*
*/
+#include "fm7.h"
#include "fm7_mainio.h"
#include "../mc6809.h"
#include "../z80.h"
#include "../datarec.h"
-
-// TEST
-#if !defined(_MSC_VER)
-#include <SDL2/SDL.h>
+#if defined(HAS_DMA)
+#include "hd6844.h"
+#endif
+#if defined(_FM8)
+#include "bubblecasette.h"
#endif
FM7_MAINIO::FM7_MAINIO(VM* parent_vm, EMU* parent_emu) : DEVICE(parent_vm, parent_emu)
int i;
p_vm = parent_vm;
p_emu = parent_emu;
+#if defined(_FM8)
+ psg = NULL;
+#else
+ for(i = 0; i < 3; i++) {
+ opn[i] = NULL;
+ }
+# if !defined(_FM77AV_VARIANTS)
+ psg = NULL;
+#endif
+#endif
+ drec = NULL;
+ pcm1bit = NULL;
+ joystick = NULL;
+ fdc = NULL;
+ printer = NULL;
+
kanjiclass1 = NULL;
kanjiclass2 = NULL;
- opn_psg_77av = false;
+
+ display = NULL;
+ keyboard = NULL;
+ maincpu = NULL;
+ mainmem = NULL;
+ subcpu = NULL;
+#ifdef WITH_Z80
+ z80 = NULL;
+#endif
+#if defined(CAPABLE_JCOMMCARD)
+ jcommcard = NULL;
+#endif
+#if defined(_FM8)
+ bubble_casette[0] = NULL;
+ bubble_casette[1] = NULL;
+#endif
// FD00
clock_fast = true;
- lpt_strobe = false;
- lpt_slctin = false;
+ lpt_strobe = false; // bit6
+ lpt_slctin = false; // bit7
// FD01
lpt_outdata = 0x00;
// FD02
- cmt_indat = false; // bit7
+ cmt_indat = true; // bit7
cmt_invert = false; // Invert signal
- lpt_det2 = false;
- lpt_det1 = false;
- lpt_pe = false;
- lpt_ackng_inv = false;
- lpt_error_inv = false;
- lpt_busy = false;
+ irqstat_reg0 = 0xff;
+
// FD04
+#if defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX) || \
+ defined(_FM77AV20) || defined(_FM77AV20EX) || defined(_FM77AV20SX)
+ stat_kanjirom = true; // R/W : bit5, '0' = sub, '1' = main. FM-77 Only.
+#elif defined(_FM77_VARIANTS)
stat_fdmode_2hd = false; // R/W : bit6, '0' = 2HD, '1' = 2DD. FM-77 Only.
stat_kanjirom = true; // R/W : bit5, '0' = sub, '1' = main. FM-77 Only.
stat_400linecard = false;// R/W : bit4, '0' = connected. FM-77 Only.
- stat_400linemode = false; // R/W : bit3, '0' = 400line, '1' = 200line.
+#endif
firq_break_key = false; // bit1, ON = '0'.
firq_sub_attention = false; // bit0, ON = '0'.
intmode_fdc = false; // bit2, '0' = normal, '1' = SFD.
// FD05
extdet_neg = false;
-#ifdef WITH_Z80
- z80_sel = false; // bit0 : '1' = Z80. Maybe only FM-7/77.
-#endif
+ req_z80run = false;
+ z80_run = false;
// FD06,07
intstat_syndet = false;
intstat_rxrdy = false;
intstat_txrdy = false;
+ irqstat_timer = false;
+ irqstat_printer = false;
+ irqstat_keyboard = false;
// FD0B
// FD0D
// FD0F
- stat_romrammode = true; // ROM ON
-
// FD15/ FD46 / FD51
+#if defined(_FM8)
+ connect_psg = false;
+ {
+ opn_address[0] = 0x00;
+ opn_data[0] = 0x00;
+ opn_cmdreg[0] = 0;
+ }
+#else
connect_opn = false;
connect_whg = false;
connect_thg = false;
opn_data[i] = 0x00;
opn_cmdreg[i] = 0;
}
- joyport_a = 0x00;
- joyport_b = 0x00;
-
intstat_whg = false;
intstat_thg = false;
// FD17
intstat_opn = false;
intstat_mouse = false;
mouse_enable = false;
+#endif
// FD18-FD1F
connect_fdc = false;
fdc_statreg = 0x00;
fdc_headreg = 0x00;
fdc_drvsel = 0x00;
fdc_motor = false;
- irqstat_fdc = 0;
+ irqstat_fdc = false;
+ irqreg_fdc = 0xff; //0b11111111;
+ irqmask_syndet = true;
+ irqmask_rxrdy = true;
+ irqmask_txrdy = true;
+ irqmask_mfd = true;
+ irqmask_timer = true;
+ irqmask_printer = true;
+ irqmask_keyboard = true;
+ irqstat_reg0 = 0xff;
+
+
+ irqreq_syndet = false;
+ irqreq_rxrdy = false;
+ irqreq_txrdy = false;
+ irqreq_printer = false;
+ irqreq_keyboard = false;
+
// FD20, FD21, FD22, FD23
connect_kanjiroml1 = false;
#if defined(_FM77AV_VARIANTS)
#endif
#if defined(_FM77_VARIANTS) || defined(_FM77AV_VARIANTS)
boot_ram = false;
-#endif
+#endif
+
+#if defined(HAS_DMA)
+ dmac = NULL;
+#endif
+ bootmode = config.boot_mode & 3;
memset(io_w_latch, 0xff, 0x100);
+ initialize_output_signals(&clock_status);
+ initialize_output_signals(&printer_reset_bus);
+ initialize_output_signals(&printer_strobe_bus);
+ initialize_output_signals(&printer_select_bus);
+ initialize_output_signals(&irq_bus);
+ initialize_output_signals(&firq_bus);
+ initialize_output_signals(&nmi_bus);
+ set_device_name(_T("MAIN I/O"));
}
FM7_MAINIO::~FM7_MAINIO()
}
-
void FM7_MAINIO::initialize()
{
- int i;
event_beep = -1;
event_beep_oneshot = -1;
event_timerirq = -1;
event_fdc_motor = -1;
+ lpt_type = config.printer_type;
+ fdc_cmdreg = 0x00;
+
#if defined(_FM77_VARIANTS) || defined(_FM77AV_VARIANTS)
boot_ram = false;
# if defined(_FM77_VARIANTS)
# endif
# endif
#endif
-#ifdef HAS_MMR
- mmr_enabled = false;
- mmr_fast = false;
- window_enabled = false;
- //mmr_segment = 0x00;
- window_offset = 0x0000;
- //for(i = 0x00; i < 0x80; i++) {
- // mmr_table[i] = 0;
- //}
-#endif
- keycode_7 = 0x00;
+#if defined(_FM77AV_VARIANTS)
+ reg_fd12 = 0xbc; // 0b10111100
+#endif
+ bootmode = config.boot_mode & 3;
+ reset_printer();
}
void FM7_MAINIO::reset()
{
- int i;
if(event_beep >= 0) cancel_event(this, event_beep);
event_beep = -1;
if(event_beep_oneshot >= 0) cancel_event(this, event_beep_oneshot);
beep_snd = true;
beep_flag = false;
register_event(this, EVENT_BEEP_CYCLE, (1000.0 * 1000.0) / (1200.0 * 2.0), true, &event_beep);
-
+ // Sound
#if defined(_FM77AV_VARIANTS)
- opn_psg_77av = true;
hotreset = false;
-#else
- opn_psg_77av = false;
#endif
- connect_opn = false;
- connect_thg = false;
- connect_whg = false;
+ // Around boot rom
#if defined(_FM77_VARIANTS)
- boot_ram = (mainmem->read_signal(FM7_MAINIO_BOOTRAM_RW) == 0) ? false : true;
-#endif
-#if defined(_FM77AV_VARIANTS)
- //enable_initiator = true;
- //mainmem->write_signal(FM7_MAINIO_INITROM_ENABLED, (enable_initiator) ? 0xffffffff : 0 , 0xffffffff);
- boot_ram = (mainmem->read_signal(FM7_MAINIO_BOOTRAM_RW) == 0) ? false : true;
+ boot_ram = false;
+#elif defined(_FM77AV_VARIANTS)
+ boot_ram = true;
#endif
// FD05
- extdet_neg = false;
sub_cancel = false; // bit6 : '1' Cancel req.
sub_halt = false; // bit6 : '1' Cancel req.
sub_cancel_bak = sub_cancel; // bit6 : '1' Cancel req.
sub_halt_bak = sub_halt; // bit6 : '1' Cancel req.
- //sub_busy = false;
-
- extdet_neg = false;
-
- //stat_romrammode = true;
- // IF BASIC BOOT THEN ROM
- // ELSE RAM
- mainmem->write_signal(FM7_MAINIO_PUSH_FD0F, ((config.boot_mode & 3) == 0) ? 0xffffffff : 0, 0xffffffff);
-#if defined(_FM77AV_VARIANTS)
- kaddress.d = 0;
-#elif defined(_FM77_VARIANTS)
- kaddress.d = 0;
-#endif
+ req_z80run = false; // OK?
+ z80_run = false;
+
+ // FD02
+ cmt_indat = true; // bit7
+ cmt_invert = false; // Invert signal
+ lpt_det2 = true;
+ lpt_det1 = true;
+ lpt_type = config.printer_type;
+ reset_printer();
+
#if defined(_FM77AV_VARIANTS)
sub_monitor_type = 0x00;
#endif
-
-#ifdef HAS_MMR
- mmr_enabled = false;
- mmr_fast = false;
- window_enabled = false;
- //mmr_segment = 0x00;
- window_offset = 0x0000;
- mainmem->write_signal(FM7_MAINIO_WINDOW_ENABLED, (window_enabled) ? 0xffffffff : 0, 0xffffffff);
- mainmem->write_data8(FM7_MAINIO_WINDOW_OFFSET, window_offset);
- mainmem->write_signal(FM7_MAINIO_FASTMMR_ENABLED, (mmr_fast) ? 0xffffffff : 0, 0xffffffff);
- mainmem->write_signal(FM7_MAINIO_MMR_ENABLED, (mmr_enabled) ? 0xffffffff : 0, 0xffffffff);
- //mainmem->write_data8(FM7_MAINIO_MMR_SEGMENT, mmr_segment);
-#endif
- switch(config.cpu_type){
- case 0:
- clock_fast = true;
- break;
- case 1:
- clock_fast = false;
- break;
+ if(config.cpu_type == 0) {
+ clock_fast = true;
+ } else {
+ clock_fast = false;
}
- this->write_signal(FM7_MAINIO_CLOCKMODE, clock_fast ? 1 : 0, 1);
- mainmem->write_signal(FM7_MAINIO_CLOCKMODE, clock_fast ? 1 : 0, 1);
+ this->write_signals(&clock_status, clock_fast ? 0xffffffff : 0);
// FD03
irqmask_syndet = true;
irqmask_timer = true;
irqmask_printer = true;
irqmask_keyboard = true;
-
- irqmask_reg0 = 0x00;
-
irqstat_reg0 = 0xff;
+
intstat_syndet = false;
intstat_rxrdy = false;
intstat_txrdy = false;
irqstat_printer = false;
irqstat_keyboard = false;
+ irqreq_syndet = false;
+ irqreq_rxrdy = false;
+ irqreq_txrdy = false;
+ irqreq_printer = false;
+ irqreq_keyboard = false;
// FD00
- drec->write_signal(SIG_DATAREC_OUT, 0x00, 0x01);
- drec->write_signal(SIG_DATAREC_REMOTE, 0x00, 0x02);
+ if(drec != NULL) {
+ drec->write_signal(SIG_DATAREC_MIC, 0x00, 0x01);
+ drec->write_signal(SIG_DATAREC_REMOTE, 0x00, 0x02);
+ }
reset_fdc();
reset_sound();
// FD04
- firq_sub_attention = false; // bit0, ON = '0'.
firq_break_key = (keyboard->read_signal(SIG_FM7KEY_BREAK_KEY) != 0x00000000); // bit1, ON = '0'.
- display->write_signal(SIG_FM7_SUB_KEY_MASK, 1, 1);
- display->write_signal(SIG_FM7_SUB_KEY_FIRQ, 0, 1);
- maincpu->write_signal(SIG_CPU_FIRQ, 0, 1);
-
+ set_sub_attention(false);
+#if defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX) || \
+ defined(_FM77AV20) || defined(_FM77AV20EX) || defined(_FM77AV20SX)
+ stat_kanjirom = true; // R/W : bit5, '0' = sub, '1' = main. FM-77 Only.
+#elif defined(_FM77_VARIANTS)
+ stat_fdmode_2hd = false; // R/W : bit6, '0' = 2HD, '1' = 2DD. FM-77 Only.
+ stat_kanjirom = true; // R/W : bit5, '0' = sub, '1' = main. FM-77 Only.
+#endif
+ write_signals(&firq_bus, 0);
+
+#if defined(HAS_DMA)
+ intstat_dma = false;
+ dma_addr = 0;
+#endif
+#if defined(_FM77AV_VARIANTS)
+ reg_fd12 = 0xbc; // 0b10111100
+#endif
+#if defined(WITH_Z80)
+ if(z80 != NULL) z80->write_signal(SIG_CPU_BUSREQ, 0xffffffff, 0xffffffff);
+#endif
+ maincpu->write_signal(SIG_CPU_BUSREQ, 0, 0xffffffff);
+ maincpu->write_signal(SIG_CPU_HALTREQ, 0, 0xffffffff);
+
+
+#if !defined(_FM8)
register_event(this, EVENT_TIMERIRQ_ON, 10000.0 / 4.9152, true, &event_timerirq); // TIMER IRQ
+#endif
+ bootmode = config.boot_mode & 3;
memset(io_w_latch, 0xff, 0x100);
-
- //mainmem->reset();
- //maincpu->write_signal(SIG_CPU_BUSREQ, 0, 1);
- //maincpu->reset();
}
+void FM7_MAINIO::reset_printer()
+{
+ lpt_slctin = false;
+ lpt_strobe = false;
+ // FD01
+ lpt_outdata = 0x00;
+ this->write_signals(&printer_strobe_bus, 0);
+ this->write_signals(&printer_select_bus, 0xffffffff);
+ this->write_signals(&printer_reset_bus, 0xffffffff);
+ register_event(this, EVENT_PRINTER_RESET_COMPLETED, 5.0 * 1000.0, false, NULL);
+ if(lpt_type == 0) {
+ printer->write_signal(SIG_PRINTER_STROBE, 0x00, 0xff);
+ }
+ lpt_busy = false;
+ lpt_error_inv = true;
+ lpt_ackng_inv = true;
+ lpt_pe = false;
+
+}
-void FM7_MAINIO::set_clockmode(uint8 flags)
+void FM7_MAINIO::set_clockmode(uint8_t flags)
{
bool f = clock_fast;
if((flags & FM7_MAINCLOCK_SLOW) != 0) {
}
if(f != clock_fast) {
this->write_signal(FM7_MAINIO_CLOCKMODE, clock_fast ? 1 : 0, 1);
- mainmem->write_signal(FM7_MAINIO_CLOCKMODE, clock_fast ? 1 : 0, 1);
}
}
-uint8 FM7_MAINIO::get_clockmode(void)
+uint8_t FM7_MAINIO::get_clockmode(void)
{
if(!clock_fast) return FM7_MAINCLOCK_SLOW;
return FM7_MAINCLOCK_HIGH;
}
-uint8 FM7_MAINIO::get_port_fd00(void)
+uint8_t FM7_MAINIO::get_port_fd00(void)
{
- uint8 ret = 0x7e; //0b01111110;
+ uint8_t ret = 0x7e; //0b01111110;
+#if defined(_FM8)
+ ret = 0xfe;
+#else
if(keyboard->read_data8(0x00) != 0) ret |= 0x80; // High bit.
- //if((keycode_7 & 0x100) != 0) ret |= 0x80; // High bit.
+#endif
if(clock_fast) ret |= 0x01; //0b00000001;
return ret;
}
-void FM7_MAINIO::set_port_fd00(uint8 data)
+void FM7_MAINIO::set_port_fd00(uint8_t data)
{
- drec->write_signal(SIG_DATAREC_OUT, data, 0x01);
- drec->write_signal(SIG_DATAREC_REMOTE, data, 0x02);
+ if(drec != NULL) {
+ drec->write_signal(SIG_DATAREC_MIC, data, 0x01);
+ drec->write_signal(SIG_DATAREC_REMOTE, data, 0x02);
+ }
+ lpt_slctin = ((data & 0x80) == 0);
+ lpt_strobe = ((data & 0x40) != 0);
+ this->write_signals(&printer_strobe_bus, lpt_strobe ? 0xffffffff : 0);
+ this->write_signals(&printer_select_bus, lpt_slctin ? 0xffffffff : 0);
+ if((lpt_type == 0) && (lpt_slctin)) {
+ printer->write_signal(SIG_PRINTER_STROBE, lpt_strobe ? 0xff : 0x00, 0xff);
+ }
}
-uint8 FM7_MAINIO::get_port_fd02(void)
+uint8_t FM7_MAINIO::get_port_fd02(void)
{
- uint8 ret;
- // Still unimplemented printer.
- ret = (cmt_indat) ? 0xff : 0x7f; // CMT
+ uint8_t ret;
+ bool ack_bak = lpt_ackng_inv;
+
+ ret = (cmt_indat) ? 0xff : 0x7f; // CMT
+ if(lpt_type == 0) {
+ lpt_busy = (printer->read_signal(SIG_PRINTER_BUSY) != 0);
+ lpt_error_inv = true;
+ lpt_ackng_inv = (printer->read_signal(SIG_PRINTER_ACK) != 0);
+ lpt_pe = false;
+ } else if((lpt_type == 1) || (lpt_type == 2)) {
+ lpt_pe = (joystick->read_data8(lpt_type + 1) != 0); // check joy port;
+ lpt_busy = true;
+ lpt_error_inv = true;
+ lpt_ackng_inv = true;
+ } else {
+ lpt_busy = true;
+ lpt_error_inv = true;
+ lpt_ackng_inv = true;
+ lpt_pe = true;
+ }
+ ret &= (lpt_busy) ? 0xff : ~0x01;
+ ret &= (lpt_error_inv) ? 0xff : ~0x02;
+ ret &= (lpt_ackng_inv) ? 0xff : ~0x04;
+ ret &= (lpt_pe) ? 0xff : ~0x08;
+ ret &= (lpt_det1) ? 0xff : ~0x10;
+ ret &= (lpt_det2) ? 0xff : ~0x20;
+ if((lpt_ackng_inv == true) && (ack_bak == false)) set_irq_printer(true);
return ret;
}
-void FM7_MAINIO::set_port_fd02(uint8 val)
+void FM7_MAINIO::set_port_fd02(uint8_t val)
{
+#if !defined(_FM8)
irqmask_reg0 = val;
bool syndetirq_bak = irqmask_syndet;
- bool rxrdyirq_bak = irqmask_rxrdy;
- bool txrdyirq_bak = irqmask_txrdy;
+ //bool rxrdyirq_bak = irqmask_rxrdy;
+ //bool txrdyirq_bak = irqmask_txrdy;
bool keyirq_bak = irqmask_keyboard;
- bool timerirq_bak = irqmask_timer;
- bool printerirq_bak = irqmask_printer;
- bool mfdirq_bak = irqmask_mfd;
+ //bool timerirq_bak = irqmask_timer;
+ //bool printerirq_bak = irqmask_printer;
+ //bool mfdirq_bak = irqmask_mfd;
// if((val & 0b00010000) != 0) {
if((val & 0x80) != 0) {
irqmask_syndet = true;
}
if(syndetirq_bak != irqmask_syndet) {
- set_irq_txrdy(intstat_syndet);
+ set_irq_txrdy(irqreq_syndet);
}
if((val & 0x40) != 0) {
irqmask_rxrdy = false;
} else {
irqmask_rxrdy = true;
}
- if(rxrdyirq_bak != irqmask_rxrdy) {
- set_irq_rxrdy(intstat_rxrdy);
- }
+// if(rxrdyirq_bak != irqmask_rxrdy) {
+// set_irq_rxrdy(irqreq_rxrdy);
+// }
if((val & 0x20) != 0) {
irqmask_txrdy = false;
} else {
irqmask_txrdy = true;
}
- if(txrdyirq_bak != irqmask_txrdy) {
- set_irq_txrdy(intstat_txrdy);
- }
+// if(txrdyirq_bak != irqmask_txrdy) {
+ // set_irq_txrdy(irqreq_txrdy);
+// }
if((val & 0x10) != 0) {
irqmask_mfd = false;
} else {
irqmask_mfd = true;
}
- if(mfdirq_bak != irqmask_mfd) {
- set_irq_mfd(irqstat_fdc);
- }
if((val & 0x04) != 0) {
irqmask_timer = false;
} else {
irqmask_timer = true;
}
- if(timerirq_bak != irqmask_timer) {
- set_irq_timer(irqstat_timer);
- }
+// if(timerirq_bak != irqmask_timer) {
+// set_irq_timer(false);
+// }
if((val & 0x02) != 0) {
irqmask_printer = false;
} else {
irqmask_printer = true;
}
- if(printerirq_bak != irqmask_printer) {
- set_irq_printer(irqstat_printer);
- }
+// if(printerirq_bak != irqmask_printer) {
+// set_irq_printer(irqreq_printer);
+// }
if((val & 0x01) != 0) {
irqmask_keyboard = false;
}
if(keyirq_bak != irqmask_keyboard) {
display->write_signal(SIG_FM7_SUB_KEY_MASK, irqmask_keyboard ? 1 : 0, 1);
- if(irqmask_keyboard) {
- irqstat_reg0 |= 0x01;
- irqstat_keyboard = false;
- do_irq();
- } else {
- set_irq_keyboard(false);
- }
+ set_irq_keyboard(irqreq_keyboard);
}
+#endif
return;
}
void FM7_MAINIO::set_irq_syndet(bool flag)
{
bool backup = intstat_syndet;
+ irqreq_syndet = flag;
+#if defined(_FM8)
+ intstat_syndet = flag;
+#else
if(flag && !(irqmask_syndet)) {
//irqstat_reg0 &= ~0x80; //~0x20;
intstat_syndet = true;
// irqstat_reg0 |= 0x80;
intstat_syndet = false;
}
+#endif
if(backup != intstat_syndet) do_irq();
- //printf("IRQ TIMER: %02x MASK=%d\n", irqstat_reg0, irqmask_timer);
}
void FM7_MAINIO::set_irq_rxrdy(bool flag)
{
bool backup = intstat_rxrdy;
+ irqreq_rxrdy = flag;
+#if defined(_FM8)
+ intstat_rxrdy = flag;
+#else
if(flag && !(irqmask_rxrdy)) {
//irqstat_reg0 &= ~0x40; //~0x20;
intstat_rxrdy = true;
//irqstat_reg0 |= 0x40;
intstat_rxrdy = false;
}
+#endif
if(backup != intstat_rxrdy) do_irq();
- //printf("IRQ TIMER: %02x MASK=%d\n", irqstat_reg0, irqmask_timer);
}
void FM7_MAINIO::set_irq_txrdy(bool flag)
{
bool backup = intstat_txrdy;
+ irqreq_txrdy = flag;
+#if defined(_FM8)
+ intstat_txrdy = flag;
+#else
if(flag && !(irqmask_txrdy)) {
//irqstat_reg0 &= ~0x20; //~0x20;
intstat_txrdy = true;
//irqstat_reg0 |= 0x20;
intstat_txrdy = false;
}
+#endif
if(backup != intstat_txrdy) do_irq();
- //printf("IRQ TIMER: %02x MASK=%d\n", irqstat_reg0, irqmask_timer);
}
void FM7_MAINIO::set_irq_timer(bool flag)
{
- uint8 backup = irqstat_reg0;
- if(flag && !(irqmask_timer)) {
+#if !defined(_FM8)
+ if(flag) {
irqstat_reg0 &= 0xfb; //~0x04;
irqstat_timer = true;
} else {
irqstat_reg0 |= 0x04;
irqstat_timer = false;
}
- if(backup != irqstat_reg0) do_irq();
- //printf("IRQ TIMER: %02x MASK=%d\n", irqstat_reg0, irqmask_timer);
+ do_irq();
+#endif
}
void FM7_MAINIO::set_irq_printer(bool flag)
{
- uint8 backup = irqstat_reg0;
+#if !defined(_FM8)
+ irqreq_printer = flag;
if(flag && !(irqmask_printer)) {
irqstat_reg0 &= ~0x02;
irqstat_printer = true;
- if(backup != irqstat_reg0) do_irq();
} else {
irqstat_reg0 |= 0x02;
irqstat_printer = false;
- if(backup != irqstat_reg0) do_irq();
}
-// if(!irqmask_printer || !flag) do_irq();
+ do_irq();
+#endif
}
void FM7_MAINIO::set_irq_keyboard(bool flag)
{
- uint8 backup = irqstat_reg0;
+ //uint8_t backup = irqstat_reg0;
//printf("MAIN: KEYBOARD: IRQ=%d MASK=%d\n", flag ,irqmask_keyboard);
- if(irqmask_keyboard) return;
- if(flag) {
+ irqreq_keyboard = flag;
+ if(flag && !irqmask_keyboard) {
irqstat_reg0 &= 0xfe;
irqstat_keyboard = true;
} else {
irqstat_reg0 |= 0x01;
irqstat_keyboard = false;
}
- //if(irqstat_reg0 != backup) do_irq();
do_irq();
}
void FM7_MAINIO::do_irq(void)
{
bool intstat;
+ uint32_t nval;
+#if defined(_FM8)
+ intstat = intstat_txrdy | intstat_rxrdy | intstat_syndet;
+#else
intstat = irqstat_timer | irqstat_keyboard | irqstat_printer;
intstat = intstat | irqstat_fdc;
intstat = intstat | intstat_opn | intstat_whg | intstat_thg;
intstat = intstat | intstat_txrdy | intstat_rxrdy | intstat_syndet;
intstat = intstat | intstat_mouse;
-
- //printf("%08d : IRQ: REG0=%02x FDC=%02x, stat=%d\n", SDL_GetTicks(), irqstat_reg0, irqstat_fdc, intstat);
- if(intstat) {
- maincpu->write_signal(SIG_CPU_IRQ, 1, 1);
- } else {
- maincpu->write_signal(SIG_CPU_IRQ, 0, 1);
- }
+# if defined(HAS_DMA)
+ intstat = intstat | intstat_dma;
+# endif
+#endif
+ nval = (intstat) ? 0xffffffff : 0;
+ write_signals(&irq_bus, nval);
}
void FM7_MAINIO::do_firq(void)
{
bool firq_stat;
- firq_stat = firq_break_key | firq_sub_attention;
- //printf("%08d : FIRQ: break=%d attn=%d stat = %d\n", SDL_GetTicks(), firq_break_key, firq_sub_attention, firq_stat);
- if(firq_stat) {
- maincpu->write_signal(SIG_CPU_FIRQ, 1, 1);
- } else {
- maincpu->write_signal(SIG_CPU_FIRQ, 0, 1);
- }
+ uint32_t nval;
+ firq_stat = firq_break_key | firq_sub_attention;
+ nval = (firq_stat) ? 0xffffffff : 0;
+ write_signals(&firq_bus, nval);
}
void FM7_MAINIO::do_nmi(bool flag)
{
- maincpu->write_signal(SIG_CPU_NMI, flag ? 1 : 0, 1);
+ write_signals(&nmi_bus, (flag) ? 0xffffffff : 0);
}
}
-uint8 FM7_MAINIO::get_fd04(void)
+uint8_t FM7_MAINIO::get_fd04(void)
{
- uint8 val = 0x7c;
+ uint8_t val = 0x00;
+ bool f;
if(display->read_signal(SIG_DISPLAY_BUSY) != 0) val |= 0x80;
- if(!firq_break_key) val |= 0x02;
+
+ //f = keyboard->read_signal(SIG_FM7KEY_BREAK_KEY);
+ f = firq_break_key;
+ if(!f) val |= 0x02;
if(!firq_sub_attention) {
val |= 0x01;
}
- if(firq_sub_attention) set_sub_attention(false);
+#if defined(_FM77_VARIANTS)
+ if(stat_fdmode_2hd) val |= 0x40;
+ if(stat_kanjirom) val |= 0x20;
+ if(stat_400linecard) val |= 0x10;
+ if((display->read_signal(SIG_DISPLAY_EXTRA_MODE) & 0x04) != 0x00) val |= 0x04;
+#else
+ val |= 0x7c;
+#endif
+ if(firq_sub_attention) {
+ set_sub_attention(false);
+ //printf("Attention \n");
+ }
#if defined(_FM77AV_VARIANTS)
if(hotreset) {
if(mainmem->read_signal(FM7_MAINIO_INITROM_ENABLED) == 0) {
return val;
}
-void FM7_MAINIO::set_fd04(uint8 val)
+void FM7_MAINIO::set_fd04(uint8_t val)
{
// NOOP?
#if defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX)
display->write_signal(SIG_DISPLAY_EXTRA_MODE, val, 0xff);
-#endif
+ stat_kanjirom = ((val & 0x20) != 0);
+#elif defined(_FM77_VARIANTS)
+ display->write_signal(SIG_DISPLAY_EXTRA_MODE, val, 0xff);
+ stat_fdmode_2hd = ((val & 0x40) != 0);
+ stat_kanjirom = ((val & 0x20) != 0);
+ stat_400linecard = ((val & 0x10) != 0);
+#endif
}
// FD05
- uint8 FM7_MAINIO::get_fd05(void)
+ uint8_t FM7_MAINIO::get_fd05(void)
{
- uint8 val = 0x7e;
- //val = (sub_busy) ? 0xfe : 0x7e;
+ uint8_t val = 0x7e;
if(display->read_signal(SIG_DISPLAY_BUSY) != 0) val |= 0x80;
if(!extdet_neg) val |= 0x01;
- //printf("FD05: READ: %d VAL=%02x\n", SDL_GetTicks(), val);
return val;
}
- void FM7_MAINIO::set_fd05(uint8 val)
+ void FM7_MAINIO::set_fd05(uint8_t val)
{
sub_cancel = ((val & 0x40) != 0) ? true : false;
sub_halt = ((val & 0x80) != 0) ? true : false;
sub_cancel_bak = sub_cancel;
#ifdef WITH_Z80
if((val & 0x01) != 0) {
- maincpu->write_signal(SIG_CPU_BUSREQ, 1, 1);
- z80->write_signal(SIG_CPU_BUSREQ, 0, 1);
+ maincpu->write_signal(SIG_CPU_HALTREQ, 1, 1);
+ req_z80run = true;
} else {
- maincpu->write_signal(SIG_CPU_BUSREQ, 0, 1);
- z80->write_signal(SIG_CPU_BUSREQ, 1, 1);
+ req_z80run = false;
+ if(z80 != NULL) z80->write_signal(SIG_CPU_BUSREQ, 1, 1);
}
#endif
}
void FM7_MAINIO::write_fd0f(void)
{
+#if defined(_FM8)
+ if((config.dipswitch & FM7_DIPSW_FM8_PROTECT_FD0F) != 0) {
+ return;
+ }
+ bootmode = 1; // DOS : Where BUBBLE?
+ mainmem->write_signal(FM7_MAINIO_BOOTMODE, bootmode, 0xffffffff);
+ mainmem->write_signal(FM7_MAINIO_IS_BASICROM, 0, 0xffffffff);
+#endif
mainmem->write_signal(FM7_MAINIO_PUSH_FD0F, 0, 0xffffffff);
}
-uint8 FM7_MAINIO::read_fd0f(void)
+uint8_t FM7_MAINIO::read_fd0f(void)
{
+#if defined(_FM8)
+ if((config.dipswitch & FM7_DIPSW_FM8_PROTECT_FD0F) != 0) {
+ return 0xff;
+ }
+ bootmode = 0; // BASIC
+ mainmem->write_signal(FM7_MAINIO_BOOTMODE, bootmode, 0xffffffff);
+ mainmem->write_signal(FM7_MAINIO_IS_BASICROM, 0xffffffff, 0xffffffff);
+#endif
mainmem->write_signal(FM7_MAINIO_PUSH_FD0F, 0xffffffff, 0xffffffff);
return 0xff;
}
// Kanji ROM, FD20 AND FD21 (or SUBSYSTEM)
-void FM7_MAINIO::write_kanjiaddr_hi(uint8 addr)
+void FM7_MAINIO::write_kanjiaddr_hi(uint8_t addr)
{
if(!connect_kanjiroml1) return;
- kaddress.b.h = addr;
+#if defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX) || \
+ defined(_FM77AV20) || defined(_FM77AV20EX) || defined(_FM77AV20SX)
+ if(!stat_kanjirom) return;
+#endif
+ kanjiclass1->write_data8(KANJIROM_ADDR_HI, addr);
return;
}
-void FM7_MAINIO::write_kanjiaddr_lo(uint8 addr)
+void FM7_MAINIO::write_kanjiaddr_lo(uint8_t addr)
{
if(!connect_kanjiroml1) return;
- kaddress.b.l = addr;
+#if defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX) || \
+ defined(_FM77AV20) || defined(_FM77AV20EX) || defined(_FM77AV20SX)
+ if(!stat_kanjirom) return;
+#endif
+ kanjiclass1->write_data8(KANJIROM_ADDR_LO, addr);
return;
}
-uint8 FM7_MAINIO::read_kanjidata_left(void)
+uint8_t FM7_MAINIO::read_kanjidata_left(void)
{
- uint32 addr;
-
if(!connect_kanjiroml1) return 0xff;
- addr = kaddress.w.l;
- addr = addr << 1;
+#if defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX) || \
+ defined(_FM77AV20) || defined(_FM77AV20EX) || defined(_FM77AV20SX)
+ if(!stat_kanjirom) return 0xff;
+#endif
//printf("KANJI MAIN CLASS1 ADDR: %05x\n", kaddress.w.l);
if(kanjiclass1) {
- return kanjiclass1->read_data8(addr);
+ return kanjiclass1->read_data8(KANJIROM_DATA_HI);
} else {
return 0xff;
}
}
-uint8 FM7_MAINIO::read_kanjidata_right(void)
+uint8_t FM7_MAINIO::read_kanjidata_right(void)
{
- uint32 addr;
-
if(!connect_kanjiroml1) return 0xff;
- addr = kaddress.w.l;
- addr = (addr << 1) + 1;
+#if defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX) || \
+ defined(_FM77AV20) || defined(_FM77AV20EX) || defined(_FM77AV20SX)
+ if(!stat_kanjirom) return 0xff;
+#endif
if(kanjiclass1) {
- return kanjiclass1->read_data8(addr);
+ return kanjiclass1->read_data8(KANJIROM_DATA_LO);
} else {
return 0xff;
}
}
-#ifdef CAPABLE_KANJICLASS2
+#ifdef CAPABLE_KANJI_CLASS2
// Kanji ROM, FD20 AND FD21 (or SUBSYSTEM)
-void FM7_MAINIO::write_kanjiaddr_hi_l2(uint8 addr)
+void FM7_MAINIO::write_kanjiaddr_hi_l2(uint8_t addr)
{
if(!connect_kanjiroml2) return;
- kaddress_l2.b.h = addr;
+ if(!stat_kanjirom) return;
+ kanjiclass2->write_data8(KANJIROM_ADDR_HI, addr);
return;
}
-void FM7_MAINIO::write_kanjiaddr_lo_l2(uint8 addr)
+void FM7_MAINIO::write_kanjiaddr_lo_l2(uint8_t addr)
{
if(!connect_kanjiroml2) return;
- kaddress_l2.b.l = addr;
+ if(!stat_kanjirom) return;
+ kanjiclass2->write_data8(KANJIROM_ADDR_LO, addr);
+
return;
}
-uint8 FM7_MAINIO::read_kanjidata_left_l2(void)
+uint8_t FM7_MAINIO::read_kanjidata_left_l2(void)
{
- uint32 addr;
-
if(!connect_kanjiroml2) return 0xff;
- addr = kaddress.w.l;
- addr = addr << 1;
+ if(!stat_kanjirom) return 0xff;
+
if(kanjiclass2) {
- return kanjiclass2->read_data8(addr);
+ return kanjiclass2->read_data8(KANJIROM_DATA_HI);
} else {
return 0xff;
}
}
-uint8 FM7_MAINIO::read_kanjidata_right_l2(void)
+uint8_t FM7_MAINIO::read_kanjidata_right_l2(void)
{
- uint32 addr;
-
if(!connect_kanjiroml2) return 0xff;
- addr = kaddress_l2.w.l;
- addr = (addr << 1) + 0x01;
+ if(!stat_kanjirom) return 0xff;
+
if(kanjiclass2) {
- return kanjiclass2->read_data8(addr);
+ return kanjiclass2->read_data8(KANJIROM_DATA_LO);
} else {
return 0xff;
}
#endif
-uint32 FM7_MAINIO::read_signal(int id)
+uint32_t FM7_MAINIO::read_signal(int id)
{
- uint32 retval;
+ uint32_t retval;
switch(id) {
case FM7_MAINIO_KEYBOARDIRQ_MASK:
retval = (irqmask_keyboard) ? 0xffffffff : 0x00000000;
}
-void FM7_MAINIO::write_signal(int id, uint32 data, uint32 mask)
+void FM7_MAINIO::write_signal(int id, uint32_t data, uint32_t mask)
{
bool val_b;
val_b = ((data & mask) != 0);
} else {
clock_fast = false;
}
- {
- uint32 clocks = 1794000;
-#if defined(_FM77AV_VARIANTS) || defined(_FM77_VARIANTS)
- if(mmr_enabled) {
- if(mmr_fast) {
- if(clock_fast) {
- clocks = 2016000; // Hz
- } else {
- clocks = 1230502; // (2016 * 1095 / 1794)[KHz]
- }
- } else {
- if(clock_fast) {
- clocks = 1565000; // Hz
- } else {
- clocks = 955226; // (1565 * 1095 / 1794)[KHz]
- }
- }
- } else {
- if(clock_fast) {
- clocks = 1794000; // Hz
- } else {
- clocks = 1095000; // Hz
- }
- }
-#else // 7/8
- if(clock_fast) {
- clocks = 1794000; // Hz
- } else {
- clocks = 1095000; // Hz
- }
-#endif
- p_vm->set_cpu_clock(this->maincpu, clocks);
- display->write_signal(SIG_DISPLAY_CLOCK, clock_fast ? 1 : 0, 1);
- }
+ this->write_signals(&clock_status, clock_fast ? 0xffffffff : 0);
break;
case FM7_MAINIO_CMT_RECV: // FD02
cmt_indat = val_b ^ cmt_invert;
case FM7_MAINIO_LPTIRQ: //
set_irq_printer(val_b);
break;
+ case FM7_MAINIO_LPT_BUSY:
+ lpt_busy = val_b;
+ break;
+ case FM7_MAINIO_LPT_ERROR:
+ lpt_error_inv = val_b;
+ break;
+ case FM7_MAINIO_LPT_ACK:
+ {
+ bool f = lpt_ackng_inv;
+ lpt_ackng_inv = val_b;
+ if((lpt_ackng_inv == true) && (f == false)) set_irq_printer(true);
+ }
+ break;
+ case FM7_MAINIO_LPT_PAPER_EMPTY:
+ lpt_busy = val_b;
+ break;
+ case FM7_MAINIO_LPT_DET1:
+ lpt_det1 = val_b;
+ break;
+ case FM7_MAINIO_LPT_DET2:
+ lpt_det2 = val_b;
+ break;
case FM7_MAINIO_KEYBOARDIRQ: //
set_irq_keyboard(val_b);
break;
- case SIG_FM7KEY_PUSH_DATA: //
- keycode_7 = data & 0x1ff;
- break;
// FD04
case FM7_MAINIO_PUSH_BREAK:
set_break_key(val_b);
case FM7_MAINIO_BEEP:
set_beep_oneshot();
break;
- case FM7_MAINIO_JOYPORTA_CHANGED:
- joyport_a = data & mask;
+ case FM7_MAINIO_PSG_IRQ:
break;
- case FM7_MAINIO_JOYPORTB_CHANGED:
- joyport_b = data & mask;
+#if defined(WITH_Z80)
+ case FM7_MAINIO_RUN_Z80:
+ if((req_z80run)/* && (val_b) */) {
+ if(z80 != NULL) z80->write_signal(SIG_CPU_BUSREQ, 0, 1);
+ z80_run = true;
+ //z80->reset(); // OK?
+ }
break;
- case FM7_MAINIO_PSG_IRQ:
+ case FM7_MAINIO_RUN_6809:
+ if(!(req_z80run) /* && (val_b) */ && (z80_run)) {
+ z80_run = false;
+ // Wait dead cycle?
+ maincpu->write_signal(SIG_CPU_HALTREQ, 0, 1);
+ }
break;
+#endif
+#if !defined(_FM8)
case FM7_MAINIO_OPN_IRQ:
if(!connect_opn) break;
intstat_opn = val_b;
do_irq();
- break;
+ break;
case FM7_MAINIO_WHG_IRQ:
if(!connect_whg) break;
intstat_whg = val_b;
do_irq();
- break;
+ break;
case FM7_MAINIO_THG_IRQ:
if(!connect_thg) break;
intstat_thg = val_b;
do_irq();
- break;
+ break;
+#endif
case FM7_MAINIO_FDC_DRQ:
set_drq_mfd(val_b);
break;
case FM7_MAINIO_FDC_IRQ:
set_irq_mfd(val_b);
break;
- case FM7_MAINIO_KANJI1_ADDR_HIGH:
- kaddress.b.h = data;
+#if defined(HAS_DMA)
+ case FM7_MAINIO_DMA_INT:
+ intstat_dma = val_b;
+ do_irq();
break;
- case FM7_MAINIO_KANJI1_ADDR_LOW:
- kaddress.b.l = data;
+#endif
+#if defined(_FM77AV_VARIANTS)
+ case SIG_DISPLAY_DISPLAY:
+ if(val_b) {
+ reg_fd12 |= 0x02;
+ } else {
+ reg_fd12 &= ~0x02;
+ }
break;
-#if defined(CAPABLE_KANJI_CLASS2)
- case FM7_MAINIO_KANJI2_ADDR_HIGH:
- kaddress_l2.b.h = data;
+ case SIG_DISPLAY_VSYNC:
+ if(val_b) {
+ reg_fd12 |= 0x01;
+ } else {
+ reg_fd12 &= ~0x01;
+ }
break;
- case FM7_MAINIO_KANJI2_ADDR_LOW:
- kaddress_l2.b.l = data;
+ case SIG_DISPLAY_MODE320:
+ if(val_b) {
+ reg_fd12 |= 0x40;
+ } else {
+ reg_fd12 &= ~0x40;
+ }
break;
-#endif
+#endif
}
-
}
- uint8 FM7_MAINIO::get_irqstat_fd03(void)
+ uint8_t FM7_MAINIO::get_irqstat_fd03(void)
{
- uint8 val;
- bool extirq = false;
-
+ uint8_t val;
+ bool extirq;
+#if !defined(_FM8)
extirq = irqstat_fdc | intstat_opn | intstat_whg | intstat_thg;
extirq = extirq | intstat_syndet | intstat_rxrdy | intstat_txrdy;
+# if defined(HAS_DMA)
+ extirq = extirq | intstat_dma;
+# endif
if(extirq) {
irqstat_reg0 &= ~0x08;
} else {
irqstat_reg0 |= 0x08;
}
val = irqstat_reg0 | 0xf0;
- set_irq_timer(false);
- set_irq_printer(false);
+ // Not call do_irq() twice. 20151221
+ irqstat_timer = false;
+ irqstat_printer = false;
+ irqstat_reg0 |= 0x06;
+ do_irq();
+ //this->out_debug_log(_T("IO: Check IRQ Status."));
return val;
+#else
+ return 0xff;
+#endif
}
-uint8 FM7_MAINIO::get_extirq_fd17(void)
+uint8_t FM7_MAINIO::get_extirq_fd17(void)
{
- uint8 val = 0xff;
+ uint8_t val = 0xff;
+#if !defined(_FM8)
if(intstat_opn && connect_opn) val &= ~0x08;
if(intstat_mouse) val &= ~0x04;
- //if(!intstat_opn && !intstat_mouse) do_irq(false);
+#endif
return val;
}
-void FM7_MAINIO::set_ext_fd17(uint8 data)
+void FM7_MAINIO::set_ext_fd17(uint8_t data)
{
+#if !defined(_FM8)
if((data & 0x04) != 0) {
mouse_enable = true;
} else {
mouse_enable = false;
}
-
+#endif
}
+
#if defined(_FM77AV_VARIANTS)
// FD12
-uint8 FM7_MAINIO::subsystem_read_status(void)
+uint8_t FM7_MAINIO::subsystem_read_status(void)
{
- uint8 retval;
- retval = (display->read_signal(SIG_DISPLAY_MODE320) != 0) ? 0x40 : 0;
- retval |= display->read_signal(SIG_DISPLAY_VSYNC);
- retval |= display->read_signal(SIG_DISPLAY_DISPLAY);
- retval |= ~0x43;
- return retval;
+ return reg_fd12;
}
#endif
-uint32 FM7_MAINIO::read_io8(uint32 addr)
+uint32_t FM7_MAINIO::read_io8(uint32_t addr)
{ // This is only for debug.
addr = addr & 0xfff;
if(addr < 0x100) {
return io_w_latch[addr];
} else if(addr < 0x500) {
- uint32 ofset = addr & 0xff;
+ uint32_t ofset = addr & 0xff;
uint opnbank = (addr - 0x100) >> 8;
return opn_regs[opnbank][ofset];
} else if(addr < 0x600) {
return 0xff;
}
+uint32_t FM7_MAINIO::read_dma_io8(uint32_t addr)
+{
+ return this->read_data8(addr & 0xff);
+}
+
+uint32_t FM7_MAINIO::read_dma_data8(uint32_t addr)
+{
+ return this->read_data8(addr & 0xff);
+}
-uint32 FM7_MAINIO::read_data8(uint32 addr)
+uint32_t FM7_MAINIO::read_data8(uint32_t addr)
{
- uint32 retval;
- uint32 mmr_segment;
+ uint32_t retval;
+ uint32_t mmr_segment;
if(addr < FM7_MAINIO_IS_BASICROM) {
addr = addr & 0xff;
retval = 0xff;
#if defined(HAS_MMR)
if((addr < 0x90) && (addr >= 0x80)) {
mmr_segment = mainmem->read_data8(FM7_MAINIO_MMR_SEGMENT);
-# if defined(_FM77AV40) || defined(_FM77AV40SX) || defined(_FM77AV40EX)
- defined(_FM77AV20) || defined(_FM77AV20SX) || defined(_FM77AV20EX)
+# if defined(_FM77AV40) || defined(_FM77AV40SX) || defined(_FM77AV40EX) || \
+ defined(_FM77AV20) || defined(_FM77AV20SX) || defined(_FM77AV20EX)
mmr_segment &= 0x07;
# else
mmr_segment &= 0x03;
// if((addr >= 0x0006) && !(addr == 0x1f) && !(addr == 0x0b)) printf("MAINIO: READ: %08x \n", addr);
switch(addr) {
case 0x00: // FD00
- retval = (uint32) get_port_fd00();
+ retval = (uint32_t) get_port_fd00();
break;
case 0x01: // FD01
+#if !defined(_FM8)
retval = keyboard->read_data8(0x01) & 0xff;
- //retval = keycode_7 & 0xff;
- //set_irq_keyboard(false);
+#endif
break;
case 0x02: // FD02
- retval = (uint32) get_port_fd02();
+ retval = (uint32_t) get_port_fd02();
break;
case 0x03: // FD03
- retval = (uint32) get_irqstat_fd03();
+#if !defined(_FM8)
+ retval = (uint32_t) get_irqstat_fd03();
+#endif
break;
case 0x04: // FD04
- retval = (uint32) get_fd04();
+ retval = (uint32_t) get_fd04();
break;
case 0x05: // FD05
- retval = (uint32) get_fd05();
+ retval = (uint32_t) get_fd05();
break;
case 0x06: // RS-232C
case 0x07:
break;
#endif
case 0x0e: // PSG DATA
- retval = (uint32) get_psg();
+ retval = (uint32_t) get_psg();
//printf("PSG DATA READ val=%02x\n", retval);
break;
case 0x0f: // FD0F
read_fd0f();
retval = 0xff;
break;
+#if defined(_FM8)
+ case 0x10:
+ case 0x11:
+ case 0x12:
+ case 0x13:
+ case 0x14:
+ case 0x15:
+ case 0x16:
+ case 0x17:
+ retval = bubble_casette[0]->read_data8(addr);
+ break;
+#else
#if defined(_FM77AV_VARIANTS)
case 0x12:
retval = subsystem_read_status();
break;
#endif
- case 0x15: // OPN CMD
//printf("OPN CMD READ \n");
break;
case 0x16: // OPN DATA
- retval = (uint32) get_opn(0);
- //printf("OPN DATA READ val=%02x\n", retval);
+ retval = (uint32_t) get_opn(0);
break;
case 0x17:
- retval = (uint32) get_extirq_fd17();
+ retval = (uint32_t) get_extirq_fd17();
break;
+#endif
case 0x18: // FDC: STATUS
- retval = (uint32) get_fdc_stat();
+ retval = (uint32_t) get_fdc_stat();
//printf("FDC: READ STATUS %02x PC=%04x\n", retval, maincpu->get_pc());
break;
case 0x19: // FDC: Track
- retval = (uint32) get_fdc_track();
+ retval = (uint32_t) get_fdc_track();
//printf("FDC: READ TRACK REG %02x\n", retval);
break;
case 0x1a: // FDC: Sector
- retval = (uint32) get_fdc_sector();
+ retval = (uint32_t) get_fdc_sector();
//printf("FDC: READ SECTOR REG %02x\n", retval);
break;
case 0x1b: // FDC: Data
- retval = (uint32) get_fdc_data();
+ retval = (uint32_t) get_fdc_data();
break;
case 0x1c:
- retval = (uint32) get_fdc_fd1c();
+ retval = (uint32_t) get_fdc_fd1c();
//printf("FDC: READ HEAD REG %02x\n", retval);
break;
case 0x1d:
- retval = (uint32) get_fdc_motor();
+ retval = (uint32_t) get_fdc_motor();
+ //printf("FDC: READ MOTOR REG %02x\n", retval);
+ break;
+ case 0x1e:
+ retval = (uint32_t) get_fdc_fd1e();
//printf("FDC: READ MOTOR REG %02x\n", retval);
break;
case 0x1f:
- retval = (uint32) fdc_getdrqirq();
+ retval = (uint32_t) fdc_getdrqirq();
break;
case 0x22: // Kanji ROM
- retval = (uint32) read_kanjidata_left();
+ retval = (uint32_t) read_kanjidata_left();
break;
case 0x23: // Kanji ROM
- retval = (uint32) read_kanjidata_right();
+ retval = (uint32_t) read_kanjidata_right();
+ break;
+#if defined(CAPABLE_JCOMMCARD)
+ case 0x28:
+ case 0x29:
+ case 0x2a:
+ case 0x2b:
+ if(jcommcard != NULL) {
+ retval = (uint32_t)(jcommcard->read_io8(addr));
+ } else {
+ retval = 0xff;
+ }
break;
+#endif
#if defined(CAPABLE_KANJI_CLASS2)
case 0x2e: // Kanji ROM Level2
- retval = (uint32) read_kanjidata_left_l2();
+ retval = (uint32_t) read_kanjidata_left_l2();
break;
case 0x2f: // Kanji ROM Level2
- retval = (uint32) read_kanjidata_right_l2();
+ retval = (uint32_t) read_kanjidata_right_l2();
break;
#endif
+#if !defined(_FM8)
case 0x37: // Multi page
- //retval = (uint32)display->read_data8(DISPLAY_ADDR_MULTIPAGE);
+ //retval = (uint32_t)display->read_data8(DISPLAY_ADDR_MULTIPAGE);
break;
case 0x45: // WHG CMD
break;
case 0x46: // WHG DATA
- retval = (uint32) get_opn(1);
+ retval = (uint32_t) get_opn(1);
break;
case 0x47:
- retval = (uint32) get_extirq_whg();
+ retval = (uint32_t) get_extirq_whg();
break;
case 0x51: // THG CMD
break;
case 0x52: // THG DATA
- retval = (uint32) get_opn(2);
+ retval = (uint32_t) get_opn(2);
break;
case 0x53:
- retval = (uint32) get_extirq_thg();
+ retval = (uint32_t) get_extirq_thg();
break;
+#endif
#if defined(HAS_MMR)
case 0x93:
retval = 0x3e;
if(mainmem->read_signal(FM7_MAINIO_MMR_ENABLED) != 0) retval |= 0x80;
break;
#endif
+#if defined(_FM77AV40SX) || defined(_FM77AV40EX)
+ case 0x95:
+ retval = 0x77;
+ if(mainmem->read_signal(FM7_MAINIO_FASTMMR_ENABLED) != 0) retval |= 0x08;
+ if(mainmem->read_signal(FM7_MAINIO_EXTROM) != 0) retval |= 0x80;
+ break;
+#endif
+#if defined(HAS_DMA)
+ case 0x98:
+ retval = dma_addr;
+ break;
+ case 0x99:
+ retval = dmac->read_data8(dma_addr);
+ break;
+#endif
default:
- //printf("MAIN: Read another I/O Addr=%08x\n", addr);
break;
}
+#if !defined(_FM8)
if((addr < 0x40) && (addr >= 0x38)) {
addr = (addr - 0x38) + FM7_SUBMEM_OFFSET_DPALETTE;
- return (uint32) display->read_data8(addr);
+ return (uint32_t) display->read_data8(addr);
}
+#endif
// Another:
return retval;
} else if(addr == FM7_MAINIO_CLOCKMODE) {
- return (uint32)get_clockmode();
+ return (uint32_t)get_clockmode();
}
#if defined(_FM77AV_VARIANTS)
else if(addr == FM7_MAINIO_SUBMONITOR_ROM) {
retval = sub_monitor_type & 0x03;
return retval;
} else if(addr == FM7_MAINIO_SUBMONITOR_RAM) {
-#if defined(_FM77AV40) || defined(_FM77AV40SX) || defined(_FM77AV40EX)
+#if defined(_FM77AV40) || defined(_FM77AV40SX) || defined(_FM77AV40EX) || \
+ defined(_FM77AV20) || defined(_FM77AV20SX) || defined(_FM77AV20EX)
retval = ((sub_monitor_type & 0x04) != 0) ? 0xffffffff : 0x00000000;
#else
retval = 0;
return retval;
}
#endif
-#if defined(_FM77AV40) || defined(_FM77AV40SX) || defined(_FM77AV40EX)
- else if(addr == FM7_MAINIO_EXTBANK) {
- } else if(addr == FM7_MAINIO_EXTROM) {
- }
-#endif
//if((addr >= 0x0006) && (addr != 0x1f)) printf("MAINIO: READ: %08x DATA=%08x\n", addr);
return 0xff;
}
-void FM7_MAINIO::write_data8(uint32 addr, uint32 data)
+void FM7_MAINIO::write_dma_io8(uint32_t addr, uint32_t data)
+{
+ this->write_data8(addr & 0xff, data);
+}
+
+void FM7_MAINIO::write_dma_data8(uint32_t addr, uint32_t data)
+{
+ this->write_data8(addr & 0xff, data);
+}
+
+
+void FM7_MAINIO::write_data8(uint32_t addr, uint32_t data)
{
bool flag;
- uint32 mmr_segment;
+ uint32_t mmr_segment;
if(addr < FM7_MAINIO_IS_BASICROM) {
addr = addr & 0xff;
io_w_latch[addr] = data;
#if defined(HAS_MMR)
if((addr < 0x90) && (addr >= 0x80)) {
mmr_segment = mainmem->read_data8(FM7_MAINIO_MMR_SEGMENT);
-# if defined(_FM77AV40) || defined(_FM77AV40SX) || defined(_FM77AV40EX)
- defined(_FM77AV20) || defined(_FM77AV20SX) || defined(_FM77AV20EX)
+# if defined(_FM77AV40) || defined(_FM77AV40SX) || defined(_FM77AV40EX) || \
+ defined(_FM77AV20) || defined(_FM77AV20SX) || defined(_FM77AV20EX)
mmr_segment &= 0x07;
# else
mmr_segment &= 0x03;
#endif
switch(addr) {
case 0x00: // FD00
- set_port_fd00((uint8)data);
+ set_port_fd00((uint8_t)data);
return;
break;
case 0x01: // FD01
- // set_lptdata_fd01((uint8)data);
+ lpt_outdata = (uint8_t)data;
+ switch(lpt_type) {
+ case 0: // Write to file
+ printer->write_signal(SIG_PRINTER_DATA, data, 0xff);
+ break;
+ case 1:
+ case 2:
+ joystick->write_data8(0x01, data);
+ break;
+ }
break;
case 0x02: // FD02
- set_port_fd02((uint8)data);
+ set_port_fd02((uint8_t)data);
break;
case 0x03: // FD03
set_beep(data);
break;
case 0x04: // FD04
- // set_flags_fd04(data);
+ set_fd04(data);
break;
case 0x05: // FD05
- set_fd05((uint8)data);
+ set_fd05((uint8_t)data);
break;
case 0x06: // RS-232C
case 0x07:
case 0x0f: // FD0F
write_fd0f();
break;
+#if defined(_FM8)
+ case 0x10:
+ case 0x11:
+ case 0x12:
+ case 0x13:
+ case 0x14:
+ case 0x15:
+ case 0x16:
+ case 0x17:
+ bubble_casette[0]->write_data8(addr, data);
+ break;
+#else
#if defined(_FM77AV_VARIANTS)
case 0x10:
flag = ((data & 0x02) == 0) ? true : false;
break;
case 0x12:
display->write_signal(SIG_DISPLAY_MODE320, data, 0x40);
+ reg_fd12 &= ~0x40;
+ reg_fd12 |= (data & 0x40);
break;
case 0x13:
sub_monitor_type = data & 0x07;
- //if(sub_monitor_type != sub_monitor_bak) {
- display->write_signal(SIG_FM7_SUB_BANK, sub_monitor_type, 0x07);
- //}
- //sub_monitor_bak = sub_monitor_type;
+ display->write_signal(SIG_FM7_SUB_BANK, sub_monitor_type, 0x07);
break;
#endif
case 0x15: // OPN CMD
set_opn(0, data);
break;
case 0x17:
- set_ext_fd17((uint8)data);
+ set_ext_fd17((uint8_t)data);
break;
+#endif
case 0x18: // FDC: COMMAND
- set_fdc_cmd((uint8)data);
+ set_fdc_cmd((uint8_t)data);
//printf("FDC: WRITE CMD %02x\n", data);
break;
case 0x19: // FDC: Track
- set_fdc_track((uint8)data);
+ set_fdc_track((uint8_t)data);
//printf("FDC: WRITE TRACK REG %02x\n", data);
break;
case 0x1a: // FDC: Sector
- set_fdc_sector((uint8)data);
+ set_fdc_sector((uint8_t)data);
//printf("FDC: WRITE SECTOR REG %02x\n", data);
break;
case 0x1b: // FDC: Data
- set_fdc_data((uint8)data);
+ set_fdc_data((uint8_t)data);
break;
case 0x1c:
- set_fdc_fd1c((uint8)data);
+ set_fdc_fd1c((uint8_t)data);
//printf("FDC: WRITE HEAD REG %02x\n", data);
break;
case 0x1d:
- set_fdc_fd1d((uint8)data);
+ set_fdc_fd1d((uint8_t)data);
//printf("FDC: WRITE MOTOR REG %02x\n", data);
break;
+ case 0x1e:
+ set_fdc_fd1e((uint8_t)data);
+ break;
case 0x1f: // ??
return;
break;
case 0x20: // Kanji ROM
+ write_kanjiaddr_hi((uint8_t)data);
+ break;
case 0x2c: // Kanji ROM(DUP)
- write_kanjiaddr_hi((uint8)data);
#if defined(CAPABLE_KANJI_CLASS2)
- write_kanjiaddr_hi_l2((uint8)data);
+ write_kanjiaddr_hi_l2((uint8_t)data);
+#else
+ //write_kanjiaddr_hi((uint8_t)data);
#endif
break;
case 0x21: // Kanji ROM
+ write_kanjiaddr_lo((uint8_t)data);
+ break;
case 0x2d: // Kanji ROM(DUP)
- write_kanjiaddr_lo((uint8)data);
#if defined(CAPABLE_KANJI_CLASS2)
- write_kanjiaddr_lo_l2((uint8)data);
+ write_kanjiaddr_lo_l2((uint8_t)data);
+#else
+ //write_kanjiaddr_lo((uint8_t)data);
#endif
break;
+#if defined(CAPABLE_JCOMMCARD)
+ case 0x28:
+ case 0x29:
+ case 0x2a:
+ case 0x2b:
+ if(jcommcard != NULL) jcommcard->write_io8(addr, data);
+ break;
+#endif
+#if defined(CAPABLE_DICTROM)
+ case 0x2e: //
+ mainmem->write_signal(FM7_MAINIO_EXTBANK, data, 0xff);
+ break;
+#endif
#if defined(_FM77AV_VARIANTS)
case 0x30:
display->write_data8(FM7_SUBMEM_OFFSET_APALETTE_HI, data);
display->write_data8(FM7_SUBMEM_OFFSET_APALETTE_G, data);
break;
#endif
+#if !defined(_FM8)
case 0x37: // Multi page
display->write_signal(SIG_DISPLAY_MULTIPAGE, data, 0x00ff);
break;
break;
case 0x53:
break;
+#endif
#if defined(HAS_MMR)
case 0x90:
-#if defined(_FM77AV40) || defined(_FM77AV40SX) || defined(_FM77AV40EX)
+#if defined(_FM77AV40) || defined(_FM77AV40SX) || defined(_FM77AV40EX) || \
+ defined(_FM77AV20) || defined(_FM77AV20SX) || defined(_FM77AV20EX)
mmr_segment = data & 7;
#else
// printf("MMR SEGMENT: %02x\n", data & 3);
mmr_segment = data & 3;
#endif
- mainmem->write_data8(FM7_MAINIO_MMR_SEGMENT, (uint32)mmr_segment);
+ mainmem->write_data8(FM7_MAINIO_MMR_SEGMENT, (uint32_t)mmr_segment);
break;
case 0x92:
- window_offset = data & 0x00ff;
- mainmem->write_data8(FM7_MAINIO_WINDOW_OFFSET, (uint32)window_offset);
+ mainmem->write_data8(FM7_MAINIO_WINDOW_OFFSET, (uint32_t)(data & 0x00ff));
break;
case 0x93:
mainmem->write_signal(FM7_MAINIO_BOOTRAM_RW, data, 0x01);
mainmem->write_signal(FM7_MAINIO_WINDOW_ENABLED, data , 0x40);
- this->write_signal(FM7_MAINIO_CLOCKMODE, clock_fast ? 1 : 0, 1);
- mainmem->write_signal(FM7_MAINIO_CLOCKMODE, clock_fast ? 1 : 0, 1);
+ //this->write_signal(FM7_MAINIO_CLOCKMODE, clock_fast ? 1 : 0, 1);
+ //mainmem->write_signal(FM7_MAINIO_CLOCKMODE, clock_fast ? 1 : 0, 1);
mainmem->write_signal(FM7_MAINIO_MMR_ENABLED, data, 0x80);
//}
break;
#endif
+#if defined(_FM77AV40) || defined(_FM77AV40SX) || defined(_FM77AV40EX) || \
+ defined(_FM77AV20) || defined(_FM77AV20SX) || defined(_FM77AV20EX)
+ case 0x94:
+ mainmem->write_signal(FM7_MAINIO_MMR_EXTENDED, data, 0x80);
+ mainmem->write_signal(FM7_MAINMEM_REFRESH_FAST, data, 0x04);
+ mainmem->write_signal(FM7_MAINIO_WINDOW_FAST , data, 0x01);
+
+ break;
+# if defined(_FM77AV40SX) || defined(_FM77AV40EX)
+ case 0x95:
+ mainmem->write_signal(FM7_MAINIO_FASTMMR_ENABLED, data, 0x08);
+ mainmem->write_signal(FM7_MAINIO_EXTROM, data , 0x80);
+ break;
+# endif
+#endif
+#if defined(HAS_DMA)
+ case 0x98:
+ dma_addr = data & 0x1f;
+ break;
+ case 0x99:
+ dmac->write_data8(dma_addr, data);
+ //this->out_debug_log(_T("IO: Wrote DMA %02x to reg %02x\n"), data, dma_addr);
+ break;
+#endif
default:
//printf("MAIN: Write I/O Addr=%08x DATA=%02x\n", addr, data);
break;
}
+#if !defined(_FM8)
if((addr < 0x40) && (addr >= 0x38)) {
addr = (addr - 0x38) | FM7_SUBMEM_OFFSET_DPALETTE;
- display->write_data8(addr, (uint8)data);
+ display->write_data8(addr, (uint8_t)data);
return;
}// Another:
+#endif
return;
} else if(addr == FM7_MAINIO_CLOCKMODE) {
- set_clockmode((uint8)data);
+ set_clockmode((uint8_t)data);
return;
}
//if((addr >= 0x0006) && !(addr == 0x1f)) printf("MAINIO: WRITE: %08x DATA=%08x\n", addr, data);
case EVENT_UP_BREAK:
set_break_key(false);
break;
+#if !defined(_FM8)
case EVENT_TIMERIRQ_ON:
- if(!irqmask_timer) set_irq_timer(true);
+ //if(!irqmask_timer) set_irq_timer(true);
+ set_irq_timer(!irqmask_timer);
break;
+#endif
case EVENT_FD_MOTOR_ON:
set_fdc_motor(true);
event_fdc_motor = -1;
set_fdc_motor(false);
event_fdc_motor = -1;
break;
+ case EVENT_PRINTER_RESET_COMPLETED:
+ this->write_signals(&printer_reset_bus, 0x00);
+ break;
default:
break;
}
clock_fast = false;
break;
}
- this->write_signal(FM7_MAINIO_CLOCKMODE, clock_fast ? 1 : 0, 1);
- mainmem->write_signal(FM7_MAINIO_CLOCKMODE, clock_fast ? 1 : 0, 1);
+ this->write_signals(&clock_status, clock_fast ? 0xffffffff : 0);
+#if defined(_FM8)
+ // BASIC
+ if(config.boot_mode == 0) {
+ mainmem->write_signal(FM7_MAINIO_IS_BASICROM, 0xffffffff, 0xffffffff);
+ } else {
+ mainmem->write_signal(FM7_MAINIO_IS_BASICROM, 0, 0xffffffff);
+ }
+ mainmem->write_signal(FM7_MAINIO_PUSH_FD0F, (config.boot_mode == 0) ? 1 : 0, 0x01);
+ mainmem->write_signal(FM7_MAINIO_BOOTMODE, bootmode, 0xffffffff);
+#endif
}
void FM7_MAINIO::event_vline(int v, int clock)
{
}
-#define STATE_VERSION 3
+#define STATE_VERSION 7
void FM7_MAINIO::save_state(FILEIO *state_fio)
{
int ch;
int addr;
state_fio->FputUint32_BE(STATE_VERSION);
state_fio->FputInt32_BE(this_device_id);
+ this->out_debug_log(_T("Save State: MAINIO: id=%d ver=%d\n"), this_device_id, STATE_VERSION);
// Version 1
{
state_fio->FputBool(irqmask_printer);
state_fio->FputBool(irqmask_keyboard);
+ state_fio->FputBool(irqreq_syndet);
+ state_fio->FputBool(irqreq_rxrdy);
+ state_fio->FputBool(irqreq_txrdy);
+ state_fio->FputBool(irqreq_printer);
+ state_fio->FputBool(irqreq_keyboard);
// FD03
state_fio->FputUint8(irqstat_reg0);
state_fio->FputBool(stat_fdmode_2hd);
state_fio->FputBool(stat_kanjirom);
state_fio->FputBool(stat_400linecard);
+#elif defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX) || \
+ defined(_FM77AV20) || defined(_FM77AV20EX) || defined(_FM77AV20SX)
+ state_fio->FputBool(stat_kanjirom);
#endif
state_fio->FputBool(firq_break_key);
state_fio->FputBool(firq_sub_attention);
state_fio->FputBool(intmode_fdc);
// FD05
state_fio->FputBool(extdet_neg);
- //state_fio->FputBool(sub_busy);
state_fio->FputBool(sub_halt);
- //state_fio->FputBool(sub_halt_bak);
state_fio->FputBool(sub_cancel);
- //state_fio->FputBool(sub_cancel_bak);
-#if defined(WITH_Z80)
- state_fio->FputBool(z80_sel);
-#endif
// FD06, 07
state_fio->FputBool(intstat_syndet);
state_fio->FputBool(intstat_rxrdy);
// FD0B
// FD0F
-
+#if defined(_FM8)
+ state_fio->FputBool(connect_psg);
+#else
state_fio->FputBool(connect_opn);
state_fio->FputBool(connect_whg);
state_fio->FputBool(connect_thg);
state_fio->FputBool(opn_psg_77av);
-
+#endif
+#if defined(_FM8)
+ {
+ state_fio->FputUint32_BE(opn_address[0]);
+ state_fio->FputUint32_BE(opn_data[0]);
+ state_fio->FputUint32_BE(opn_stat[0]);
+ state_fio->FputUint32_BE(opn_cmdreg[0]);
+ state_fio->FputUint32_BE(opn_ch3mode[0]);
+ }
+#else
for(ch = 0; ch < 4; ch++) {
state_fio->FputUint32_BE(opn_address[ch]);
state_fio->FputUint32_BE(opn_data[ch]);
state_fio->FputUint32_BE(opn_cmdreg[ch]);
state_fio->FputUint32_BE(opn_ch3mode[ch]);
}
- state_fio->FputUint32_BE(joyport_a);
- state_fio->FputUint32_BE(joyport_b);
+#endif
state_fio->FputBool(intstat_opn);
state_fio->FputBool(intstat_mouse);
state_fio->FputUint8(irqreg_fdc);
state_fio->FputBool(fdc_motor);
state_fio->FputBool(irqstat_fdc);
-
// KANJI ROM
state_fio->FputBool(connect_kanjiroml1);
- state_fio->FputUint8(kaddress.b.l);
- state_fio->FputUint8(kaddress.b.h);
#if defined(_FM77AV_VARIANTS)
state_fio->FputBool(connect_kanjiroml2);
- state_fio->FputUint8(kaddress_l2.b.l);
- state_fio->FputUint8(kaddress_l2.b.h);
state_fio->FputBool(boot_ram);
state_fio->FputBool(hotreset);
// FD13
state_fio->FputUint8(sub_monitor_type);
- //state_fio->FputUint8(sub_monitor_bak);
#endif
// MMR
-#if defined(HAS_MMR)
- //state_fio->FputBool(mmr_enabled);
- //state_fio->FputBool(mmr_fast);
- //state_fio->FputBool(window_enabled);
- //state_fio->FputUint8(mmr_segment);
- //for(addr = 0; addr < 0x80; addr++) state_fio->FputUint8(mmr_table[addr]);
- //state_fio->FputUint32_BE(window_offset);
-#endif
}
//V2
{
}
{ // V3
state_fio->FputInt32_BE(event_fdc_motor);
- }
+#if defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX)|| \
+ defined(_FM77AV20) || defined(_FM77AV20SX) || defined(_FM77AV20EX)
+ for(ch = 0; ch < 4; ch++) state_fio->FputUint8(fdc_drive_table[ch]);
+ state_fio->FputUint8(fdc_reg_fd1e);
+#endif
+#if defined(HAS_DMA)
+ state_fio->FputBool(intstat_dma);
+ state_fio->FputUint8(dma_addr & 0x1f);
+#endif
+#if defined(_FM77AV_VARIANTS)
+ state_fio->FputUint8(reg_fd12);
+#endif
+ }
+ // FD05
+ state_fio->FputBool(req_z80run);
+ state_fio->FputBool(z80_run);
}
bool FM7_MAINIO::load_state(FILEIO *state_fio)
{
int ch;
int addr;
- bool stat = false;
- uint32 version;
+ //bool stat = false;
+ uint32_t version;
version = state_fio->FgetUint32_BE();
if(this_device_id != state_fio->FgetInt32_BE()) return false;
+ this->out_debug_log(_T("Load State: MAINIO: id=%d ver=%d\n"), this_device_id, version);
if(version >= 1) {
for(addr = 0; addr < 0x100; addr++) io_w_latch[addr] = state_fio->FgetUint8();
irqmask_printer = state_fio->FgetBool();
irqmask_keyboard = state_fio->FgetBool();
+ irqreq_syndet = state_fio->FgetBool();
+ irqreq_rxrdy = state_fio->FgetBool();
+ irqreq_txrdy = state_fio->FgetBool();
+ irqreq_printer = state_fio->FgetBool();
+ irqreq_keyboard = state_fio->FgetBool();
// FD03
irqstat_reg0 = state_fio->FgetUint8();
stat_fdmode_2hd = state_fio->FgetBool();
stat_kanjirom = state_fio->FgetBool();
stat_400linecard = state_fio->FgetBool();
+#elif defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX) || \
+ defined(_FM77AV20) || defined(_FM77AV20EX) || defined(_FM77AV20SX)
+ stat_kanjirom = state_fio->FgetBool();
#endif
firq_break_key = state_fio->FgetBool();
firq_sub_attention = state_fio->FgetBool();
intmode_fdc = state_fio->FgetBool();
// FD05
extdet_neg = state_fio->FgetBool();
- //sub_busy = state_fio->FgetBool();
sub_halt = state_fio->FgetBool();
- //sub_halt_bak = state_fio->FgetBool();
sub_cancel = state_fio->FgetBool();
- //sub_cancel_bak = state_fio->FgetBool();
-#if defined(WITH_Z80)
- z80_sel = state_fio->FgetBool();
-#endif
// FD06, 07
intstat_syndet = state_fio->FgetBool();
intstat_rxrdy = state_fio->FgetBool();
// FD0B
// FD0F
+#if defined(_FM8)
+ connect_psg = state_fio->FgetBool();
+#else
connect_opn = state_fio->FgetBool();
connect_whg = state_fio->FgetBool();
connect_thg = state_fio->FgetBool();
opn_psg_77av = state_fio->FgetBool();
-
+#endif
+#if defined(_FM8)
+ {
+ opn_address[0] = state_fio->FgetUint32_BE();
+ opn_data[0] = state_fio->FgetUint32_BE();
+ opn_stat[0] = state_fio->FgetUint32_BE();
+ opn_cmdreg[0] = state_fio->FgetUint32_BE();
+ opn_ch3mode[0] = state_fio->FgetUint32_BE();
+ }
+#else
for(ch = 0; ch < 4; ch++) {
opn_address[ch] = state_fio->FgetUint32_BE();
opn_data[ch] = state_fio->FgetUint32_BE();
opn_cmdreg[ch] = state_fio->FgetUint32_BE();
opn_ch3mode[ch] = state_fio->FgetUint32_BE();
}
- joyport_a = state_fio->FgetUint32_BE();
- joyport_b = state_fio->FgetUint32_BE();
-
+#endif
intstat_opn = state_fio->FgetBool();
intstat_mouse = state_fio->FgetBool();
mouse_enable = state_fio->FgetBool();
// KANJI ROM
connect_kanjiroml1 = state_fio->FgetBool();
- kaddress.d = 0;
- kaddress.b.l = state_fio->FgetUint8();
- kaddress.b.h = state_fio->FgetUint8();
#if defined(_FM77AV_VARIANTS)
connect_kanjiroml2 = state_fio->FgetBool();
- kaddress_l2.d = 0;
- kaddress_l2.b.l = state_fio->FgetUint8();
- kaddress_l2.b.h = state_fio->FgetUint8();
-
boot_ram = state_fio->FgetBool();
hotreset = state_fio->FgetBool();
// FD13
sub_monitor_type = state_fio->FgetUint8();
- //sub_monitor_bak = state_fio->FgetUint8();
#endif
- // MMR
-#if defined(HAS_MMR)
- //mmr_enabled = state_fio->FgetBool();
- //mmr_fast = state_fio->FgetBool();
- //window_enabled = state_fio->FgetBool();
- //mmr_segment = state_fio->FgetUint8();
- //for(addr = 0; addr < 0x80; addr++) mmr_table[addr] = state_fio->FgetUint8();
- //window_offset = state_fio->FgetUint32_BE();
-#endif
}
if(version >= 2) {
event_beep = state_fio->FgetInt32_BE();
// V2
if(version >= 3) { // V3
event_fdc_motor = state_fio->FgetInt32_BE();
- }
+#if defined(_FM77AV40) || defined(_FM77AV40EX) || defined(_FM77AV40SX)|| \
+ defined(_FM77AV20) || defined(_FM77AV20SX) || defined(_FM77AV20EX)
+ for(ch = 0; ch < 4; ch++) fdc_drive_table[ch] = state_fio->FgetUint8();
+ fdc_reg_fd1e = state_fio->FgetUint8();
+#endif
+#if defined(HAS_DMA)
+ intstat_dma = state_fio->FgetBool();
+ dma_addr = (uint32_t)(state_fio->FgetUint8() & 0x1f);
+#endif
+#if defined(_FM77AV_VARIANTS)
+ reg_fd12 = state_fio->FgetUint8();
+#endif
+ }
+ // FD05
+ req_z80run = state_fio->FgetBool();
+ z80_run = state_fio->FgetBool();
+
+ if(version != STATE_VERSION) return false;
return true;
}
OSDN Git Service
