*** If you want to know full changes, please read 000_gitlog.txt and history.txt. ***
+* SNAPSHOT Aug 16, 2019
+ * Upstream 2019-04-30.
+ * This is point release, still exists some issues (i.e.EMM386(NEC/PC98) and FreeBSD(98) don't work) for PC-9801 and PC-Engine and some VMs, will fix them.
+ * [UI/Qt] DEBUGGER: Add history for debugger command line.
+ * [UI/Qt] DEBUGGER: Add auto-completion for command-line.
+ * [VM/DEVICE] Use __FASTCALL with interfaces, read_*() ,write_*(), fetch_op() and some functions.Make this faster emulation (i.e.PC-9801RA and EMM386 under FreeDOS).
+ * [VM/PC9801] Separate EGC functions.
+ * [VM/PC9801] Add V30@8.0MHz with some I286/I386 machines.
+ * [VM/PC9801] Check differnt of system work area (0000:0400-0000:05FF) both mame(pc9801rs) and emupc9801ra .
+ * [VM/PC9801] Add "UPPER_I386" flag for detect using later than HAS_I386.
+ * [VM/PC9801] CPUREG: (Maybe) improve changing cpu sequence around I/O 00F0h.
+ * [VM/PC9801] CPUREG: Redirect interrupt signal via CPUREG:: .VMs with V30 sub CPU (i.e.PC9801RA) work with V30.
+ * [VM/PC9801] Fix wrong initialize SYS_PORT_B.
+ * [VM/PC9801] Fix wrong initialize memory switch.
+ * [VM/PC9801] Add DIPSWITCH object.
+ * [VM/PC9801] Fix different value at [0000:0501].
+ * [VM/PC9801] MEMBUS: Split update_bios() to functions.
+ * [VM/FP1100] Fix lacking some key symbols.Thanks to https://matsuri.5ch.net/test/read.cgi/i4004/1526806551/540 .
+ * [VM/AY_3_891X] Fix not supported defines, replace flags.
+ * [VM/AY_3_891X] Add feature ; dump/set register via debugger.
+ * [VM/YM2151] Add feature ; dump/set register via debugger.
+ * [VM/YM2203] Add feature ; dump/set register via debugger.
+ * [VM/SN74689AN] Add feature ; dump/set register via debugger.
+ * [VM/BEEP] Add feature ; dump register via debugger.
+ * [VM/PCM1BIT] Add feature ; dump register via debugger.
+ * [VM/I80x86/V30] Start debugger even halting.
+ * [VM/I80x86/8088/V30] Make i86/186/88/286 and V30 to common_vm.
+ * [VM/I386] Fix WRONG flag mask at LMSW.
+ * [VM/I386] MOV CR0 EyX : Fix wrong flags handling.
+ * [VM/I386] Exitable when falling into infinite TRAP-Loop.
+ * [VM/I386] mov CRx,R32/mov r32,CRx : Adjusting.
+ * [VM/i8259] Add PIC HACKing flag for PC9801.
+ * [VM/uPD7810/uPD7907] PC2001: Include uPD7810 variants and uPD7907 to libCSP_common_VM.
+ * [VM/MB8877] Fix buffer overflow with logging.
+ * [VM/Z80DMA] TODO/WIP: Workaround for https://tablacus.github.io/LSX-Dodgers/ .This still be not resolved issue.
+ * [VM/EVENT] Add remove_context_cpu().This may not effect to MAIN_CPU(id==0).
+ * [DOC/FM7] Fix typo (*ﾉω・*)てへぺろ
+ * [Qt/LOGGER] Improve locking.
+ * [UI/Qt] OOPs: Fix LACK of DATARECORDER BUTTONS(abolish of USE_TAPE_BUTTON): Lack of merging UPSTREAM 2018/10/07.
+ * [UI/Qt] MENU: Split some methods (of Ui_MainMenuBase::) to menu_emulator.cpp and menu_machine.cpp .
+ * [UI/Qt] MENU: Simplify menu creation.
+ * [CONFIG/Qt] Fix bit order of logging configure.
+ * [BUILD/CMAKE] Add CPU affinity mask when compiling.This may work only with GNU/Linux host.
+ * [BUILD/CMAKE] Improve build message with finished.
+ * [BUILD/MINGW] Update optimize parameter.
+ * [BUILD] Separate definitions of archtecture flags.
+ * [BUILD] Add ARM32/64 definitions (initial).Still not testing.
+ * Built with bbbb75cdc4051269c60a5f7ba18881eda56e8fd3 (or later).
+
+-- Aug 16, 2019 20:23:45 +0900 K.Ohta <whatisthis.sowhat@gmail.com>
+
+* SNAPSHOT May 18, 2019
+ * Upstream 2019-04-30.
+ * [General] Add Hino Electronics CEFUCOM-21.
+ * [Build/GCC] Fix FTBFS without setting LTO_THREADS value and selecting USE_LTO.
+ * [Build/Linux] buildvars.dat: Add "USE_SHRINK_DEBUG_SYMBOL" flag to save disk space.
+ * [COMMON] Add high pass/low pass filter function.
+ * [VM/PCM1BIT,AY3_891x] Add LPF feature.See initialize_sound().
+ * [VM/EVENT] Add sound sampling (from host machine) feature framework.
+ * [COMMON] Add RINGBUFFER:: class, extend of FIFO::.
+ * [FIFO] Add [fill|empty] warning feature.This may be useful for some devices. i.e. 16550 UART, variants of i8251.
+ * [FILEIO] Add StateVector() classes.
+ * [VM/DEVICE] Add CPU pseudo SIGNALS, 108 to 110.
+ * [VM/COMMON] Delete unneeded __builtin_assume_aligned().MinGW32 build works built with "-msse2 -O3".
+ * [VM/DMA] Add NEW signal, notify to write-changed address.
+ * [VM/EVENT] Add new APIs for recording sound.
+ * [VM/PC9801RA] Note: Still not running Microsoft's EMM386.EXE and FreeBSD(98).Will fix.
+ * [VM/PC9801] [SASI_BIOS] Fix wrong sectors at FORMAT command.Fix run out at DOS installation.
+ * [VM/PC9801] Add some DIPSWITCH features.
+ * [VM/PC9801,FMR50,FMR30][SASI_BIOS] Add translate_address(segment,offset) to DEVICE:: .
+ * [VM/PC9801,FMR50] Add pseudo-cycles args to pseudo-bios for i86/286/386.
+ * [VM/PC9801] Truely bootable MS-DOS 6.20,excepts EMM386.EXE.
+ * [VM/PC9801][SOUND] Playable PCM of PC-9801-86.
+ * [VM/PC9801][PC-9801-86] Mostly implement PC-9801-86 sound board.Touhou-Huumaroku (partly) works.
+ * [VM/PC9801][MEMBUS] Remove shadow_memory, this includes ram[0xc0000]-ram[0xe7fff].
+ * [VM/PC9801][MEMBUS] Maybe complete to set mapping bus to 32bit VMs except Hi-Reso.
+ * [VM/PC9801][MEMBUS] Faster memory access.
+ * [VM/PC9801][EGC] Make EGC faster (maybe...).
+ * [VM/PC9801][CPUREG] Add ARCTIC (a.k.a Timestamp) and 0.6uS? Wait.
+ * [VM/PC9801][SASI_BIOS] Improve SENSE command.Write results to 0000:0585h at INITIALIZE.
+ * [VM/PC9801][DISPLAY] EGC: Add write protect register (03h).
+ * [VM/PC9801][FLOPPY] Improve drive setting via 2DD <-> 2HD.
+ * [VM/PC9801][MOUSE] Set clock to 120Hz when resetting.
+ * [VM/PC9801] Support low resolution monitor.This is WIP.
+ * [VM/PC9801][VM/I386,I286] Add variable (main) CPU clock via CPU's write_signal().Add cpu_wait_foo() with CPU_EXECUTE(foo) .
+ * [VM/PC9801RA] Enable to boot contains i386 CPU with (about) correctness ITF and IPL.
+ * [VM/PC9801RA] Enable EGC.
+ * [VM/I386] Separate I386_OP(int) to I386_OP(int_16) and I386_OP(int_32) because pseudo bios int call (maybe 1Bh) should be in 16bit mode.
+ * [VM/I386] Enable debug log (logerror()).
+ * [VM/I386] Improve CALL ABS SELECTOR:OFFSET.
+ * [VM/I386] Call PSEUDO-BIOS even VM86 mode, EMM386.EXE for FreeDOS(98) and VEM486 (at MS-DOS 6.2) may work(still unstable a bit).
+ Some games, i.e. Touhou-KaikiDan work now.
+ * [VM/I386] Faster FETCH/READ.
+ * [VM/I386] Make some functions around address translation INLINE.
+ * [VM/I386] Fix unexpected page fault when accessing memories.
+ * [VM/I386] Try to call pseudo-bios even within protected mode (inside of i386_trap()).
+ * [VM/DEVICE,I386,I286] Add total_icount via read_signal().To implement PC-9801's clock counter.
+ * [VM/DEVICE] Add address_translate() API to generic devices.
+ * [VM/I8237] Debug register dump: Add "BANK" registers.
+ * [VM/I286][PC9801] Add SIG_I386_FORCE_RESET to notify resetting to external devices.Fix "A20 ERROR" at rebooting PC-9801(32BIT MODELS) with rebooting from program.
+ * [VM/UPD7220][PC9801] Add GDC clock feature. UPD7220::set_clock_freq().
+ * [VM/UPD7220] Implement position limiter for drawing (line etc).You may set gdc_foo->set_screen_width() and gdc_foo->set_screen_height().
+ * [VM/UPD7220] Apply "uPD7220 Design manual".make FIFO as ring buffer.
+ * [VM/UPD7220] More precision emulation.
+ * [VM/UPD7220][COMMON_VM] Integrate UPD7220_BASE:: and UPD7220:: to UPD7220:: .
+ * [VM/UPD7220] Fix not blink cursor.
+ * [VM/UPD7220] Improve around command interpret.This makes apply *real* command-queue-empty to IO 00h:BIT2.
+ * [VM/UPD7220][PC9801] Add UGLY PC98 HACK to UPD7220:: from NP2.
+ * [VM/UPD7220] Update around SYNC and drawing(WIP).
+ * [VM/YM2203] Fix wrong status reply at address #3.
+ * [VM/MEMORY] Faster memory access.
+ * [VM/MC6809][COMMON] Improve disassembler.Thanks to HASERIN-San.
+ * [VM/MC6809][DISASM] Fix offset address around INDEX addressing.
+ * [VM/PC9801][MEMORY] Add new API at copy_table_[r|w|rw](to, start, end).
+ * [VM/PC9801][DISPLAY] Faster accessable GDC.
+ * [VM/PC9801][DISPLAY] More faster VRAM access (via EGC/GRCG).
+ * [VM/PC9801][SASI_BIOS] Fix status values of SASI commands.
+ * [VM/LIBCPU_NEWDEV] Remove deprecated classes.
+ * [BUILD/WIN32] Adjust GCC option for MinGW.
+ * [QT/MENU_FLAGS] Fix TYPO.
+ * [QT/EMU,OSD] Adjust emulation sequence.
+ * Built with 88b18e84a6e8049da97d15ddc96d5acf30b1fcb5 (or later).
+
+-- May 18, 2019 23:00:59 +0900 K.Ohta <whatisthis.sowhat@gmail.com>
+
* SNAPSHOT February 22, 2019
* Upstream 2019-02-19.
* [VM] Fix crash when end of emulation at various(!) VMs.
* [Qt/OpenGL] Now, core profile needs less than OpenGL 4.5.
* [Qt/OpenGL] Fix not save screenshot with OpenGL renderers.(This issue didn't happen with OpenGL ES).
* [Qt/AVIO] Fix wrong color at one-board-computers.
- * Built with b52a6f59c59908523e27e81911d17ba37dd2c1ac (or later).
-
--- February 21, 2019 21:35:48 +0900 K.Ohta <whatisthis.sowhat@gmail.com>
+ * Built with 7574bd8b47c65e32c4f4a41ec593db71cc375230 (or later).
+
+-- February 22, 2019 04:44:44 +0900 K.Ohta <whatisthis.sowhat@gmail.com>
* SNAPSHOT January 13, 2019
* Upstream 2019-01-11 .
OSDN Git Service
