--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2017 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ *****************************************************************************/
+#ifndef __HAL_COM_PHYCFG_H__
+#define __HAL_COM_PHYCFG_H__
+
+#define PathA 0x0 /* Useless */
+#define PathB 0x1
+#define PathC 0x2
+#define PathD 0x3
+
+typedef enum _RF_TX_NUM {
+ RF_1TX = 0,
+ RF_2TX,
+ RF_3TX,
+ RF_4TX,
+ RF_MAX_TX_NUM,
+ RF_TX_NUM_NONIMPLEMENT,
+} RF_TX_NUM;
+
+/*------------------------------Define structure----------------------------*/
+typedef struct _BB_REGISTER_DEFINITION {
+ u32 rfintfs; /* set software control: */
+ /* 0x870~0x877[8 bytes] */
+
+ u32 rfintfo; /* output data: */
+ /* 0x860~0x86f [16 bytes] */
+
+ u32 rfintfe; /* output enable: */
+ /* 0x860~0x86f [16 bytes] */
+
+ u32 rf3wireOffset; /* LSSI data: */
+ /* 0x840~0x84f [16 bytes] */
+
+ u32 rfHSSIPara2; /* wire parameter control2 : */
+ /* 0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes] */
+
+ u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */
+ /* 0x8a0~0x8af [16 bytes] */
+
+ u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for Path A and B */
+
+} BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
+
+
+/* ---------------------------------------------------------------------- */
+u8
+PHY_GetTxPowerByRateBase(
+ IN PADAPTER Adapter,
+ IN u8 Band,
+ IN u8 RfPath,
+ IN RATE_SECTION RateSection
+);
+
+VOID
+PHY_GetRateValuesOfTxPowerByRate(
+ IN PADAPTER pAdapter,
+ IN u32 RegAddr,
+ IN u32 BitMask,
+ IN u32 Value,
+ OUT u8 *Rate,
+ OUT s8 *PwrByRateVal,
+ OUT u8 *RateNum
+);
+
+u8
+PHY_GetRateIndexOfTxPowerByRate(
+ IN u8 Rate
+);
+
+VOID
+phy_set_tx_power_index_by_rate_section(
+ IN PADAPTER pAdapter,
+ IN enum rf_path RFPath,
+ IN u8 Channel,
+ IN u8 RateSection
+);
+
+s8
+_PHY_GetTxPowerByRate(
+ IN PADAPTER pAdapter,
+ IN u8 Band,
+ IN enum rf_path RFPath,
+ IN u8 RateIndex
+);
+
+s8
+PHY_GetTxPowerByRate(
+ IN PADAPTER pAdapter,
+ IN u8 Band,
+ IN enum rf_path RFPath,
+ IN u8 RateIndex
+);
+
+VOID
+PHY_SetTxPowerByRate(
+ IN PADAPTER pAdapter,
+ IN u8 Band,
+ IN enum rf_path RFPath,
+ IN u8 Rate,
+ IN s8 Value
+);
+
+VOID
+phy_set_tx_power_level_by_path(
+ IN PADAPTER Adapter,
+ IN u8 channel,
+ IN u8 path
+);
+
+VOID
+PHY_SetTxPowerIndexByRateArray(
+ IN PADAPTER pAdapter,
+ IN enum rf_path RFPath,
+ IN enum channel_width BandWidth,
+ IN u8 Channel,
+ IN u8 *Rates,
+ IN u8 RateArraySize
+);
+
+VOID
+PHY_InitTxPowerByRate(
+ IN PADAPTER pAdapter
+);
+
+VOID
+phy_store_tx_power_by_rate(
+ IN PADAPTER pAdapter,
+ IN u32 Band,
+ IN u32 RfPath,
+ IN u32 TxNum,
+ IN u32 RegAddr,
+ IN u32 BitMask,
+ IN u32 Data
+);
+
+VOID
+PHY_TxPowerByRateConfiguration(
+ IN PADAPTER pAdapter
+);
+
+u8
+PHY_GetTxPowerIndexBase(
+ IN PADAPTER pAdapter,
+ IN enum rf_path RFPath,
+ IN u8 Rate,
+ u8 ntx_idx,
+ IN enum channel_width BandWidth,
+ IN u8 Channel,
+ OUT PBOOLEAN bIn24G
+);
+
+#ifdef CONFIG_TXPWR_LIMIT
+s8 phy_get_txpwr_lmt_abs(_adapter *adapter
+ , const char *regd_name
+ , BAND_TYPE band, enum channel_width bw
+ , u8 tlrs, u8 ntx_idx, u8 cch, u8 lock
+);
+
+s8 phy_get_txpwr_lmt(_adapter *adapter
+ , const char *regd_name
+ , BAND_TYPE band, enum channel_width bw
+ , u8 rfpath, u8 rs, u8 ntx_idx, u8 cch, u8 lock
+);
+
+s8 PHY_GetTxPowerLimit(_adapter *adapter
+ , const char *regd_name
+ , BAND_TYPE band, enum channel_width bw
+ , u8 rfpath, u8 rate, u8 ntx_idx, u8 cch
+);
+#else
+#define phy_get_txpwr_lmt_abs(adapter, regd_name, band, bw, tlrs, ntx_idx, cch, lock) (GET_HAL_SPEC(adapter)->txgi_max)
+#define phy_get_txpwr_lmt(adapter, regd_name, band, bw, rfpath, rs, ntx_idx, cch, lock) (GET_HAL_SPEC(adapter)->txgi_max)
+#define PHY_GetTxPowerLimit(adapter, regd_name, band, bw, rfpath, rate, ntx_idx, cch) (GET_HAL_SPEC(adapter)->txgi_max)
+#endif /* CONFIG_TXPWR_LIMIT */
+
+s8
+PHY_GetTxPowerTrackingOffset(
+ PADAPTER pAdapter,
+ enum rf_path RFPath,
+ u8 Rate
+);
+
+struct txpwr_idx_comp {
+ u8 ntx_idx;
+ u8 base;
+ s8 by_rate;
+ s8 limit;
+ s8 tpt;
+ s8 ebias;
+};
+
+u8
+phy_get_tx_power_index(
+ IN PADAPTER pAdapter,
+ IN enum rf_path RFPath,
+ IN u8 Rate,
+ IN enum channel_width BandWidth,
+ IN u8 Channel
+);
+
+VOID
+PHY_SetTxPowerIndex(
+ IN PADAPTER pAdapter,
+ IN u32 PowerIndex,
+ IN enum rf_path RFPath,
+ IN u8 Rate
+);
+
+void dump_tx_power_idx_title(void *sel, _adapter *adapter);
+void dump_tx_power_idx_by_path_rs(void *sel, _adapter *adapter, u8 rfpath, u8 rs);
+void dump_tx_power_idx(void *sel, _adapter *adapter);
+
+bool phy_is_tx_power_limit_needed(_adapter *adapter);
+bool phy_is_tx_power_by_rate_needed(_adapter *adapter);
+int phy_load_tx_power_by_rate(_adapter *adapter, u8 chk_file);
+#ifdef CONFIG_TXPWR_LIMIT
+int phy_load_tx_power_limit(_adapter *adapter, u8 chk_file);
+#endif
+void phy_load_tx_power_ext_info(_adapter *adapter, u8 chk_file);
+void phy_reload_tx_power_ext_info(_adapter *adapter);
+void phy_reload_default_tx_power_ext_info(_adapter *adapter);
+
+const struct map_t *hal_pg_txpwr_def_info(_adapter *adapter);
+
+#ifdef CONFIG_EFUSE_CONFIG_FILE
+int check_phy_efuse_tx_power_info_valid(_adapter *adapter);
+#endif
+
+void dump_hal_txpwr_info_2g(void *sel, _adapter *adapter, u8 rfpath_num, u8 max_tx_cnt);
+void dump_hal_txpwr_info_5g(void *sel, _adapter *adapter, u8 rfpath_num, u8 max_tx_cnt);
+
+void hal_load_txpwr_info(
+ _adapter *adapter,
+ TxPowerInfo24G *pwr_info_2g,
+ TxPowerInfo5G *pwr_info_5g,
+ u8 *pg_data
+);
+
+void dump_tx_power_ext_info(void *sel, _adapter *adapter);
+void dump_target_tx_power(void *sel, _adapter *adapter);
+void dump_tx_power_by_rate(void *sel, _adapter *adapter);
+
+int rtw_get_phy_file_path(_adapter *adapter, const char *file_name);
+
+#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
+#define MAC_FILE_FW_NIC "FW_NIC.bin"
+#define MAC_FILE_FW_WW_IMG "FW_WoWLAN.bin"
+#define PHY_FILE_MAC_REG "MAC_REG.txt"
+
+#define PHY_FILE_AGC_TAB "AGC_TAB.txt"
+#define PHY_FILE_PHY_REG "PHY_REG.txt"
+#define PHY_FILE_PHY_REG_MP "PHY_REG_MP.txt"
+#define PHY_FILE_PHY_REG_PG "PHY_REG_PG.txt"
+
+#define PHY_FILE_RADIO_A "RadioA.txt"
+#define PHY_FILE_RADIO_B "RadioB.txt"
+#define PHY_FILE_RADIO_C "RadioC.txt"
+#define PHY_FILE_RADIO_D "RadioD.txt"
+#define PHY_FILE_TXPWR_TRACK "TxPowerTrack.txt"
+#define PHY_FILE_TXPWR_LMT "TXPWR_LMT.txt"
+
+#define PHY_FILE_WIFI_ANT_ISOLATION "wifi_ant_isolation.txt"
+
+#define MAX_PARA_FILE_BUF_LEN 25600
+
+#define LOAD_MAC_PARA_FILE BIT0
+#define LOAD_BB_PARA_FILE BIT1
+#define LOAD_BB_PG_PARA_FILE BIT2
+#define LOAD_BB_MP_PARA_FILE BIT3
+#define LOAD_RF_PARA_FILE BIT4
+#define LOAD_RF_TXPWR_TRACK_PARA_FILE BIT5
+#define LOAD_RF_TXPWR_LMT_PARA_FILE BIT6
+
+int phy_ConfigMACWithParaFile(IN PADAPTER Adapter, IN char *pFileName);
+int phy_ConfigBBWithParaFile(IN PADAPTER Adapter, IN char *pFileName, IN u32 ConfigType);
+int phy_ConfigBBWithPgParaFile(IN PADAPTER Adapter, IN const char *pFileName);
+int phy_ConfigBBWithMpParaFile(IN PADAPTER Adapter, IN char *pFileName);
+int PHY_ConfigRFWithParaFile(IN PADAPTER Adapter, IN char *pFileName, IN enum rf_path eRFPath);
+int PHY_ConfigRFWithTxPwrTrackParaFile(IN PADAPTER Adapter, IN char *pFileName);
+#ifdef CONFIG_TXPWR_LIMIT
+int PHY_ConfigRFWithPowerLimitTableParaFile(IN PADAPTER Adapter, IN const char *pFileName);
+#endif
+void phy_free_filebuf_mask(_adapter *padapter, u8 mask);
+void phy_free_filebuf(_adapter *padapter);
+#endif /* CONFIG_LOAD_PHY_PARA_FROM_FILE */
+u8 phy_check_under_survey_ch(_adapter *adapter);
+#endif /* __HAL_COMMON_H__ */
OSDN Git Service
