#
# @vm-clock-sec: VM clock relative to boot in seconds
#
-# @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec
+# @vm-clock-nsec: fractional part in nano seconds to be used with
+# vm-clock-sec
#
-# @icount: Current instruction count. Appears when execution record/replay
-# is enabled. Used for "time-traveling" to match the moment
-# in the recorded execution with the snapshots. This counter may
-# be obtained through @query-replay command (since 5.2)
+# @icount: Current instruction count. Appears when execution
+# record/replay is enabled. Used for "time-traveling" to match
+# the moment in the recorded execution with the snapshots. This
+# counter may be obtained through @query-replay command (since
+# 5.2)
#
# Since: 1.3
-#
##
{ 'struct': 'SnapshotInfo',
'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int',
#
# @compat: compatibility level
#
-# @data-file: the filename of the external data file that is stored in the
-# image and used as a default for opening the image (since: 4.0)
+# @data-file: the filename of the external data file that is stored in
+# the image and used as a default for opening the image
+# (since: 4.0)
#
# @data-file-raw: True if the external data file must stay valid as a
-# standalone (read-only) raw image without looking at qcow2
-# metadata (since: 4.0)
+# standalone (read-only) raw image without looking at qcow2
+# metadata (since: 4.0)
#
-# @extended-l2: true if the image has extended L2 entries; only valid for
-# compat >= 1.1 (since 5.2)
+# @extended-l2: true if the image has extended L2 entries; only valid
+# for compat >= 1.1 (since 5.2)
#
# @lazy-refcounts: on or off; only valid for compat >= 1.1
#
# @corrupt: true if the image has been marked corrupt; only valid for
-# compat >= 1.1 (since 2.2)
+# compat >= 1.1 (since 2.2)
#
# @refcount-bits: width of a refcount entry in bits (since 2.3)
#
-# @encrypt: details about encryption parameters; only set if image
-# is encrypted (since 2.10)
+# @encrypt: details about encryption parameters; only set if image is
+# encrypted (since 2.10)
#
# @bitmaps: A list of qcow2 bitmap details (since 4.0)
#
# @ImageInfoSpecificKind:
#
# @luks: Since 2.7
+#
# @rbd: Since 6.1
+#
# @file: Since 8.0
#
# Since: 1.7
##
# @ImageInfoSpecific:
#
-# A discriminated record of image format specific information structures.
+# A discriminated record of image format specific information
+# structures.
#
# Since: 1.7
##
# @snapshots: list of VM snapshots
#
# @format-specific: structure supplying additional format-specific
-# information (since 1.7)
+# information (since 1.7)
#
# Since: 8.0
##
##
# @ImageInfo:
#
-# Information about a QEMU image file, and potentially its backing image
+# Information about a QEMU image file, and potentially its backing
+# image
#
# @backing-image: info of the backing image
#
##
# @BlockChildInfo:
#
-# Information about all nodes in the block graph starting at some node,
-# annotated with information about that node in relation to its parent.
+# Information about all nodes in the block graph starting at some
+# node, annotated with information about that node in relation to its
+# parent.
#
-# @name: Child name of the root node in the BlockGraphInfo struct, in its role
-# as the child of some undescribed parent node
+# @name: Child name of the root node in the BlockGraphInfo struct, in
+# its role as the child of some undescribed parent node
#
# @info: Block graph information starting at this node
#
##
# @BlockGraphInfo:
#
-# Information about all nodes in a block (sub)graph in the form of BlockNodeInfo
-# data.
-# The base BlockNodeInfo struct contains the information for the (sub)graph's
-# root node.
+# Information about all nodes in a block (sub)graph in the form of
+# BlockNodeInfo data. The base BlockNodeInfo struct contains the
+# information for the (sub)graph's root node.
#
# @children: Array of links to this node's child nodes' information
#
# @check-errors: number of unexpected errors occurred during check
#
# @image-end-offset: offset (in bytes) where the image ends, this
-# field is present if the driver for the image format
-# supports it
+# field is present if the driver for the image format supports it
#
# @corruptions: number of corruptions found during the check if any
#
# @leaks: number of leaks found during the check if any
#
-# @corruptions-fixed: number of corruptions fixed during the check
-# if any
+# @corruptions-fixed: number of corruptions fixed during the check if
+# any
#
# @leaks-fixed: number of leaks fixed during the check if any
#
-# @total-clusters: total number of clusters, this field is present
-# if the driver for the image format supports it
+# @total-clusters: total number of clusters, this field is present if
+# the driver for the image format supports it
#
-# @allocated-clusters: total number of allocated clusters, this
-# field is present if the driver for the image format
-# supports it
+# @allocated-clusters: total number of allocated clusters, this field
+# is present if the driver for the image format supports it
#
# @fragmented-clusters: total number of fragmented clusters, this
-# field is present if the driver for the image format
-# supports it
+# field is present if the driver for the image format supports it
#
# @compressed-clusters: total number of compressed clusters, this
-# field is present if the driver for the image format
-# supports it
+# field is present if the driver for the image format supports it
#
# Since: 1.4
##
# Mapping information from a virtual block range to a host file range
#
# @start: virtual (guest) offset of the first byte described by this
-# entry
+# entry
#
# @length: the number of bytes of the mapped virtual range
#
# @data: reading the image will actually read data from a file (in
-# particular, if @offset is present this means that the sectors
-# are not simply preallocated, but contain actual data in raw
-# format)
+# particular, if @offset is present this means that the sectors
+# are not simply preallocated, but contain actual data in raw
+# format)
#
# @zero: whether the virtual blocks read as zeroes
#
+# @compressed: true if the data is stored compressed (since 8.2)
+#
# @depth: number of layers (0 = top image, 1 = top image's backing
-# file, ..., n - 1 = bottom image (where n is the number of
-# images in the chain)) before reaching one for which the
-# range is allocated
+# file, ..., n - 1 = bottom image (where n is the number of images
+# in the chain)) before reaching one for which the range is
+# allocated
#
-# @present: true if this layer provides the data, false if adding a backing
-# layer could impact this region (since 6.1)
+# @present: true if this layer provides the data, false if adding a
+# backing layer could impact this region (since 6.1)
#
# @offset: if present, the image file stores the data for this range
-# in raw format at the given (host) offset
+# in raw format at the given (host) offset
#
# @filename: filename that is referred to by @offset
#
##
{ 'struct': 'MapEntry',
'data': {'start': 'int', 'length': 'int', 'data': 'bool',
- 'zero': 'bool', 'depth': 'int', 'present': 'bool',
- '*offset': 'int', '*filename': 'str' } }
+ 'zero': 'bool', 'compressed': 'bool', 'depth': 'int',
+ 'present': 'bool', '*offset': 'int', '*filename': 'str' } }
##
# @BlockdevCacheInfo:
# Cache mode information for a block device
#
# @writeback: true if writeback mode is enabled
+#
# @direct: true if the host page cache is bypassed (O_DIRECT)
+#
# @no-flush: true if flush requests are ignored for the device
#
# Since: 2.3
#
# @ro: true if the backing device was open read-only
#
-# @drv: the name of the block format used to open the backing device. As of
-# 0.14 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg',
-# 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
-# 'http', 'https', 'luks', 'nbd', 'parallels', 'qcow',
-# 'qcow2', 'raw', 'vdi', 'vmdk', 'vpc', 'vvfat'
-# 2.2: 'archipelago' added, 'cow' dropped
-# 2.3: 'host_floppy' deprecated
-# 2.5: 'host_floppy' dropped
-# 2.6: 'luks' added
-# 2.8: 'replication' added, 'tftp' dropped
-# 2.9: 'archipelago' dropped
+# @drv: the name of the block format used to open the backing device.
+# As of 0.14 this can be: 'blkdebug', 'bochs', 'cloop', 'cow',
+# 'dmg', 'file', 'file', 'ftp', 'ftps', 'host_cdrom',
+# 'host_device', 'http', 'https', 'luks', 'nbd', 'parallels',
+# 'qcow', 'qcow2', 'raw', 'vdi', 'vmdk', 'vpc', 'vvfat' 2.2:
+# 'archipelago' added, 'cow' dropped 2.3: 'host_floppy' deprecated
+# 2.5: 'host_floppy' dropped 2.6: 'luks' added 2.8: 'replication'
+# added, 'tftp' dropped 2.9: 'archipelago' dropped
#
# @backing_file: the name of the backing file (for copy-on-write)
#
-# @backing_file_depth: number of files in the backing file chain (since: 1.2)
+# @backing_file_depth: number of files in the backing file chain
+# (since: 1.2)
#
# @encrypted: true if the backing device is encrypted
#
#
# @image: the info of image used (since: 1.6)
#
-# @bps_max: total throughput limit during bursts,
-# in bytes (Since 1.7)
+# @bps_max: total throughput limit during bursts, in bytes (Since 1.7)
#
-# @bps_rd_max: read throughput limit during bursts,
-# in bytes (Since 1.7)
+# @bps_rd_max: read throughput limit during bursts, in bytes (Since
+# 1.7)
#
-# @bps_wr_max: write throughput limit during bursts,
-# in bytes (Since 1.7)
+# @bps_wr_max: write throughput limit during bursts, in bytes (Since
+# 1.7)
#
-# @iops_max: total I/O operations per second during bursts,
-# in bytes (Since 1.7)
+# @iops_max: total I/O operations per second during bursts, in bytes
+# (Since 1.7)
#
-# @iops_rd_max: read I/O operations per second during bursts,
-# in bytes (Since 1.7)
+# @iops_rd_max: read I/O operations per second during bursts, in bytes
+# (Since 1.7)
#
-# @iops_wr_max: write I/O operations per second during bursts,
-# in bytes (Since 1.7)
+# @iops_wr_max: write I/O operations per second during bursts, in
+# bytes (Since 1.7)
#
-# @bps_max_length: maximum length of the @bps_max burst
-# period, in seconds. (Since 2.6)
+# @bps_max_length: maximum length of the @bps_max burst period, in
+# seconds. (Since 2.6)
#
-# @bps_rd_max_length: maximum length of the @bps_rd_max
-# burst period, in seconds. (Since 2.6)
+# @bps_rd_max_length: maximum length of the @bps_rd_max burst period,
+# in seconds. (Since 2.6)
#
-# @bps_wr_max_length: maximum length of the @bps_wr_max
-# burst period, in seconds. (Since 2.6)
+# @bps_wr_max_length: maximum length of the @bps_wr_max burst period,
+# in seconds. (Since 2.6)
#
-# @iops_max_length: maximum length of the @iops burst
-# period, in seconds. (Since 2.6)
+# @iops_max_length: maximum length of the @iops burst period, in
+# seconds. (Since 2.6)
#
-# @iops_rd_max_length: maximum length of the @iops_rd_max
-# burst period, in seconds. (Since 2.6)
+# @iops_rd_max_length: maximum length of the @iops_rd_max burst
+# period, in seconds. (Since 2.6)
#
-# @iops_wr_max_length: maximum length of the @iops_wr_max
-# burst period, in seconds. (Since 2.6)
+# @iops_wr_max_length: maximum length of the @iops_wr_max burst
+# period, in seconds. (Since 2.6)
#
# @iops_size: an I/O size in bytes (Since 1.7)
#
#
# @cache: the cache mode used for the block device (since: 2.3)
#
-# @write_threshold: configured write threshold for the device.
-# 0 if disabled. (Since 2.3)
+# @write_threshold: configured write threshold for the device. 0 if
+# disabled. (Since 2.3)
#
-# @dirty-bitmaps: dirty bitmaps information (only present if node
-# has one or more dirty bitmaps) (Since 4.2)
+# @dirty-bitmaps: dirty bitmaps information (only present if node has
+# one or more dirty bitmaps) (Since 4.2)
#
# Since: 0.14
##
#
# @failed: The last I/O operation has failed
#
-# @nospace: The last I/O operation has failed due to a no-space condition
+# @nospace: The last I/O operation has failed due to a no-space
+# condition
#
# Since: 1.0
##
#
# @granularity: granularity of the dirty bitmap in bytes (since 1.4)
#
-# @recording: true if the bitmap is recording new writes from the guest.
-# Replaces ``active`` and ``disabled`` statuses. (since 4.0)
+# @recording: true if the bitmap is recording new writes from the
+# guest. (since 4.0)
#
# @busy: true if the bitmap is in-use by some operation (NBD or jobs)
-# and cannot be modified via QMP or used by another operation.
-# Replaces ``locked`` and ``frozen`` statuses. (since 4.0)
+# and cannot be modified via QMP or used by another operation.
+# (since 4.0)
#
-# @persistent: true if the bitmap was stored on disk, is scheduled to be stored
-# on disk, or both. (since 4.0)
+# @persistent: true if the bitmap was stored on disk, is scheduled to
+# be stored on disk, or both. (since 4.0)
#
-# @inconsistent: true if this is a persistent bitmap that was improperly
-# stored. Implies @persistent to be true; @recording and
-# @busy to be false. This bitmap cannot be used. To remove
-# it, use @block-dirty-bitmap-remove. (Since 4.0)
+# @inconsistent: true if this is a persistent bitmap that was
+# improperly stored. Implies @persistent to be true; @recording
+# and @busy to be false. This bitmap cannot be used. To remove
+# it, use @block-dirty-bitmap-remove. (Since 4.0)
#
# Since: 1.3
##
#
# An enumeration of flags that a bitmap can report to the user.
#
-# @in-use: This flag is set by any process actively modifying the qcow2 file,
-# and cleared when the updated bitmap is flushed to the qcow2 image.
-# The presence of this flag in an offline image means that the bitmap
-# was not saved correctly after its last usage, and may contain
-# inconsistent data.
+# @in-use: This flag is set by any process actively modifying the
+# qcow2 file, and cleared when the updated bitmap is flushed to
+# the qcow2 image. The presence of this flag in an offline image
+# means that the bitmap was not saved correctly after its last
+# usage, and may contain inconsistent data.
#
-# @auto: The bitmap must reflect all changes of the virtual disk by any
-# application that would write to this qcow2 file.
+# @auto: The bitmap must reflect all changes of the virtual disk by
+# any application that would write to this qcow2 file.
#
# Since: 4.0
##
#
# Block latency histogram.
#
-# @boundaries: list of interval boundary values in nanoseconds, all greater
-# than zero and in ascending order.
-# For example, the list [10, 50, 100] produces the following
-# histogram intervals: [0, 10), [10, 50), [50, 100), [100, +inf).
+# @boundaries: list of interval boundary values in nanoseconds, all
+# greater than zero and in ascending order. For example, the list
+# [10, 50, 100] produces the following histogram intervals: [0,
+# 10), [10, 50), [50, 100), [100, +inf).
#
-# @bins: list of io request counts corresponding to histogram intervals.
-# len(@bins) = len(@boundaries) + 1
-# For the example above, @bins may be something like [3, 1, 5, 2],
-# and corresponding histogram looks like:
+# @bins: list of io request counts corresponding to histogram
+# intervals, one more element than @boundaries has. For the
+# example above, @bins may be something like [3, 1, 5, 2], and
+# corresponding histogram looks like:
#
# ::
#
##
# @BlockInfo:
#
-# Block device information. This structure describes a virtual device and
-# the backing device associated with it.
+# Block device information. This structure describes a virtual device
+# and the backing device associated with it.
#
# @device: The device name associated with the virtual device.
#
-# @qdev: The qdev ID, or if no ID is assigned, the QOM path of the block
-# device. (since 2.10)
+# @qdev: The qdev ID, or if no ID is assigned, the QOM path of the
+# block device. (since 2.10)
#
-# @type: This field is returned only for compatibility reasons, it should
-# not be used (always returns 'unknown')
+# @type: This field is returned only for compatibility reasons, it
+# should not be used (always returns 'unknown')
#
# @removable: True if the device supports removable media.
#
-# @locked: True if the guest has locked this device from having its media
-# removed
+# @locked: True if the guest has locked this device from having its
+# media removed
#
-# @tray_open: True if the device's tray is open
-# (only present if it has a tray)
+# @tray_open: True if the device's tray is open (only present if it
+# has a tray)
#
-# @io-status: @BlockDeviceIoStatus. Only present if the device
-# supports it and the VM is configured to stop on errors
-# (supported device models: virtio-blk, IDE, SCSI except
-# scsi-generic)
+# @io-status: @BlockDeviceIoStatus. Only present if the device
+# supports it and the VM is configured to stop on errors
+# (supported device models: virtio-blk, IDE, SCSI except
+# scsi-generic)
#
# @inserted: @BlockDeviceInfo describing the device if media is
-# present
+# present
#
# Since: 0.14
##
##
# @BlockMeasureInfo:
#
-# Image file size calculation information. This structure describes the size
-# requirements for creating a new image file.
+# Image file size calculation information. This structure describes
+# the size requirements for creating a new image file.
#
-# The size requirements depend on the new image file format. File size always
-# equals virtual disk size for the 'raw' format, even for sparse POSIX files.
-# Compact formats such as 'qcow2' represent unallocated and zero regions
-# efficiently so file size may be smaller than virtual disk size.
+# The size requirements depend on the new image file format. File
+# size always equals virtual disk size for the 'raw' format, even for
+# sparse POSIX files. Compact formats such as 'qcow2' represent
+# unallocated and zero regions efficiently so file size may be smaller
+# than virtual disk size.
#
-# The values are upper bounds that are guaranteed to fit the new image file.
-# Subsequent modification, such as internal snapshot or further bitmap
-# creation, may require additional space and is not covered here.
+# The values are upper bounds that are guaranteed to fit the new image
+# file. Subsequent modification, such as internal snapshot or further
+# bitmap creation, may require additional space and is not covered
+# here.
#
-# @required: Size required for a new image file, in bytes, when copying just
-# allocated guest-visible contents.
+# @required: Size required for a new image file, in bytes, when
+# copying just allocated guest-visible contents.
#
-# @fully-allocated: Image file size, in bytes, once data has been written
-# to all sectors, when copying just guest-visible contents.
+# @fully-allocated: Image file size, in bytes, once data has been
+# written to all sectors, when copying just guest-visible
+# contents.
#
-# @bitmaps: Additional size required if all the top-level bitmap metadata
-# in the source image were to be copied to the destination,
-# present only when source and destination both support
-# persistent bitmaps. (since 5.1)
+# @bitmaps: Additional size required if all the top-level bitmap
+# metadata in the source image were to be copied to the
+# destination, present only when source and destination both
+# support persistent bitmaps. (since 5.1)
#
# Since: 2.10
##
#
# Get a list of BlockInfo for all virtual block devices.
#
-# Returns: a list of @BlockInfo describing each virtual block device. Filter
-# nodes that were created implicitly are skipped over.
+# Returns: a list of @BlockInfo describing each virtual block device.
+# Filter nodes that were created implicitly are skipped over.
#
# Since: 0.14
#
# }
# ]
# }
-#
##
{ 'command': 'query-block', 'returns': ['BlockInfo'],
'allow-preconfig': true }
#
# Statistics of a block device during a given interval of time.
#
-# @interval_length: Interval used for calculating the statistics,
-# in seconds.
+# @interval_length: Interval used for calculating the statistics, in
+# seconds.
#
# @min_rd_latency_ns: Minimum latency of read operations in the
-# defined interval, in nanoseconds.
+# defined interval, in nanoseconds.
#
# @min_wr_latency_ns: Minimum latency of write operations in the
-# defined interval, in nanoseconds.
+# defined interval, in nanoseconds.
+#
+# @min_zone_append_latency_ns: Minimum latency of zone append
+# operations in the defined interval, in nanoseconds (since 8.1)
#
# @min_flush_latency_ns: Minimum latency of flush operations in the
-# defined interval, in nanoseconds.
+# defined interval, in nanoseconds.
#
# @max_rd_latency_ns: Maximum latency of read operations in the
-# defined interval, in nanoseconds.
+# defined interval, in nanoseconds.
#
# @max_wr_latency_ns: Maximum latency of write operations in the
-# defined interval, in nanoseconds.
+# defined interval, in nanoseconds.
+#
+# @max_zone_append_latency_ns: Maximum latency of zone append
+# operations in the defined interval, in nanoseconds (since 8.1)
#
# @max_flush_latency_ns: Maximum latency of flush operations in the
-# defined interval, in nanoseconds.
+# defined interval, in nanoseconds.
#
# @avg_rd_latency_ns: Average latency of read operations in the
-# defined interval, in nanoseconds.
+# defined interval, in nanoseconds.
#
# @avg_wr_latency_ns: Average latency of write operations in the
-# defined interval, in nanoseconds.
+# defined interval, in nanoseconds.
+#
+# @avg_zone_append_latency_ns: Average latency of zone append
+# operations in the defined interval, in nanoseconds (since 8.1)
#
# @avg_flush_latency_ns: Average latency of flush operations in the
-# defined interval, in nanoseconds.
+# defined interval, in nanoseconds.
+#
+# @avg_rd_queue_depth: Average number of pending read operations in
+# the defined interval.
#
-# @avg_rd_queue_depth: Average number of pending read operations
-# in the defined interval.
+# @avg_wr_queue_depth: Average number of pending write operations in
+# the defined interval.
#
-# @avg_wr_queue_depth: Average number of pending write operations
-# in the defined interval.
+# @avg_zone_append_queue_depth: Average number of pending zone append
+# operations in the defined interval (since 8.1).
#
# Since: 2.5
##
'data': { 'interval_length': 'int', 'min_rd_latency_ns': 'int',
'max_rd_latency_ns': 'int', 'avg_rd_latency_ns': 'int',
'min_wr_latency_ns': 'int', 'max_wr_latency_ns': 'int',
- 'avg_wr_latency_ns': 'int', 'min_flush_latency_ns': 'int',
- 'max_flush_latency_ns': 'int', 'avg_flush_latency_ns': 'int',
- 'avg_rd_queue_depth': 'number', 'avg_wr_queue_depth': 'number' } }
+ 'avg_wr_latency_ns': 'int', 'min_zone_append_latency_ns': 'int',
+ 'max_zone_append_latency_ns': 'int',
+ 'avg_zone_append_latency_ns': 'int',
+ 'min_flush_latency_ns': 'int', 'max_flush_latency_ns': 'int',
+ 'avg_flush_latency_ns': 'int', 'avg_rd_queue_depth': 'number',
+ 'avg_wr_queue_depth': 'number',
+ 'avg_zone_append_queue_depth': 'number' } }
##
# @BlockDeviceStats:
#
# @wr_bytes: The number of bytes written by the device.
#
+# @zone_append_bytes: The number of bytes appended by the zoned
+# devices (since 8.1)
+#
# @unmap_bytes: The number of bytes unmapped by the device (Since 4.2)
#
-# @rd_operations: The number of read operations performed by the device.
+# @rd_operations: The number of read operations performed by the
+# device.
+#
+# @wr_operations: The number of write operations performed by the
+# device.
#
-# @wr_operations: The number of write operations performed by the device.
+# @zone_append_operations: The number of zone append operations
+# performed by the zoned devices (since 8.1)
#
-# @flush_operations: The number of cache flush operations performed by the
-# device (since 0.15)
+# @flush_operations: The number of cache flush operations performed by
+# the device (since 0.15)
#
-# @unmap_operations: The number of unmap operations performed by the device
-# (Since 4.2)
+# @unmap_operations: The number of unmap operations performed by the
+# device (Since 4.2)
#
-# @rd_total_time_ns: Total time spent on reads in nanoseconds (since 0.15).
+# @rd_total_time_ns: Total time spent on reads in nanoseconds (since
+# 0.15).
#
-# @wr_total_time_ns: Total time spent on writes in nanoseconds (since 0.15).
+# @wr_total_time_ns: Total time spent on writes in nanoseconds (since
+# 0.15).
#
-# @flush_total_time_ns: Total time spent on cache flushes in nanoseconds
-# (since 0.15).
+# @zone_append_total_time_ns: Total time spent on zone append writes
+# in nanoseconds (since 8.1)
#
-# @unmap_total_time_ns: Total time spent on unmap operations in nanoseconds
-# (Since 4.2)
+# @flush_total_time_ns: Total time spent on cache flushes in
+# nanoseconds (since 0.15).
#
-# @wr_highest_offset: The offset after the greatest byte written to the
-# device. The intended use of this information is for
-# growable sparse files (like qcow2) that are used on top
-# of a physical device.
+# @unmap_total_time_ns: Total time spent on unmap operations in
+# nanoseconds (Since 4.2)
#
-# @rd_merged: Number of read requests that have been merged into another
-# request (Since 2.3).
+# @wr_highest_offset: The offset after the greatest byte written to
+# the device. The intended use of this information is for
+# growable sparse files (like qcow2) that are used on top of a
+# physical device.
#
-# @wr_merged: Number of write requests that have been merged into another
-# request (Since 2.3).
+# @rd_merged: Number of read requests that have been merged into
+# another request (Since 2.3).
#
-# @unmap_merged: Number of unmap requests that have been merged into another
-# request (Since 4.2)
+# @wr_merged: Number of write requests that have been merged into
+# another request (Since 2.3).
#
-# @idle_time_ns: Time since the last I/O operation, in
-# nanoseconds. If the field is absent it means that
-# there haven't been any operations yet (Since 2.5).
+# @zone_append_merged: Number of zone append requests that have been
+# merged into another request (since 8.1)
+#
+# @unmap_merged: Number of unmap requests that have been merged into
+# another request (Since 4.2)
+#
+# @idle_time_ns: Time since the last I/O operation, in nanoseconds.
+# If the field is absent it means that there haven't been any
+# operations yet (Since 2.5).
#
# @failed_rd_operations: The number of failed read operations
-# performed by the device (Since 2.5)
+# performed by the device (Since 2.5)
#
# @failed_wr_operations: The number of failed write operations
-# performed by the device (Since 2.5)
+# performed by the device (Since 2.5)
+#
+# @failed_zone_append_operations: The number of failed zone append
+# write operations performed by the zoned devices (since 8.1)
#
# @failed_flush_operations: The number of failed flush operations
-# performed by the device (Since 2.5)
+# performed by the device (Since 2.5)
#
-# @failed_unmap_operations: The number of failed unmap operations performed
-# by the device (Since 4.2)
+# @failed_unmap_operations: The number of failed unmap operations
+# performed by the device (Since 4.2)
#
# @invalid_rd_operations: The number of invalid read operations
-# performed by the device (Since 2.5)
+# performed by the device (Since 2.5)
#
# @invalid_wr_operations: The number of invalid write operations
-# performed by the device (Since 2.5)
+# performed by the device (Since 2.5)
+#
+# @invalid_zone_append_operations: The number of invalid zone append
+# operations performed by the zoned device (since 8.1)
#
# @invalid_flush_operations: The number of invalid flush operations
-# performed by the device (Since 2.5)
+# performed by the device (Since 2.5)
#
-# @invalid_unmap_operations: The number of invalid unmap operations performed
-# by the device (Since 4.2)
+# @invalid_unmap_operations: The number of invalid unmap operations
+# performed by the device (Since 4.2)
#
# @account_invalid: Whether invalid operations are included in the
-# last access statistics (Since 2.5)
+# last access statistics (Since 2.5)
#
# @account_failed: Whether failed operations are included in the
-# latency and last access statistics (Since 2.5)
+# latency and last access statistics (Since 2.5)
#
# @timed_stats: Statistics specific to the set of previously defined
-# intervals of time (Since 2.5)
+# intervals of time (Since 2.5)
#
-# @rd_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0)
+# @rd_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0)
#
-# @wr_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0)
+# @wr_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0)
#
-# @flush_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0)
+# @zone_append_latency_histogram: @BlockLatencyHistogramInfo.
+# (since 8.1)
+#
+# @flush_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0)
#
# Since: 0.14
##
{ 'struct': 'BlockDeviceStats',
- 'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'unmap_bytes' : 'int',
- 'rd_operations': 'int', 'wr_operations': 'int',
+ 'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'zone_append_bytes': 'int',
+ 'unmap_bytes' : 'int', 'rd_operations': 'int',
+ 'wr_operations': 'int', 'zone_append_operations': 'int',
'flush_operations': 'int', 'unmap_operations': 'int',
'rd_total_time_ns': 'int', 'wr_total_time_ns': 'int',
- 'flush_total_time_ns': 'int', 'unmap_total_time_ns': 'int',
- 'wr_highest_offset': 'int',
- 'rd_merged': 'int', 'wr_merged': 'int', 'unmap_merged': 'int',
- '*idle_time_ns': 'int',
+ 'zone_append_total_time_ns': 'int', 'flush_total_time_ns': 'int',
+ 'unmap_total_time_ns': 'int', 'wr_highest_offset': 'int',
+ 'rd_merged': 'int', 'wr_merged': 'int', 'zone_append_merged': 'int',
+ 'unmap_merged': 'int', '*idle_time_ns': 'int',
'failed_rd_operations': 'int', 'failed_wr_operations': 'int',
- 'failed_flush_operations': 'int', 'failed_unmap_operations': 'int',
- 'invalid_rd_operations': 'int', 'invalid_wr_operations': 'int',
+ 'failed_zone_append_operations': 'int',
+ 'failed_flush_operations': 'int',
+ 'failed_unmap_operations': 'int', 'invalid_rd_operations': 'int',
+ 'invalid_wr_operations': 'int',
+ 'invalid_zone_append_operations': 'int',
'invalid_flush_operations': 'int', 'invalid_unmap_operations': 'int',
'account_invalid': 'bool', 'account_failed': 'bool',
'timed_stats': ['BlockDeviceTimedStats'],
'*rd_latency_histogram': 'BlockLatencyHistogramInfo',
'*wr_latency_histogram': 'BlockLatencyHistogramInfo',
+ '*zone_append_latency_histogram': 'BlockLatencyHistogramInfo',
'*flush_latency_histogram': 'BlockLatencyHistogramInfo' } }
##
#
# File driver statistics
#
-# @discard-nb-ok: The number of successful discard operations performed by
-# the driver.
+# @discard-nb-ok: The number of successful discard operations
+# performed by the driver.
#
-# @discard-nb-failed: The number of failed discard operations performed by
-# the driver.
+# @discard-nb-failed: The number of failed discard operations
+# performed by the driver.
#
# @discard-bytes-ok: The number of bytes discarded by the driver.
#
#
# @completion-errors: The number of completion errors.
#
-# @aligned-accesses: The number of aligned accesses performed by
-# the driver.
+# @aligned-accesses: The number of aligned accesses performed by the
+# driver.
#
# @unaligned-accesses: The number of unaligned accesses performed by
-# the driver.
+# the driver.
#
# Since: 5.2
##
# Statistics of a virtual block device or a block backing device.
#
# @device: If the stats are for a virtual block device, the name
-# corresponding to the virtual block device.
+# corresponding to the virtual block device.
#
-# @node-name: The node name of the device. (Since 2.3)
+# @node-name: The node name of the device. (Since 2.3)
#
-# @qdev: The qdev ID, or if no ID is assigned, the QOM path of the block
-# device. (since 3.0)
+# @qdev: The qdev ID, or if no ID is assigned, the QOM path of the
+# block device. (since 3.0)
#
# @stats: A @BlockDeviceStats for the device.
#
-# @driver-specific: Optional driver-specific stats. (Since 4.2)
+# @driver-specific: Optional driver-specific stats. (Since 4.2)
#
# @parent: This describes the file block device if it has one.
-# Contains recursively the statistics of the underlying
-# protocol (e.g. the host file for a qcow2 image). If there is
-# no underlying protocol, this field is omitted
+# Contains recursively the statistics of the underlying protocol
+# (e.g. the host file for a qcow2 image). If there is no
+# underlying protocol, this field is omitted
#
# @backing: This describes the backing block device if it has one.
-# (Since 2.0)
+# (Since 2.0)
#
# Since: 0.14
##
# Query the @BlockStats for all virtual block devices.
#
# @query-nodes: If true, the command will query all the block nodes
-# that have a node name, in a list which will include "parent"
-# information, but not "backing".
-# If false or omitted, the behavior is as before - query all the
-# device backends, recursively including their "parent" and
-# "backing". Filter nodes that were created implicitly are
-# skipped over in this mode. (Since 2.3)
+# that have a node name, in a list which will include "parent"
+# information, but not "backing". If false or omitted, the
+# behavior is as before - query all the device backends,
+# recursively including their "parent" and "backing". Filter nodes
+# that were created implicitly are skipped over in this mode.
+# (Since 2.3)
#
# Returns: A list of @BlockStats for each virtual block devices.
#
# }
# ]
# }
-#
##
{ 'command': 'query-blockstats',
'data': { '*query-nodes': 'bool' },
# @BlockdevOnError:
#
# An enumeration of possible behaviors for errors on I/O operations.
-# The exact meaning depends on whether the I/O was initiated by a guest
-# or by a block job
+# The exact meaning depends on whether the I/O was initiated by a
+# guest or by a block job
#
-# @report: for guest operations, report the error to the guest;
-# for jobs, cancel the job
+# @report: for guest operations, report the error to the guest; for
+# jobs, cancel the job
#
# @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR
-# or BLOCK_JOB_ERROR). The backup, mirror and commit block jobs retry
-# the failing request later and may still complete successfully. The
-# stream block job continues to stream and will complete with an
-# error.
+# or BLOCK_JOB_ERROR). The backup, mirror and commit block jobs
+# retry the failing request later and may still complete
+# successfully. The stream block job continues to stream and will
+# complete with an error.
#
# @enospc: same as @stop on ENOSPC, same as @report otherwise.
#
-# @stop: for guest operations, stop the virtual machine;
-# for jobs, pause the job
+# @stop: for guest operations, stop the virtual machine; for jobs,
+# pause the job
#
# @auto: inherit the error handling policy of the backend (since: 2.7)
#
#
# @none: only copy data written from now on
#
-# @incremental: only copy data described by the dirty bitmap. (since: 2.4)
+# @incremental: only copy data described by the dirty bitmap.
+# (since: 2.4)
#
-# @bitmap: only copy data described by the dirty bitmap. (since: 4.2)
-# Behavior on completion is determined by the BitmapSyncMode.
+# @bitmap: only copy data described by the dirty bitmap. (since: 4.2)
+# Behavior on completion is determined by the BitmapSyncMode.
#
# Since: 1.3
##
##
# @BitmapSyncMode:
#
-# An enumeration of possible behaviors for the synchronization of a bitmap
-# when used for data copy operations.
+# An enumeration of possible behaviors for the synchronization of a
+# bitmap when used for data copy operations.
#
-# @on-success: The bitmap is only synced when the operation is successful.
-# This is the behavior always used for 'INCREMENTAL' backups.
+# @on-success: The bitmap is only synced when the operation is
+# successful. This is the behavior always used for 'INCREMENTAL'
+# backups.
#
# @never: The bitmap is never synchronized with the operation, and is
-# treated solely as a read-only manifest of blocks to copy.
+# treated solely as a read-only manifest of blocks to copy.
#
# @always: The bitmap is always synchronized with the operation,
-# regardless of whether or not the operation was successful.
+# regardless of whether or not the operation was successful.
#
# Since: 4.2
##
# @background: copy data in background only.
#
# @write-blocking: when data is written to the source, write it
-# (synchronously) to the target as well. In
-# addition, data is copied in background just like in
-# @background mode.
+# (synchronously) to the target as well. In addition, data is
+# copied in background just like in @background mode.
#
# Since: 3.0
##
'data': ['background', 'write-blocking'] }
##
+# @BlockJobInfoMirror:
+#
+# Information specific to mirror block jobs.
+#
+# @actively-synced: Whether the source is actively synced to the
+# target, i.e. same data and new writes are done synchronously to
+# both.
+#
+# Since 8.2
+##
+{ 'struct': 'BlockJobInfoMirror',
+ 'data': { 'actively-synced': 'bool' } }
+
+##
# @BlockJobInfo:
#
# Information about a long-running block device operation.
#
# @type: the job type ('stream' for image streaming)
#
-# @device: The job identifier. Originally the device name but other
-# values are allowed since QEMU 2.7
+# @device: The job identifier. Originally the device name but other
+# values are allowed since QEMU 2.7
#
-# @len: Estimated @offset value at the completion of the job. This value can
-# arbitrarily change while the job is running, in both directions.
+# @len: Estimated @offset value at the completion of the job. This
+# value can arbitrarily change while the job is running, in both
+# directions.
#
-# @offset: Progress made until now. The unit is arbitrary and the value can
-# only meaningfully be used for the ratio of @offset to @len. The
-# value is monotonically increasing.
+# @offset: Progress made until now. The unit is arbitrary and the
+# value can only meaningfully be used for the ratio of @offset to
+# @len. The value is monotonically increasing.
#
-# @busy: false if the job is known to be in a quiescent state, with
-# no pending I/O. Since 1.3.
+# @busy: false if the job is known to be in a quiescent state, with no
+# pending I/O. (Since 1.3)
#
-# @paused: whether the job is paused or, if @busy is true, will
-# pause itself as soon as possible. Since 1.3.
+# @paused: whether the job is paused or, if @busy is true, will pause
+# itself as soon as possible. (Since 1.3)
#
# @speed: the rate limit, bytes per second
#
#
# @status: Current job state/status (since 2.12)
#
-# @auto-finalize: Job will finalize itself when PENDING, moving to
-# the CONCLUDED state. (since 2.12)
+# @auto-finalize: Job will finalize itself when PENDING, moving to the
+# CONCLUDED state. (since 2.12)
#
-# @auto-dismiss: Job will dismiss itself when CONCLUDED, moving to the NULL
-# state and disappearing from the query list. (since 2.12)
+# @auto-dismiss: Job will dismiss itself when CONCLUDED, moving to the
+# NULL state and disappearing from the query list. (since 2.12)
#
# @error: Error information if the job did not complete successfully.
-# Not set if the job completed successfully. (since 2.12.1)
+# Not set if the job completed successfully. (since 2.12.1)
#
# Since: 1.1
##
-{ 'struct': 'BlockJobInfo',
- 'data': {'type': 'str', 'device': 'str', 'len': 'int',
+{ 'union': 'BlockJobInfo',
+ 'base': {'type': 'JobType', 'device': 'str', 'len': 'int',
'offset': 'int', 'busy': 'bool', 'paused': 'bool', 'speed': 'int',
'io-status': 'BlockDeviceIoStatus', 'ready': 'bool',
'status': 'JobStatus',
'auto-finalize': 'bool', 'auto-dismiss': 'bool',
- '*error': 'str' } }
+ '*error': 'str' },
+ 'discriminator': 'type',
+ 'data': { 'mirror': 'BlockJobInfoMirror' } }
##
# @query-block-jobs:
#
# @size: new image size in bytes
#
-# Returns: - nothing on success
-# - If @device is not a valid block device, DeviceNotFound
+# Returns:
+# - nothing on success
+# - If @device is not a valid block device, DeviceNotFound
#
# Since: 0.14
#
# -> { "execute": "block_resize",
# "arguments": { "device": "scratch", "size": 1073741824 } }
# <- { "return": {} }
-#
##
{ 'command': 'block_resize',
'data': { '*device': 'str',
##
# @NewImageMode:
#
-# An enumeration that tells QEMU how to set the backing file path in
-# a new image file.
+# An enumeration that tells QEMU how to set the backing file path in a
+# new image file.
#
# @existing: QEMU should look for an existing image file.
#
# @absolute-paths: QEMU should create a new image with absolute paths
-# for the backing file. If there is no backing file available, the new
-# image will not be backed either.
+# for the backing file. If there is no backing file available,
+# the new image will not be backed either.
#
# Since: 1.1
##
#
# @device: the name of the device to take a snapshot of.
#
-# @node-name: graph node name to generate the snapshot from (Since 2.0)
+# @node-name: graph node name to generate the snapshot from (Since
+# 2.0)
#
-# @snapshot-file: the target of the new overlay image. If the file
-# exists, or if it is a device, the overlay will be created in the
-# existing file/device. Otherwise, a new file will be created.
+# @snapshot-file: the target of the new overlay image. If the file
+# exists, or if it is a device, the overlay will be created in the
+# existing file/device. Otherwise, a new file will be created.
#
-# @snapshot-node-name: the graph node name of the new image (Since 2.0)
+# @snapshot-node-name: the graph node name of the new image (Since
+# 2.0)
#
# @format: the format of the overlay image, default is 'qcow2'.
#
# @mode: whether and how QEMU should create a new image, default is
-# 'absolute-paths'.
+# 'absolute-paths'.
##
{ 'struct': 'BlockdevSnapshotSync',
'data': { '*device': 'str', '*node-name': 'str',
# @node: device or node name that will have a snapshot taken.
#
# @overlay: reference to the existing block device that will become
-# the overlay of @node, as part of taking the snapshot.
-# It must not have a current backing file (this can be
-# achieved by passing "backing": null to blockdev-add).
+# the overlay of @node, as part of taking the snapshot. It must
+# not have a current backing file (this can be achieved by passing
+# "backing": null to blockdev-add).
#
# Since: 2.5
##
##
# @BackupPerf:
#
-# Optional parameters for backup. These parameters don't affect
+# Optional parameters for backup. These parameters don't affect
# functionality, but may significantly affect performance.
#
-# @use-copy-range: Use copy offloading. Default false.
+# @use-copy-range: Use copy offloading. Default false.
#
-# @max-workers: Maximum number of parallel requests for the sustained background
-# copying process. Doesn't influence copy-before-write operations.
-# Default 64.
+# @max-workers: Maximum number of parallel requests for the sustained
+# background copying process. Doesn't influence copy-before-write
+# operations. Default 64.
#
-# @max-chunk: Maximum request length for the sustained background copying
-# process. Doesn't influence copy-before-write operations.
-# 0 means unlimited. If max-chunk is non-zero then it should not be
-# less than job cluster size which is calculated as maximum of
-# target image cluster size and 64k. Default 0.
+# @max-chunk: Maximum request length for the sustained background
+# copying process. Doesn't influence copy-before-write
+# operations. 0 means unlimited. If max-chunk is non-zero then
+# it should not be less than job cluster size which is calculated
+# as maximum of target image cluster size and 64k. Default 0.
#
# Since: 6.0
##
##
# @BackupCommon:
#
-# @job-id: identifier for the newly-created block job. If
-# omitted, the device name will be used. (Since 2.7)
+# @job-id: identifier for the newly-created block job. If omitted,
+# the device name will be used. (Since 2.7)
#
-# @device: the device name or node-name of a root node which should be copied.
+# @device: the device name or node-name of a root node which should be
+# copied.
#
-# @sync: what parts of the disk image should be copied to the destination
-# (all the disk, only the sectors allocated in the topmost image, from a
-# dirty bitmap, or only new I/O).
+# @sync: what parts of the disk image should be copied to the
+# destination (all the disk, only the sectors allocated in the
+# topmost image, from a dirty bitmap, or only new I/O).
#
-# @speed: the maximum speed, in bytes per second. The default is 0,
-# for unlimited.
+# @speed: the maximum speed, in bytes per second. The default is 0,
+# for unlimited.
#
-# @bitmap: The name of a dirty bitmap to use.
-# Must be present if sync is "bitmap" or "incremental".
-# Can be present if sync is "full" or "top".
-# Must not be present otherwise.
-# (Since 2.4 (drive-backup), 3.1 (blockdev-backup))
+# @bitmap: The name of a dirty bitmap to use. Must be present if sync
+# is "bitmap" or "incremental". Can be present if sync is "full"
+# or "top". Must not be present otherwise.
+# (Since 2.4 (drive-backup), 3.1 (blockdev-backup))
#
-# @bitmap-mode: Specifies the type of data the bitmap should contain after
-# the operation concludes.
-# Must be present if a bitmap was provided,
-# Must NOT be present otherwise. (Since 4.2)
+# @bitmap-mode: Specifies the type of data the bitmap should contain
+# after the operation concludes. Must be present if a bitmap was
+# provided, Must NOT be present otherwise. (Since 4.2)
#
# @compress: true to compress data, if the target format supports it.
-# (default: false) (since 2.8)
+# (default: false) (since 2.8)
#
# @on-source-error: the action to take on an error on the source,
-# default 'report'. 'stop' and 'enospc' can only be used
-# if the block device supports io-status (see BlockInfo).
+# default 'report'. 'stop' and 'enospc' can only be used if the
+# block device supports io-status (see BlockInfo).
#
# @on-target-error: the action to take on an error on the target,
-# default 'report' (no limitations, since this applies to
-# a different block device than @device).
-#
-# @auto-finalize: When false, this job will wait in a PENDING state after it has
-# finished its work, waiting for @block-job-finalize before
-# making any block graph changes.
-# When true, this job will automatically
-# perform its abort or commit actions.
-# Defaults to true. (Since 2.12)
-#
-# @auto-dismiss: When false, this job will wait in a CONCLUDED state after it
-# has completely ceased all work, and awaits @block-job-dismiss.
-# When true, this job will automatically disappear from the query
-# list without user intervention.
-# Defaults to true. (Since 2.12)
+# default 'report' (no limitations, since this applies to a
+# different block device than @device).
+#
+# @auto-finalize: When false, this job will wait in a PENDING state
+# after it has finished its work, waiting for @block-job-finalize
+# before making any block graph changes. When true, this job will
+# automatically perform its abort or commit actions. Defaults to
+# true. (Since 2.12)
+#
+# @auto-dismiss: When false, this job will wait in a CONCLUDED state
+# after it has completely ceased all work, and awaits
+# @block-job-dismiss. When true, this job will automatically
+# disappear from the query list without user intervention.
+# Defaults to true. (Since 2.12)
#
# @filter-node-name: the node name that should be assigned to the
-# filter driver that the backup job inserts into the graph
-# above node specified by @drive. If this option is not given,
-# a node name is autogenerated. (Since: 4.2)
+# filter driver that the backup job inserts into the graph above
+# node specified by @drive. If this option is not given, a node
+# name is autogenerated. (Since: 4.2)
#
-# @x-perf: Performance options. (Since 6.0)
+# @x-perf: Performance options. (Since 6.0)
#
# Features:
+#
# @unstable: Member @x-perf is experimental.
#
# Note: @on-source-error and @on-target-error only affect background
-# I/O. If an error occurs during a guest write request, the device's
-# rerror/werror actions will be used.
+# I/O. If an error occurs during a guest write request, the
+# device's rerror/werror actions will be used.
#
# Since: 4.2
##
##
# @DriveBackup:
#
-# @target: the target of the new image. If the file exists, or if it
-# is a device, the existing file/device will be used as the new
-# destination. If it does not exist, a new file will be created.
+# @target: the target of the new image. If the file exists, or if it
+# is a device, the existing file/device will be used as the new
+# destination. If it does not exist, a new file will be created.
#
-# @format: the format of the new destination, default is to
-# probe if @mode is 'existing', else the format of the source
+# @format: the format of the new destination, default is to probe if
+# @mode is 'existing', else the format of the source
#
# @mode: whether and how QEMU should create a new image, default is
-# 'absolute-paths'.
+# 'absolute-paths'.
#
# Since: 1.6
##
#
# For the arguments, see the documentation of BlockdevSnapshotSync.
#
-# Returns: - nothing on success
-# - If @device is not a valid block device, DeviceNotFound
+# Returns:
+# - nothing on success
+# - If @device is not a valid block device, DeviceNotFound
#
# Since: 0.14
#
# "/some/place/my-image",
# "format": "qcow2" } }
# <- { "return": {} }
-#
##
{ 'command': 'blockdev-snapshot-sync',
'data': 'BlockdevSnapshotSync',
#
# Take a snapshot, by installing 'node' as the backing image of
# 'overlay'. Additionally, if 'node' is associated with a block
-# device, the block device changes to using 'overlay' as its new active
-# image.
+# device, the block device changes to using 'overlay' as its new
+# active image.
#
# For the arguments, see the documentation of BlockdevSnapshot.
#
# Features:
-# @allow-write-only-overlay: If present, the check whether this operation is safe
-# was relaxed so that it can be used to change
-# backing file of a destination of a blockdev-mirror.
-# (since 5.0)
+#
+# @allow-write-only-overlay: If present, the check whether this
+# operation is safe was relaxed so that it can be used to change
+# backing file of a destination of a blockdev-mirror. (since 5.0)
#
# Since: 2.5
#
# "arguments": { "node": "ide-hd0",
# "overlay": "node1534" } }
# <- { "return": {} }
-#
##
{ 'command': 'blockdev-snapshot',
'data': 'BlockdevSnapshot',
#
# Change the backing file in the image file metadata. This does not
# cause QEMU to reopen the image file to reparse the backing filename
-# (it may, however, perform a reopen to change permissions from
-# r/o -> r/w -> r/o, if needed). The new backing file string is written
-# into the image file metadata, and the QEMU internal strings are
-# updated.
+# (it may, however, perform a reopen to change permissions from r/o ->
+# r/w -> r/o, if needed). The new backing file string is written into
+# the image file metadata, and the QEMU internal strings are updated.
#
# @image-node-name: The name of the block driver state node of the
-# image to modify. The "device" argument is used
-# to verify "image-node-name" is in the chain
-# described by "device".
+# image to modify. The "device" argument is used to verify
+# "image-node-name" is in the chain described by "device".
#
# @device: The device name or node-name of the root node that owns
-# image-node-name.
+# image-node-name.
#
-# @backing-file: The string to write as the backing file. This
-# string is not validated, so care should be taken
-# when specifying the string or the image chain may
-# not be able to be reopened again.
+# @backing-file: The string to write as the backing file. This string
+# is not validated, so care should be taken when specifying the
+# string or the image chain may not be able to be reopened again.
#
-# Returns: - Nothing on success
-# - If "device" does not exist or cannot be determined, DeviceNotFound
+# Returns:
+# - Nothing on success
+# - If "device" does not exist or cannot be determined,
+# DeviceNotFound
#
# Since: 2.1
##
##
# @block-commit:
#
-# Live commit of data from overlay image nodes into backing nodes - i.e.,
-# writes data between 'top' and 'base' into 'base'.
+# Live commit of data from overlay image nodes into backing nodes -
+# i.e., writes data between 'top' and 'base' into 'base'.
#
-# If top == base, that is an error.
-# If top has no overlays on top of it, or if it is in use by a writer,
-# the job will not be completed by itself. The user needs to complete
-# the job with the block-job-complete command after getting the ready
-# event. (Since 2.0)
+# If top == base, that is an error. If top has no overlays on top of
+# it, or if it is in use by a writer, the job will not be completed by
+# itself. The user needs to complete the job with the
+# block-job-complete command after getting the ready event. (Since
+# 2.0)
#
# If the base image is smaller than top, then the base image will be
# resized to be the same size as top. If top is smaller than the base
# size to match the size of the smaller top, you can safely truncate
# it yourself once the commit operation successfully completes.
#
-# @job-id: identifier for the newly-created block job. If
-# omitted, the device name will be used. (Since 2.7)
+# @job-id: identifier for the newly-created block job. If omitted,
+# the device name will be used. (Since 2.7)
#
# @device: the device name or node-name of a root node
#
# @base-node: The node name of the backing image to write data into.
-# If not specified, this is the deepest backing image.
-# (since: 3.1)
+# If not specified, this is the deepest backing image.
+# (since: 3.1)
#
-# @base: Same as @base-node, except that it is a file name rather than a node
-# name. This must be the exact filename string that was used to open the
-# node; other strings, even if addressing the same file, are not
-# accepted
+# @base: Same as @base-node, except that it is a file name rather than
+# a node name. This must be the exact filename string that was
+# used to open the node; other strings, even if addressing the
+# same file, are not accepted
#
# @top-node: The node name of the backing image within the image chain
-# which contains the topmost data to be committed down. If
-# not specified, this is the active layer. (since: 3.1)
+# which contains the topmost data to be committed down. If not
+# specified, this is the active layer. (since: 3.1)
#
-# @top: Same as @top-node, except that it is a file name rather than a node
-# name. This must be the exact filename string that was used to open the
-# node; other strings, even if addressing the same file, are not
-# accepted
+# @top: Same as @top-node, except that it is a file name rather than a
+# node name. This must be the exact filename string that was used
+# to open the node; other strings, even if addressing the same
+# file, are not accepted
#
# @backing-file: The backing file string to write into the overlay
-# image of 'top'. If 'top' does not have an overlay
-# image, or if 'top' is in use by a writer, specifying
-# a backing file string is an error.
-#
-# This filename is not validated. If a pathname string
-# is such that it cannot be resolved by QEMU, that
-# means that subsequent QMP or HMP commands must use
-# node-names for the image in question, as filename
-# lookup methods will fail.
-#
-# If not specified, QEMU will automatically determine
-# the backing file string to use, or error out if
-# there is no obvious choice. Care should be taken
-# when specifying the string, to specify a valid
-# filename or protocol.
-# (Since 2.1)
+# image of 'top'. If 'top' does not have an overlay image, or if
+# 'top' is in use by a writer, specifying a backing file string is
+# an error.
+#
+# This filename is not validated. If a pathname string is such
+# that it cannot be resolved by QEMU, that means that subsequent
+# QMP or HMP commands must use node-names for the image in
+# question, as filename lookup methods will fail.
+#
+# If not specified, QEMU will automatically determine the backing
+# file string to use, or error out if there is no obvious choice.
+# Care should be taken when specifying the string, to specify a
+# valid filename or protocol. (Since 2.1)
#
# @speed: the maximum speed, in bytes per second
#
-# @on-error: the action to take on an error. 'ignore' means that the request
-# should be retried. (default: report; Since: 5.0)
+# @on-error: the action to take on an error. 'ignore' means that the
+# request should be retried. (default: report; Since: 5.0)
#
# @filter-node-name: the node name that should be assigned to the
-# filter driver that the commit job inserts into the graph
-# above @top. If this option is not given, a node name is
-# autogenerated. (Since: 2.9)
-#
-# @auto-finalize: When false, this job will wait in a PENDING state after it has
-# finished its work, waiting for @block-job-finalize before
-# making any block graph changes.
-# When true, this job will automatically
-# perform its abort or commit actions.
-# Defaults to true. (Since 3.1)
-#
-# @auto-dismiss: When false, this job will wait in a CONCLUDED state after it
-# has completely ceased all work, and awaits @block-job-dismiss.
-# When true, this job will automatically disappear from the query
-# list without user intervention.
-# Defaults to true. (Since 3.1)
+# filter driver that the commit job inserts into the graph above
+# @top. If this option is not given, a node name is
+# autogenerated. (Since: 2.9)
+#
+# @auto-finalize: When false, this job will wait in a PENDING state
+# after it has finished its work, waiting for @block-job-finalize
+# before making any block graph changes. When true, this job will
+# automatically perform its abort or commit actions. Defaults to
+# true. (Since 3.1)
+#
+# @auto-dismiss: When false, this job will wait in a CONCLUDED state
+# after it has completely ceased all work, and awaits
+# @block-job-dismiss. When true, this job will automatically
+# disappear from the query list without user intervention.
+# Defaults to true. (Since 3.1)
#
# Features:
+#
# @deprecated: Members @base and @top are deprecated. Use @base-node
-# and @top-node instead.
+# and @top-node instead.
#
-# Returns: - Nothing on success
-# - If @device does not exist, DeviceNotFound
-# - Any other error returns a GenericError.
+# Returns:
+# - Nothing on success
+# - If @device does not exist, DeviceNotFound
+# - Any other error returns a GenericError.
#
# Since: 1.3
#
# "arguments": { "device": "virtio0",
# "top": "/tmp/snap1.qcow2" } }
# <- { "return": {} }
-#
##
{ 'command': 'block-commit',
'data': { '*job-id': 'str', 'device': 'str', '*base-node': 'str',
##
# @drive-backup:
#
-# Start a point-in-time copy of a block device to a new destination. The
-# status of ongoing drive-backup operations can be checked with
-# query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
-# The operation can be stopped before it has completed using the
-# block-job-cancel command.
+# Start a point-in-time copy of a block device to a new destination.
+# The status of ongoing drive-backup operations can be checked with
+# query-block-jobs where the BlockJobInfo.type field has the value
+# 'backup'. The operation can be stopped before it has completed using
+# the block-job-cancel command.
#
# Features:
-# @deprecated: This command is deprecated. Use @blockdev-backup instead.
#
-# Returns: - nothing on success
-# - If @device is not a valid block device, GenericError
+# @deprecated: This command is deprecated. Use @blockdev-backup
+# instead.
+#
+# Returns:
+# - nothing on success
+# - If @device is not a valid block device, GenericError
#
# Since: 1.6
#
# "sync": "full",
# "target": "backup.img" } }
# <- { "return": {} }
-#
##
{ 'command': 'drive-backup', 'boxed': true,
'data': 'DriveBackup', 'features': ['deprecated'],
##
# @blockdev-backup:
#
-# Start a point-in-time copy of a block device to a new destination. The
-# status of ongoing blockdev-backup operations can be checked with
-# query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
-# The operation can be stopped before it has completed using the
-# block-job-cancel command.
+# Start a point-in-time copy of a block device to a new destination.
+# The status of ongoing blockdev-backup operations can be checked with
+# query-block-jobs where the BlockJobInfo.type field has the value
+# 'backup'. The operation can be stopped before it has completed using
+# the block-job-cancel command.
#
-# Returns: - nothing on success
-# - If @device is not a valid block device, DeviceNotFound
+# Returns:
+# - nothing on success
+# - If @device is not a valid block device, DeviceNotFound
#
# Since: 2.3
#
# "sync": "full",
# "target": "tgt-id" } }
# <- { "return": {} }
-#
##
{ 'command': 'blockdev-backup', 'boxed': true,
'data': 'BlockdevBackup',
#
# Get the named block driver list
#
-# @flat: Omit the nested data about backing image ("backing-image" key) if true.
-# Default is false (Since 5.0)
+# @flat: Omit the nested data about backing image ("backing-image"
+# key) if true. Default is false (Since 5.0)
#
# Returns: the list of BlockDeviceInfo
#
# "virtual-size":2048000
# }
# } } ] }
-#
##
{ 'command': 'query-named-block-nodes',
'returns': [ 'BlockDeviceInfo' ],
##
# @XDbgBlockGraphNode:
#
-# @id: Block graph node identifier. This @id is generated only for
-# x-debug-query-block-graph and does not relate to any other identifiers in
-# Qemu.
+# @id: Block graph node identifier. This @id is generated only for
+# x-debug-query-block-graph and does not relate to any other
+# identifiers in Qemu.
#
-# @type: Type of graph node. Can be one of block-backend, block-job or
-# block-driver-state.
+# @type: Type of graph node. Can be one of block-backend, block-job
+# or block-driver-state.
#
-# @name: Human readable name of the node. Corresponds to node-name for
-# block-driver-state nodes; is not guaranteed to be unique in the whole
-# graph (with block-jobs and block-backends).
+# @name: Human readable name of the node. Corresponds to node-name
+# for block-driver-state nodes; is not guaranteed to be unique in
+# the whole graph (with block-jobs and block-backends).
#
# Since: 4.0
##
#
# Enum of base block permissions.
#
-# @consistent-read: A user that has the "permission" of consistent reads is
-# guaranteed that their view of the contents of the block
-# device is complete and self-consistent, representing the
-# contents of a disk at a specific point.
-# For most block devices (including their backing files) this
-# is true, but the property cannot be maintained in a few
-# situations like for intermediate nodes of a commit block
-# job.
+# @consistent-read: A user that has the "permission" of consistent
+# reads is guaranteed that their view of the contents of the block
+# device is complete and self-consistent, representing the
+# contents of a disk at a specific point. For most block devices
+# (including their backing files) this is true, but the property
+# cannot be maintained in a few situations like for intermediate
+# nodes of a commit block job.
#
-# @write: This permission is required to change the visible disk contents.
+# @write: This permission is required to change the visible disk
+# contents.
#
-# @write-unchanged: This permission (which is weaker than BLK_PERM_WRITE) is
-# both enough and required for writes to the block node when
-# the caller promises that the visible disk content doesn't
-# change.
-# As the BLK_PERM_WRITE permission is strictly stronger,
-# either is sufficient to perform an unchanging write.
+# @write-unchanged: This permission (which is weaker than
+# BLK_PERM_WRITE) is both enough and required for writes to the
+# block node when the caller promises that the visible disk
+# content doesn't change. As the BLK_PERM_WRITE permission is
+# strictly stronger, either is sufficient to perform an unchanging
+# write.
#
-# @resize: This permission is required to change the size of a block node.
+# @resize: This permission is required to change the size of a block
+# node.
#
# Since: 4.0
##
#
# @perm: granted permissions for the parent operating on the child
#
-# @shared-perm: permissions that can still be granted to other users of the
-# child while it is still attached to this parent
+# @shared-perm: permissions that can still be granted to other users
+# of the child while it is still attached to this parent
#
# Since: 4.0
##
# Get the block graph.
#
# Features:
+#
# @unstable: This command is meant for debugging.
#
# Since: 4.0
##
# @drive-mirror:
#
-# Start mirroring a block device's writes to a new destination. target
-# specifies the target of the new image. If the file exists, or if it
-# is a device, it will be used as the new destination for writes. If
-# it does not exist, a new file will be created. format specifies the
-# format of the mirror image, default is to probe if mode='existing',
-# else the format of the source.
+# Start mirroring a block device's writes to a new destination.
+# target specifies the target of the new image. If the file exists,
+# or if it is a device, it will be used as the new destination for
+# writes. If it does not exist, a new file will be created. format
+# specifies the format of the mirror image, default is to probe if
+# mode='existing', else the format of the source.
#
-# Returns: - nothing on success
-# - If @device is not a valid block device, GenericError
+# Returns:
+# - nothing on success
+# - If @device is not a valid block device, GenericError
#
# Since: 1.3
#
# "sync": "full",
# "format": "qcow2" } }
# <- { "return": {} }
-#
##
{ 'command': 'drive-mirror', 'boxed': true,
'data': 'DriveMirror',
#
# A set of parameters describing drive mirror setup.
#
-# @job-id: identifier for the newly-created block job. If
-# omitted, the device name will be used. (Since 2.7)
+# @job-id: identifier for the newly-created block job. If omitted,
+# the device name will be used. (Since 2.7)
#
-# @device: the device name or node-name of a root node whose writes should be
-# mirrored.
+# @device: the device name or node-name of a root node whose writes
+# should be mirrored.
#
-# @target: the target of the new image. If the file exists, or if it
-# is a device, the existing file/device will be used as the new
-# destination. If it does not exist, a new file will be created.
+# @target: the target of the new image. If the file exists, or if it
+# is a device, the existing file/device will be used as the new
+# destination. If it does not exist, a new file will be created.
#
-# @format: the format of the new destination, default is to
-# probe if @mode is 'existing', else the format of the source
+# @format: the format of the new destination, default is to probe if
+# @mode is 'existing', else the format of the source
#
-# @node-name: the new block driver state node name in the graph
-# (Since 2.1)
+# @node-name: the new block driver state node name in the graph (Since
+# 2.1)
#
# @replaces: with sync=full graph node name to be replaced by the new
-# image when a whole image copy is done. This can be used to repair
-# broken Quorum files. By default, @device is replaced, although
-# implicitly created filters on it are kept. (Since 2.1)
+# image when a whole image copy is done. This can be used to
+# repair broken Quorum files. By default, @device is replaced,
+# although implicitly created filters on it are kept. (Since 2.1)
#
# @mode: whether and how QEMU should create a new image, default is
-# 'absolute-paths'.
+# 'absolute-paths'.
#
# @speed: the maximum speed, in bytes per second
#
-# @sync: what parts of the disk image should be copied to the destination
-# (all the disk, only the sectors allocated in the topmost image, or
-# only new I/O).
+# @sync: what parts of the disk image should be copied to the
+# destination (all the disk, only the sectors allocated in the
+# topmost image, or only new I/O).
#
-# @granularity: granularity of the dirty bitmap, default is 64K
-# if the image format doesn't have clusters, 4K if the clusters
-# are smaller than that, else the cluster size. Must be a
-# power of 2 between 512 and 64M (since 1.4).
+# @granularity: granularity of the dirty bitmap, default is 64K if the
+# image format doesn't have clusters, 4K if the clusters are
+# smaller than that, else the cluster size. Must be a power of 2
+# between 512 and 64M (since 1.4).
#
-# @buf-size: maximum amount of data in flight from source to
-# target (since 1.4).
+# @buf-size: maximum amount of data in flight from source to target
+# (since 1.4).
#
# @on-source-error: the action to take on an error on the source,
-# default 'report'. 'stop' and 'enospc' can only be used
-# if the block device supports io-status (see BlockInfo).
+# default 'report'. 'stop' and 'enospc' can only be used if the
+# block device supports io-status (see BlockInfo).
#
# @on-target-error: the action to take on an error on the target,
-# default 'report' (no limitations, since this applies to
-# a different block device than @device).
-#
-# @unmap: Whether to try to unmap target sectors where source has
-# only zero. If true, and target unallocated sectors will read as zero,
-# target image sectors will be unmapped; otherwise, zeroes will be
-# written. Both will result in identical contents.
-# Default is true. (Since 2.4)
-#
-# @copy-mode: when to copy data to the destination; defaults to 'background'
-# (Since: 3.0)
-#
-# @auto-finalize: When false, this job will wait in a PENDING state after it has
-# finished its work, waiting for @block-job-finalize before
-# making any block graph changes.
-# When true, this job will automatically
-# perform its abort or commit actions.
-# Defaults to true. (Since 3.1)
-#
-# @auto-dismiss: When false, this job will wait in a CONCLUDED state after it
-# has completely ceased all work, and awaits @block-job-dismiss.
-# When true, this job will automatically disappear from the query
-# list without user intervention.
-# Defaults to true. (Since 3.1)
+# default 'report' (no limitations, since this applies to a
+# different block device than @device).
+#
+# @unmap: Whether to try to unmap target sectors where source has only
+# zero. If true, and target unallocated sectors will read as
+# zero, target image sectors will be unmapped; otherwise, zeroes
+# will be written. Both will result in identical contents.
+# Default is true. (Since 2.4)
+#
+# @copy-mode: when to copy data to the destination; defaults to
+# 'background' (Since: 3.0)
+#
+# @auto-finalize: When false, this job will wait in a PENDING state
+# after it has finished its work, waiting for @block-job-finalize
+# before making any block graph changes. When true, this job will
+# automatically perform its abort or commit actions. Defaults to
+# true. (Since 3.1)
+#
+# @auto-dismiss: When false, this job will wait in a CONCLUDED state
+# after it has completely ceased all work, and awaits
+# @block-job-dismiss. When true, this job will automatically
+# disappear from the query list without user intervention.
+# Defaults to true. (Since 3.1)
#
# Since: 1.3
##
# @name: name of the dirty bitmap (must be less than 1024 bytes)
#
# @granularity: the bitmap granularity, default is 64k for
-# block-dirty-bitmap-add
+# block-dirty-bitmap-add
#
# @persistent: the bitmap is persistent, i.e. it will be saved to the
-# corresponding block device image file on its close. For now only
-# Qcow2 disks support persistent bitmaps. Default is false for
-# block-dirty-bitmap-add. (Since: 2.10)
+# corresponding block device image file on its close. For now
+# only Qcow2 disks support persistent bitmaps. Default is false
+# for block-dirty-bitmap-add. (Since: 2.10)
#
-# @disabled: the bitmap is created in the disabled state, which means that
-# it will not track drive changes. The bitmap may be enabled with
-# block-dirty-bitmap-enable. Default is false. (Since: 4.0)
+# @disabled: the bitmap is created in the disabled state, which means
+# that it will not track drive changes. The bitmap may be enabled
+# with block-dirty-bitmap-enable. Default is false. (Since: 4.0)
#
# Since: 2.4
##
##
# @BlockDirtyBitmapOrStr:
#
-# @local: name of the bitmap, attached to the same node as target bitmap.
+# @local: name of the bitmap, attached to the same node as target
+# bitmap.
#
# @external: bitmap with specified node
#
#
# @target: name of the destination dirty bitmap
#
-# @bitmaps: name(s) of the source dirty bitmap(s) at @node and/or fully
-# specified BlockDirtyBitmap elements. The latter are supported
-# since 4.1.
+# @bitmaps: name(s) of the source dirty bitmap(s) at @node and/or
+# fully specified BlockDirtyBitmap elements. The latter are
+# supported since 4.1.
#
# Since: 4.0
##
##
# @block-dirty-bitmap-add:
#
-# Create a dirty bitmap with a name on the node, and start tracking the writes.
+# Create a dirty bitmap with a name on the node, and start tracking
+# the writes.
#
-# Returns: - nothing on success
-# - If @node is not a valid block device or node, DeviceNotFound
-# - If @name is already taken, GenericError with an explanation
+# Returns:
+# - nothing on success
+# - If @node is not a valid block device or node, DeviceNotFound
+# - If @name is already taken, GenericError with an explanation
#
# Since: 2.4
#
# -> { "execute": "block-dirty-bitmap-add",
# "arguments": { "node": "drive0", "name": "bitmap0" } }
# <- { "return": {} }
-#
##
{ 'command': 'block-dirty-bitmap-add',
'data': 'BlockDirtyBitmapAdd',
# @block-dirty-bitmap-remove:
#
# Stop write tracking and remove the dirty bitmap that was created
-# with block-dirty-bitmap-add. If the bitmap is persistent, remove it from its
-# storage too.
+# with block-dirty-bitmap-add. If the bitmap is persistent, remove it
+# from its storage too.
#
-# Returns: - nothing on success
-# - If @node is not a valid block device or node, DeviceNotFound
-# - If @name is not found, GenericError with an explanation
-# - if @name is frozen by an operation, GenericError
+# Returns:
+# - nothing on success
+# - If @node is not a valid block device or node, DeviceNotFound
+# - If @name is not found, GenericError with an explanation
+# - if @name is frozen by an operation, GenericError
#
# Since: 2.4
#
# -> { "execute": "block-dirty-bitmap-remove",
# "arguments": { "node": "drive0", "name": "bitmap0" } }
# <- { "return": {} }
-#
##
{ 'command': 'block-dirty-bitmap-remove',
'data': 'BlockDirtyBitmap',
# backup from this point in time forward will only backup clusters
# modified after this clear operation.
#
-# Returns: - nothing on success
-# - If @node is not a valid block device, DeviceNotFound
-# - If @name is not found, GenericError with an explanation
+# Returns:
+# - nothing on success
+# - If @node is not a valid block device, DeviceNotFound
+# - If @name is not found, GenericError with an explanation
#
# Since: 2.4
#
# -> { "execute": "block-dirty-bitmap-clear",
# "arguments": { "node": "drive0", "name": "bitmap0" } }
# <- { "return": {} }
-#
##
{ 'command': 'block-dirty-bitmap-clear',
'data': 'BlockDirtyBitmap',
#
# Enables a dirty bitmap so that it will begin tracking disk changes.
#
-# Returns: - nothing on success
-# - If @node is not a valid block device, DeviceNotFound
-# - If @name is not found, GenericError with an explanation
+# Returns:
+# - nothing on success
+# - If @node is not a valid block device, DeviceNotFound
+# - If @name is not found, GenericError with an explanation
#
# Since: 4.0
#
# -> { "execute": "block-dirty-bitmap-enable",
# "arguments": { "node": "drive0", "name": "bitmap0" } }
# <- { "return": {} }
-#
##
{ 'command': 'block-dirty-bitmap-enable',
'data': 'BlockDirtyBitmap',
#
# Disables a dirty bitmap so that it will stop tracking disk changes.
#
-# Returns: - nothing on success
-# - If @node is not a valid block device, DeviceNotFound
-# - If @name is not found, GenericError with an explanation
+# Returns:
+# - nothing on success
+# - If @node is not a valid block device, DeviceNotFound
+# - If @name is not found, GenericError with an explanation
#
# Since: 4.0
#
# -> { "execute": "block-dirty-bitmap-disable",
# "arguments": { "node": "drive0", "name": "bitmap0" } }
# <- { "return": {} }
-#
##
{ 'command': 'block-dirty-bitmap-disable',
'data': 'BlockDirtyBitmap',
# @block-dirty-bitmap-merge:
#
# Merge dirty bitmaps listed in @bitmaps to the @target dirty bitmap.
-# Dirty bitmaps in @bitmaps will be unchanged, except if it also appears
-# as the @target bitmap. Any bits already set in @target will still be
-# set after the merge, i.e., this operation does not clear the target.
-# On error, @target is unchanged.
-#
-# The resulting bitmap will count as dirty any clusters that were dirty in any
-# of the source bitmaps. This can be used to achieve backup checkpoints, or in
-# simpler usages, to copy bitmaps.
-#
-# Returns: - nothing on success
-# - If @node is not a valid block device, DeviceNotFound
-# - If any bitmap in @bitmaps or @target is not found, GenericError
-# - If any of the bitmaps have different sizes or granularities,
-# GenericError
+# Dirty bitmaps in @bitmaps will be unchanged, except if it also
+# appears as the @target bitmap. Any bits already set in @target will
+# still be set after the merge, i.e., this operation does not clear
+# the target. On error, @target is unchanged.
+#
+# The resulting bitmap will count as dirty any clusters that were
+# dirty in any of the source bitmaps. This can be used to achieve
+# backup checkpoints, or in simpler usages, to copy bitmaps.
+#
+# Returns:
+# - nothing on success
+# - If @node is not a valid block device, DeviceNotFound
+# - If any bitmap in @bitmaps or @target is not found,
+# GenericError
+# - If any of the bitmaps have different sizes or granularities,
+# GenericError
#
# Since: 4.0
#
# "arguments": { "node": "drive0", "target": "bitmap0",
# "bitmaps": ["bitmap1"] } }
# <- { "return": {} }
-#
##
{ 'command': 'block-dirty-bitmap-merge',
'data': 'BlockDirtyBitmapMerge',
# Get bitmap SHA256.
#
# Features:
+#
# @unstable: This command is meant for debugging.
#
-# Returns: - BlockDirtyBitmapSha256 on success
-# - If @node is not a valid block device, DeviceNotFound
-# - If @name is not found or if hashing has failed, GenericError with an
-# explanation
+# Returns:
+# - BlockDirtyBitmapSha256 on success
+# - If @node is not a valid block device, DeviceNotFound
+# - If @name is not found or if hashing has failed, GenericError
+# with an explanation
#
# Since: 2.10
##
#
# Start mirroring a block device's writes to a new destination.
#
-# @job-id: identifier for the newly-created block job. If
-# omitted, the device name will be used. (Since 2.7)
+# @job-id: identifier for the newly-created block job. If omitted,
+# the device name will be used. (Since 2.7)
#
-# @device: The device name or node-name of a root node whose writes should be
-# mirrored.
+# @device: The device name or node-name of a root node whose writes
+# should be mirrored.
#
-# @target: the id or node-name of the block device to mirror to. This mustn't be
-# attached to guest.
+# @target: the id or node-name of the block device to mirror to. This
+# mustn't be attached to guest.
#
# @replaces: with sync=full graph node name to be replaced by the new
-# image when a whole image copy is done. This can be used to repair
-# broken Quorum files. By default, @device is replaced, although
-# implicitly created filters on it are kept.
+# image when a whole image copy is done. This can be used to
+# repair broken Quorum files. By default, @device is replaced,
+# although implicitly created filters on it are kept.
#
# @speed: the maximum speed, in bytes per second
#
-# @sync: what parts of the disk image should be copied to the destination
-# (all the disk, only the sectors allocated in the topmost image, or
-# only new I/O).
+# @sync: what parts of the disk image should be copied to the
+# destination (all the disk, only the sectors allocated in the
+# topmost image, or only new I/O).
#
-# @granularity: granularity of the dirty bitmap, default is 64K
-# if the image format doesn't have clusters, 4K if the clusters
-# are smaller than that, else the cluster size. Must be a
-# power of 2 between 512 and 64M
+# @granularity: granularity of the dirty bitmap, default is 64K if the
+# image format doesn't have clusters, 4K if the clusters are
+# smaller than that, else the cluster size. Must be a power of 2
+# between 512 and 64M
#
-# @buf-size: maximum amount of data in flight from source to
-# target
+# @buf-size: maximum amount of data in flight from source to target
#
# @on-source-error: the action to take on an error on the source,
-# default 'report'. 'stop' and 'enospc' can only be used
-# if the block device supports io-status (see BlockInfo).
+# default 'report'. 'stop' and 'enospc' can only be used if the
+# block device supports io-status (see BlockInfo).
#
# @on-target-error: the action to take on an error on the target,
-# default 'report' (no limitations, since this applies to
-# a different block device than @device).
+# default 'report' (no limitations, since this applies to a
+# different block device than @device).
#
# @filter-node-name: the node name that should be assigned to the
-# filter driver that the mirror job inserts into the graph
-# above @device. If this option is not given, a node name is
-# autogenerated. (Since: 2.9)
-#
-# @copy-mode: when to copy data to the destination; defaults to 'background'
-# (Since: 3.0)
-#
-# @auto-finalize: When false, this job will wait in a PENDING state after it has
-# finished its work, waiting for @block-job-finalize before
-# making any block graph changes.
-# When true, this job will automatically
-# perform its abort or commit actions.
-# Defaults to true. (Since 3.1)
-#
-# @auto-dismiss: When false, this job will wait in a CONCLUDED state after it
-# has completely ceased all work, and awaits @block-job-dismiss.
-# When true, this job will automatically disappear from the query
-# list without user intervention.
-# Defaults to true. (Since 3.1)
+# filter driver that the mirror job inserts into the graph above
+# @device. If this option is not given, a node name is
+# autogenerated. (Since: 2.9)
+#
+# @copy-mode: when to copy data to the destination; defaults to
+# 'background' (Since: 3.0)
+#
+# @auto-finalize: When false, this job will wait in a PENDING state
+# after it has finished its work, waiting for @block-job-finalize
+# before making any block graph changes. When true, this job will
+# automatically perform its abort or commit actions. Defaults to
+# true. (Since 3.1)
+#
+# @auto-dismiss: When false, this job will wait in a CONCLUDED state
+# after it has completely ceased all work, and awaits
+# @block-job-dismiss. When true, this job will automatically
+# disappear from the query list without user intervention.
+# Defaults to true. (Since 3.1)
#
# Returns: nothing on success.
#
# "target": "target0",
# "sync": "full" } }
# <- { "return": {} }
-#
##
{ 'command': 'blockdev-mirror',
'data': { '*job-id': 'str', 'device': 'str', 'target': 'str',
#
# @iops_wr: write I/O operations per second
#
-# @bps_max: total throughput limit during bursts,
-# in bytes (Since 1.7)
+# @bps_max: total throughput limit during bursts, in bytes (Since 1.7)
#
-# @bps_rd_max: read throughput limit during bursts,
-# in bytes (Since 1.7)
+# @bps_rd_max: read throughput limit during bursts, in bytes (Since
+# 1.7)
#
-# @bps_wr_max: write throughput limit during bursts,
-# in bytes (Since 1.7)
+# @bps_wr_max: write throughput limit during bursts, in bytes (Since
+# 1.7)
#
-# @iops_max: total I/O operations per second during bursts,
-# in bytes (Since 1.7)
+# @iops_max: total I/O operations per second during bursts, in bytes
+# (Since 1.7)
#
-# @iops_rd_max: read I/O operations per second during bursts,
-# in bytes (Since 1.7)
+# @iops_rd_max: read I/O operations per second during bursts, in bytes
+# (Since 1.7)
#
-# @iops_wr_max: write I/O operations per second during bursts,
-# in bytes (Since 1.7)
+# @iops_wr_max: write I/O operations per second during bursts, in
+# bytes (Since 1.7)
#
-# @bps_max_length: maximum length of the @bps_max burst
-# period, in seconds. It must only
-# be set if @bps_max is set as well.
-# Defaults to 1. (Since 2.6)
+# @bps_max_length: maximum length of the @bps_max burst period, in
+# seconds. It must only be set if @bps_max is set as well.
+# Defaults to 1. (Since 2.6)
#
-# @bps_rd_max_length: maximum length of the @bps_rd_max
-# burst period, in seconds. It must only
-# be set if @bps_rd_max is set as well.
-# Defaults to 1. (Since 2.6)
+# @bps_rd_max_length: maximum length of the @bps_rd_max burst period,
+# in seconds. It must only be set if @bps_rd_max is set as well.
+# Defaults to 1. (Since 2.6)
#
-# @bps_wr_max_length: maximum length of the @bps_wr_max
-# burst period, in seconds. It must only
-# be set if @bps_wr_max is set as well.
-# Defaults to 1. (Since 2.6)
+# @bps_wr_max_length: maximum length of the @bps_wr_max burst period,
+# in seconds. It must only be set if @bps_wr_max is set as well.
+# Defaults to 1. (Since 2.6)
#
-# @iops_max_length: maximum length of the @iops burst
-# period, in seconds. It must only
-# be set if @iops_max is set as well.
-# Defaults to 1. (Since 2.6)
+# @iops_max_length: maximum length of the @iops burst period, in
+# seconds. It must only be set if @iops_max is set as well.
+# Defaults to 1. (Since 2.6)
#
-# @iops_rd_max_length: maximum length of the @iops_rd_max
-# burst period, in seconds. It must only
-# be set if @iops_rd_max is set as well.
-# Defaults to 1. (Since 2.6)
+# @iops_rd_max_length: maximum length of the @iops_rd_max burst
+# period, in seconds. It must only be set if @iops_rd_max is set
+# as well. Defaults to 1. (Since 2.6)
#
-# @iops_wr_max_length: maximum length of the @iops_wr_max
-# burst period, in seconds. It must only
-# be set if @iops_wr_max is set as well.
-# Defaults to 1. (Since 2.6)
+# @iops_wr_max_length: maximum length of the @iops_wr_max burst
+# period, in seconds. It must only be set if @iops_wr_max is set
+# as well. Defaults to 1. (Since 2.6)
#
# @iops_size: an I/O size in bytes (Since 1.7)
#
# @group: throttle group name (Since 2.4)
#
# Features:
+#
# @deprecated: Member @device is deprecated. Use @id instead.
#
# Since: 1.1
##
# @ThrottleLimits:
#
-# Limit parameters for throttling.
-# Since some limit combinations are illegal, limits should always be set in one
-# transaction. All fields are optional. When setting limits, if a field is
-# missing the current value is not changed.
+# Limit parameters for throttling. Since some limit combinations are
+# illegal, limits should always be set in one transaction. All fields
+# are optional. When setting limits, if a field is missing the
+# current value is not changed.
#
# @iops-total: limit total I/O operations per second
+#
# @iops-total-max: I/O operations burst
-# @iops-total-max-length: length of the iops-total-max burst period, in seconds
-# It must only be set if @iops-total-max is set as well.
+#
+# @iops-total-max-length: length of the iops-total-max burst period,
+# in seconds It must only be set if @iops-total-max is set as
+# well.
+#
# @iops-read: limit read operations per second
+#
# @iops-read-max: I/O operations read burst
-# @iops-read-max-length: length of the iops-read-max burst period, in seconds
-# It must only be set if @iops-read-max is set as well.
+#
+# @iops-read-max-length: length of the iops-read-max burst period, in
+# seconds It must only be set if @iops-read-max is set as well.
+#
# @iops-write: limit write operations per second
+#
# @iops-write-max: I/O operations write burst
-# @iops-write-max-length: length of the iops-write-max burst period, in seconds
-# It must only be set if @iops-write-max is set as well.
+#
+# @iops-write-max-length: length of the iops-write-max burst period,
+# in seconds It must only be set if @iops-write-max is set as
+# well.
+#
# @bps-total: limit total bytes per second
+#
# @bps-total-max: total bytes burst
-# @bps-total-max-length: length of the bps-total-max burst period, in seconds.
-# It must only be set if @bps-total-max is set as well.
+#
+# @bps-total-max-length: length of the bps-total-max burst period, in
+# seconds. It must only be set if @bps-total-max is set as well.
+#
# @bps-read: limit read bytes per second
+#
# @bps-read-max: total bytes read burst
-# @bps-read-max-length: length of the bps-read-max burst period, in seconds
-# It must only be set if @bps-read-max is set as well.
+#
+# @bps-read-max-length: length of the bps-read-max burst period, in
+# seconds It must only be set if @bps-read-max is set as well.
+#
# @bps-write: limit write bytes per second
+#
# @bps-write-max: total bytes write burst
-# @bps-write-max-length: length of the bps-write-max burst period, in seconds
-# It must only be set if @bps-write-max is set as well.
+#
+# @bps-write-max-length: length of the bps-write-max burst period, in
+# seconds It must only be set if @bps-write-max is set as well.
+#
# @iops-size: when limiting by iops max size of an I/O in bytes
#
# Since: 2.11
# @limits: limits to apply for this throttle group
#
# Features:
+#
# @unstable: All members starting with x- are aliases for the same key
-# without x- in the @limits object. This is not a stable
-# interface and may be removed or changed incompatibly in
-# the future. Use @limits for a supported stable
-# interface.
+# without x- in the @limits object. This is not a stable
+# interface and may be removed or changed incompatibly in the
+# future. Use @limits for a supported stable interface.
#
# Since: 2.11
##
#
# Copy data from a backing file into a block device.
#
-# The block streaming operation is performed in the background until the entire
-# backing file has been copied. This command returns immediately once streaming
-# has started. The status of ongoing block streaming operations can be checked
-# with query-block-jobs. The operation can be stopped before it has completed
-# using the block-job-cancel command.
-#
-# The node that receives the data is called the top image, can be located in
-# any part of the chain (but always above the base image; see below) and can be
-# specified using its device or node name. Earlier qemu versions only allowed
-# 'device' to name the top level node; presence of the 'base-node' parameter
-# during introspection can be used as a witness of the enhanced semantics
-# of 'device'.
-#
-# If a base file is specified then sectors are not copied from that base file and
-# its backing chain. This can be used to stream a subset of the backing file
-# chain instead of flattening the entire image.
-# When streaming completes the image file will have the base file as its backing
-# file, unless that node was changed while the job was running. In that case,
-# base's parent's backing (or filtered, whichever exists) child (i.e., base at
-# the beginning of the job) will be the new backing file.
-#
-# On successful completion the image file is updated to drop the backing file
-# and the BLOCK_JOB_COMPLETED event is emitted.
-#
-# In case @device is a filter node, block-stream modifies the first non-filter
-# overlay node below it to point to the new backing node instead of modifying
-# @device itself.
-#
-# @job-id: identifier for the newly-created block job. If
-# omitted, the device name will be used. (Since 2.7)
+# The block streaming operation is performed in the background until
+# the entire backing file has been copied. This command returns
+# immediately once streaming has started. The status of ongoing block
+# streaming operations can be checked with query-block-jobs. The
+# operation can be stopped before it has completed using the
+# block-job-cancel command.
+#
+# The node that receives the data is called the top image, can be
+# located in any part of the chain (but always above the base image;
+# see below) and can be specified using its device or node name.
+# Earlier qemu versions only allowed 'device' to name the top level
+# node; presence of the 'base-node' parameter during introspection can
+# be used as a witness of the enhanced semantics of 'device'.
+#
+# If a base file is specified then sectors are not copied from that
+# base file and its backing chain. This can be used to stream a
+# subset of the backing file chain instead of flattening the entire
+# image. When streaming completes the image file will have the base
+# file as its backing file, unless that node was changed while the job
+# was running. In that case, base's parent's backing (or filtered,
+# whichever exists) child (i.e., base at the beginning of the job)
+# will be the new backing file.
+#
+# On successful completion the image file is updated to drop the
+# backing file and the BLOCK_JOB_COMPLETED event is emitted.
+#
+# In case @device is a filter node, block-stream modifies the first
+# non-filter overlay node below it to point to the new backing node
+# instead of modifying @device itself.
+#
+# @job-id: identifier for the newly-created block job. If omitted,
+# the device name will be used. (Since 2.7)
#
# @device: the device or node name of the top image
#
-# @base: the common backing file name.
-# It cannot be set if @base-node or @bottom is also set.
+# @base: the common backing file name. It cannot be set if @base-node
+# or @bottom is also set.
#
-# @base-node: the node name of the backing file.
-# It cannot be set if @base or @bottom is also set. (Since 2.8)
+# @base-node: the node name of the backing file. It cannot be set if
+# @base or @bottom is also set. (Since 2.8)
#
# @bottom: the last node in the chain that should be streamed into
-# top. It cannot be set if @base or @base-node is also set.
-# It cannot be filter node. (Since 6.0)
+# top. It cannot be set if @base or @base-node is also set. It
+# cannot be filter node. (Since 6.0)
#
-# @backing-file: The backing file string to write into the top
-# image. This filename is not validated.
+# @backing-file: The backing file string to write into the top image.
+# This filename is not validated.
#
-# If a pathname string is such that it cannot be
-# resolved by QEMU, that means that subsequent QMP or
-# HMP commands must use node-names for the image in
-# question, as filename lookup methods will fail.
+# If a pathname string is such that it cannot be resolved by QEMU,
+# that means that subsequent QMP or HMP commands must use
+# node-names for the image in question, as filename lookup methods
+# will fail.
#
-# If not specified, QEMU will automatically determine
-# the backing file string to use, or error out if there
-# is no obvious choice. Care should be taken when
-# specifying the string, to specify a valid filename or
-# protocol.
-# (Since 2.1)
+# If not specified, QEMU will automatically determine the backing
+# file string to use, or error out if there is no obvious choice.
+# Care should be taken when specifying the string, to specify a
+# valid filename or protocol. (Since 2.1)
#
# @speed: the maximum speed, in bytes per second
#
-# @on-error: the action to take on an error (default report).
-# 'stop' and 'enospc' can only be used if the block device
-# supports io-status (see BlockInfo). Since 1.3.
+# @on-error: the action to take on an error (default report). 'stop'
+# and 'enospc' can only be used if the block device supports
+# io-status (see BlockInfo). (Since 1.3)
#
# @filter-node-name: the node name that should be assigned to the
-# filter driver that the stream job inserts into the graph
-# above @device. If this option is not given, a node name is
-# autogenerated. (Since: 6.0)
-#
-# @auto-finalize: When false, this job will wait in a PENDING state after it has
-# finished its work, waiting for @block-job-finalize before
-# making any block graph changes.
-# When true, this job will automatically
-# perform its abort or commit actions.
-# Defaults to true. (Since 3.1)
-#
-# @auto-dismiss: When false, this job will wait in a CONCLUDED state after it
-# has completely ceased all work, and awaits @block-job-dismiss.
-# When true, this job will automatically disappear from the query
-# list without user intervention.
-# Defaults to true. (Since 3.1)
-#
-# Returns: - Nothing on success.
-# - If @device does not exist, DeviceNotFound.
+# filter driver that the stream job inserts into the graph above
+# @device. If this option is not given, a node name is
+# autogenerated. (Since: 6.0)
+#
+# @auto-finalize: When false, this job will wait in a PENDING state
+# after it has finished its work, waiting for @block-job-finalize
+# before making any block graph changes. When true, this job will
+# automatically perform its abort or commit actions. Defaults to
+# true. (Since 3.1)
+#
+# @auto-dismiss: When false, this job will wait in a CONCLUDED state
+# after it has completely ceased all work, and awaits
+# @block-job-dismiss. When true, this job will automatically
+# disappear from the query list without user intervention.
+# Defaults to true. (Since 3.1)
+#
+# Returns:
+# - Nothing on success.
+# - If @device does not exist, DeviceNotFound.
#
# Since: 1.1
#
# "arguments": { "device": "virtio0",
# "base": "/tmp/master.qcow2" } }
# <- { "return": {} }
-#
##
{ 'command': 'block-stream',
'data': { '*job-id': 'str', 'device': 'str', '*base': 'str',
#
# Throttling can be disabled by setting the speed to 0.
#
-# @device: The job identifier. This used to be a device name (hence
-# the name of the parameter), but since QEMU 2.7 it can have
-# other values.
+# @device: The job identifier. This used to be a device name (hence
+# the name of the parameter), but since QEMU 2.7 it can have other
+# values.
#
# @speed: the maximum speed, in bytes per second, or 0 for unlimited.
-# Defaults to 0.
+# Defaults to 0.
#
-# Returns: - Nothing on success
-# - If no background operation is active on this device, DeviceNotActive
+# Returns:
+# - Nothing on success
+# - If no background operation is active on this device,
+# DeviceNotActive
#
# Since: 1.1
##
#
# Stop an active background block operation.
#
-# This command returns immediately after marking the active background block
-# operation for cancellation. It is an error to call this command if no
-# operation is in progress.
+# This command returns immediately after marking the active background
+# block operation for cancellation. It is an error to call this
+# command if no operation is in progress.
#
# The operation will cancel as soon as possible and then emit the
-# BLOCK_JOB_CANCELLED event. Before that happens the job is still visible when
-# enumerated using query-block-jobs.
-#
-# Note that if you issue 'block-job-cancel' after 'drive-mirror' has indicated
-# (via the event BLOCK_JOB_READY) that the source and destination are
-# synchronized, then the event triggered by this command changes to
-# BLOCK_JOB_COMPLETED, to indicate that the mirroring has ended and the
-# destination now has a point-in-time copy tied to the time of the cancellation.
-#
-# For streaming, the image file retains its backing file unless the streaming
-# operation happens to complete just as it is being cancelled. A new streaming
-# operation can be started at a later time to finish copying all data from the
-# backing file.
-#
-# @device: The job identifier. This used to be a device name (hence
-# the name of the parameter), but since QEMU 2.7 it can have
-# other values.
-#
-# @force: If true, and the job has already emitted the event BLOCK_JOB_READY,
-# abandon the job immediately (even if it is paused) instead of waiting
-# for the destination to complete its final synchronization (since 1.3)
-#
-# Returns: - Nothing on success
-# - If no background operation is active on this device, DeviceNotActive
+# BLOCK_JOB_CANCELLED event. Before that happens the job is still
+# visible when enumerated using query-block-jobs.
+#
+# Note that if you issue 'block-job-cancel' after 'drive-mirror' has
+# indicated (via the event BLOCK_JOB_READY) that the source and
+# destination are synchronized, then the event triggered by this
+# command changes to BLOCK_JOB_COMPLETED, to indicate that the
+# mirroring has ended and the destination now has a point-in-time copy
+# tied to the time of the cancellation.
+#
+# For streaming, the image file retains its backing file unless the
+# streaming operation happens to complete just as it is being
+# cancelled. A new streaming operation can be started at a later time
+# to finish copying all data from the backing file.
+#
+# @device: The job identifier. This used to be a device name (hence
+# the name of the parameter), but since QEMU 2.7 it can have other
+# values.
+#
+# @force: If true, and the job has already emitted the event
+# BLOCK_JOB_READY, abandon the job immediately (even if it is
+# paused) instead of waiting for the destination to complete its
+# final synchronization (since 1.3)
+#
+# Returns:
+# - Nothing on success
+# - If no background operation is active on this device,
+# DeviceNotActive
#
# Since: 1.1
##
#
# Pause an active background block operation.
#
-# This command returns immediately after marking the active background block
-# operation for pausing. It is an error to call this command if no
-# operation is in progress or if the job is already paused.
+# This command returns immediately after marking the active background
+# block operation for pausing. It is an error to call this command if
+# no operation is in progress or if the job is already paused.
#
-# The operation will pause as soon as possible. No event is emitted when
-# the operation is actually paused. Cancelling a paused job automatically
-# resumes it.
+# The operation will pause as soon as possible. No event is emitted
+# when the operation is actually paused. Cancelling a paused job
+# automatically resumes it.
#
-# @device: The job identifier. This used to be a device name (hence
-# the name of the parameter), but since QEMU 2.7 it can have
-# other values.
+# @device: The job identifier. This used to be a device name (hence
+# the name of the parameter), but since QEMU 2.7 it can have other
+# values.
#
-# Returns: - Nothing on success
-# - If no background operation is active on this device, DeviceNotActive
+# Returns:
+# - Nothing on success
+# - If no background operation is active on this device,
+# DeviceNotActive
#
# Since: 1.3
##
#
# Resume an active background block operation.
#
-# This command returns immediately after resuming a paused background block
-# operation. It is an error to call this command if no operation is in
-# progress or if the job is not paused.
+# This command returns immediately after resuming a paused background
+# block operation. It is an error to call this command if no
+# operation is in progress or if the job is not paused.
#
# This command also clears the error status of the job.
#
-# @device: The job identifier. This used to be a device name (hence
-# the name of the parameter), but since QEMU 2.7 it can have
-# other values.
+# @device: The job identifier. This used to be a device name (hence
+# the name of the parameter), but since QEMU 2.7 it can have other
+# values.
#
-# Returns: - Nothing on success
-# - If no background operation is active on this device, DeviceNotActive
+# Returns:
+# - Nothing on success
+# - If no background operation is active on this device,
+# DeviceNotActive
#
# Since: 1.3
##
##
# @block-job-complete:
#
-# Manually trigger completion of an active background block operation. This
-# is supported for drive mirroring, where it also switches the device to
-# write to the target path only. The ability to complete is signaled with
-# a BLOCK_JOB_READY event.
+# Manually trigger completion of an active background block operation.
+# This is supported for drive mirroring, where it also switches the
+# device to write to the target path only. The ability to complete is
+# signaled with a BLOCK_JOB_READY event.
#
-# This command completes an active background block operation synchronously.
-# The ordering of this command's return with the BLOCK_JOB_COMPLETED event
-# is not defined. Note that if an I/O error occurs during the processing of
-# this command: 1) the command itself will fail; 2) the error will be processed
-# according to the rerror/werror arguments that were specified when starting
-# the operation.
+# This command completes an active background block operation
+# synchronously. The ordering of this command's return with the
+# BLOCK_JOB_COMPLETED event is not defined. Note that if an I/O error
+# occurs during the processing of this command: 1) the command itself
+# will fail; 2) the error will be processed according to the
+# rerror/werror arguments that were specified when starting the
+# operation.
#
# A cancelled or paused job cannot be completed.
#
-# @device: The job identifier. This used to be a device name (hence
-# the name of the parameter), but since QEMU 2.7 it can have
-# other values.
+# @device: The job identifier. This used to be a device name (hence
+# the name of the parameter), but since QEMU 2.7 it can have other
+# values.
#
-# Returns: - Nothing on success
-# - If no background operation is active on this device, DeviceNotActive
+# Returns:
+# - Nothing on success
+# - If no background operation is active on this device,
+# DeviceNotActive
#
# Since: 1.3
##
##
# @block-job-dismiss:
#
-# For jobs that have already concluded, remove them from the block-job-query
-# list. This command only needs to be run for jobs which were started with
-# QEMU 2.12+ job lifetime management semantics.
+# For jobs that have already concluded, remove them from the
+# block-job-query list. This command only needs to be run for jobs
+# which were started with QEMU 2.12+ job lifetime management
+# semantics.
#
-# This command will refuse to operate on any job that has not yet reached
-# its terminal state, JOB_STATUS_CONCLUDED. For jobs that make use of the
-# BLOCK_JOB_READY event, block-job-cancel or block-job-complete will still need
-# to be used as appropriate.
+# This command will refuse to operate on any job that has not yet
+# reached its terminal state, JOB_STATUS_CONCLUDED. For jobs that make
+# use of the BLOCK_JOB_READY event, block-job-cancel or
+# block-job-complete will still need to be used as appropriate.
#
# @id: The job identifier.
#
# @block-job-finalize:
#
# Once a job that has manual=true reaches the pending state, it can be
-# instructed to finalize any graph changes and do any necessary cleanup
-# via this command.
-# For jobs in a transaction, instructing one job to finalize will force
-# ALL jobs in the transaction to finalize, so it is only necessary to instruct
-# a single member job to finalize.
+# instructed to finalize any graph changes and do any necessary
+# cleanup via this command. For jobs in a transaction, instructing
+# one job to finalize will force ALL jobs in the transaction to
+# finalize, so it is only necessary to instruct a single member job to
+# finalize.
#
# @id: The job identifier.
#
'allow-preconfig': true }
##
+# @BlockJobChangeOptionsMirror:
+#
+# @copy-mode: Switch to this copy mode. Currently, only the switch
+# from 'background' to 'write-blocking' is implemented.
+#
+# Since: 8.2
+##
+{ 'struct': 'BlockJobChangeOptionsMirror',
+ 'data': { 'copy-mode' : 'MirrorCopyMode' } }
+
+##
+# @BlockJobChangeOptions:
+#
+# Block job options that can be changed after job creation.
+#
+# @id: The job identifier
+#
+# @type: The job type
+#
+# Since 8.2
+##
+{ 'union': 'BlockJobChangeOptions',
+ 'base': { 'id': 'str', 'type': 'JobType' },
+ 'discriminator': 'type',
+ 'data': { 'mirror': 'BlockJobChangeOptionsMirror' } }
+
+##
+# @block-job-change:
+#
+# Change the block job's options.
+#
+# Since: 8.2
+##
+{ 'command': 'block-job-change',
+ 'data': 'BlockJobChangeOptions', 'boxed': true }
+
+##
# @BlockdevDiscardOptions:
#
# Determines how to handle discard requests.
#
# @ignore: Ignore the request
+#
# @unmap: Forward as an unmap request
#
# Since: 2.9
# @BlockdevDetectZeroesOptions:
#
# Describes the operation mode for the automatic conversion of plain
-# zero writes by the OS to driver specific optimized zero write commands.
+# zero writes by the OS to driver specific optimized zero write
+# commands.
#
# @off: Disabled (default)
+#
# @on: Enabled
-# @unmap: Enabled and even try to unmap blocks if possible. This requires
-# also that @BlockdevDiscardOptions is set to unmap for this device.
+#
+# @unmap: Enabled and even try to unmap blocks if possible. This
+# requires also that @BlockdevDiscardOptions is set to unmap for
+# this device.
#
# Since: 2.1
##
# Selects the AIO backend to handle I/O requests
#
# @threads: Use qemu's thread pool
+#
# @native: Use native AIO backend (only Linux and Windows)
+#
# @io_uring: Use linux io_uring (since 5.0)
#
# Since: 2.9
# Includes cache-related options for block devices
#
# @direct: enables use of O_DIRECT (bypass the host page cache;
-# default: false)
-# @no-flush: ignore any flush requests for the device (default:
-# false)
+# default: false)
+#
+# @no-flush: ignore any flush requests for the device (default: false)
#
# Since: 2.9
##
# Drivers that are supported in block device operations.
#
# @throttle: Since 2.11
+#
# @nvme: Since 2.12
+#
# @copy-on-read: Since 3.0
+#
# @blklogwrites: Since 3.0
+#
# @blkreplay: Since 4.2
+#
# @compress: Since 5.0
+#
# @copy-before-write: Since 6.2
+#
# @snapshot-access: Since 7.0
#
# Since: 2.9
# Driver specific block device options for the file backend.
#
# @filename: path to the image file
-# @pr-manager: the id for the object that will handle persistent reservations
-# for this device (default: none, forward the commands via SG_IO;
-# since 2.11)
+#
+# @pr-manager: the id for the object that will handle persistent
+# reservations for this device (default: none, forward the
+# commands via SG_IO; since 2.11)
+#
# @aio: AIO backend (default: threads) (since: 2.8)
-# @aio-max-batch: maximum number of requests to batch together into a single
-# submission in the AIO backend. The smallest value between
-# this and the aio-max-batch value of the IOThread object is
-# chosen.
-# 0 means that the AIO backend will handle it automatically.
-# (default: 0, since 6.2)
-# @locking: whether to enable file locking. If set to 'auto', only enable
-# when Open File Descriptor (OFD) locking API is available
-# (default: auto, since 2.10)
-# @drop-cache: invalidate page cache during live migration. This prevents
-# stale data on the migration destination with cache.direct=off.
-# Currently only supported on Linux hosts.
-# (default: on, since: 4.0)
-# @x-check-cache-dropped: whether to check that page cache was dropped on live
-# migration. May cause noticeable delays if the image
-# file is large, do not use in production.
-# (default: off) (since: 3.0)
+#
+# @aio-max-batch: maximum number of requests to batch together into a
+# single submission in the AIO backend. The smallest value
+# between this and the aio-max-batch value of the IOThread object
+# is chosen. 0 means that the AIO backend will handle it
+# automatically. (default: 0, since 6.2)
+#
+# @locking: whether to enable file locking. If set to 'auto', only
+# enable when Open File Descriptor (OFD) locking API is available
+# (default: auto, since 2.10)
+#
+# @drop-cache: invalidate page cache during live migration. This
+# prevents stale data on the migration destination with
+# cache.direct=off. Currently only supported on Linux hosts.
+# (default: on, since: 4.0)
+#
+# @x-check-cache-dropped: whether to check that page cache was dropped
+# on live migration. May cause noticeable delays if the image
+# file is large, do not use in production. (default: off)
+# (since: 3.0)
#
# Features:
-# @dynamic-auto-read-only: If present, enabled auto-read-only means that the
-# driver will open the image read-only at first,
-# dynamically reopen the image file read-write when
-# the first writer is attached to the node and reopen
-# read-only when the last writer is detached. This
-# allows giving QEMU write permissions only on demand
-# when an operation actually needs write access.
+#
+# @dynamic-auto-read-only: If present, enabled auto-read-only means
+# that the driver will open the image read-only at first,
+# dynamically reopen the image file read-write when the first
+# writer is attached to the node and reopen read-only when the
+# last writer is detached. This allows giving QEMU write
+# permissions only on demand when an operation actually needs
+# write access.
+#
# @unstable: Member x-check-cache-dropped is meant for debugging.
#
# Since: 2.9
# Driver specific block device options for the null backend.
#
# @size: size of the device in bytes.
+#
# @latency-ns: emulated latency (in nanoseconds) in processing
-# requests. Default to zero which completes requests immediately.
-# (Since 2.4)
-# @read-zeroes: if true, reads from the device produce zeroes; if false, the
-# buffer is left unchanged. (default: false; since: 4.1)
+# requests. Default to zero which completes requests immediately.
+# (Since 2.4)
+#
+# @read-zeroes: if true, reads from the device produce zeroes; if
+# false, the buffer is left unchanged.
+# (default: false; since: 4.1)
#
# Since: 2.9
##
#
# Driver specific block device options for the NVMe backend.
#
-# @device: PCI controller address of the NVMe device in
-# format hhhh:bb:ss.f (host:bus:slot.function)
+# @device: PCI controller address of the NVMe device in format
+# hhhh:bb:ss.f (host:bus:slot.function)
+#
# @namespace: namespace number of the device, starting from 1.
#
# Note that the PCI @device must have been unbound from any host
# Driver specific block device options for the vvfat protocol.
#
# @dir: directory to be exported as FAT image
+#
# @fat-type: FAT type: 12, 16 or 32
-# @floppy: whether to export a floppy image (true) or
-# partitioned hard disk (false; default)
-# @label: set the volume label, limited to 11 bytes. FAT16 and
-# FAT32 traditionally have some restrictions on labels, which are
-# ignored by most operating systems. Defaults to "QEMU VVFAT".
-# (since 2.4)
+#
+# @floppy: whether to export a floppy image (true) or partitioned hard
+# disk (false; default)
+#
+# @label: set the volume label, limited to 11 bytes. FAT16 and FAT32
+# traditionally have some restrictions on labels, which are
+# ignored by most operating systems. Defaults to "QEMU VVFAT".
+# (since 2.4)
+#
# @rw: whether to allow write operations (default: false)
#
# Since: 2.9
##
# @BlockdevOptionsGenericFormat:
#
-# Driver specific block device options for image format that have no option
-# besides their data source.
+# Driver specific block device options for image format that have no
+# option besides their data source.
#
# @file: reference to or definition of the data source block device
#
#
# Driver specific block device options for LUKS.
#
-# @key-secret: the ID of a QCryptoSecret object providing
-# the decryption key (since 2.6). Mandatory except when
-# doing a metadata-only probe of the image.
+# @key-secret: the ID of a QCryptoSecret object providing the
+# decryption key (since 2.6). Mandatory except when doing a
+# metadata-only probe of the image.
#
# Since: 2.9
##
##
# @BlockdevOptionsGenericCOWFormat:
#
-# Driver specific block device options for image format that have no option
-# besides their data source and an optional backing file.
+# Driver specific block device options for image format that have no
+# option besides their data source and an optional backing file.
#
# @backing: reference to or definition of the backing file block
-# device, null disables the backing file entirely.
-# Defaults to the backing file stored the image file.
+# device, null disables the backing file entirely. Defaults to
+# the backing file stored the image file.
#
# Since: 2.9
##
#
# @none: Do not perform any checks
#
-# @constant: Perform only checks which can be done in constant time and
-# without reading anything from disk
+# @constant: Perform only checks which can be done in constant time
+# and without reading anything from disk
#
-# @cached: Perform only checks which can be done without reading anything
-# from disk
+# @cached: Perform only checks which can be done without reading
+# anything from disk
#
# @all: Perform all available overlap checks
#
##
# @Qcow2OverlapCheckFlags:
#
-# Structure of flags for each metadata structure. Setting a field to 'true'
-# makes qemu guard that structure against unintended overwriting. The default
-# value is chosen according to the template given.
+# Structure of flags for each metadata structure. Setting a field to
+# 'true' makes qemu guard that structure against unintended
+# overwriting. The default value is chosen according to the template
+# given.
#
-# @template: Specifies a template mode which can be adjusted using the other
-# flags, defaults to 'cached'
+# @template: Specifies a template mode which can be adjusted using the
+# other flags, defaults to 'cached'
#
# @bitmap-directory: since 3.0
#
##
# @Qcow2OverlapChecks:
#
-# Specifies which metadata structures should be guarded against unintended
-# overwriting.
+# Specifies which metadata structures should be guarded against
+# unintended overwriting.
#
-# @flags: set of flags for separate specification of each metadata structure
-# type
+# @flags: set of flags for separate specification of each metadata
+# structure type
#
# @mode: named mode which chooses a specific set of flags
#
#
# Driver specific block device options for qcow.
#
-# @encrypt: Image decryption options. Mandatory for
-# encrypted images, except when doing a metadata-only
-# probe of the image.
+# @encrypt: Image decryption options. Mandatory for encrypted images,
+# except when doing a metadata-only probe of the image.
#
# Since: 2.10
##
##
# @BlockdevOptionsPreallocate:
#
-# Filter driver intended to be inserted between format and protocol node
-# and do preallocation in protocol node on write.
+# Filter driver intended to be inserted between format and protocol
+# node and do preallocation in protocol node on write.
#
# @prealloc-align: on preallocation, align file length to this number,
-# default 1048576 (1M)
+# default 1048576 (1M)
#
# @prealloc-size: how much to preallocate, default 134217728 (128M)
#
#
# Driver specific block device options for qcow2.
#
-# @lazy-refcounts: whether to enable the lazy refcounts
-# feature (default is taken from the image file)
+# @lazy-refcounts: whether to enable the lazy refcounts feature
+# (default is taken from the image file)
#
-# @pass-discard-request: whether discard requests to the qcow2
-# device should be forwarded to the data source
+# @pass-discard-request: whether discard requests to the qcow2 device
+# should be forwarded to the data source
#
# @pass-discard-snapshot: whether discard requests for the data source
-# should be issued when a snapshot operation (e.g.
-# deleting a snapshot) frees clusters in the qcow2 file
+# should be issued when a snapshot operation (e.g. deleting a
+# snapshot) frees clusters in the qcow2 file
#
# @pass-discard-other: whether discard requests for the data source
-# should be issued on other occasions where a cluster
-# gets freed
-#
-# @overlap-check: which overlap checks to perform for writes
-# to the image, defaults to 'cached' (since 2.2)
-#
-# @cache-size: the maximum total size of the L2 table and
-# refcount block caches in bytes (since 2.2)
-#
-# @l2-cache-size: the maximum size of the L2 table cache in
-# bytes (since 2.2)
+# should be issued on other occasions where a cluster gets freed
+#
+# @discard-no-unref: when enabled, data clusters will remain
+# preallocated when they are no longer used, e.g. because they are
+# discarded or converted to zero clusters. As usual, whether the
+# old data is discarded or kept on the protocol level (i.e. in the
+# image file) depends on the setting of the pass-discard-request
+# option. Keeping the clusters preallocated prevents qcow2
+# fragmentation that would otherwise be caused by freeing and
+# re-allocating them later. Besides potential performance
+# degradation, such fragmentation can lead to increased allocation
+# of clusters past the end of the image file, resulting in image
+# files whose file length can grow much larger than their guest disk
+# size would suggest. If image file length is of concern (e.g. when
+# storing qcow2 images directly on block devices), you should
+# consider enabling this option. (since 8.1)
+#
+# @overlap-check: which overlap checks to perform for writes to the
+# image, defaults to 'cached' (since 2.2)
+#
+# @cache-size: the maximum total size of the L2 table and refcount
+# block caches in bytes (since 2.2)
+#
+# @l2-cache-size: the maximum size of the L2 table cache in bytes
+# (since 2.2)
#
# @l2-cache-entry-size: the size of each entry in the L2 cache in
-# bytes. It must be a power of two between 512
-# and the cluster size. The default value is
-# the cluster size (since 2.12)
+# bytes. It must be a power of two between 512 and the cluster
+# size. The default value is the cluster size (since 2.12)
#
# @refcount-cache-size: the maximum size of the refcount block cache
-# in bytes (since 2.2)
+# in bytes (since 2.2)
#
# @cache-clean-interval: clean unused entries in the L2 and refcount
-# caches. The interval is in seconds. The default value
-# is 600 on supporting platforms, and 0 on other
-# platforms. 0 disables this feature. (since 2.5)
+# caches. The interval is in seconds. The default value is 600
+# on supporting platforms, and 0 on other platforms. 0 disables
+# this feature. (since 2.5)
#
-# @encrypt: Image decryption options. Mandatory for
-# encrypted images, except when doing a metadata-only
-# probe of the image. (since 2.10)
+# @encrypt: Image decryption options. Mandatory for encrypted images,
+# except when doing a metadata-only probe of the image. (since
+# 2.10)
#
# @data-file: reference to or definition of the external data file.
-# This may only be specified for images that require an
-# external data file. If it is not specified for such
-# an image, the data file name is loaded from the image
-# file. (since 4.0)
+# This may only be specified for images that require an external
+# data file. If it is not specified for such an image, the data
+# file name is loaded from the image file. (since 4.0)
#
# Since: 2.9
##
'*pass-discard-request': 'bool',
'*pass-discard-snapshot': 'bool',
'*pass-discard-other': 'bool',
+ '*discard-no-unref': 'bool',
'*overlap-check': 'Qcow2OverlapChecks',
'*cache-size': 'int',
'*l2-cache-size': 'int',
# @SshHostKeyCheckMode:
#
# @none: Don't check the host key at all
+#
# @hash: Compare the host key with a given hash
+#
# @known_hosts: Check the host key against the known_hosts file
#
# Since: 2.12
# @SshHostKeyCheckHashType:
#
# @md5: The given hash is an md5 hash
+#
# @sha1: The given hash is an sha1 hash
+#
# @sha256: The given hash is an sha256 hash
#
# Since: 2.12
# @SshHostKeyHash:
#
# @type: The hash algorithm used for the hash
+#
# @hash: The expected hash value
#
# Since: 2.12
# @user: user as which to connect, defaults to current local user name
#
# @host-key-check: Defines how and what to check the host key against
-# (default: known_hosts)
+# (default: known_hosts)
#
# Since: 2.9
##
# Trigger events supported by blkdebug.
#
# @l1_shrink_write_table: write zeros to the l1 table to shrink image.
-# (since 2.11)
+# (since 2.11)
#
-# @l1_shrink_free_l2_clusters: discard the l2 tables. (since 2.11)
+# @l1_shrink_free_l2_clusters: discard the l2 tables. (since 2.11)
#
# @cor_write: a write due to copy-on-read (since 2.11)
#
-# @cluster_alloc_space: an allocation of file space for a cluster (since 4.1)
+# @cluster_alloc_space: an allocation of file space for a cluster
+# (since 4.1)
#
# @none: triggers once at creation of the blkdebug node (since 4.1)
#
#
# @event: trigger event
#
-# @state: the state identifier blkdebug needs to be in to
-# actually trigger the event; defaults to "any"
+# @state: the state identifier blkdebug needs to be in to actually
+# trigger the event; defaults to "any"
#
-# @iotype: the type of I/O operations on which this error should
-# be injected; defaults to "all read, write,
-# write-zeroes, discard, and flush operations"
-# (since: 4.1)
+# @iotype: the type of I/O operations on which this error should be
+# injected; defaults to "all read, write, write-zeroes, discard,
+# and flush operations" (since: 4.1)
#
-# @errno: error identifier (errno) to be returned; defaults to
-# EIO
+# @errno: error identifier (errno) to be returned; defaults to EIO
#
-# @sector: specifies the sector index which has to be affected
-# in order to actually trigger the event; defaults to "any
-# sector"
+# @sector: specifies the sector index which has to be affected in
+# order to actually trigger the event; defaults to "any sector"
#
-# @once: disables further events after this one has been
-# triggered; defaults to false
+# @once: disables further events after this one has been triggered;
+# defaults to false
#
# @immediately: fail immediately; defaults to false
#
# @event: trigger event
#
# @state: the current state identifier blkdebug needs to be in;
-# defaults to "any"
+# defaults to "any"
#
# @new_state: the state identifier blkdebug is supposed to assume if
-# this event is triggered
+# this event is triggered
#
# Since: 2.9
##
#
# @config: filename of the configuration file
#
-# @align: required alignment for requests in bytes, must be
-# positive power of 2, or 0 for default
+# @align: required alignment for requests in bytes, must be positive
+# power of 2, or 0 for default
#
# @max-transfer: maximum size for I/O transfers in bytes, must be
-# positive multiple of @align and of the underlying
-# file's request alignment (but need not be a power of
-# 2), or 0 for default (since 2.10)
+# positive multiple of @align and of the underlying file's request
+# alignment (but need not be a power of 2), or 0 for default
+# (since 2.10)
#
-# @opt-write-zero: preferred alignment for write zero requests in bytes,
-# must be positive multiple of @align and of the
-# underlying file's request alignment (but need not be a
-# power of 2), or 0 for default (since 2.10)
+# @opt-write-zero: preferred alignment for write zero requests in
+# bytes, must be positive multiple of @align and of the underlying
+# file's request alignment (but need not be a power of 2), or 0
+# for default (since 2.10)
#
-# @max-write-zero: maximum size for write zero requests in bytes, must be
-# positive multiple of @align, of @opt-write-zero, and of
-# the underlying file's request alignment (but need not
-# be a power of 2), or 0 for default (since 2.10)
+# @max-write-zero: maximum size for write zero requests in bytes, must
+# be positive multiple of @align, of @opt-write-zero, and of the
+# underlying file's request alignment (but need not be a power of
+# 2), or 0 for default (since 2.10)
#
-# @opt-discard: preferred alignment for discard requests in bytes, must
-# be positive multiple of @align and of the underlying
-# file's request alignment (but need not be a power of
-# 2), or 0 for default (since 2.10)
+# @opt-discard: preferred alignment for discard requests in bytes,
+# must be positive multiple of @align and of the underlying file's
+# request alignment (but need not be a power of 2), or 0 for
+# default (since 2.10)
#
# @max-discard: maximum size for discard requests in bytes, must be
-# positive multiple of @align, of @opt-discard, and of
-# the underlying file's request alignment (but need not
-# be a power of 2), or 0 for default (since 2.10)
+# positive multiple of @align, of @opt-discard, and of the
+# underlying file's request alignment (but need not be a power of
+# 2), or 0 for default (since 2.10)
#
# @inject-error: array of error injection descriptions
#
# @set-state: array of state-change descriptions
#
# @take-child-perms: Permissions to take on @image in addition to what
-# is necessary anyway (which depends on how the
-# blkdebug node is used). Defaults to none.
-# (since 5.0)
+# is necessary anyway (which depends on how the blkdebug node is
+# used). Defaults to none. (since 5.0)
#
# @unshare-child-perms: Permissions not to share on @image in addition
-# to what cannot be shared anyway (which depends
-# on how the blkdebug node is used). Defaults
-# to none. (since 5.0)
+# to what cannot be shared anyway (which depends on how the
+# blkdebug node is used). Defaults to none. (since 5.0)
#
# Since: 2.9
##
#
# @log: block device used to log writes to @file
#
-# @log-sector-size: sector size used in logging writes to @file, determines
-# granularity of offsets and sizes of writes (default: 512)
+# @log-sector-size: sector size used in logging writes to @file,
+# determines granularity of offsets and sizes of writes
+# (default: 512)
#
# @log-append: append to an existing log (default: false)
#
-# @log-super-update-interval: interval of write requests after which the log
-# super block is updated to disk (default: 4096)
+# @log-super-update-interval: interval of write requests after which
+# the log super block is updated to disk (default: 4096)
#
# Since: 3.0
##
#
# Driver specific block device options for Quorum
#
-# @blkverify: true if the driver must print content mismatch
-# set to false by default
+# @blkverify: true if the driver must print content mismatch set to
+# false by default
#
# @children: the children block devices to use
#
# @vote-threshold: the vote limit under which a read will fail
#
# @rewrite-corrupted: rewrite corrupted data when quorum is reached
-# (Since 2.1)
+# (Since 2.1)
#
# @read-pattern: choose read pattern and set to quorum by default
-# (Since 2.2)
+# (Since 2.2)
#
# Since: 2.9
##
#
# @server: gluster servers description
#
-# @debug: libgfapi log level (default '4' which is Error)
-# (Since 2.8)
+# @debug: libgfapi log level (default '4' which is Error) (Since 2.8)
#
# @logfile: libgfapi log file (default /dev/stderr) (Since 2.8)
#
#
# Driver specific block device options for the nvme-io_uring backend.
#
-# @path: path to the NVMe namespace's character device (e.g. /dev/ng0n1).
+# @path: path to the NVMe namespace's character device (e.g.
+# /dev/ng0n1).
#
# Since: 7.2
##
##
# @BlockdevOptionsVirtioBlkVfioPci:
#
-# Driver specific block device options for the virtio-blk-vfio-pci backend.
+# Driver specific block device options for the virtio-blk-vfio-pci
+# backend.
#
# @path: path to the PCI device's sysfs directory (e.g.
-# /sys/bus/pci/devices/0000:00:01.0).
+# /sys/bus/pci/devices/0000:00:01.0).
#
# Since: 7.2
##
##
# @BlockdevOptionsVirtioBlkVhostUser:
#
-# Driver specific block device options for the virtio-blk-vhost-user backend.
+# Driver specific block device options for the virtio-blk-vhost-user
+# backend.
#
# @path: path to the vhost-user UNIX domain socket.
#
##
# @BlockdevOptionsVirtioBlkVhostVdpa:
#
-# Driver specific block device options for the virtio-blk-vhost-vdpa backend.
+# Driver specific block device options for the virtio-blk-vhost-vdpa
+# backend.
#
# @path: path to the vhost-vdpa character device.
#
+# Features:
+# @fdset: Member @path supports the special "/dev/fdset/N" path
+# (since 8.1)
+#
# Since: 7.2
##
{ 'struct': 'BlockdevOptionsVirtioBlkVhostVdpa',
'data': { 'path': 'str' },
+ 'features': [ { 'name' :'fdset',
+ 'if': 'CONFIG_BLKIO_VHOST_VDPA_FD' } ],
'if': 'CONFIG_BLKIO' }
##
#
# @target: The target iqn name
#
-# @lun: LUN to connect to. Defaults to 0.
+# @lun: LUN to connect to. Defaults to 0.
#
-# @user: User name to log in with. If omitted, no CHAP
-# authentication is performed.
+# @user: User name to log in with. If omitted, no CHAP authentication
+# is performed.
#
-# @password-secret: The ID of a QCryptoSecret object providing
-# the password for the login. This option is required if
-# @user is specified.
+# @password-secret: The ID of a QCryptoSecret object providing the
+# password for the login. This option is required if @user is
+# specified.
#
-# @initiator-name: The iqn name we want to identify to the target
-# as. If this option is not specified, an initiator name is
-# generated automatically.
+# @initiator-name: The iqn name we want to identify to the target as.
+# If this option is not specified, an initiator name is generated
+# automatically.
#
-# @header-digest: The desired header digest. Defaults to
-# none-crc32c.
+# @header-digest: The desired header digest. Defaults to none-crc32c.
#
-# @timeout: Timeout in seconds after which a request will
-# timeout. 0 means no timeout and is the default.
+# @timeout: Timeout in seconds after which a request will timeout. 0
+# means no timeout and is the default.
#
# Driver specific block device options for iscsi
#
##
# @RbdImageEncryptionFormat:
#
+# @luks-any: Used for opening either luks or luks2 (Since 8.0)
+#
# Since: 6.1
##
{ 'enum': 'RbdImageEncryptionFormat',
- 'data': [ 'luks', 'luks2' ] }
+ 'data': [ 'luks', 'luks2', 'luks-any' ] }
##
# @RbdEncryptionOptionsLUKSBase:
#
-# @key-secret: ID of a QCryptoSecret object providing a passphrase
-# for unlocking the encryption
+# @key-secret: ID of a QCryptoSecret object providing a passphrase for
+# unlocking the encryption
#
# Since: 6.1
##
'data': { } }
##
+# @RbdEncryptionOptionsLUKSAny:
+#
+# Since: 8.0
+##
+{ 'struct': 'RbdEncryptionOptionsLUKSAny',
+ 'base': 'RbdEncryptionOptionsLUKSBase',
+ 'data': { } }
+
+##
# @RbdEncryptionCreateOptionsLUKS:
#
# Since: 6.1
##
# @RbdEncryptionOptions:
#
+# @format: Encryption format.
+#
+# @parent: Parent image encryption options (for cloned images). Can
+# be left unspecified if this cloned image is encrypted using the
+# same format and secret as its parent image (i.e. not explicitly
+# formatted) or if its parent image is not encrypted. (Since 8.0)
+#
# Since: 6.1
##
{ 'union': 'RbdEncryptionOptions',
- 'base': { 'format': 'RbdImageEncryptionFormat' },
+ 'base': { 'format': 'RbdImageEncryptionFormat',
+ '*parent': 'RbdEncryptionOptions' },
'discriminator': 'format',
'data': { 'luks': 'RbdEncryptionOptionsLUKS',
- 'luks2': 'RbdEncryptionOptionsLUKS2' } }
+ 'luks2': 'RbdEncryptionOptionsLUKS2',
+ 'luks-any': 'RbdEncryptionOptionsLUKSAny'} }
##
# @RbdEncryptionCreateOptions:
#
# @pool: Ceph pool name.
#
-# @namespace: Rados namespace name in the Ceph pool. (Since 5.0)
+# @namespace: Rados namespace name in the Ceph pool. (Since 5.0)
#
# @image: Image name in the Ceph pool.
#
-# @conf: path to Ceph configuration file. Values
-# in the configuration file will be overridden by
-# options specified via QAPI.
+# @conf: path to Ceph configuration file. Values in the configuration
+# file will be overridden by options specified via QAPI.
#
# @snapshot: Ceph snapshot name.
#
-# @encrypt: Image encryption options. (Since 6.1)
+# @encrypt: Image encryption options. (Since 6.1)
#
# @user: Ceph id name.
#
-# @auth-client-required: Acceptable authentication modes.
-# This maps to Ceph configuration option
-# "auth_client_required". (Since 3.0)
+# @auth-client-required: Acceptable authentication modes. This maps
+# to Ceph configuration option "auth_client_required". (Since
+# 3.0)
#
-# @key-secret: ID of a QCryptoSecret object providing a key
-# for cephx authentication.
-# This maps to Ceph configuration option
-# "key". (Since 3.0)
+# @key-secret: ID of a QCryptoSecret object providing a key for cephx
+# authentication. This maps to Ceph configuration option "key".
+# (Since 3.0)
#
-# @server: Monitor host address and port. This maps
-# to the "mon_host" Ceph option.
+# @server: Monitor host address and port. This maps to the "mon_host"
+# Ceph option.
#
# Since: 2.9
##
#
# An enumeration of replication modes.
#
-# @primary: Primary mode, the vm's state will be sent to secondary QEMU.
+# @primary: Primary mode, the vm's state will be sent to secondary
+# QEMU.
#
-# @secondary: Secondary mode, receive the vm's state from primary QEMU.
+# @secondary: Secondary mode, receive the vm's state from primary
+# QEMU.
#
# Since: 2.9
##
#
# @mode: the replication mode
#
-# @top-id: In secondary mode, node name or device ID of the root
-# node who owns the replication node chain. Must not be given in
-# primary mode.
+# @top-id: In secondary mode, node name or device ID of the root node
+# who owns the replication node chain. Must not be given in
+# primary mode.
#
# Since: 2.9
##
#
# @path: path of the image on the host
#
-# @user: UID value to use when talking to the
-# server (defaults to 65534 on Windows and getuid()
-# on unix)
+# @user: UID value to use when talking to the server (defaults to
+# 65534 on Windows and getuid() on unix)
#
-# @group: GID value to use when talking to the
-# server (defaults to 65534 on Windows and getgid()
-# in unix)
+# @group: GID value to use when talking to the server (defaults to
+# 65534 on Windows and getgid() in unix)
#
-# @tcp-syn-count: number of SYNs during the session
-# establishment (defaults to libnfs default)
+# @tcp-syn-count: number of SYNs during the session establishment
+# (defaults to libnfs default)
#
-# @readahead-size: set the readahead size in bytes (defaults
-# to libnfs default)
+# @readahead-size: set the readahead size in bytes (defaults to libnfs
+# default)
#
-# @page-cache-size: set the pagecache size in bytes (defaults
-# to libnfs default)
+# @page-cache-size: set the pagecache size in bytes (defaults to
+# libnfs default)
#
-# @debug: set the NFS debug level (max 2) (defaults
-# to libnfs default)
+# @debug: set the NFS debug level (max 2) (defaults to libnfs default)
#
# Since: 2.9
##
##
# @BlockdevOptionsCurlBase:
#
-# Driver specific block device options shared by all protocols supported by the
-# curl backend.
+# Driver specific block device options shared by all protocols
+# supported by the curl backend.
#
# @url: URL of the image file
#
-# @readahead: Size of the read-ahead cache; must be a multiple of
-# 512 (defaults to 256 kB)
+# @readahead: Size of the read-ahead cache; must be a multiple of 512
+# (defaults to 256 kB)
#
# @timeout: Timeout for connections, in seconds (defaults to 5)
#
# @username: Username for authentication (defaults to none)
#
# @password-secret: ID of a QCryptoSecret object providing a password
-# for authentication (defaults to no password)
+# for authentication (defaults to no password)
#
-# @proxy-username: Username for proxy authentication (defaults to none)
+# @proxy-username: Username for proxy authentication (defaults to
+# none)
#
-# @proxy-password-secret: ID of a QCryptoSecret object providing a password
-# for proxy authentication (defaults to no password)
+# @proxy-password-secret: ID of a QCryptoSecret object providing a
+# password for proxy authentication (defaults to no password)
#
# Since: 2.9
##
##
# @BlockdevOptionsCurlHttp:
#
-# Driver specific block device options for HTTP connections over the curl
-# backend. URLs must start with "http://".
+# Driver specific block device options for HTTP connections over the
+# curl backend. URLs must start with "http://".
#
-# @cookie: List of cookies to set; format is
-# "name1=content1; name2=content2;" as explained by
-# CURLOPT_COOKIE(3). Defaults to no cookies.
+# @cookie: List of cookies to set; format is "name1=content1;
+# name2=content2;" as explained by CURLOPT_COOKIE(3). Defaults to
+# no cookies.
#
-# @cookie-secret: ID of a QCryptoSecret object providing the cookie data in a
-# secure way. See @cookie for the format. (since 2.10)
+# @cookie-secret: ID of a QCryptoSecret object providing the cookie
+# data in a secure way. See @cookie for the format. (since 2.10)
#
# Since: 2.9
##
##
# @BlockdevOptionsCurlHttps:
#
-# Driver specific block device options for HTTPS connections over the curl
-# backend. URLs must start with "https://".
+# Driver specific block device options for HTTPS connections over the
+# curl backend. URLs must start with "https://".
#
-# @cookie: List of cookies to set; format is
-# "name1=content1; name2=content2;" as explained by
-# CURLOPT_COOKIE(3). Defaults to no cookies.
+# @cookie: List of cookies to set; format is "name1=content1;
+# name2=content2;" as explained by CURLOPT_COOKIE(3). Defaults to
+# no cookies.
#
-# @sslverify: Whether to verify the SSL certificate's validity (defaults to
-# true)
+# @sslverify: Whether to verify the SSL certificate's validity
+# (defaults to true)
#
-# @cookie-secret: ID of a QCryptoSecret object providing the cookie data in a
-# secure way. See @cookie for the format. (since 2.10)
+# @cookie-secret: ID of a QCryptoSecret object providing the cookie
+# data in a secure way. See @cookie for the format. (since 2.10)
#
# Since: 2.9
##
##
# @BlockdevOptionsCurlFtp:
#
-# Driver specific block device options for FTP connections over the curl
-# backend. URLs must start with "ftp://".
+# Driver specific block device options for FTP connections over the
+# curl backend. URLs must start with "ftp://".
#
# Since: 2.9
##
##
# @BlockdevOptionsCurlFtps:
#
-# Driver specific block device options for FTPS connections over the curl
-# backend. URLs must start with "ftps://".
+# Driver specific block device options for FTPS connections over the
+# curl backend. URLs must start with "ftps://".
#
-# @sslverify: Whether to verify the SSL certificate's validity (defaults to
-# true)
+# @sslverify: Whether to verify the SSL certificate's validity
+# (defaults to true)
#
# Since: 2.9
##
#
# @tls-creds: TLS credentials ID
#
-# @tls-hostname: TLS hostname override for certificate validation (Since 7.0)
-#
-# @x-dirty-bitmap: A metadata context name such as "qemu:dirty-bitmap:NAME"
-# or "qemu:allocation-depth" to query in place of the
-# traditional "base:allocation" block status (see
-# NBD_OPT_LIST_META_CONTEXT in the NBD protocol; and
-# yes, naming this option x-context would have made
-# more sense) (since 3.0)
-#
-# @reconnect-delay: On an unexpected disconnect, the nbd client tries to
-# connect again until succeeding or encountering a serious
-# error. During the first @reconnect-delay seconds, all
-# requests are paused and will be rerun on a successful
-# reconnect. After that time, any delayed requests and all
-# future requests before a successful reconnect will
-# immediately fail. Default 0 (Since 4.2)
-#
-# @open-timeout: In seconds. If zero, the nbd driver tries the connection
-# only once, and fails to open if the connection fails.
-# If non-zero, the nbd driver will repeat connection attempts
-# until successful or until @open-timeout seconds have elapsed.
-# Default 0 (Since 7.0)
+# @tls-hostname: TLS hostname override for certificate validation
+# (Since 7.0)
+#
+# @x-dirty-bitmap: A metadata context name such as
+# "qemu:dirty-bitmap:NAME" or "qemu:allocation-depth" to query in
+# place of the traditional "base:allocation" block status (see
+# NBD_OPT_LIST_META_CONTEXT in the NBD protocol; and yes, naming
+# this option x-context would have made more sense) (since 3.0)
+#
+# @reconnect-delay: On an unexpected disconnect, the nbd client tries
+# to connect again until succeeding or encountering a serious
+# error. During the first @reconnect-delay seconds, all requests
+# are paused and will be rerun on a successful reconnect. After
+# that time, any delayed requests and all future requests before a
+# successful reconnect will immediately fail. Default 0 (Since
+# 4.2)
+#
+# @open-timeout: In seconds. If zero, the nbd driver tries the
+# connection only once, and fails to open if the connection fails.
+# If non-zero, the nbd driver will repeat connection attempts
+# until successful or until @open-timeout seconds have elapsed.
+# Default 0 (Since 7.0)
#
# Features:
+#
# @unstable: Member @x-dirty-bitmap is experimental.
#
# Since: 2.9
# Driver specific block device options for the raw driver.
#
# @offset: position where the block device starts
+#
# @size: the assumed size of the device
#
# Since: 2.9
#
# Driver specific block device options for the throttle driver
#
-# @throttle-group: the name of the throttle-group object to use. It
-# must already exist.
+# @throttle-group: the name of the throttle-group object to use. It
+# must already exist.
+#
# @file: reference to or definition of the data source block device
#
# Since: 2.11
#
# Driver specific block device options for the copy-on-read driver.
#
-# @bottom: The name of a non-filter node (allocation-bearing layer) that
-# limits the COR operations in the backing chain (inclusive), so
-# that no data below this node will be copied by this filter.
-# If option is absent, the limit is not applied, so that data
-# from all backing layers may be copied.
+# @bottom: The name of a non-filter node (allocation-bearing layer)
+# that limits the COR operations in the backing chain (inclusive),
+# so that no data below this node will be copied by this filter.
+# If option is absent, the limit is not applied, so that data from
+# all backing layers may be copied.
#
# Since: 6.0
##
# An enumeration of possible behaviors for copy-before-write operation
# failures.
#
-# @break-guest-write: report the error to the guest. This way, the guest
-# will not be able to overwrite areas that cannot be
-# backed up, so the backup process remains valid.
+# @break-guest-write: report the error to the guest. This way, the
+# guest will not be able to overwrite areas that cannot be backed
+# up, so the backup process remains valid.
#
-# @break-snapshot: continue guest write. Doing so will make the provided
-# snapshot state invalid and any backup or export
-# process based on it will finally fail.
+# @break-snapshot: continue guest write. Doing so will make the
+# provided snapshot state invalid and any backup or export process
+# based on it will finally fail.
#
# Since: 7.1
##
##
# @BlockdevOptionsCbw:
#
-# Driver specific block device options for the copy-before-write driver,
-# which does so called copy-before-write operations: when data is
-# written to the filter, the filter first reads corresponding blocks
-# from its file child and copies them to @target child. After successfully
-# copying, the write request is propagated to file child. If copying
-# fails, the original write request is failed too and no data is written
-# to file child.
+# Driver specific block device options for the copy-before-write
+# driver, which does so called copy-before-write operations: when data
+# is written to the filter, the filter first reads corresponding
+# blocks from its file child and copies them to @target child. After
+# successfully copying, the write request is propagated to file child.
+# If copying fails, the original write request is failed too and no
+# data is written to file child.
#
# @target: The target for copy-before-write operations.
#
# @bitmap: If specified, copy-before-write filter will do
-# copy-before-write operations only for dirty regions of the
-# bitmap. Bitmap size must be equal to length of file and
-# target child of the filter. Note also, that bitmap is used
-# only to initialize internal bitmap of the process, so further
-# modifications (or removing) of specified bitmap doesn't
-# influence the filter. (Since 7.0)
+# copy-before-write operations only for dirty regions of the
+# bitmap. Bitmap size must be equal to length of file and target
+# child of the filter. Note also, that bitmap is used only to
+# initialize internal bitmap of the process, so further
+# modifications (or removing) of specified bitmap doesn't
+# influence the filter. (Since 7.0)
#
# @on-cbw-error: Behavior on failure of copy-before-write operation.
-# Default is @break-guest-write. (Since 7.1)
+# Default is @break-guest-write. (Since 7.1)
#
-# @cbw-timeout: Zero means no limit. Non-zero sets the timeout in seconds
-# for copy-before-write operation. When a timeout occurs,
-# the respective copy-before-write operation will fail, and
-# the @on-cbw-error parameter will decide how this failure
-# is handled. Default 0. (Since 7.1)
+# @cbw-timeout: Zero means no limit. Non-zero sets the timeout in
+# seconds for copy-before-write operation. When a timeout occurs,
+# the respective copy-before-write operation will fail, and the
+# @on-cbw-error parameter will decide how this failure is handled.
+# Default 0. (Since 7.1)
#
# Since: 6.2
##
##
# @BlockdevOptions:
#
-# Options for creating a block device. Many options are available for all
-# block devices, independent of the block driver:
+# Options for creating a block device. Many options are available for
+# all block devices, independent of the block driver:
#
# @driver: block driver name
-# @node-name: the node name of the new node (Since 2.0).
-# This option is required on the top level of blockdev-add.
-# Valid node names start with an alphabetic character and may
-# contain only alphanumeric characters, '-', '.' and '_'. Their
-# maximum length is 31 characters.
+#
+# @node-name: the node name of the new node (Since 2.0). This option
+# is required on the top level of blockdev-add. Valid node names
+# start with an alphabetic character and may contain only
+# alphanumeric characters, '-', '.' and '_'. Their maximum length
+# is 31 characters.
+#
# @discard: discard-related options (default: ignore)
+#
# @cache: cache-related options
-# @read-only: whether the block device should be read-only (default: false).
-# Note that some block drivers support only read-only access,
-# either generally or in certain configurations. In this case,
-# the default value does not work and the option must be
-# specified explicitly.
-# @auto-read-only: if true and @read-only is false, QEMU may automatically
-# decide not to open the image read-write as requested, but
-# fall back to read-only instead (and switch between the modes
-# later), e.g. depending on whether the image file is writable
-# or whether a writing user is attached to the node
-# (default: false, since 3.1)
+#
+# @read-only: whether the block device should be read-only (default:
+# false). Note that some block drivers support only read-only
+# access, either generally or in certain configurations. In this
+# case, the default value does not work and the option must be
+# specified explicitly.
+#
+# @auto-read-only: if true and @read-only is false, QEMU may
+# automatically decide not to open the image read-write as
+# requested, but fall back to read-only instead (and switch
+# between the modes later), e.g. depending on whether the image
+# file is writable or whether a writing user is attached to the
+# node (default: false, since 3.1)
+#
# @detect-zeroes: detect and optimize zero writes (Since 2.1)
-# (default: off)
-# @force-share: force share all permission on added nodes.
-# Requires read-only=true. (Since 2.10)
+# (default: off)
+#
+# @force-share: force share all permission on added nodes. Requires
+# read-only=true. (Since 2.10)
#
# Remaining options are determined by the block driver.
#
# Reference to a block device.
#
# @definition: defines a new block device inline
+#
# @reference: references the ID of an existing block device
#
# Since: 2.9
# Reference to a block device.
#
# @definition: defines a new block device inline
-# @reference: references the ID of an existing block device.
-# An empty string means that no block device should
-# be referenced. Deprecated; use null instead.
+#
+# @reference: references the ID of an existing block device. An empty
+# string means that no block device should be referenced.
+# Deprecated; use null instead.
+#
# @null: No block device should be referenced (since 2.10)
#
# Since: 2.9
#
# Since: 2.9
#
-# Example:
+# Examples:
#
-# 1.
# -> { "execute": "blockdev-add",
# "arguments": {
# "driver": "qcow2",
# }
# <- { "return": {} }
#
-# 2.
# -> { "execute": "blockdev-add",
# "arguments": {
# "driver": "qcow2",
# }
#
# <- { "return": {} }
-#
##
{ 'command': 'blockdev-add', 'data': 'BlockdevOptions', 'boxed': true,
'allow-preconfig': true }
# @blockdev-reopen:
#
# Reopens one or more block devices using the given set of options.
-# Any option not specified will be reset to its default value regardless
-# of its previous status. If an option cannot be changed or a particular
-# driver does not support reopening then the command will return an
-# error. All devices in the list are reopened in one transaction, so
-# if one of them fails then the whole transaction is cancelled.
-#
-# The command receives a list of block devices to reopen. For each one
-# of them, the top-level @node-name option (from BlockdevOptions) must be
-# specified and is used to select the block device to be reopened.
-# Other @node-name options must be either omitted or set to the
-# current name of the appropriate node. This command won't change any
-# node name and any attempt to do it will result in an error.
+# Any option not specified will be reset to its default value
+# regardless of its previous status. If an option cannot be changed
+# or a particular driver does not support reopening then the command
+# will return an error. All devices in the list are reopened in one
+# transaction, so if one of them fails then the whole transaction is
+# cancelled.
+#
+# The command receives a list of block devices to reopen. For each
+# one of them, the top-level @node-name option (from BlockdevOptions)
+# must be specified and is used to select the block device to be
+# reopened. Other @node-name options must be either omitted or set to
+# the current name of the appropriate node. This command won't change
+# any node name and any attempt to do it will result in an error.
#
# In the case of options that refer to child nodes, the behavior of
# this command depends on the value:
#
# 4) NULL: the current child (if any) is detached.
#
-# Options (1) and (2) are supported in all cases. Option (3) is
+# Options (1) and (2) are supported in all cases. Option (3) is
# supported for @file and @backing, and option (4) for @backing only.
#
# Unlike with blockdev-add, the @backing option must always be present
##
# @blockdev-del:
#
-# Deletes a block device that has been added using blockdev-add.
-# The command will fail if the node is attached to a device or is
+# Deletes a block device that has been added using blockdev-add. The
+# command will fail if the node is attached to a device or is
# otherwise being used.
#
# @node-name: Name of the graph node to delete.
# "arguments": { "node-name": "node0" }
# }
# <- { "return": {} }
-#
##
{ 'command': 'blockdev-del', 'data': { 'node-name': 'str' },
'allow-preconfig': true }
# Driver specific image creation options for file.
#
# @filename: Filename for the new image file
+#
# @size: Size of the virtual disk in bytes
+#
# @preallocation: Preallocation mode for the new image (default: off;
-# allowed values: off,
-# falloc (if CONFIG_POSIX_FALLOCATE),
-# full (if CONFIG_POSIX))
+# allowed values: off, falloc (if CONFIG_POSIX_FALLOCATE), full
+# (if CONFIG_POSIX))
+#
# @nocow: Turn off copy-on-write (valid only on btrfs; default: off)
-# @extent-size-hint: Extent size hint to add to the image file; 0 for not
-# adding an extent size hint (default: 1 MB, since 5.1)
+#
+# @extent-size-hint: Extent size hint to add to the image file; 0 for
+# not adding an extent size hint (default: 1 MB, since 5.1)
#
# Since: 2.12
##
# Driver specific image creation options for gluster.
#
# @location: Where to store the new image file
+#
# @size: Size of the virtual disk in bytes
+#
# @preallocation: Preallocation mode for the new image (default: off;
-# allowed values: off,
-# falloc (if CONFIG_GLUSTERFS_FALLOCATE),
-# full (if CONFIG_GLUSTERFS_ZEROFILL))
+# allowed values: off, falloc (if CONFIG_GLUSTERFS_FALLOCATE),
+# full (if CONFIG_GLUSTERFS_ZEROFILL))
#
# Since: 2.12
##
# Driver specific image creation options for LUKS.
#
# @file: Node to create the image format on
+#
# @size: Size of the virtual disk in bytes
-# @preallocation: Preallocation mode for the new image
-# (since: 4.2)
-# (default: off; allowed values: off, metadata, falloc, full)
+#
+# @preallocation: Preallocation mode for the new image (since: 4.2)
+# (default: off; allowed values: off, metadata, falloc, full)
#
# Since: 2.12
##
# Driver specific image creation options for NFS.
#
# @location: Where to store the new image file
+#
# @size: Size of the virtual disk in bytes
#
# Since: 2.12
# Driver specific image creation options for parallels.
#
# @file: Node to create the image format on
+#
# @size: Size of the virtual disk in bytes
+#
# @cluster-size: Cluster size in bytes (default: 1 MB)
#
# Since: 2.12
# Driver specific image creation options for qcow.
#
# @file: Node to create the image format on
+#
# @size: Size of the virtual disk in bytes
+#
# @backing-file: File name of the backing file if a backing file
-# should be used
+# should be used
+#
# @encrypt: Encryption options if the image should be encrypted
#
# Since: 2.12
##
# @BlockdevQcow2Version:
#
-# @v2: The original QCOW2 format as introduced in qemu 0.10 (version 2)
+# @v2: The original QCOW2 format as introduced in qemu 0.10 (version
+# 2)
+#
# @v3: The extended QCOW2 format as introduced in qemu 1.1 (version 3)
#
# Since: 2.12
# Compression type used in qcow2 image file
#
# @zlib: zlib compression, see <http://zlib.net/>
+#
# @zstd: zstd compression, see <http://github.com/facebook/zstd>
#
# Since: 5.1
# Driver specific image creation options for qcow2.
#
# @file: Node to create the image format on
+#
# @data-file: Node to use as an external data file in which all guest
-# data is stored so that only metadata remains in the qcow2
-# file (since: 4.0)
+# data is stored so that only metadata remains in the qcow2 file
+# (since: 4.0)
+#
# @data-file-raw: True if the external data file must stay valid as a
-# standalone (read-only) raw image without looking at qcow2
-# metadata (default: false; since: 4.0)
+# standalone (read-only) raw image without looking at qcow2
+# metadata (default: false; since: 4.0)
+#
# @extended-l2: True to make the image have extended L2 entries
-# (default: false; since 5.2)
+# (default: false; since 5.2)
+#
# @size: Size of the virtual disk in bytes
+#
# @version: Compatibility level (default: v3)
+#
# @backing-file: File name of the backing file if a backing file
-# should be used
+# should be used
+#
# @backing-fmt: Name of the block driver to use for the backing file
+#
# @encrypt: Encryption options if the image should be encrypted
+#
# @cluster-size: qcow2 cluster size in bytes (default: 65536)
+#
# @preallocation: Preallocation mode for the new image (default: off;
-# allowed values: off, falloc, full, metadata)
-# @lazy-refcounts: True if refcounts may be updated lazily (default: off)
+# allowed values: off, falloc, full, metadata)
+#
+# @lazy-refcounts: True if refcounts may be updated lazily
+# (default: off)
+#
# @refcount-bits: Width of reference counts in bits (default: 16)
+#
# @compression-type: The image cluster compression method
-# (default: zlib, since 5.1)
+# (default: zlib, since 5.1)
#
# Since: 2.12
##
# Driver specific image creation options for qed.
#
# @file: Node to create the image format on
+#
# @size: Size of the virtual disk in bytes
+#
# @backing-file: File name of the backing file if a backing file
-# should be used
+# should be used
+#
# @backing-fmt: Name of the block driver to use for the backing file
+#
# @cluster-size: Cluster size in bytes (default: 65536)
+#
# @table-size: L1/L2 table size (in clusters)
#
# Since: 2.12
#
# Driver specific image creation options for rbd/Ceph.
#
-# @location: Where to store the new image file. This location cannot
-# point to a snapshot.
+# @location: Where to store the new image file. This location cannot
+# point to a snapshot.
+#
# @size: Size of the virtual disk in bytes
+#
# @cluster-size: RBD object size
-# @encrypt: Image encryption options. (Since 6.1)
+#
+# @encrypt: Image encryption options. (Since 6.1)
#
# Since: 2.12
##
#
# @monolithicFlat: Single flat data image and a descriptor file
#
-# @twoGbMaxExtentSparse: Data is split into 2GB (per virtual LBA) sparse extent
-# files, in addition to a descriptor file
+# @twoGbMaxExtentSparse: Data is split into 2GB (per virtual LBA)
+# sparse extent files, in addition to a descriptor file
#
-# @twoGbMaxExtentFlat: Data is split into 2GB (per virtual LBA) flat extent
-# files, in addition to a descriptor file
+# @twoGbMaxExtentFlat: Data is split into 2GB (per virtual LBA) flat
+# extent files, in addition to a descriptor file
#
-# @streamOptimized: Single file image sparse cluster allocation, optimized
-# for streaming over network.
+# @streamOptimized: Single file image sparse cluster allocation,
+# optimized for streaming over network.
#
# Since: 4.0
##
#
# Driver specific image creation options for VMDK.
#
-# @file: Where to store the new image file. This refers to the image
-# file for monolithcSparse and streamOptimized format, or the
-# descriptor file for other formats.
+# @file: Where to store the new image file. This refers to the image
+# file for monolithcSparse and streamOptimized format, or the
+# descriptor file for other formats.
+#
# @size: Size of the virtual disk in bytes
-# @extents: Where to store the data extents. Required for monolithcFlat,
-# twoGbMaxExtentSparse and twoGbMaxExtentFlat formats. For
-# monolithicFlat, only one entry is required; for
-# twoGbMaxExtent* formats, the number of entries required is
-# calculated as extent_number = virtual_size / 2GB. Providing
-# more extents than will be used is an error.
-# @subformat: The subformat of the VMDK image. Default: "monolithicSparse".
-# @backing-file: The path of backing file. Default: no backing file is used.
-# @adapter-type: The adapter type used to fill in the descriptor. Default: ide.
-# @hwversion: Hardware version. The meaningful options are "4" or "6".
-# Default: "4".
-# @toolsversion: VMware guest tools version.
-# Default: "2147483647" (Since 6.2)
-# @zeroed-grain: Whether to enable zeroed-grain feature for sparse subformats.
-# Default: false.
+#
+# @extents: Where to store the data extents. Required for
+# monolithcFlat, twoGbMaxExtentSparse and twoGbMaxExtentFlat
+# formats. For monolithicFlat, only one entry is required; for
+# twoGbMaxExtent* formats, the number of entries required is
+# calculated as extent_number = virtual_size / 2GB. Providing more
+# extents than will be used is an error.
+#
+# @subformat: The subformat of the VMDK image. Default:
+# "monolithicSparse".
+#
+# @backing-file: The path of backing file. Default: no backing file
+# is used.
+#
+# @adapter-type: The adapter type used to fill in the descriptor.
+# Default: ide.
+#
+# @hwversion: Hardware version. The meaningful options are "4" or
+# "6". Default: "4".
+#
+# @toolsversion: VMware guest tools version. Default: "2147483647"
+# (Since 6.2)
+#
+# @zeroed-grain: Whether to enable zeroed-grain feature for sparse
+# subformats. Default: false.
#
# Since: 4.0
##
# Driver specific image creation options for SSH.
#
# @location: Where to store the new image file
+#
# @size: Size of the virtual disk in bytes
#
# Since: 2.12
# Driver specific image creation options for VDI.
#
# @file: Node to create the image format on
+#
# @size: Size of the virtual disk in bytes
+#
# @preallocation: Preallocation mode for the new image (default: off;
-# allowed values: off, metadata)
+# allowed values: off, metadata)
#
# Since: 2.12
##
# @BlockdevVhdxSubformat:
#
# @dynamic: Growing image file
+#
# @fixed: Preallocated fixed-size image file
#
# Since: 2.12
# Driver specific image creation options for vhdx.
#
# @file: Node to create the image format on
+#
# @size: Size of the virtual disk in bytes
-# @log-size: Log size in bytes, must be a multiple of 1 MB
-# (default: 1 MB)
+#
+# @log-size: Log size in bytes, must be a multiple of 1 MB (default: 1
+# MB)
+#
# @block-size: Block size in bytes, must be a multiple of 1 MB and not
-# larger than 256 MB (default: automatically choose a block
-# size depending on the image size)
+# larger than 256 MB (default: automatically choose a block size
+# depending on the image size)
+#
# @subformat: vhdx subformat (default: dynamic)
-# @block-state-zero: Force use of payload blocks of type 'ZERO'. Non-standard,
-# but default. Do not set to 'off' when using 'qemu-img
-# convert' with subformat=dynamic.
+#
+# @block-state-zero: Force use of payload blocks of type 'ZERO'.
+# Non-standard, but default. Do not set to 'off' when using
+# 'qemu-img convert' with subformat=dynamic.
#
# Since: 2.12
##
# @BlockdevVpcSubformat:
#
# @dynamic: Growing image file
+#
# @fixed: Preallocated fixed-size image file
#
# Since: 2.12
# Driver specific image creation options for vpc (VHD).
#
# @file: Node to create the image format on
+#
# @size: Size of the virtual disk in bytes
+#
# @subformat: vhdx subformat (default: dynamic)
-# @force-size: Force use of the exact byte size instead of rounding to the
-# next size that can be represented in CHS geometry
-# (default: false)
+#
+# @force-size: Force use of the exact byte size instead of rounding to
+# the next size that can be represented in CHS geometry
+# (default: false)
#
# Since: 2.12
##
##
# @blockdev-create:
#
-# Starts a job to create an image format on a given node. The job is
+# Starts a job to create an image format on a given node. The job is
# automatically finalized, but a manual job-dismiss is required.
#
# @job-id: Identifier for the newly created job.
##
# @BlockdevAmendOptionsQcow2:
#
-# Driver specific image amend options for qcow2.
-# For now, only encryption options can be amended
+# Driver specific image amend options for qcow2. For now, only
+# encryption options can be amended
#
-# @encrypt Encryption options to be amended
+# @encrypt: Encryption options to be amended
#
# Since: 5.1
##
##
# @x-blockdev-amend:
#
-# Starts a job to amend format specific options of an existing open block device
-# The job is automatically finalized, but a manual job-dismiss is required.
+# Starts a job to amend format specific options of an existing open
+# block device The job is automatically finalized, but a manual
+# job-dismiss is required.
#
# @job-id: Identifier for the newly created job.
#
#
# @options: Options (driver specific)
#
-# @force: Allow unsafe operations, format specific
-# For luks that allows erase of the last active keyslot
-# (permanent loss of data),
-# and replacement of an active keyslot
-# (possible loss of data if IO error happens)
+# @force: Allow unsafe operations, format specific For luks that
+# allows erase of the last active keyslot (permanent loss of
+# data), and replacement of an active keyslot (possible loss of
+# data if IO error happens)
#
# Features:
+#
# @unstable: This command is experimental.
#
# Since: 5.1
##
# @BLOCK_IMAGE_CORRUPTED:
#
-# Emitted when a disk image is being marked corrupt. The image can be
-# identified by its device or node name. The 'device' field is always
+# Emitted when a disk image is being marked corrupt. The image can be
+# identified by its device or node name. The 'device' field is always
# present for compatibility reasons, but it can be empty ("") if the
# image does not have a device name associated.
#
-# @device: device name. This is always present for compatibility
-# reasons, but it can be empty ("") if the image does not
-# have a device name associated.
+# @device: device name. This is always present for compatibility
+# reasons, but it can be empty ("") if the image does not have a
+# device name associated.
#
# @node-name: node name (Since: 2.4)
#
# @msg: informative message for human consumption, such as the kind of
-# corruption being detected. It should not be parsed by machine as it is
-# not guaranteed to be stable
+# corruption being detected. It should not be parsed by machine
+# as it is not guaranteed to be stable
#
# @offset: if the corruption resulted from an image access, this is
-# the host's access offset into the image
+# the host's access offset into the image
#
-# @size: if the corruption resulted from an image access, this is
-# the access size
+# @size: if the corruption resulted from an image access, this is the
+# access size
#
-# @fatal: if set, the image is marked corrupt and therefore unusable after this
-# event and must be repaired (Since 2.2; before, every
-# BLOCK_IMAGE_CORRUPTED event was fatal)
+# @fatal: if set, the image is marked corrupt and therefore unusable
+# after this event and must be repaired (Since 2.2; before, every
+# BLOCK_IMAGE_CORRUPTED event was fatal)
#
# Note: If action is "stop", a STOP event will eventually follow the
-# BLOCK_IO_ERROR event.
+# BLOCK_IO_ERROR event.
#
# Example:
#
#
# Emitted when a disk I/O error occurs
#
-# @device: device name. This is always present for compatibility
-# reasons, but it can be empty ("") if the image does not
-# have a device name associated.
+# @device: device name. This is always present for compatibility
+# reasons, but it can be empty ("") if the image does not have a
+# device name associated.
#
-# @node-name: node name. Note that errors may be reported for the root node
-# that is directly attached to a guest device rather than for the
-# node where the error occurred. The node name is not present if
-# the drive is empty. (Since: 2.8)
+# @node-name: node name. Note that errors may be reported for the
+# root node that is directly attached to a guest device rather
+# than for the node where the error occurred. The node name is
+# not present if the drive is empty. (Since: 2.8)
#
# @operation: I/O operation
#
# @action: action that has been taken
#
-# @nospace: true if I/O error was caused due to a no-space
-# condition. This key is only present if query-block's
-# io-status is present, please see query-block documentation
-# for more information (since: 2.2)
+# @nospace: true if I/O error was caused due to a no-space condition.
+# This key is only present if query-block's io-status is present,
+# please see query-block documentation for more information
+# (since: 2.2)
#
-# @reason: human readable string describing the error cause.
-# (This field is a debugging aid for humans, it should not
-# be parsed by applications) (since: 2.2)
+# @reason: human readable string describing the error cause. (This
+# field is a debugging aid for humans, it should not be parsed by
+# applications) (since: 2.2)
#
# Note: If action is "stop", a STOP event will eventually follow the
-# BLOCK_IO_ERROR event
+# BLOCK_IO_ERROR event
#
# Since: 0.13
#
# "action": "stop",
# "reason": "No space left on device" },
# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-#
##
{ 'event': 'BLOCK_IO_ERROR',
'data': { 'device': 'str', '*node-name': 'str',
#
# @type: job type
#
-# @device: The job identifier. Originally the device name but other
-# values are allowed since QEMU 2.7
+# @device: The job identifier. Originally the device name but other
+# values are allowed since QEMU 2.7
#
# @len: maximum progress value
#
-# @offset: current progress value. On success this is equal to len.
-# On failure this is less than len
+# @offset: current progress value. On success this is equal to len.
+# On failure this is less than len
#
# @speed: rate limit, bytes per second
#
-# @error: error message. Only present on failure. This field
-# contains a human-readable error message. There are no semantics
-# other than that streaming has failed and clients should not try to
-# interpret the error string
+# @error: error message. Only present on failure. This field
+# contains a human-readable error message. There are no semantics
+# other than that streaming has failed and clients should not try
+# to interpret the error string
#
# Since: 1.1
#
# "len": 10737418240, "offset": 10737418240,
# "speed": 0 },
# "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-#
##
{ 'event': 'BLOCK_JOB_COMPLETED',
'data': { 'type' : 'JobType',
#
# @type: job type
#
-# @device: The job identifier. Originally the device name but other
-# values are allowed since QEMU 2.7
+# @device: The job identifier. Originally the device name but other
+# values are allowed since QEMU 2.7
#
# @len: maximum progress value
#
-# @offset: current progress value. On success this is equal to len.
-# On failure this is less than len
+# @offset: current progress value. On success this is equal to len.
+# On failure this is less than len
#
# @speed: rate limit, bytes per second
#
# "len": 10737418240, "offset": 134217728,
# "speed": 0 },
# "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
-#
##
{ 'event': 'BLOCK_JOB_CANCELLED',
'data': { 'type' : 'JobType',
#
# Emitted when a block job encounters an error
#
-# @device: The job identifier. Originally the device name but other
-# values are allowed since QEMU 2.7
+# @device: The job identifier. Originally the device name but other
+# values are allowed since QEMU 2.7
#
# @operation: I/O operation
#
# "operation": "write",
# "action": "stop" },
# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-#
##
{ 'event': 'BLOCK_JOB_ERROR',
'data': { 'device' : 'str',
#
# @type: job type
#
-# @device: The job identifier. Originally the device name but other
-# values are allowed since QEMU 2.7
+# @device: The job identifier. Originally the device name but other
+# values are allowed since QEMU 2.7
#
# @len: maximum progress value
#
-# @offset: current progress value. On success this is equal to len.
-# On failure this is less than len
+# @offset: current progress value. On success this is equal to len.
+# On failure this is less than len
#
# @speed: rate limit, bytes per second
#
-# Note: The "ready to complete" status is always reset by a @BLOCK_JOB_ERROR
-# event
+# Note: The "ready to complete" status is always reset by a
+# @BLOCK_JOB_ERROR event
#
# Since: 1.3
#
# "data": { "device": "drive0", "type": "mirror", "speed": 0,
# "len": 2097152, "offset": 2097152 },
# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-#
##
{ 'event': 'BLOCK_JOB_READY',
'data': { 'type' : 'JobType',
##
# @BLOCK_JOB_PENDING:
#
-# Emitted when a block job is awaiting explicit authorization to finalize graph
-# changes via @block-job-finalize. If this job is part of a transaction, it will
-# not emit this event until the transaction has converged first.
+# Emitted when a block job is awaiting explicit authorization to
+# finalize graph changes via @block-job-finalize. If this job is part
+# of a transaction, it will not emit this event until the transaction
+# has converged first.
#
# @type: job type
#
# <- { "event": "BLOCK_JOB_PENDING",
# "data": { "type": "mirror", "id": "backup_1" },
# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-#
##
{ 'event': 'BLOCK_JOB_PENDING',
'data': { 'type' : 'JobType',
# Preallocation mode of QEMU image file
#
# @off: no preallocation
+#
# @metadata: preallocate only for metadata
+#
# @falloc: like @full preallocation but allocate disk space by
-# posix_fallocate() rather than writing data.
+# posix_fallocate() rather than writing data.
+#
# @full: preallocate all data by writing it to the device to ensure
-# disk space is really available. This data may or may not be
-# zero, depending on the image format and storage.
-# @full preallocation also sets up metadata correctly.
+# disk space is really available. This data may or may not be
+# zero, depending on the image format and storage. @full
+# preallocation also sets up metadata correctly.
#
# Since: 2.2
##
# @BLOCK_WRITE_THRESHOLD:
#
# Emitted when writes on block device reaches or exceeds the
-# configured write threshold. For thin-provisioned devices, this
-# means the device should be extended to avoid pausing for
-# disk exhaustion.
-# The event is one shot. Once triggered, it needs to be
+# configured write threshold. For thin-provisioned devices, this
+# means the device should be extended to avoid pausing for disk
+# exhaustion. The event is one shot. Once triggered, it needs to be
# re-registered with another block-set-write-threshold command.
#
# @node-name: graph node name on which the threshold was exceeded.
#
-# @amount-exceeded: amount of data which exceeded the threshold, in bytes.
+# @amount-exceeded: amount of data which exceeded the threshold, in
+# bytes.
#
# @write-threshold: last configured threshold, in bytes.
#
##
# @block-set-write-threshold:
#
-# Change the write threshold for a block drive. An event will be
+# Change the write threshold for a block drive. An event will be
# delivered if a write to this block drive crosses the configured
-# threshold. The threshold is an offset, thus must be
-# non-negative. Default is no write threshold. Setting the threshold
-# to zero disables it.
+# threshold. The threshold is an offset, thus must be non-negative.
+# Default is no write threshold. Setting the threshold to zero
+# disables it.
#
-# This is useful to transparently resize thin-provisioned drives without
-# the guest OS noticing.
+# This is useful to transparently resize thin-provisioned drives
+# without the guest OS noticing.
#
# @node-name: graph node name on which the threshold must be set.
#
# @write-threshold: configured threshold for the block device, bytes.
-# Use 0 to disable the threshold.
+# Use 0 to disable the threshold.
#
# Since: 2.3
#
# "arguments": { "node-name": "mydev",
# "write-threshold": 17179869184 } }
# <- { "return": {} }
-#
##
{ 'command': 'block-set-write-threshold',
'data': { 'node-name': 'str', 'write-threshold': 'uint64' },
##
# @x-blockdev-change:
#
-# Dynamically reconfigure the block driver state graph. It can be used
-# to add, remove, insert or replace a graph node. Currently only the
-# Quorum driver implements this feature to add or remove its child. This
-# is useful to fix a broken quorum child.
+# Dynamically reconfigure the block driver state graph. It can be
+# used to add, remove, insert or replace a graph node. Currently only
+# the Quorum driver implements this feature to add or remove its
+# child. This is useful to fix a broken quorum child.
#
-# If @node is specified, it will be inserted under @parent. @child
-# may not be specified in this case. If both @parent and @child are
+# If @node is specified, it will be inserted under @parent. @child
+# may not be specified in this case. If both @parent and @child are
# specified but @node is not, @child will be detached from @parent.
#
# @parent: the id or name of the parent node.
# @node: the name of the node that will be added.
#
# Features:
-# @unstable: This command is experimental, and its API is not stable. It
-# does not support all kinds of operations, all kinds of
-# children, nor all block drivers.
#
-# FIXME Removing children from a quorum node means introducing
-# gaps in the child indices. This cannot be represented in the
-# 'children' list of BlockdevOptionsQuorum, as returned by
-# .bdrv_refresh_filename().
+# @unstable: This command is experimental, and its API is not stable.
+# It does not support all kinds of operations, all kinds of
+# children, nor all block drivers.
+#
+# FIXME Removing children from a quorum node means introducing
+# gaps in the child indices. This cannot be represented in the
+# 'children' list of BlockdevOptionsQuorum, as returned by
+# .bdrv_refresh_filename().
#
-# Warning: The data in a new quorum child MUST be consistent
-# with that of the rest of the array.
+# Warning: The data in a new quorum child MUST be consistent with
+# that of the rest of the array.
#
# Since: 2.7
#
-# Example:
+# Examples:
#
# 1. Add a new node to a quorum
+#
# -> { "execute": "blockdev-add",
# "arguments": {
# "driver": "raw",
# <- { "return": {} }
#
# 2. Delete a quorum's node
+#
# -> { "execute": "x-blockdev-change",
# "arguments": { "parent": "disk1",
# "child": "children.1" } }
# <- { "return": {} }
-#
##
{ 'command': 'x-blockdev-change',
'data' : { 'parent': 'str',
##
# @x-blockdev-set-iothread:
#
-# Move @node and its children into the @iothread. If @iothread is null then
-# move @node and its children into the main loop.
+# Move @node and its children into the @iothread. If @iothread is
+# null then move @node and its children into the main loop.
#
# The node must not be attached to a BlockBackend.
#
#
# @iothread: the name of the IOThread object or null for the main loop
#
-# @force: true if the node and its children should be moved when a BlockBackend
-# is already attached
+# @force: true if the node and its children should be moved when a
+# BlockBackend is already attached
#
# Features:
-# @unstable: This command is experimental and intended for test cases that
-# need control over IOThreads only.
+#
+# @unstable: This command is experimental and intended for test cases
+# that need control over IOThreads only.
#
# Since: 2.12
#
-# Example:
+# Examples:
#
# 1. Move a node into an IOThread
+#
# -> { "execute": "x-blockdev-set-iothread",
# "arguments": { "node-name": "disk1",
# "iothread": "iothread0" } }
# <- { "return": {} }
#
# 2. Move a node into the main loop
+#
# -> { "execute": "x-blockdev-set-iothread",
# "arguments": { "node-name": "disk1",
# "iothread": null } }
# <- { "return": {} }
-#
##
{ 'command': 'x-blockdev-set-iothread',
'data' : { 'node-name': 'str',
# <- { "event": "QUORUM_FAILURE",
# "data": { "reference": "usr1", "sector-num": 345435, "sectors-count": 5 },
# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
-#
##
{ 'event': 'QUORUM_FAILURE',
'data': { 'reference': 'str', 'sector-num': 'int', 'sectors-count': 'int' } }
#
# @type: quorum operation type (Since 2.6)
#
-# @error: error message. Only present on failure. This field
-# contains a human-readable error message. There are no semantics other
-# than that the block layer reported an error and clients should not
-# try to interpret the error string.
+# @error: error message. Only present on failure. This field
+# contains a human-readable error message. There are no semantics
+# other than that the block layer reported an error and clients
+# should not try to interpret the error string.
#
# @node-name: the graph node name of the block driver state
#
#
# Since: 2.0
#
-# Example:
+# Examples:
#
# 1. Read operation
#
-# { "event": "QUORUM_REPORT_BAD",
+# <- { "event": "QUORUM_REPORT_BAD",
# "data": { "node-name": "node0", "sector-num": 345435, "sectors-count": 5,
# "type": "read" },
# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
#
# 2. Flush operation
#
-# { "event": "QUORUM_REPORT_BAD",
+# <- { "event": "QUORUM_REPORT_BAD",
# "data": { "node-name": "node0", "sector-num": 0, "sectors-count": 2097120,
# "type": "flush", "error": "Broken pipe" },
# "timestamp": { "seconds": 1456406829, "microseconds": 291763 } }
-#
##
{ 'event': 'QUORUM_REPORT_BAD',
'data': { 'type': 'QuorumOpType', '*error': 'str', 'node-name': 'str',
##
# @BlockdevSnapshotInternal:
#
-# @device: the device name or node-name of a root node to generate the snapshot
-# from
+# @device: the device name or node-name of a root node to generate the
+# snapshot from
#
# @name: the name of the internal snapshot to be created
#
-# Notes: In transaction, if @name is empty, or any snapshot matching @name
-# exists, the operation will fail. Only some image formats support it,
-# for example, qcow2, and rbd.
+# Notes: In transaction, if @name is empty, or any snapshot matching
+# @name exists, the operation will fail. Only some image formats
+# support it, for example, qcow2, and rbd.
#
# Since: 1.7
##
# @blockdev-snapshot-internal-sync:
#
# Synchronously take an internal snapshot of a block device, when the
-# format of the image used supports it. If the name is an empty
+# format of the image used supports it. If the name is an empty
# string, or a snapshot with name already exists, the operation will
# fail.
#
-# For the arguments, see the documentation of BlockdevSnapshotInternal.
+# For the arguments, see the documentation of
+# BlockdevSnapshotInternal.
#
-# Returns: - nothing on success
-# - If @device is not a valid block device, GenericError
-# - If any snapshot matching @name exists, or @name is empty,
-# GenericError
-# - If the format of the image used does not support it,
-# BlockFormatFeatureNotSupported
+# Returns:
+# - nothing on success
+# - If @device is not a valid block device, GenericError
+# - If any snapshot matching @name exists, or @name is empty,
+# GenericError
+# - If the format of the image used does not support it,
+# GenericError
#
# Since: 1.7
#
# "name": "snapshot0" }
# }
# <- { "return": {} }
-#
##
{ 'command': 'blockdev-snapshot-internal-sync',
'data': 'BlockdevSnapshotInternal',
##
# @blockdev-snapshot-delete-internal-sync:
#
-# Synchronously delete an internal snapshot of a block device, when the format
-# of the image used support it. The snapshot is identified by name or id or
-# both. One of the name or id is required. Return SnapshotInfo for the
-# successfully deleted snapshot.
+# Synchronously delete an internal snapshot of a block device, when
+# the format of the image used support it. The snapshot is identified
+# by name or id or both. One of the name or id is required. Return
+# SnapshotInfo for the successfully deleted snapshot.
#
-# @device: the device name or node-name of a root node to delete the snapshot
-# from
+# @device: the device name or node-name of a root node to delete the
+# snapshot from
#
# @id: optional the snapshot's ID to be deleted
#
# @name: optional the snapshot's name to be deleted
#
-# Returns: - SnapshotInfo on success
-# - If @device is not a valid block device, GenericError
-# - If snapshot not found, GenericError
-# - If the format of the image used does not support it,
-# BlockFormatFeatureNotSupported
-# - If @id and @name are both not specified, GenericError
+# Returns:
+# - SnapshotInfo on success
+# - If @device is not a valid block device, GenericError
+# - If snapshot not found, GenericError
+# - If the format of the image used does not support it,
+# GenericError
+# - If @id and @name are both not specified, GenericError
#
# Since: 1.7
#
# "icount": 220414
# }
# }
-#
##
{ 'command': 'blockdev-snapshot-delete-internal-sync',
'data': { 'device': 'str', '*id': 'str', '*name': 'str'},