLOW_CTRL FALSE
-#endif
-
/* If host flow control enabled, this is the number of buffers the controller can have unacknowledged. */
#ifndef L2CAP_HOST_FC_ACL_BUFS
#define L2CAP_HOST_FC_ACL_BUFS 20
#endif
-/* The percentage of the queue size allowed before a congestion event is sent to the L2CAP client (typically 120%). */
-#ifndef L2CAP_FWD_CONG_THRESH
-#define L2CAP_FWD_CONG_THRESH 120
-#endif
-
/* This is set to enable L2CAP to take the ACL link out of park mode when ACL data is to be sent. */
#ifndef L2CAP_WAKE_PARKED_LINK
#define L2CAP_WAKE_PARKED_LINK TRUE
#define L2CAP_UCD_CH_PRIORITY L2CAP_CHNL_PRIORITY_MEDIUM
#endif
-/* Max clients on Unicast Connectionless Data */
-#ifndef L2CAP_MAX_UCD_CLIENTS
-#define L2CAP_MAX_UCD_CLIENTS 5
-#endif
-
/* Used for features using fixed channels; set to zero if no fixed channels supported (BLE, etc.) */
/* Excluding L2CAP signaling channel and UCD */
#ifndef L2CAP_NUM_FIXED_CHNLS
#define L2CAP_NUM_XMIT_BUFFS HCI_ACL_BUF_MAX
#endif
-/* Used for features using fixed channels; set to zero if no fixed channels supported (BLE, etc.) */
-#ifndef L2CAP_NUM_FIXED_CHNLS
-#define L2CAP_NUM_FIXED_CHNLS 1
-#endif
-
-/* First fixed channel supported */
-#ifndef L2CAP_FIRST_FIXED_CHNL
-#define L2CAP_FIRST_FIXED_CHNL 3
-#endif
-
-#ifndef L2CAP_LAST_FIXED_CHNL
-#define L2CAP_LAST_FIXED_CHNL (L2CAP_FIRST_FIXED_CHNL + L2CAP_NUM_FIXED_CHNLS - 1)
-#endif
-
/* used for monitoring eL2CAP data flow */
#ifndef L2CAP_ERTM_STATS
#define L2CAP_ERTM_STATS FALSE
#endif
-/* USED FOR FCR TEST ONLY: When TRUE generates bad tx and rx packets */
-#ifndef L2CAP_CORRUPT_ERTM_PKTS
-#define L2CAP_CORRUPT_ERTM_PKTS FALSE
-#endif
-
/* Used for conformance testing ONLY: When TRUE lets scriptwrapper overwrite info response */
#ifndef L2CAP_CONFORMANCE_TESTING
#define L2CAP_CONFORMANCE_TESTING FALSE
#endif
-
#ifndef TIMER_PARAM_TYPE
-#ifdef WIN2000
-#define TIMER_PARAM_TYPE void *
-#else
#define TIMER_PARAM_TYPE UINT32
#endif
-#endif
/******************************************************************************
**
#define LOCAL_BLE_CONTROLLER_ID (1)
#endif
+/*
+ * Toggles support for general LE privacy features such as remote address
+ * resolution, local address rotation etc.
+ */
#ifndef BLE_PRIVACY_SPT
#define BLE_PRIVACY_SPT TRUE
#endif
-#ifndef BLE_MULTI_ADV_INCLUDED
-#define BLE_MULTI_ADV_INCLUDED TRUE
+/*
+ * Enables or disables support for local privacy (ex. address rotation)
+ */
+#ifndef BLE_LOCAL_PRIVACY_ENABLED
+#define BLE_LOCAL_PRIVACY_ENABLED TRUE
#endif
+/*
+ * Toggles support for vendor specific extensions such as RPA offloading,
+ * feature discovery, multi-adv etc.
+ */
#ifndef BLE_VND_INCLUDED
-#define BLE_VND_INCLUDED TRUE
+#define BLE_VND_INCLUDED FALSE
+#endif
+
+#ifndef BTM_BLE_ADV_TX_POWER
+#define BTM_BLE_ADV_TX_POWER {-21, -15, -7, 1, 9}
#endif
+
#ifndef BLE_BATCH_SCAN_INCLUDED
#define BLE_BATCH_SCAN_INCLUDED TRUE
#endif
#ifndef BLE_LLT_INCLUDED
#define BLE_LLT_INCLUDED TRUE
#endif
-#ifndef BTM_DUMO_ADDR_CENTRAL_ENABLED
-#define BTM_DUMO_ADDR_CENTRAL_ENABLED FALSE
-#endif
+
#ifndef ATT_INCLUDED
#define ATT_INCLUDED TRUE
#endif
#define ATT_DEBUG TRUE
#endif
-#ifndef GATT_SERVER_ENABLED
-#define GATT_SERVER_ENABLED TRUE
-#endif
-
-#ifndef GATT_CLIENT_ENABLED
-#define GATT_CLIENT_ENABLED TRUE
-#endif
-
#ifndef BLE_PERIPHERAL_MODE_SUPPORT
#define BLE_PERIPHERAL_MODE_SUPPORT TRUE
#endif
-#ifndef BLE_PERIPHERAL_DISPLAYONLY
-#define BLE_PERIPHERAL_DISPLAYONLY FALSE
-#endif
-
#ifndef BLE_PERIPHERAL_ADV_NAME
#define BLE_PERIPHERAL_ADV_NAME FALSE
#endif
#endif
#ifndef GATT_MAX_APPS
-#define GATT_MAX_APPS 10 /* note: 2 apps used internally GATT and GAP */
-#endif
-
-#ifndef GATT_MAX_CL_PROFILES
-#define GATT_MAX_CL_PROFILES 4
+#define GATT_MAX_APPS 32 /* note: 2 apps used internally GATT and GAP */
#endif
#ifndef GATT_MAX_PHY_CHANNEL
#endif
#ifndef SMP_DEBUG
-#define SMP_DEBUG TRUE
+#define SMP_DEBUG FALSE
#endif
#ifndef SMP_DEFAULT_AUTH_REQ
/* The maximum number of attributes in each record. */
#ifndef SDP_MAX_REC_ATTR
-//#if defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE)
#define SDP_MAX_REC_ATTR 25
-//#else
-//#define SDP_MAX_REC_ATTR 13
-//#endif
#endif
#ifndef SDP_MAX_PAD_LEN
/* The maximum length, in bytes, of an attribute. */
#ifndef SDP_MAX_ATTR_LEN
-//#if defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE)
-//#define SDP_MAX_ATTR_LEN 80
-//#else
-//#define SDP_MAX_ATTR_LEN 100
-//#endif
#define SDP_MAX_ATTR_LEN 400
#endif
#define SDP_SECURITY_LEVEL BTM_SEC_NONE
#endif
-/* Device identification feature. */
-#ifndef SDP_DI_INCLUDED
-#define SDP_DI_INCLUDED TRUE
-#endif
-
/******************************************************************************
**
** RFCOMM
#define PORT_CREDIT_RX_LOW 8
#endif
-/* Test code allowing l2cap FEC on RFCOMM.*/
-#ifndef PORT_ENABLE_L2CAP_FCR_TEST
-#define PORT_ENABLE_L2CAP_FCR_TEST FALSE
-#endif
-
/* if application like BTA, Java or script test engine is running on other than BTU thread, */
/* PORT_SCHEDULE_LOCK shall be defined as GKI_sched_lock() or GKI_disable() */
#ifndef PORT_SCHEDULE_LOCK
#define TCS_INCLUDED FALSE
#endif
-/* If set to TRUE, gives lean TCS state machine configuration. */
-#ifndef TCS_LEAN
-#define TCS_LEAN FALSE
-#endif
-
/* To include/exclude point-to-multipoint broadcast SETUP configuration. */
#ifndef TCS_BCST_SETUP_INCLUDED
#define TCS_BCST_SETUP_INCLUDED TRUE
#endif
-/* To include/exclude supplementary services. */
-#ifndef TCS_SUPP_SVCS_INCLUDED
-#define TCS_SUPP_SVCS_INCLUDED TRUE
-#endif
-
-/* To include/exclude WUG master role. */
-#ifndef TCS_WUG_MASTER_INCLUDED
-#define TCS_WUG_MASTER_INCLUDED TRUE
-#endif
-
/* To include/exclude WUG member role. */
#ifndef TCS_WUG_MEMBER_INCLUDED
#define TCS_WUG_MEMBER_INCLUDED TRUE
#endif
-/* Maximum number of WUG members. */
-#ifndef TCS_MAX_WUG_MEMBERS
-#define TCS_MAX_WUG_MEMBERS 7
-#endif
-
-/* Broadcom specific acknowledgement message to ensure fast and robust operation of WUG FIMA procedure. */
-#ifndef TCS_WUG_LISTEN_ACPT_ACK_INCLUDED
-#define TCS_WUG_LISTEN_ACPT_ACK_INCLUDED TRUE
-#endif
-
-/* The number of simultaneous calls supported. */
-#ifndef TCS_MAX_NUM_SIMUL_CALLS
-#define TCS_MAX_NUM_SIMUL_CALLS 3
-#endif
-
-/* The number of devices the device can connect to. */
-#ifndef TCS_MAX_NUM_ACL_CONNS
-#define TCS_MAX_NUM_ACL_CONNS 7
-#endif
-
-/* The maximum length, in bytes, of the company specific information element. */
-#ifndef TCS_MAX_CO_SPEC_LEN
-#define TCS_MAX_CO_SPEC_LEN 40
-#endif
-
-/* The maximum length, in bytes, of the audio control information element . */
-#ifndef TCS_MAX_AUDIO_CTL_LEN
-#define TCS_MAX_AUDIO_CTL_LEN 40
-#endif
-
-/* (Dis)allow EDR ESCO */
-#ifndef TCS_AUDIO_USE_ESCO_EDR
-#define TCS_AUDIO_USE_ESCO_EDR FALSE
-#endif
-
/******************************************************************************
**
** OBX
#define OBX_MD5_INCLUDED TRUE
#endif
-/* TRUE to include OBEX authentication/MD5 test code */
-#ifndef OBX_MD5_TEST_INCLUDED
-#define OBX_MD5_TEST_INCLUDED FALSE
-#endif
-
/* TRUE to include OBEX 1.4 enhancement (including Obex Over L2CAP) */
#ifndef OBX_14_INCLUDED
#define OBX_14_INCLUDED FALSE
#define OBX_14_INCLUDED FALSE
#endif
-/* The timeout value (in seconds) for reliable sessions to remain in suspend. 0xFFFFFFFF for no timeout event. */
-#ifndef OBX_SESS_TIMEOUT_VALUE
-#define OBX_SESS_TIMEOUT_VALUE 600
-#endif
-
/* The idle timeout value. 0 for no timeout event. */
#ifndef OBX_TIMEOUT_VALUE
#define OBX_TIMEOUT_VALUE 60
#endif
-/* Timeout value used for disconnect */
-#ifndef OBX_DISC_TOUT_VALUE
-#define OBX_DISC_TOUT_VALUE 5
-#endif
-
/* The maximum number of registered servers. */
#ifndef OBX_NUM_SERVERS
#define OBX_NUM_SERVERS 12
#define OBX_MAX_SR_SESSION 4
#endif
-/* The maximum number of sessions for all registered servers.
- * (must be equal or bigger than OBX_NUM_SERVERS) */
-#ifndef OBX_NUM_SR_SESSIONS
-#define OBX_NUM_SR_SESSIONS 26
-#endif
-
/* The maximum number of sessions per registered server.
* must be less than MAX_BD_CONNECTIONS */
#ifndef OBX_MAX_SR_SESSION
#define OBX_MAX_TARGET_LEN 16
#endif
-/* The maximum length of authentication challenge realm.*/
-#ifndef OBX_MAX_REALM_LEN
-#define OBX_MAX_REALM_LEN 30
-#endif
-
-/* The maximum of GKI buffer queued at OBX before flow control L2CAP */
-#ifndef OBX_MAX_RX_QUEUE_COUNT
-#define OBX_MAX_RX_QUEUE_COUNT 3
-#endif
-
-/* This option is application when OBX_14_INCLUDED=TRUE
- Pool ID where to reassemble the SDU.
- This Pool will allow buffers to be used that are larger than
- the L2CAP_MAX_MTU. */
-#ifndef OBX_USER_RX_POOL_ID
-#define OBX_USER_RX_POOL_ID OBX_LRG_DATA_POOL_ID
-#endif
-
-/* This option is application when OBX_14_INCLUDED=TRUE
- Pool ID where to hold the SDU.
- This Pool will allow buffers to be used that are larger than
- the L2CAP_MAX_MTU. */
-#ifndef OBX_USER_TX_POOL_ID
-#define OBX_USER_TX_POOL_ID OBX_LRG_DATA_POOL_ID
-#endif
-
/* This option is application when OBX_14_INCLUDED=TRUE
GKI Buffer Pool ID used to hold MPS segments during SDU reassembly
*/
#define OBX_FCR_TX_POOL_ID HCI_ACL_POOL_ID
#endif
-/* This option is application when OBX_14_INCLUDED=TRUE
-Size of the transmission window when using enhanced retransmission mode. Not used
-in basic and streaming modes. Range: 1 - 63
-*/
-#ifndef OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR
-#define OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR 20
-#endif
-
-/* This option is application when OBX_14_INCLUDED=TRUE
-Number of transmission attempts for a single I-Frame before taking
-Down the connection. Used In ERTM mode only. Value is Ignored in basic and
-Streaming modes.
-Range: 0, 1-0xFF
-0 - infinite retransmissions
-1 - single transmission
-*/
-#ifndef OBX_FCR_OPT_MAX_TX_B4_DISCNT
-#define OBX_FCR_OPT_MAX_TX_B4_DISCNT 20
-#endif
-
-/* This option is application when OBX_14_INCLUDED=TRUE
-Retransmission Timeout
-Range: Minimum 2000 (2 secs) on BR/EDR when supporting PBF.
- */
-#ifndef OBX_FCR_OPT_RETX_TOUT
-#define OBX_FCR_OPT_RETX_TOUT 2000
-#endif
-
-/* This option is application when OBX_14_INCLUDED=TRUE
-Monitor Timeout
-Range: Minimum 12000 (12 secs) on BR/EDR when supporting PBF.
-*/
-#ifndef OBX_FCR_OPT_MONITOR_TOUT
-#define OBX_FCR_OPT_MONITOR_TOUT 12000
-#endif
-
/******************************************************************************
**
** BNEP
#define BNEP_MTU_SIZE BNEP_MIN_MTU_SIZE
#endif
-/* Maximum size of user data, in bytes. */
-#ifndef BNEP_MAX_USER_DATA_SIZE
-#define BNEP_MAX_USER_DATA_SIZE 1500
-#endif
-
/* Maximum number of buffers allowed in transmit data queue. */
#ifndef BNEP_MAX_XMITQ_DEPTH
#define BNEP_MAX_XMITQ_DEPTH 20
#else
/* signaling and media channels */
#define AVDT_NUM_CHANNELS 2
-#endif
+#endif // AVDT_REPORTING
-#endif
+#endif // AVDT_NUM_CHANNELS
/* Number of transport channels setup by AVDT for all media streams
* AVDT_NUM_CHANNELS * Number of simultaneous streams.
#define AVDT_NUM_TC_TBL 6
#endif
-
/* Maximum size in bytes of the codec capabilities information element. */
#ifndef AVDT_CODEC_SIZE
#define AVDT_CODEC_SIZE 10
#define PAN_SUPPORTS_DEBUG_DUMP TRUE
#endif
-
/* Maximum number of PAN connections allowed */
#ifndef MAX_PAN_CONNS
#define MAX_PAN_CONNS 7
#define PAN_NAP_SECURITY_LEVEL 0
#endif
-
-
-
/******************************************************************************
**
** GAP
#define CTP_INCLUDED FALSE
#endif
-/* To include CTP gateway functionality or not. */
-#ifndef CTP_GW_INCLUDED
-#define CTP_GW_INCLUDED TRUE
-#endif
-
-/* The number of terminals supported. */
-#ifndef CTP_MAX_NUM_TLS
-#define CTP_MAX_NUM_TLS 7
-#endif
-
-/* If the controller can not support sniff mode when the SCO is up, set this to FALSE. */
-#ifndef CTP_USE_SNIFF_ON_SCO
-#define CTP_USE_SNIFF_ON_SCO FALSE
-#endif
-
-/* When ACL link between TL and GW is idle for more than this amount of seconds, the ACL may be put to low power mode. */
-#ifndef CTP_TL_IDLE_TIMEOUT
-#define CTP_TL_IDLE_TIMEOUT 90
-#endif
-
-/* To include CTP terminal functionality or not. */
-#ifndef CTP_TL_INCLUDED
-#define CTP_TL_INCLUDED TRUE
-#endif
-
-/* To include CTP device discovery functionality or not. */
-#ifndef CTP_DISCOVERY_INCLUDED
-#define CTP_DISCOVERY_INCLUDED TRUE
-#endif
-
-/* set to TRUE for controllers that do not support multi-point */
-#ifndef CTP_TL_WAIT_DISC
-#define CTP_TL_WAIT_DISC TRUE
-#endif
-
-/* The CTP inquiry database size. */
-#ifndef CTP_INQ_DB_SIZE
-#define CTP_INQ_DB_SIZE CTP_DISC_REC_SIZE
-#endif
-
/* The CTP discovery record size. */
#ifndef CTP_DISC_REC_SIZE
#define CTP_DISC_REC_SIZE 60
#endif
-/* CTP TL would try to re-establish L2CAP channel after channel is disconnected for this amount of seconds. */
-#ifndef CTP_GUARD_LINK_LOST
-#define CTP_GUARD_LINK_LOST 1
-#endif
-
-/* The link policy bitmap. */
-#ifndef CTP_DEFAULT_LINK_POLICY
-#define CTP_DEFAULT_LINK_POLICY 0x000F
-#endif
-
-/* The minimum period interval used for the sniff and park modes. */
-#ifndef CTP_DEF_LOWPWR_MIN_PERIOD
-#define CTP_DEF_LOWPWR_MIN_PERIOD 0x100
-#endif
-
-/* The maximum period interval used for the sniff and park modes. */
-#ifndef CTP_DEF_LOWPWR_MAX_PERIOD
-#define CTP_DEF_LOWPWR_MAX_PERIOD 0x1E0
-#endif
-
-/* The number of baseband receive slot sniff attempts. */
-#ifndef CTP_DEF_LOWPWR_ATTEMPT
-#define CTP_DEF_LOWPWR_ATTEMPT 0x200
-#endif
-
-/* The number of baseband receive slots for sniff timeout. */
-#ifndef CTP_DEF_LOWPWR_TIMEOUT
-#define CTP_DEF_LOWPWR_TIMEOUT 0x200
-#endif
-
-/* This is set if CTP is to use park mode. */
-#ifndef CTP_PARK_INCLUDED
-#define CTP_PARK_INCLUDED TRUE
-#endif
-
-/* This is set if CTP is to use sniff mode. */
-#ifndef CTP_SNIFF_INCLUDED
-#define CTP_SNIFF_INCLUDED TRUE
-#endif
-
-/* To include CTP data exchange functionality or not. */
-#ifndef CTP_DATA_EXCHG_FEATURE
-#define CTP_DATA_EXCHG_FEATURE FALSE
-#endif
-
-/* To include CTP GW intercom functionality or not. */
-#ifndef CTP_GW_INTERCOM_FEATURE
-#define CTP_GW_INTERCOM_FEATURE FALSE
-#endif
-
-/* The MTU size for L2CAP channel. */
-#ifndef CTP_MTU_SIZE
-#define CTP_MTU_SIZE 200
-#endif
-
-/* The L2CAP PSM for the data exchange feature. */
-#ifndef CTP_DATA_EXCHG_PSM
-#define CTP_DATA_EXCHG_PSM 13
-#endif
-
-/* The flush timeout for L2CAP channels. */
-#ifndef CTP_FLUSH_TO
-#define CTP_FLUSH_TO 0xFFFF
-#endif
-
-/* The default service name for CTP. */
-#ifndef CTP_DEFAULT_SERVICE_NAME
-#define CTP_DEFAULT_SERVICE_NAME "Cordless Telephony"
-#endif
-
-/* The CTP security level. */
-#ifndef CTP_SECURITY_LEVEL
-#define CTP_SECURITY_LEVEL (BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT)
-#endif
-
-/* The number of lines to the external network. */
-#ifndef CTP_MAX_LINES
-#define CTP_MAX_LINES 1
-#endif
-
-/* Test if the number of resources in TCS is consistent with CTP setting. */
-#ifndef CTP_TEST_FULL_TCS
-#define CTP_TEST_FULL_TCS TRUE
-#endif
-
-/* The default inquiry mode. */
-#ifndef CTP_DEFAULT_INQUIRY_MODE
-#define CTP_DEFAULT_INQUIRY_MODE BTM_GENERAL_INQUIRY
-#endif
-
-/* The default inquiry duration. */
-#ifndef CTP_DEFAULT_INQ_DURATION
-#define CTP_DEFAULT_INQ_DURATION 4
-#endif
-
-/* The maximum number of inquiry responses. */
-#ifndef CTP_DEFAULT_INQ_MAX_RESP
-#define CTP_DEFAULT_INQ_MAX_RESP 3
-#endif
-
-/* When TL does not create another L2CAP channel within this period of time GW declares that it's "Connected Limited". */
-#ifndef CTP_TL_CONN_TIMEOUT
-#define CTP_TL_CONN_TIMEOUT 5
-#endif
-
-/* The delay for ACL to completely disconnect (for intercom) before sending the connect request to GW. */
-#ifndef CTP_RECONNECT_DELAY
-#define CTP_RECONNECT_DELAY 5
-#endif
-
-/* How many times to retry connection when it has failed. */
-#ifndef CTP_RETRY_ON_CONN_ERR
-#define CTP_RETRY_ON_CONN_ERR 5
-#endif
-
/******************************************************************************
**
** ICP
#define ICP_INCLUDED FALSE
#endif
-/* The ICP default MTU. */
-#ifndef ICP_MTU_SIZE
-#define ICP_MTU_SIZE 100
-#endif
-
-/* The ICP security level. */
-#ifndef ICP_SECURITY_LEVEL
-#define ICP_SECURITY_LEVEL BTM_SEC_NONE
-#endif
-
-/* The default service name for ICP. */
-#ifndef ICP_DEFAULT_SERVICE_NAME
-#define ICP_DEFAULT_SERVICE_NAME "Intercom"
-#endif
-
-/* The flush timeout for L2CAP channels. */
-#ifndef ICP_FLUSH_TO
-#define ICP_FLUSH_TO 0xFFFF
-#endif
-
/******************************************************************************
**
** SPP
#define SPP_INCLUDED FALSE
#endif
-/* The SPP default MTU. */
-#ifndef SPP_DEFAULT_MTU
-#define SPP_DEFAULT_MTU 127
-#endif
-
-/* The interval, in seconds, that a client tries to reconnect to a service. */
-#ifndef SPP_RETRY_CONN_INTERVAL
-#define SPP_RETRY_CONN_INTERVAL 1
-#endif
-
-/* The SPP discoverable mode: limited or general. */
-#ifndef SPP_DISCOVERABLE_MODE
-#define SPP_DISCOVERABLE_MODE BTM_GENERAL_DISCOVERABLE
-#endif
-
-/* The maximum number of inquiry results returned in by inquiry procedure. */
-#ifndef SPP_DEF_INQ_MAX_RESP
-#define SPP_DEF_INQ_MAX_RESP 10
-#endif
-
/* The SPP discovery record size. */
#ifndef SPP_DISC_REC_SIZE
#define SPP_DISC_REC_SIZE 60
#endif
-#ifndef SPP_MAX_RECS_PER_DEVICE
-#define SPP_MAX_RECS_PER_DEVICE (SPP_DB_SIZE / SPP_DISC_REC_SIZE)
-#endif
-
-/* Inquiry duration in 1.28 second units. */
-#ifndef SPP_DEF_INQ_DURATION
-#define SPP_DEF_INQ_DURATION 9
-#endif
-
/* keep the raw data received from SDP server in database. */
#ifndef SDP_RAW_DATA_INCLUDED
#define SDP_RAW_DATA_INCLUDED TRUE
#endif
-/* TRUE, to allow JV to create L2CAP connection on SDP PSM. */
-#ifndef SDP_FOR_JV_INCLUDED
-#define SDP_FOR_JV_INCLUDED FALSE
-#endif
-
/* Inquiry duration in 1.28 second units. */
#ifndef SDP_DEBUG
#define SDP_DEBUG TRUE
#define HSP2_INCLUDED FALSE
#endif
-/* Include the ability to perform inquiry for peer devices. */
-#ifndef HSP2_INQUIRY_INCLUDED
-#define HSP2_INQUIRY_INCLUDED TRUE
-#endif
-
-/* Include Audio Gateway specific code. */
-#ifndef HSP2_AG_INCLUDED
-#define HSP2_AG_INCLUDED TRUE
-#endif
-
-/* Include Headset Specific Code. */
-#ifndef HSP2_HS_INCLUDED
-#define HSP2_HS_INCLUDED TRUE
-#endif
-
-/* Include the ability to open an SCO connection for In-Band Ringing. */
-#ifndef HSP2_IB_RING_INCLUDED
-#define HSP2_IB_RING_INCLUDED TRUE
-#endif
-
-/* Include the ability to repeat a ring. */
-#ifndef HSP2_AG_REPEAT_RING
-#define HSP2_AG_REPEAT_RING TRUE
-#endif
-
-#ifndef HSP2_APP_CLOSES_ON_CKPD
-#define HSP2_APP_CLOSES_ON_CKPD FALSE
-#endif
-
-
-/* Include the ability to park a connection. */
-#ifndef HSP2_PARK_INCLUDED
-#define HSP2_PARK_INCLUDED TRUE
-#endif
-
-/* Include HSP State Machine debug trace messages. */
-#ifndef HSP2_FSM_DEBUG
-#define HSP2_FSM_DEBUG TRUE
-#endif
-
-/* The Module's Inquiry Scan Window. */
-#ifndef HSP2_INQ_SCAN_WINDOW
-#define HSP2_INQ_SCAN_WINDOW 0
-#endif
-
-/* The Module's Inquiry Scan Interval. */
-#ifndef HSP2_INQ_SCAN_INTERVAL
-#define HSP2_INQ_SCAN_INTERVAL 0
-#endif
-
-/* The Module's Page Scan Interval. */
-#ifndef HSP2_PAGE_SCAN_INTERVAL
-#define HSP2_PAGE_SCAN_INTERVAL 0
-#endif
-
-/* The Module's Page Scan Window. */
-#ifndef HSP2_PAGE_SCAN_WINDOW
-#define HSP2_PAGE_SCAN_WINDOW 0
-#endif
-
-/* The Park Mode's Minimum Beacon Period. */
-#ifndef HSP2_BEACON_MIN_PERIOD
-#define HSP2_BEACON_MIN_PERIOD 450
-#endif
-
-/* The Park Mode's Maximum Beacon Period. */
-#ifndef HSP2_BEACON_MAX_PERIOD
-#define HSP2_BEACON_MAX_PERIOD 500
-#endif
-
-/* The duration of the inquiry in seconds. */
-#ifndef HSP2_INQ_DURATION
-#define HSP2_INQ_DURATION 4
-#endif
-
-/* Maximum number of peer responses during an inquiry. */
-#ifndef HSP2_INQ_MAX_NUM_RESPS
-#define HSP2_INQ_MAX_NUM_RESPS 3
-#endif
-
-/* Maximum number of times to retry an inquiry prior to failure. */
-#ifndef HSP2_MAX_INQ_RETRY
-#define HSP2_MAX_INQ_RETRY 6
-#endif
-
-/* Maximum number of times to retry an RFCOMM connection prior to failure. */
-#ifndef HSP2_MAX_CONN_RETRY
-#define HSP2_MAX_CONN_RETRY 3
-#endif
-
-/* If the connect request failed for authentication reasons, do not retry */
-#ifndef HSP2_NO_RETRY_ON_AUTH_FAIL
-#define HSP2_NO_RETRY_ON_AUTH_FAIL TRUE
-#endif
-
-/* Maximum number of characters in an HSP2 device name. */
-#ifndef HSP2_MAX_NAME_LEN
-#define HSP2_MAX_NAME_LEN 32
-#endif
-
-/* The minimum speaker and/or microphone gain setting. */
-#ifndef HSP2_MIN_GAIN
-#define HSP2_MIN_GAIN 0
-#endif
-
-/* The maximum speaker and/or microphone setting. */
-#ifndef HSP2_MAX_GAIN
-#define HSP2_MAX_GAIN 15
-#endif
-
-/* The default value to send on an AT+CKPD. */
-#ifndef HSP2_KEYPRESS_DEFAULT
-#define HSP2_KEYPRESS_DEFAULT 200
-#endif
-
-/* Maximum amount a data that can be received per RFCOMM frame. */
-#ifndef HSP2_MAX_RFC_READ_LEN
-#define HSP2_MAX_RFC_READ_LEN 128
-#endif
-
/* The time in seconds to wait for completion of a partial AT command or response from the peer. */
#ifndef HSP2_AT_TO_INTERVAL
#define HSP2_AT_TO_INTERVAL 30
#endif
-/* The time to wait before repeating a ring to a peer Headset. */
-#ifndef HSP2_REPEAT_RING_TO
-#define HSP2_REPEAT_RING_TO 4
-#endif
-
-/* Time to wait for a response for an AT command */
-#ifndef HSP2_AT_RSP_TO
-#define HSP2_AT_RSP_TO 20
-#endif
-
-/* SCO packet type(s) to use (bitmask: see spec), 0 - device default (recommended) */
-#ifndef HSP2_SCO_PKT_TYPES
-#define HSP2_SCO_PKT_TYPES ((UINT16)0x0000)
-#endif
-
-/* The default settings of the SCO voice link. */
-#ifndef HSP2_DEFAULT_VOICE_SETTINGS
-#define HSP2_DEFAULT_VOICE_SETTINGS (HCI_INP_CODING_LINEAR | HCI_INP_DATA_FMT_2S_COMPLEMENT | HCI_INP_SAMPLE_SIZE_16BIT | HCI_AIR_CODING_FORMAT_CVSD)
-#endif
-
-#ifndef HSP2_MAX_AT_CMD_LENGTH
-#define HSP2_MAX_AT_CMD_LENGTH 16
-#endif
-
#ifndef HSP2_MAX_AT_VAL_LENGTH
#if (defined(HFP_INCLUDED) && HFP_INCLUDED == TRUE)
#define HSP2_MAX_AT_VAL_LENGTH 310
#endif
#endif
-
-#ifndef HSP2_SDP_DB_SIZE
-#define HSP2_SDP_DB_SIZE 300
-#endif
-
-
/******************************************************************************
**
** HFP
#define HFP_INCLUDED FALSE
#endif
-/* Include Audio Gateway specific code. */
-#ifndef HFP_AG_INCLUDED
-#define HFP_AG_INCLUDED TRUE
-#endif
-
-/* Include Hand Free Specific Code. */
-#ifndef HFP_HF_INCLUDED
-#define HFP_HF_INCLUDED TRUE
-#endif
-
-/* Use AT interface instead of full blown API */
-#ifndef AT_INTERFACE
-#define AT_INTERFACE FALSE
-#endif
-
-/* HFP Manages SCO establishement for various procedures */
-#ifndef HFP_SCO_MGMT_INCLUDED
-#define HFP_SCO_MGMT_INCLUDED TRUE
-#endif
-
-/* CCAP compliant features and behavior desired */
-#ifndef CCAP_COMPLIANCE
-#define CCAP_COMPLIANCE TRUE
-#endif
-
-/* Caller ID string, part of +CLIP result code */
-#ifndef HFP_MAX_CLIP_INFO
-#define HFP_MAX_CLIP_INFO 45
-#endif
-
-#ifndef HFP_RPT_PEER_INFO_INCLUDED
-#define HFP_RPT_PEER_INFO_INCLUDED TRUE /* Reporting of peer features enabled */
-#endif
-
/******************************************************************************
**
** HID
#define HID_DEV_PM_INCLUDED TRUE
#endif
-/* The HID Device is a virtual cable */
-#ifndef HID_DEV_VIRTUAL_CABLE
-#define HID_DEV_VIRTUAL_CABLE TRUE
-#endif
-
-/* The HID device initiates the reconnections */
-#ifndef HID_DEV_RECONN_INITIATE
-#define HID_DEV_RECONN_INITIATE TRUE
-#endif
-
-/* THe HID device is normally connectable */
-#ifndef HID_DEV_NORMALLY_CONN
-#define HID_DEV_NORMALLY_CONN FALSE
-#endif
-
-/* The device is battery powered */
-#ifndef HID_DEV_BATTERY_POW
-#define HID_DEV_BATTERY_POW TRUE
-#endif
-
-/* Device is capable of waking up the host */
-#ifndef HID_DEV_REMOTE_WAKE
-#define HID_DEV_REMOTE_WAKE TRUE
-#endif
-
-/* Device needs host to close SDP channel after SDP is over */
-#ifndef HID_DEV_SDP_DISABLE
-#define HID_DEV_SDP_DISABLE TRUE
-#endif
-
-#ifndef HID_DEV_MTU_SIZE
-#define HID_DEV_MTU_SIZE 64
-#endif
-
-#ifndef HID_DEV_FLUSH_TO
-#define HID_DEV_FLUSH_TO 0xffff
-#endif
-
-#ifndef HID_DEV_PAGE_SCAN_WIN
-#define HID_DEV_PAGE_SCAN_WIN (0)
-#endif
-
-#ifndef HID_DEV_PAGE_SCAN_INT
-#define HID_DEV_PAGE_SCAN_INT (0)
-#endif
-
-#ifndef HID_DEV_MAX_CONN_RETRY
-#define HID_DEV_MAX_CONN_RETRY (15)
-#endif
-
-#ifndef HID_DEV_REPAGE_WIN
-#define HID_DEV_REPAGE_WIN (1)
-#endif
-
-#ifndef HID_DEV_SVC_NAME
-#define HID_DEV_SVC_NAME "HID"
-#endif
-
-#ifndef HID_DEV_SVC_DESCR
-#define HID_DEV_SVC_DESCR "3-button mouse and keyboard"
-#endif
-
-#ifndef HID_DEV_PROVIDER_NAME
-#define HID_DEV_PROVIDER_NAME "Widcomm"
-#endif
-
-#ifndef HID_DEV_REL_NUM
-#define HID_DEV_REL_NUM 0x0100
-#endif
-
-#ifndef HID_DEV_PARSER_VER
-#define HID_DEV_PARSER_VER 0x0111
-#endif
-
#ifndef HID_DEV_SUBCLASS
#define HID_DEV_SUBCLASS COD_MINOR_POINTING
#endif
-#ifndef HID_DEV_COUNTRY_CODE
-#define HID_DEV_COUNTRY_CODE 0x33
-#endif
-
-#ifndef HID_DEV_SUP_TOUT
-#define HID_DEV_SUP_TOUT 0x8000
-#endif
-
-#ifndef HID_DEV_NUM_LANGS
-#define HID_DEV_NUM_LANGS 1
-#endif
-
-#ifndef HID_DEV_INACT_TIMEOUT
-#define HID_DEV_INACT_TIMEOUT 60
-#endif
-
-#ifndef HID_DEV_BUSY_MODE_PARAMS
-#define HID_DEV_BUSY_MODE_PARAMS { 320, 160, 10, 20, HCI_MODE_ACTIVE }
-#endif
-
-#ifndef HID_DEV_IDLE_MODE_PARAMS
-#define HID_DEV_IDLE_MODE_PARAMS { 320, 160, 10, 20, HCI_MODE_SNIFF }
-#endif
-
-#ifndef HID_DEV_SUSP_MODE_PARAMS
-#define HID_DEV_SUSP_MODE_PARAMS { 640, 320, 0, 0, HCI_MODE_PARK }
-#endif
-
-#ifndef HID_DEV_MAX_DESCRIPTOR_SIZE
-#define HID_DEV_MAX_DESCRIPTOR_SIZE 128 /* Max descriptor size */
-#endif
-
-#ifndef HID_DEV_LANGUAGELIST
-#define HID_DEV_LANGUAGELIST {0x35, 0x06, 0x09, 0x04, 0x09, 0x09, 0x01, 0x00}
-#endif
-
-#ifndef HID_DEV_LINK_SUPERVISION_TO
-#define HID_DEV_LINK_SUPERVISION_TO 0x8000
-#endif
-
#ifndef HID_CONTROL_POOL_ID
#define HID_CONTROL_POOL_ID 2
#endif
#define HID_HOST_REPAGE_WIN (2)
#endif
-
/******************************************************************************
**
** DUN and FAX
#define DUN_INCLUDED FALSE
#endif
-
/******************************************************************************
**
** GOEP
#define GOEP_INCLUDED FALSE
#endif
-/* This is set to enable GOEP non-blocking file system access functions. */
-#ifndef GOEP_FS_INCLUDED
-#define GOEP_FS_INCLUDED FALSE
-#endif
-
-/* GOEP authentication key size. */
-#ifndef GOEP_MAX_AUTH_KEY_SIZE
-#define GOEP_MAX_AUTH_KEY_SIZE 16
-#endif
-
-/* Maximum size of the realm authentication string. */
-#ifndef GOEP_MAX_AUTH_REALM_SIZE
-#define GOEP_MAX_AUTH_REALM_SIZE 16
-#endif
-
-/* Realm Character Set */
-#ifndef GOEP_REALM_CHARSET
-#define GOEP_REALM_CHARSET 0 /* ASCII */
-#endif
-
-/* This is set to the maximum length of path name allowed in the system (_MAX_PATH). */
-#ifndef GOEP_MAX_PATH_SIZE
-#define GOEP_MAX_PATH_SIZE 255
-#endif
-
-/* Specifies whether or not client's user id is required during obex authentication */
-#ifndef GOEP_SERVER_USERID_REQUIRED
-#define GOEP_SERVER_USERID_REQUIRED FALSE
-#endif
-
-/* This is set to the maximum length of file name allowed in the system (_MAX_FNAME). */
-#ifndef GOEP_MAX_FILE_SIZE
-#define GOEP_MAX_FILE_SIZE 128
-#endif
-
-/* Character used as path separator */
-#ifndef GOEP_PATH_SEPARATOR
-#define GOEP_PATH_SEPARATOR ((char) 0x5c) /* 0x2f ('/'), or 0x5c ('\') */
-#endif
-
/******************************************************************************
**
** OPP
#define OPP_INCLUDED FALSE
#endif
-/* This is set to enable OPP client capabilities. */
-#ifndef OPP_CLIENT_INCLUDED
-#define OPP_CLIENT_INCLUDED FALSE
-#endif
-
-/* This is set to enable OPP server capabilities. */
-#ifndef OPP_SERVER_INCLUDED
-#define OPP_SERVER_INCLUDED FALSE
-#endif
-
-/* if the optional formating functions are to be included or not */
-#ifndef OPP_FORMAT_INCLUDED
-#define OPP_FORMAT_INCLUDED FALSE
-#endif
-
-/* Maximum number of client sessions allowed by server */
-#ifndef OPP_MAX_SRVR_SESS
-#define OPP_MAX_SRVR_SESS 3
-#endif
-
-/******************************************************************************
-**
-** FTP
-**
-******************************************************************************/
-
-#ifndef FTP_INCLUDED
-#define FTP_INCLUDED FALSE
-#endif
-
-/* This is set to enable FTP client capabilities. */
-#ifndef FTP_CLIENT_INCLUDED
-#define FTP_CLIENT_INCLUDED TRUE
-#endif
-
-/* This is set to enable FTP server capabilities. */
-#ifndef FTP_SERVER_INCLUDED
-#define FTP_SERVER_INCLUDED TRUE
-#endif
-
-/******************************************************************************
-**
-** XML Parser
-**
-******************************************************************************/
-
-#ifndef XML_STACK_SIZE
-#define XML_STACK_SIZE 7
-#endif
-
/******************************************************************************
**
** BPP Printer
**
******************************************************************************/
-#ifndef BPP_DEBUG
-#define BPP_DEBUG FALSE
-#endif
-
#ifndef BPP_INCLUDED
#define BPP_INCLUDED FALSE
#endif
#define BPP_SND_INCLUDED FALSE
#endif
-/* Maximum number of senders allowed to connect simultaneously
-** The maximum is 6 or (OBX_NUM_SERVERS / 2), whichever is smaller
-*/
-#ifndef BPP_PR_MAX_CON
-#define BPP_PR_MAX_CON 3
-#endif
-
-/* Service Name. maximum length: 248
-#ifndef BPP_SERVICE_NAME
-#define BPP_SERVICE_NAME "Basic Printing"
-#endif
- */
-/* Document Format Supported. ASCII comma-delimited list of MIME type:version string
-#ifndef BPP_DOC_FORMAT_SUPPORTED
-#define BPP_DOC_FORMAT_SUPPORTED "application/vnd.pwg-xhtml-print:1.0,application/vnd.hp-PCL:5E,application/PDF"
-#endif
-
-#ifndef BPP_DOC_FORMAT_SUPPORTED_LEN
-#define BPP_DOC_FORMAT_SUPPORTED_LEN 77
-#endif
- */
-/* Character repertoires.
-#ifndef BPP_CHARACTER_REPERTOIRES
-#define BPP_CHARACTER_REPERTOIRES {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01}
-#endif
- */
-/* XHTML formats.
-#ifndef BPP_XHTML_PRINT_FORMATS
-#define BPP_XHTML_PRINT_FORMATS "image/gif:89A,image/jpeg"
-#endif
-
-#ifndef BPP_XHTML_PRINT_FORMATS_LEN
-#define BPP_XHTML_PRINT_FORMATS_LEN 24
-#endif
- */
-/* Color supported.
-#ifndef BPP_COLOR_SUPORTED
-#define BPP_COLOR_SUPORTED FALSE
-#endif
- */
-/* 1284 ID string. First 2 bytes are the length.
-#ifndef BPP_1284ID
-#define BPP_1284ID "\x00\x48MANUFACTURER:ACME Manufacturing;COMMAND SET:PCL,MPL;MODEL:LaserBeam \?;"
-#endif
-
-#ifndef BPP_1284ID_LEN
-#define BPP_1284ID_LEN 72
-#endif
- */
-/* Printer name.
-#ifndef BPP_PRINTER_NAME
-#define BPP_PRINTER_NAME "My Printer"
-#endif
-
-#ifndef BPP_PRINTER_NAME_LEN
-#define BPP_PRINTER_NAME_LEN 10
-#endif
- */
-
-/* Printer location.
-#ifndef BPP_PRINTER_LOCATION
-#define BPP_PRINTER_LOCATION "Hotel Lobby"
-#endif
-
-#ifndef BPP_PRINTER_LOCATION_LEN
-#define BPP_PRINTER_LOCATION_LEN 11
-#endif
- */
-/* Duplex printing supported.
-#ifndef BPP_DUPLEX_SUPPORTED
-#define BPP_DUPLEX_SUPPORTED TRUE
-#endif
- */
-
-/* Media types supported.
-#ifndef BPP_MEDIA_TYPES_SUPPORTED
-#define BPP_MEDIA_TYPES_SUPPORTED "stationary,continuous-long,photographic-high-gloss,cardstock"
-#endif
-
-#ifndef BPP_MEDIA_TYPES_SUPPORTED_LEN
-#define BPP_MEDIA_TYPES_SUPPORTED_LEN 60
-#endif
- */
-/* Maximum media with supported.
-#ifndef BPP_MAX_MEDIA_WIDTH
-#define BPP_MAX_MEDIA_WIDTH 205
-#endif
- */
-/* Maximum media length supported.
-#ifndef BPP_MAX_MEDIA_LENGTH
-#define BPP_MAX_MEDIA_LENGTH 285
-#endif
- */
-/* the maximum string len for the media size of medium loaded */
-#ifndef BPP_MEDIA_SIZE_LEN
-#define BPP_MEDIA_SIZE_LEN 33
-#endif
-
-/* Debug Trace the SOAP object, if TRUE */
-#ifndef BPP_TRACE_XML
-#define BPP_TRACE_XML TRUE
-#endif
-
-/* in case that the SOAP object does not all come in one OBEX packet,
- * this size of data may be kept in the BPP control block for continuing parsing.
- * The maximum is the size of the biggest GKI buffer (GKI_MAX_BUF_SIZE) */
-#ifndef BPP_SOAP_KEEP_SIZE
-#define BPP_SOAP_KEEP_SIZE 200
-#endif
-
-
/******************************************************************************
**
** BIP
#define BIP_INCLUDED FALSE
#endif
-/* TRUE to include imaging initiator */
-#ifndef BIP_INITR_INCLUDED
-#define BIP_INITR_INCLUDED FALSE
-#endif
-
-/* TRUE to include imaging responder */
-#ifndef BIP_RSPDR_INCLUDED
-#define BIP_RSPDR_INCLUDED FALSE
-#endif
-
-/* TRUE to include image push feature */
-#ifndef BIP_PUSH_INCLUDED
-#define BIP_PUSH_INCLUDED TRUE
-#endif
-
-/* TRUE to include image pull feature */
-#ifndef BIP_PULL_INCLUDED
-#define BIP_PULL_INCLUDED TRUE
-#endif
-
-/* TRUE to include advanced image printing feature */
-#ifndef BIP_PRINTING_INCLUDED
-#define BIP_PRINTING_INCLUDED TRUE
-#endif
-
-/* TRUE to include automatic archive feature */
-#ifndef BIP_ARCHIVE_INCLUDED
-#define BIP_ARCHIVE_INCLUDED TRUE
-#endif
-
-/* TRUE to include remote camera feature */
-#ifndef BIP_CAMERA_INCLUDED
-#define BIP_CAMERA_INCLUDED TRUE
-#endif
-
-/* TRUE to include remote display feature */
-#ifndef BIP_DISPLAY_INCLUDED
-#define BIP_DISPLAY_INCLUDED TRUE
-#endif
-
-/* TRUE to include sanity check code for API functions */
-#ifndef BIP_SANITY_CHECKS
-#define BIP_SANITY_CHECKS TRUE
-#endif
-
-/* TRUE to show the received XML object in trace for conformance tests */
-#ifndef BIP_TRACE_XML
-#define BIP_TRACE_XML TRUE
-#endif
-
-/* in case that the received XML object is not complete, the XML parser state machine needs
- * to keep a copy of the data from the last '<'
- * This macro specifies the maximun amount of data for this purpose */
-#ifndef BIP_XML_CARRY_OVER_LEN
-#define BIP_XML_CARRY_OVER_LEN 100
-#endif
-
-/* minimum 4, maximum is 255. The value should be set to the maximum size of encoding string + 1. JPEG2000.
- * If vendor specific format is supported, it might be bigger than 9 */
-#ifndef BIP_IMG_ENCODE_SIZE
-#define BIP_IMG_ENCODE_SIZE 9
-#endif
-
-/* MIME type: text/plain */
-#ifndef BIP_TYPE_SIZE
-#define BIP_TYPE_SIZE 20
-#endif
-
-/* example: iso-8895-1 */
-#ifndef BIP_CHARSET_SIZE
-#define BIP_CHARSET_SIZE 10
-#endif
-
-/* friendly name */
-#ifndef BIP_FNAME_SIZE
-#define BIP_FNAME_SIZE 20
-#endif
-
-/* service name */
-#ifndef BIP_SNAME_SIZE
-#define BIP_SNAME_SIZE 60
-#endif
-
-/* temporary storage file name(for file system access, may include path) */
-#ifndef BIP_TEMP_NAME_SIZE
-#define BIP_TEMP_NAME_SIZE 200
-#endif
-
-/* image file name */
-#ifndef BIP_IMG_NAME_SIZE
-#define BIP_IMG_NAME_SIZE 200
-#endif
-
-/* attachment file name */
-#ifndef BIP_ATT_NAME_SIZE
-#define BIP_ATT_NAME_SIZE 200
-#endif
-
-/* object (image, attachment, thumbnail) file name (may be used for file system) */
-#ifndef BIP_OBJ_NAME_SIZE
-#define BIP_OBJ_NAME_SIZE 200
-#endif
-
-
-
/******************************************************************************
**
** HCRP
#define HCRP_CLIENT_INCLUDED FALSE
#endif
-/* TRUE enables the notification option of the profile. */
-#ifndef HCRP_NOTIFICATION_INCLUDED
-#define HCRP_NOTIFICATION_INCLUDED TRUE
-#endif
-
-/* TRUE enables the vendor specific option of the profile. */
-#ifndef HCRP_VENDOR_SPEC_INCLUDED
-#define HCRP_VENDOR_SPEC_INCLUDED TRUE
-#endif
-
-/* TRUE enables state machine traces. */
-#ifndef HCRP_FSM_DEBUG
-#define HCRP_FSM_DEBUG FALSE
-#endif
-
-/* TRUE enables protocol message traces. */
-#ifndef HCRP_PROTO_DEBUG
-#define HCRP_PROTO_DEBUG FALSE
-#endif
-
-/* Maximum length used to store the service name (Minimum 1). */
-#ifndef HCRP_MAX_SERVICE_NAME_LEN
-#define HCRP_MAX_SERVICE_NAME_LEN 32
-#endif
-
-/* Maximum length used to store the device name (Minimum 1). */
-#ifndef HCRP_MAX_DEVICE_NAME_LEN
-#define HCRP_MAX_DEVICE_NAME_LEN 32
-#endif
-
-/* Maximum length of device location (Minimum 1) */
-#ifndef HCRP_MAX_DEVICE_LOC_LEN
-#define HCRP_MAX_DEVICE_LOC_LEN 32
-#endif
-
-/* Maximum length used to store the friendly name (Minimum 1). */
-#ifndef HCRP_MAX_FRIENDLY_NAME_LEN
-#define HCRP_MAX_FRIENDLY_NAME_LEN 32
-#endif
-
-/* Maximum length used to store the 1284 id string (Minimum 2 byte length field). */
-#ifndef HCRP_MAX_SDP_1284_ID_LEN
-#define HCRP_MAX_SDP_1284_ID_LEN 128
-#endif
-
-/* Maximum length for parameters to be processed for vendor specific commands. */
-#ifndef HCRP_MAX_VEND_SPEC_LEN
-#define HCRP_MAX_VEND_SPEC_LEN 4
-#endif
-
-/* Number of seconds to wait for 2nd GAP to open. */
-#ifndef HCRP_OPEN_CHAN_TOUT
-#define HCRP_OPEN_CHAN_TOUT 5
-#endif
-
-/* Number of seconds to wait for 2nd GAP to close. */
-#ifndef HCRP_CLOSE_CHAN_TOUT
-#define HCRP_CLOSE_CHAN_TOUT 3
-#endif
-
-/* Number of seconds to wait for the application to respond to a protocol request. */
-#ifndef HCRP_APPL_RSP_TOUT
-#define HCRP_APPL_RSP_TOUT 5
-#endif
-
-/* Number of seconds to wait for the peer device to respond to a protocol request. */
-#ifndef HCRP_CMD_RSP_TOUT
-#define HCRP_CMD_RSP_TOUT 7
-#endif
-
-/* Number of seconds between subsequent credit requests to the server when the send watermark has been exceeded. */
-#ifndef HCRP_CREDIT_REQ_UPDATES
-#define HCRP_CREDIT_REQ_UPDATES 1
-#endif
-
-/* Maximum number of results to return in a HCRP_FindServices search. */
-#ifndef HCRP_MAX_SEARCH_RESULTS
-#define HCRP_MAX_SEARCH_RESULTS 1
-#endif
-
-/* Maximum number of bytes to be reserved for searching for the client's notification record. */
-#ifndef HCRP_MAX_NOTIF_DISC_BUF
-#define HCRP_MAX_NOTIF_DISC_BUF 300
-#endif
-
-/* Maximum number of clients the server will allow to be registered for notifications. */
-#ifndef HCRP_MAX_NOTIF_CLIENTS
-#define HCRP_MAX_NOTIF_CLIENTS 3
-#endif
-
-/* Spec says minimum of two notification retries. */
-#ifndef HCRP_NOTIF_NUM_RETRIES
-#define HCRP_NOTIF_NUM_RETRIES 4
-#endif
-
-/*************************************************************************
-** Definitions for Multi-Client Server HCRP
-** Note: Many of the above HCRP definitions are also used
-** Maximum number of clients allowed to connect simultaneously
-** Must be less than ((GAP_MAX_CONNECTIONS - 1) / 2)
-*/
-#ifndef HCRPM_MAX_CLIENTS
-#define HCRPM_MAX_CLIENTS 3
-#endif
-
-
/******************************************************************************
**
** PAN
#define PAN_INCLUDED FALSE
#endif
-
/******************************************************************************
**
** SAP
#define SAP_SERVER_INCLUDED FALSE
#endif
-
/*************************************************************************
* A2DP Definitions
*/
#define A2D_SBC_INCLUDED A2D_INCLUDED
#endif
-/* TRUE to include MPEG-1,2 (mp3) utility functions */
-#ifndef A2D_M12_INCLUDED
-#define A2D_M12_INCLUDED A2D_INCLUDED
-#endif
-
-/* TRUE to include MPEG-2,4 (aac) utility functions */
-#ifndef A2D_M24_INCLUDED
-#define A2D_M24_INCLUDED A2D_INCLUDED
-#endif
-
/******************************************************************************
**
** AVCTP
#define AVCT_NUM_CONN 3
#endif
-/* Pool ID where to reassemble the SDU.
- This Pool allows buffers to be used that are larger than
- the L2CAP_MAX_MTU. */
-#ifndef AVCT_BR_USER_RX_POOL_ID
-#define AVCT_BR_USER_RX_POOL_ID HCI_ACL_POOL_ID
-#endif
-
-/* Pool ID where to hold the SDU.
- This Pool allows buffers to be used that are larger than
- the L2CAP_MAX_MTU. */
-#ifndef AVCT_BR_USER_TX_POOL_ID
-#define AVCT_BR_USER_TX_POOL_ID HCI_ACL_POOL_ID
-#endif
-
-/*
-GKI Buffer Pool ID used to hold MPS segments during SDU reassembly
-*/
-#ifndef AVCT_BR_FCR_RX_POOL_ID
-#define AVCT_BR_FCR_RX_POOL_ID HCI_ACL_POOL_ID
-#endif
-
-/*
-GKI Buffer Pool ID used to hold MPS segments used in (re)transmissions.
-L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool.
-Note: This pool needs to have enough buffers to hold two times the window size negotiated
- in the tL2CAP_FCR_OPTIONS (2 * tx_win_size) to allow for retransmissions.
- The size of each buffer must be able to hold the maximum MPS segment size passed in
- tL2CAP_FCR_OPTIONS plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec).
-*/
-#ifndef AVCT_BR_FCR_TX_POOL_ID
-#define AVCT_BR_FCR_TX_POOL_ID HCI_ACL_POOL_ID
-#endif
-
-/* AVCTP Browsing channel FCR Option:
-Size of the transmission window when using enhanced retransmission mode. Not used
-in basic and streaming modes. Range: 1 - 63
-*/
-#ifndef AVCT_BR_FCR_OPT_TX_WINDOW_SIZE
-#define AVCT_BR_FCR_OPT_TX_WINDOW_SIZE 10
-#endif
-
-/* AVCTP Browsing channel FCR Option:
-Number of transmission attempts for a single I-Frame before taking
-Down the connection. Used In ERTM mode only. Value is Ignored in basic and
-Streaming modes.
-Range: 0, 1-0xFF
-0 - infinite retransmissions
-1 - single transmission
-*/
-#ifndef AVCT_BR_FCR_OPT_MAX_TX_B4_DISCNT
-#define AVCT_BR_FCR_OPT_MAX_TX_B4_DISCNT 20
-#endif
-
-/* AVCTP Browsing channel FCR Option: Retransmission Timeout
-The AVRCP specification set a value in the range of 300 - 2000 ms
-Timeout (in msecs) to detect Lost I-Frames. Only used in Enhanced retransmission mode.
-Range: Minimum 2000 (2 secs) when supporting PBF.
- */
-#ifndef AVCT_BR_FCR_OPT_RETX_TOUT
-#define AVCT_BR_FCR_OPT_RETX_TOUT 2000
-#endif
-
-/* AVCTP Browsing channel FCR Option: Monitor Timeout
-The AVRCP specification set a value in the range of 300 - 2000 ms
-Timeout (in msecs) to detect Lost S-Frames. Only used in Enhanced retransmission mode.
-Range: Minimum 12000 (12 secs) when supporting PBF.
-*/
-#ifndef AVCT_BR_FCR_OPT_MONITOR_TOUT
-#define AVCT_BR_FCR_OPT_MONITOR_TOUT 12000
-#endif
-
/******************************************************************************
**
** AVRCP
#define MCA_INCLUDED FALSE
#endif
-/* TRUE to support Clock Synchronization OpCodes */
-#ifndef MCA_SYNC_INCLUDED
-#define MCA_SYNC_INCLUDED FALSE
-#endif
-
/* The MTU size for the L2CAP configuration on control channel. 48 is the minimal */
#ifndef MCA_CTRL_MTU
#define MCA_CTRL_MTU 60
#define SER_INCLUDED FALSE
#endif
-/* Task which runs the serial application. */
-#ifndef SER_TASK
-#define SER_TASK BTE_APPL_TASK
-#endif
-
/* Mailbox used by serial application. */
#ifndef SER_MBOX
#define SER_MBOX TASK_MBOX_1
#endif
-/* Mailbox mask. */
-#ifndef SER_MBOX_MASK
-#define SER_MBOX_MASK TASK_MBOX_1_EVT_MASK
-#endif
-
-/* TX path application event. */
-#ifndef SER_TX_PATH_APPL_EVT
-#define SER_TX_PATH_APPL_EVT EVENT_MASK(APPL_EVT_3)
-#endif
-
-/* RX path application event. */
-#ifndef SER_RX_PATH_APPL_EVT
-#define SER_RX_PATH_APPL_EVT EVENT_MASK(APPL_EVT_4)
-#endif
-
/******************************************************************************
**
** Sleep Mode (Low Power Mode)
/******************************************************************************
**
-** RPC
-**
-******************************************************************************/
-
-#ifndef RPC_INCLUDED
-#define RPC_INCLUDED FALSE
-#endif
-
-/* RPCT task mailbox ID for messages coming from rpcgen code. */
-#ifndef RPCT_MBOX
-#define RPCT_MBOX TASK_MBOX_0
-#endif
-
-/* RPCT task event for mailbox. */
-#ifndef RPCT_RPC_MBOX_EVT
-#define RPCT_RPC_MBOX_EVT TASK_MBOX_0_EVT_MASK
-#endif
-
-/* RPCT task event from driver indicating RX data is ready. */
-#ifndef RPCT_RX_READY_EVT
-#define RPCT_RX_READY_EVT APPL_EVT_0
-#endif
-
-/* RPCT task event from driver indicating data TX is done. */
-#ifndef RPCT_TX_DONE_EVT
-#define RPCT_TX_DONE_EVT APPL_EVT_1
-#endif
-
-/* RPCT task event indicating data is in the circular buffer. */
-#ifndef RPCT_UCBUF_EVT
-#define RPCT_UCBUF_EVT APPL_EVT_2
-#endif
-
-/* Task ID of RPCGEN task. */
-#ifndef RPCGEN_TASK
-#define RPCGEN_TASK BTU_TASK
-#endif
-
-/* RPCGEN task event for messages coming from RPCT. */
-#ifndef RPCGEN_MSG_EVT
-#define RPCGEN_MSG_EVT TASK_MBOX_1_EVT_MASK
-#endif
-
-#ifndef RPCGEN_MSG_MBOX
-#define RPCGEN_MSG_MBOX TASK_MBOX_1
-#endif
-
-/* Size of circular buffer used to store diagnostic messages. */
-#ifndef RPCT_UCBUF_SIZE
-#define RPCT_UCBUF_SIZE 2000
-#endif
-
-/******************************************************************************
-**
** SAP - Sample applications
**
******************************************************************************/
#define APPL_INCLUDED TRUE
#endif
-/* When TRUE remote terminal code included (RPC MUST be included) */
-#ifndef RSI_INCLUDED
-#define RSI_INCLUDED TRUE
-#endif
-
-
-
#define L2CAP_FEATURE_REQ_ID 73
#define L2CAP_FEATURE_RSP_ID 173
-
/******************************************************************************
**
** BTA
/******************************************************************************
**
-** BTE
-**
-******************************************************************************/
-#ifndef BTE_PLATFORM_IDLE
-#define BTE_PLATFORM_IDLE
-#endif
-
-#ifndef BTE_IDLE_TASK_INCLUDED
-#define BTE_IDLE_TASK_INCLUDED FALSE
-#endif
-
-#ifndef BTE_PLATFORM_INITHW
-#define BTE_PLATFORM_INITHW
-#endif
-
-#ifndef BTE_BTA_CODE_INCLUDED
-#define BTE_BTA_CODE_INCLUDED FALSE
-#endif
-
-/******************************************************************************
-**
-** BTTRC
-**
-******************************************************************************/
-/* Whether to parse and display traces-> Platform specific implementation */
-#ifndef BTTRC_DISP
-#define BTTRC_DISP BTTRC_DispOnInsight
-#endif
-
-/******************************************************************************
-**
** Tracing: Include trace header file here.
**
******************************************************************************/
#include "bt_trace.h"
#endif /* BT_TARGET_H */
-