--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HAL_COMMON_LED_H_
+#define __HAL_COMMON_LED_H_
+
+
+#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
+
+//================================================================================
+// LED Behavior Constant.
+//================================================================================
+// Default LED behavior.
+//
+#define LED_BLINK_NORMAL_INTERVAL 100
+#define LED_BLINK_SLOWLY_INTERVAL 200
+#define LED_BLINK_LONG_INTERVAL 400
+#define LED_INITIAL_INTERVAL 1800
+
+// LED Customerization
+
+//NETTRONIX
+#define LED_BLINK_NORMAL_INTERVAL_NETTRONIX 100
+#define LED_BLINK_SLOWLY_INTERVAL_NETTRONIX 2000
+
+//PORNET
+#define LED_BLINK_SLOWLY_INTERVAL_PORNET 1000
+#define LED_BLINK_NORMAL_INTERVAL_PORNET 100
+#define LED_BLINK_FAST_INTERVAL_BITLAND 30
+
+//AzWave.
+#define LED_CM2_BLINK_ON_INTERVAL 250
+#define LED_CM2_BLINK_OFF_INTERVAL 4750
+#define LED_CM8_BLINK_OFF_INTERVAL 3750 //for QMI
+
+//RunTop
+#define LED_RunTop_BLINK_INTERVAL 300
+
+//ALPHA
+#define LED_BLINK_NO_LINK_INTERVAL_ALPHA 1000
+#define LED_BLINK_NO_LINK_INTERVAL_ALPHA_500MS 500 //add by ylb 20121012 for customer led for alpha
+#define LED_BLINK_LINK_INTERVAL_ALPHA 500 //500
+#define LED_BLINK_SCAN_INTERVAL_ALPHA 180 //150
+#define LED_BLINK_FASTER_INTERVAL_ALPHA 50
+#define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA 5000
+
+// 111122 by hpfan: Customized for Xavi
+#define LED_CM11_BLINK_INTERVAL 300
+#define LED_CM11_LINK_ON_INTERVEL 3000
+
+//Netgear
+#define LED_BLINK_LINK_INTERVAL_NETGEAR 500
+#define LED_BLINK_LINK_SLOWLY_INTERVAL_NETGEAR 1000
+
+#define LED_WPS_BLINK_OFF_INTERVAL_NETGEAR 100
+#define LED_WPS_BLINK_ON_INTERVAL_NETGEAR 500
+
+//Belkin AC950
+#define LED_BLINK_LINK_INTERVAL_ON_BELKIN 200
+#define LED_BLINK_LINK_INTERVAL_OFF_BELKIN 100
+#define LED_BLINK_ERROR_INTERVAL_BELKIN 100
+
+//by chiyokolin for Azurewave
+#define LED_CM12_BLINK_INTERVAL_5Mbps 160
+#define LED_CM12_BLINK_INTERVAL_10Mbps 80
+#define LED_CM12_BLINK_INTERVAL_20Mbps 50
+#define LED_CM12_BLINK_INTERVAL_40Mbps 40
+#define LED_CM12_BLINK_INTERVAL_80Mbps 30
+#define LED_CM12_BLINK_INTERVAL_MAXMbps 25
+
+//Dlink
+#define LED_BLINK_NO_LINK_INTERVAL 1000
+#define LED_BLINK_LINK_IDEL_INTERVAL 100
+
+#define LED_BLINK_SCAN_ON_INTERVAL 30
+#define LED_BLINK_SCAN_OFF_INTERVAL 300
+
+#define LED_WPS_BLINK_ON_INTERVAL_DLINK 30
+#define LED_WPS_BLINK_OFF_INTERVAL_DLINK 300
+#define LED_WPS_BLINK_LINKED_ON_INTERVAL_DLINK 5000
+
+//================================================================================
+// LED object.
+//================================================================================
+
+typedef enum _LED_CTL_MODE{
+ LED_CTL_POWER_ON = 1,
+ LED_CTL_LINK = 2,
+ LED_CTL_NO_LINK = 3,
+ LED_CTL_TX = 4,
+ LED_CTL_RX = 5,
+ LED_CTL_SITE_SURVEY = 6,
+ LED_CTL_POWER_OFF = 7,
+ LED_CTL_START_TO_LINK = 8,
+ LED_CTL_START_WPS = 9,
+ LED_CTL_STOP_WPS = 10,
+ LED_CTL_START_WPS_BOTTON = 11, //added for runtop
+ LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA
+ LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN
+ LED_CTL_CONNECTION_NO_TRANSFER = 14,
+}LED_CTL_MODE;
+
+typedef enum _LED_STATE{
+ LED_UNKNOWN = 0,
+ RTW_LED_ON = 1,
+ RTW_LED_OFF = 2,
+ LED_BLINK_NORMAL = 3,
+ LED_BLINK_SLOWLY = 4,
+ LED_BLINK_POWER_ON = 5,
+ LED_BLINK_SCAN = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning.
+ LED_BLINK_NO_LINK = 7, // LED is blinking during no link state.
+ LED_BLINK_StartToBlink = 8, // Customzied for Sercomm Printer Server case
+ LED_BLINK_TXRX = 9,
+ LED_BLINK_WPS = 10, // LED is blinkg during WPS communication
+ LED_BLINK_WPS_STOP = 11, //for ALPHA
+ LED_BLINK_WPS_STOP_OVERLAP = 12, //for BELKIN
+ LED_BLINK_RUNTOP = 13, // Customized for RunTop
+ LED_BLINK_CAMEO = 14,
+ LED_BLINK_XAVI = 15,
+ LED_BLINK_ALWAYS_ON = 16,
+ LED_BLINK_LINK_IN_PROCESS = 17, //Customized for Belkin AC950
+ LED_BLINK_AUTH_ERROR = 18, //Customized for Belkin AC950
+ LED_BLINK_Azurewave_5Mbps = 19,
+ LED_BLINK_Azurewave_10Mbps = 20,
+ LED_BLINK_Azurewave_20Mbps = 21,
+ LED_BLINK_Azurewave_40Mbps = 22,
+ LED_BLINK_Azurewave_80Mbps = 23,
+ LED_BLINK_Azurewave_MAXMbps = 24,
+ LED_BLINK_LINK_IDEL = 25,
+ LED_BLINK_WPS_LINKED = 26,
+}LED_STATE;
+
+typedef enum _LED_PIN{
+ LED_PIN_GPIO0,
+ LED_PIN_LED0,
+ LED_PIN_LED1,
+ LED_PIN_LED2
+}LED_PIN;
+
+
+//================================================================================
+// PCIE LED Definition.
+//================================================================================
+#ifdef CONFIG_PCI_HCI
+typedef enum _LED_STRATEGY_PCIE{
+ SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
+ SW_LED_MODE1, // SW control for PCI Express
+ SW_LED_MODE2, // SW control for Cameo.
+ SW_LED_MODE3, // SW contorl for RunTop.
+ SW_LED_MODE4, // SW control for Netcore
+ SW_LED_MODE5, //added by vivi, for led new mode, DLINK
+ SW_LED_MODE6, //added by vivi, for led new mode, PRONET
+ SW_LED_MODE7, //added by chiyokolin, for Lenovo, PCI Express Minicard Spec Rev.1.2 spec
+ SW_LED_MODE8, //added by chiyokolin, for QMI
+ SW_LED_MODE9, //added by chiyokolin, for BITLAND-LENOVO, PCI Express Minicard Spec Rev.1.1
+ SW_LED_MODE10, //added by chiyokolin, for Edimax-ASUS
+ SW_LED_MODE11, //added by hpfan, for Xavi
+ SW_LED_MODE12, //added by chiyokolin, for Azurewave
+ HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
+}LED_STRATEGY_PCIE, *PLED_STRATEGY_PCIE;
+
+typedef struct _LED_PCIE{
+ PADAPTER padapter;
+
+ LED_PIN LedPin; // Identify how to implement this SW led.
+
+ LED_STATE CurrLedState; // Current LED state.
+ BOOLEAN bLedOn; // TRUE if LED is ON, FALSE if LED is OFF.
+
+ BOOLEAN bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
+ BOOLEAN bLedWPSBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
+
+ BOOLEAN bLedSlowBlinkInProgress;//added by vivi, for led new mode
+ u32 BlinkTimes; // Number of times to toggle led state for blinking.
+ LED_STATE BlinkingLedState; // Next state for blinking, either LED_ON or LED_OFF are.
+
+ _timer BlinkTimer; // Timer object for led blinking.
+} LED_PCIE, *PLED_PCIE;
+
+typedef struct _LED_PCIE LED_DATA, *PLED_DATA;
+typedef enum _LED_STRATEGY_PCIE LED_STRATEGY, *PLED_STRATEGY;
+
+VOID
+LedControlPCIE(
+ IN PADAPTER Adapter,
+ IN LED_CTL_MODE LedAction
+ );
+
+VOID
+gen_RefreshLedState(
+ IN PADAPTER Adapter);
+
+//================================================================================
+// USB LED Definition.
+//================================================================================
+#elif defined(CONFIG_USB_HCI)
+
+#define IS_LED_WPS_BLINKING(_LED_USB) (((PLED_USB)_LED_USB)->CurrLedState==LED_BLINK_WPS \
+ || ((PLED_USB)_LED_USB)->CurrLedState==LED_BLINK_WPS_STOP \
+ || ((PLED_USB)_LED_USB)->bLedWPSBlinkInProgress)
+
+#define IS_LED_BLINKING(_LED_USB) (((PLED_USB)_LED_USB)->bLedWPSBlinkInProgress \
+ ||((PLED_USB)_LED_USB)->bLedScanBlinkInProgress)
+
+
+typedef enum _LED_STRATEGY_USB{
+ SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
+ SW_LED_MODE1, // 2 LEDs, through LED0 and LED1. For ALPHA.
+ SW_LED_MODE2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard.
+ SW_LED_MODE3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case.
+ SW_LED_MODE4, //for Edimax / Belkin
+ SW_LED_MODE5, //for Sercomm / Belkin
+ SW_LED_MODE6, //for 88CU minicard, porting from ce SW_LED_MODE7
+ SW_LED_MODE7, //for Netgear special requirement
+ SW_LED_MODE8, //for LC
+ SW_LED_MODE9, //for Belkin AC950
+ SW_LED_MODE10, //for Netgear A6200V2
+ SW_LED_MODE11, //for Edimax / ASUS
+ SW_LED_MODE12, //for WNC/NEC
+ SW_LED_MODE13, //for Netgear A6100, 8811Au
+ SW_LED_MODE14, //for Buffalo, DNI, 8811Au
+ SW_LED_MODE15, //for DLINK, 8811Au/8812AU
+ HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.)
+}LED_STRATEGY_USB, *PLED_STRATEGY_USB;
+
+
+typedef struct _LED_USB{
+ PADAPTER padapter;
+
+ LED_PIN LedPin; // Identify how to implement this SW led.
+
+ LED_STATE CurrLedState; // Current LED state.
+ BOOLEAN bLedOn; // TRUE if LED is ON, FALSE if LED is OFF.
+
+ BOOLEAN bSWLedCtrl;
+
+ BOOLEAN bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
+ // ALPHA, added by chiyoko, 20090106
+ BOOLEAN bLedNoLinkBlinkInProgress;
+ BOOLEAN bLedLinkBlinkInProgress;
+ BOOLEAN bLedStartToLinkBlinkInProgress;
+ BOOLEAN bLedScanBlinkInProgress;
+ BOOLEAN bLedWPSBlinkInProgress;
+
+ u32 BlinkTimes; // Number of times to toggle led state for blinking.
+ u8 BlinkCounter; //Added for turn off overlap led after blinking a while, by page, 20120821
+ LED_STATE BlinkingLedState; // Next state for blinking, either LED_ON or LED_OFF are.
+
+ _timer BlinkTimer; // Timer object for led blinking.
+
+ _workitem BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED.'
+ ATOMIC_T bCancelWorkItem; //check if WorkItem is cancelled
+} LED_USB, *PLED_USB;
+
+typedef struct _LED_USB LED_DATA, *PLED_DATA;
+typedef enum _LED_STRATEGY_USB LED_STRATEGY, *PLED_STRATEGY;
+
+VOID
+LedControlUSB(
+ IN PADAPTER Adapter,
+ IN LED_CTL_MODE LedAction
+ );
+
+
+//================================================================================
+// SDIO LED Definition.
+//================================================================================
+#elif defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
+
+#define IS_LED_WPS_BLINKING(_LED_SDIO) (((PLED_SDIO)_LED_SDIO)->CurrLedState==LED_BLINK_WPS \
+ || ((PLED_SDIO)_LED_SDIO)->CurrLedState==LED_BLINK_WPS_STOP \
+ || ((PLED_SDIO)_LED_SDIO)->bLedWPSBlinkInProgress)
+
+#define IS_LED_BLINKING(_LED_SDIO) (((PLED_SDIO)_LED_SDIO)->bLedWPSBlinkInProgress \
+ ||((PLED_SDIO)_LED_SDIO)->bLedScanBlinkInProgress)
+
+
+typedef enum _LED_STRATEGY_SDIO{
+ SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
+ SW_LED_MODE1, // 2 LEDs, through LED0 and LED1. For ALPHA.
+ SW_LED_MODE2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard.
+ SW_LED_MODE3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case.
+ SW_LED_MODE4, //for Edimax / Belkin
+ SW_LED_MODE5, //for Sercomm / Belkin
+ SW_LED_MODE6, //for 88CU minicard, porting from ce SW_LED_MODE7
+ HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.)
+}LED_STRATEGY_SDIO, *PLED_STRATEGY_SDIO;
+
+typedef struct _LED_SDIO{
+ PADAPTER padapter;
+
+ LED_PIN LedPin; // Identify how to implement this SW led.
+
+ LED_STATE CurrLedState; // Current LED state.
+ BOOLEAN bLedOn; // TRUE if LED is ON, FALSE if LED is OFF.
+
+ BOOLEAN bSWLedCtrl;
+
+ BOOLEAN bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
+ // ALPHA, added by chiyoko, 20090106
+ BOOLEAN bLedNoLinkBlinkInProgress;
+ BOOLEAN bLedLinkBlinkInProgress;
+ BOOLEAN bLedStartToLinkBlinkInProgress;
+ BOOLEAN bLedScanBlinkInProgress;
+ BOOLEAN bLedWPSBlinkInProgress;
+
+ u32 BlinkTimes; // Number of times to toggle led state for blinking.
+ LED_STATE BlinkingLedState; // Next state for blinking, either LED_ON or LED_OFF are.
+
+ _timer BlinkTimer; // Timer object for led blinking.
+
+ _workitem BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED.
+} LED_SDIO, *PLED_SDIO;
+
+typedef struct _LED_SDIO LED_DATA, *PLED_DATA;
+typedef enum _LED_STRATEGY_SDIO LED_STRATEGY, *PLED_STRATEGY;
+
+VOID
+LedControlSDIO(
+ IN PADAPTER Adapter,
+ IN LED_CTL_MODE LedAction
+ );
+
+#endif
+
+struct led_priv{
+ /* add for led controll */
+ LED_DATA SwLed0;
+ LED_DATA SwLed1;
+ LED_DATA SwLed2;
+ LED_STRATEGY LedStrategy;
+ u8 bRegUseLed;
+ void (*LedControlHandler)(_adapter *padapter, LED_CTL_MODE LedAction);
+ void (*SwLedOn)(_adapter *padapter, PLED_DATA pLed);
+ void (*SwLedOff)(_adapter *padapter, PLED_DATA pLed);
+ /* add for led controll */
+};
+
+#ifdef CONFIG_SW_LED
+#define rtw_led_control(adapter, LedAction) \
+ do { \
+ if((adapter)->ledpriv.LedControlHandler) \
+ (adapter)->ledpriv.LedControlHandler((adapter), (LedAction)); \
+ } while(0)
+#else //CONFIG_SW_LED
+#define rtw_led_control(adapter, LedAction)
+#endif //CONFIG_SW_LED
+
+#define SwLedOn(adapter, pLed) \
+ do { \
+ if((adapter)->ledpriv.SwLedOn) \
+ (adapter)->ledpriv.SwLedOn((adapter), (pLed)); \
+ } while(0)
+
+#define SwLedOff(adapter, pLed) \
+ do { \
+ if((adapter)->ledpriv.SwLedOff) \
+ (adapter)->ledpriv.SwLedOff((adapter), (pLed)); \
+ } while(0)
+
+void BlinkTimerCallback(void *data);
+void BlinkWorkItemCallback(_workitem *work);
+
+void ResetLedStatus(PLED_DATA pLed);
+
+void
+InitLed(
+ _adapter *padapter,
+ PLED_DATA pLed,
+ LED_PIN LedPin
+ );
+
+void
+DeInitLed(
+ PLED_DATA pLed
+ );
+
+//hal...
+extern void BlinkHandler(PLED_DATA pLed);
+
+#endif //__RTW_LED_H_
OSDN Git Service
