--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __DRV_CONF_H__
+#define __DRV_CONF_H__
+#include "autoconf.h"
+#include "hal_ic_cfg.h"
+
+#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)
+
+#error "Shall be Linux or Windows, but not both!\n"
+
+#endif
+
+//Older Android kernel doesn't has CONFIG_ANDROID defined,
+//add this to force CONFIG_ANDROID defined
+#ifdef CONFIG_PLATFORM_ANDROID
+#ifndef CONFIG_ANDROID
+#define CONFIG_ANDROID
+#endif
+#endif
+
+#ifdef CONFIG_ANDROID
+//Some Android build will restart the UI while non-printable ascii is passed
+//between java and c/c++ layer (JNI). We force CONFIG_VALIDATE_SSID
+//for Android here. If you are sure there is no risk on your system about this,
+//mask this macro define to support non-printable ascii ssid.
+//#define CONFIG_VALIDATE_SSID
+
+//Android expect dbm as the rx signal strength unit
+#define CONFIG_SIGNAL_DISPLAY_DBM
+#endif
+
+/*
+#if defined(CONFIG_HAS_EARLYSUSPEND) && defined (CONFIG_RESUME_IN_WORKQUEUE)
+ #warning "You have CONFIG_HAS_EARLYSUSPEND enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
+ #undef CONFIG_RESUME_IN_WORKQUEUE
+#endif
+
+#if defined(CONFIG_ANDROID_POWER) && defined (CONFIG_RESUME_IN_WORKQUEUE)
+ #warning "You have CONFIG_ANDROID_POWER enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
+ #undef CONFIG_RESUME_IN_WORKQUEUE
+#endif
+*/
+
+#ifdef CONFIG_RESUME_IN_WORKQUEUE //this can be removed, because there is no case for this...
+ #if !defined( CONFIG_WAKELOCK) && !defined(CONFIG_ANDROID_POWER)
+ #error "enable CONFIG_RESUME_IN_WORKQUEUE without CONFIG_WAKELOCK or CONFIG_ANDROID_POWER will suffer from the danger of wifi's unfunctionality..."
+ #error "If you still want to enable CONFIG_RESUME_IN_WORKQUEUE in this case, mask this preprossor checking and GOOD LUCK..."
+ #endif
+#endif
+
+//About USB VENDOR REQ
+#if defined(CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX)
+ #warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC automatically"
+ #define CONFIG_USB_VENDOR_REQ_MUTEX
+#endif
+#if defined(CONFIG_VENDOR_REQ_RETRY) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX)
+ #warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_VENDOR_REQ_RETRY automatically"
+ #define CONFIG_USB_VENDOR_REQ_MUTEX
+#endif
+
+#if !defined(CONFIG_AP_MODE) && defined(CONFIG_DFS_MASTER)
+ #warning "undef CONFIG_DFS_MASTER because CONFIG_AP_MODE is not defined"
+ #undef CONFIG_DFS_MASTER
+#endif
+
+#define DYNAMIC_CAMID_ALLOC
+
+#define RTW_SCAN_SPARSE_MIRACAST 1
+#define RTW_SCAN_SPARSE_BG 0
+
+#ifndef CONFIG_RTW_HIQ_FILTER
+ #define CONFIG_RTW_HIQ_FILTER 1
+#endif
+
+#ifndef CONFIG_RTW_ADAPTIVITY_EN
+ #define CONFIG_RTW_ADAPTIVITY_EN 0
+#endif
+
+#ifndef CONFIG_RTW_ADAPTIVITY_MODE
+ #define CONFIG_RTW_ADAPTIVITY_MODE 0
+#endif
+
+#ifndef CONFIG_RTW_ADAPTIVITY_DML
+ #define CONFIG_RTW_ADAPTIVITY_DML 0
+#endif
+
+#ifndef CONFIG_RTW_ADAPTIVITY_DC_BACKOFF
+ #define CONFIG_RTW_ADAPTIVITY_DC_BACKOFF 2
+#endif
+
+#ifndef CONFIG_RTW_ADAPTIVITY_TH_L2H_INI
+ #define CONFIG_RTW_ADAPTIVITY_TH_L2H_INI 0
+#endif
+
+#ifndef CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF
+ #define CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF 0
+#endif
+
+#ifndef CONFIG_RTW_AMPLIFIER_TYPE_2G
+ #define CONFIG_RTW_AMPLIFIER_TYPE_2G 0
+#endif
+
+#ifndef CONFIG_RTW_AMPLIFIER_TYPE_5G
+ #define CONFIG_RTW_AMPLIFIER_TYPE_5G 0
+#endif
+
+#ifndef CONFIG_RTW_RFE_TYPE
+ #define CONFIG_RTW_RFE_TYPE 64
+#endif
+
+#ifndef CONFIG_RTW_GLNA_TYPE
+ #define CONFIG_RTW_GLNA_TYPE 0
+#endif
+
+#ifndef CONFIG_RTW_PLL_REF_CLK_SEL
+ #define CONFIG_RTW_PLL_REF_CLK_SEL 0x0F
+#endif
+
+#define MACID_NUM_SW_LIMIT 32
+#define SEC_CAM_ENT_NUM_SW_LIMIT 32
+
+#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8814A)
+ #define CONFIG_IEEE80211_BAND_5GHZ
+#endif
+
+#ifndef RTW_DEF_MODULE_REGULATORY_CERT
+ #define RTW_DEF_MODULE_REGULATORY_CERT 0
+#endif
+
+#if RTW_DEF_MODULE_REGULATORY_CERT
+ /* force enable TX power by rate and TX power limit */
+ #ifndef CONFIG_CALIBRATE_TX_POWER_BY_REGULATORY
+ #define CONFIG_CALIBRATE_TX_POWER_BY_REGULATORY
+ #endif
+#endif
+
+/*
+ Mark CONFIG_DEAUTH_BEFORE_CONNECT by Arvin 2015/07/20
+ If the failure of Wi-Fi connection is due to some irregular disconnection behavior (like unplug dongle,
+ power down etc.) in last time, we can unmark this flag to avoid some unpredictable response from AP.
+*/
+/*#define CONFIG_DEAUTH_BEFORE_CONNECT */
+
+/*#define CONFIG_WEXT_DONT_JOIN_BYSSID */
+//#include <rtl871x_byteorder.h>
+
+
+/*#define CONFIG_DOSCAN_IN_BUSYTRAFFIC */
+
+#endif // __DRV_CONF_H__
OSDN Git Service
