extern "C" {
#endif
-#define RIL_VERSION 2
+#define RIL_VERSION 3
#define CDMA_ALPHA_INFO_BUFFER_LENGTH 64
#define CDMA_NUMBER_INFO_BUFFER_LENGTH 81
RIL_E_SUBSCRIPTION_NOT_AVAILABLE = 12, /* fail to find CDMA subscription from specified
location */
RIL_E_MODE_NOT_SUPPORTED = 13, /* HW does not support preferred network type */
- RIL_E_FDN_CHECK_FAILURE = 14 /* command failed because recipient is not on FDN list */
+ RIL_E_FDN_CHECK_FAILURE = 14, /* command failed because recipient is not on FDN list */
+ RIL_E_ILLEGAL_SIM_OR_ME = 15 /* network selection failed due to
+ illegal SIM or ME */
} RIL_Errno;
typedef enum {
RADIO_STATE_NV_READY = 9 /* Radio is on and the NV interface is available */
} RIL_RadioState;
- /* CDMA Signal Information Record as defined in C.S0005 section 3.7.5.5 */
+/* User-to-User signaling Info activation types derived from 3GPP 23.087 v8.0 */
+typedef enum {
+ RIL_UUS_TYPE1_IMPLICIT = 0,
+ RIL_UUS_TYPE1_REQUIRED = 1,
+ RIL_UUS_TYPE1_NOT_REQUIRED = 2,
+ RIL_UUS_TYPE2_REQUIRED = 3,
+ RIL_UUS_TYPE2_NOT_REQUIRED = 4,
+ RIL_UUS_TYPE3_REQUIRED = 5,
+ RIL_UUS_TYPE3_NOT_REQUIRED = 6
+} RIL_UUS_Type;
+
+/* User-to-User Signaling Information data coding schemes. Possible values for
+ * Octet 3 (Protocol Discriminator field) in the UUIE. The values have been
+ * specified in section 10.5.4.25 of 3GPP TS 24.008 */
+typedef enum {
+ RIL_UUS_DCS_USP = 0, /* User specified protocol */
+ RIL_UUS_DCS_OSIHLP = 1, /* OSI higher layer protocol */
+ RIL_UUS_DCS_X244 = 2, /* X.244 */
+ RIL_UUS_DCS_RMCF = 3, /* Reserved for system mangement
+ convergence function */
+ RIL_UUS_DCS_IA5c = 4 /* IA5 characters */
+} RIL_UUS_DCS;
+
+/* User-to-User Signaling Information defined in 3GPP 23.087 v8.0
+ * This data is passed in RIL_ExtensionRecord and rec contains this
+ * structure when type is RIL_UUS_INFO_EXT_REC */
+typedef struct {
+ RIL_UUS_Type uusType; /* UUS Type */
+ RIL_UUS_DCS uusDcs; /* UUS Data Coding Scheme */
+ int uusLength; /* Length of UUS Data */
+ char * uusData; /* UUS Data */
+} RIL_UUS_Info;
+
+/* CDMA Signal Information Record as defined in C.S0005 section 3.7.5.5 */
typedef struct {
char isPresent; /* non-zero if signal information record is present */
char signalType; /* as defined 3.7.5.5-1 */
int numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */
char * name; /* Remote party name */
int namePresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */
+ RIL_UUS_Info * uusInfo; /* NULL or Pointer to User-User Signaling Information */
} RIL_Call;
typedef struct {
* clir == 1 on "CLIR invocation" (restrict CLI presentation)
* clir == 2 on "CLIR suppression" (allow CLI presentation)
*/
+ RIL_UUS_Info * uusInfo; /* NULL or Pointer to User-User Signaling Information */
} RIL_Dial;
typedef struct {
/* See RIL_REQUEST_LAST_CALL_FAIL_CAUSE */
typedef enum {
+ CALL_FAIL_UNOBTAINABLE_NUMBER = 1,
CALL_FAIL_NORMAL = 16,
CALL_FAIL_BUSY = 17,
CALL_FAIL_CONGESTION = 34,
* 3 - Registration denied
* 4 - Unknown
* 5 - Registered, roaming
+ * 10 - Same as 0, but indicates that emergency calls
+ * are enabled.
+ * 12 - Same as 2, but indicates that emergency calls
+ * are enabled.
+ * 13 - Same as 3, but indicates that emergency calls
+ * are enabled.
+ * 14 - Same as 4, but indicates that emergency calls
+ * are enabled.
+ *
* ((const char **)response)[1] is LAC if registered on a GSM/WCDMA system or
* NULL if not.Valid LAC are 0x0000 - 0xffff
* ((const char **)response)[2] is CID if registered on a * GSM/WCDMA or
* 0 - Unknown, 1 - GPRS, 2 - EDGE, 3 - UMTS,
* 4 - IS95A, 5 - IS95B, 6 - 1xRTT,
* 7 - EvDo Rev. 0, 8 - EvDo Rev. A,
- * 9 - HSDPA, 10 - HSUPA, 11 - HSPA
+ * 9 - HSDPA, 10 - HSUPA, 11 - HSPA,
+ * 12 - EVDO Rev B
* ((const char **)response)[4] is Base Station ID if registered on a CDMA
* system or NULL if not. Base Station ID in
* decimal format
* ((const char **)response)[5] is Base Station latitude if registered on a
* CDMA system or NULL if not. Base Station
- * latitude in hexadecimal format
+ * latitude is a decimal number as specified in
+ * 3GPP2 C.S0005-A v6.0. It is represented in
+ * units of 0.25 seconds and ranges from -1296000
+ * to 1296000, both values inclusive (corresponding
+ * to a range of -90° to +90°).
* ((const char **)response)[6] is Base Station longitude if registered on a
* CDMA system or NULL if not. Base Station
- * longitude in hexadecimal format
+ * longitude is a decimal number as specified in
+ * 3GPP2 C.S0005-A v6.0. It is represented in
+ * units of 0.25 seconds and ranges from -2592000
+ * to 2592000, both values inclusive (corresponding
+ * to a range of -180° to +180°).
* ((const char **)response)[7] is concurrent services support indicator if
* registered on a CDMA system 0-1.
* 0 - Concurrent services not supported,
* 8 - No Suitable Cells in this Location Area
* 9 - Network failure
* 10 - Persistent location update reject
+ * ((const char **)response)[14] is the Primary Scrambling Code of the current
+ * cell as described in TS 25.331, in hexadecimal
+ * format, or NULL if unknown or not registered
+ * to a UMTS network.
*
* Please note that registration state 4 ("unknown") is treated
* as "out of service" in the Android telephony system
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * ILLEGAL_SIM_OR_ME
* GENERIC_FAILURE
*
+ * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and
+ * no retries needed, such as illegal SIM or ME.
+ * Returns GENERIC_FAILURE for all other causes that might be
+ * fixed by retries.
+ *
*/
#define RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC 46
* Valid errors:
* SUCCESS
* RADIO_NOT_AVAILABLE
+ * ILLEGAL_SIM_OR_ME
* GENERIC_FAILURE
*
+ * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and
+ * no retries needed, such as illegal SIM or ME.
+ * Returns GENERIC_FAILURE for all other causes that might be
+ * fixed by retries.
+ *
*/
#define RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL 47
*
* Indicates the current state of the screen. When the screen is off, the
* RIL should notify the baseband to suppress certain notifications (eg,
- * signal strength and changes in LAC or CID) in an effort to conserve power.
- * These notifications should resume when the screen is on.
+ * signal strength and changes in LAC/CID or BID/SID/NID/latitude/longitude)
+ * in an effort to conserve power. These notifications should resume when the
+ * screen is on.
*
* "data" is int *
* ((int *)data)[0] is == 1 for "Screen On"
* RIL_REQUEST_SET_LOCATION_UPDATES
*
* Enables/disables network state change notifications due to changes in
- * LAC and/or CID (basically, +CREG=2 vs. +CREG=1).
+ * LAC and/or CID (for GSM) or BID/SID/NID/latitude/longitude (for CDMA).
+ * Basically +CREG=2 vs. +CREG=1 (TS 27.007).
*
* Note: The RIL implementation should default to "updates enabled"
* when the screen is on and "updates disabled" when the screen is off.
*/
#define RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING 103
-
/***********************************************************************/
*/
#define RIL_UNSOL_RINGBACK_TONE 1029
+/**
+ * RIL_UNSOL_RESEND_INCALL_MUTE
+ *
+ * Indicates that framework/application need reset the uplink mute state.
+ *
+ * There may be situations where the mute state becomes out of sync
+ * between the application and device in some GSM infrastructures.
+ *
+ * "data" is null
+ */
+#define RIL_UNSOL_RESEND_INCALL_MUTE 1030
/***********************************************************************/
OSDN Git Service
