mac80211: QoS related cleanups

[uclinux-h8/linux.git] / include / net / mac80211.h

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ef701d6..75a3460 100644 (file)
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -98,6 +98,18 @@ struct ieee80211_ht_bss_info {
 };
 
 /**
+ * enum ieee80211_max_queues - maximum number of queues
+ *
+ * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
+ * @IEEE80211_MAX_AMPDU_QUEUES: Maximum number of queues usable
+ *     for A-MPDU operation.
+ */
+enum ieee80211_max_queues {
+       IEEE80211_MAX_QUEUES =          16,
+       IEEE80211_MAX_AMPDU_QUEUES =    16,
+};
+
+/**
  * struct ieee80211_tx_queue_params - transmit queue configuration
  *
  * The information provided in this structure is required for QoS
@@ -129,42 +141,6 @@ struct ieee80211_tx_queue_stats {
        unsigned int count;
 };
 
-/**
- * enum ieee80211_tx_queue - transmit queue number
- *
- * These constants are used with some callbacks that take a
- * queue number to set parameters for a queue.
- *
- * @IEEE80211_TX_QUEUE_DATA0: data queue 0
- * @IEEE80211_TX_QUEUE_DATA1: data queue 1
- * @IEEE80211_TX_QUEUE_DATA2: data queue 2
- * @IEEE80211_TX_QUEUE_DATA3: data queue 3
- * @IEEE80211_TX_QUEUE_DATA4: data queue 4
- * @IEEE80211_TX_QUEUE_SVP: ??
- * @NUM_TX_DATA_QUEUES: number of data queues
- * @IEEE80211_TX_QUEUE_AFTER_BEACON: transmit queue for frames to be
- *     sent after a beacon
- * @IEEE80211_TX_QUEUE_BEACON: transmit queue for beacon frames
- * @NUM_TX_DATA_QUEUES_AMPDU: adding more queues for A-MPDU
- */
-enum ieee80211_tx_queue {
-       IEEE80211_TX_QUEUE_DATA0,
-       IEEE80211_TX_QUEUE_DATA1,
-       IEEE80211_TX_QUEUE_DATA2,
-       IEEE80211_TX_QUEUE_DATA3,
-       IEEE80211_TX_QUEUE_DATA4,
-       IEEE80211_TX_QUEUE_SVP,
-
-       NUM_TX_DATA_QUEUES,
-
-/* due to stupidity in the sub-ioctl userspace interface, the items in
- * this struct need to have fixed values. As soon as it is removed, we can
- * fix these entries. */
-       IEEE80211_TX_QUEUE_AFTER_BEACON = 6,
-       IEEE80211_TX_QUEUE_BEACON = 7,
-       NUM_TX_DATA_QUEUES_AMPDU = 16
-};
-
 struct ieee80211_low_level_stats {
        unsigned int dot11ACKFailureCount;
        unsigned int dot11RTSFailureCount;
@@ -315,7 +291,7 @@ struct ieee80211_tx_control {
                                 * position represents antenna number used */
        u8 icv_len;             /* length of the ICV/MIC field in octets */
        u8 iv_len;              /* length of the IV field in octets */
-       u8 queue;               /* hardware queue to use for this frame;
+       u16 queue;              /* hardware queue to use for this frame;
                                 * 0 = highest, hw->queues-1 = lowest */
        u16 aid;                /* Station AID */
        int type;       /* internal */
@@ -772,7 +748,14 @@ enum ieee80211_hw_flags {
  * @max_noise: like @max_rssi, but for the noise value.
  *
  * @queues: number of available hardware transmit queues for
- *     data packets. WMM/QoS requires at least four.
+ *     data packets. WMM/QoS requires at least four, these
+ *     queues need to have configurable access parameters.
+ *
+ * @ampdu_queues: number of available hardware transmit queues
+ *     for A-MPDU packets, these have no access parameters
+ *     because they're used only for A-MPDU frames. Note that
+ *     mac80211 will not currently use any of the regular queues
+ *     for aggregation.
  *
  * @rate_control_algorithm: rate control algorithm for this hardware.
  *     If unset (NULL), the default algorithm will be used. Must be
@@ -791,7 +774,7 @@ struct ieee80211_hw {
        unsigned int extra_tx_headroom;
        int channel_change_time;
        int vif_data_size;
-       u8 queues;
+       u16 queues, ampdu_queues;
        s8 max_rssi;
        s8 max_signal;
        s8 max_noise;
@@ -1069,8 +1052,7 @@ enum ieee80211_ampdu_mlme_action {
  *     of assocaited station or AP.
  *
  * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
- *     bursting) for a hardware TX queue. The @queue parameter uses the
- *     %IEEE80211_TX_QUEUE_* constants. Must be atomic.
+ *     bursting) for a hardware TX queue. Must be atomic.
  *
  * @get_tx_stats: Get statistics of the current TX queue status. This is used
  *     to get number of currently queued packets (queue length), maximum queue
@@ -1150,7 +1132,7 @@ struct ieee80211_ops {
                               u32 short_retry, u32 long_retr);
        void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
                        enum sta_notify_cmd, const u8 *addr);
-       int (*conf_tx)(struct ieee80211_hw *hw, int queue,
+       int (*conf_tx)(struct ieee80211_hw *hw, u16 queue,
                       const struct ieee80211_tx_queue_params *params);
        int (*get_tx_stats)(struct ieee80211_hw *hw,
                            struct ieee80211_tx_queue_stats *stats);