+6/8/2022
+
+[CRC80] support Computer Research CRC-80
+
+
+5/29/2022
+
+[M23/DISPLAY] add pseudo jis font image
+
+
+5/28/2022
+
+[VM/MB8877] support to get if disk is changed
+[VM/Z80CTC] improve to raise irq in more precise frequency
+
+[M23] improve not to show busy in fdc status after seek command finished
+[M23] fix frequency of input clock to Z80CTC
+[M23] fix daisy chain order of Z80 family chips
+[M23/KEYBOARD] fix key map table
+[M23/KEYBOARD] support input port 0xEF to get keyboard type
+
+5/25/2022
+
+[WINMAIN] support showing indicator LEDs on status bar for any purposes
+
+[VM/MB8877] support ready signal
+[VM/Z80CTC] improve for timer overrun case
+[VM/Z80SIO] improve receive interrupt (thanks Mr.YAT)
+
+[M23] support SORD M23
+[MYCOMZ80A] support floppy drives and nmi signal
+
+
+5/7/2022
+
+[VM/I8080] fix issue in the case CALL/RST performed by interrupt while halted
+
+[EX80BS] support TOSHIBA EX-80BS (eEX-80 is renamed to eEX-80BS)
+
+
+4/9/2022
+
+[COMMON] avoid C5208 and C26495 warnings on VC++2019 (thanks Mr.Meister)
+[EMU/DEBUGGER] support mount and unmount image files
+
+[PC8801MA/FLOPPY] support changing access lamp of floppy drives
+[SMC777/MEMORY] improve screen renderer for scrolling
+[SMC777/MEMORY] improve joystick port not to keep trigger#2 pressed
+[SMC777/MEMORY] improve for key releasingg
+
+
+4/5/2022
+
+[COMMON/FILEIO] improve functions for flush and wchar_t/char accessors
+[EMU/DEBUGGER] support save_state and load_state
+[EMU/WIN32] support changing access lamp of floppy drives
+[WIN32/CONSOLE] support telnet client
+[WIN32/SCREEN] fix to reinitialize Direct3D9 when device is lost
+
+[VM/Z80DMA] support enable after reti command (thanks Mr.Sato)
+[VM/Z80DMA] support interrupt on ready when WR3 is written (thanks Mr.Sato)
+
+[FX9000P] support CASIO FX-9000P
+[X1/DISPLAY] fix smooth vertical scroll
+[X1TURBO/FLOPPY] improve motor on signal for spindle-up delay
+[X1TURBO/FLOPPY] support changing access lamp of floppy drives
+
+
+12/30/2021
+
+[VM/DATAREC] support to enable/disable playing signal and voice separately
+[VM/I386_NP21] fix DAA/DAS/AAA/AAS/AAM/AAD based on DOSBox
+[VM/I386_NP21] fix SHLD/SHRD for n > 15 case
+[VM/I386_NP21] fix FCOM/FCOMI/FXAM for NaN and INF cases
+[VM/I386_NP21] fix FDECSTP/FINCSTP to clear C1 flag
+[VM/I386_NP21] fix FLD to set/clear C1 flag when stack overflow occurs or not
+[VM/I386_NP21] fix FSTENV/FLDENV/FSAVE/FLDENV to consider data16 prefix
+[VM/Z80DMA] fix not to enter too long loop (thanks Mr.YAT)
+
+[BX1] add keyboard and display artwork
+[MZ80K/MEMORY] fix v-gate signal (thanks Mr.Hlide Fremen)
+[MZ700/MEMORY] fix vblank signal timing (thanks Mr.Koucha-Youkan)
+[PC6001] remove some codes from iP6 Plus (thanks Mr.tanam)
+[PHC25/KEYBOARD] support _ and kana key
+[PHC25/SYSTEM] support GM1 signal (thanks Mr.Moroboshi)
+
+
+5/2/2021
+
+[VM/DATAREC] fix mixing sound track
+[VM/HD46505] support smooth vertical scroll
+[VM/MC6843] fix seek command
+[VM/MC6844] fix data chain register to consider 2/4 channel select bit
+[VM/MC6844] fix to transfer 64K when byte count register is zero
+[VM/Z80CTC] fix to apply written time constant just after reset bit is cleared
+
+[BX1] fix memory map around ram
+[BX1] support cartridge rom images
+[BX1/DISPLAY] add missing font patterns
+[BX1/FLOPPY] support i/o ports around fdc
+[BX1/KEYBOARD] support PROG.SELECT switch
+[BX1/PRINTER] support AUTO PRINT switch
+[MZ1500/JOTSTICK] support joystick (thanks Mr.Koucha-Youkan)
+[PC6001] remove some codes from iP6 Plus (thanks Mr.tanam)
+[X1TURBO/DISPLAY] support smooth vertical scroll
+
+
+2/7/2021
+
+[WINMAIN] improve WM_KEYDOW/WM_KEYUP events for VK_PROCESSKEY case
+[WIN32/CONSLE] improve routine to change console size
+
+[VM/DISK] fix density flag when loading solid image with fm sectors
+[VM/MC6843] fix track zero flag in STRA
+[VM/MC6843] fix seek error flag in STRB
+[VM/MC6843] fix seek command
+
+[BX1/DISPLAY] improve for drawing digitron display
+[BX1/KEYBOARD] improve I/O ports for detecting key pressed/released
+[BX1/PRINTER] add ugly patch for printer process
+
+
+1/24/2021
+
+[VM/I8279] support 8279 (based on MAME)
+
+[MP85] support MITEC MP-85
+
+
+1/17/2021
+
+[VM/UPD765A] improve for the case tc is asserted while reading/writing sector
+
+[PC8801/PC88] improve to render screen with port params at end of disp timing
+[X1TURBO/FLOPPY] fix to change type of all drives (thanks Mr.Sato)
+
+
+1/3/2021
+
+[WINMAIN] improve for pressing shift key and numpad key
+
+[MZ80K] fix roman/kana conversion
+[MZ80K/KEYBOARD] improve for pressing right shift key and numpad key
+
+
+12/31/2020
+
+[PC8801/PC88] improve crtc to refer reverse setting in start display command
+
+
+12/21/2020
+
+[VM/SCSI_CDROM] fix start frame of CD-DA playing when track number is specified
+
+[PCENGINE/PCE] fix issue that ADPCM is mistakenly looped
+
+
+12/19/2020
+
+[VM/SCSI_CDROM] fix pre-gap of first track when it is audio track
+
+
+12/18/2020
+
+[VM/SCSI_CDROM] improve routine to get start/end frame of CD-DA playing
+
+[PC8801/PC88] support 8inch DMA-type floppy drives for PC-8001mkII/SR
+[PC9801/DISPLAY] improve EGC (thanks Mr.Ryuji Okamoto)
+
+
+12/16/2020
+
+[PC8801/DISKIO] improve to read/write files in initial current directory
+[PC8801/PC88] support force ready/drq mask register for DMA-type FDD
+[PC8801/PC88] fix PC-8001mkIISR hiragana font when PCG-8100 is enabled
+
+
+12/15/2020
+
+[PC8801/DISKIO] support M88 DiskDrv (thanks Mr.CISC and Mr.apaslothy)
+[PC8801/PC88] support PC-8001mkIISR hiragana font
+[PC8801/PC88] support to disable 5inch/8inch-FDD interfaces
+[PC8801/PC88] support to disable updating scan line setting automatically
+[PC8801/PC88] fix mouse data when position is not latched
+
+
+12/14/2020
+
+[PC8801/PC88] support 8inch DMA-type floppy drives
+
+
+12/13/2020
+
+[VM/MC6843] support MC6843 (based on MAME)
+[[VM/SCSI_CDROM] fix to reset logical block size in Test Unit Ready command
+
+[BX1] support CANON BX-1 (not work)
+[MZ1500/QUICKDISK] improve for BSD record (thanks Mr.Motochan1500)
+[PC8801/PC88] fix hireso graphic screen when scan line is disabled
+
+
+12/12/2020
+
+[PC8801/PC88] fix to clear attibutes at starting new frame
+[PC8801/PC88] fix to read status of 2nd OPNA
+
+
+12/11/2020
+
+[PC8801/PC88] fix to run dma from memory to crtc when (rd,wr)=(0,0)
+[PC8801/PC88] fix to run dma from scsi to memory only when count > 0
+
+
+12/8/2020
+
+[COMMON] fix build error on VC++2019 (thanks Mr.Sato)
+
+[VM/Z80CTC] fix not to clear in-service at software reset (thanks Mr.Sato)
+[VM/Z80DMA] fix stall cycles at BUSACK in byte mode (thanks Mr.Sato)
+
+[X1TURBOZ/DISPLAY] fix zpalette in 64 colors, 2 screens mode (thanks Mr.Sato)
+
+
+12/6/2020-2
+
+[MZ1500] fix inp(0xe8) to detect voice board is missing (thanks Mr.kitahei88)
+[X1TURBOZ/DISPLAY] fix to update zpalette at vline=0 (thanks Mr.Sato)
+
+
+12/6/2020
+
+[OSD/WIN32] import Unity plug-in code (thanks Mr.Marukun)
+
+[VM/I386_NP21] update to Neko Project 21/W ver0.86 rev79 beta4
+[VM/UPD765A] fix transfer size to 128 << min(N, 7) (thanks Mr.Kugimoto)
+
+[MZ1500/QUICKDISK] improve for QDF format (thanks Mr.kitahei88)
+[MZ1500/QUICKDISK] improve for BSD record (thanks Mr.Yuushi)
+[PC9801/MEMORY] fix switching BIOS ROM/RAM
+[X1/CZ8RB] support CZ-8RB (thanks Mr.Meister)
+
+
+8/16/2020
+
+[VM/SCSI_DEV] improve to specify data req signal delay (thanks Mr.Sato)
+[VM/SCSI_DEV] fix read6/write6 command in 0 length case (thanks Mr.Sato)
+[VM/SISI_HDD] change drive type to hot swappable
+[VM/SISI_HDD] improve seek time (thanks Mr.Sato)
+[VM/SASI_HDD] support winchester drive parameters command
+[VM/Z80DMA] improve to sense rdy signal as level, not edge (thanks Mr.Sato)
+
+[MZ2500/CRTC] fix sub plane address in 640x200 16colors mode (thanks Mr.856)
+[SVI3X8] support SPECTRAVIDEO SVI-3x8 (thanks Mr.tanam)
+[X1] add menu items for FD2/FD3 (thanks Mr.Sato)
+[X1/DISPLAY] fix high speed pcg definition (thanks Mr.YAT)
+[X1TURBOZ/DISPLAY] improve palette update timing (thanks Mr.Sato)
+
+
+8/14/2020
+
+[OSD/WIN32] support x64 build (thank Mr.Marukun)
+[OSD/WIN32] support Direct2D
+
+[MICOM_MAHJONG] support Nippon Mail Service MICOM MAHJONG (thanks Mr.GORRY)
+[TVBOY] support GAKKEN TV BOY (thanks Mr.tanam)
+
+
+4/6/2020
+
+[VM/I386_NP21] update to Neko Project 21/W ver0.86 rev72
+
+
+2/21/2020
+
+[VM/I386_NP21] update to Neko Project 21/W ver0.86 rev71 beta4
+
+[PC9801VX] support to switch cpu mode to V30
+[PC9801RA] support to switch cpu mode to V30
+
+
+2/17/2020
+
+[EMU] add is_floppy_disk_connected() and is_quick_disk_connected()
+[WINMAIN] disable floppy/quick disk drive menus when drives are disconnected
+
+[VM/I8080] improve disassembler to distinguish 8080 and 8085
+[VM/I86] split i86/i88/i186/v30 from I286 class
+[VM/I86] fix aam in v30
+[VM/I86] support 8080 emulation mode in V30
+[VM/I386_NP21] improve not to explicitly accept irq while executing opecode
+[VM/I386_DASM] split i386 disassembler from I286/I386 class
+[VM/V30_DASM] split v30 disassembler from I286 class
+[VM/V30_DASM] add 8080 disassebler for 8080 emulation mode
+[VM/VM_TEMPLATE] add is_floppy_disk_connected() and is_quick_disk_connected()
+
+[PC9801] support to enable/disable 1MB/640K/320KB-FDD interfaces
+
+
+2/1/2020
+
+[EMU] support to create blank hard disk image (*.hdi/*.nhd)
+[WINMAIN] add menu items to mount blank hard disk image
+
+[VM/DEVICE] improve memory/io bus interfaces for 16/32bit access
+[VM/DEVICE] add get_event_clocks() and get_cpu_clocks()
+[VM/EVENT] add get_event_clocks() and get_cpu_clocks()
+[VM/I386_NP21] support 80386 (based on Neko Project 21/W i386 core)
+[VM/I8259] make update_intr() public
+[VM/MEMORY] improve memory bus interfaces for 16/32bit access
+[VM/MEMORY] make rd_table/wr_table/addr_shift public
+[VM/UPD7220] fix stop command (thanks Neko Project 21/W)
+
+[FMR50] change i386 core from MAME to Neko Project 21/W
+[FMR50] support to mount blank hard disk image
+[MZ2500] support to mount blank hard disk image
+[MZ2800] support to mount blank hard disk image
+[PC9801] change i386 core from MAME to Neko Project 21/W
+[PC9801] support to mount blank hard disk image
+[PC9801/DISPLAY] improve code for big-endian host machine
+[PC9801/FMSOUND] support 86-type PCM (thanks Neko Project 21/W)
+[PC9801/MEMBUS] improve memory bus interfaces for 16/32bit access
+[PC9801/MOUSE] fix irq number in hireso mode
+[PC9801/SASI] improve irq/drq signals to generate from sasi bus signals
+[X1TURBO] support to mount blank hard disk image
+[X1TURBO/IOBUS] fix not to clear vram in reset()
+
+
+1/23/2020
+
+[VM/Z80DMA] fix byte counter read by read mask follows command (thanks Mr.Sato)
+
+
+12/31/2019
+
+[MZ2500/CRTC] apply crtc patch (thanks Mr.Koucha-Youkan)
+
+
+11/3/2019
+
+[PC98RL] fix horizontal frequency
+[PC98RL/DISPLAY] fix not to change horizontal frequency
+[PC98RL/DISPLAY] fix cg window
+[PC98RL/DISPLAY] fix multiple vram planes accessing
+[PC9801/DISPLAY] fix vram word accessing (thanks Mr.Artane.)
+
+
+10/28/2019
+
+[X1/PSUB] improve tape recording
+[X1/SUB] improve tape stopping
+[X1/SUB] improve tape write-protected signal
+
+
+10/22/2019
+
+[X1/PSUB] improve tape end signal
+[X1/SUB] improve tape end signal
+
+
+4/30/2019
+
+[VM/DEVICE] add is_primary_cpu() and update_extra_event()
+[VM/EVENT] support to udpate event while cpu is running one opecode
+[VM/I8259] fix reading isr register (thanks Mr.rednow)
+[VM/SCSI_HOST] fix to raise irq at command/message phase
+[VM/Z80] improve to update event in every read/write cycle
+
+[CEFUCOM21] support Hino Electronics CEFUCOM-21 (not work)
+[MZ2500/CRTC] apply crtc patch (thanks Mr.Koucha-Youkan)
+[PC8801MA] improve to enable/disable cmdsing and pcg
+[PC8801MA] improve to enable/disable changing palette for each scan line
+
+
+2/19/2019-2
+
+[VM/DEVICE] revirt fixes in 2/19/2019
+[VM/EVENT] revirt fixes in 2/19/2019
+[VM/Z80] revirt fixes in 2/19/2019
+
+
+2/19/2019
+
+[VM/DEVICE] add is_primary_cpu() and update_extra_event()
+[VM/EVENT] support to udpate event while cpu is running one opecode
+[VM/Z80] improve to update event in every read/write cycle
+
+[MZ2500/MEMORY] improve pcgram wait in display timing
+
+
+2/16/2019
+
+[EMU/DEBUGGER] improve to enumerate devices that is debugger available
+[EMU/DEBUGGER] improve to show all breaked reasons
+[EMU/DEBUGGER] support breakpoint of cpu selected by "! device" command
+[EMU/*] simplify code for debugger
+[VM/*] simplify code for debugger
+
+[VM/I8237] support break point for direct memory access
+[VM/MB8877] fix not to wait 60ms to start read/write after seek is finished
+[VM/MC6844] support break point for direct memory access
+[VM/TMS9918A] support break point for registers and vram access
+[VM/UPD71071] support break point for direct memory access
+[VM/Z80DMA] support break point for direct i/o and memory access
+
+
+2/14/2019
+
+[EMU/DEBUGGER] support break point for non-cpu device
+[EMU/DEBUGGER] change command length from 64 to 1024
+
+[VM/AY_3_891X] support break point
+[VM/DEVICE] add get_debug_data_addr_space()
+[VM/DEVICE] change type of get_debug_regs_info() from void to bool
+[VM/MB8877] fix to decrease first seek time by 500us (2D/2DD) or 250us (2HD)
+[VM/TMS9918A] support break point
+[VM/YM2151] support break point
+[VM/YM2203] support break point
+[VM/Z80CTC] fix to reset interrupt req/in service by bit2 of control register
+[VM/Z80DMA] fix to reset interrupt req/in service by reset command
+
+[X1TURBO/EMM] support to access vram as memory space from debugger
+[X1TURBO/IOBUS] support to access vram as memory space from debugger
+[X1TURBO/IOBUS] support break point
+
+
+2/9/2019
+
+[EMU/DEBUGGER] enlarge text buffer size
+
+[VM/DEVICE] add get_context_child() to enumerate daisy-chained devices
+[VM/DISK] add get_sector_info()
+[VM/MB8877] improve debugger to show current head position and disk geometry
+[VM/MB8877] fix not to abort command when eject disk in unselected drive
+[VM/UPD765A] improve debugger to show current head position and disk geometry
+[VM/Z80*] add get_context_child() to enumerate daisy-chained devices
+
+[X1TURBO] fix to force clear iei/oei of z80 family devices when reset vm
+[X1TURBO/DISPLAY] fix to check bit0/2 of port 0x1fd0 in draw_text()
+
+
+2/8/2019
+
+[EMU/*] simplify code to draw screen while debugging cpu
+[OSD/*] simplify code to draw screen while debugging cpu
+[VM/*] simplify code to draw screen while debugging cpu
+
+[BUBCOM80/DISPLAY] improve dmac
+[HC80/IO] fix slave-cpu command 0x27 and 0x29 (thanks Mr.Stefano Bodrato)
+
+
+2/7/2019
+
+[EMU/DEBUGGER] improve to draw screen while debugging cpu
+[EMU] add override/restore/run_wndproc() for debugger
+[EMU] add create_bank_floppy_disk()
+[OSD/WIN32] add override/restore/run_wndproc() for debugger
+
+[VM/315_5124] improve draw_screen() for debugger
+[VM/H6280] improve to run window procedure while suspending for debugger
+[VM/I286] improve to run window procedure while suspending for debugger
+[VM/I386] improve to run window procedure while suspending for debugger
+[VM/I8080] improve to run window procedure while suspending for debugger
+[VM/M6502] improve to run window procedure while suspending for debugger
+[VM/MC6800] improve to run window procedure while suspending for debugger
+[VM/MC6809] improve to run window procedure while suspending for debugger
+[VM/MCS48] improve to run window procedure while suspending for debugger
+[VM/TMS9918A] improve draw_screen() for debugger
+[VM/TMS9995] improve to run window procedure while suspending for debugger
+[VM/UPD7801] improve to run window procedure while suspending for debugger
+[VM/UPD7810] improve to run window procedure while suspending for debugger
+[VM/V9938] improve draw_screen() for debugger
+[VM/V99X8] improve draw_screen() for debugger
+[VM/Z80] improve to run window procedure while suspending for debugger
+
+[BUBCOM80/DISPLAY] improve draw_screen() for debugger
+[FAMILYBASIC/PPU] improve draw_screen() for debugger
+[MZ80K/DISPLAY] improve draw_screen() for debugger
+[MZ1500/MEMORY] improve draw_screen() for debugger
+[PC8801/PC88] improve draw_screen() for debugger
+[PCENGINE/PCE] improve draw_screen() for debugger
+[SMC777/MEMORY] improve draw_screen() for debugger
+[X1/DISPLAY] improve draw_screen() for debugger
+
+
+1/29/2019
+
+[MZ80K/MEMORY] support COLOR GAL 5 (thanks Mr.Suga)
+[PC8001/PC88] fix issue that cursor is mistakenly hidden
+
+
+1/18/2019
+
+[PC8001/PC88] clear ram[0xff33] for DEMPA Galaxian
+[SMC777/MEMORY] improve to render screen in each scan line
+
+
+1/16/2019
+
+[EMU] improve to reinitialize vm in reset when dipswitch is changed
+
+[VM/UPD765A] fix st3 in sence devstat command to set two-side bit (temporary)
+
+[PC8801] support GSX-8800
+[PC8801] support to enable/disable PC-8801-11/GSX-8800/PCG-8100
+[PC8801] fix some degradations
+
+
+1/11/2019
+
+[PC8001] support NEC PC-8001
+[PC8001] support NEC PC-8001mkII
+[PC8801] support NEC PC-8801
+[PC8801] support NEC PC-8801mkII
+
+
+12/28/2018
+
+[EMU] support to insert blank 2D/2DD/2HD disk image
+
+
+12/27/2018
+
+[PC6001/PSUB] improve keyboard irq
+[PC8801/PC88] improve initial memory map when CD BIOS is loaded
+[PC8801/PC88] support CD-DA fade in/out
+
+
+12/18/2018
+
+[VM/I386] improve i386 core based on MAME 0.204
+[VM/SCSI_CDROM] improve vendor specific command for NEC CD-ROM^2
+[VM/SCSI_DEV] fix to write buffer when current command is not WRITE6/10/12
+[VM/SCSI_DEV] fix Request Sense command to get correct data length
+[VM/SCSI_HDD] fix not to write buffer when current command is not WRITE6/10/12
+
+[PC8801/PC88] improve initial memory map when CD BIOS is loaded
+[PC8801/PC88] revert screen renderer fixes in 12/1/2018 except scanline issues
+[PC8801/PC88] fix dmac registers to clear higher 16bits of pair32_t
+[PC8801/PC88] fix dmac to read i/o in verify mode
+
+
+12/9/2018
+
+[VM/SCSI_CDROM] add vendor specific command for NEC CD-ROM^2
+
+[PC8801/PC88] support CD-ROM drive (thanks M88/cdif)
+[PC8801/PC88] support Video Art Boad (thanks X88000)
+
+
+12/5/2018
+
+[VM/MB8877] improve reset() to finish previous command and reset fdc completely
+[VM/Z80] add read_signal() to read irq status
+
+[PC8801/PC88] improve to render scan line with black if color graphic mode
+[SMC70/MEMORY] support 640x400 and 160x100 graphic mode
+[SMC777/MEMORY] fix issue that text blink is not working
+[SMC777/MEMORY] improve inport 21h to read vsync irq status
+[SMC777/MEMORY] improve inport 51h to read cursor and space keys as joystick #1
+[VM/*] improve tape interfaces for each virtual machine
+
+
+12/4/2018
+
+[CONFIG] remove fmgen_dll_path and add mame2151_dll_path/mame2608_dll_path
+
+[VM/YM2203] remove HAS_YM2608 and YM2203_PORT_MODE to simplify code
+
+[PC8801] support HMB-20 sound board
+
+
+12/2/2018-2
+
+[PC8801/PC88] fix text/graph renderer again (thanks Mr.Bookworm)
+
+
+12/2/2018
+
+[PC8801/PC88] fix not to apply reverse attribute to monochrome graphic screen
+
+
+12/1/2018
+
+[PC8801] enable/disable drawing scan line when monitor type is hireso/standard
+[PC8801/PC88] improve text attributes/rederer (thanks ePC-8801MA\89ΓΌ)
+[PC8801/PC88] fix analog back color
+[PC8801/PC88] improve routine to change palette for each scan line
+
+
+11/28/2018
+
+[WIN32/INPUT] support joystick with multiple axes and hat key
+[WIN32/INPUT] improve joystick to keyboard function for numpad key 5
+
+
+11/27/2018
+
+[WIN32/INPUT] support joystick to keyboard function
+[WIN32/SCREEN] support Window x1.5 mode
+
+[PC8801/PC88] support PC key, that is mapped to F11
+
+
+11/23/2018
+
+[VM/I386] improve i386_limit_check to consider data size
+[VM/SCSI_DEV] improve REQ timing just after ACK is raised
+
+[PC6001/*] apply patch for timing issues (thanks Mr.Akikawa)
+[PC8801/PC88] support to change palette for each scan line
+[PC9801] support PC-9801-86 sound board for PC-9801RA and PC-98RL
+[PC9801/FMSOUND] fix process_state
+
+
+10/14/2018
+
+[COMMON/FILEIO] improve functions to load/save state file for big-endian
+
+[VM/*] improve process_state for big-endian
+
+
+10/13/2018
+
+[EMU/DEBUGGER] increase breakpoint number from 8 to 16
+
+[VM/VM_TEMPLATE] fix issue that virtual machine is not correctly released
+
+
+10/10/2018
+
+[VM/SCSI_DEV] fix ack signal issue when multiple devices are attached
+[VM/SCSI_HOST] support to output cd/io/msg/req signals to other devices
+
+[MZ2800/SASI] support SASI I/F and HDD (thanks Mr.Oh!Ishi)
+
+
+10/7/2018
+
+[COMMON] add pair16_t and pair64_t (thanks Mr.Artane.)
+[COMMON] rename pair_t to pair32_t
+[COMMON] add functions for endians (thanks Mr.Artane.)
+[EMU] fix roman/kana conversion when uppercase alphabet is input (thanks Mr.Artane.)
+[EMU] abolish SUPPORT_VARIABLE_TIMING and USE_TAPE_BUTTON
+[WINMAIN] abolish USE_ALT_F10_KEY
+[WIN32/INPUT] abolish NOTIFY_KEY_DOWN and USE_SHIFT_NUMPAD_KEY
+[WIN32/INPUT] improve key input for shift + numpad keys
+
+[VM/*] introduce VM_TEMPLATE (thanks Mr.Artane.)
+
+
+10/5/2018
+
+[COMMON] combine load_state and save_statet of cur_time_t to process_state
+[COMMON/FIFO] combine load_state and save_statet to process_state
+[COMMON/FILEIO] add functions to load/save state file
+
+[VM/*] combine load_state and save_statet to process_state
+[VM/I386] fix to load/save vtlb state
+[VM/I386] fix to rebuild tables when load state
+
+[JX] support save/load state
+[FM77AV] import Mr.Artane.'s fixes (Release in September 30, 2018)
+
+
9/30/2018
[COMMON/FILEIO] improve Fseek for compressed file by gzip