PACKAGE_VERSION := @PACKAGE_VERSION@
# Written by Keith Marshall <keithmarshall@users.sourceforge.net>
-# Copyright (C) 2014, MinGW.org Project
+# Copyright (C) 2014-2017, MinGW.org Project
#
#
# Permission is hereby granted, free of charge, to any person obtaining a
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
-#
+#
# The above copyright notice and this permission notice (including the next
# paragraph) shall be included in all copies or substantial portions of the
# Software.
-#
+#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# inadvertent override from any included file.
#
all:
-PACKAGE_RELEASE :=
+PACKAGE_RELEASE :=
PACKAGE_RELEASE_TAG := $(PACKAGE_VERSION)$(PACKAGE_RELEASE:%=-%)-mingw32
-NTDDI_VERSION_SPEC := -D NTDDI_VERSION=0x04000000
+
+# Establish the minimum version of Windows which this build is required
+# to support; note that we fix the default as WinNT4, but we define it in
+# a manner which will allow a command line override, and may be adapted,
+# ultimately, to support a configure time assignment.
+#
+NTDDI_VERSION := NTDDI_WINNT4
+NTDDI_VERSION_SPEC := $(NTDDI_VERSION:%=-D NTDDI_VERSION=%)
# Build paths and macros.
#
NM = @NM@
all: @DEFAULT_MAKECMDGOALS@
+all-mingwrt-stage-1-only: _mingw.h w32api.h
all-mingwrt-stage-1-only: all-mingwrt-objects all-mingwrt-libs
all-mingwrt-stage-1-and-2: all-mingwrt-stage-1-only all-mingwrt-dll
all-mingwrt: all-mingwrt-stage-1-and-2
man3ext = 3
INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
+INSTALL_DATA = @INSTALL_DATA@ $1 $2
-mkinstalldirs = @MKDIR_P@
+mkinstalldirs = @MKDIR_P@ $(addprefix $1,$2)
+LN_S = @LN_S@
# Keep the configuration in a consistent state. Note that we assume
-# that configure has been run initially, (otherwise we wouldn't have
+# that configure has been run initially, (otherwise we wouldn't have
# a Makefile to begin with); since this also creates config.status,
# we may normally assume that it is already available ...
#
# If configure itself needs to be updated, we must run autoconf in the
# top level source directory.
#
-vpath %.m4 ${top_srcdir}
vpath configure.ac ${top_srcdir}
-configure: configure.ac aclocal.m4
- cd ${top_srcdir}; autoconf
+vpath %.m4 ${top_srcdir}/.. ${top_srcdir}
+configure: configure.ac aclocal.m4 VERSION.m4
+ cd ${top_srcdir}; autoconf -I ..
+
+# Propagate package version, as configured, consistently throughout
+# the package build.
+#
+vpath _mingw.h.in ${top_srcdir}/include
+vpath w32api.h.in ${w32api_srcdir}/include
+
+_mingw.h w32api.h: configure.ac
+
+PACKAGE_VERSION_SCRIPT = sed \
+ -e s"`$(call PACKAGE_VERSION_FORMAT,LONG,%d,$$3+1000*($$2+1000*$$1))`" \
+ -e s"`$(call PACKAGE_VERSION_FORMAT,MAJOR,%7d,$$1)`" \
+ -e s"`$(call PACKAGE_VERSION_FORMAT,MINOR,%7d,$$2)`" \
+ -e s"`$(call PACKAGE_VERSION_FORMAT,PATCH,%7d,$$3)`"
+
+PACKAGE_VERSION_FORMAT = echo $(PACKAGE_VERSION).0.0 | awk -F. '{ \
+ printf ",%%PACKAGE_VERSION_$1%%,$2,", $3; \
+}'
+
+_mingw.h w32api.h: %.h: %.h.in
+ $(PACKAGE_VERSION_SCRIPT) $< > $@
# Capture dependencies conveyed within source files, ensuring that
# header files are taken from our working source tree, and not from
-I ${top_srcdir} -I ${top_srcdir}/profile -iwithprefixbefore include
ALL_CFLAGS = $(CFLAGS) $(DEPFLAGS) $(INCLUDES) $(NTDDI_VERSION_SPEC)
+ALL_CPPFLAGS = $(CPPFLAGS) $(DEPFLAGS) $(INCLUDES) $(NTDDI_VERSION_SPEC)
# The general case, for compiling object files from C source,
# requires a small adjustment to the default implicit rule.
$(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) -D__CRTDLL__ -o $@ $<
# ...while, for the current build case, we need an explicit mapping
-# to identify the disparately named source file.
+# to identify the disparately named source file...
#
$(addsuffix .$(OBJEXT), crt2 dllcrt2): %2.$(OBJEXT): %1.c
$(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) -o $@ $<
+# ...and for the pair of default FPU configuration selectors, we
+# need to pass the configuration specification to the compiler, when
+# compiling the common source for each of the two cases.
+#
+CRT_fp8.$(OBJEXT) CRT_fp10.$(OBJEXT): CRT_fp%.$(OBJEXT): CRT_fenv.c
+ $(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) -D_CRT_FE_DFL_ENV=$* -o $@ $<
+
# The initialization hook for profiling code is inherited from Cygwin,
# where it is built as gcrt0.$(OBJEXT); we build it, unmodified, as each
# of gcrt1.$(OBJEXT) and gcrt2.$(OBJEXT), to satisfy the differing GCC
#
msvcrt_versions := 70 71 80 90 100
msvcrt_version_script = echo $1 | awk '\
- { printf "0x%03d0", gensub( "^[^1-9]*([0-9]*).*", "\\\\1", 1 ) \
+ { printf "0x%03d00000", gensub( "^[^1-9]*([0-9]*).*", "\\\\1", 1 ) \
}'
extra_objects_filter = $(filter %.$(OBJEXT),$1)
# definition file, from a common source.
#
.SUFFIXES: .def.in .def
-$(addsuffix .def,$(all_msvcrt)): %.def: ${mingwrt_srcdir}/msvcrt.def.in
- $(CC) -C -E -P -D__FILENAME__=$@ -D__$*__=1 \
+vpath %.def.in ${mingwrt_srcdir}/msvcrt-xref
+$(addsuffix .def,$(all_msvcrt)): %.def: msvcrt.def.in
+ $(CC) -E -P -D__FILENAME__=$@ -D__DLLNAME__=$* \
-D__MSVCRT_VERSION__=`$(call msvcrt_version_script,$*)` \
-xc-header $< > $@
# To accommodate the __USE_MINGW_ANSI_STDIO feature, as specified
# in _mingw.h and stdio.h, while retaining a mechanism for accessing
-# the MSVCRT.DLL functions which it replaces, we augment our import
+# the MSVCRT.DLL functions which it replaces, we augment our import
# libraries with extra, alternatively named entry points, each of
# which implements a vectored jump to the regular entry point for
# the DLL implementation of its corresponding replaced function.
# Microsoft DLLs, but which nevertheless are easily emulated.
#
$(foreach name,coldname $(all_moldname),lib$(name).a): $(addsuffix .$(OBJEXT), \
- isascii iscsym iscsymf strcasecmp strncasecmp toascii wcscmpi)
+ isascii iscsym iscsymf toascii)
+
+# Selected versions of the oldname libraries also provide a
+# convenient vehicle for delivery of stubs, emulating functions
+# which appear in later MSVCRT versions, and which we also wish
+# to support in conjunction with earlier versions.
+#
+$(foreach name,moldname $(addprefix moldname,70 71),lib$(name).a) \
+$(foreach name,moldname $(addprefix moldname,70 71),lib$(name)d.a): \
+ strnlen.jmpstub.$(OBJEXT) wcsnlen.jmpstub.$(OBJEXT)
coldname.def: %.def: ${mingwrt_srcdir}/moldname.def.in
$(CC) -C -E -P -D__FILENAME__=$@ -D__CRTDLL__ -xc-header $< > $@
nearbyint nearbyintf nearbyintl nextafterf nextafterl nexttoward nexttowardf \
powf powl powi powif powil remainder remainderf remainderl remquo remquof \
remquol rint rintf rintl round roundf roundl scalbn scalbnf scalbnl signbit \
- signbitf signbitl sqrtf sqrtl tgamma tgammaf tgammal trunc truncf truncl)
+ signbitf signbitl sqrtf sqrtl tgamma tgammaf tgammal trunc truncf truncl \
+ x87cvt x87cvtf x87log x87log1p x87pow)
# Replacement I/O functions in libmingwex.a, providing better POSIX
# compatibility than their Microsoft equivalents.
#
vpath %.c ${mingwrt_srcdir}/mingwex/stdio
-libmingwex.a: $(addsuffix .$(OBJEXT), btowc fprintf fseeko64 pformat \
- printf snprintf snwprintf sprintf vfprintf vfscanf vfwscanf vprintf \
- vscanf vsnprintf vsnwprintf vsprintf vsscanf vswscanf vwscanf)
+libmingwex.a: $(addsuffix .$(OBJEXT), btowc fprintf fseeko64 ofmtctl pformat \
+ printf snprintf sprintf vfprintf vfscanf vfwscanf vprintf vscanf vsnprintf \
+ vsprintf vsscanf vswscanf vwscanf)
# pformat.$(OBJEXT) needs an explicit build rule, since we need to
# specify an additional header file path.
# Some additional miscellaneous functions, in libmingwex.a
#
-#libmingwex.a: $(addsuffix .$(OBJEXT), glob membarrier)
libmingwex.a: $(addsuffix .$(OBJEXT), mingw-aligned-malloc mingw-fseek)
libmingwex.a: $(addsuffix .$(OBJEXT), glob getopt basename dirname nsleep)
-libmingwex.a: $(addsuffix .$(OBJEXT), mkstemp mkdtemp cryptnam)
+libmingwex.a: $(addsuffix .$(OBJEXT), mkstemp mkdtemp cryptnam setenv)
libmingwex.a: $(addsuffix .$(OBJEXT), tdelete tfind tsearch twalk)
+libmingwex.a: $(addsuffix .$(OBJEXT), dirent wdirent dlfcn strerror_r)
+libmingwex.a: $(addsuffix .$(OBJEXT), getdelim gettimeofday)
-libmingwex.a: gettimeofday.$(OBJEXT)
-libmingwex.a: $(addsuffix .$(OBJEXT), dirent wdirent dlfcn)
+vpath %.s ${mingwrt_srcdir}/mingwex
+vpath %.sx ${mingwrt_srcdir}/mingwex
+libmingwex.a: $(addsuffix .$(OBJEXT), fwide mbrtowc mbsinit strnlen wcrtomb \
+ wcsnlen wcstof wcstold wctob wctrans wctype wmemchr wmemcmp wmemcpy wmemmove \
+ wmemset)
-libmingwex.a: $(addsuffix .$(OBJEXT), fwide mbrtowc mbsinit wcrtomb wcstof \
- wcstold wctob wmemchr wmemcmp wmemcpy wmemmove wmemset)
-
-libmingwex.a: $(addsuffix .$(OBJEXT), wctrans wctype)
+# The wcsnlen() function, enumerated above, is an adaptation of strnlen();
+# we need a specific rule to compile it, from shared source.
+#
+wcsnlen.$(OBJEXT): strnlen.sx
+ $(COMPILE.sx) -D_UNICODE $^ -o $@
# For the math sources, we support the convention that a single
# quux_generic.c source file will produce three objects: quux.o,
$(addsuffix .$(OBJEXT), llround llroundf llroundl): %.$(OBJEXT): lround_generic.c
$(CC) -c -D FUNCTION=$* $(CPPFLAGS) $(ALL_CFLAGS) -o $@ $<
+# Similarly, we may need to compile quux.o, quuxf.o, and quuxl.o
+# variants from a common quux_generic.sx assembly language file.
+#
+vpath %.sx ${mingwrt_srcdir}/mingwex/math
+$(addsuffix .$(OBJEXT), % %f %l): %_generic.sx
+ $(CC) -c -D_$*_source $(ALL_CPPFLAGS) $(ASFLAGS) -o $*.$(OBJEXT) $<
+ $(CC) -c -D_$*f_source $(ALL_CPPFLAGS) $(ASFLAGS) -o $*f.$(OBJEXT) $<
+ $(CC) -c -D_$*l_source $(ALL_CPPFLAGS) $(ASFLAGS) -o $*l.$(OBJEXT) $<
+
+# Several generically implemented functions also require separate
+# assembly of their generic back-end support routines.
+#
+x87%.$(OBJEXT): %_generic.sx
+ $(CC) -c $(ALL_CPPFLAGS) $(ASFLAGS) -o $@ $<
+
# Historically, MinGW.org's libm.a has been a dummy, delivering
# nothing of value; FIXME: IMO, this sucks; it should deliver the
# non-MSVCRT.DLL math functions, as noted above.
# entry points as stubs in libmingwex.a, via the following rules:
#
sinclude Makefile.stub
-vpath jmpstub.sx ${mingwrt_srcdir}/mingwex
libstub_refnames = grep -lr '__$1.*FUNCTION *=' ${mingwrt_srcdir}
jmpstub_prerequisites := $(shell $(call libstub_refnames,JMPSTUB)/include)
libimpl_prerequisites := $(shell $(call libstub_refnames,LIBIMPL)/include)
fmt = "\nlib%s.a: %s\n%s: jmpstub.sx\n\t$$(COMPILE.sx) %s -o $$@ $$^\n"; \
} \
/__JMPSTUB(__)? *[(].*FUNCTION/ { \
- LIB = "mingwex"; \
FUNCTION = gensub( ".*[ ,(:]FUNCTION *= *"symbol".*", "\\1", 1 ); \
+ LIB = match( $$0, ".*[ ,(:]LIB *= *"symbol, altlib ) ? altlib[1] : "mingwex"; \
OBJNAME = gensub( "_*(.*)_*", "\\1", 1, FUNCTION )".jmpstub.$$(OBJEXT)"; \
OBJNAME_CFLAGS = "-D FUNCTION="FUNCTION; \
- if( match( $$0, ".*[ ,(:]REMAPPED *= *"symbol, alias ) ) \
+ if( match( $$0, ".*[ ,(:]DLLENTRY *= *"symbol, alias ) ) \
+ OBJNAME_CFLAGS = OBJNAME_CFLAGS" -D DLLENTRY="alias[1]; \
+ else if( match( $$0, ".*[ ,(:]REMAPPED *= *"symbol, alias ) ) \
OBJNAME_CFLAGS = OBJNAME_CFLAGS" -D REMAPPED="alias[1]; \
printf fmt, LIB, OBJNAME, OBJNAME, OBJNAME_CFLAGS; \
} \
fmt = "\nlib%s.a: %s\n%s.libimpl: %s\n"; \
} \
/__LIBIMPL(__)? *[(].*FUNCTION/ { \
- LIB = "mingwex"; \
FUNCTION = gensub( ".*[ ,(:]FUNCTION *= *"symbol".*", "\\1", 1 ); \
+ LIB = match( $$0, ".*[ ,(:]LIB *= *"symbol, altlib ) ? altlib[1] : "mingwex"; \
OBJNAME = gensub( "_*(.*)_*", "\\1", 1, FUNCTION )".libimpl.$$(OBJEXT)"; \
printf fmt, LIB, OBJNAME, FUNCTION, FILENAME; \
} \
libgmon.a: $(addsuffix .$(OBJEXT), gmon mcount profil)
+# Optional DLL Generation Rules
+# -----------------------------
+#
+# The following rules are provided to accommodate optional delivery
+# of certain of the static libraries, generated as components of this
+# package, in the alternative form of DLLs, each with an accompanying
+# import library. Each such DLL should be versioned, ideally with an
+# explicitly specified version number, but we provide this fall back
+# as a catch-all default for any which is not so specified; (all such
+# version specifications should be in the "current:revision:age" form,
+# conforming to the GNU-libtool convention).
+#
+DLLVERSION = "0:0:0"
+
+# Generally, we should prefer to have explicit version specifications,
+# relating individually to each DLL; these are specified in VERSION.m4,
+# and propagated here via configure time substitution.
+#
+@MAP_LIBMINGWEX_A_DLLVERSION@
+
+# For convenience, we implement the DLL build rule in the form of a
+# generic pattern rule, invoked in the form of a request to build any
+# version-agnostic import library; the versioned DLL is then built as
+# a side effect of building the import library.
+#
+# Note that, in addition to the obvious dependency on the originating
+# static library, we also make this depend on configure; this ensures
+# that DLL version changes, specified in VERSION.m4, are propagated.
+#
+# Further note that we use an alternatively named reference link to
+# the originating static library, as code source for the DLL, rather
+# than the original name; this is to work around a limitation of the
+# handling of --whole-archive, by GNU-ld, which suppresses creation
+# of an exports table, in the event that the same static library is
+# named among GCC's implicit default libraries, after reverting to
+# --no-whole-archive operation.
+#
+%.dll.a: %.a configure
+ $(LN_S) -f $< tmp$<
+ $(CC) $(call a2dll,tmp$<,$(call dllname,$*)) -L. -Wl,--out-implib=$@
+ $(RM) tmp$<
+
+dllname = $1-$(dllsuffix).dll $(LIBGCC_LINK_OPTION)
+a2dll = -shared -o $2 -Wl,--whole-archive $1 -Wl,--no-whole-archive
+dllsuffix = `echo $(DLLVERSION) | awk -F: '{printf "%d",$$1-$$3}'`
+
+all-optional-dlls: all-mingwrt-optional-dlls
+all-mingwrt-optional-dlls: libmingwex.dll.a
+
+# In most optional DLL build cases, we should avoid creating any
+# unnecessary dependency on (known to be broken) -shared-libgcc
+#
+libmingwex.dll.a: LIBGCC_LINK_OPTION = -static-libgcc
+
+
# Installation Rules
# ------------------
#
@test -z "$(strip ${DESTDIR})" || case $($@) in ${DESTDIR}?:*) \
$(MAKE) --no-print-directory reject=$@ DESTDIR-UNSUPPORTED;; \
esac
- $(mkinstalldirs) $($@)
+ $(call mkinstalldirs,,$($@))
# Note: we MUST use a recursive make invocation here, as the
# "error" function within the accompanying diagnostics would be
install-stage-1-and-2: install-stage-1-only install-bin
install-gcc: install-stage-1-only
+install-strip: install-strip-mingwrt
+install-strip-%:
+ $(MAKE) --no-print-directory \
+ STRIP_DATA='cd ${libdir}; $(STRIP) --strip-unneeded $$1' \
+ STRIP_DLL='cd ${bindir}; $(STRIP) $$1' install-$*
+
# Install licence files.
#
install-license: install-mingwrt-license
#
install-mingwrt-license install-w32api-license: install-%: docdir %-files
%-license-files:
- $(mkinstalldirs) ${docdir}/$*/$(PACKAGE_VERSION)
- $(INSTALL_DATA) $^ ${docdir}/$*/$(PACKAGE_VERSION)
+ $(call mkinstalldirs,,${docdir}/$*/$(PACKAGE_VERSION))
+ $(call INSTALL_DATA,$^,${docdir}/$*/$(PACKAGE_VERSION))
# Install headers associated with the MinGW runtime libraries.
#
includedirs: mingwrt-includedirs
install-headers install-mingwrt: install-mingwrt-headers
-${includedir}/sys ${includedir}/parts: includedir
-mingwrt-includedirs: ${includedir}/sys ${includedir}/parts
- $(mkinstalldirs) $^
+mingwrt-includedirs: includedir $(eval mingwrt_include_subdirs=sys parts)
+ $(call mkinstalldirs,${includedir}/,$(mingwrt_include_subdirs))
-install-mingwrt-headers: mingwrt-includedirs
- $(INSTALL_DATA) ${mingwrt_srcdir}/include/*.h ${includedir}
- $(INSTALL_DATA) ${mingwrt_srcdir}/include/sys/*.h ${includedir}/sys
- $(INSTALL_DATA) ${mingwrt_srcdir}/include/parts/*.h ${includedir}/parts
- $(INSTALL_DATA) ${mingwrt_srcdir}/profile/*.h ${includedir}
+SUB_HEADERS_PRESENT = echo $1/include/$2/*.h | grep -v '[*]' > /dev/null
+INSTALL_SUB_HEADERS = $(call INSTALL_DATA,$1/include/$2/*.h,${includedir}/$2)
+
+install-mingwrt-headers: _mingw.h mingwrt-includedirs
+ $(call INSTALL_DATA,_mingw.h,${includedir})
+ $(call INSTALL_DATA,${mingwrt_srcdir}/include/*.h,${includedir})
+ for dir in $(mingwrt_include_subdirs); do \
+ if $(call SUB_HEADERS_PRESENT,${mingwrt_srcdir},$$dir); then \
+ $(call INSTALL_SUB_HEADERS,${mingwrt_srcdir},$$dir); \
+ fi; \
+ done
+ $(call INSTALL_DATA,${mingwrt_srcdir}/profile/*.h,${includedir})
# Install libraries, and supporting free standing object files.
#
install-crt-objects install-deprecated-crt-objects \
install-mingwrt-libs install-deprecated-mingwrt-libs:
- $(INSTALL_DATA) $^ ${libdir}
+ $(call INSTALL_DATA,$^,${libdir})
+ $(if $(STRIP_DATA),$(call STRIP_DATA,$^))
+
# Install DLLs.
#
install-mingwrt: install-mingwrt-dll
-install-bin install-dll: install-mingwrt-dll
+install-bin install-dll: install-mingwrt-dll
install-mingwrt-bin install-w32api-bin: install-%-bin: install-%-dll
install-mingwrt-dll install-w32api-dll: install-%-dll: bindir install-%-dll-files
install-%-dll-files:
- $(INSTALL_DATA) $^ ${bindir}
+ $(call INSTALL_DATA,$^,${bindir})
+ $(if $(STRIP_DLL),$(call STRIP_DLL,$^))
-# Install manpages.
-#
-install-man install-manpages: install-mingwrt-manpages
-format_manpage = sed "s/%PAGEREF%/`echo $1 | tr a-z A-Z` $2/"
+$(call optional_dll_version,libmingwex,@MAP_LIBMINGWEX_A_DLLVERSION@)
+optional_dll_version = $(shell echo '$2' | sed s,^[^:]*,install-$1-optional-dll,)
-vpath %.man ${mingwrt_srcdir}/man
-basename.$(man3ext) dirname.$(man3ext): %.$(man3ext): dirname.man
- $(call format_manpage,$*,$(man3ext)) $< > $@
+install-optional-dlls: install-mingwrt-optional-dlls
+install-mingwrt-optional-dlls: install-libmingwex-optional-dll
+install-%-optional-dll: %.dll.a bindir libdir
+ $(call INSTALL_DATA,$<,${libdir})
+ $(call INSTALL_DATA,$(call dllname,$*),${bindir})
+ $(if $(STRIP_DLL),$(call STRIP_DLL,$(call dllname,$*)))
+ $(if $(STRIP_DATA),$(call STRIP_DATA,$<))
-mingwrt-man$(man3ext): basename.$(man3ext) dirname.$(man3ext)
+# Install manpages.
+#
+vpath %.man ${mingwrt_srcdir}/man
+install-man install-manpages: install-mingwrt-manpages
+mingwrt-man$(man3ext): $(addsuffix .$(man3ext),basename dirname getline getdelim)
install-mingwrt-manpages: mandir mingwrt-man3
+
mingwrt-man%:
- $(mkinstalldirs) ${man$*dir}
- $(INSTALL_DATA) $^ ${man$*dir}
+ $(call mkinstalldirs,,${man$*dir})
+ $(call INSTALL_DATA,$^,${man$*dir})
$(RM) $^
+%: %.man
+ $(call format_manpage,$(basename $*),$(suffix $*),$<) $< > $@
+
+format_manpage = sed \
+ -e "s/%PAGEREF%/`echo $1 | tr a-z A-Z` $(2:.%=%) `date -r $3 +%d-%b-%Y`/"
+
+basename.$(man3ext): export reference_manpage = dirname.$(man3ext).man
+basename.$(man3ext): %: %.mancopy-recursive
+
+getdelim.$(man3ext): export reference_manpage = getline.$(man3ext).man
+getdelim.$(man3ext): %: %.mancopy-recursive
+
+%.mancopy-recursive:
+ $(MAKE) --no-print-directory $*.mancopy
+
+%.mancopy: $(reference_manpage)
+ $(call format_manpage,$(basename $*),$(suffix $*),$<) $< > $*
+
+
+# Undo Installation
+# -----------------
+#
+uninstall: uninstall-mingwrt
+uninstall-bin uninstall-dll uninstall-mingwrt: uninstall-mingwrt-dll
+uninstall-optional-dlls uninstall-mingwrt: uninstall-mingwrt-optional-dlls
+uninstall-mingwrt: uninstall-mingwrt-headers uninstall-mingwrt-libdir-libs
+uninstall-mingwrt: uninstall-mingwrt-libdir-objects
+
+REMOVE_HEADERS = cd $1 && $(RM) $(notdir $(wildcard $2))
+
+uninstall-mingwrt-headers:
+ $(call REMOVE_HEADERS,${includedir},${mingwrt_srcdir}/include/*.h)
+ for dir in $(mingwrt_include_subdirs); do \
+ files=`cd ${mingwrt_srcdir}/include/$$dir && echo *.h`; \
+ (cd ${includedir}/$$dir && $(RM) $$files); \
+ done
+ $(call REMOVE_HEADERS,${includedir},${mingwrt_srcdir}/profile/*.h)
+
+uninstall-mingwrt-dll uninstall-mingwrt-optional-dlls \
+uninstall-mingwrt-libdir-objects uninstall-mingwrt-libdir-libs: un%:
+ $(MAKE) --no-print-directory mkinstalldirs= \
+ INSTALL_DATA='cd $$2 && $(RM) $$1' $*
+
+
+# Test Suite
+# ----------
+#
+.PHONY: check-recursive
+check test tests: check-recursive
+check-recursive:
+ $(MAKE) -C tests $@
+
# Distribution
# ------------
#
.PHONY: dist
-dist: devdist dlldist licdist mandist srcdist
+dist: devdist dlldist licdist mandist optdist srcdist
$(RM) -r dist/mingwrt dist/w32api
mingwrt-dist-staged w32api-dist-staged: %-dist-staged:
$(RM) -r dist/$*
- $(MAKE) --no-print-directory prefix=`pwd`/dist/$* install-$*
+ $(MAKE) --no-print-directory prefix=`pwd`/dist/$* install-strip-$*
devdist: mingwrt-devdist
mingwrt_devdist_objects = dist/mingwrt/lib/*.$(OBJEXT)
mingwrt-devdist w32api-devdist: %-devdist: %-dist-staged
- $(STRIP) -g $($*_devdist_objects) dist/$*/lib/*.a
cd dist/$* && tar chf - --hard-dereference include lib | \
xz -c > ../$*-$(PACKAGE_RELEASE_TAG)-dev.tar.xz
dlldist: mingwrt-dlldist
mingwrt-dlldist: %-dlldist: %-dist-staged
- $(STRIP) dist/$*/bin/*.dll
cd dist/$* && tar chf - --hard-dereference bin | \
xz -c > ../$*-$(PACKAGE_RELEASE_TAG)-dll.tar.xz
xz -c > ../dist/$*-$(PACKAGE_RELEASE_TAG)-man.tar.xz
$(RM) -r tmp
+optdist: mingwrt-optdist
+mingwrt-optdist: mingwrt-libmingwex-optdist
+
+$(call optional_dll_package,libmingwex,@MAP_LIBMINGWEX_A_DLLVERSION@)
+optional_dll_package = $(shell echo '$2' | sed s,^[^:]*,mingwrt-$1-optdist)
+
+mingwrt-%-optdist:
+ $(RM) -r tmp
+ $(MAKE) --no-print-directory prefix=`pwd`/tmp install-$*-optional-dll
+ cd tmp && tar chf - --hard-dereference bin | \
+ xz -c > ../dist/$*-$(PACKAGE_RELEASE_TAG)-dll-$(dllsuffix).tar.xz
+ cd tmp && tar chf - --hard-dereference lib | \
+ xz -c > ../dist/$*-$(PACKAGE_RELEASE_TAG)-dev.tar.xz
+ $(RM) -r tmp
+
srcdist: mingwrt-srcdist
mingwrt-srcdist: mingwrt-srcdist-dir mingwrt-srcdist-files
cd dist && tar chf - $(PACKAGE_TARNAME)-$(PACKAGE_VERSION) | \
mingwrt-srcdist-dir:
$(RM) -r dist/$(PACKAGE_TARNAME)-$(PACKAGE_VERSION)
- $(mkinstalldirs) dist/$(PACKAGE_TARNAME)-$(PACKAGE_VERSION)
+ $(call mkinstalldirs,,dist/$(PACKAGE_TARNAME)-$(PACKAGE_VERSION))
-mingwrt-srcdist-files:
+mingwrt-srcdist-files: mingwrt-srcdist-config-files
+mingwrt-srcdist-files: mingwrt-srcdist-testsuite-files
+mingwrt-srcdist-files: mingwrt-srcdist-package-files
+
+vpath install-sh ${top_srcdir}/.. ${top_srcdir}
+mingwrt-srcdist-config-files: aclocal.m4 VERSION.m4 install-sh
+ cp -p $^ dist/$(PACKAGE_TARNAME)-$(PACKAGE_VERSION)
+
+mingwrt-srcdist-package-files:
(cd ${mingwrt_srcdir} && tar chf - --hard-dereference $(notdir $^)) | \
(cd dist/$(PACKAGE_TARNAME)-$(PACKAGE_VERSION) && tar xf -)
-mingwrt-srcdist-files: $(wildcard ${mingwrt_srcdir}/*.[chs]) \
+mingwrt-srcdist-package-files: $(wildcard ${mingwrt_srcdir}/*.[chs]) \
$(addprefix ${mingwrt_srcdir}/,ChangeLog CONTRIBUTORS DISCLAIMER README) \
$(wildcard ${mingwrt_srcdir}/*.def.in) $(wildcard ${mingwrt_srcdir}/config*) \
- $(addprefix ${mingwrt_srcdir}/,aclocal.m4 install-sh Makefile.in TODO) \
- $(addprefix ${mingwrt_srcdir}/,include man mingwex profile) \
- $(addprefix ${mingwrt_srcdir}/,crtdll.def) \
+ $(addprefix ${mingwrt_srcdir}/,include man mingwex msvcrt-xref profile) \
+ $(addprefix ${mingwrt_srcdir}/,TODO Makefile.in crtdll.def) \
$(wildcard ${mingwrt_srcdir}/*.txt)
+mingwrt-srcdist-testsuite-files: $(wildcard ${mingwrt_srcdir}/tests/*.at)
+mingwrt-srcdist-testsuite-files: $(wildcard ${mingwrt_srcdir}/tests/*.in)
+ (cd ${mingwrt_srcdir} && tar chf - $(addprefix tests/,$(notdir $^))) | \
+ (cd dist/$(PACKAGE_TARNAME)-$(PACKAGE_VERSION) && tar xf -)
+
install-html install-pdf: install-%: %dir mingwrt-man$(man3ext)
$(MAKE) --no-print-directory install-$*-files