\r
MakeDialog::MakeDialog(): wxDialog()\r
{\r
- this->bIsMake = true;\r
+ this->uCommand = TPI_COMMAND_CREATE;\r
}\r
\r
//******************************************************************************\r
// "Config"タブ\r
this->scLevel = XRCCTRL(* this, "scLevel", wxSpinCtrl);\r
this->scRR = XRCCTRL(* this, "scRR", wxSpinCtrl);\r
- this->tcPassword = XRCCTRL(* this, "tcPassword", wxTextCtrl);\r
- this->tcKeyfile = XRCCTRL(* this, "tcKeyfile", wxTextCtrl);\r
- this->cbSplitSize = XRCCTRL(* this, "cbSplitSize", wxComboBox);\r
- this->cbUnmask = XRCCTRL(* this, "cbUnmask", wxCheckBox);\r
- this->cbEncryptHeader = XRCCTRL(* this, "cbEncryptHeader", wxCheckBox);\r
this->cbSolid = XRCCTRL(* this, "cbSolid", wxCheckBox);\r
this->cbMMOptimize = XRCCTRL(* this, "cbMMOptimize", wxCheckBox);\r
+ this->cbCompressHeader = XRCCTRL(* this, "cbCompressHeader", wxCheckBox);\r
this->cbMakeSFX = XRCCTRL(* this, "cbMakeSFX", wxCheckBox);\r
// "Comment"タブ\r
this->tcComment = XRCCTRL(* this, "tcComment", wxTextCtrl);\r
+ // "Encryption"タブ\r
+ this->tcPassword = XRCCTRL(* this, "tcPassword", wxTextCtrl);\r
+ this->tcKeyfile = XRCCTRL(* this, "tcKeyfile", wxTextCtrl);\r
+ this->cbSplitSize = XRCCTRL(* this, "cbSplitSize", wxComboBox);\r
+ this->cbUnmask = XRCCTRL(* this, "cbUnmask", wxCheckBox);\r
+ this->cbEncryptHeader = XRCCTRL(* this, "cbEncryptHeader", wxCheckBox);\r
+ this->chEncryptMethod = XRCCTRL(* this, "chEncryptMethod", wxChoice);\r
// "Files"タブ\r
- this->lcFiles = XRCCTRL(* this, "lcFiles", wxListCtrl);\r
-\r
- // 2回目以降は無視。\r
- if (! this->cbDir->GetValue().IsEmpty())\r
- {\r
- return;\r
- }\r
+ this->lcFiles = XRCCTRL(* this, "lcFiles", myListCtrl2);\r
\r
// ListCtrlに列を追加。\r
+ // wxGTKでは直接wxLC_VIRTUALを指定しないと反映されない。\r
+ this->lcFiles->SetSingleStyle(wxLC_VIRTUAL);\r
this->lcFiles->InsertColumn(0, _("Input"), wxLIST_FORMAT_LEFT, 150);\r
- this->lcFiles->InsertColumn(1, _("Output"), wxLIST_FORMAT_LEFT, 300);\r
+ this->lcFiles->InsertColumn(1, _("Output"), wxLIST_FORMAT_LEFT, 290);\r
+ this->lcFiles->asInput = & this->files;\r
+ this->lcFiles->atDangerItem.SetTextColour(* wxRED);\r
+ this->lcFiles->atExistItem.SetTextColour(* wxBLUE);\r
\r
::wxXmlResource::Get()->Unload(L_DIR_S_XRC wxT("dlg_make.xrc"));\r
\r
// 事前準備。\r
MainFrame * frm_main = (MainFrame *) this->GetParent();\r
- wxString szArcPath = frm_main->fnArchive.GetPath(), szArcName = frm_main->fnArchive.GetName();\r
+ wxString szArcPath = frm_main->fnArchive.GetPath();\r
+\r
+ // 履歴読み込み。\r
+ this->myLoadHistory(CONF_HISTORY_PATH, this->cbDir);\r
+ this->myLoadHistory(CONF_HISTORY_NAME, this->cbFileName);\r
+\r
+ // パスを設定。\r
+ this->cbDir->SetValue(szArcPath);\r
\r
- // 展開時は各種コントロールの状態を変更する。\r
- if (! this->bIsMake)\r
+ // コマンド別の処理。\r
+ switch (this->uCommand)\r
{\r
- this->cbFileName->Disable();\r
- this->chType->Disable();\r
- this->chDirMake->Enable();\r
+ case TPI_COMMAND_EXTRACT:\r
+ // 初期値を設定。\r
+ this->SetTitle(_("Extract"));\r
+ this->tcComment->SetValue(frm_main->aiArchive.szComment);\r
+ this->cbDir->SetFocus();\r
+\r
+ // コントロールを無効化。\r
this->scLevel->Disable();\r
this->scRR->Disable();\r
- this->cbSplitSize->Disable();\r
- this->cbEncryptHeader->Disable();\r
this->cbSolid->Disable();\r
this->cbMMOptimize->Disable();\r
- this->cbMakeSFX->Disable();\r
this->tcComment->SetEditable(false);\r
+ this->cbEncryptHeader->Disable();\r
+ this->chEncryptMethod->Disable();\r
+ case TPI_COMMAND_ADD:\r
+ // コントロールを無効化(展開時も)。\r
+ this->cbFileName->Disable();\r
+ this->chType->Disable();\r
+ this->chDirMake->Enable();\r
+ this->cbSplitSize->Disable();\r
+ this->cbCompressHeader->Disable();\r
+ this->cbMakeSFX->Disable();\r
\r
- // 初期値を設定。\r
- this->tcComment->SetValue(frm_main->szComment);\r
-\r
- // 展開先を予測。ただしDTVスキャンに時間がかかる場合はスキップ可能。\r
- if (this->files.GetCount() < 3000 || ::AskDlg(_("This archive contains so many files that it takes long to check Directory Traversal Vulnerability(DTV) problem. If you are sure this archive is safe, you can skip this scanning process. Do you want to scan for DTV problem?"), this) == wxYES)\r
- {\r
- wxNotebookEvent e;\r
- e.SetSelection(-3);\r
- this->OnTabChanged(e);\r
- }\r
- }\r
+ // 書庫名を設定。\r
+ this->cbFileName->SetValue(frm_main->fnArchive.GetFullName());\r
\r
- // パス履歴読み込み。\r
- for (size_t i = 0; i < frm_main->conf.GetHistoryCount(CONF_HISTORY_PATH); i++)\r
- {\r
- wxString sz = frm_main->conf.ReadHistory(CONF_HISTORY_PATH, i);\r
- if (sz.IsEmpty())\r
+ // 書庫形式欄を設定。\r
+ this->afInfo.Add(frm_main->aiArchive.fiInfo);\r
+ this->chType->Append(frm_main->aiArchive.fiInfo.szTypeName);\r
+ this->chType->SetSelection(0);\r
{\r
- continue;\r
+ wxCommandEvent e;\r
+ e.SetInt(0);\r
+ this->OnChoice(e);\r
}\r
\r
- this->cbDir->Append(sz);\r
- }\r
-\r
- // 書庫名履歴読み込み。\r
- for (size_t i = 0; i < frm_main->conf.GetHistoryCount(CONF_HISTORY_NAME); i++)\r
- {\r
- wxString sz = frm_main->conf.ReadHistory(CONF_HISTORY_NAME, i);\r
- if (sz.IsEmpty())\r
+ if (this->uCommand != TPI_COMMAND_ADD)\r
{\r
- continue;\r
+ break;\r
}\r
-\r
- this->cbFileName->Append(sz);\r
- }\r
-\r
- // パスを設定。\r
- this->cbDir->SetValue(szArcPath);\r
-\r
- if (! this->bIsMake)\r
- {\r
- // 書庫名を設定。\r
- this->cbFileName->SetValue(szArcName);\r
-\r
- // 展開時の処理はここまで。\r
- return;\r
- }\r
-\r
- // 書庫名を設定。初期化の都合上.を付加しておく。\r
- this->cbFileName->SetValue(szArcName + wxT('.'));\r
-\r
- // ライブラリを検索。\r
- TPIHandle tpi;\r
- wxFileSystem fs;\r
- fs.ChangePathTo(L_DIR_B_LIB, true);\r
- wxString szTPIName = fs.FindFirst(wxT("*" TPI_EXT), wxFILE);\r
- while (! szTPIName.IsEmpty())\r
- {\r
- // ロード。\r
- if (tpi.InitLibrary(szTPIName, wxEmptyString, 0))\r
+ this->SetTitle(_("Add"));\r
+\r
+ // コントロールを無効化(追加時のみ)。\r
+ this->cbDir->Disable();\r
+ this->chDirMake->Disable();\r
+ XRCCTRL(* this, "btnDefault", wxButton)->Disable();\r
+ XRCCTRL(* this, "btnDesktop", wxButton)->Disable();\r
+ XRCCTRL(* this, "btnCurrent", wxButton)->Disable();\r
+ XRCCTRL(* this, "btnBrowse", wxButton)->Disable();\r
+ break;\r
+ case TPI_COMMAND_CREATE:\r
+ this->SetTitle(_("Create"));\r
+\r
+ // 書庫名を設定。初期化の都合上.を付加しておく。\r
+ this->cbFileName->SetValue(frm_main->fnArchive.GetName() + wxT('.'));\r
+ this->cbFileName->SetFocus();\r
+\r
+ // ライブラリを検索。\r
+ TPIHandle tpi;\r
+ wxDir fs(L_DIR_B_LIB);\r
+ wxString szTPIName;\r
+ if (fs.GetFirst(& szTPIName,wxT("*" TPI_EXT)))\r
{\r
- // 対応する形式名を取得。\r
- TPI_FORMATINFO fiInfo;\r
- if (tpi.GetFormatInformation(& fiInfo, true))\r
+ do\r
{\r
- do\r
+ // ロード。\r
+ wxString szLibName = L_DIR_B_LIB + szTPIName;\r
+ if (tpi.InitLibrary(szLibName, wxEmptyString))\r
{\r
- if (fiInfo.llSupportedCommand & TPI_COMMAND_ADD && (this->files.GetCount() == 1 || fiInfo.fArchive))\r
+ // 対応する形式名を取得。\r
+ TPI_FORMATINFO fiInfo;\r
+ if (tpi.GetFormatInformation(& fiInfo, true))\r
{\r
- fiInfo.szTPIName = szTPIName;\r
- this->afInfo.Add(fiInfo);\r
- this->chType->Append(fiInfo.szTypeName);\r
+ do\r
+ {\r
+ if (fiInfo.eSupportedCommand & TPI_COMMAND_CREATE && (this->lcFiles->asInput->GetCount() == 1 || fiInfo.fArchive))\r
+ {\r
+ fiInfo.szTPIName = szLibName;\r
+ this->afInfo.Add(fiInfo);\r
+ this->chType->Append(fiInfo.szTypeName);\r
+ }\r
+ }\r
+ while (tpi.GetFormatInformation(& fiInfo));\r
}\r
+ tpi.FreeLibrary();\r
}\r
- while (tpi.GetFormatInformation(& fiInfo, false));\r
}\r
- tpi.FreeLibrary();\r
+ while (fs.GetNext(& szTPIName));\r
+ }\r
+\r
+ if (this->chType->GetCount() == 0)\r
+ {\r
+ // 形式の候補が一つもない場合。\r
+ XRCCTRL(* this, "btnOK", wxButton)->Disable();\r
+ break;\r
}\r
- szTPIName = fs.FindNext();\r
+\r
+ // とりあえず最初の形式にしておく。\r
+ this->chType->SetSelection(0);\r
+ wxCommandEvent e;\r
+ e.SetInt(0);\r
+ this->OnChoice(e);\r
+ break;\r
+ }\r
+\r
+ // 展開/格納先を予測。ただしDTVスキャンに時間がかかる場合はスキップ可能。\r
+ size_t n = this->lcFiles->asInput->GetCount();\r
+ this->lcFiles->asOutput.Alloc(n);\r
+ this->lcFiles->apItem.Alloc(n);\r
+ if (n < 3000 ||\r
+ ::AskDlg(\r
+ this->uCommand == TPI_COMMAND_EXTRACT ?\r
+ _("This archive contains so many files that it takes long to check Directory Traversal Vulnerability(DTV) problem. If you are sure this archive is safe, you can skip this scanning process. Do you want to scan for DTV problem?") :\r
+ _("The files you want to store are too many, so it takes long to check Directory Traversal Vulnerability(DTV) problem. If you are sure the path of the files are no problem, you can skip this scanning process. Do you want to scan for DTV problem?"),\r
+ this\r
+ ) == wxYES)\r
+ {\r
+ wxNotebookEvent e;\r
+ e.SetSelection(4);\r
+ this->OnTabChanged(e);\r
}\r
\r
- // とりあえず最初の形式にしておく。\r
- this->chType->SetSelection(0);\r
- wxCommandEvent e;\r
- e.SetInt(0);\r
- this->OnChoice(e);\r
+ this->Raise();\r
}\r
\r
void MakeDialog::OnBtnDefault(wxCommandEvent&)\r
\r
void MakeDialog::OnBtnDesktop(wxCommandEvent&)\r
{\r
- wxFileName fn(wxFileName::GetHomeDir(), wxT("Desktop"));\r
- this->cbDir->SetValue(fn.GetFullPath());\r
+ this->cbDir->SetValue(wxFileName(wxFileName::GetHomeDir(), wxT("Desktop")).GetFullPath());\r
}\r
\r
void MakeDialog::OnBtnCurrent(wxCommandEvent&)\r
\r
void MakeDialog::OnBtnBrowseKF(wxCommandEvent&)\r
{\r
- wxFileDialog fd(this);\r
- fd.SetWindowStyleFlag(wxFD_OPEN | wxFD_FILE_MUST_EXIST);\r
+ wxFileDialog fd(this, _("Choose a key file"), wxEmptyString, wxEmptyString, wxFileSelectorDefaultWildcardStr, wxFD_OPEN | wxFD_FILE_MUST_EXIST);\r
if (fd.ShowModal() == wxID_OK)\r
{\r
this->tcKeyfile->SetValue(fd.GetPath());\r
void MakeDialog::OnBtnOK(wxCommandEvent&)\r
{\r
// 履歴書き込み。\r
- MainFrame * frm_main = (MainFrame *) this->GetParent();\r
- wxFileName fnCurrent(this->cbDir->GetValue(), this->bIsMake ? this->cbFileName->GetValue() : (wxString) wxEmptyString);\r
- frm_main->conf.WriteHistory(CONF_HISTORY_FULL, fnCurrent.GetFullPath());\r
- frm_main->conf.WriteHistory(CONF_HISTORY_PATH, fnCurrent.GetPath());\r
- frm_main->conf.WriteHistory(CONF_HISTORY_NAME, fnCurrent.GetFullName());\r
-\r
+ if (this->uCommand != TPI_COMMAND_ADD)\r
+ {\r
+ MainFrame * frm_main = (MainFrame *) this->GetParent();\r
+ wxFileName fnCurrent(this->cbDir->GetValue(), this->uCommand == TPI_COMMAND_CREATE ? this->cbFileName->GetValue() : (wxString) wxEmptyString);\r
+ frm_main->conf.WriteHistory(CONF_HISTORY_FULL, fnCurrent.GetFullPath());\r
+ frm_main->conf.WriteHistory(CONF_HISTORY_PATH, fnCurrent.GetPath());\r
+ frm_main->conf.WriteHistory(CONF_HISTORY_NAME, fnCurrent.GetFullName());\r
+ }\r
this->EndModal(wxID_OK);\r
}\r
\r
{\r
TPI_FORMATINFO * fiInfo = & this->afInfo[e.GetInt()];\r
// 形式が各種設定に対応しているか。\r
- this->scLevel->SetRange(fiInfo->sCompressLevelMin, fiInfo->sCompressLevelMax);\r
- this->scLevel->SetValue(fiInfo->sCompressLevelMax);\r
- this->scLevel->Enable(fiInfo->sCompressLevelMin != fiInfo->sCompressLevelMax);\r
- this->scRR->SetRange(fiInfo->sRecoveryRecordMin, fiInfo->sRecoveryRecordMax);\r
- this->scRR->SetValue(fiInfo->sRecoveryRecordMin);\r
- this->scRR->Enable(fiInfo->sRecoveryRecordMin != fiInfo->sRecoveryRecordMax);\r
- this->cbSplitSize->Enable(fiInfo->fMultiVolume);\r
+ // 作成時/追加時/展開時設定。\r
this->tcPassword->Enable(fiInfo->fEncryptPassword);\r
- this->cbUnmask->Enable(fiInfo->fEncryptPassword);\r
this->tcKeyfile->Enable(fiInfo->fEncryptKeyFile);\r
+ this->cbUnmask->Enable(fiInfo->fEncryptPassword);\r
+ this->chEncryptMethod->Enable(fiInfo->fEncryptPassword || fiInfo->fEncryptKeyFile);\r
+ XRCCTRL(* this, "btnBrowseKF", wxButton)->Enable(fiInfo->fEncryptKeyFile);\r
+ if (this->uCommand == TPI_COMMAND_EXTRACT)\r
+ {\r
+ return;\r
+ }\r
+\r
+ // 作成時/追加時設定。\r
+ this->scLevel->SetRange(fiInfo->nCompressLevelMin, fiInfo->nCompressLevelMax);\r
+ this->scLevel->SetValue(fiInfo->nCompressLevelMax);\r
+ this->scLevel->Enable(fiInfo->nCompressLevelMin != fiInfo->nCompressLevelMax);\r
+ this->scRR->SetRange(fiInfo->nRecoveryRecordMin, fiInfo->nRecoveryRecordMax);\r
+ this->scRR->SetValue(fiInfo->nRecoveryRecordMin);\r
+ this->scRR->Enable(fiInfo->nRecoveryRecordMin != fiInfo->nRecoveryRecordMax);\r
this->cbEncryptHeader->Enable(fiInfo->fEncryptHeader);\r
- this->cbMakeSFX->Enable(fiInfo->fSFX);\r
+ this->cbCompressHeader->Enable(fiInfo->fCompressHeader);\r
this->cbSolid->Enable(fiInfo->fSolid);\r
this->cbMMOptimize->Enable(fiInfo->fMMOptimize);\r
this->tcComment->Enable(fiInfo->fComment);\r
+ if (this->uCommand == TPI_COMMAND_ADD)\r
+ {\r
+ return;\r
+ }\r
+\r
+ // 作成時設定。\r
+ this->cbSplitSize->Enable(fiInfo->fMultiVolume);\r
+ this->cbMakeSFX->Enable(fiInfo->fSFX);\r
\r
wxFileName fn(this->cbFileName->GetValue());\r
fn.SetExt(this->cbMakeSFX->IsEnabled() && this->cbMakeSFX->IsChecked() ? EXE_EXT : fiInfo->szSuffix.BeforeFirst(wxT(';')));\r
void MakeDialog::OnTabChanged(wxNotebookEvent& e)\r
{\r
// "Files"タブのときは処理。\r
- bool bReallyShow = e.GetSelection() == 3;\r
- if (abs(e.GetSelection()) != 3)\r
+ if (e.GetSelection() != 4)\r
{\r
return;\r
}\r
+ this->lcFiles->DeleteAllItems();\r
+ this->lcFiles->asOutput.Empty();\r
+ this->lcFiles->apItem.Empty();\r
\r
- // "Files"タブを表示する初回かどうか。\r
- if (bReallyShow && this->lcFiles->GetItemCount() == 0)\r
+ bool fDTVWarning = false;\r
+ switch (this->uCommand)\r
{\r
- // ファイルリストを追加。\r
- for (size_t i = 0; i < this->files.GetCount(); i++)\r
- {\r
- this->lcFiles->InsertItem(i, this->files[i]);\r
- }\r
- }\r
-\r
- if (bIsMake)\r
- {\r
- // 格納パスを推測。\r
- for (size_t i = 0; i < this->files.GetCount(); i++)\r
- {\r
- if (bReallyShow)\r
- {\r
- this->lcFiles->SetItem(i, 1, this->files[i]);\r
- }\r
- }\r
- }\r
- else\r
+ case TPI_COMMAND_EXTRACT:\r
{\r
// ファイルの出力先を推測。\r
wxString szOutputRootDir = WillMakeDirByArcName((MainFrame *) this->GetParent(), this) ? MakeDirPath(wxFileName::DirName(this->cbDir->GetValue()), wxFileName(this->cbFileName->GetValue()).GetName(), false).GetPath() : this->cbDir->GetValue();\r
\r
// 各ファイルにパスを付加。\r
- bool fDTVWarning = false;\r
- for (size_t i = 0; i < this->files.GetCount(); i++)\r
+ for (size_t i = 0; i < this->lcFiles->asInput->GetCount(); i++)\r
{\r
wxString szOutputFile = szOutputRootDir + wxFileName::GetPathSeparator();\r
- wxFileName fnStored(this->files[i]);\r
+ wxFileName fnStored(this->lcFiles->asInput->Item(i));\r
if (! this->cbIgnorePath->IsChecked())\r
{\r
szOutputFile += fnStored.GetPathWithSep();\r
}\r
- szOutputFile += fnStored.GetFullName();\r
- wxFileName fnOutput(szOutputFile);\r
- if (! fnOutput.Normalize() || ! fnOutput.GetFullPath().StartsWith(szOutputRootDir))\r
+ wxFileName fnOutput(szOutputFile + fnStored.GetFullName());\r
+ if (! fnOutput.Normalize(wxPATH_NORM_DOTS | wxPATH_NORM_ABSOLUTE | wxPATH_NORM_LONG) || ! fnOutput.GetFullPath().StartsWith(szOutputRootDir))\r
{\r
fDTVWarning = true;\r
- if (bReallyShow)\r
- {\r
- this->lcFiles->SetItemTextColour(i, * wxRED);\r
- }\r
+ this->lcFiles->apItem.Add(& this->lcFiles->atDangerItem);\r
}\r
- if (bReallyShow)\r
+ else\r
{\r
- this->lcFiles->SetItem(i, 1, fnOutput.GetFullPath());\r
+ this->lcFiles->apItem.Add(fnOutput.FileExists() || ::wxDirExists(fnOutput.GetFullPath()) ? & this->lcFiles->atExistItem : NULL);\r
}\r
+ this->lcFiles->asOutput.Add(fnOutput.GetFullPath());\r
}\r
-\r
- if (fDTVWarning && ::AskDlg(_("This archive may have Directory Traversal Vulnerability(DTV) problem, and some danger files may be extracted to the unexpected system directory! It is strongly recommended to ignore file path. Would you like to do so?"), this) == wxYES)\r
+ break;\r
+ }\r
+ case TPI_COMMAND_ADD:\r
+ case TPI_COMMAND_CREATE:\r
+ // 格納パスを推測。\r
+ for (size_t i = 0; i < this->lcFiles->asInput->GetCount(); i++)\r
{\r
- this->cbIgnorePath->SetValue(true);\r
- if (bReallyShow)\r
+ wxFileName fnStored(this->lcFiles->asInput->Item(i));\r
+ this->lcFiles->asOutput.Add(this->cbIgnorePath->IsChecked() ? fnStored.GetFullName() : fnStored.GetFullPath());\r
+ fnStored = wxFileName(this->lcFiles->asOutput.Item(i));\r
+ if (fnStored.GetPathWithSep(wxPATH_UNIX).Find(wxT("../")) != wxNOT_FOUND)\r
+ {\r
+ fDTVWarning = true;\r
+ this->lcFiles->apItem.Add(& this->lcFiles->atDangerItem);\r
+ }\r
+ else\r
{\r
- this->OnTabChanged(e);\r
+ this->lcFiles->apItem.Add(NULL);\r
}\r
}\r
+ break;\r
+ }\r
+\r
+ // DTV検査で異常があれば警告。\r
+ if (fDTVWarning)\r
+ {\r
+ wxString sz;\r
+ sz.Printf(\r
+ _("This archive may have Directory Traversal Vulnerability(DTV) problem, %s It is strongly recommended to ignore file path. Would you like to do so?"),\r
+ (this->uCommand == TPI_COMMAND_EXTRACT ?\r
+ _("and some danger files may be extracted to the unexpected system directory!") :\r
+ _("and some danger files may be stored!")\r
+ )\r
+ );\r
+ if (::AskDlg(sz, this) == wxYES)\r
+ {\r
+ this->cbIgnorePath->SetValue(true);\r
+ this->OnTabChanged(e);\r
+ }\r
}\r
+\r
+ // リストビューに表示。\r
+ this->lcFiles->SetItemCount(this->lcFiles->asInput->GetCount());\r
+}\r
+\r
+void MakeDialog::myLoadHistory(myConfigId confId, wxComboBox * cb)\r
+{\r
+ MainFrame * frm_main = (MainFrame *) this->GetParent();\r
+ for (size_t i = 0; i < frm_main->conf.GetHistoryCount(confId); i++)\r
+ {\r
+ wxString sz = frm_main->conf.ReadHistory(confId, i);\r
+ if (! sz.IsEmpty())\r
+ {\r
+ cb->Append(sz);\r
+ }\r
+ }\r
+}\r
+\r
+//******************************************************************************\r
+// myListCtrl2\r
+//******************************************************************************\r
+\r
+IMPLEMENT_DYNAMIC_CLASS(myListCtrl2, wxListView)\r
+\r
+//******************************************************************************\r
+// Event handler.\r
+//******************************************************************************\r
+wxString myListCtrl2::OnGetItemText(long i, long column) const\r
+{\r
+ // リストビューに項目を追加。\r
+ switch (column)\r
+ {\r
+ case 0:\r
+ return this->asInput->Item(i);\r
+ case 1:\r
+ return this->asOutput[i];\r
+ default:\r
+ return wxEmptyString;\r
+ }\r
+}\r
+\r
+wxListItemAttr * myListCtrl2::OnGetItemAttr(long i) const\r
+{\r
+ return (wxListItemAttr *) this->apItem[i];\r
}\r
OSDN Git Service
