#
# Makefile for src/interfaces/libpq library
#
-# Portions Copyright (c) 1996-2006, PostgreSQL Global Development Group
+# Portions Copyright (c) 1996-2008, PostgreSQL Global Development Group
# Portions Copyright (c) 1994, Regents of the University of California
#
-# $PostgreSQL: pgsql/src/interfaces/libpq/Makefile,v 1.143 2006/04/11 20:26:40 neilc Exp $
+# $PostgreSQL: pgsql/src/interfaces/libpq/Makefile,v 1.171 2008/12/07 08:36:22 petere Exp $
#
#-------------------------------------------------------------------------
# shared library parameters
NAME= pq
-SO_MAJOR_VERSION= 4
+SO_MAJOR_VERSION= 5
SO_MINOR_VERSION= 2
-DLTYPE= library
-override CPPFLAGS := -DFRONTEND -I$(srcdir) $(CPPFLAGS) -I$(top_builddir)/src/port
+override CPPFLAGS := -DFRONTEND -DUNSAFE_STAT_OK -I$(srcdir) $(CPPFLAGS) -I$(top_builddir)/src/port
ifneq ($(PORTNAME), win32)
override CFLAGS += $(PTHREAD_CFLAGS)
endif
# object files to use the same compile flags as libpq. If we used
# the object files from libpgport, this would not be true on all
# platforms.
-LIBS := $(patsubst -lpgport,, $(LIBS))
+LIBS := $(LIBS:-lpgport=)
OBJS= fe-auth.o fe-connect.o fe-exec.o fe-misc.o fe-print.o fe-lobj.o \
fe-protocol2.o fe-protocol3.o pqexpbuffer.o pqsignal.o fe-secure.o \
+ libpq-events.o \
md5.o ip.o wchar.o encnames.o noblock.o pgstrcasecmp.o thread.o \
- $(filter crypt.o getaddrinfo.o inet_aton.o open.o snprintf.o strerror.o, $(LIBOBJS))
+ $(filter crypt.o getaddrinfo.o inet_aton.o open.o snprintf.o strerror.o strlcpy.o win32error.o, $(LIBOBJS))
ifeq ($(PORTNAME), cygwin)
override shlib = cyg$(NAME)$(DLSUFFIX)
endif
ifeq ($(PORTNAME), win32)
-OBJS += win32.o libpqrc.o
-DLL_DEFFILE=libpqdll.def
+OBJS += win32.o pgsleep.o libpqrc.o
libpqrc.o: libpq.rc
- windres -i libpq.rc -o libpqrc.o
+ $(WINDRES) -i $< -o $@
ifeq ($(enable_thread_safety), yes)
OBJS += pthread-win32.o
# shared library link. (The order in which you list them here doesn't
# matter.)
ifneq ($(PORTNAME), win32)
-SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lssl -lsocket -lnsl -lresolv -lintl, $(LIBS)) $(PTHREAD_LIBS)
+SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi_krb5 -lgss -lgssapi -lssl -lsocket -lnsl -lresolv -lintl, $(LIBS)) $(LDAP_LIBS_FE) $(PTHREAD_LIBS)
else
-SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lssl -lsocket -lnsl -lresolv -lintl $(PTHREAD_LIBS), $(LIBS))
+SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi32 -lssl -lsocket -lnsl -lresolv -lintl $(PTHREAD_LIBS), $(LIBS)) $(LDAP_LIBS_FE)
endif
ifeq ($(PORTNAME), win32)
-SHLIB_LINK += -lshfolder -lwsock32 -lws2_32 $(filter -leay32 -lssleay32 -lcomerr32 -lkrb5_32, $(LIBS))
+SHLIB_LINK += -lshfolder -lwsock32 -lws2_32 -lsecur32 $(filter -leay32 -lssleay32 -lcomerr32 -lkrb5_32, $(LIBS))
endif
+SHLIB_EXPORTS = exports.txt
-all: def-files $(srcdir)/libpq.rc all-lib
+all: all-lib
# Shared library stuff
include $(top_srcdir)/src/Makefile.shlib
# For port modules, this only happens if configure decides the module
# is needed (see filter hack in OBJS, above).
-crypt.c getaddrinfo.c inet_aton.c noblock.c pgstrcasecmp.c snprintf.c strerror.c open.c thread.c: % : $(top_srcdir)/src/port/%
+crypt.c getaddrinfo.c inet_aton.c noblock.c open.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c thread.c win32error.c pgsleep.c: % : $(top_srcdir)/src/port/%
rm -f $@ && $(LN_S) $< .
md5.c ip.c: % : $(backend_src)/libpq/%
rm -f $@ && $(LN_S) $< .
-# We need several not-quite-identical variants of .DEF files to build libpq
-# DLLs for Windows. These are made from the single source file exports.txt.
-# Since we can't assume that Windows boxes will have sed, the .DEF files are
-# always built and included in distribution tarballs.
+distprep: $(srcdir)/libpq-dist.rc
-distprep: def-files $(srcdir)/libpq.rc
+libpq.rc $(srcdir)/libpq-dist.rc: libpq.rc.in
+ sed -e 's/\(VERSION.*\),0 *$$/\1,'`date '+%y%j' | sed 's/^0*//'`'/' $< >$@
-.PHONY: def-files
-
-def-files: $(srcdir)/libpqdll.def $(srcdir)/libpqddll.def $(srcdir)/blibpqdll.def
-
-$(srcdir)/libpqdll.def: exports.txt
- echo '; DEF file for MS VC++' > $@
- echo 'LIBRARY LIBPQ' >> $@
- echo 'DESCRIPTION "PostgreSQL Client Library"' >> $@
- echo 'EXPORTS' >> $@
- sed -e '/^#/d' -e 's/^\(.* \)\([0-9][0-9]*\)/ \1@ \2/' < $< >> $@
-
-$(srcdir)/libpqddll.def: exports.txt
- echo '; DEF file for MS VC++' > $@
- echo 'LIBRARY LIBPQD' >> $@
- echo 'DESCRIPTION "PostgreSQL Client Library"' >> $@
- echo 'EXPORTS' >> $@
- sed -e '/^#/d' -e 's/^\(.* \)\([0-9][0-9]*\)/ \1@ \2/' < $< >> $@
-
-$(srcdir)/blibpqdll.def: exports.txt
- echo '; DEF file for Borland C++ Builder' > $@
- echo 'LIBRARY BLIBPQ' >> $@
- echo 'DESCRIPTION "PostgreSQL Client Library"' >> $@
- echo 'EXPORTS' >> $@
- sed -e '/^#/d' -e 's/^\(.* \)\([0-9][0-9]*\)/ _\1@ \2/' < $< >> $@
- echo '' >> $@
- echo '; Aliases for MS compatible names' >> $@
- sed -e '/^#/d' -e 's/^\(.* \)\([0-9][0-9]*\)/ \1= _\1/' < $< | sed 's/ *$$//' >> $@
-
-# depend on Makefile.global to force rebuild on re-run of configure
-$(srcdir)/libpq.rc: libpq.rc.in $(top_builddir)/src/Makefile.global
- sed -e 's/\(VERSION.*\),0 *$$/\1,'`date '+%y%j' | sed 's/^0*//'`'/' < $< > $@
+# Depend on Makefile.global to force rebuild on re-run of configure.
+# (But libpq-dist.rc is shipped in the distribution for shell-less
+# installations and is only updated by distprep.)
+libpq.rc: $(top_builddir)/src/Makefile.global
fe-connect.o: fe-connect.c $(top_builddir)/src/port/pg_config_paths.h
install: all installdirs install-lib
$(INSTALL_DATA) $(srcdir)/libpq-fe.h '$(DESTDIR)$(includedir)'
+ $(INSTALL_DATA) $(srcdir)/libpq-events.h '$(DESTDIR)$(includedir)'
$(INSTALL_DATA) $(srcdir)/libpq-int.h '$(DESTDIR)$(includedir_internal)'
$(INSTALL_DATA) $(srcdir)/pqexpbuffer.h '$(DESTDIR)$(includedir_internal)'
$(INSTALL_DATA) $(srcdir)/pg_service.conf.sample '$(DESTDIR)$(datadir)/pg_service.conf.sample'
-installdirs:
- $(mkinstalldirs) '$(DESTDIR)$(libdir)' '$(DESTDIR)$(includedir)' '$(DESTDIR)$(includedir_internal)'
+installdirs: installdirs-lib
+ $(mkinstalldirs) '$(DESTDIR)$(includedir)' '$(DESTDIR)$(includedir_internal)'
uninstall: uninstall-lib
- rm -f '$(DESTDIR)$(includedir)/libpq-fe.h' '$(DESTDIR)$(includedir_internal)/libpq-int.h' '$(DESTDIR)$(includedir_internal)/pqexpbuffer.h' '$(DESTDIR)$(datadir)/pg_service.conf.sample'
+ rm -f '$(DESTDIR)$(includedir)/libpq-fe.h'
+ rm -f '$(DESTDIR)$(includedir)/libpq-events.h'
+ rm -f '$(DESTDIR)$(includedir_internal)/libpq-int.h'
+ rm -f '$(DESTDIR)$(includedir_internal)/pqexpbuffer.h'
+ rm -f '$(DESTDIR)$(datadir)/pg_service.conf.sample'
clean distclean: clean-lib
- rm -f $(OBJS) pg_config_paths.h crypt.c getaddrinfo.c inet_aton.c noblock.c pgstrcasecmp.c snprintf.c strerror.c open.c thread.c md5.c ip.c encnames.c wchar.c pthread.h
- rm -f pg_config_paths.h # Might be left over from a Win32 client-only build
+ rm -f $(OBJS) pg_config_paths.h crypt.c getaddrinfo.c inet_aton.c noblock.c open.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c thread.c md5.c ip.c encnames.c wchar.c win32error.c pgsleep.c pthread.h libpq.rc
+# Might be left over from a Win32 client-only build
+ rm -f pg_config_paths.h
-maintainer-clean: distclean
- rm -f $(srcdir)/libpqdll.def $(srcdir)/libpqddll.def $(srcdir)/blibpqdll.def $(srcdir)/libpq.rc
+maintainer-clean: distclean maintainer-clean-lib
+ rm -f $(srcdir)/libpq-dist.rc