*
******************************************************************************/
-#ifndef BTE_APPL_H
-#define BTE_APPL_H
-
-#include "btm_int.h"
-#include "bta_api.h"
-#include "bta_sys.h"
-#include "bte.h"
-
-/* Maximum length for serial port device name */
-#ifndef BTE_APPL_MAX_USERIAL_DEV_NAME
-#define BTE_APPL_MAX_USERIAL_DEV_NAME (256)
-#endif
-#ifndef BTAPP_AHF_API_SUPPORT
-#define BTAPP_AHF_API_SUPPORT FALSE
-#endif
-
-/* BTA APP_IDs */
-#define UI_DM_ID 1
-#define UI_PRM_ID 20
-/* this defines the enabled BTA modules. client may not be defined as those are enabled at run time.
- * they are defined for completeness. please check with bta_sys.h for new modules.
- * BTA_ID_DM serves as flag for BTA_EnableBluetooth()
- * BTA_ID_RES can be used to fs ID in bte_appl.
- */
-
-#define BTAPP_NUM_ID_BLOCKS ((BTA_ID_MAX/32)+1) /* number of 32 bit required to store one bit per
- btapp id */
-
-#define BTAPP_APPL_MAIL_EVENT(x) (x<<8) /* define bte_appl task mail box event. LSB contains
- BTA_ID_xxx (see bta_sys.h) */
-#define BTAPP_APPL_MAIL_EVT 0xff00 /* high byte contains bitmap of application module event */
-
-/* helper macro to copy BTA callack data y into message buffer x, for event data structure z */
-#define MEMCPY_APPL_MSG(x, y, z) memcpy( (void *)(((UINT8 *)x)+sizeof(BT_HDR)), (void *)y, sizeof(z) )
-
-/* Event masks for BTE_APPL_TASK */
-#define BTE_APPL_STARTUP_EVT EVENT_MASK(APPL_EVT_0) /* Bluetooth has started */
-#define BTE_APPL_SHUTDOWN_EVT EVENT_MASK(APPL_EVT_1) /* Bluetooth is shutting down */
-#define BTE_APPL_SOCKET_RX_EVT EVENT_MASK(APPL_EVT_2) /* Socket data ready to be read */
-#define BTE_APPL_DBUS_RX_EVT EVENT_MASK(APPL_EVT_3) /* DBUS message ready to be read */
-#define BTE_APPL_BTA_ENABLE_EVT EVENT_MASK(APPL_EVT_4) /* BTA Enabled event */
-
-
-/* Application configuration */
-#define BTE_APPL_PATCHRAM_PATH_MAXLEN 128
-#define BTE_APPL_CONTACTS_DB_PATH 256
+#pragma once
typedef struct {
#if ((BLE_INCLUDED == TRUE) && (SMP_INCLUDED == TRUE))
} tBTE_APPL_CFG;
extern tBTE_APPL_CFG bte_appl_cfg;
-
-typedef struct {
- pthread_mutex_t mutex; /* mutex to protect below signal condition */
- pthread_cond_t cond; /* signal event */
-} tBTAPP_SEMAPHORE;
-
-/* helper functions to handle pthread conditions event from outside GKI */
-extern void bte_create_semaphore( tBTAPP_SEMAPHORE * p_sema );
-extern void bte_wait_semaphore( tBTAPP_SEMAPHORE * p_sema, unsigned msecs_to );
-extern void bte_signal_semaphore( tBTAPP_SEMAPHORE * p_sema );
-extern void bte_destroy_semaphore( tBTAPP_SEMAPHORE * p_sema );
-
-/* global application control block storing global application states and variables */
-typedef struct tBTE_APPL_CB_tag {
- sigset_t signal_handler_set; /* signal handler set used by signal handler thread */
-#if ( TRUE == BTE_RESET_BAUD_ON_BT_DISABLE )
- tBTAPP_SEMAPHORE shutdown_semaphore; /* used to sync with terminate handler initated ops */
-#endif
- BOOLEAN amp_enabled; /* TRUE if AMP is in use */
-} tBTE_APPL_CB;
-
-extern tBTE_APPL_CB bte_appl_cb;
-
-/* Exports the application task */
-extern void BTE_appl_task(UINT32 params);
-extern int BTAPP_enable_bta( const UINT32 bta_module_state[BTAPP_NUM_ID_BLOCKS], int includingFM );
-extern int BTAPP_disable_bta( const UINT32 bta_module_state[BTAPP_NUM_ID_BLOCKS], int includingFM );
-
-extern UINT8 appl_trace_level;
-#define BT_PCM_CLK_IDX 1
-#ifndef BT_PCM_DEF_CLK
-#define BT_PCM_DEF_CLK 4 /* defaults to 2048khz PCM clk */
-#endif
-#define BT_PCM_SYNC_MS_ROLE_IDX 3
-#define BT_PCM_CLK_MS_ROLE_IDX 4
-#ifndef BT_PCM_DEF_ROLE
-#define BT_PCM_DEF_ROLE 0x00 /* assume slave as default */
-#endif
-
-/* helper macros to set, clear and get current BTA module id in a 32bit ARRAY!! */
-/* set bit id to 1 in UINT32 a[] NO RANGE CHECK!*/
-#define BTAPP_SET_BTA_MOD(id, a) { a[id/32] |= (UINT32)(1<<(id % 32)); }
-
-/* set bit id to 0 (cleared) in UINT32 a[] NO RANGE CHECK */
-#define BTAPP_CLEAR_BTA_MOD(id, a) { a[id/32] &= (UINT32)!(1<<(id % 32)); }
-
-/* tests if bit id is 1 in UINT32 a[] NO RANGE CHECK */
-#define BTAPP_BTA_MOD_IS_SET(id, a) (a[id/32] & (UINT32)(1<<(id % 32)))
-
-/* update this list either via btld.txt or directly here by adding the new profiles as per bta_sys.h.
- * each xxx_LISTx may only contain 32 bits */
-#ifndef BTAPP_BTA_MODULES_LIST0
-#define BTAPP_BTA_MODULES_LIST0 (\
- ( 1<<BTA_ID_DM ) | \
- ( 1<<BTA_ID_DG ) | \
- ( 1<<BTA_ID_AG ) | \
- ( 1<<BTA_ID_OPC )| \
- ( 1<<BTA_ID_OPS )| \
- ( 1<<BTA_ID_FTS )| \
- ( 1<<BTA_ID_PAN )| \
- ( 1<<BTA_ID_PR ) | \
- ( 1<<BTA_ID_SC) | \
- ( 1<<BTA_ID_AV ) | \
- ( 1<<BTA_ID_HH ) | \
- ( 1<<BTA_ID_PBS) | \
- ( 1<<BTA_ID_FMTX)| \
- ( 1<<BTA_ID_JV) | \
- ( 1<<BTA_ID_MSE) \
- )
-#endif
-
-#define BTAPP_LIST1_BLOCK 32 /* next 32 bit block */
-#ifndef BTAPP_BTA_MODULES_LIST1
-#define BTAPP_BTA_MODULES_LIST1 (\
- ( 1<<(BTA_ID_MAX-BTAPP_LIST1_BLOCK) ) | \
- ( 1<<(BTA_ID_MSE-BTAPP_LIST1_BLOCK) ) | \
- 0 \
- )
-#endif
-/* for future GPS etc support. goes int LIST1 above */
-#if 0
- ( 1<<(BTA_ID_SSR-BTAPP_LIST1_BLOCK) ) \
- ( 1<<(BTA_ID_MSE-BTAPP_LIST1_BLOCK) ) \
- ( 1<<(BTA_ID_MCE-BTAPP_LIST1_BLOCK) )
-#endif
-
-/* used application init default in bte_main.c, bte_appl_cfg */
-#ifndef BTAPP_DEFAULT_MODULES
-#if (1==BTAPP_NUM_ID_BLOCKS)
-#define BTAPP_DEFAULT_MODULES {BTAPP_BTA_MODULES_LIST0} /* max 32 modules IDs */
-#elif (2==BTAPP_NUM_ID_BLOCKS)
-#define BTAPP_DEFAULT_MODULES {BTAPP_BTA_MODULES_LIST0, BTAPP_BTA_MODULES_LIST1} /* 64 module IDs max */
-#else
-#error "Define more BTAPP_BTA_MODULES_LISTx"
-#endif
-#endif
-
-#endif /* BTE_APPL_H */
OSDN Git Service
