# -*-makefile-*-
-# $PostgreSQL: pgsql/src/Makefile.global.in,v 1.225 2006/07/24 16:32:44 petere Exp $
+# src/Makefile.global.in
#------------------------------------------------------------------------------
# All PostgreSQL makefiles include this file and use the variables it sets,
#
# Meta configuration
-.PHONY: all install install-strip installdirs uninstall clean distclean maintainer-clean distprep check installcheck maintainer-check
-.SILENT: installdirs
+standard_targets = all install installdirs uninstall distprep clean distclean maintainer-clean coverage check installcheck maintainer-check
+# these targets should recurse even into subdirectories not being built:
+standard_always_targets = distprep clean distclean maintainer-clean
+
+.PHONY: $(standard_targets) install-strip html man installcheck-parallel
# make `all' the default target
all:
# PostgreSQL version number
VERSION = @PACKAGE_VERSION@
+MAJORVERSION = @PG_MAJORVERSION@
# Support for VPATH builds
vpath_build = @vpath_build@
VPATH = $(srcdir)
endif
+vpathsearch = `for f in $(addsuffix /$(1),$(subst :, ,. $(VPATH))); do test -r $$f && echo $$f && break; done`
+
# Saved arguments from configure
configure_args = @configure_args@
ifndef PGXS
-# Note that prefix and exec_prefix aren't defined in a PGXS build;
+# Note that prefix, exec_prefix, and datarootdir aren't defined in a PGXS build;
# makefiles may only use the derived variables such as bindir.
prefix := @prefix@
exec_prefix := @exec_prefix@
+datarootdir := @datarootdir@
bindir := @bindir@
mandir := @mandir@
docdir := @docdir@
-# docdir can be an empty string to signify --without-docdir
-ifneq (,$(docdir))
ifeq "$(findstring pgsql, $(docdir))" ""
ifeq "$(findstring postgres, $(docdir))" ""
override docdir := $(docdir)/postgresql
endif
endif
-endif
+
+htmldir := @htmldir@
localedir := @localedir@
else # PGXS case
+# Extension makefiles should set PG_CONFIG, but older ones might not
+ifndef PG_CONFIG
PG_CONFIG = pg_config
+endif
bindir := $(shell $(PG_CONFIG) --bindir)
datadir := $(shell $(PG_CONFIG) --sharedir)
includedir_internal = $(pkgincludedir)/internal
pgxsdir = $(pkglibdir)/pgxs
-sqlmansect_dummy = l
-
##########################################################################
#
with_python = @with_python@
with_tcl = @with_tcl@
with_openssl = @with_openssl@
+with_ossp_uuid = @with_ossp_uuid@
+with_selinux = @with_selinux@
+with_libxml = @with_libxml@
+with_libxslt = @with_libxslt@
+with_system_tzdata = @with_system_tzdata@
with_zlib = @with_zlib@
enable_shared = @enable_shared@
enable_rpath = @enable_rpath@
enable_nls = @enable_nls@
enable_debug = @enable_debug@
enable_dtrace = @enable_dtrace@
+enable_coverage = @enable_coverage@
enable_thread_safety = @enable_thread_safety@
python_includespec = @python_includespec@
python_libspec = @python_libspec@
python_additional_libs = @python_additional_libs@
python_configdir = @python_configdir@
+python_majorversion = @python_majorversion@
python_version = @python_version@
krb_srvtab = @krb_srvtab@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
-have_docbook = @have_docbook@
-DOCBOOKSTYLE = @DOCBOOKSTYLE@
-COLLATEINDEX = @COLLATEINDEX@
-
##########################################################################
#
CC = @CC@
GCC = @GCC@
+SUN_STUDIO_CC = @SUN_STUDIO_CC@
CFLAGS = @CFLAGS@
# Kind-of compilers
-YACC = @YACC@
-YFLAGS = @YFLAGS@
+BISON = @BISON@
+BISONFLAGS = @BISONFLAGS@ $(YFLAGS)
FLEX = @FLEX@
FLEXFLAGS = @FLEXFLAGS@ $(LFLAGS)
DTRACE = @DTRACE@
DTRACEFLAGS = @DTRACEFLAGS@
+ZIC = @ZIC@
# Linking
+AR = @AR@
+DLLTOOL = @DLLTOOL@
+DLLWRAP = @DLLWRAP@
LIBS = @LIBS@
+LDAP_LIBS_FE = @LDAP_LIBS_FE@
+LDAP_LIBS_BE = @LDAP_LIBS_BE@
+OSSP_UUID_LIBS = @OSSP_UUID_LIBS@
LD = @LD@
with_gnu_ld = @with_gnu_ld@
ld_R_works = @ld_R_works@
-LDFLAGS = @LDFLAGS@
-LDFLAGS_SL = @LDFLAGS_SL@
+
+# We want -L for libpgport.a to be first in LDFLAGS. We also need LDFLAGS
+# to be a "recursively expanded" variable, else adjustments to rpathdir
+# don't work right. So we must NOT do LDFLAGS := something, meaning this has
+# to be done first and elsewhere we must only do LDFLAGS += something.
+ifdef PGXS
+ LDFLAGS = -L$(libdir)
+else
+ LDFLAGS = -L$(top_builddir)/src/port
+endif
+LDFLAGS += @LDFLAGS@
+
+LDFLAGS_EX = @LDFLAGS_EX@
+# LDFLAGS_SL might have already been assigned by calling makefile
+LDFLAGS_SL += @LDFLAGS_SL@
LDREL = -r
LDOUT = -o
RANLIB = @RANLIB@
+WINDRES = @WINDRES@
X = @EXEEXT@
-# Perl
+# Perl
-# quoted for pathname with spaces
-PERL = "@PERL@"
+ifneq (@PERL@,)
+ # quoted to protect pathname with spaces
+ PERL = '@PERL@'
+else
+ PERL = $(missing) perl
+endif
perl_archlibexp = @perl_archlibexp@
perl_privlibexp = @perl_privlibexp@
perl_useshrplib = @perl_useshrplib@
GZIP = gzip
BZIP2 = bzip2
-PL_TESTDB = pl_regression
-CONTRIB_TESTDB = contrib_regression
-
# Installation.
INSTALL = $(SHELL) $(top_srcdir)/config/install-sh -c
# Override in Makefile.port if necessary
INSTALL_SHLIB_OPTS = -m 755
-mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
+MKDIR_P = @MKDIR_P@
+
missing = $(SHELL) $(top_srcdir)/config/missing
STRIP = @STRIP@
# Documentation
-JADE = @JADE@
-NSGMLS = @NSGMLS@
-SGMLSPL = @SGMLSPL@
+have_docbook = @have_docbook@
+COLLATEINDEX = @COLLATEINDEX@
+DOCBOOKSTYLE = @DOCBOOKSTYLE@
+JADE = @JADE@
+NSGMLS = @NSGMLS@
+OSX = @OSX@
+XSLTPROC = @XSLTPROC@
+
+# Code coverage
+
+GCOV = @GCOV@
+LCOV = @LCOV@
+GENHTML = @GENHTML@
+
+ifeq ($(enable_coverage),yes)
+# ccache loses .gcno files
+export CCACHE_DISABLE = 1
+endif
# Feature settings
# Name of the "template"
PORTNAME= @PORTNAME@
+build_os = @build_os@
+
host_tuple = @host@
host_os = @host_os@
host_cpu = @host_cpu@
# systems now. May be applicable to other systems to?
ELF_SYSTEM= @ELF_SYS@
+# Backend stack size limit has to be hard-wired on Windows (it's in bytes)
+WIN32_STACK_RLIMIT=4194304
+
+# Set if we have a working win32 crashdump header
+have_win32_dbghelp = @have_win32_dbghelp@
+
# Pull in platform-specific magic
include $(top_builddir)/src/Makefile.port
libpq_builddir = $(top_builddir)/src/interfaces/libpq
endif
-# This is for use for libraries linking to libpq. Because libpqport
-# isn't created with the same link flags as libpq, it can't be used.
+# This macro is for use by libraries linking to libpq. (Because libpgport
+# isn't created with the same link flags as libpq, it can't be used.)
libpq = -L$(libpq_builddir) -lpq
-
-# If doing static linking, shared library dependency can't be
-# used so we specify pthread libs for every usage of libpq
+
+# If doing static linking, shared library dependency info isn't available,
+# so add in the libraries that libpq depends on.
ifeq ($(enable_shared), no)
-libpq += $(PTHREAD_LIBS)
-else
-# AIX libraries do not remember their required libs so we have to force
-# thread dependent libraires in the link
-ifeq ($(PORTNAME), aix)
-libpq += $(PTHREAD_LIBS)
-endif
+libpq += $(filter -lintl -lssl -lcrypto -lkrb5 -lcrypt, $(LIBS)) \
+ $(LDAP_LIBS_FE) $(PTHREAD_LIBS)
endif
-# Force clients to pull symbols from the non-shared library libpgport
-# rather than pulling some libpgport symbols from libpq just because
-# libpq uses those functions too. This makes applications less
+# This macro is for use by client executables (not libraries) that use libpq.
+# We force clients to pull symbols from the non-shared library libpgport
+# rather than pulling some libpgport symbols from libpq just because
+# libpq uses those functions too. This makes applications less
# dependent on changes in libpq's usage of pgport. To do this we link to
# pgport before libpq. This does cause duplicate -lpgport's to appear
# on client link lines.
##########################################################################
#
+# Testing support
+
+PL_TESTDB = pl_regression
+CONTRIB_TESTDB = contrib_regression
+
+ifdef NO_LOCALE
+NOLOCALE += --no-locale
+endif
+
+pg_regress_locale_flags = $(if $(ENCODING),--encoding=$(ENCODING)) $(NOLOCALE)
+
+pg_regress_check = $(top_builddir)/src/test/regress/pg_regress --inputdir=$(srcdir) --temp-install=./tmp_check --top-builddir=$(top_builddir) $(pg_regress_locale_flags)
+pg_regress_installcheck = $(top_builddir)/src/test/regress/pg_regress --inputdir=$(srcdir) --psqldir='$(PSQLDIR)' $(pg_regress_locale_flags)
+
+pg_regress_clean_files = results/ regression.diffs regression.out tmp_check/ log/
+
+
+##########################################################################
+#
# Customization
#
# This includes your local customizations if Makefile.custom exists
##########################################################################
#
# substitute implementations of C library routines (see src/port/)
+# note we already included -L.../src/port in LDFLAGS above
-LIBOBJS = @LIBOBJS@ copydir.o dirmod.o exec.o noblock.o path.o pipe.o pgsleep.o pgstrcasecmp.o sprompt.o thread.o
+LIBOBJS = @LIBOBJS@
LIBS := -lpgport $(LIBS)
-# add location of libpgport.a to LDFLAGS
-ifdef PGXS
-override LDFLAGS := -L$(libdir) $(LDFLAGS)
-else
-override LDFLAGS := -L$(top_builddir)/src/port $(LDFLAGS)
-endif
# to make ws2_32.lib the last library, and always link with shfolder,
# so SHGetFolderName isn't picked up from shell32.dll
#
# Global targets and rules
+%.i: %.c
+ $(CPP) $(CPPFLAGS) -o $@ $<
+
%.gz: %
- $(GZIP) -f --best $<
+ $(GZIP) --best -c $< >$@
%.bz2: %
- $(BZIP2) -f $<
-
-ifeq ($(PORTNAME),win32)
-# Build rules to add versioninfo resources to win32 binaries
-WIN32RES += win32ver.o
-ifeq ($(PGFILESHLIB),1)
-PGFTYPE=VFT_DLL
-else
-PGFTYPE=VFT_APP
-endif
-ifneq (,$(PGAPPICON))
-PGICOSTR=$(subst /,\/,IDI_ICON ICON \"$(top_builddir)/src/port/$(PGAPPICON).ico\")
-endif
-win32ver.rc: $(top_builddir)/src/port/win32ver.rc
- sed -e 's;FILEDESC;$(PGFILEDESC);' -e 's;VFT_APP;$(PGFTYPE);' -e 's;_ICO_;$(PGICOSTR);' -e 's;\(VERSION.*\),0 *$$;\1,'`date '+%y%j' | sed 's/^0*//'`';' $(top_builddir)/src/port/win32ver.rc > win32ver.rc
-win32ver.o: $(top_builddir)/src/port/win32ver.rc
- sed -e 's;FILEDESC;$(PGFILEDESC);' -e 's;VFT_APP;$(PGFTYPE);' -e 's;_ICO_;$(PGICOSTR);' -e 's;\(VERSION.*\),0 *$$;\1,'`date '+%y%j' | sed 's/^0*//'`';' $(top_builddir)/src/port/win32ver.rc > win32ver.rc
- windres -i win32ver.rc -o win32ver.o --include-dir=$(top_builddir)/src/include
- rm -f win32ver.rc
-endif
+ $(BZIP2) -c $< >$@
ifndef PGXS
$(top_builddir)/src/include/stamp-h: $(top_srcdir)/src/include/pg_config.h.in $(top_builddir)/config.status
cd $(top_builddir) && ./config.status src/include/pg_config.h
+# Also remake ecpg_config.h from ecpg_config.h.in if the latter changed, same
+# logic as above.
+$(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h: $(top_builddir)/src/interfaces/ecpg/include/stamp-h
+
+ $(top_builddir)/src/interfaces/ecpg/include/stamp-h: $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h.in $(top_builddir)/config.status
+ cd $(top_builddir) && ./config.status src/interfaces/ecpg/include/ecpg_config.h
+
# When configure changes, rerun configure with the same options as
# last time. To change configure, you need to run autoconf manually.
$(top_builddir)/config.status: $(top_srcdir)/configure
##########################################################################
#
+# Recursive make support
+# ----------------------
+# Instead of recursing through subdirectories with a for loop or
+# repeated $(MAKE) -C whatever calls, this is a little smarter: it
+# allows parallel make across directories and lets make -k and -q work
+# correctly.
+
+# We need the $(eval) function and order-only prerequisites, which are
+# available in GNU make 3.80. That also happens to be the version
+# where the .VARIABLES variable was introduced, so this is a simple check.
+ifndef .VARIABLES
+$(error GNU make 3.80 or newer is required. You are using version $(MAKE_VERSION))
+endif
+
+# This function is only for internal use below. It should be called
+# using $(eval). It will set up a target so that it recurses into
+# a given subdirectory. Note that to avoid a nasty bug in make 3.80,
+# this function has to avoid using any complicated constructs (like
+# multiple targets on a line) and also not contain any lines that expand
+# to more than about 200 bytes. This is why we make it apply to just one
+# subdirectory at a time, rather than to a list of subdirectories.
+# $1: target name, e.g., all
+# $2: subdir name
+# $3: target to run in subdir, usually same as $1
+define _create_recursive_target
+.PHONY: $(1)-$(2)-recurse
+$(1): $(1)-$(2)-recurse
+$(1)-$(2)-recurse:
+ $$(MAKE) -C $(2) $(3)
+endef
+# Note that the use of $$ on the last line above is important; we want
+# $(MAKE) to be evaluated when the rule is run, not when the $(eval) is run
+# to create the rule. This is necessary to get make -q working.
+
+# Call this function in a makefile that needs to recurse into subdirectories.
+# In the normal case all arguments can be defaulted.
+# $1: targets to make recursive (defaults to list of standard targets)
+# $2: list of subdirs (defaults to SUBDIRS variable)
+# $3: target to run in subdir (defaults to current element of $1)
+recurse = $(foreach target,$(if $1,$1,$(standard_targets)),$(foreach subdir,$(if $2,$2,$(SUBDIRS)),$(eval $(call _create_recursive_target,$(target),$(subdir),$(if $3,$3,$(target))))))
+
+# If a makefile's list of SUBDIRS varies depending on configuration, then
+# any subdirectories excluded from SUBDIRS should instead be added to
+# ALWAYS_SUBDIRS, and then it must call recurse_always as well as recurse.
+# This ensures that distprep, distclean, etc will apply to all subdirectories.
+# In the normal case all arguments will be defaulted.
+# $1: targets to make recursive (defaults to standard_always_targets)
+# $2: list of subdirs (defaults to ALWAYS_SUBDIRS variable)
+# $3: target to run in subdir (defaults to current element of $1)
+recurse_always = $(foreach target,$(if $1,$1,$(standard_always_targets)),$(foreach subdir,$(if $2,$2,$(ALWAYS_SUBDIRS)),$(eval $(call _create_recursive_target,$(target),$(subdir),$(if $3,$3,$(target))))))
+
+
+##########################################################################
+#
# Automatic dependency generation
# -------------------------------
# When we configure with --enable-depend then we override the default
clean-deps:
@rm -rf $(DEPDIR)
+# When in automatic dependency mode, never delete any intermediate
+# files automatically. Otherwise, the following could happen: When
+# starting from a clean source tree, the first build would delete the
+# intermediate file, but also create the dependency file, which
+# mentions the intermediate file, thus making it non-intermediate.
+# The second build will then need to rebuild the now non-intermediate
+# missing file. So the second build will do work even though nothing
+# had changed. One place where this happens is the .c -> .o -> .so
+# chain for some contrib modules.
+.SECONDARY:
+
endif # autodepend
endif # nls.mk
endif # enable_nls
+
+
+##########################################################################
+#
+# Coverage
+
+# Explanation of involved files:
+# foo.c source file
+# foo.o object file
+# foo.gcno gcov graph (a.k.a. "notes") file, created at compile time
+# (by gcc -ftest-coverage)
+# foo.gcda gcov data file, created when the program is run (for
+# programs compiled with gcc -fprofile-arcs)
+# foo.c.gcov gcov output file with coverage information, created by
+# gcov from foo.gcda (by "make coverage")
+# foo.c.gcov.out stdout captured when foo.c.gcov is created, mildly
+# interesting
+# lcov.info lcov tracefile, built from gcda files in one directory,
+# later collected by "make coverage-html"
+
+ifeq ($(enable_coverage), yes)
+
+# There is a strange interaction between lcov and existing .gcov
+# output files. Hence the rm command and the ordering dependency.
+
+gcda_files := $(wildcard *.gcda)
+
+lcov.info: $(gcda_files)
+ rm -f *.gcov
+ $(if $^,$(LCOV) -d . -c -o $@ $(LCOVFLAGS))
+
+%.c.gcov: %.gcda | lcov.info
+ $(GCOV) -b -f -p -o . $(GCOVFLAGS) $*.c >$*.c.gcov.out
+
+coverage: $(gcda_files:.gcda=.c.gcov) lcov.info
+
+.PHONY: coverage-html
+coverage-html: coverage
+ rm -rf coverage
+ mkdir coverage
+ $(GENHTML) --show-details --legend --output-directory=coverage --title=PostgreSQL --num-spaces=4 --prefix=$(abs_top_srcdir) `find . -name lcov.info -print`
+
+
+# hook for clean-up
+clean distclean maintainer-clean: clean-coverage
+
+.PHONY: clean-coverage
+clean-coverage:
+ rm -rf coverage
+ rm -f *.gcda *.gcno lcov.info *.gcov *.gcov.out
+
+
+# User-callable target to reset counts between test runs
+coverage-clean:
+ rm -f `find . -name '*.gcda' -print`
+
+endif # enable_coverage