#include <stdint.h>
#include <telephony/ril_cdma_sms.h>
#include <telephony/ril_nv_items.h>
+#include <telephony/ril_msim.h>
#ifndef FEATURE_UNIT_TEST
#include <sys/time.h>
extern "C" {
#endif
+
+#if defined(ANDROID_SIM_COUNT_2)
+#define SIM_COUNT 2
+#elif defined(ANDROID_SIM_COUNT_3)
+#define SIM_COUNT 3
+#elif defined(ANDROID_SIM_COUNT_4)
+#define SIM_COUNT 4
+#else
+#define SIM_COUNT 1
+#endif
+
+#ifndef ANDROID_MULTI_SIM
+#define SIM_COUNT 1
+#endif
+
#define RIL_VERSION 10 /* Current version */
#define RIL_VERSION_MIN 6 /* Minimum RIL_VERSION supported */
#define CDMA_ALPHA_INFO_BUFFER_LENGTH 64
#define CDMA_NUMBER_INFO_BUFFER_LENGTH 81
+#define MAX_RILDS 3
+#define MAX_SOCKET_NAME_LENGTH 6
+#define MAX_CLIENT_ID_LENGTH 2
+#define MAX_DEBUG_SOCKET_NAME_LENGTH 12
+#define MAX_QEMU_PIPE_NAME_LENGTH 11
+
typedef void * RIL_Token;
typedef enum {
+ RIL_SOCKET_1,
+#if (SIM_COUNT >= 2)
+ RIL_SOCKET_2,
+#if (SIM_COUNT >= 3)
+ RIL_SOCKET_3,
+#endif
+#if (SIM_COUNT >= 4)
+ RIL_SOCKET_4,
+#endif
+#endif
+ RIL_SOCKET_NUM
+} RIL_SOCKET_ID;
+
+
+typedef enum {
RIL_E_SUCCESS = 0,
RIL_E_RADIO_NOT_AVAILABLE = 1, /* If radio did not start or is resetting */
RIL_E_GENERIC_FAILURE = 2,
RADIO_TECH_EHRPD = 13,
RADIO_TECH_LTE = 14,
RADIO_TECH_HSPAP = 15, // HSPA+
- RADIO_TECH_GSM = 16 // Only supports voice
+ RADIO_TECH_GSM = 16, // Only supports voice
+ RADIO_TECH_TD_SCDMA = 17
} RIL_RadioTechnology;
// Do we want to split Data from Voice and the use
to point connections. */
} RIL_Data_Call_Response_v6;
+typedef struct {
+ int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
+ int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
+ back-off timer value RIL wants to override the one
+ pre-configured in FW.
+ The unit is miliseconds.
+ The value < 0 means no value is suggested.
+ The value 0 means retry should be done ASAP.
+ The value of INT_MAX(0x7fffffff) means no retry. */
+ int cid; /* Context ID, uniquely identifies this call */
+ int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
+ char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1.
+ For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
+ PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
+ such as "IP" or "IPV6" */
+ char * ifname; /* The network interface name */
+ char * addresses; /* A space-delimited list of addresses with optional "/" prefix length,
+ e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
+ May not be empty, typically 1 IPv4 or 1 IPv6 or
+ one of each. If the prefix length is absent the addresses
+ are assumed to be point to point with IPv4 having a prefix
+ length of 32 and IPv6 128. */
+ char * dnses; /* A space-delimited list of DNS server addresses,
+ e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+ May be empty. */
+ char * gateways; /* A space-delimited list of default gateway addresses,
+ e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
+ May be empty in which case the addresses represent point
+ to point connections. */
+ char * pcscf; /* the Proxy Call State Control Function address
+ via PCO(Protocol Configuration Option) for IMS client. */
+} RIL_Data_Call_Response_v9; // FIXME: Change to v10
+
typedef enum {
RADIO_TECH_3GPP = 1, /* 3GPP Technologies - GSM, WCDMA */
RADIO_TECH_3GPP2 = 2 /* 3GPP2 Technologies - CDMA */
typedef struct {
int sw1;
int sw2;
- char *simResponse; /* In hex string format ([a-fA-F0-9]*). */
+ char *simResponse; /* In hex string format ([a-fA-F0-9]*), except for SIM_AUTHENTICATION
+ response for which it is in Base64 format, see 3GPP TS 31.102 7.1.2 */
} RIL_SIM_IO_Response;
/* See also com.android.internal.telephony.gsm.CallForwardInfo */
* also: http://www.cellular-planningoptimization.com/2010/02/timing-advance-with-calculation.html */
} RIL_LTE_SignalStrength_v8;
+typedef struct {
+ int rscp; /* The Received Signal Code Power in dBm multipled by -1.
+ * Range : 25 to 120
+ * INT_MAX: 0x7FFFFFFF denotes invalid value.
+ * Reference: 3GPP TS 25.123, section 9.1.1.1 */
+} RIL_TD_SCDMA_SignalStrength;
+
/* Deprecated, use RIL_SignalStrength_v6 */
typedef struct {
RIL_GW_SignalStrength GW_SignalStrength;
RIL_LTE_SignalStrength_v8 LTE_SignalStrength;
} RIL_SignalStrength_v8;
+typedef struct {
+ RIL_GW_SignalStrength GW_SignalStrength;
+ RIL_CDMA_SignalStrength CDMA_SignalStrength;
+ RIL_EVDO_SignalStrength EVDO_SignalStrength;
+ RIL_LTE_SignalStrength_v8 LTE_SignalStrength;
+ RIL_TD_SCDMA_SignalStrength TD_SCDMA_SignalStrength;
+} RIL_SignalStrength_v10;
+
/** RIL_CellIdentityGsm */
typedef struct {
int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */
int tac; /* 16-bit tracking area code, INT_MAX if unknown */
} RIL_CellIdentityLte;
+/** RIL_CellIdentityTdscdma */
+typedef struct {
+ int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */
+ int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */
+ int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */
+ int cid; /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown */
+ int cpid; /* 8-bit Cell Parameters ID described in TS 25.331, 0..127, INT_MAX if unknown */
+} RIL_CellIdentityTdscdma;
+
/** RIL_CellInfoGsm */
typedef struct {
RIL_CellIdentityGsm cellIdentityGsm;
RIL_LTE_SignalStrength_v8 signalStrengthLte;
} RIL_CellInfoLte;
+/** RIL_CellInfoTdscdma */
+typedef struct {
+ RIL_CellIdentityTdscdma cellIdentityTdscdma;
+ RIL_TD_SCDMA_SignalStrength signalStrengthTdscdma;
+} RIL_CellInfoTdscdma;
+
// Must be the same as CellInfo.TYPE_XXX
typedef enum {
RIL_CELL_INFO_TYPE_GSM = 1,
RIL_CELL_INFO_TYPE_CDMA = 2,
RIL_CELL_INFO_TYPE_LTE = 3,
RIL_CELL_INFO_TYPE_WCDMA = 4,
+ RIL_CELL_INFO_TYPE_TD_SCDMA = 5
} RIL_CellInfoType;
// Must be the same as CellInfo.TIMESTAMP_TYPE_XXX
RIL_CellInfoCdma cdma;
RIL_CellInfoLte lte;
RIL_CellInfoWcdma wcdma;
+ RIL_CellInfoTdscdma tdscdma;
} CellInfo;
} RIL_CellInfo;
#define RIL_CDMA_MAX_NUMBER_OF_INFO_RECS 10
+#define RIL_HARDWARE_CONFIG_UUID_LENGTH 64
+
typedef struct {
char numberOfInfoRecs;
RIL_CDMA_InformationRecord infoRec[RIL_CDMA_MAX_NUMBER_OF_INFO_RECS];
char * value;
} RIL_NV_WriteItem;
+typedef enum {
+ HANDOVER_STARTED = 0,
+ HANDOVER_COMPLETED = 1,
+ HANDOVER_FAILED = 2,
+ HANDOVER_CANCELED = 3
+} RIL_SrvccState;
+
+/* hardware configuration reported to RILJ. */
+typedef enum {
+ RIL_HARDWARE_CONFIG_MODEM = 0,
+ RIL_HARDWARE_CONFIG_SIM = 1,
+} RIL_HardwareConfig_Type;
+
+typedef enum {
+ RIL_HARDWARE_CONFIG_STATE_ENABLED = 0,
+ RIL_HARDWARE_CONFIG_STATE_STANDBY = 1,
+ RIL_HARDWARE_CONFIG_STATE_DISABLED = 2,
+} RIL_HardwareConfig_State;
+
+typedef struct {
+ int rilModel;
+ uint32_t rat; /* bitset - ref. RIL_RadioTechnology. */
+ int maxVoice;
+ int maxData;
+ int maxStandby;
+} RIL_HardwareConfig_Modem;
+
+typedef struct {
+ char modemUuid[RIL_HARDWARE_CONFIG_UUID_LENGTH];
+} RIL_HardwareConfig_Sim;
+
+typedef struct {
+ RIL_HardwareConfig_Type type;
+ char uuid[RIL_HARDWARE_CONFIG_UUID_LENGTH];
+ RIL_HardwareConfig_State state;
+ union {
+ RIL_HardwareConfig_Modem modem;
+ RIL_HardwareConfig_Sim sim;
+ } cfg;
+} RIL_HardwareConfig;
+
+/**
+ * Data connection power state
+ */
+typedef enum {
+ RIL_DC_POWER_STATE_LOW = 1, // Low power state
+ RIL_DC_POWER_STATE_MEDIUM = 2, // Medium power state
+ RIL_DC_POWER_STATE_HIGH = 3, // High power state
+ RIL_DC_POWER_STATE_UNKNOWN = INT32_MAX // Unknown state
+} RIL_DcPowerStates;
+
+/**
+ * Data connection real time info
+ */
+typedef struct {
+ uint64_t time; // Time in nanos as returned by ril_nano_time
+ RIL_DcPowerStates powerState; // Current power state
+} RIL_DcRtInfo;
+
+/**
+ * Data profile to modem
+ */
+typedef struct {
+ /* id of the data profile */
+ int profileId;
+ /* the APN to connect to */
+ char* apn;
+ /** one of the PDP_type values in TS 27.007 section 10.1.1.
+ * For example, "IP", "IPV6", "IPV4V6", or "PPP".
+ */
+ char* protocol;
+ /** authentication protocol used for this PDP context
+ * (None: 0, PAP: 1, CHAP: 2, PAP&CHAP: 3)
+ */
+ int authType;
+ /* the username for APN, or NULL */
+ char* user;
+ /* the password for APN, or NULL */
+ char* password;
+ /* the profile type, TYPE_COMMON-0, TYPE_3GPP-1, TYPE_3GPP2-2 */
+ int type;
+ /* the period in seconds to limit the maximum connections */
+ int maxConnsTime;
+ /* the maximum connections during maxConnsTime */
+ int maxConns;
+ /** the required wait time in seconds after a successful UE initiated
+ * disconnect of a given PDN connection before the device can send
+ * a new PDN connection request for that given PDN
+ */
+ int waitTime;
+ /* true to enable the profile, 0 to disable, 1 to enable */
+ int enabled;
+} RIL_DataProfileInfo;
+
/**
* RIL_REQUEST_GET_SIM_STATUS
*
*/
#define RIL_REQUEST_NV_RESET_CONFIG 121
+ /** RIL_REQUEST_SET_UICC_SUBSCRIPTION
+ * FIXME This API needs to have more documentation.
+ *
+ * Selection/de-selection of a subscription from a SIM card
+ * "data" is const RIL_SelectUiccSub*
+
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE (radio resetting)
+ * GENERIC_FAILURE
+ * SUBSCRIPTION_NOT_SUPPORTED
+ *
+ */
+#define RIL_REQUEST_SET_UICC_SUBSCRIPTION 122
+
+/**
+ * RIL_REQUEST_ALLOW_DATA
+ *
+ * Tells the modem whether data calls are allowed or not
+ *
+ * "data" is int *
+ * FIXME slotId and aid will be added.
+ * ((int *)data)[0] is == 0 to allow data calls
+ * ((int *)data)[0] is == 1 to disallow data calls
+ *
+ * "response" is NULL
+ *
+ * Valid errors:
+ *
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE (radio resetting)
+ * GENERIC_FAILURE
+ *
+ */
+#define RIL_REQUEST_ALLOW_DATA 123
+
+/**
+ * RIL_REQUEST_GET_HARDWARE_CONFIG
+ *
+ * Request all of the current hardware (modem and sim) associated
+ * with the RIL.
+ *
+ * "data" is NULL
+ *
+ * "response" is an array of RIL_HardwareConfig.
+ */
+#define RIL_REQUEST_GET_HARDWARE_CONFIG 124
+
+/**
+ * RIL_REQUEST_SIM_AUTHENTICATION
+ *
+ * Returns the response of SIM Authentication through RIL to a
+ * challenge request.
+ *
+ * "data" Base64 encoded string containing challenge:
+ * int authContext; P2 value of authentication command, see P2 parameter in
+ * 3GPP TS 31.102 7.1.2
+ * char *authData; the challenge string in Base64 format, see 3GPP
+ * TS 31.102 7.1.2
+ * char *aid; AID value, See ETSI 102.221 8.1 and 101.220 4,
+ * NULL if no value
+ *
+ * "response" Base64 encoded strings containing response:
+ * int sw1; Status bytes per 3GPP TS 31.102 section 7.3
+ * int sw2;
+ * char *simResponse; Response in Base64 format, see 3GPP TS 31.102 7.1.2
+ */
+#define RIL_REQUEST_SIM_AUTHENTICATION 125
+
+/**
+ * RIL_REQUEST_GET_DC_RT_INFO
+ *
+ * Requests the Data Connection Real Time Info
+ *
+ * "data" is NULL
+ *
+ * "response" is the most recent RIL_DcRtInfo
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE
+ * GENERIC_FAILURE
+ *
+ * See also: RIL_UNSOL_DC_RT_INFO_CHANGED
+ */
+#define RIL_REQUEST_GET_DC_RT_INFO 126
+
+/**
+ * RIL_REQUEST_SET_DC_RT_INFO_RATE
+ *
+ * This is the minimum number of milliseconds between successive
+ * RIL_UNSOL_DC_RT_INFO_CHANGED messages and defines the highest rate
+ * at which RIL_UNSOL_DC_RT_INFO_CHANGED's will be sent. A value of
+ * 0 means send as fast as possible.
+ *
+ * "data" The number of milliseconds as an int
+ *
+ * "response" is null
+ *
+ * Valid errors:
+ * SUCCESS must not fail
+ */
+#define RIL_REQUEST_SET_DC_RT_INFO_RATE 127
+/**
+ * RIL_REQUEST_SET_DATA_PROFILE
+ *
+ * Set data profile in modem
+ * "data" is an const RIL_DataProfileInfo **
+ * "datalen" is count * sizeof(const RIL_DataProfileInfo *)
+ * "response" is NULL
+ *
+ * Valid errors:
+ * SUCCESS
+ * RADIO_NOT_AVAILABLE (radio resetting)
+ * GENERIC_FAILURE
+ * SUBSCRIPTION_NOT_AVAILABLE
+ */
+#define RIL_REQUEST_SET_DATA_PROFILE 128
/***********************************************************************/
*/
#define RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED 1037
+/**
+ * RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED
+ *
+ * Indicated when there is a change in subscription status.
+ * This event will be sent in the following scenarios
+ * - subscription readiness at modem, which was selected by telephony layer
+ * - when subscription is deactivated by modem due to UICC card removal
+ * - When network invalidates the subscription i.e. attach reject due to authentication reject
+ *
+ * "data" is const int *
+ * ((const int *)data)[0] == 0 for Subscription Deactivated
+ * ((const int *)data)[0] == 1 for Subscription Activated
+ *
+ */
+#define RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED 1038
+
+/**
+ * RIL_UNSOL_SRVCC_STATE_NOTIFY
+ *
+ * Called when Single Radio Voice Call Continuity(SRVCC)
+ * progress state has changed
+ *
+ * "data" is int *
+ * ((int *)data)[0] is of type const RIL_SrvccState
+ *
+ */
+
+#define RIL_UNSOL_SRVCC_STATE_NOTIFY 1039
+
+/**
+ * RIL_UNSOL_HARDWARE_CONFIG_CHANGED
+ *
+ * Called when the hardware configuration associated with the RILd changes
+ *
+ * "data" is an array of RIL_HardwareConfig
+ *
+ */
+#define RIL_UNSOL_HARDWARE_CONFIG_CHANGED 1040
+
+/**
+ * RIL_UNSOL_DC_RT_INFO_CHANGED
+ *
+ * Sent when the DC_RT_STATE changes but the time
+ * between these messages must not be less than the
+ * value set by RIL_REQUEST_SET_DC_RT_RATE.
+ *
+ * "data" is the most recent RIL_DcRtInfo
+ *
+ */
+#define RIL_UNSOL_DC_RT_INFO_CHANGED 1041
+
/***********************************************************************/
+#if defined(ANDROID_MULTI_SIM)
+/**
+ * RIL_Request Function pointer
+ *
+ * @param request is one of RIL_REQUEST_*
+ * @param data is pointer to data defined for that RIL_REQUEST_*
+ * data is owned by caller, and should not be modified or freed by callee
+ * @param t should be used in subsequent call to RIL_onResponse
+ * @param datalen the length of data
+ *
+ */
+typedef void (*RIL_RequestFunc) (int request, void *data,
+ size_t datalen, RIL_Token t, RIL_SOCKET_ID socket_id);
+
+/**
+ * This function should return the current radio state synchronously
+ */
+typedef RIL_RadioState (*RIL_RadioStateRequest)(RIL_SOCKET_ID socket_id);
+
+#else
+/* Backward compatible */
/**
* RIL_Request Function pointer
*/
typedef RIL_RadioState (*RIL_RadioStateRequest)();
+#endif
+
+
/**
* This function returns "1" if the specified RIL_REQUEST code is
* supported and 0 if it is not
char *password;
} RIL_InitialAttachApn;
+typedef struct {
+ int authContext; /* P2 value of authentication command, see P2 parameter in
+ 3GPP TS 31.102 7.1.2 */
+ char *authData; /* the challenge string in Base64 format, see 3GPP
+ TS 31.102 7.1.2 */
+ char *aid; /* AID value, See ETSI 102.221 8.1 and 101.220 4,
+ NULL if no value. */
+} RIL_SimAuthentication;
+
#ifdef RIL_SHLIB
struct RIL_Env {
/**
void (*OnRequestComplete)(RIL_Token t, RIL_Errno e,
void *response, size_t responselen);
+#if defined(ANDROID_MULTI_SIM)
/**
* "unsolResponse" is one of RIL_UNSOL_RESPONSE_*
* "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_*
*
* "data" is owned by caller, and should not be modified or freed by callee
*/
-
- void (*OnUnsolicitedResponse)(int unsolResponse, const void *data,
- size_t datalen);
-
+ void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen, RIL_SOCKET_ID socket_id);
+#else
+ /**
+ * "unsolResponse" is one of RIL_UNSOL_RESPONSE_*
+ * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_*
+ *
+ * "data" is owned by caller, and should not be modified or freed by callee
+ */
+ void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen);
+#endif
/**
* Call user-specifed "callback" function on on the same thread that
* RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies
void RIL_onRequestComplete(RIL_Token t, RIL_Errno e,
void *response, size_t responselen);
+#if defined(ANDROID_MULTI_SIM)
/**
* @param unsolResponse is one of RIL_UNSOL_RESPONSE_*
* @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_*
*/
void RIL_onUnsolicitedResponse(int unsolResponse, const void *data,
- size_t datalen);
+ size_t datalen, RIL_SOCKET_ID socket_id);
+#else
+/**
+ * @param unsolResponse is one of RIL_UNSOL_RESPONSE_*
+ * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_*
+ * "data" is owned by caller, and should not be modified or freed by callee
+ * @param datalen the length of data in byte
+ */
+void RIL_onUnsolicitedResponse(int unsolResponse, const void *data,
+ size_t datalen);
+#endif
/**
* Call user-specifed "callback" function on on the same thread that
OSDN Git Service
