#
# Makefile for src/interfaces/libpq library
#
-# Copyright (c) 1994, Regents of the University of California
+# Portions Copyright (c) 1996-2008, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
#
-# $Header: /cvsroot/pgsql/src/interfaces/libpq/Makefile,v 1.89 2003/08/08 03:22:24 momjian Exp $
+# $PostgreSQL: pgsql/src/interfaces/libpq/Makefile,v 1.171 2008/12/07 08:36:22 petere Exp $
#
#-------------------------------------------------------------------------
# shared library parameters
NAME= pq
-SO_MAJOR_VERSION= 3
-SO_MINOR_VERSION= 1
+SO_MAJOR_VERSION= 5
+SO_MINOR_VERSION= 2
-override CPPFLAGS := -I$(srcdir) $(CPPFLAGS) $(THREAD_CFLAGS) -DFRONTEND -DSYSCONFDIR='"$(sysconfdir)"'
+override CPPFLAGS := -DFRONTEND -DUNSAFE_STAT_OK -I$(srcdir) $(CPPFLAGS) -I$(top_builddir)/src/port
+ifneq ($(PORTNAME), win32)
+override CFLAGS += $(PTHREAD_CFLAGS)
+endif
-OBJS= fe-auth.o fe-connect.o fe-exec.o fe-misc.o fe-print.o fe-lobj.o \
- fe-protocol2.o fe-protocol3.o pqexpbuffer.o pqsignal.o fe-secure.o \
- dllist.o md5.o ip.o wchar.o encnames.o \
- $(filter crypt.o getaddrinfo.o inet_aton.o snprintf.o strerror.o path.o thread.o, $(LIBOBJS))
+# Need to recompile any libpgport object files because we need these
+# object files to use the same compile flags as libpq. If we used
+# the object files from libpgport, this would not be true on all
+# platforms.
+LIBS := $(LIBS:-lpgport=)
+
+OBJS= fe-auth.o fe-connect.o fe-exec.o fe-misc.o fe-print.o fe-lobj.o \
+ fe-protocol2.o fe-protocol3.o pqexpbuffer.o pqsignal.o fe-secure.o \
+ libpq-events.o \
+ md5.o ip.o wchar.o encnames.o noblock.o pgstrcasecmp.o thread.o \
+ $(filter crypt.o getaddrinfo.o inet_aton.o open.o snprintf.o strerror.o strlcpy.o win32error.o, $(LIBOBJS))
+
+ifeq ($(PORTNAME), cygwin)
+override shlib = cyg$(NAME)$(DLSUFFIX)
+endif
+
+ifeq ($(PORTNAME), win32)
+OBJS += win32.o pgsleep.o libpqrc.o
+
+libpqrc.o: libpq.rc
+ $(WINDRES) -i $< -o $@
+
+ifeq ($(enable_thread_safety), yes)
+OBJS += pthread-win32.o
+endif
+endif
# Add libraries that libpq depends (or might depend) on into the
# shared library link. (The order in which you list them here doesn't
# matter.)
-SHLIB_LINK += $(filter -lcrypt -ldes -lkrb -lcom_err -lcrypto -lk5crypto -lkrb5 -lssl -lsocket -lnsl -lresolv -lintl, $(LIBS)) $(THREAD_LIBS)
+ifneq ($(PORTNAME), win32)
+SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi_krb5 -lgss -lgssapi -lssl -lsocket -lnsl -lresolv -lintl, $(LIBS)) $(LDAP_LIBS_FE) $(PTHREAD_LIBS)
+else
+SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi32 -lssl -lsocket -lnsl -lresolv -lintl $(PTHREAD_LIBS), $(LIBS)) $(LDAP_LIBS_FE)
+endif
+ifeq ($(PORTNAME), win32)
+SHLIB_LINK += -lshfolder -lwsock32 -lws2_32 -lsecur32 $(filter -leay32 -lssleay32 -lcomerr32 -lkrb5_32, $(LIBS))
+endif
+SHLIB_EXPORTS = exports.txt
all: all-lib
# For port modules, this only happens if configure decides the module
# is needed (see filter hack in OBJS, above).
-crypt.c getaddrinfo.c inet_aton.c snprintf.c strerror.c path.c thread.c: % : $(top_srcdir)/src/port/%
+crypt.c getaddrinfo.c inet_aton.c noblock.c open.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c thread.c win32error.c pgsleep.c: % : $(top_srcdir)/src/port/%
rm -f $@ && $(LN_S) $< .
md5.c ip.c: % : $(backend_src)/libpq/%
rm -f $@ && $(LN_S) $< .
-dllist.c: $(backend_src)/lib/dllist.c
- rm -f $@ && $(LN_S) $< .
-
encnames.c wchar.c : % : $(backend_src)/utils/mb/%
rm -f $@ && $(LN_S) $< .
+distprep: $(srcdir)/libpq-dist.rc
+
+libpq.rc $(srcdir)/libpq-dist.rc: libpq.rc.in
+ sed -e 's/\(VERSION.*\),0 *$$/\1,'`date '+%y%j' | sed 's/^0*//'`'/' $< >$@
+
+# Depend on Makefile.global to force rebuild on re-run of configure.
+# (But libpq-dist.rc is shipped in the distribution for shell-less
+# installations and is only updated by distprep.)
+libpq.rc: $(top_builddir)/src/Makefile.global
+
+fe-connect.o: fe-connect.c $(top_builddir)/src/port/pg_config_paths.h
+
+$(top_builddir)/src/port/pg_config_paths.h:
+ $(MAKE) -C $(top_builddir)/src/port pg_config_paths.h
+
install: all installdirs install-lib
- $(INSTALL_DATA) $(srcdir)/libpq-fe.h $(DESTDIR)$(includedir)
- $(INSTALL_DATA) $(srcdir)/libpq-int.h $(DESTDIR)$(includedir_internal)
- $(INSTALL_DATA) $(srcdir)/pqexpbuffer.h $(DESTDIR)$(includedir_internal)
- $(INSTALL_DATA) $(srcdir)/pg_service.conf.sample $(DESTDIR)$(datadir)/pg_service.conf.sample
+ $(INSTALL_DATA) $(srcdir)/libpq-fe.h '$(DESTDIR)$(includedir)'
+ $(INSTALL_DATA) $(srcdir)/libpq-events.h '$(DESTDIR)$(includedir)'
+ $(INSTALL_DATA) $(srcdir)/libpq-int.h '$(DESTDIR)$(includedir_internal)'
+ $(INSTALL_DATA) $(srcdir)/pqexpbuffer.h '$(DESTDIR)$(includedir_internal)'
+ $(INSTALL_DATA) $(srcdir)/pg_service.conf.sample '$(DESTDIR)$(datadir)/pg_service.conf.sample'
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir) $(DESTDIR)$(includedir_internal)
+installdirs: installdirs-lib
+ $(mkinstalldirs) '$(DESTDIR)$(includedir)' '$(DESTDIR)$(includedir_internal)'
uninstall: uninstall-lib
- rm -f $(DESTDIR)$(includedir)/libpq-fe.h $(DESTDIR)$(includedir_internal)/libpq-int.h $(includedir_internal)/pqexpbuffer.h
-
-clean distclean maintainer-clean: clean-lib
- rm -f $(OBJS) crypt.c getaddrinfo.c inet_aton.c snprintf.c strerror.c path.c thread.c dllist.c md5.c ip.c encnames.c wchar.c
+ rm -f '$(DESTDIR)$(includedir)/libpq-fe.h'
+ rm -f '$(DESTDIR)$(includedir)/libpq-events.h'
+ rm -f '$(DESTDIR)$(includedir_internal)/libpq-int.h'
+ rm -f '$(DESTDIR)$(includedir_internal)/pqexpbuffer.h'
+ rm -f '$(DESTDIR)$(datadir)/pg_service.conf.sample'
+
+clean distclean: clean-lib
+ rm -f $(OBJS) pg_config_paths.h crypt.c getaddrinfo.c inet_aton.c noblock.c open.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c thread.c md5.c ip.c encnames.c wchar.c win32error.c pgsleep.c pthread.h libpq.rc
+# Might be left over from a Win32 client-only build
+ rm -f pg_config_paths.h
+
+maintainer-clean: distclean maintainer-clean-lib
+ rm -f $(srcdir)/libpq-dist.rc
OSDN Git Service
