--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8723BPHYREG_H__
+#define __INC_HAL8723BPHYREG_H__
+
+#define rSYM_WLBT_PAPE_SEL 0x64
+//
+// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF
+// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
+// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
+// 3. RF register 0x00-2E
+// 4. Bit Mask for BB/RF register
+// 5. Other defintion for BB/RF R/W
+//
+
+
+//
+// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
+// 1. Page1(0x100)
+//
+#define rPMAC_Reset 0x100
+#define rPMAC_TxStart 0x104
+#define rPMAC_TxLegacySIG 0x108
+#define rPMAC_TxHTSIG1 0x10c
+#define rPMAC_TxHTSIG2 0x110
+#define rPMAC_PHYDebug 0x114
+#define rPMAC_TxPacketNum 0x118
+#define rPMAC_TxIdle 0x11c
+#define rPMAC_TxMACHeader0 0x120
+#define rPMAC_TxMACHeader1 0x124
+#define rPMAC_TxMACHeader2 0x128
+#define rPMAC_TxMACHeader3 0x12c
+#define rPMAC_TxMACHeader4 0x130
+#define rPMAC_TxMACHeader5 0x134
+#define rPMAC_TxDataType 0x138
+#define rPMAC_TxRandomSeed 0x13c
+#define rPMAC_CCKPLCPPreamble 0x140
+#define rPMAC_CCKPLCPHeader 0x144
+#define rPMAC_CCKCRC16 0x148
+#define rPMAC_OFDMRxCRC32OK 0x170
+#define rPMAC_OFDMRxCRC32Er 0x174
+#define rPMAC_OFDMRxParityEr 0x178
+#define rPMAC_OFDMRxCRC8Er 0x17c
+#define rPMAC_CCKCRxRC16Er 0x180
+#define rPMAC_CCKCRxRC32Er 0x184
+#define rPMAC_CCKCRxRC32OK 0x188
+#define rPMAC_TxStatus 0x18c
+
+//
+// 2. Page2(0x200)
+//
+// The following two definition are only used for USB interface.
+#define RF_BB_CMD_ADDR 0x02c0 // RF/BB read/write command address.
+#define RF_BB_CMD_DATA 0x02c4 // RF/BB read/write command data.
+
+//
+// 3. Page8(0x800)
+//
+#define rFPGA0_RFMOD 0x800 //RF mode & CCK TxSC // RF BW Setting??
+
+#define rFPGA0_TxInfo 0x804 // Status report??
+#define rFPGA0_PSDFunction 0x808
+
+#define rFPGA0_TxGainStage 0x80c // Set TX PWR init gain?
+
+#define rFPGA0_RFTiming1 0x810 // Useless now
+#define rFPGA0_RFTiming2 0x814
+
+#define rFPGA0_XA_HSSIParameter1 0x820 // RF 3 wire register
+#define rFPGA0_XA_HSSIParameter2 0x824
+#define rFPGA0_XB_HSSIParameter1 0x828
+#define rFPGA0_XB_HSSIParameter2 0x82c
+#define rTxAGC_B_Rate18_06 0x830
+#define rTxAGC_B_Rate54_24 0x834
+#define rTxAGC_B_CCK1_55_Mcs32 0x838
+#define rTxAGC_B_Mcs03_Mcs00 0x83c
+
+#define rTxAGC_B_Mcs07_Mcs04 0x848
+#define rTxAGC_B_Mcs11_Mcs08 0x84c
+
+#define rFPGA0_XA_LSSIParameter 0x840
+#define rFPGA0_XB_LSSIParameter 0x844
+
+#define rFPGA0_RFWakeUpParameter 0x850 // Useless now
+#define rFPGA0_RFSleepUpParameter 0x854
+
+#define rFPGA0_XAB_SwitchControl 0x858 // RF Channel switch
+#define rFPGA0_XCD_SwitchControl 0x85c
+
+#define rFPGA0_XA_RFInterfaceOE 0x860 // RF Channel switch
+#define rFPGA0_XB_RFInterfaceOE 0x864
+
+#define rTxAGC_B_Mcs15_Mcs12 0x868
+#define rTxAGC_B_CCK11_A_CCK2_11 0x86c
+
+#define rFPGA0_XAB_RFInterfaceSW 0x870 // RF Interface Software Control
+#define rFPGA0_XCD_RFInterfaceSW 0x874
+
+#define rFPGA0_XAB_RFParameter 0x878 // RF Parameter
+#define rFPGA0_XCD_RFParameter 0x87c
+
+#define rFPGA0_AnalogParameter1 0x880 // Crystal cap setting RF-R/W protection for parameter4??
+#define rFPGA0_AnalogParameter2 0x884
+#define rFPGA0_AnalogParameter3 0x888 // Useless now
+#define rFPGA0_AnalogParameter4 0x88c
+
+#define rFPGA0_XA_LSSIReadBack 0x8a0 // Tranceiver LSSI Readback
+#define rFPGA0_XB_LSSIReadBack 0x8a4
+#define rFPGA0_XC_LSSIReadBack 0x8a8
+#define rFPGA0_XD_LSSIReadBack 0x8ac
+
+#define rFPGA0_PSDReport 0x8b4 // Useless now
+#define TransceiverA_HSPI_Readback 0x8b8 // Transceiver A HSPI Readback
+#define TransceiverB_HSPI_Readback 0x8bc // Transceiver B HSPI Readback
+#define rFPGA0_XAB_RFInterfaceRB 0x8e0 // Useless now // RF Interface Readback Value
+#define rFPGA0_XCD_RFInterfaceRB 0x8e4 // Useless now
+
+//
+// 4. Page9(0x900)
+//
+#define rFPGA1_RFMOD 0x900 //RF mode & OFDM TxSC // RF BW Setting??
+#define rFPGA1_TxBlock 0x904 // Useless now
+#define rFPGA1_DebugSelect 0x908 // Useless now
+#define rFPGA1_TxInfo 0x90c // Useless now // Status report??
+#define rDPDT_control 0x92c
+#define rfe_ctrl_anta_src 0x930
+#define rS0S1_PathSwitch 0x948
+
+//
+// 5. PageA(0xA00)
+//
+// Set Control channel to upper or lower. These settings are required only for 40MHz
+#define rCCK0_System 0xa00
+
+#define rCCK0_AFESetting 0xa04 // Disable init gain now // Select RX path by RSSI
+#define rCCK0_CCA 0xa08 // Disable init gain now // Init gain
+
+#define rCCK0_RxAGC1 0xa0c //AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series
+#define rCCK0_RxAGC2 0xa10 //AGC & DAGC
+
+#define rCCK0_RxHP 0xa14
+
+#define rCCK0_DSPParameter1 0xa18 //Timing recovery & Channel estimation threshold
+#define rCCK0_DSPParameter2 0xa1c //SQ threshold
+
+#define rCCK0_TxFilter1 0xa20
+#define rCCK0_TxFilter2 0xa24
+#define rCCK0_DebugPort 0xa28 //debug port and Tx filter3
+#define rCCK0_FalseAlarmReport 0xa2c //0xa2d useless now 0xa30-a4f channel report
+#define rCCK0_TRSSIReport 0xa50
+#define rCCK0_RxReport 0xa54 //0xa57
+#define rCCK0_FACounterLower 0xa5c //0xa5b
+#define rCCK0_FACounterUpper 0xa58 //0xa5c
+
+//
+// PageB(0xB00)
+//
+#define rPdp_AntA 0xb00
+#define rPdp_AntA_4 0xb04
+#define rPdp_AntA_8 0xb08
+#define rPdp_AntA_C 0xb0c
+#define rPdp_AntA_10 0xb10
+#define rPdp_AntA_14 0xb14
+#define rPdp_AntA_18 0xb18
+#define rPdp_AntA_1C 0xb1c
+#define rPdp_AntA_20 0xb20
+#define rPdp_AntA_24 0xb24
+
+#define rConfig_Pmpd_AntA 0xb28
+#define rConfig_ram64x16 0xb2c
+
+#define rBndA 0xb30
+#define rHssiPar 0xb34
+
+#define rConfig_AntA 0xb68
+#define rConfig_AntB 0xb6c
+
+#define rPdp_AntB 0xb70
+#define rPdp_AntB_4 0xb74
+#define rPdp_AntB_8 0xb78
+#define rPdp_AntB_C 0xb7c
+#define rPdp_AntB_10 0xb80
+#define rPdp_AntB_14 0xb84
+#define rPdp_AntB_18 0xb88
+#define rPdp_AntB_1C 0xb8c
+#define rPdp_AntB_20 0xb90
+#define rPdp_AntB_24 0xb94
+
+#define rConfig_Pmpd_AntB 0xb98
+
+#define rBndB 0xba0
+
+#define rAPK 0xbd8
+#define rPm_Rx0_AntA 0xbdc
+#define rPm_Rx1_AntA 0xbe0
+#define rPm_Rx2_AntA 0xbe4
+#define rPm_Rx3_AntA 0xbe8
+#define rPm_Rx0_AntB 0xbec
+#define rPm_Rx1_AntB 0xbf0
+#define rPm_Rx2_AntB 0xbf4
+#define rPm_Rx3_AntB 0xbf8
+//
+// 6. PageC(0xC00)
+//
+#define rOFDM0_LSTF 0xc00
+
+#define rOFDM0_TRxPathEnable 0xc04
+#define rOFDM0_TRMuxPar 0xc08
+#define rOFDM0_TRSWIsolation 0xc0c
+
+#define rOFDM0_XARxAFE 0xc10 //RxIQ DC offset, Rx digital filter, DC notch filter
+#define rOFDM0_XARxIQImbalance 0xc14 //RxIQ imblance matrix
+#define rOFDM0_XBRxAFE 0xc18
+#define rOFDM0_XBRxIQImbalance 0xc1c
+#define rOFDM0_XCRxAFE 0xc20
+#define rOFDM0_XCRxIQImbalance 0xc24
+#define rOFDM0_XDRxAFE 0xc28
+#define rOFDM0_XDRxIQImbalance 0xc2c
+
+#define rOFDM0_RxDetector1 0xc30 //PD,BW & SBD // DM tune init gain
+#define rOFDM0_RxDetector2 0xc34 //SBD & Fame Sync.
+#define rOFDM0_RxDetector3 0xc38 //Frame Sync.
+#define rOFDM0_RxDetector4 0xc3c //PD, SBD, Frame Sync & Short-GI
+
+#define rOFDM0_RxDSP 0xc40 //Rx Sync Path
+#define rOFDM0_CFOandDAGC 0xc44 //CFO & DAGC
+#define rOFDM0_CCADropThreshold 0xc48 //CCA Drop threshold
+#define rOFDM0_ECCAThreshold 0xc4c // energy CCA
+
+#define rOFDM0_XAAGCCore1 0xc50 // DIG
+#define rOFDM0_XAAGCCore2 0xc54
+#define rOFDM0_XBAGCCore1 0xc58
+#define rOFDM0_XBAGCCore2 0xc5c
+#define rOFDM0_XCAGCCore1 0xc60
+#define rOFDM0_XCAGCCore2 0xc64
+#define rOFDM0_XDAGCCore1 0xc68
+#define rOFDM0_XDAGCCore2 0xc6c
+
+#define rOFDM0_AGCParameter1 0xc70
+#define rOFDM0_AGCParameter2 0xc74
+#define rOFDM0_AGCRSSITable 0xc78
+#define rOFDM0_HTSTFAGC 0xc7c
+
+#define rOFDM0_XATxIQImbalance 0xc80 // TX PWR TRACK and DIG
+#define rOFDM0_XATxAFE 0xc84
+#define rOFDM0_XBTxIQImbalance 0xc88
+#define rOFDM0_XBTxAFE 0xc8c
+#define rOFDM0_XCTxIQImbalance 0xc90
+#define rOFDM0_XCTxAFE 0xc94
+#define rOFDM0_XDTxIQImbalance 0xc98
+#define rOFDM0_XDTxAFE 0xc9c
+
+#define rOFDM0_RxIQExtAnta 0xca0
+#define rOFDM0_TxCoeff1 0xca4
+#define rOFDM0_TxCoeff2 0xca8
+#define rOFDM0_TxCoeff3 0xcac
+#define rOFDM0_TxCoeff4 0xcb0
+#define rOFDM0_TxCoeff5 0xcb4
+#define rOFDM0_TxCoeff6 0xcb8
+#define rOFDM0_RxHPParameter 0xce0
+#define rOFDM0_TxPseudoNoiseWgt 0xce4
+#define rOFDM0_FrameSync 0xcf0
+#define rOFDM0_DFSReport 0xcf4
+
+//
+// 7. PageD(0xD00)
+//
+#define rOFDM1_LSTF 0xd00
+#define rOFDM1_TRxPathEnable 0xd04
+
+#define rOFDM1_CFO 0xd08 // No setting now
+#define rOFDM1_CSI1 0xd10
+#define rOFDM1_SBD 0xd14
+#define rOFDM1_CSI2 0xd18
+#define rOFDM1_CFOTracking 0xd2c
+#define rOFDM1_TRxMesaure1 0xd34
+#define rOFDM1_IntfDet 0xd3c
+#define rOFDM1_PseudoNoiseStateAB 0xd50
+#define rOFDM1_PseudoNoiseStateCD 0xd54
+#define rOFDM1_RxPseudoNoiseWgt 0xd58
+
+#define rOFDM_PHYCounter1 0xda0 //cca, parity fail
+#define rOFDM_PHYCounter2 0xda4 //rate illegal, crc8 fail
+#define rOFDM_PHYCounter3 0xda8 //MCS not support
+
+#define rOFDM_ShortCFOAB 0xdac // No setting now
+#define rOFDM_ShortCFOCD 0xdb0
+#define rOFDM_LongCFOAB 0xdb4
+#define rOFDM_LongCFOCD 0xdb8
+#define rOFDM_TailCFOAB 0xdbc
+#define rOFDM_TailCFOCD 0xdc0
+#define rOFDM_PWMeasure1 0xdc4
+#define rOFDM_PWMeasure2 0xdc8
+#define rOFDM_BWReport 0xdcc
+#define rOFDM_AGCReport 0xdd0
+#define rOFDM_RxSNR 0xdd4
+#define rOFDM_RxEVMCSI 0xdd8
+#define rOFDM_SIGReport 0xddc
+
+
+//
+// 8. PageE(0xE00)
+//
+#define rTxAGC_A_Rate18_06 0xe00
+#define rTxAGC_A_Rate54_24 0xe04
+#define rTxAGC_A_CCK1_Mcs32 0xe08
+#define rTxAGC_A_Mcs03_Mcs00 0xe10
+#define rTxAGC_A_Mcs07_Mcs04 0xe14
+#define rTxAGC_A_Mcs11_Mcs08 0xe18
+#define rTxAGC_A_Mcs15_Mcs12 0xe1c
+
+#define rFPGA0_IQK 0xe28
+#define rTx_IQK_Tone_A 0xe30
+#define rRx_IQK_Tone_A 0xe34
+#define rTx_IQK_PI_A 0xe38
+#define rRx_IQK_PI_A 0xe3c
+
+#define rTx_IQK 0xe40
+#define rRx_IQK 0xe44
+#define rIQK_AGC_Pts 0xe48
+#define rIQK_AGC_Rsp 0xe4c
+#define rTx_IQK_Tone_B 0xe50
+#define rRx_IQK_Tone_B 0xe54
+#define rTx_IQK_PI_B 0xe58
+#define rRx_IQK_PI_B 0xe5c
+#define rIQK_AGC_Cont 0xe60
+
+#define rBlue_Tooth 0xe6c
+#define rRx_Wait_CCA 0xe70
+#define rTx_CCK_RFON 0xe74
+#define rTx_CCK_BBON 0xe78
+#define rTx_OFDM_RFON 0xe7c
+#define rTx_OFDM_BBON 0xe80
+#define rTx_To_Rx 0xe84
+#define rTx_To_Tx 0xe88
+#define rRx_CCK 0xe8c
+
+#define rTx_Power_Before_IQK_A 0xe94
+#define rTx_Power_After_IQK_A 0xe9c
+
+#define rRx_Power_Before_IQK_A 0xea0
+#define rRx_Power_Before_IQK_A_2 0xea4
+#define rRx_Power_After_IQK_A 0xea8
+#define rRx_Power_After_IQK_A_2 0xeac
+
+#define rTx_Power_Before_IQK_B 0xeb4
+#define rTx_Power_After_IQK_B 0xebc
+
+#define rRx_Power_Before_IQK_B 0xec0
+#define rRx_Power_Before_IQK_B_2 0xec4
+#define rRx_Power_After_IQK_B 0xec8
+#define rRx_Power_After_IQK_B_2 0xecc
+
+#define rRx_OFDM 0xed0
+#define rRx_Wait_RIFS 0xed4
+#define rRx_TO_Rx 0xed8
+#define rStandby 0xedc
+#define rSleep 0xee0
+#define rPMPD_ANAEN 0xeec
+
+//
+// 7. RF Register 0x00-0x2E (RF 8256)
+// RF-0222D 0x00-3F
+//
+//Zebra1
+#define rZebra1_HSSIEnable 0x0 // Useless now
+#define rZebra1_TRxEnable1 0x1
+#define rZebra1_TRxEnable2 0x2
+#define rZebra1_AGC 0x4
+#define rZebra1_ChargePump 0x5
+#define rZebra1_Channel 0x7 // RF channel switch
+
+//#endif
+#define rZebra1_TxGain 0x8 // Useless now
+#define rZebra1_TxLPF 0x9
+#define rZebra1_RxLPF 0xb
+#define rZebra1_RxHPFCorner 0xc
+
+//Zebra4
+#define rGlobalCtrl 0 // Useless now
+#define rRTL8256_TxLPF 19
+#define rRTL8256_RxLPF 11
+
+//RTL8258
+#define rRTL8258_TxLPF 0x11 // Useless now
+#define rRTL8258_RxLPF 0x13
+#define rRTL8258_RSSILPF 0xa
+
+//
+// RL6052 Register definition
+//
+#define RF_AC 0x00 //
+
+#define RF_IQADJ_G1 0x01 //
+#define RF_IQADJ_G2 0x02 //
+#define RF_BS_PA_APSET_G1_G4 0x03
+#define RF_BS_PA_APSET_G5_G8 0x04
+#define RF_POW_TRSW 0x05 //
+
+#define RF_GAIN_RX 0x06 //
+#define RF_GAIN_TX 0x07 //
+
+#define RF_TXM_IDAC 0x08 //
+#define RF_IPA_G 0x09 //
+#define RF_TXBIAS_G 0x0A
+#define RF_TXPA_AG 0x0B
+#define RF_IPA_A 0x0C //
+#define RF_TXBIAS_A 0x0D
+#define RF_BS_PA_APSET_G9_G11 0x0E
+#define RF_BS_IQGEN 0x0F //
+
+#define RF_MODE1 0x10 //
+#define RF_MODE2 0x11 //
+
+#define RF_RX_AGC_HP 0x12 //
+#define RF_TX_AGC 0x13 //
+#define RF_BIAS 0x14 //
+#define RF_IPA 0x15 //
+#define RF_TXBIAS 0x16 //
+#define RF_POW_ABILITY 0x17 //
+#define RF_MODE_AG 0x18 //
+#define rRfChannel 0x18 // RF channel and BW switch
+#define RF_CHNLBW 0x18 // RF channel and BW switch
+#define RF_TOP 0x19 //
+
+#define RF_RX_G1 0x1A //
+#define RF_RX_G2 0x1B //
+
+#define RF_RX_BB2 0x1C //
+#define RF_RX_BB1 0x1D //
+
+#define RF_RCK1 0x1E //
+#define RF_RCK2 0x1F //
+
+#define RF_TX_G1 0x20 //
+#define RF_TX_G2 0x21 //
+#define RF_TX_G3 0x22 //
+
+#define RF_TX_BB1 0x23 //
+
+#define RF_T_METER 0x24 //
+
+#define RF_SYN_G1 0x25 // RF TX Power control
+#define RF_SYN_G2 0x26 // RF TX Power control
+#define RF_SYN_G3 0x27 // RF TX Power control
+#define RF_SYN_G4 0x28 // RF TX Power control
+#define RF_SYN_G5 0x29 // RF TX Power control
+#define RF_SYN_G6 0x2A // RF TX Power control
+#define RF_SYN_G7 0x2B // RF TX Power control
+#define RF_SYN_G8 0x2C // RF TX Power control
+
+#define RF_RCK_OS 0x30 // RF TX PA control
+
+#define RF_TXPA_G1 0x31 // RF TX PA control
+#define RF_TXPA_G2 0x32 // RF TX PA control
+#define RF_TXPA_G3 0x33 // RF TX PA control
+#define RF_TX_BIAS_A 0x35
+#define RF_TX_BIAS_D 0x36
+#define RF_LOBF_9 0x38
+#define RF_RXRF_A3 0x3C //
+#define RF_TRSW 0x3F
+
+#define RF_TXRF_A2 0x41
+#define RF_TXPA_G4 0x46
+#define RF_TXPA_A4 0x4B
+#define RF_0x52 0x52
+#define RF_WE_LUT 0xEF
+#define RF_S0S1 0xB0
+
+//
+//Bit Mask
+//
+// 1. Page1(0x100)
+#define bBBResetB 0x100 // Useless now?
+#define bGlobalResetB 0x200
+#define bOFDMTxStart 0x4
+#define bCCKTxStart 0x8
+#define bCRC32Debug 0x100
+#define bPMACLoopback 0x10
+#define bTxLSIG 0xffffff
+#define bOFDMTxRate 0xf
+#define bOFDMTxReserved 0x10
+#define bOFDMTxLength 0x1ffe0
+#define bOFDMTxParity 0x20000
+#define bTxHTSIG1 0xffffff
+#define bTxHTMCSRate 0x7f
+#define bTxHTBW 0x80
+#define bTxHTLength 0xffff00
+#define bTxHTSIG2 0xffffff
+#define bTxHTSmoothing 0x1
+#define bTxHTSounding 0x2
+#define bTxHTReserved 0x4
+#define bTxHTAggreation 0x8
+#define bTxHTSTBC 0x30
+#define bTxHTAdvanceCoding 0x40
+#define bTxHTShortGI 0x80
+#define bTxHTNumberHT_LTF 0x300
+#define bTxHTCRC8 0x3fc00
+#define bCounterReset 0x10000
+#define bNumOfOFDMTx 0xffff
+#define bNumOfCCKTx 0xffff0000
+#define bTxIdleInterval 0xffff
+#define bOFDMService 0xffff0000
+#define bTxMACHeader 0xffffffff
+#define bTxDataInit 0xff
+#define bTxHTMode 0x100
+#define bTxDataType 0x30000
+#define bTxRandomSeed 0xffffffff
+#define bCCKTxPreamble 0x1
+#define bCCKTxSFD 0xffff0000
+#define bCCKTxSIG 0xff
+#define bCCKTxService 0xff00
+#define bCCKLengthExt 0x8000
+#define bCCKTxLength 0xffff0000
+#define bCCKTxCRC16 0xffff
+#define bCCKTxStatus 0x1
+#define bOFDMTxStatus 0x2
+
+#define IS_BB_REG_OFFSET_92S(_Offset) ((_Offset >= 0x800) && (_Offset <= 0xfff))
+
+// 2. Page8(0x800)
+#define bRFMOD 0x1 // Reg 0x800 rFPGA0_RFMOD
+#define bJapanMode 0x2
+#define bCCKTxSC 0x30
+#define bCCKEn 0x1000000
+#define bOFDMEn 0x2000000
+
+#define bOFDMRxADCPhase 0x10000 // Useless now
+#define bOFDMTxDACPhase 0x40000
+#define bXATxAGC 0x3f
+
+#define bAntennaSelect 0x0300
+
+#define bXBTxAGC 0xf00 // Reg 80c rFPGA0_TxGainStage
+#define bXCTxAGC 0xf000
+#define bXDTxAGC 0xf0000
+
+#define bPAStart 0xf0000000 // Useless now
+#define bTRStart 0x00f00000
+#define bRFStart 0x0000f000
+#define bBBStart 0x000000f0
+#define bBBCCKStart 0x0000000f
+#define bPAEnd 0xf //Reg0x814
+#define bTREnd 0x0f000000
+#define bRFEnd 0x000f0000
+#define bCCAMask 0x000000f0 //T2R
+#define bR2RCCAMask 0x00000f00
+#define bHSSI_R2TDelay 0xf8000000
+#define bHSSI_T2RDelay 0xf80000
+#define bContTxHSSI 0x400 //chane gain at continue Tx
+#define bIGFromCCK 0x200
+#define bAGCAddress 0x3f
+#define bRxHPTx 0x7000
+#define bRxHPT2R 0x38000
+#define bRxHPCCKIni 0xc0000
+#define bAGCTxCode 0xc00000
+#define bAGCRxCode 0x300000
+
+#define b3WireDataLength 0x800 // Reg 0x820~84f rFPGA0_XA_HSSIParameter1
+#define b3WireAddressLength 0x400
+
+#define b3WireRFPowerDown 0x1 // Useless now
+//#define bHWSISelect 0x8
+#define b5GPAPEPolarity 0x40000000
+#define b2GPAPEPolarity 0x80000000
+#define bRFSW_TxDefaultAnt 0x3
+#define bRFSW_TxOptionAnt 0x30
+#define bRFSW_RxDefaultAnt 0x300
+#define bRFSW_RxOptionAnt 0x3000
+#define bRFSI_3WireData 0x1
+#define bRFSI_3WireClock 0x2
+#define bRFSI_3WireLoad 0x4
+#define bRFSI_3WireRW 0x8
+#define bRFSI_3Wire 0xf
+
+#define bRFSI_RFENV 0x10 // Reg 0x870 rFPGA0_XAB_RFInterfaceSW
+
+#define bRFSI_TRSW 0x20 // Useless now
+#define bRFSI_TRSWB 0x40
+#define bRFSI_ANTSW 0x100
+#define bRFSI_ANTSWB 0x200
+#define bRFSI_PAPE 0x400
+#define bRFSI_PAPE5G 0x800
+#define bBandSelect 0x1
+#define bHTSIG2_GI 0x80
+#define bHTSIG2_Smoothing 0x01
+#define bHTSIG2_Sounding 0x02
+#define bHTSIG2_Aggreaton 0x08
+#define bHTSIG2_STBC 0x30
+#define bHTSIG2_AdvCoding 0x40
+#define bHTSIG2_NumOfHTLTF 0x300
+#define bHTSIG2_CRC8 0x3fc
+#define bHTSIG1_MCS 0x7f
+#define bHTSIG1_BandWidth 0x80
+#define bHTSIG1_HTLength 0xffff
+#define bLSIG_Rate 0xf
+#define bLSIG_Reserved 0x10
+#define bLSIG_Length 0x1fffe
+#define bLSIG_Parity 0x20
+#define bCCKRxPhase 0x4
+
+#define bLSSIReadAddress 0x7f800000 // T65 RF
+
+#define bLSSIReadEdge 0x80000000 //LSSI "Read" edge signal
+
+#define bLSSIReadBackData 0xfffff // T65 RF
+
+#define bLSSIReadOKFlag 0x1000 // Useless now
+#define bCCKSampleRate 0x8 //0: 44MHz, 1:88MHz
+#define bRegulator0Standby 0x1
+#define bRegulatorPLLStandby 0x2
+#define bRegulator1Standby 0x4
+#define bPLLPowerUp 0x8
+#define bDPLLPowerUp 0x10
+#define bDA10PowerUp 0x20
+#define bAD7PowerUp 0x200
+#define bDA6PowerUp 0x2000
+#define bXtalPowerUp 0x4000
+#define b40MDClkPowerUP 0x8000
+#define bDA6DebugMode 0x20000
+#define bDA6Swing 0x380000
+
+#define bADClkPhase 0x4000000 // Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ
+
+#define b80MClkDelay 0x18000000 // Useless
+#define bAFEWatchDogEnable 0x20000000
+
+#define bXtalCap01 0xc0000000 // Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap
+#define bXtalCap23 0x3
+#define bXtalCap92x 0x0f000000
+#define bXtalCap 0x0f000000
+
+#define bIntDifClkEnable 0x400 // Useless
+#define bExtSigClkEnable 0x800
+#define bBandgapMbiasPowerUp 0x10000
+#define bAD11SHGain 0xc0000
+#define bAD11InputRange 0x700000
+#define bAD11OPCurrent 0x3800000
+#define bIPathLoopback 0x4000000
+#define bQPathLoopback 0x8000000
+#define bAFELoopback 0x10000000
+#define bDA10Swing 0x7e0
+#define bDA10Reverse 0x800
+#define bDAClkSource 0x1000
+#define bAD7InputRange 0x6000
+#define bAD7Gain 0x38000
+#define bAD7OutputCMMode 0x40000
+#define bAD7InputCMMode 0x380000
+#define bAD7Current 0xc00000
+#define bRegulatorAdjust 0x7000000
+#define bAD11PowerUpAtTx 0x1
+#define bDA10PSAtTx 0x10
+#define bAD11PowerUpAtRx 0x100
+#define bDA10PSAtRx 0x1000
+#define bCCKRxAGCFormat 0x200
+#define bPSDFFTSamplepPoint 0xc000
+#define bPSDAverageNum 0x3000
+#define bIQPathControl 0xc00
+#define bPSDFreq 0x3ff
+#define bPSDAntennaPath 0x30
+#define bPSDIQSwitch 0x40
+#define bPSDRxTrigger 0x400000
+#define bPSDTxTrigger 0x80000000
+#define bPSDSineToneScale 0x7f000000
+#define bPSDReport 0xffff
+
+// 3. Page9(0x900)
+#define bOFDMTxSC 0x30000000 // Useless
+#define bCCKTxOn 0x1
+#define bOFDMTxOn 0x2
+#define bDebugPage 0xfff //reset debug page and also HWord, LWord
+#define bDebugItem 0xff //reset debug page and LWord
+#define bAntL 0x10
+#define bAntNonHT 0x100
+#define bAntHT1 0x1000
+#define bAntHT2 0x10000
+#define bAntHT1S1 0x100000
+#define bAntNonHTS1 0x1000000
+
+// 4. PageA(0xA00)
+#define bCCKBBMode 0x3 // Useless
+#define bCCKTxPowerSaving 0x80
+#define bCCKRxPowerSaving 0x40
+
+#define bCCKSideBand 0x10 // Reg 0xa00 rCCK0_System 20/40 switch
+
+#define bCCKScramble 0x8 // Useless
+#define bCCKAntDiversity 0x8000
+#define bCCKCarrierRecovery 0x4000
+#define bCCKTxRate 0x3000
+#define bCCKDCCancel 0x0800
+#define bCCKISICancel 0x0400
+#define bCCKMatchFilter 0x0200
+#define bCCKEqualizer 0x0100
+#define bCCKPreambleDetect 0x800000
+#define bCCKFastFalseCCA 0x400000
+#define bCCKChEstStart 0x300000
+#define bCCKCCACount 0x080000
+#define bCCKcs_lim 0x070000
+#define bCCKBistMode 0x80000000
+#define bCCKCCAMask 0x40000000
+#define bCCKTxDACPhase 0x4
+#define bCCKRxADCPhase 0x20000000 //r_rx_clk
+#define bCCKr_cp_mode0 0x0100
+#define bCCKTxDCOffset 0xf0
+#define bCCKRxDCOffset 0xf
+#define bCCKCCAMode 0xc000
+#define bCCKFalseCS_lim 0x3f00
+#define bCCKCS_ratio 0xc00000
+#define bCCKCorgBit_sel 0x300000
+#define bCCKPD_lim 0x0f0000
+#define bCCKNewCCA 0x80000000
+#define bCCKRxHPofIG 0x8000
+#define bCCKRxIG 0x7f00
+#define bCCKLNAPolarity 0x800000
+#define bCCKRx1stGain 0x7f0000
+#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity
+#define bCCKRxAGCSatLevel 0x1f000000
+#define bCCKRxAGCSatCount 0xe0
+#define bCCKRxRFSettle 0x1f //AGCsamp_dly
+#define bCCKFixedRxAGC 0x8000
+//#define bCCKRxAGCFormat 0x4000 //remove to HSSI register 0x824
+#define bCCKAntennaPolarity 0x2000
+#define bCCKTxFilterType 0x0c00
+#define bCCKRxAGCReportType 0x0300
+#define bCCKRxDAGCEn 0x80000000
+#define bCCKRxDAGCPeriod 0x20000000
+#define bCCKRxDAGCSatLevel 0x1f000000
+#define bCCKTimingRecovery 0x800000
+#define bCCKTxC0 0x3f0000
+#define bCCKTxC1 0x3f000000
+#define bCCKTxC2 0x3f
+#define bCCKTxC3 0x3f00
+#define bCCKTxC4 0x3f0000
+#define bCCKTxC5 0x3f000000
+#define bCCKTxC6 0x3f
+#define bCCKTxC7 0x3f00
+#define bCCKDebugPort 0xff0000
+#define bCCKDACDebug 0x0f000000
+#define bCCKFalseAlarmEnable 0x8000
+#define bCCKFalseAlarmRead 0x4000
+#define bCCKTRSSI 0x7f
+#define bCCKRxAGCReport 0xfe
+#define bCCKRxReport_AntSel 0x80000000
+#define bCCKRxReport_MFOff 0x40000000
+#define bCCKRxRxReport_SQLoss 0x20000000
+#define bCCKRxReport_Pktloss 0x10000000
+#define bCCKRxReport_Lockedbit 0x08000000
+#define bCCKRxReport_RateError 0x04000000
+#define bCCKRxReport_RxRate 0x03000000
+#define bCCKRxFACounterLower 0xff
+#define bCCKRxFACounterUpper 0xff000000
+#define bCCKRxHPAGCStart 0xe000
+#define bCCKRxHPAGCFinal 0x1c00
+#define bCCKRxFalseAlarmEnable 0x8000
+#define bCCKFACounterFreeze 0x4000
+#define bCCKTxPathSel 0x10000000
+#define bCCKDefaultRxPath 0xc000000
+#define bCCKOptionRxPath 0x3000000
+
+// 5. PageC(0xC00)
+#define bNumOfSTF 0x3 // Useless
+#define bShift_L 0xc0
+#define bGI_TH 0xc
+#define bRxPathA 0x1
+#define bRxPathB 0x2
+#define bRxPathC 0x4
+#define bRxPathD 0x8
+#define bTxPathA 0x1
+#define bTxPathB 0x2
+#define bTxPathC 0x4
+#define bTxPathD 0x8
+#define bTRSSIFreq 0x200
+#define bADCBackoff 0x3000
+#define bDFIRBackoff 0xc000
+#define bTRSSILatchPhase 0x10000
+#define bRxIDCOffset 0xff
+#define bRxQDCOffset 0xff00
+#define bRxDFIRMode 0x1800000
+#define bRxDCNFType 0xe000000
+#define bRXIQImb_A 0x3ff
+#define bRXIQImb_B 0xfc00
+#define bRXIQImb_C 0x3f0000
+#define bRXIQImb_D 0xffc00000
+#define bDC_dc_Notch 0x60000
+#define bRxNBINotch 0x1f000000
+#define bPD_TH 0xf
+#define bPD_TH_Opt2 0xc000
+#define bPWED_TH 0x700
+#define bIfMF_Win_L 0x800
+#define bPD_Option 0x1000
+#define bMF_Win_L 0xe000
+#define bBW_Search_L 0x30000
+#define bwin_enh_L 0xc0000
+#define bBW_TH 0x700000
+#define bED_TH2 0x3800000
+#define bBW_option 0x4000000
+#define bRatio_TH 0x18000000
+#define bWindow_L 0xe0000000
+#define bSBD_Option 0x1
+#define bFrame_TH 0x1c
+#define bFS_Option 0x60
+#define bDC_Slope_check 0x80
+#define bFGuard_Counter_DC_L 0xe00
+#define bFrame_Weight_Short 0x7000
+#define bSub_Tune 0xe00000
+#define bFrame_DC_Length 0xe000000
+#define bSBD_start_offset 0x30000000
+#define bFrame_TH_2 0x7
+#define bFrame_GI2_TH 0x38
+#define bGI2_Sync_en 0x40
+#define bSarch_Short_Early 0x300
+#define bSarch_Short_Late 0xc00
+#define bSarch_GI2_Late 0x70000
+#define bCFOAntSum 0x1
+#define bCFOAcc 0x2
+#define bCFOStartOffset 0xc
+#define bCFOLookBack 0x70
+#define bCFOSumWeight 0x80
+#define bDAGCEnable 0x10000
+#define bTXIQImb_A 0x3ff
+#define bTXIQImb_B 0xfc00
+#define bTXIQImb_C 0x3f0000
+#define bTXIQImb_D 0xffc00000
+#define bTxIDCOffset 0xff
+#define bTxQDCOffset 0xff00
+#define bTxDFIRMode 0x10000
+#define bTxPesudoNoiseOn 0x4000000
+#define bTxPesudoNoise_A 0xff
+#define bTxPesudoNoise_B 0xff00
+#define bTxPesudoNoise_C 0xff0000
+#define bTxPesudoNoise_D 0xff000000
+#define bCCADropOption 0x20000
+#define bCCADropThres 0xfff00000
+#define bEDCCA_H 0xf
+#define bEDCCA_L 0xf0
+#define bLambda_ED 0x300
+#define bRxInitialGain 0x7f
+#define bRxAntDivEn 0x80
+#define bRxAGCAddressForLNA 0x7f00
+#define bRxHighPowerFlow 0x8000
+#define bRxAGCFreezeThres 0xc0000
+#define bRxFreezeStep_AGC1 0x300000
+#define bRxFreezeStep_AGC2 0xc00000
+#define bRxFreezeStep_AGC3 0x3000000
+#define bRxFreezeStep_AGC0 0xc000000
+#define bRxRssi_Cmp_En 0x10000000
+#define bRxQuickAGCEn 0x20000000
+#define bRxAGCFreezeThresMode 0x40000000
+#define bRxOverFlowCheckType 0x80000000
+#define bRxAGCShift 0x7f
+#define bTRSW_Tri_Only 0x80
+#define bPowerThres 0x300
+#define bRxAGCEn 0x1
+#define bRxAGCTogetherEn 0x2
+#define bRxAGCMin 0x4
+#define bRxHP_Ini 0x7
+#define bRxHP_TRLNA 0x70
+#define bRxHP_RSSI 0x700
+#define bRxHP_BBP1 0x7000
+#define bRxHP_BBP2 0x70000
+#define bRxHP_BBP3 0x700000
+#define bRSSI_H 0x7f0000 //the threshold for high power
+#define bRSSI_Gen 0x7f000000 //the threshold for ant diversity
+#define bRxSettle_TRSW 0x7
+#define bRxSettle_LNA 0x38
+#define bRxSettle_RSSI 0x1c0
+#define bRxSettle_BBP 0xe00
+#define bRxSettle_RxHP 0x7000
+#define bRxSettle_AntSW_RSSI 0x38000
+#define bRxSettle_AntSW 0xc0000
+#define bRxProcessTime_DAGC 0x300000
+#define bRxSettle_HSSI 0x400000
+#define bRxProcessTime_BBPPW 0x800000
+#define bRxAntennaPowerShift 0x3000000
+#define bRSSITableSelect 0xc000000
+#define bRxHP_Final 0x7000000
+#define bRxHTSettle_BBP 0x7
+#define bRxHTSettle_HSSI 0x8
+#define bRxHTSettle_RxHP 0x70
+#define bRxHTSettle_BBPPW 0x80
+#define bRxHTSettle_Idle 0x300
+#define bRxHTSettle_Reserved 0x1c00
+#define bRxHTRxHPEn 0x8000
+#define bRxHTAGCFreezeThres 0x30000
+#define bRxHTAGCTogetherEn 0x40000
+#define bRxHTAGCMin 0x80000
+#define bRxHTAGCEn 0x100000
+#define bRxHTDAGCEn 0x200000
+#define bRxHTRxHP_BBP 0x1c00000
+#define bRxHTRxHP_Final 0xe0000000
+#define bRxPWRatioTH 0x3
+#define bRxPWRatioEn 0x4
+#define bRxMFHold 0x3800
+#define bRxPD_Delay_TH1 0x38
+#define bRxPD_Delay_TH2 0x1c0
+#define bRxPD_DC_COUNT_MAX 0x600
+//#define bRxMF_Hold 0x3800
+#define bRxPD_Delay_TH 0x8000
+#define bRxProcess_Delay 0xf0000
+#define bRxSearchrange_GI2_Early 0x700000
+#define bRxFrame_Guard_Counter_L 0x3800000
+#define bRxSGI_Guard_L 0xc000000
+#define bRxSGI_Search_L 0x30000000
+#define bRxSGI_TH 0xc0000000
+#define bDFSCnt0 0xff
+#define bDFSCnt1 0xff00
+#define bDFSFlag 0xf0000
+#define bMFWeightSum 0x300000
+#define bMinIdxTH 0x7f000000
+#define bDAFormat 0x40000
+#define bTxChEmuEnable 0x01000000
+#define bTRSWIsolation_A 0x7f
+#define bTRSWIsolation_B 0x7f00
+#define bTRSWIsolation_C 0x7f0000
+#define bTRSWIsolation_D 0x7f000000
+#define bExtLNAGain 0x7c00
+
+// 6. PageE(0xE00)
+#define bSTBCEn 0x4 // Useless
+#define bAntennaMapping 0x10
+#define bNss 0x20
+#define bCFOAntSumD 0x200
+#define bPHYCounterReset 0x8000000
+#define bCFOReportGet 0x4000000
+#define bOFDMContinueTx 0x10000000
+#define bOFDMSingleCarrier 0x20000000
+#define bOFDMSingleTone 0x40000000
+//#define bRxPath1 0x01
+//#define bRxPath2 0x02
+//#define bRxPath3 0x04
+//#define bRxPath4 0x08
+//#define bTxPath1 0x10
+//#define bTxPath2 0x20
+#define bHTDetect 0x100
+#define bCFOEn 0x10000
+#define bCFOValue 0xfff00000
+#define bSigTone_Re 0x3f
+#define bSigTone_Im 0x7f00
+#define bCounter_CCA 0xffff
+#define bCounter_ParityFail 0xffff0000
+#define bCounter_RateIllegal 0xffff
+#define bCounter_CRC8Fail 0xffff0000
+#define bCounter_MCSNoSupport 0xffff
+#define bCounter_FastSync 0xffff
+#define bShortCFO 0xfff
+#define bShortCFOTLength 12 //total
+#define bShortCFOFLength 11 //fraction
+#define bLongCFO 0x7ff
+#define bLongCFOTLength 11
+#define bLongCFOFLength 11
+#define bTailCFO 0x1fff
+#define bTailCFOTLength 13
+#define bTailCFOFLength 12
+#define bmax_en_pwdB 0xffff
+#define bCC_power_dB 0xffff0000
+#define bnoise_pwdB 0xffff
+#define bPowerMeasTLength 10
+#define bPowerMeasFLength 3
+#define bRx_HT_BW 0x1
+#define bRxSC 0x6
+#define bRx_HT 0x8
+#define bNB_intf_det_on 0x1
+#define bIntf_win_len_cfg 0x30
+#define bNB_Intf_TH_cfg 0x1c0
+#define bRFGain 0x3f
+#define bTableSel 0x40
+#define bTRSW 0x80
+#define bRxSNR_A 0xff
+#define bRxSNR_B 0xff00
+#define bRxSNR_C 0xff0000
+#define bRxSNR_D 0xff000000
+#define bSNREVMTLength 8
+#define bSNREVMFLength 1
+#define bCSI1st 0xff
+#define bCSI2nd 0xff00
+#define bRxEVM1st 0xff0000
+#define bRxEVM2nd 0xff000000
+#define bSIGEVM 0xff
+#define bPWDB 0xff00
+#define bSGIEN 0x10000
+
+#define bSFactorQAM1 0xf // Useless
+#define bSFactorQAM2 0xf0
+#define bSFactorQAM3 0xf00
+#define bSFactorQAM4 0xf000
+#define bSFactorQAM5 0xf0000
+#define bSFactorQAM6 0xf0000
+#define bSFactorQAM7 0xf00000
+#define bSFactorQAM8 0xf000000
+#define bSFactorQAM9 0xf0000000
+#define bCSIScheme 0x100000
+
+#define bNoiseLvlTopSet 0x3 // Useless
+#define bChSmooth 0x4
+#define bChSmoothCfg1 0x38
+#define bChSmoothCfg2 0x1c0
+#define bChSmoothCfg3 0xe00
+#define bChSmoothCfg4 0x7000
+#define bMRCMode 0x800000
+#define bTHEVMCfg 0x7000000
+
+#define bLoopFitType 0x1 // Useless
+#define bUpdCFO 0x40
+#define bUpdCFOOffData 0x80
+#define bAdvUpdCFO 0x100
+#define bAdvTimeCtrl 0x800
+#define bUpdClko 0x1000
+#define bFC 0x6000
+#define bTrackingMode 0x8000
+#define bPhCmpEnable 0x10000
+#define bUpdClkoLTF 0x20000
+#define bComChCFO 0x40000
+#define bCSIEstiMode 0x80000
+#define bAdvUpdEqz 0x100000
+#define bUChCfg 0x7000000
+#define bUpdEqz 0x8000000
+
+//Rx Pseduo noise
+#define bRxPesudoNoiseOn 0x20000000 // Useless
+#define bRxPesudoNoise_A 0xff
+#define bRxPesudoNoise_B 0xff00
+#define bRxPesudoNoise_C 0xff0000
+#define bRxPesudoNoise_D 0xff000000
+#define bPesudoNoiseState_A 0xffff
+#define bPesudoNoiseState_B 0xffff0000
+#define bPesudoNoiseState_C 0xffff
+#define bPesudoNoiseState_D 0xffff0000
+
+//7. RF Register
+//Zebra1
+#define bZebra1_HSSIEnable 0x8 // Useless
+#define bZebra1_TRxControl 0xc00
+#define bZebra1_TRxGainSetting 0x07f
+#define bZebra1_RxCorner 0xc00
+#define bZebra1_TxChargePump 0x38
+#define bZebra1_RxChargePump 0x7
+#define bZebra1_ChannelNum 0xf80
+#define bZebra1_TxLPFBW 0x400
+#define bZebra1_RxLPFBW 0x600
+
+//Zebra4
+#define bRTL8256RegModeCtrl1 0x100 // Useless
+#define bRTL8256RegModeCtrl0 0x40
+#define bRTL8256_TxLPFBW 0x18
+#define bRTL8256_RxLPFBW 0x600
+
+//RTL8258
+#define bRTL8258_TxLPFBW 0xc // Useless
+#define bRTL8258_RxLPFBW 0xc00
+#define bRTL8258_RSSILPFBW 0xc0
+
+
+//
+// Other Definition
+//
+
+//byte endable for sb_write
+#define bByte0 0x1 // Useless
+#define bByte1 0x2
+#define bByte2 0x4
+#define bByte3 0x8
+#define bWord0 0x3
+#define bWord1 0xc
+#define bDWord 0xf
+
+//for PutRegsetting & GetRegSetting BitMask
+#define bMaskByte0 0xff // Reg 0xc50 rOFDM0_XAAGCCore~0xC6f
+#define bMaskByte1 0xff00
+#define bMaskByte2 0xff0000
+#define bMaskByte3 0xff000000
+#define bMaskHWord 0xffff0000
+#define bMaskLWord 0x0000ffff
+#define bMaskDWord 0xffffffff
+#define bMaskH3Bytes 0xffffff00
+#define bMask12Bits 0xfff
+#define bMaskH4Bits 0xf0000000
+#define bMaskOFDM_D 0xffc00000
+#define bMaskCCK 0x3f3f3f3f
+
+
+#define bEnable 0x1 // Useless
+#define bDisable 0x0
+
+#define LeftAntenna 0x0 // Useless
+#define RightAntenna 0x1
+
+#define tCheckTxStatus 500 //500ms // Useless
+#define tUpdateRxCounter 100 //100ms
+
+#define rateCCK 0 // Useless
+#define rateOFDM 1
+#define rateHT 2
+
+//define Register-End
+#define bPMAC_End 0x1ff // Useless
+#define bFPGAPHY0_End 0x8ff
+#define bFPGAPHY1_End 0x9ff
+#define bCCKPHY0_End 0xaff
+#define bOFDMPHY0_End 0xcff
+#define bOFDMPHY1_End 0xdff
+
+//define max debug item in each debug page
+//#define bMaxItem_FPGA_PHY0 0x9
+//#define bMaxItem_FPGA_PHY1 0x3
+//#define bMaxItem_PHY_11B 0x16
+//#define bMaxItem_OFDM_PHY0 0x29
+//#define bMaxItem_OFDM_PHY1 0x0
+
+#define bPMACControl 0x0 // Useless
+#define bWMACControl 0x1
+#define bWNICControl 0x2
+
+#define PathA 0x0 // Useless
+#define PathB 0x1
+#define PathC 0x2
+#define PathD 0x3
+
+#endif
OSDN Git Service
