#include "smp_api.h"
+#include "btm_api_types.h"
+
#ifdef __cplusplus
extern "C" {
#endif
/*****************************************************************************
** DEVICE CONTROL and COMMON
*****************************************************************************/
-/*****************************
-** Device Control Constants
-******************************/
-/* Maximum number of bytes allowed for vendor specific command parameters */
-#define BTM_MAX_VENDOR_SPECIFIC_LEN HCI_COMMAND_SIZE
-
-/* BTM application return status codes */
-enum
-{
- BTM_SUCCESS = 0, /* 0 Command succeeded */
- BTM_CMD_STARTED, /* 1 Command started OK. */
- BTM_BUSY, /* 2 Device busy with another command */
- BTM_NO_RESOURCES, /* 3 No resources to issue command */
- BTM_MODE_UNSUPPORTED, /* 4 Request for 1 or more unsupported modes */
- BTM_ILLEGAL_VALUE, /* 5 Illegal parameter value */
- BTM_WRONG_MODE, /* 6 Device in wrong mode for request */
- BTM_UNKNOWN_ADDR, /* 7 Unknown remote BD address */
- BTM_DEVICE_TIMEOUT, /* 8 Device timeout */
- BTM_BAD_VALUE_RET, /* 9 A bad value was received from HCI */
- BTM_ERR_PROCESSING, /* 10 Generic error */
- BTM_NOT_AUTHORIZED, /* 11 Authorization failed */
- BTM_DEV_RESET, /* 12 Device has been reset */
- BTM_CMD_STORED, /* 13 request is stored in control block */
- BTM_ILLEGAL_ACTION, /* 14 state machine gets illegal command */
- BTM_DELAY_CHECK, /* 15 delay the check on encryption */
- BTM_SCO_BAD_LENGTH, /* 16 Bad SCO over HCI data length */
- BTM_SUCCESS_NO_SECURITY, /* 17 security passed, no security set */
- BTM_FAILED_ON_SECURITY, /* 18 security failed */
- BTM_REPEATED_ATTEMPTS, /* 19 repeated attempts for LE security requests */
- BTM_MODE4_LEVEL4_NOT_SUPPORTED /* 20 Secure Connections Only Mode can't be supported */
-};
-
-typedef uint8_t tBTM_STATUS;
-
-#if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE)
-typedef enum
-{
- BTM_BR_ONE, /*0 First state or BR/EDR scan 1*/
- BTM_BLE_ONE, /*1BLE scan 1*/
- BTM_BR_TWO, /*2 BR/EDR scan 2*/
- BTM_BLE_TWO, /*3 BLE scan 2*/
- BTM_FINISH, /*4 End of Interleave Scan, or normal scan*/
- BTM_NO_INTERLEAVING /*5 No Interleaving*/
-}btm_inq_state;
-#endif
-
-
-
-/*************************
-** Device Control Types
-**************************/
-#define BTM_DEVICE_ROLE_BR 0x01
-#define BTM_DEVICE_ROLE_DUAL 0x02
-#define BTM_MAX_DEVICE_ROLE BTM_DEVICE_ROLE_DUAL
-typedef UINT8 tBTM_DEVICE_ROLE;
-
-/* Device name of peer (may be truncated to save space in BTM database) */
-typedef UINT8 tBTM_BD_NAME[BTM_MAX_REM_BD_NAME_LEN + 1];
-
-/* Structure returned with local version information */
-typedef struct
-{
- UINT8 hci_version;
- UINT16 hci_revision;
- UINT8 lmp_version;
- UINT16 manufacturer;
- UINT16 lmp_subversion;
-} tBTM_VERSION_INFO;
-
-/* Structure returned with Vendor Specific Command complete callback */
-typedef struct
-{
- UINT16 opcode;
- UINT16 param_len;
- UINT8 *p_param_buf;
-} tBTM_VSC_CMPL;
-
-#define BTM_VSC_CMPL_DATA_SIZE (BTM_MAX_VENDOR_SPECIFIC_LEN + sizeof(tBTM_VSC_CMPL))
-/**************************************************
-** Device Control and General Callback Functions
-***************************************************/
-/* Callback function for when device status changes. Appl must poll for
-** what the new state is (BTM_IsDeviceUp). The event occurs whenever the stack
-** has detected that the controller status has changed. This asynchronous event
-** is enabled/disabled by calling BTM_RegisterForDeviceStatusNotif().
-*/
-enum
-{
- BTM_DEV_STATUS_UP,
- BTM_DEV_STATUS_DOWN,
- BTM_DEV_STATUS_CMD_TOUT
-};
-
-typedef UINT8 tBTM_DEV_STATUS;
-
-
-typedef void (tBTM_DEV_STATUS_CB) (tBTM_DEV_STATUS status);
-
-
-/* Callback function for when a vendor specific event occurs. The length and
-** array of returned parameter bytes are included. This asynchronous event
-** is enabled/disabled by calling BTM_RegisterForVSEvents().
-*/
-typedef void (tBTM_VS_EVT_CB) (UINT8 len, UINT8 *p);
-
-
-/* General callback function for notifying an application that a synchronous
-** BTM function is complete. The pointer contains the address of any returned data.
-*/
-typedef void (tBTM_CMPL_CB) (void *p1);
-
-/* VSC callback function for notifying an application that a synchronous
-** BTM function is complete. The pointer contains the address of any returned data.
-*/
-typedef void (tBTM_VSC_CMPL_CB) (tBTM_VSC_CMPL *p1);
-
-/* Callback for apps to check connection and inquiry filters.
-** Parameters are the BD Address of remote and the Dev Class of remote.
-** If the app returns none zero, the connection or inquiry result will be dropped.
-*/
-typedef UINT8 (tBTM_FILTER_CB) (BD_ADDR bd_addr, DEV_CLASS dc);
-
-/*****************************************************************************
-** DEVICE DISCOVERY - Inquiry, Remote Name, Discovery, Class of Device
-*****************************************************************************/
-/*******************************
-** Device Discovery Constants
-********************************/
-/* Discoverable modes */
-#define BTM_NON_DISCOVERABLE 0
-#define BTM_LIMITED_DISCOVERABLE 1
-#define BTM_GENERAL_DISCOVERABLE 2
-#define BTM_DISCOVERABLE_MASK (BTM_LIMITED_DISCOVERABLE|BTM_GENERAL_DISCOVERABLE)
-#define BTM_MAX_DISCOVERABLE BTM_GENERAL_DISCOVERABLE
-/* high byte for BLE Discoverable modes */
-#define BTM_BLE_NON_DISCOVERABLE 0x0000
-#define BTM_BLE_LIMITED_DISCOVERABLE 0x0100
-#define BTM_BLE_GENERAL_DISCOVERABLE 0x0200
-#define BTM_BLE_MAX_DISCOVERABLE BTM_BLE_GENERAL_DISCOVERABLE
-#define BTM_BLE_DISCOVERABLE_MASK (BTM_BLE_NON_DISCOVERABLE|BTM_BLE_LIMITED_DISCOVERABLE|BTM_BLE_GENERAL_DISCOVERABLE)
-
-/* Connectable modes */
-#define BTM_NON_CONNECTABLE 0
-#define BTM_CONNECTABLE 1
-#define BTM_CONNECTABLE_MASK (BTM_NON_CONNECTABLE | BTM_CONNECTABLE)
-/* high byte for BLE Connectable modes */
-#define BTM_BLE_NON_CONNECTABLE 0x0000
-#define BTM_BLE_CONNECTABLE 0x0100
-#define BTM_BLE_MAX_CONNECTABLE BTM_BLE_CONNECTABLE
-#define BTM_BLE_CONNECTABLE_MASK (BTM_BLE_NON_CONNECTABLE | BTM_BLE_CONNECTABLE)
-
-/* Inquiry modes
- * Note: These modes are associated with the inquiry active values (BTM_*ACTIVE) */
-#define BTM_INQUIRY_NONE 0
-#define BTM_GENERAL_INQUIRY 0x01
-#define BTM_LIMITED_INQUIRY 0x02
-#define BTM_BR_INQUIRY_MASK (BTM_GENERAL_INQUIRY | BTM_LIMITED_INQUIRY)
-
-/* high byte of inquiry mode for BLE inquiry mode */
-#define BTM_BLE_INQUIRY_NONE 0x00
-#define BTM_BLE_GENERAL_INQUIRY 0x10
-#define BTM_BLE_LIMITED_INQUIRY 0x20
-#define BTM_BLE_INQUIRY_MASK (BTM_BLE_GENERAL_INQUIRY|BTM_BLE_LIMITED_INQUIRY)
-
-/* BTM_IsInquiryActive return values (Bit Mask)
- * Note: These bit masks are associated with the inquiry modes (BTM_*_INQUIRY) */
-#define BTM_INQUIRY_INACTIVE 0x0 /* no inquiry in progress */
-#define BTM_GENERAL_INQUIRY_ACTIVE BTM_GENERAL_INQUIRY /* a general inquiry is in progress */
-#define BTM_LIMITED_INQUIRY_ACTIVE BTM_LIMITED_INQUIRY /* a limited inquiry is in progress */
-#define BTM_PERIODIC_INQUIRY_ACTIVE 0x8 /* a periodic inquiry is active */
-#define BTM_SSP_INQUIRY_ACTIVE 0x4 /* SSP is active, so inquiry is disallowed (work around for FW bug) */
-#define BTM_LE_GENERAL_INQUIRY_ACTIVE BTM_BLE_GENERAL_INQUIRY /* a general inquiry is in progress */
-#define BTM_LE_LIMITED_INQUIRY_ACTIVE BTM_BLE_LIMITED_INQUIRY /* a limited inquiry is in progress */
-
-/* inquiry activity mask */
-#define BTM_BR_INQ_ACTIVE_MASK (BTM_GENERAL_INQUIRY_ACTIVE|BTM_LIMITED_INQUIRY_ACTIVE|BTM_PERIODIC_INQUIRY_ACTIVE) /* BR/EDR inquiry activity mask */
-#define BTM_BLE_SCAN_ACTIVE_MASK 0xF0 /* LE scan activity mask */
-#define BTM_BLE_INQ_ACTIVE_MASK (BTM_LE_GENERAL_INQUIRY_ACTIVE|BTM_LE_LIMITED_INQUIRY_ACTIVE) /* LE inquiry activity mask*/
-#define BTM_INQUIRY_ACTIVE_MASK (BTM_BR_INQ_ACTIVE_MASK | BTM_BLE_INQ_ACTIVE_MASK) /* inquiry activity mask */
-
-/* Define scan types */
-#define BTM_SCAN_TYPE_STANDARD 0
-#define BTM_SCAN_TYPE_INTERLACED 1 /* 1.2 devices only */
-
-/* Define inquiry results mode */
-#define BTM_INQ_RESULT_STANDARD 0
-#define BTM_INQ_RESULT_WITH_RSSI 1
-#define BTM_INQ_RESULT_EXTENDED 2
-
-#define BTM_INQ_RES_IGNORE_RSSI 0x7f /* RSSI value not supplied (ignore it) */
-
-/* Inquiry Filter Condition types (see tBTM_INQ_PARMS) */
-#define BTM_CLR_INQUIRY_FILTER 0 /* Inquiry Filtering is turned off */
-#define BTM_FILTER_COND_DEVICE_CLASS HCI_FILTER_COND_DEVICE_CLASS /* Filter on device class */
-#define BTM_FILTER_COND_BD_ADDR HCI_FILTER_COND_BD_ADDR /* Filter on device addr */
-
-/* State of the remote name retrieval during inquiry operations.
-** Used in the tBTM_INQ_INFO structure, and returned in the
-** BTM_InqDbRead, BTM_InqDbFirst, and BTM_InqDbNext functions.
-** The name field is valid when the state returned is
-** BTM_INQ_RMT_NAME_DONE */
-#define BTM_INQ_RMT_NAME_EMPTY 0
-#define BTM_INQ_RMT_NAME_PENDING 1
-#define BTM_INQ_RMT_NAME_DONE 2
-#define BTM_INQ_RMT_NAME_FAILED 3
-
-/*********************************
- *** Class of Device constants ***
- *********************************/
-#define BTM_FORMAT_TYPE_1 0x00
-
-/****************************
-** minor device class field
-*****************************/
-
-/* 0x00 is used as unclassified for all minor device classes */
-#define BTM_COD_MINOR_UNCLASSIFIED 0x00
-
-/* minor device class field for Computer Major Class */
-/* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */
-#define BTM_COD_MINOR_DESKTOP_WORKSTATION 0x04
-#define BTM_COD_MINOR_SERVER_COMPUTER 0x08
-#define BTM_COD_MINOR_LAPTOP 0x0C
-#define BTM_COD_MINOR_HANDHELD_PC_PDA 0x10 /* clam shell */
-#define BTM_COD_MINOR_PALM_SIZE_PC_PDA 0x14
-#define BTM_COD_MINOR_WEARABLE_COMPUTER 0x18 /* watch sized */
-
-/* minor device class field for Phone Major Class */
-/* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */
-#define BTM_COD_MINOR_CELLULAR 0x04
-#define BTM_COD_MINOR_CORDLESS 0x08
-#define BTM_COD_MINOR_SMART_PHONE 0x0C
-#define BTM_COD_MINOR_WIRED_MDM_V_GTWY 0x10 /* wired modem or voice gatway */
-#define BTM_COD_MINOR_ISDN_ACCESS 0x14
-
-/* minor device class field for LAN Access Point Major Class */
-/* Load Factor Field bit 5-7 */
-#define BTM_COD_MINOR_FULLY_AVAILABLE 0x00
-#define BTM_COD_MINOR_1_17_UTILIZED 0x20
-#define BTM_COD_MINOR_17_33_UTILIZED 0x40
-#define BTM_COD_MINOR_33_50_UTILIZED 0x60
-#define BTM_COD_MINOR_50_67_UTILIZED 0x80
-#define BTM_COD_MINOR_67_83_UTILIZED 0xA0
-#define BTM_COD_MINOR_83_99_UTILIZED 0xC0
-#define BTM_COD_MINOR_NO_SERVICE_AVAILABLE 0xE0
-/* sub-Field bit 2-4 */
-/* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */
-
-/* minor device class field for Audio/Video Major Class */
-/* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */
-#define BTM_COD_MINOR_CONFM_HEADSET 0x04
-#define BTM_COD_MINOR_CONFM_HANDSFREE 0x08
-#define BTM_COD_MINOR_MICROPHONE 0x10
-#define BTM_COD_MINOR_LOUDSPEAKER 0x14
-#define BTM_COD_MINOR_HEADPHONES 0x18
-#define BTM_COD_MINOR_PORTABLE_AUDIO 0x1C
-#define BTM_COD_MINOR_CAR_AUDIO 0x20
-#define BTM_COD_MINOR_SET_TOP_BOX 0x24
-#define BTM_COD_MINOR_HIFI_AUDIO 0x28
-#define BTM_COD_MINOR_VCR 0x2C
-#define BTM_COD_MINOR_VIDEO_CAMERA 0x30
-#define BTM_COD_MINOR_CAMCORDER 0x34
-#define BTM_COD_MINOR_VIDEO_MONITOR 0x38
-#define BTM_COD_MINOR_VIDDISP_LDSPKR 0x3C
-#define BTM_COD_MINOR_VIDEO_CONFERENCING 0x40
-#define BTM_COD_MINOR_GAMING_TOY 0x48
-
-/* minor device class field for Peripheral Major Class */
-/* Bits 6-7 independently specify mouse, keyboard, or combo mouse/keyboard */
-#define BTM_COD_MINOR_KEYBOARD 0x40
-#define BTM_COD_MINOR_POINTING 0x80
-#define BTM_COD_MINOR_COMBO 0xC0
-/* Bits 2-5 OR'd with selection from bits 6-7 */
-/* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */
-#define BTM_COD_MINOR_JOYSTICK 0x04
-#define BTM_COD_MINOR_GAMEPAD 0x08
-#define BTM_COD_MINOR_REMOTE_CONTROL 0x0C
-#define BTM_COD_MINOR_SENSING_DEVICE 0x10
-#define BTM_COD_MINOR_DIGITIZING_TABLET 0x14
-#define BTM_COD_MINOR_CARD_READER 0x18 /* e.g. SIM card reader */
-#define BTM_COD_MINOR_DIGITAL_PAN 0x1C
-#define BTM_COD_MINOR_HAND_SCANNER 0x20
-#define BTM_COD_MINOR_HAND_GESTURAL_INPUT 0x24
-
-/* minor device class field for Imaging Major Class */
-/* Bits 5-7 independently specify display, camera, scanner, or printer */
-#define BTM_COD_MINOR_DISPLAY 0x10
-#define BTM_COD_MINOR_CAMERA 0x20
-#define BTM_COD_MINOR_SCANNER 0x40
-#define BTM_COD_MINOR_PRINTER 0x80
-/* Bits 2-3 Reserved */
-/* #define BTM_COD_MINOR_UNCLASSIFIED 0x00 */
-
-/* minor device class field for Wearable Major Class */
-/* Bits 2-7 meaningful */
-#define BTM_COD_MINOR_WRIST_WATCH 0x04
-#define BTM_COD_MINOR_PAGER 0x08
-#define BTM_COD_MINOR_JACKET 0x0C
-#define BTM_COD_MINOR_HELMET 0x10
-#define BTM_COD_MINOR_GLASSES 0x14
-
-/* minor device class field for Toy Major Class */
-/* Bits 2-7 meaningful */
-#define BTM_COD_MINOR_ROBOT 0x04
-#define BTM_COD_MINOR_VEHICLE 0x08
-#define BTM_COD_MINOR_DOLL_ACTION_FIGURE 0x0C
-#define BTM_COD_MINOR_CONTROLLER 0x10
-#define BTM_COD_MINOR_GAME 0x14
-
-/* minor device class field for Health Major Class */
-/* Bits 2-7 meaningful */
-#define BTM_COD_MINOR_BLOOD_MONITOR 0x04
-#define BTM_COD_MINOR_THERMOMETER 0x08
-#define BTM_COD_MINOR_WEIGHING_SCALE 0x0C
-#define BTM_COD_MINOR_GLUCOSE_METER 0x10
-#define BTM_COD_MINOR_PULSE_OXIMETER 0x14
-#define BTM_COD_MINOR_HEART_PULSE_MONITOR 0x18
-#define BTM_COD_MINOR_HEALTH_DATA_DISPLAY 0x1C
-#define BTM_COD_MINOR_STEP_COUNTER 0x20
-#define BTM_COD_MINOR_BODY_COM_ANALYZER 0x24
-#define BTM_COD_MINOR_PEAK_FLOW_MONITOR 0x28
-#define BTM_COD_MINOR_MEDICATION_MONITOR 0x2C
-#define BTM_COD_MINOR_KNEE_PROSTHESIS 0x30
-#define BTM_COD_MINOR_ANKLE_PROSTHESIS 0x34
-
-
-/***************************
-** major device class field
-****************************/
-#define BTM_COD_MAJOR_MISCELLANEOUS 0x00
-#define BTM_COD_MAJOR_COMPUTER 0x01
-#define BTM_COD_MAJOR_PHONE 0x02
-#define BTM_COD_MAJOR_LAN_ACCESS_PT 0x03
-#define BTM_COD_MAJOR_AUDIO 0x04
-#define BTM_COD_MAJOR_PERIPHERAL 0x05
-#define BTM_COD_MAJOR_IMAGING 0x06
-#define BTM_COD_MAJOR_WEARABLE 0x07
-#define BTM_COD_MAJOR_TOY 0x08
-#define BTM_COD_MAJOR_HEALTH 0x09
-#define BTM_COD_MAJOR_UNCLASSIFIED 0x1F
-
-/***************************
-** service class fields
-****************************/
-#define BTM_COD_SERVICE_LMTD_DISCOVER 0x0020
-#define BTM_COD_SERVICE_POSITIONING 0x0100
-#define BTM_COD_SERVICE_NETWORKING 0x0200
-#define BTM_COD_SERVICE_RENDERING 0x0400
-#define BTM_COD_SERVICE_CAPTURING 0x0800
-#define BTM_COD_SERVICE_OBJ_TRANSFER 0x1000
-#define BTM_COD_SERVICE_AUDIO 0x2000
-#define BTM_COD_SERVICE_TELEPHONY 0x4000
-#define BTM_COD_SERVICE_INFORMATION 0x8000
-
-/* class of device field macros */
-#define BTM_COD_FORMAT_TYPE(u8, pd) {u8 = pd[2]&0x03;}
-#define BTM_COD_MINOR_CLASS(u8, pd) {u8 = pd[2]&0xFC;}
-#define BTM_COD_MAJOR_CLASS(u8, pd) {u8 = pd[1]&0x1F;}
-#define BTM_COD_SERVICE_CLASS(u16, pd) {u16 = pd[0]; u16<<=8; u16 += pd[1]&0xE0;}
-
-/* to set the fields (assumes that format type is always 0) */
-#define FIELDS_TO_COD(pd, mn, mj, sv) {pd[2] = mn; pd[1] = \
- mj+ ((sv)&BTM_COD_SERVICE_CLASS_LO_B); \
- pd[0] = (sv) >> 8;}
-
-/* the COD masks */
-#define BTM_COD_FORMAT_TYPE_MASK 0x03
-#define BTM_COD_MINOR_CLASS_MASK 0xFC
-#define BTM_COD_MAJOR_CLASS_MASK 0x1F
-#define BTM_COD_SERVICE_CLASS_LO_B 0x00E0
-#define BTM_COD_SERVICE_CLASS_MASK 0xFFE0
-
-
-/* BTM service definitions
-** Used for storing EIR data to bit mask
-*/
-enum
-{
- BTM_EIR_UUID_SERVCLASS_SERVICE_DISCOVERY_SERVER,
-/* BTM_EIR_UUID_SERVCLASS_BROWSE_GROUP_DESCRIPTOR, */
-/* BTM_EIR_UUID_SERVCLASS_PUBLIC_BROWSE_GROUP, */
- BTM_EIR_UUID_SERVCLASS_SERIAL_PORT,
- BTM_EIR_UUID_SERVCLASS_LAN_ACCESS_USING_PPP,
- BTM_EIR_UUID_SERVCLASS_DIALUP_NETWORKING,
- BTM_EIR_UUID_SERVCLASS_IRMC_SYNC,
- BTM_EIR_UUID_SERVCLASS_OBEX_OBJECT_PUSH,
- BTM_EIR_UUID_SERVCLASS_OBEX_FILE_TRANSFER,
- BTM_EIR_UUID_SERVCLASS_IRMC_SYNC_COMMAND,
- BTM_EIR_UUID_SERVCLASS_HEADSET,
- BTM_EIR_UUID_SERVCLASS_CORDLESS_TELEPHONY,
- BTM_EIR_UUID_SERVCLASS_AUDIO_SOURCE,
- BTM_EIR_UUID_SERVCLASS_AUDIO_SINK,
- BTM_EIR_UUID_SERVCLASS_AV_REM_CTRL_TARGET,
-/* BTM_EIR_UUID_SERVCLASS_ADV_AUDIO_DISTRIBUTION, */
- BTM_EIR_UUID_SERVCLASS_AV_REMOTE_CONTROL,
-/* BTM_EIR_UUID_SERVCLASS_VIDEO_CONFERENCING, */
- BTM_EIR_UUID_SERVCLASS_INTERCOM,
- BTM_EIR_UUID_SERVCLASS_FAX,
- BTM_EIR_UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY,
-/* BTM_EIR_UUID_SERVCLASS_WAP, */
-/* BTM_EIR_UUID_SERVCLASS_WAP_CLIENT, */
- BTM_EIR_UUID_SERVCLASS_PANU,
- BTM_EIR_UUID_SERVCLASS_NAP,
- BTM_EIR_UUID_SERVCLASS_GN,
- BTM_EIR_UUID_SERVCLASS_DIRECT_PRINTING,
-/* BTM_EIR_UUID_SERVCLASS_REFERENCE_PRINTING, */
- BTM_EIR_UUID_SERVCLASS_IMAGING,
- BTM_EIR_UUID_SERVCLASS_IMAGING_RESPONDER,
- BTM_EIR_UUID_SERVCLASS_IMAGING_AUTO_ARCHIVE,
- BTM_EIR_UUID_SERVCLASS_IMAGING_REF_OBJECTS,
- BTM_EIR_UUID_SERVCLASS_HF_HANDSFREE,
- BTM_EIR_UUID_SERVCLASS_AG_HANDSFREE,
- BTM_EIR_UUID_SERVCLASS_DIR_PRT_REF_OBJ_SERVICE,
-/* BTM_EIR_UUID_SERVCLASS_REFLECTED_UI, */
- BTM_EIR_UUID_SERVCLASS_BASIC_PRINTING,
- BTM_EIR_UUID_SERVCLASS_PRINTING_STATUS,
- BTM_EIR_UUID_SERVCLASS_HUMAN_INTERFACE,
- BTM_EIR_UUID_SERVCLASS_CABLE_REPLACEMENT,
- BTM_EIR_UUID_SERVCLASS_HCRP_PRINT,
- BTM_EIR_UUID_SERVCLASS_HCRP_SCAN,
-/* BTM_EIR_UUID_SERVCLASS_COMMON_ISDN_ACCESS, */
-/* BTM_EIR_UUID_SERVCLASS_VIDEO_CONFERENCING_GW, */
-/* BTM_EIR_UUID_SERVCLASS_UDI_MT, */
-/* BTM_EIR_UUID_SERVCLASS_UDI_TA, */
-/* BTM_EIR_UUID_SERVCLASS_VCP, */
- BTM_EIR_UUID_SERVCLASS_SAP,
- BTM_EIR_UUID_SERVCLASS_PBAP_PCE,
- BTM_EIR_UUID_SERVCLASS_PBAP_PSE,
-/* BTM_EIR_UUID_SERVCLASS_TE_PHONE_ACCESS, */
-/* BTM_EIR_UUID_SERVCLASS_ME_PHONE_ACCESS, */
- BTM_EIR_UUID_SERVCLASS_PHONE_ACCESS,
- BTM_EIR_UUID_SERVCLASS_HEADSET_HS,
- BTM_EIR_UUID_SERVCLASS_PNP_INFORMATION,
-/* BTM_EIR_UUID_SERVCLASS_GENERIC_NETWORKING, */
-/* BTM_EIR_UUID_SERVCLASS_GENERIC_FILETRANSFER, */
-/* BTM_EIR_UUID_SERVCLASS_GENERIC_AUDIO, */
-/* BTM_EIR_UUID_SERVCLASS_GENERIC_TELEPHONY, */
-/* BTM_EIR_UUID_SERVCLASS_UPNP_SERVICE, */
-/* BTM_EIR_UUID_SERVCLASS_UPNP_IP_SERVICE, */
-/* BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_PAN, */
-/* BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_LAP, */
-/* BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_L2CAP, */
- BTM_EIR_UUID_SERVCLASS_VIDEO_SOURCE,
- BTM_EIR_UUID_SERVCLASS_VIDEO_SINK,
-/* BTM_EIR_UUID_SERVCLASS_VIDEO_DISTRIBUTION */
-/* BTM_EIR_UUID_SERVCLASS_HDP_PROFILE */
- BTM_EIR_UUID_SERVCLASS_MESSAGE_ACCESS,
- BTM_EIR_UUID_SERVCLASS_MESSAGE_NOTIFICATION,
- BTM_EIR_UUID_SERVCLASS_HDP_SOURCE,
- BTM_EIR_UUID_SERVCLASS_HDP_SINK,
- BTM_EIR_MAX_SERVICES
-};
-
-/* search result in EIR of inquiry database */
-#define BTM_EIR_FOUND 0
-#define BTM_EIR_NOT_FOUND 1
-#define BTM_EIR_UNKNOWN 2
-
-typedef UINT8 tBTM_EIR_SEARCH_RESULT;
-
-#define BTM_EIR_FLAGS_TYPE HCI_EIR_FLAGS_TYPE /* 0x01 */
-#define BTM_EIR_MORE_16BITS_UUID_TYPE HCI_EIR_MORE_16BITS_UUID_TYPE /* 0x02 */
-#define BTM_EIR_COMPLETE_16BITS_UUID_TYPE HCI_EIR_COMPLETE_16BITS_UUID_TYPE /* 0x03 */
-#define BTM_EIR_MORE_32BITS_UUID_TYPE HCI_EIR_MORE_32BITS_UUID_TYPE /* 0x04 */
-#define BTM_EIR_COMPLETE_32BITS_UUID_TYPE HCI_EIR_COMPLETE_32BITS_UUID_TYPE /* 0x05 */
-#define BTM_EIR_MORE_128BITS_UUID_TYPE HCI_EIR_MORE_128BITS_UUID_TYPE /* 0x06 */
-#define BTM_EIR_COMPLETE_128BITS_UUID_TYPE HCI_EIR_COMPLETE_128BITS_UUID_TYPE /* 0x07 */
-#define BTM_EIR_SHORTENED_LOCAL_NAME_TYPE HCI_EIR_SHORTENED_LOCAL_NAME_TYPE /* 0x08 */
-#define BTM_EIR_COMPLETE_LOCAL_NAME_TYPE HCI_EIR_COMPLETE_LOCAL_NAME_TYPE /* 0x09 */
-#define BTM_EIR_TX_POWER_LEVEL_TYPE HCI_EIR_TX_POWER_LEVEL_TYPE /* 0x0A */
-#define BTM_EIR_MANUFACTURER_SPECIFIC_TYPE HCI_EIR_MANUFACTURER_SPECIFIC_TYPE /* 0xFF */
-
-/* the following EIR tags are defined to OOB, not regular EIR data */
-#define BTM_EIR_OOB_BD_ADDR_TYPE HCI_EIR_OOB_BD_ADDR_TYPE /* 6 bytes */
-#define BTM_EIR_OOB_COD_TYPE HCI_EIR_OOB_COD_TYPE /* 3 bytes */
-#define BTM_EIR_OOB_SSP_HASH_C_TYPE HCI_EIR_OOB_SSP_HASH_C_TYPE /* 16 bytes */
-#define BTM_EIR_OOB_SSP_RAND_R_TYPE HCI_EIR_OOB_SSP_RAND_R_TYPE /* 16 bytes */
-
-#define BTM_OOB_MANDATORY_SIZE 8 /* include 2 bytes length & 6 bytes bd_addr */
-#define BTM_OOB_DATA_LEN_SIZE 2
-#define BTM_OOB_BD_ADDR_SIZE 6
-#define BTM_OOB_COD_SIZE BT_OOB_COD_SIZE
-#define BTM_OOB_HASH_C_SIZE BT_OOB_HASH_C_SIZE
-#define BTM_OOB_RAND_R_SIZE BT_OOB_RAND_R_SIZE
-
-#define BTM_BLE_SEC_NONE 0
-#define BTM_BLE_SEC_ENCRYPT 1 /* encrypt the link using current key */
-#define BTM_BLE_SEC_ENCRYPT_NO_MITM 2
-#define BTM_BLE_SEC_ENCRYPT_MITM 3
-typedef UINT8 tBTM_BLE_SEC_ACT;
-
-/************************************************************************************************
-** BTM Services MACROS handle array of UINT32 bits for more than 32 services
-*************************************************************************************************/
-/* Determine the number of UINT32's necessary for services */
-#define BTM_EIR_ARRAY_BITS 32 /* Number of bits in each array element */
-#define BTM_EIR_SERVICE_ARRAY_SIZE (((UINT32)BTM_EIR_MAX_SERVICES / BTM_EIR_ARRAY_BITS) + \
- (((UINT32)BTM_EIR_MAX_SERVICES % BTM_EIR_ARRAY_BITS) ? 1 : 0))
-
-/* MACRO to set the service bit mask in a bit stream */
-#define BTM_EIR_SET_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] |= \
- ((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS)))
-
-
-/* MACRO to clear the service bit mask in a bit stream */
-#define BTM_EIR_CLR_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] &= \
- ~((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS)))
-
-/* MACRO to check the service bit mask in a bit stream */
-#define BTM_EIR_HAS_SERVICE(p, service) ((((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] & \
- ((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS))) >> (((UINT32)(service)) % BTM_EIR_ARRAY_BITS))
-
-/* start of EIR in HCI buffer, 4 bytes = HCI Command(2) + Length(1) + FEC_Req(1) */
-#define BTM_HCI_EIR_OFFSET (BT_HDR_SIZE + 4)
-
-/***************************
-** Device Discovery Types
-****************************/
-/* Definitions of the parameters passed to BTM_StartInquiry and
-** BTM_SetPeriodicInquiryMode.
-*/
-typedef struct /* contains the two device class condition fields */
-{
- DEV_CLASS dev_class;
- DEV_CLASS dev_class_mask;
-} tBTM_COD_COND;
-
-
-typedef union /* contains the inquiry filter condition */
-{
- BD_ADDR bdaddr_cond;
- tBTM_COD_COND cod_cond;
-} tBTM_INQ_FILT_COND;
-
-
-typedef struct /* contains the parameters passed to the inquiry functions */
-{
- UINT8 mode; /* general or limited */
- UINT8 duration; /* duration of the inquiry (1.28 sec increments) */
- UINT8 max_resps; /* maximum number of responses to return */
- BOOLEAN report_dup; /* report duplicated inquiry response with higher RSSI value */
- UINT8 filter_cond_type; /* new devices, BD ADDR, COD, or No filtering */
- tBTM_INQ_FILT_COND filter_cond; /* filter value based on filter cond type */
-#if (defined(BTA_HOST_INTERLEAVE_SEARCH) && BTA_HOST_INTERLEAVE_SEARCH == TRUE)
- UINT8 intl_duration[4]; /*duration array storing the interleave scan's time portions*/
-#endif
-} tBTM_INQ_PARMS;
-
-#define BTM_INQ_RESULT_BR 0x01
-#define BTM_INQ_RESULT_BLE 0x02
-
-#if (BLE_INCLUDED == TRUE)
-#define BTM_BLE_EVT_CONN_ADV 0x00
-#define BTM_BLE_EVT_CONN_DIR_ADV 0x01
-#define BTM_BLE_EVT_DISC_ADV 0x02
-#define BTM_BLE_EVT_NON_CONN_ADV 0x03
-#define BTM_BLE_EVT_SCAN_RSP 0x04
-typedef UINT8 tBTM_BLE_EVT_TYPE;
-#endif
-
-/* These are the fields returned in each device's response to the inquiry. It
-** is returned in the results callback if registered.
-*/
-typedef struct
-{
- UINT16 clock_offset;
- BD_ADDR remote_bd_addr;
- DEV_CLASS dev_class;
- UINT8 page_scan_rep_mode;
- UINT8 page_scan_per_mode;
- UINT8 page_scan_mode;
- INT8 rssi; /* Set to BTM_INQ_RES_IGNORE_RSSI if not valid */
- UINT32 eir_uuid[BTM_EIR_SERVICE_ARRAY_SIZE];
- BOOLEAN eir_complete_list;
-#if (BLE_INCLUDED == TRUE)
- tBT_DEVICE_TYPE device_type;
- UINT8 inq_result_type;
- UINT8 ble_addr_type;
- tBTM_BLE_EVT_TYPE ble_evt_type;
- UINT8 flag;
-#endif
-} tBTM_INQ_RESULTS;
-
-
-/* This is the inquiry response information held in its database by BTM, and available
-** to applications via BTM_InqDbRead, BTM_InqDbFirst, and BTM_InqDbNext.
-*/
-typedef struct
-{
- tBTM_INQ_RESULTS results;
-
- BOOLEAN appl_knows_rem_name; /* set by application if it knows the remote name of the peer device.
- This is later used by application to determine if remote name request is
- required to be done. Having the flag here avoid duplicate store of inquiry results */
-#if ( BLE_INCLUDED == TRUE)
- UINT16 remote_name_len;
- tBTM_BD_NAME remote_name;
- UINT8 remote_name_state;
- UINT8 remote_name_type;
-#endif
-
-} tBTM_INQ_INFO;
-
-
-/* Structure returned with inquiry complete callback */
-typedef struct
-{
- tBTM_STATUS status;
- UINT8 num_resp; /* Number of results from the current inquiry */
-} tBTM_INQUIRY_CMPL;
-
-
-/* Structure returned with remote name request */
-typedef struct
-{
- UINT16 status;
- BD_ADDR bd_addr;
- UINT16 length;
- BD_NAME remote_bd_name;
-} tBTM_REMOTE_DEV_NAME;
-
-typedef struct
-{
- UINT8 pcm_intf_rate; /* PCM interface rate: 0: 128kbps, 1: 256 kbps;
- 2:512 bps; 3: 1024kbps; 4: 2048kbps */
- UINT8 frame_type; /* frame type: 0: short; 1: long */
- UINT8 sync_mode; /* sync mode: 0: slave; 1: master */
- UINT8 clock_mode; /* clock mode: 0: slave; 1: master */
-
-}tBTM_SCO_PCM_PARAM;
-
-/****************************************
-** Device Discovery Callback Functions
-*****************************************/
-/* Callback function for asynchronous notifications when the BTM inquiry DB
-** changes. First param is inquiry database, second is if added to or removed
-** from the inquiry database.
-*/
-typedef void (tBTM_INQ_DB_CHANGE_CB) (void *p1, BOOLEAN is_new);
-
-/* Callback function for notifications when the BTM gets inquiry response.
-** First param is inquiry results database, second is pointer of EIR.
-*/
-typedef void (tBTM_INQ_RESULTS_CB) (tBTM_INQ_RESULTS *p_inq_results, UINT8 *p_eir);
-
-/*****************************************************************************
-** ACL CHANNEL MANAGEMENT
-*****************************************************************************/
-/******************
-** ACL Constants
-*******************/
-
-/* ACL modes */
-#define BTM_ACL_MODE_NORMAL HCI_MODE_ACTIVE
-#define BTM_ACL_MODE_HOLD HCI_MODE_HOLD
-#define BTM_ACL_MODE_SNIFF HCI_MODE_SNIFF
-#define BTM_ACL_MODE_PARK HCI_MODE_PARK
-
-/* Returned with structure in role switch callback (tBTM_ROLE_SWITCH_CMPL) */
-#define BTM_ROLE_MASTER HCI_ROLE_MASTER
-#define BTM_ROLE_SLAVE HCI_ROLE_SLAVE
-#define BTM_ROLE_UNDEFINED 0xff /* undefined value (error status) */
-
-/* ACL Packet Types */
-#define BTM_ACL_PKT_TYPES_MASK_DM1 HCI_PKT_TYPES_MASK_DM1
-#define BTM_ACL_PKT_TYPES_MASK_DH1 HCI_PKT_TYPES_MASK_DH1
-#define BTM_ACL_PKT_TYPES_MASK_DM3 HCI_PKT_TYPES_MASK_DM3
-#define BTM_ACL_PKT_TYPES_MASK_DH3 HCI_PKT_TYPES_MASK_DH3
-#define BTM_ACL_PKT_TYPES_MASK_DM5 HCI_PKT_TYPES_MASK_DM5
-#define BTM_ACL_PKT_TYPES_MASK_DH5 HCI_PKT_TYPES_MASK_DH5
-#define BTM_ACL_PKT_TYPES_MASK_NO_2_DH1 HCI_PKT_TYPES_MASK_NO_2_DH1
-#define BTM_ACL_PKT_TYPES_MASK_NO_3_DH1 HCI_PKT_TYPES_MASK_NO_3_DH1
-#define BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 HCI_PKT_TYPES_MASK_NO_2_DH3
-#define BTM_ACL_PKT_TYPES_MASK_NO_3_DH3 HCI_PKT_TYPES_MASK_NO_3_DH3
-#define BTM_ACL_PKT_TYPES_MASK_NO_2_DH5 HCI_PKT_TYPES_MASK_NO_2_DH5
-#define BTM_ACL_PKT_TYPES_MASK_NO_3_DH5 HCI_PKT_TYPES_MASK_NO_3_DH5
-
-/***************
-** ACL Types
-****************/
-
-/* Structure returned with Role Switch information (in tBTM_CMPL_CB callback function)
-** in response to BTM_SwitchRole call.
-*/
-typedef struct
-{
- UINT8 hci_status; /* HCI status returned with the event */
- UINT8 role; /* BTM_ROLE_MASTER or BTM_ROLE_SLAVE */
- BD_ADDR remote_bd_addr; /* Remote BD addr involved with the switch */
-} tBTM_ROLE_SWITCH_CMPL;
-
-/* Structure returned with QoS information (in tBTM_CMPL_CB callback function)
-** in response to BTM_SetQoS call.
-*/
-typedef struct
-{
- FLOW_SPEC flow;
- UINT16 handle;
- UINT8 status;
-} tBTM_QOS_SETUP_CMPL;
-
-
-/* Structure returned with read RSSI event (in tBTM_CMPL_CB callback function)
-** in response to BTM_ReadRSSI call.
-*/
-typedef struct
-{
- tBTM_STATUS status;
- UINT8 hci_status;
- INT8 rssi;
- BD_ADDR rem_bda;
-} tBTM_RSSI_RESULTS;
-
-/* Structure returned with read current TX power event (in tBTM_CMPL_CB callback function)
-** in response to BTM_ReadTxPower call.
-*/
-typedef struct
-{
- tBTM_STATUS status;
- UINT8 hci_status;
- INT8 tx_power;
- BD_ADDR rem_bda;
-} tBTM_TX_POWER_RESULTS;
-
-/* Structure returned with read link quality event (in tBTM_CMPL_CB callback function)
-** in response to BTM_ReadLinkQuality call.
-*/
-typedef struct
-{
- tBTM_STATUS status;
- UINT8 hci_status;
- UINT8 link_quality;
- BD_ADDR rem_bda;
-} tBTM_LINK_QUALITY_RESULTS;
-
-/* Structure returned with read inq tx power quality event (in tBTM_CMPL_CB callback function)
-** in response to BTM_ReadInquiryRspTxPower call.
-*/
-typedef struct
-{
- tBTM_STATUS status;
- UINT8 hci_status;
- INT8 tx_power;
-} tBTM_INQ_TXPWR_RESULTS;
-
-enum
-{
- BTM_BL_CONN_EVT,
- BTM_BL_DISCN_EVT,
- BTM_BL_UPDATE_EVT,
- BTM_BL_ROLE_CHG_EVT,
- BTM_BL_COLLISION_EVT
-};
-typedef UINT8 tBTM_BL_EVENT;
-typedef UINT16 tBTM_BL_EVENT_MASK;
-
-#define BTM_BL_CONN_MASK 0x0001
-#define BTM_BL_DISCN_MASK 0x0002
-#define BTM_BL_UPDATE_MASK 0x0004
-#define BTM_BL_ROLE_CHG_MASK 0x0008
-
-/* Device features mask definitions */
-#define BTM_FEATURE_BYTES_PER_PAGE HCI_FEATURE_BYTES_PER_PAGE
-#define BTM_EXT_FEATURES_PAGE_MAX HCI_EXT_FEATURES_PAGE_MAX
-
-/* the data type associated with BTM_BL_CONN_EVT */
-typedef struct
-{
- tBTM_BL_EVENT event; /* The event reported. */
- BD_ADDR_PTR p_bda; /* The address of the newly connected device */
- DEV_CLASS_PTR p_dc; /* The device class */
- BD_NAME_PTR p_bdn; /* The device name */
- UINT8 *p_features; /* pointer to the remote device's features page[0] (supported features page) */
-#if BLE_INCLUDED == TRUE
- UINT16 handle; /* connection handle */
- tBT_TRANSPORT transport; /* link is LE or not */
-#endif
-} tBTM_BL_CONN_DATA;
-
-/* the data type associated with BTM_BL_DISCN_EVT */
-typedef struct
-{
- tBTM_BL_EVENT event; /* The event reported. */
- BD_ADDR_PTR p_bda; /* The address of the disconnected device */
-#if BLE_INCLUDED == TRUE
- UINT16 handle; /* disconnected connection handle */
- tBT_TRANSPORT transport; /* link is LE link or not */
-#endif
-} tBTM_BL_DISCN_DATA;
-
-/* Busy-Level shall have the inquiry_paging mask set when
- * inquiry/paging is in progress, Else the number of ACL links */
-#define BTM_BL_INQUIRY_PAGING_MASK 0x10
-#define BTM_BL_INQUIRY_STARTED (BTM_BL_INQUIRY_PAGING_MASK | 0x1)
-#define BTM_BL_INQUIRY_CANCELLED (BTM_BL_INQUIRY_PAGING_MASK | 0x2)
-#define BTM_BL_INQUIRY_COMPLETE (BTM_BL_INQUIRY_PAGING_MASK | 0x3)
-#define BTM_BL_PAGING_STARTED (BTM_BL_INQUIRY_PAGING_MASK | 0x4)
-#define BTM_BL_PAGING_COMPLETE (BTM_BL_INQUIRY_PAGING_MASK | 0x5)
-/* the data type associated with BTM_BL_UPDATE_EVT */
-typedef struct
-{
- tBTM_BL_EVENT event; /* The event reported. */
- UINT8 busy_level;/* when paging or inquiring, level is 10.
- * Otherwise, the number of ACL links. */
- UINT8 busy_level_flags; /* Notifies actual inquiry/page activities */
-} tBTM_BL_UPDATE_DATA;
-
-/* the data type associated with BTM_BL_ROLE_CHG_EVT */
-typedef struct
-{
- tBTM_BL_EVENT event; /* The event reported. */
- BD_ADDR_PTR p_bda; /* The address of the peer connected device */
- UINT8 new_role;
- UINT8 hci_status; /* HCI status returned with the event */
-} tBTM_BL_ROLE_CHG_DATA;
-
-typedef union
-{
- tBTM_BL_EVENT event; /* The event reported. */
- tBTM_BL_CONN_DATA conn; /* The data associated with BTM_BL_CONN_EVT */
- tBTM_BL_DISCN_DATA discn; /* The data associated with BTM_BL_DISCN_EVT */
- tBTM_BL_UPDATE_DATA update; /* The data associated with BTM_BL_UPDATE_EVT */
- tBTM_BL_ROLE_CHG_DATA role_chg;/*The data associated with BTM_BL_ROLE_CHG_EVT */
-} tBTM_BL_EVENT_DATA;
-
-/* Callback function for notifications when the BTM busy level
-** changes.
-*/
-typedef void (tBTM_BL_CHANGE_CB) (tBTM_BL_EVENT_DATA *p_data);
-
-/***************************
-** ACL Callback Functions
-****************************/
-/* Callback function for notifications when the BTM ACL connection DB
-** changes. First param is BD address, second is if added or removed.
-** Registered through BTM_AclRegisterForChanges call.
-*/
-#if BLE_INCLUDED == TRUE
-typedef void (tBTM_ACL_DB_CHANGE_CB) (BD_ADDR p_bda, DEV_CLASS p_dc,
- BD_NAME p_bdn, UINT8 *features,
- BOOLEAN is_new, UINT16 handle,
- tBT_TRANSPORT transport);
-#else
-typedef void (tBTM_ACL_DB_CHANGE_CB) (BD_ADDR p_bda, DEV_CLASS p_dc,
- BD_NAME p_bdn, UINT8 *features,
- BOOLEAN is_new);
-#endif
-/*****************************************************************************
-** SCO CHANNEL MANAGEMENT
-*****************************************************************************/
-/******************
-** SCO Constants
-*******************/
-
-/* Define an invalid SCO index and an invalid HCI handle */
-#define BTM_INVALID_SCO_INDEX 0xFFFF
-#define BTM_INVALID_HCI_HANDLE 0xFFFF
-
-/* Define an invalid SCO disconnect reason */
-#define BTM_INVALID_SCO_DISC_REASON 0xFFFF
-
-/* Define first active SCO index */
-#define BTM_FIRST_ACTIVE_SCO_INDEX BTM_MAX_SCO_LINKS
-
-/* Define SCO packet types used in APIs */
-#define BTM_SCO_PKT_TYPES_MASK_HV1 HCI_ESCO_PKT_TYPES_MASK_HV1
-#define BTM_SCO_PKT_TYPES_MASK_HV2 HCI_ESCO_PKT_TYPES_MASK_HV2
-#define BTM_SCO_PKT_TYPES_MASK_HV3 HCI_ESCO_PKT_TYPES_MASK_HV3
-#define BTM_SCO_PKT_TYPES_MASK_EV3 HCI_ESCO_PKT_TYPES_MASK_EV3
-#define BTM_SCO_PKT_TYPES_MASK_EV4 HCI_ESCO_PKT_TYPES_MASK_EV4
-#define BTM_SCO_PKT_TYPES_MASK_EV5 HCI_ESCO_PKT_TYPES_MASK_EV5
-#define BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3
-#define BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3
-#define BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5
-#define BTM_SCO_PKT_TYPES_MASK_NO_3_EV5 HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5
-
-#define BTM_SCO_LINK_ONLY_MASK (BTM_SCO_PKT_TYPES_MASK_HV1 | \
- BTM_SCO_PKT_TYPES_MASK_HV2 | \
- BTM_SCO_PKT_TYPES_MASK_HV3)
-
-#define BTM_ESCO_LINK_ONLY_MASK (BTM_SCO_PKT_TYPES_MASK_EV3 | \
- BTM_SCO_PKT_TYPES_MASK_EV4 | \
- BTM_SCO_PKT_TYPES_MASK_EV5)
-
-#define BTM_SCO_LINK_ALL_PKT_MASK (BTM_SCO_LINK_ONLY_MASK | \
- BTM_ESCO_LINK_ONLY_MASK)
-
-#define BTM_VALID_SCO_ALL_PKT_TYPE HCI_VALID_SCO_ALL_PKT_TYPE
-
-/* Passed in BTM_CreateSco if the packet type parameter should be ignored */
-#define BTM_IGNORE_SCO_PKT_TYPE 0
-
-/***************
-** SCO Types
-****************/
-#define BTM_LINK_TYPE_SCO HCI_LINK_TYPE_SCO
-#define BTM_LINK_TYPE_ESCO HCI_LINK_TYPE_ESCO
-typedef UINT8 tBTM_SCO_TYPE;
-
-
-/*******************
-** SCO Routing Path
-********************/
-#define BTM_SCO_ROUTE_PCM HCI_BRCM_SCO_ROUTE_PCM
-#define BTM_SCO_ROUTE_HCI HCI_BRCM_SCO_ROUTE_HCI
-typedef UINT8 tBTM_SCO_ROUTE_TYPE;
-
-
-/*******************
-** SCO Codec Types
-********************/
-// TODO(google) This should use common definitions
-// in hci/include/hci_audio.h
-#define BTM_SCO_CODEC_NONE 0x0000
-#define BTM_SCO_CODEC_CVSD 0x0001
-#define BTM_SCO_CODEC_MSBC 0x0002
-typedef UINT16 tBTM_SCO_CODEC_TYPE;
-
-
-
-/*******************
-** SCO Air Mode Types
-********************/
-#define BTM_SCO_AIR_MODE_U_LAW 0
-#define BTM_SCO_AIR_MODE_A_LAW 1
-#define BTM_SCO_AIR_MODE_CVSD 2
-#define BTM_SCO_AIR_MODE_TRANSPNT 3
-typedef UINT8 tBTM_SCO_AIR_MODE_TYPE;
-
-/*******************
-** SCO Voice Settings
-********************/
-#define BTM_VOICE_SETTING_CVSD ((UINT16) (HCI_INP_CODING_LINEAR | \
- HCI_INP_DATA_FMT_2S_COMPLEMENT | \
- HCI_INP_SAMPLE_SIZE_16BIT | \
- HCI_AIR_CODING_FORMAT_CVSD))
-
-#define BTM_VOICE_SETTING_TRANS ((UINT16) (HCI_INP_CODING_LINEAR | \
- HCI_INP_DATA_FMT_2S_COMPLEMENT | \
- HCI_INP_SAMPLE_SIZE_16BIT | \
- HCI_AIR_CODING_FORMAT_TRANSPNT))
-
-/*******************
-** SCO Data Status
-********************/
-enum
-{
- BTM_SCO_DATA_CORRECT,
- BTM_SCO_DATA_PAR_ERR,
- BTM_SCO_DATA_NONE,
- BTM_SCO_DATA_PAR_LOST
-};
-typedef UINT8 tBTM_SCO_DATA_FLAG;
-
-/***************************
-** SCO Callback Functions
-****************************/
-typedef void (tBTM_SCO_CB) (UINT16 sco_inx);
-typedef void (tBTM_SCO_DATA_CB) (UINT16 sco_inx, BT_HDR *p_data, tBTM_SCO_DATA_FLAG status);
-
-/******************
-** eSCO Constants
-*******************/
-#define BTM_64KBITS_RATE 0x00001f40 /* 64 kbits/sec data rate */
-
-/* Retransmission effort */
-#define BTM_ESCO_RETRANS_OFF 0
-#define BTM_ESCO_RETRANS_POWER 1
-#define BTM_ESCO_RETRANS_QUALITY 2
-#define BTM_ESCO_RETRANS_DONTCARE 0xff
-
-/* Max Latency Don't Care */
-#define BTM_ESCO_MAX_LAT_DONTCARE 0xffff
-
-/***************
-** eSCO Types
-****************/
-/* tBTM_ESCO_CBACK event types */
-#define BTM_ESCO_CHG_EVT 1
-#define BTM_ESCO_CONN_REQ_EVT 2
-typedef UINT8 tBTM_ESCO_EVT;
-
-/* Passed into BTM_SetEScoMode() */
-typedef struct
-{
- UINT32 tx_bw;
- UINT32 rx_bw;
- UINT16 max_latency;
- UINT16 voice_contfmt; /* Voice Settings or Content Format */
- UINT16 packet_types;
- UINT8 retrans_effort;
-} tBTM_ESCO_PARAMS;
-
-typedef struct
-{
- UINT16 max_latency;
- UINT16 packet_types;
- UINT8 retrans_effort;
-} tBTM_CHG_ESCO_PARAMS;
-
-/* Returned by BTM_ReadEScoLinkParms() */
-typedef struct
-{
- UINT16 rx_pkt_len;
- UINT16 tx_pkt_len;
- BD_ADDR bd_addr;
- UINT8 link_type; /* BTM_LINK_TYPE_SCO or BTM_LINK_TYPE_ESCO */
- UINT8 tx_interval;
- UINT8 retrans_window;
- UINT8 air_mode;
-} tBTM_ESCO_DATA;
-
-typedef struct
-{
- UINT16 sco_inx;
- UINT16 rx_pkt_len;
- UINT16 tx_pkt_len;
- BD_ADDR bd_addr;
- UINT8 hci_status;
- UINT8 tx_interval;
- UINT8 retrans_window;
-} tBTM_CHG_ESCO_EVT_DATA;
-
-typedef struct
-{
- UINT16 sco_inx;
- BD_ADDR bd_addr;
- DEV_CLASS dev_class;
- tBTM_SCO_TYPE link_type;
-} tBTM_ESCO_CONN_REQ_EVT_DATA;
-
-typedef union
-{
- tBTM_CHG_ESCO_EVT_DATA chg_evt;
- tBTM_ESCO_CONN_REQ_EVT_DATA conn_evt;
-} tBTM_ESCO_EVT_DATA;
-
-/***************************
-** eSCO Callback Functions
-****************************/
-typedef void (tBTM_ESCO_CBACK) (tBTM_ESCO_EVT event, tBTM_ESCO_EVT_DATA *p_data);
-
-
-/*****************************************************************************
-** SECURITY MANAGEMENT
-*****************************************************************************/
-/*******************************
-** Security Manager Constants
-********************************/
-
-/* Security Mode (BTM_SetSecurityMode) */
-#define BTM_SEC_MODE_UNDEFINED 0
-#define BTM_SEC_MODE_NONE 1
-#define BTM_SEC_MODE_SERVICE 2
-#define BTM_SEC_MODE_LINK 3
-#define BTM_SEC_MODE_SP 4
-#define BTM_SEC_MODE_SP_DEBUG 5
-#define BTM_SEC_MODE_SC 6
-
-/* Maximum Number of BTM Security Modes */
-#define BTM_SEC_MODES_MAX 7
-
-/* Security Service Levels [bit mask] (BTM_SetSecurityLevel)
-** Encryption should not be used without authentication
-*/
-#define BTM_SEC_NONE 0x0000 /* Nothing required */
-#define BTM_SEC_IN_AUTHORIZE 0x0001 /* Inbound call requires authorization */
-#define BTM_SEC_IN_AUTHENTICATE 0x0002 /* Inbound call requires authentication */
-#define BTM_SEC_IN_ENCRYPT 0x0004 /* Inbound call requires encryption */
-#define BTM_SEC_OUT_AUTHORIZE 0x0008 /* Outbound call requires authorization */
-#define BTM_SEC_OUT_AUTHENTICATE 0x0010 /* Outbound call requires authentication */
-#define BTM_SEC_OUT_ENCRYPT 0x0020 /* Outbound call requires encryption */
-#define BTM_SEC_MODE4_LEVEL4 0x0040 /* Secure Connections Only Mode */
-#define BTM_SEC_FORCE_MASTER 0x0100 /* Need to switch connection to be master */
-#define BTM_SEC_ATTEMPT_MASTER 0x0200 /* Try to switch connection to be master */
-#define BTM_SEC_FORCE_SLAVE 0x0400 /* Need to switch connection to be master */
-#define BTM_SEC_ATTEMPT_SLAVE 0x0800 /* Try to switch connection to be slave */
-#define BTM_SEC_IN_MITM 0x1000 /* inbound Do man in the middle protection */
-#define BTM_SEC_OUT_MITM 0x2000 /* outbound Do man in the middle protection */
-#define BTM_SEC_IN_MIN_16_DIGIT_PIN 0x4000 /* enforce a minimum of 16 digit for sec mode 2 */
-
-/* Security Flags [bit mask] (BTM_GetSecurityFlags)
-*/
-#define BTM_SEC_FLAG_AUTHORIZED 0x01
-#define BTM_SEC_FLAG_AUTHENTICATED 0x02
-#define BTM_SEC_FLAG_ENCRYPTED 0x04
-#define BTM_SEC_FLAG_LKEY_KNOWN 0x10
-#define BTM_SEC_FLAG_LKEY_AUTHED 0x20
-
-/* PIN types */
-#define BTM_PIN_TYPE_VARIABLE HCI_PIN_TYPE_VARIABLE
-#define BTM_PIN_TYPE_FIXED HCI_PIN_TYPE_FIXED
-
-/* Link Key types used to generate the new link key.
-** returned in link key notification callback function
-*/
-#define BTM_LKEY_TYPE_COMBINATION HCI_LKEY_TYPE_COMBINATION
-#define BTM_LKEY_TYPE_LOCAL_UNIT HCI_LKEY_TYPE_LOCAL_UNIT
-#define BTM_LKEY_TYPE_REMOTE_UNIT HCI_LKEY_TYPE_REMOTE_UNIT
-#define BTM_LKEY_TYPE_DEBUG_COMB HCI_LKEY_TYPE_DEBUG_COMB
-#define BTM_LKEY_TYPE_UNAUTH_COMB HCI_LKEY_TYPE_UNAUTH_COMB
-#define BTM_LKEY_TYPE_AUTH_COMB HCI_LKEY_TYPE_AUTH_COMB
-#define BTM_LKEY_TYPE_CHANGED_COMB HCI_LKEY_TYPE_CHANGED_COMB
-
-#define BTM_LKEY_TYPE_UNAUTH_COMB_P_256 HCI_LKEY_TYPE_UNAUTH_COMB_P_256
-#define BTM_LKEY_TYPE_AUTH_COMB_P_256 HCI_LKEY_TYPE_AUTH_COMB_P_256
-
-#define BTM_LTK_DERIVED_LKEY_OFFSET 0x20 /* "easy" requirements for LK derived from LTK */
-#define BTM_LKEY_TYPE_IGNORE 0xff /* used when event is response from
- hci return link keys request */
-
-typedef UINT8 tBTM_LINK_KEY_TYPE;
-
-/* Protocol level security (BTM_SetSecurityLevel) */
-#define BTM_SEC_PROTO_L2CAP 0
-#define BTM_SEC_PROTO_SDP 1
-#define BTM_SEC_PROTO_TCS 2
-#define BTM_SEC_PROTO_RFCOMM 3
-#define BTM_SEC_PROTO_OBEX 4
-#define BTM_SEC_PROTO_BNEP 5
-#define BTM_SEC_PROTO_HID 6 /* HID */
-#define BTM_SEC_PROTO_AVDT 7
-#define BTM_SEC_PROTO_MCA 8
-
-/* Determine the number of UINT32's necessary for security services */
-#define BTM_SEC_ARRAY_BITS 32 /* Number of bits in each array element */
-#define BTM_SEC_SERVICE_ARRAY_SIZE (((UINT32)BTM_SEC_MAX_SERVICES / BTM_SEC_ARRAY_BITS) + \
- (((UINT32)BTM_SEC_MAX_SERVICES % BTM_SEC_ARRAY_BITS) ? 1 : 0))
-
-/* Security service definitions (BTM_SetSecurityLevel)
-** Used for Authorization APIs
-*/
-#define BTM_SEC_SERVICE_SDP_SERVER 0
-#define BTM_SEC_SERVICE_SERIAL_PORT 1
-#define BTM_SEC_SERVICE_LAN_ACCESS 2
-#define BTM_SEC_SERVICE_DUN 3
-#define BTM_SEC_SERVICE_IRMC_SYNC 4
-#define BTM_SEC_SERVICE_IRMC_SYNC_CMD 5
-#define BTM_SEC_SERVICE_OBEX 6
-#define BTM_SEC_SERVICE_OBEX_FTP 7
-#define BTM_SEC_SERVICE_HEADSET 8
-#define BTM_SEC_SERVICE_CORDLESS 9
-#define BTM_SEC_SERVICE_INTERCOM 10
-#define BTM_SEC_SERVICE_FAX 11
-#define BTM_SEC_SERVICE_HEADSET_AG 12
-#define BTM_SEC_SERVICE_PNP_INFO 13
-#define BTM_SEC_SERVICE_GEN_NET 14
-#define BTM_SEC_SERVICE_GEN_FILE 15
-#define BTM_SEC_SERVICE_GEN_AUDIO 16
-#define BTM_SEC_SERVICE_GEN_TEL 17
-#define BTM_SEC_SERVICE_CTP_DATA 18
-#define BTM_SEC_SERVICE_HCRP_CTRL 19
-#define BTM_SEC_SERVICE_HCRP_DATA 20
-#define BTM_SEC_SERVICE_HCRP_NOTIF 21
-#define BTM_SEC_SERVICE_BPP_JOB 22
-#define BTM_SEC_SERVICE_BPP_STATUS 23
-#define BTM_SEC_SERVICE_BPP_REF 24
-#define BTM_SEC_SERVICE_BNEP_PANU 25
-#define BTM_SEC_SERVICE_BNEP_GN 26
-#define BTM_SEC_SERVICE_BNEP_NAP 27
-#define BTM_SEC_SERVICE_HF_HANDSFREE 28
-#define BTM_SEC_SERVICE_AG_HANDSFREE 29
-#define BTM_SEC_SERVICE_TE_PHONE_ACCESS 30
-#define BTM_SEC_SERVICE_ME_PHONE_ACCESS 31
-
-#define BTM_SEC_SERVICE_HIDH_SEC_CTRL 32
-#define BTM_SEC_SERVICE_HIDH_NOSEC_CTRL 33
-#define BTM_SEC_SERVICE_HIDH_INTR 34
-#define BTM_SEC_SERVICE_BIP 35
-#define BTM_SEC_SERVICE_BIP_REF 36
-#define BTM_SEC_SERVICE_AVDTP 37
-#define BTM_SEC_SERVICE_AVDTP_NOSEC 38
-#define BTM_SEC_SERVICE_AVCTP 39
-#define BTM_SEC_SERVICE_SAP 40
-#define BTM_SEC_SERVICE_PBAP 41
-#define BTM_SEC_SERVICE_RFC_MUX 42
-#define BTM_SEC_SERVICE_AVCTP_BROWSE 43
-#define BTM_SEC_SERVICE_MAP 44
-#define BTM_SEC_SERVICE_MAP_NOTIF 45
-#define BTM_SEC_SERVICE_MCAP_CTRL 46
-#define BTM_SEC_SERVICE_MCAP_DATA 47
-#define BTM_SEC_SERVICE_HDP_SNK 48
-#define BTM_SEC_SERVICE_HDP_SRC 49
-#define BTM_SEC_SERVICE_ATT 50
-
-/* Update these as services are added */
-#define BTM_SEC_SERVICE_FIRST_EMPTY 51
-
-#ifndef BTM_SEC_MAX_SERVICES
-#define BTM_SEC_MAX_SERVICES 75
-#endif
-
-/************************************************************************************************
-** Security Services MACROS handle array of UINT32 bits for more than 32 trusted services
-*************************************************************************************************/
-/* MACRO to set the security service bit mask in a bit stream */
-#define BTM_SEC_SET_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)] |= \
- ((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS)))
-
-
-/* MACRO to clear the security service bit mask in a bit stream */
-#define BTM_SEC_CLR_SERVICE(p, service) (((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)] &= \
- ~((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS)))
-
-/* MACRO to check the security service bit mask in a bit stream (Returns TRUE or FALSE) */
-#define BTM_SEC_IS_SERVICE_TRUSTED(p, service) (((((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)]) & \
- (UINT32)(((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS)))) ? TRUE : FALSE)
-
-/* MACRO to copy two trusted device bitmask */
-#define BTM_SEC_COPY_TRUSTED_DEVICE(p_src, p_dst) {UINT32 trst; for (trst = 0; trst < BTM_SEC_SERVICE_ARRAY_SIZE; trst++) \
- ((UINT32 *)(p_dst))[trst] = ((UINT32 *)(p_src))[trst];}
-
-/* MACRO to clear two trusted device bitmask */
-#define BTM_SEC_CLR_TRUSTED_DEVICE(p_dst) {UINT32 trst; for (trst = 0; trst < BTM_SEC_SERVICE_ARRAY_SIZE; trst++) \
- ((UINT32 *)(p_dst))[trst] = 0;}
-
-/* Following bits can be provided by host in the trusted_mask array */
-/* 0..31 bits of mask[0] (Least Significant Word) */
-#define BTM_SEC_TRUST_SDP_SERVER (1 << BTM_SEC_SERVICE_SDP_SERVER)
-#define BTM_SEC_TRUST_SERIAL_PORT (1 << BTM_SEC_SERVICE_SERIAL_PORT)
-#define BTM_SEC_TRUST_LAN_ACCESS (1 << BTM_SEC_SERVICE_LAN_ACCESS)
-#define BTM_SEC_TRUST_DUN (1 << BTM_SEC_SERVICE_DUN)
-#define BTM_SEC_TRUST_IRMC_SYNC (1 << BTM_SEC_SERVICE_IRMC_SYNC)
-#define BTM_SEC_TRUST_IRMC_SYNC_CMD (1 << BTM_SEC_SERVICE_IRMC_SYNC_CMD)
-#define BTM_SEC_TRUST_OBEX (1 << BTM_SEC_SERVICE_OBEX)
-#define BTM_SEC_TRUST_OBEX_FTP (1 << BTM_SEC_SERVICE_OBEX_FTP)
-#define BTM_SEC_TRUST_HEADSET (1 << BTM_SEC_SERVICE_HEADSET)
-#define BTM_SEC_TRUST_CORDLESS (1 << BTM_SEC_SERVICE_CORDLESS)
-#define BTM_SEC_TRUST_INTERCOM (1 << BTM_SEC_SERVICE_INTERCOM)
-#define BTM_SEC_TRUST_FAX (1 << BTM_SEC_SERVICE_FAX)
-#define BTM_SEC_TRUST_HEADSET_AG (1 << BTM_SEC_SERVICE_HEADSET_AG)
-#define BTM_SEC_TRUST_PNP_INFO (1 << BTM_SEC_SERVICE_PNP_INFO)
-#define BTM_SEC_TRUST_GEN_NET (1 << BTM_SEC_SERVICE_GEN_NET)
-#define BTM_SEC_TRUST_GEN_FILE (1 << BTM_SEC_SERVICE_GEN_FILE)
-#define BTM_SEC_TRUST_GEN_AUDIO (1 << BTM_SEC_SERVICE_GEN_AUDIO)
-#define BTM_SEC_TRUST_GEN_TEL (1 << BTM_SEC_SERVICE_GEN_TEL)
-#define BTM_SEC_TRUST_CTP_DATA (1 << BTM_SEC_SERVICE_CTP_DATA)
-#define BTM_SEC_TRUST_HCRP_CTRL (1 << BTM_SEC_SERVICE_HCRP_CTRL)
-#define BTM_SEC_TRUST_HCRP_DATA (1 << BTM_SEC_SERVICE_HCRP_DATA)
-#define BTM_SEC_TRUST_HCRP_NOTIF (1 << BTM_SEC_SERVICE_HCRP_NOTIF)
-#define BTM_SEC_TRUST_BPP_JOB (1 << BTM_SEC_SERVICE_JOB)
-#define BTM_SEC_TRUST_BPP_STATUS (1 << BTM_SEC_SERVICE_STATUS)
-#define BTM_SEC_TRUST_BPP_REF (1 << BTM_SEC_SERVICE_REF)
-#define BTM_SEC_TRUST_BNEP_PANU (1 << BTM_SEC_SERVICE_BNEP_PANU)
-#define BTM_SEC_TRUST_BNEP_GN (1 << BTM_SEC_SERVICE_BNEP_GN)
-#define BTM_SEC_TRUST_BNEP_NAP (1 << BTM_SEC_SERVICE_BNEP_NAP)
-#define BTM_SEC_TRUST_HFP_HF (1 << BTM_SEC_SERVICE_HF_HANDSFREE)
-#define BTM_SEC_TRUST_HFP_AG (1 << BTM_SEC_SERVICE_AG_HANDSFREE)
-#define BTM_SEC_TRUST_TE_PHONE_ACCESS (1 << BTM_SEC_SERVICE_TE_PHONE_ACCESS)
-#define BTM_SEC_TRUST_ME_PHONE_ACCESS (1 << BTM_SEC_SERVICE_ME_PHONE_ACCESS)
-
-/* 0..31 bits of mask[1] (Most Significant Word) */
-#define BTM_SEC_TRUST_HIDH_CTRL (1 << (BTM_SEC_SERVICE_HIDH_SEC_CTRL - 32))
-#define BTM_SEC_TRUST_HIDH_NOSEC_CTRL (1 << (BTM_SEC_SERVICE_HIDH_NOSEC_CTRL - 32))
-#define BTM_SEC_TRUST_HIDH_INTR (1 << (BTM_SEC_SERVICE_HIDH_INTR - 32))
-#define BTM_SEC_TRUST_BIP (1 << (BTM_SEC_SERVICE_BIP - 32))
-#define BTM_SEC_TRUST_BIP_REF (1 << (BTM_SEC_SERVICE_BIP_REF - 32))
-#define BTM_SEC_TRUST_AVDTP (1 << (BTM_SEC_SERVICE_AVDTP - 32))
-#define BTM_SEC_TRUST_AVDTP_NOSEC (1 << (BTM_SEC_SERVICE_AVDTP_NOSEC - 32))
-#define BTM_SEC_TRUST_AVCTP (1 << (BTM_SEC_SERVICE_AVCTP - 32))
-#define BTM_SEC_TRUST_SAP (1 << (BTM_SEC_SERVICE_SAP - 32))
-#define BTM_SEC_TRUST_PBAP (1 << (BTM_SEC_SERVICE_PBAP - 32))
-#define BTM_SEC_TRUST_RFC_MUX (1 << (BTM_SEC_SERVICE_RFC_MUX - 32))
-#define BTM_SEC_TRUST_AVCTP_BROWSE (1 << (BTM_SEC_SERVICE_AVCTP_BROWSE - 32))
-#define BTM_SEC_TRUST_MAP (1 << (BTM_SEC_SERVICE_MAP - 32))
-#define BTM_SEC_TRUST_MAP_NOTIF (1 << (BTM_SEC_SERVICE_MAP_NOTIF - 32))
-#define BTM_SEC_TRUST_MCAP_CTRL (1 << (BTM_SEC_SERVICE_MCAP_CTRL - 32))
-#define BTM_SEC_TRUST_MCAP_DATA (1 << (BTM_SEC_SERVICE_MCAP_DATA - 32))
-#define BTM_SEC_TRUST_HDP_SNK (1 << (BTM_SEC_SERVICE_HDP_SNK - 32))
-#define BTM_SEC_TRUST_HDP_SRC (1 << (BTM_SEC_SERVICE_HDP_SRC - 32))
-
-#define BTM_SEC_TRUST_ALL 0xFFFFFFFF /* for each array element */
-
-/****************************************
-** Security Manager Callback Functions
-*****************************************/
-/* Authorize device for service. Parameters are
-** BD Address of remote
-** Device Class of remote
-** BD Name of remote
-** Service name
-** Service Id (NULL - unknown service or unused
-** [BTM_SEC_SERVICE_NAME_LEN set to 0])
-** Is originator of the connection
-** Result of the operation
-*/
-typedef UINT8 (tBTM_AUTHORIZE_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class,
- tBTM_BD_NAME bd_name, UINT8 *service_name,
- UINT8 service_id, BOOLEAN is_originator);
-
-/* Get PIN for the connection. Parameters are
-** BD Address of remote
-** Device Class of remote
-** BD Name of remote
-** Flag indicating the minimum pin code length to be 16 digits
-*/
-typedef UINT8 (tBTM_PIN_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class,
- tBTM_BD_NAME bd_name, BOOLEAN min_16_digit);
-
-/* New Link Key for the connection. Parameters are
-** BD Address of remote
-** Link Key
-** Key Type: Combination, Local Unit, or Remote Unit
-*/
-typedef UINT8 (tBTM_LINK_KEY_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class,
- tBTM_BD_NAME bd_name, UINT8 *key,
- UINT8 key_type);
-
-
-/* Remote Name Resolved. Parameters are
-** BD Address of remote
-** BD Name of remote
-*/
-typedef void (tBTM_RMT_NAME_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dc,
- tBTM_BD_NAME bd_name);
-
-
-/* Authentication complete for the connection. Parameters are
-** BD Address of remote
-** Device Class of remote
-** BD Name of remote
-**
-*/
-typedef UINT8 (tBTM_AUTH_COMPLETE_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class,
- tBTM_BD_NAME bd_name, int result);
-
-enum
-{
- BTM_SP_IO_REQ_EVT, /* received IO_CAPABILITY_REQUEST event */
- BTM_SP_IO_RSP_EVT, /* received IO_CAPABILITY_RESPONSE event */
- BTM_SP_CFM_REQ_EVT, /* received USER_CONFIRMATION_REQUEST event */
- BTM_SP_KEY_NOTIF_EVT, /* received USER_PASSKEY_NOTIFY event */
- BTM_SP_KEY_REQ_EVT, /* received USER_PASSKEY_REQUEST event */
- BTM_SP_KEYPRESS_EVT, /* received KEYPRESS_NOTIFY event */
- BTM_SP_LOC_OOB_EVT, /* received result for READ_LOCAL_OOB_DATA command */
- BTM_SP_RMT_OOB_EVT, /* received REMOTE_OOB_DATA_REQUEST event */
- BTM_SP_COMPLT_EVT, /* received SIMPLE_PAIRING_COMPLETE event */
- BTM_SP_UPGRADE_EVT /* check if the application wants to upgrade the link key */
-};
-typedef UINT8 tBTM_SP_EVT;
-
-#define BTM_IO_CAP_OUT 0 /* DisplayOnly */
-#define BTM_IO_CAP_IO 1 /* DisplayYesNo */
-#define BTM_IO_CAP_IN 2 /* KeyboardOnly */
-#define BTM_IO_CAP_NONE 3 /* NoInputNoOutput */
-#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
-#define BTM_IO_CAP_KBDISP 4 /* Keyboard display */
-#define BTM_IO_CAP_MAX 5
-#else
-#define BTM_IO_CAP_MAX 4
-#endif
-
-typedef UINT8 tBTM_IO_CAP;
-
-#define BTM_MAX_PASSKEY_VAL (999999)
-#define BTM_MIN_PASSKEY_VAL (0)
-
-#define BTM_AUTH_SP_NO 0 /* MITM Protection Not Required - Single Profile/non-bonding
- Numeric comparison with automatic accept allowed */
-#define BTM_AUTH_SP_YES 1 /* MITM Protection Required - Single Profile/non-bonding
- Use IO Capabilities to determine authentication procedure */
-#define BTM_AUTH_AP_NO 2 /* MITM Protection Not Required - All Profiles/dedicated bonding
- Numeric comparison with automatic accept allowed */
-#define BTM_AUTH_AP_YES 3 /* MITM Protection Required - All Profiles/dedicated bonding
- Use IO Capabilities to determine authentication procedure */
-#define BTM_AUTH_SPGB_NO 4 /* MITM Protection Not Required - Single Profiles/general bonding
- Numeric comparison with automatic accept allowed */
-#define BTM_AUTH_SPGB_YES 5 /* MITM Protection Required - Single Profiles/general bonding
- Use IO Capabilities to determine authentication procedure */
-#define BTM_AUTH_DD_BOND 2 /* this bit is ORed to the BTM_AUTH_SP_* when IO exchange for dedicated bonding */
-#define BTM_AUTH_GB_BIT 4 /* the genernal bonding bit */
-#define BTM_AUTH_BONDS 6 /* the general/dedicated bonding bits */
-#define BTM_AUTH_YN_BIT 1 /* this is the Yes or No bit */
-
-#define BTM_BLE_INITIATOR_KEY_SIZE 15
-#define BTM_BLE_RESPONDER_KEY_SIZE 15
-#define BTM_BLE_MAX_KEY_SIZE 16
-
-typedef UINT8 tBTM_AUTH_REQ;
-
-enum
-{
- BTM_OOB_NONE,
- BTM_OOB_PRESENT,
- BTM_OOB_UNKNOWN
-};
-typedef UINT8 tBTM_OOB_DATA;
-
-/* data type for BTM_SP_IO_REQ_EVT */
-typedef struct
-{
- BD_ADDR bd_addr; /* peer address */
- tBTM_IO_CAP io_cap; /* local IO capabilities */
- tBTM_OOB_DATA oob_data; /* OOB data present (locally) for the peer device */
- tBTM_AUTH_REQ auth_req; /* Authentication required (for local device) */
- BOOLEAN is_orig; /* TRUE, if local device initiated the SP process */
-} tBTM_SP_IO_REQ;
-
-/* data type for BTM_SP_IO_RSP_EVT */
-typedef struct
-{
- BD_ADDR bd_addr; /* peer address */
- tBTM_IO_CAP io_cap; /* peer IO capabilities */
- tBTM_OOB_DATA oob_data; /* OOB data present at peer device for the local device */
- tBTM_AUTH_REQ auth_req; /* Authentication required for peer device */
-} tBTM_SP_IO_RSP;
-
-/* data type for BTM_SP_CFM_REQ_EVT */
-typedef struct
-{
- BD_ADDR bd_addr; /* peer address */
- DEV_CLASS dev_class; /* peer CoD */
- tBTM_BD_NAME bd_name; /* peer device name */
- UINT32 num_val; /* the numeric value for comparison. If just_works, do not show this number to UI */
- BOOLEAN just_works; /* TRUE, if "Just Works" association model */
- tBTM_AUTH_REQ loc_auth_req; /* Authentication required for local device */
- tBTM_AUTH_REQ rmt_auth_req; /* Authentication required for peer device */
- tBTM_IO_CAP loc_io_caps; /* IO Capabilities of the local device */
- tBTM_IO_CAP rmt_io_caps; /* IO Capabilities of the remot device */
-} tBTM_SP_CFM_REQ;
-
-/* data type for BTM_SP_KEY_REQ_EVT */
-typedef struct
-{
- BD_ADDR bd_addr; /* peer address */
- DEV_CLASS dev_class; /* peer CoD */
- tBTM_BD_NAME bd_name; /* peer device name */
-} tBTM_SP_KEY_REQ;
-
-/* data type for BTM_SP_KEY_NOTIF_EVT */
-typedef struct
-{
- BD_ADDR bd_addr; /* peer address */
- DEV_CLASS dev_class; /* peer CoD */
- tBTM_BD_NAME bd_name; /* peer device name */
- UINT32 passkey; /* passkey */
-} tBTM_SP_KEY_NOTIF;
-
-enum
-{
- BTM_SP_KEY_STARTED, /* 0 - passkey entry started */
- BTM_SP_KEY_ENTERED, /* 1 - passkey digit entered */
- BTM_SP_KEY_ERASED, /* 2 - passkey digit erased */
- BTM_SP_KEY_CLEARED, /* 3 - passkey cleared */
- BTM_SP_KEY_COMPLT, /* 4 - passkey entry completed */
- BTM_SP_KEY_OUT_OF_RANGE /* 5 - out of range */
-};
-typedef UINT8 tBTM_SP_KEY_TYPE;
-
-/* data type for BTM_SP_KEYPRESS_EVT */
-typedef struct
-{
- BD_ADDR bd_addr; /* peer address */
- tBTM_SP_KEY_TYPE notif_type;
-} tBTM_SP_KEYPRESS;
-
-/* data type for BTM_SP_LOC_OOB_EVT */
-typedef struct
-{
- tBTM_STATUS status; /* */
- BT_OCTET16 c; /* Simple Pairing Hash C */
- BT_OCTET16 r; /* Simple Pairing Randomnizer R */
-} tBTM_SP_LOC_OOB;
-
-/* data type for BTM_SP_RMT_OOB_EVT */
-typedef struct
-{
- BD_ADDR bd_addr; /* peer address */
- DEV_CLASS dev_class; /* peer CoD */
- tBTM_BD_NAME bd_name; /* peer device name */
-} tBTM_SP_RMT_OOB;
-
-
-/* data type for BTM_SP_COMPLT_EVT */
-typedef struct
-{
- BD_ADDR bd_addr; /* peer address */
- DEV_CLASS dev_class; /* peer CoD */
- tBTM_BD_NAME bd_name; /* peer device name */
- tBTM_STATUS status; /* status of the simple pairing process */
-} tBTM_SP_COMPLT;
-
-/* data type for BTM_SP_UPGRADE_EVT */
-typedef struct
-{
- BD_ADDR bd_addr; /* peer address */
- BOOLEAN upgrade; /* TRUE, to upgrade the link key */
-} tBTM_SP_UPGRADE;
-
-typedef union
-{
- tBTM_SP_IO_REQ io_req; /* BTM_SP_IO_REQ_EVT */
- tBTM_SP_IO_RSP io_rsp; /* BTM_SP_IO_RSP_EVT */
- tBTM_SP_CFM_REQ cfm_req; /* BTM_SP_CFM_REQ_EVT */
- tBTM_SP_KEY_NOTIF key_notif; /* BTM_SP_KEY_NOTIF_EVT */
- tBTM_SP_KEY_REQ key_req; /* BTM_SP_KEY_REQ_EVT */
- tBTM_SP_KEYPRESS key_press; /* BTM_SP_KEYPRESS_EVT */
- tBTM_SP_LOC_OOB loc_oob; /* BTM_SP_LOC_OOB_EVT */
- tBTM_SP_RMT_OOB rmt_oob; /* BTM_SP_RMT_OOB_EVT */
- tBTM_SP_COMPLT complt; /* BTM_SP_COMPLT_EVT */
- tBTM_SP_UPGRADE upgrade; /* BTM_SP_UPGRADE_EVT */
-} tBTM_SP_EVT_DATA;
-
-/* Simple Pairing Events. Called by the stack when Simple Pairing related
-** events occur.
-*/
-typedef UINT8 (tBTM_SP_CALLBACK) (tBTM_SP_EVT event, tBTM_SP_EVT_DATA *p_data);
-
-
-typedef void (tBTM_MKEY_CALLBACK) (BD_ADDR bd_addr, UINT8 status, UINT8 key_flag) ;
-
-/* Encryption enabled/disabled complete: Optionally passed with BTM_SetEncryption.
-** Parameters are
-** BD Address of remote
-** optional data passed in by BTM_SetEncryption
-** tBTM_STATUS - result of the operation
-*/
-typedef void (tBTM_SEC_CBACK) (BD_ADDR bd_addr, tBT_TRANSPORT trasnport,
- void *p_ref_data, tBTM_STATUS result);
-
-/* Bond Cancel complete. Parameters are
-** Result of the cancel operation
-**
-*/
-typedef void (tBTM_BOND_CANCEL_CMPL_CALLBACK) (tBTM_STATUS result);
-
-/* LE related event and data structure
-*/
-#define BTM_LE_IO_REQ_EVT SMP_IO_CAP_REQ_EVT /* received IO_CAPABILITY_REQUEST event */
-#define BTM_LE_SEC_REQUEST_EVT SMP_SEC_REQUEST_EVT /* security request event */
-#define BTM_LE_KEY_NOTIF_EVT SMP_PASSKEY_NOTIF_EVT /* received USER_PASSKEY_NOTIFY event */
-#define BTM_LE_KEY_REQ_EVT SMP_PASSKEY_REQ_EVT /* received USER_PASSKEY_REQUEST event */
-#define BTM_LE_OOB_REQ_EVT SMP_OOB_REQ_EVT /* OOB data request event */
-#define BTM_LE_NC_REQ_EVT SMP_NC_REQ_EVT /* Numeric Comparison request event */
-#define BTM_LE_PR_KEYPR_NOT_EVT SMP_PEER_KEYPR_NOT_EVT /* Peer keypress notification recd event */
-/* SC OOB request event (both local and peer OOB data) can be expected in response */
-#define BTM_LE_SC_OOB_REQ_EVT SMP_SC_OOB_REQ_EVT
-/* SC OOB local data set is created (as result of SMP_CrLocScOobData(...)) */
-#define BTM_LE_SC_LOC_OOB_EVT SMP_SC_LOC_OOB_DATA_UP_EVT
-#define BTM_LE_BR_KEYS_REQ_EVT SMP_BR_KEYS_REQ_EVT /* SMP over BR keys request event */
-#define BTM_LE_COMPLT_EVT SMP_COMPLT_EVT /* SMP complete event */
-#define BTM_LE_LAST_FROM_SMP BTM_LE_BR_KEYS_REQ_EVT
-#define BTM_LE_KEY_EVT BTM_LE_LAST_FROM_SMP + 1 /* KEY update event */
-typedef UINT8 tBTM_LE_EVT;
-
-#define BTM_LE_KEY_NONE 0
-#define BTM_LE_KEY_PENC SMP_SEC_KEY_TYPE_ENC /* encryption information of peer device */
-#define BTM_LE_KEY_PID SMP_SEC_KEY_TYPE_ID /* identity key of the peer device */
-#define BTM_LE_KEY_PCSRK SMP_SEC_KEY_TYPE_CSRK /* peer SRK */
-#define BTM_LE_KEY_PLK SMP_SEC_KEY_TYPE_LK
-#define BTM_LE_KEY_LLK (SMP_SEC_KEY_TYPE_LK << 4)
-#define BTM_LE_KEY_LENC (SMP_SEC_KEY_TYPE_ENC << 4) /* master role security information:div */
-#define BTM_LE_KEY_LID (SMP_SEC_KEY_TYPE_ID << 4) /* master device ID key */
-#define BTM_LE_KEY_LCSRK (SMP_SEC_KEY_TYPE_CSRK << 4) /* local CSRK has been deliver to peer */
-typedef UINT8 tBTM_LE_KEY_TYPE;
-
-#define BTM_LE_AUTH_REQ_NO_BOND SMP_AUTH_NO_BOND /* 0 */
-#define BTM_LE_AUTH_REQ_BOND SMP_AUTH_GEN_BOND /* 1 << 0 */
-#define BTM_LE_AUTH_REQ_MITM SMP_AUTH_YN_BIT /* 1 << 2 */
-typedef UINT8 tBTM_LE_AUTH_REQ;
-#define BTM_LE_SC_SUPPORT_BIT SMP_SC_SUPPORT_BIT /* (1 << 3) */
-#define BTM_LE_KP_SUPPORT_BIT SMP_KP_SUPPORT_BIT /* (1 << 4) */
-
-#define BTM_LE_AUTH_REQ_SC_ONLY SMP_AUTH_SC_ENC_ONLY /* 1 << 3 */
-#define BTM_LE_AUTH_REQ_SC_BOND SMP_AUTH_SC_GB /* 1001 */
-#define BTM_LE_AUTH_REQ_SC_MITM SMP_AUTH_SC_MITM_NB /* 1100 */
-#define BTM_LE_AUTH_REQ_SC_MITM_BOND SMP_AUTH_SC_MITM_GB /* 1101 */
-#define BTM_LE_AUTH_REQ_MASK SMP_AUTH_MASK /* 0x1D */
-
-/* LE security level */
-#define BTM_LE_SEC_NONE SMP_SEC_NONE
-#define BTM_LE_SEC_UNAUTHENTICATE SMP_SEC_UNAUTHENTICATE /* 1 */
-#define BTM_LE_SEC_AUTHENTICATED SMP_SEC_AUTHENTICATED /* 4 */
-typedef UINT8 tBTM_LE_SEC;
-
-
-typedef struct
-{
- tBTM_IO_CAP io_cap; /* local IO capabilities */
- UINT8 oob_data; /* OOB data present (locally) for the peer device */
- tBTM_LE_AUTH_REQ auth_req; /* Authentication request (for local device) contain bonding and MITM info */
- UINT8 max_key_size; /* max encryption key size */
- tBTM_LE_KEY_TYPE init_keys; /* keys to be distributed, bit mask */
- tBTM_LE_KEY_TYPE resp_keys; /* keys to be distributed, bit mask */
-} tBTM_LE_IO_REQ;
-
-#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
-/* data type for tBTM_LE_COMPLT */
-typedef struct
-{
- UINT8 reason;
- UINT8 sec_level;
- BOOLEAN is_pair_cancel;
- BOOLEAN smp_over_br;
-}tBTM_LE_COMPLT;
-#endif
-
-/* BLE encryption keys */
-typedef struct
-{
- BT_OCTET16 ltk;
- BT_OCTET8 rand;
- UINT16 ediv;
- UINT8 sec_level;
- UINT8 key_size;
-}tBTM_LE_PENC_KEYS;
-
-/* BLE CSRK keys */
-typedef struct
-{
- UINT32 counter;
- BT_OCTET16 csrk;
- UINT8 sec_level;
-}tBTM_LE_PCSRK_KEYS;
-
-/* BLE Encryption reproduction keys */
-typedef struct
-{
- BT_OCTET16 ltk;
- UINT16 div;
- UINT8 key_size;
- UINT8 sec_level;
-}tBTM_LE_LENC_KEYS;
-
-/* BLE SRK keys */
-typedef struct
-{
- UINT32 counter;
- UINT16 div;
- UINT8 sec_level;
- BT_OCTET16 csrk;
-}tBTM_LE_LCSRK_KEYS;
-
-typedef struct
-{
- BT_OCTET16 irk;
- tBLE_ADDR_TYPE addr_type;
- BD_ADDR static_addr;
-}tBTM_LE_PID_KEYS;
-
-typedef union
-{
- tBTM_LE_PENC_KEYS penc_key; /* received peer encryption key */
- tBTM_LE_PCSRK_KEYS pcsrk_key; /* received peer device SRK */
- tBTM_LE_PID_KEYS pid_key; /* peer device ID key */
- tBTM_LE_LENC_KEYS lenc_key; /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/
- tBTM_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/
-}tBTM_LE_KEY_VALUE;
-
-typedef struct
-{
- tBTM_LE_KEY_TYPE key_type;
- tBTM_LE_KEY_VALUE *p_key_value;
-}tBTM_LE_KEY;
-
-typedef union
-{
- tBTM_LE_IO_REQ io_req; /* BTM_LE_IO_REQ_EVT */
- UINT32 key_notif; /* BTM_LE_KEY_NOTIF_EVT */
- /* BTM_LE_NC_REQ_EVT */
- /* no callback data for BTM_LE_KEY_REQ_EVT */
- /* and BTM_LE_OOB_REQ_EVT */
-#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
- tBTM_LE_COMPLT complt; /* BTM_LE_COMPLT_EVT */
- tSMP_OOB_DATA_TYPE req_oob_type;
-#endif
- tBTM_LE_KEY key;
-} tBTM_LE_EVT_DATA;
-
-/* Simple Pairing Events. Called by the stack when Simple Pairing related
-** events occur.
-*/
-typedef UINT8 (tBTM_LE_CALLBACK) (tBTM_LE_EVT event, BD_ADDR bda, tBTM_LE_EVT_DATA *p_data);
-
-#define BTM_BLE_KEY_TYPE_ID 1
-#define BTM_BLE_KEY_TYPE_ER 2
-#define BTM_BLE_KEY_TYPE_COUNTER 3 //tobe obsolete
-
-typedef struct
-{
- BT_OCTET16 ir;
- BT_OCTET16 irk;
- BT_OCTET16 dhk;
-
-}tBTM_BLE_LOCAL_ID_KEYS;
-
-typedef union
-{
- tBTM_BLE_LOCAL_ID_KEYS id_keys;
- BT_OCTET16 er;
-}tBTM_BLE_LOCAL_KEYS;
-
-
-/* New LE identity key for local device.
-*/
-typedef void (tBTM_LE_KEY_CALLBACK) (UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key);
-
-
-/***************************
-** Security Manager Types
-****************************/
-/* Structure that applications use to register with BTM_SecRegister */
-typedef struct
-{
- tBTM_AUTHORIZE_CALLBACK *p_authorize_callback;
- tBTM_PIN_CALLBACK *p_pin_callback;
- tBTM_LINK_KEY_CALLBACK *p_link_key_callback;
- tBTM_AUTH_COMPLETE_CALLBACK *p_auth_complete_callback;
- tBTM_BOND_CANCEL_CMPL_CALLBACK *p_bond_cancel_cmpl_callback;
- tBTM_SP_CALLBACK *p_sp_callback;
-#if BLE_INCLUDED == TRUE
-#if SMP_INCLUDED == TRUE
- tBTM_LE_CALLBACK *p_le_callback;
-#endif
- tBTM_LE_KEY_CALLBACK *p_le_key_callback;
-#endif
-} tBTM_APPL_INFO;
-
-/* Callback function for when a link supervision timeout event occurs.
-** This asynchronous event is enabled/disabled by calling BTM_RegForLstoEvt().
-*/
-typedef void (tBTM_LSTO_CBACK) (BD_ADDR remote_bda, UINT16 timeout);
-
-/*****************************************************************************
-** POWER MANAGEMENT
-*****************************************************************************/
-/****************************
-** Power Manager Constants
-*****************************/
-/* BTM Power manager status codes */
-enum
-{
- BTM_PM_STS_ACTIVE = HCI_MODE_ACTIVE,
- BTM_PM_STS_HOLD = HCI_MODE_HOLD,
- BTM_PM_STS_SNIFF = HCI_MODE_SNIFF,
- BTM_PM_STS_PARK = HCI_MODE_PARK,
- BTM_PM_STS_SSR, /* report the SSR parameters in HCI_SNIFF_SUB_RATE_EVT */
- BTM_PM_STS_PENDING, /* when waiting for status from controller */
- BTM_PM_STS_ERROR /* when HCI command status returns error */
-};
-typedef UINT8 tBTM_PM_STATUS;
-
-/* BTM Power manager modes */
-enum
-{
- BTM_PM_MD_ACTIVE = BTM_PM_STS_ACTIVE,
- BTM_PM_MD_HOLD = BTM_PM_STS_HOLD,
- BTM_PM_MD_SNIFF = BTM_PM_STS_SNIFF,
- BTM_PM_MD_PARK = BTM_PM_STS_PARK,
- BTM_PM_MD_FORCE = 0x10 /* OR this to force ACL link to a certain mode */
-};
-typedef UINT8 tBTM_PM_MODE;
-
-#define BTM_PM_SET_ONLY_ID 0x80
-
-/* Operation codes */
-#define BTM_PM_REG_SET 1 /* The module wants to set the desired power mode */
-#define BTM_PM_REG_NOTIF 2 /* The module wants to receive mode change event */
-#define BTM_PM_DEREG 4 /* The module does not want to involve with PM anymore */
-
-/************************
-** Power Manager Types
-*************************/
-typedef struct
-{
- UINT16 max;
- UINT16 min;
- UINT16 attempt;
- UINT16 timeout;
- tBTM_PM_MODE mode;
-} tBTM_PM_PWR_MD;
-
-/*************************************
-** Power Manager Callback Functions
-**************************************/
-typedef void (tBTM_PM_STATUS_CBACK) (BD_ADDR p_bda, tBTM_PM_STATUS status,
- UINT16 value, UINT8 hci_status);
-
-
-/************************
-** Stored Linkkey Types
-*************************/
-#define BTM_CB_EVT_DELETE_STORED_LINK_KEYS 4
-
-typedef struct
-{
- UINT8 event;
- UINT8 status;
- UINT16 num_keys;
-
-} tBTM_DELETE_STORED_LINK_KEY_COMPLETE;
-
-/* MIP evnets, callbacks */
-enum
-{
- BTM_MIP_MODE_CHG_EVT,
- BTM_MIP_DISCONNECT_EVT,
- BTM_MIP_PKTS_COMPL_EVT,
- BTM_MIP_RXDATA_EVT
-};
-typedef UINT8 tBTM_MIP_EVT;
-
-typedef struct
-{
- tBTM_MIP_EVT event;
- BD_ADDR bd_addr;
- UINT16 mip_id;
-} tBTM_MIP_MODE_CHANGE;
-
-typedef struct
-{
- tBTM_MIP_EVT event;
- UINT16 mip_id;
- UINT8 disc_reason;
-} tBTM_MIP_CONN_TIMEOUT;
-
-#define BTM_MIP_MAX_RX_LEN 17
-
-typedef struct
-{
- tBTM_MIP_EVT event;
- UINT16 mip_id;
- UINT8 rx_len;
- UINT8 rx_data[BTM_MIP_MAX_RX_LEN];
-} tBTM_MIP_RXDATA;
-
-typedef struct
-{
- tBTM_MIP_EVT event;
- BD_ADDR bd_addr;
- UINT8 data[11]; /* data[0] shows Vender-specific device type */
-} tBTM_MIP_EIR_HANDSHAKE;
-
-typedef struct
-{
- tBTM_MIP_EVT event;
- UINT16 num_sent; /* Number of packets completed at the controller */
-} tBTM_MIP_PKTS_COMPL;
-
-typedef union
-{
- tBTM_MIP_EVT event;
- tBTM_MIP_MODE_CHANGE mod_chg;
- tBTM_MIP_CONN_TIMEOUT conn_tmo;
- tBTM_MIP_EIR_HANDSHAKE eir;
- tBTM_MIP_PKTS_COMPL completed;
- tBTM_MIP_RXDATA rxdata;
-} tBTM_MIP_EVENT_DATA;
-
-/* MIP event callback function */
-typedef void (tBTM_MIP_EVENTS_CB) (tBTM_MIP_EVT event, tBTM_MIP_EVENT_DATA data);
-
-/* MIP Device query callback function */
-typedef BOOLEAN (tBTM_MIP_QUERY_CB) (BD_ADDR dev_addr, UINT8 *p_mode, LINK_KEY link_key);
-
-#define BTM_CONTRL_ACTIVE 1 /* ACL link on, SCO link ongoing, sniff mode */
-#define BTM_CONTRL_SCAN 2 /* Scan state - paging/inquiry/trying to connect*/
-#define BTM_CONTRL_IDLE 3 /* Idle state - page scan, LE advt, inquiry scan */
-
-typedef UINT8 tBTM_CONTRL_STATE;
/*****************************************************************************
** EXTERNAL FUNCTION DECLARATIONS
**
** Description This function is called to check if the device is up.
**
-** Returns TRUE if device is up, else FALSE
+** Returns true if device is up, else false
**
*******************************************************************************/
-extern BOOLEAN BTM_IsDeviceUp (void);
+extern bool BTM_IsDeviceUp (void);
/*******************************************************************************
** Returns pointer to the device class
**
*******************************************************************************/
-extern UINT8 *BTM_ReadDeviceClass (void);
+extern uint8_t *BTM_ReadDeviceClass (void);
/*******************************************************************************
** Returns pointer to the local features string
**
*******************************************************************************/
-extern UINT8 *BTM_ReadLocalFeatures (void);
+extern uint8_t *BTM_ReadLocalFeatures (void);
/*******************************************************************************
**
** Description This function is called to register/deregister for vendor
** specific HCI events.
**
-** If is_register=TRUE, then the function will be registered;
-** if is_register=FALSE, then the function will be deregistered.
+** If is_register=true, then the function will be registered;
+** if is_register=false, then the function will be deregistered.
**
** Returns BTM_SUCCESS if successful,
** BTM_BUSY if maximum number of callbacks have already been
** registered.
**
*******************************************************************************/
-extern tBTM_STATUS BTM_RegisterForVSEvents (tBTM_VS_EVT_CB *p_cb, BOOLEAN is_register);
+extern tBTM_STATUS BTM_RegisterForVSEvents (tBTM_VS_EVT_CB *p_cb, bool is_register);
/*******************************************************************************
**
** Description Send a vendor specific HCI command to the controller.
**
-** Returns
-** BTM_SUCCESS Command sent. Does not expect command complete
-** event. (command cmpl callback param is NULL)
-** BTM_CMD_STARTED Command sent. Waiting for command cmpl event.
-** BTM_BUSY Command not sent. Waiting for cmd cmpl event for
-** prior command.
-**
*******************************************************************************/
-extern tBTM_STATUS BTM_VendorSpecificCommand(UINT16 opcode,
- UINT8 param_len,
- UINT8 *p_param_buf,
- tBTM_VSC_CMPL_CB *p_cb);
+extern void BTM_VendorSpecificCommand(uint16_t opcode,
+ uint8_t param_len,
+ uint8_t *p_param_buf,
+ tBTM_VSC_CMPL_CB *p_cb);
/*******************************************************************************
** Returns Allocated SCN number or 0 if none.
**
*******************************************************************************/
-extern UINT8 BTM_AllocateSCN(void);
+extern uint8_t BTM_AllocateSCN(void);
/*******************************************************************************
**
**
** Description Try to allocate a fixed server channel
**
-** Returns Returns TRUE if server channel was available
+** Returns Returns true if server channel was available
**
*******************************************************************************/
-extern BOOLEAN BTM_TryAllocateSCN(UINT8 scn);
+extern bool BTM_TryAllocateSCN(uint8_t scn);
/*******************************************************************************
**
** Description Free the specified SCN.
**
-** Returns TRUE if successful, FALSE if SCN is not in use or invalid
+** Returns true if successful, false if SCN is not in use or invalid
**
*******************************************************************************/
-extern BOOLEAN BTM_FreeSCN(UINT8 scn);
+extern bool BTM_FreeSCN(uint8_t scn);
/*******************************************************************************
** Returns The new or current trace level
**
*******************************************************************************/
-extern UINT8 BTM_SetTraceLevel (UINT8 new_level);
+extern uint8_t BTM_SetTraceLevel (uint8_t new_level);
/*******************************************************************************
**
** Description Send HCI Wite Page Timeout.
**
-** Returns
-** BTM_SUCCESS Command sent.
-** BTM_NO_RESOURCES If out of resources to send the command.
-**
*******************************************************************************/
-extern tBTM_STATUS BTM_WritePageTimeout(UINT16 timeout);
+extern void BTM_WritePageTimeout(uint16_t timeout);
/*******************************************************************************
**
** Description Send HCI Write Voice Settings command.
** See hcidefs.h for settings bitmask values.
**
-** Returns
-** BTM_SUCCESS Command sent.
-** BTM_NO_RESOURCES If out of resources to send the command.
-**
-**
*******************************************************************************/
-extern tBTM_STATUS BTM_WriteVoiceSettings(UINT16 settings);
+extern void BTM_WriteVoiceSettings(uint16_t settings);
/*******************************************************************************
**
** BTM_WRONG_MODE if the device is not up.
**
*******************************************************************************/
-extern tBTM_STATUS BTM_SetDiscoverability (UINT16 inq_mode, UINT16 window,
- UINT16 interval);
+extern tBTM_STATUS BTM_SetDiscoverability (uint16_t inq_mode, uint16_t window,
+ uint16_t interval);
/*******************************************************************************
** BTM_GENERAL_DISCOVERABLE
**
*******************************************************************************/
-extern UINT16 BTM_ReadDiscoverability (UINT16 *p_window,
- UINT16 *p_interval);
+extern uint16_t BTM_ReadDiscoverability (uint16_t *p_window,
+ uint16_t *p_interval);
/*******************************************************************************
**
*******************************************************************************/
extern tBTM_STATUS BTM_SetPeriodicInquiryMode (tBTM_INQ_PARMS *p_inqparms,
- UINT16 max_delay, UINT16 min_delay,
+ uint16_t max_delay, uint16_t min_delay,
tBTM_INQ_RESULTS_CB *p_results_cb);
** BTM_PERIODIC_INQUIRY_ACTIVE if a periodic inquiry is active
**
*******************************************************************************/
-extern UINT16 BTM_IsInquiryActive (void);
+extern uint16_t BTM_IsInquiryActive (void);
/*******************************************************************************
** BTM_WRONG_MODE if the device is not up.
**
*******************************************************************************/
-extern tBTM_STATUS BTM_SetConnectability (UINT16 page_mode, UINT16 window,
- UINT16 interval);
+extern tBTM_STATUS BTM_SetConnectability (uint16_t page_mode, uint16_t window,
+ uint16_t interval);
/*******************************************************************************
** Returns BTM_NON_CONNECTABLE or BTM_CONNECTABLE
**
*******************************************************************************/
-extern UINT16 BTM_ReadConnectability (UINT16 *p_window, UINT16 *p_interval);
+extern uint16_t BTM_ReadConnectability (uint16_t *p_window, uint16_t *p_interval);
/*******************************************************************************
** BTM_WRONG_MODE if the device is not up.
**
*******************************************************************************/
-extern tBTM_STATUS BTM_SetInquiryMode (UINT8 mode);
+extern tBTM_STATUS BTM_SetInquiryMode (uint8_t mode);
/*******************************************************************************
**
** BTM_WRONG_MODE if the device is not up.
**
*******************************************************************************/
-extern tBTM_STATUS BTM_SetInquiryScanType (UINT16 scan_type);
+extern tBTM_STATUS BTM_SetInquiryScanType (uint16_t scan_type);
/*******************************************************************************
**
**
*******************************************************************************/
-extern tBTM_STATUS BTM_SetPageScanType (UINT16 scan_type);
+extern tBTM_STATUS BTM_SetPageScanType (uint16_t scan_type);
/*******************************************************************************
**
**
*******************************************************************************/
extern tBTM_STATUS BTM_ReadRemoteVersion (BD_ADDR addr,
- UINT8 *lmp_version,
- UINT16 *manufacturer,
- UINT16 *lmp_sub_version);
+ uint8_t *lmp_version,
+ uint16_t *manufacturer,
+ uint16_t *lmp_sub_version);
/*******************************************************************************
**
** Returns pointer to the remote supported features mask
**
*******************************************************************************/
-extern UINT8 *BTM_ReadRemoteFeatures (BD_ADDR addr);
+extern uint8_t *BTM_ReadRemoteFeatures (BD_ADDR addr);
/*******************************************************************************
**
** or NULL if page_number is not valid
**
*******************************************************************************/
-extern UINT8 *BTM_ReadRemoteExtendedFeatures (BD_ADDR addr, UINT8 page_number);
+extern uint8_t *BTM_ReadRemoteExtendedFeatures (BD_ADDR addr, uint8_t page_number);
/*******************************************************************************
**
** Returns number of features pages read from the remote device
**
*******************************************************************************/
-extern UINT8 BTM_ReadNumberRemoteFeaturesPages (BD_ADDR addr);
+extern uint8_t BTM_ReadNumberRemoteFeaturesPages (BD_ADDR addr);
/*******************************************************************************
**
** BTM_FEATURE_BYTES_PER_PAGE * (BTM_EXT_FEATURES_PAGE_MAX + 1).
**
*******************************************************************************/
-extern UINT8 *BTM_ReadAllRemoteFeatures (BD_ADDR addr);
+extern uint8_t *BTM_ReadAllRemoteFeatures (BD_ADDR addr);
/*******************************************************************************
**
** Returns Pointer to matching record, or NULL
**
*******************************************************************************/
-extern tSDP_DISC_REC *BTM_FindAttribute (UINT16 attr_id,
+extern tSDP_DISC_REC *BTM_FindAttribute (uint16_t attr_id,
tSDP_DISC_REC *p_start_rec);
** Returns Pointer to matching record, or NULL
**
*******************************************************************************/
-extern tSDP_DISC_REC *BTM_FindService (UINT16 service_uuid,
+extern tSDP_DISC_REC *BTM_FindService (uint16_t service_uuid,
tSDP_DISC_REC *p_start_rec);
** Returns void
**
*******************************************************************************/
-extern void BTM_SetDiscoveryParams (UINT16 num_uuid, tSDP_UUID *p_uuid_list,
- UINT16 num_attr, UINT16 *p_attr_list);
+extern void BTM_SetDiscoveryParams (uint16_t num_uuid, tSDP_UUID *p_uuid_list,
+ uint16_t num_attr, uint16_t *p_attr_list);
/*****************************************************************************
**
*******************************************************************************/
extern tBTM_STATUS BTM_SetLinkPolicy (BD_ADDR remote_bda,
- UINT16 *settings);
+ uint16_t *settings);
/*******************************************************************************
**
** Returns void
**
*******************************************************************************/
-extern void BTM_SetDefaultLinkPolicy (UINT16 settings);
+extern void BTM_SetDefaultLinkPolicy (uint16_t settings);
/*******************************************************************************
** Returns void
**
*******************************************************************************/
-extern void BTM_SetDefaultLinkSuperTout (UINT16 timeout);
+extern void BTM_SetDefaultLinkSuperTout (uint16_t timeout);
/*******************************************************************************
**
*******************************************************************************/
extern tBTM_STATUS BTM_SetLinkSuperTout (BD_ADDR remote_bda,
- UINT16 timeout);
+ uint16_t timeout);
/*******************************************************************************
**
** Function BTM_GetLinkSuperTout
**
*******************************************************************************/
extern tBTM_STATUS BTM_GetLinkSuperTout (BD_ADDR remote_bda,
- UINT16 *p_timeout);
+ uint16_t *p_timeout);
/*******************************************************************************
**
** Description This function is called to check if an ACL connection exists
** to a specific remote BD Address.
**
-** Returns TRUE if connection is up, else FALSE.
+** Returns true if connection is up, else false.
**
*******************************************************************************/
-extern BOOLEAN BTM_IsAclConnectionUp (BD_ADDR remote_bda, tBT_TRANSPORT transport);
+extern bool BTM_IsAclConnectionUp (BD_ADDR remote_bda, tBT_TRANSPORT transport);
/*******************************************************************************
** BTM_UNKNOWN_ADDR if no active link with bd addr specified
**
*******************************************************************************/
-extern tBTM_STATUS BTM_GetRole (BD_ADDR remote_bd_addr, UINT8 *p_role);
+extern tBTM_STATUS BTM_GetRole (BD_ADDR remote_bd_addr, uint8_t *p_role);
**
*******************************************************************************/
extern tBTM_STATUS BTM_SwitchRole (BD_ADDR remote_bd_addr,
- UINT8 new_role,
+ uint8_t new_role,
tBTM_CMPL_CB *p_cb);
/*******************************************************************************
** Returns BTM_SUCCESS if successfully registered, otherwise error
**
*******************************************************************************/
-extern tBTM_STATUS BTM_RegBusyLevelNotif (tBTM_BL_CHANGE_CB *p_cb, UINT8 *p_level,
+extern tBTM_STATUS BTM_RegBusyLevelNotif (tBTM_BL_CHANGE_CB *p_cb, uint8_t *p_level,
tBTM_BL_EVENT_MASK evt_mask);
/*******************************************************************************
** Description This function is called to count the number of
** ACL links that are active.
**
-** Returns UINT16 Number of active ACL links
+** Returns uint16_t Number of active ACL links
**
*******************************************************************************/
-extern UINT16 BTM_GetNumAclLinks (void);
+extern uint16_t BTM_GetNumAclLinks (void);
/*******************************************************************************
**
** Function BTM_CreateSco
**
** Description This function is called to create an SCO connection. If the
-** "is_orig" flag is TRUE, the connection will be originated,
+** "is_orig" flag is true, the connection will be originated,
** otherwise BTM will wait for the other side to connect.
**
** Returns BTM_UNKNOWN_ADDR if the ACL connection is not up
** with the sco index used for the connection.
**
*******************************************************************************/
-extern tBTM_STATUS BTM_CreateSco (BD_ADDR remote_bda, BOOLEAN is_orig,
- UINT16 pkt_types, UINT16 *p_sco_inx,
+extern tBTM_STATUS BTM_CreateSco (BD_ADDR remote_bda, bool is_orig,
+ uint16_t pkt_types, uint16_t *p_sco_inx,
tBTM_SCO_CB *p_conn_cb,
tBTM_SCO_CB *p_disc_cb);
** Returns BTM_CMD_STARTED if successfully initiated, otherwise error
**
*******************************************************************************/
-extern tBTM_STATUS BTM_RemoveSco (UINT16 sco_inx);
+extern tBTM_STATUS BTM_RemoveSco (uint16_t sco_inx);
/*******************************************************************************
** Returns BTM_CMD_STARTED if successfully initiated, otherwise error
**
*******************************************************************************/
-extern tBTM_STATUS BTM_SetScoPacketTypes (UINT16 sco_inx, UINT16 pkt_types);
+extern tBTM_STATUS BTM_SetScoPacketTypes (uint16_t sco_inx, uint16_t pkt_types);
/*******************************************************************************
** Returns packet types supported for the connection
**
*******************************************************************************/
-extern UINT16 BTM_ReadScoPacketTypes (UINT16 sco_inx);
+extern uint16_t BTM_ReadScoPacketTypes (uint16_t sco_inx);
/*******************************************************************************
** Returns packet types supported by the device.
**
*******************************************************************************/
-extern UINT16 BTM_ReadDeviceScoPacketTypes (void);
+extern uint16_t BTM_ReadDeviceScoPacketTypes (void);
/*******************************************************************************
** Returns handle for the connection, or 0xFFFF if invalid SCO index.
**
*******************************************************************************/
-extern UINT16 BTM_ReadScoHandle (UINT16 sco_inx);
+extern uint16_t BTM_ReadScoHandle (uint16_t sco_inx);
/*******************************************************************************
** Returns pointer to BD address or NULL if not known
**
*******************************************************************************/
-extern UINT8 *BTM_ReadScoBdAddr (UINT16 sco_inx);
+extern uint8_t *BTM_ReadScoBdAddr (uint16_t sco_inx);
/*******************************************************************************
** Returns HCI reason or BTM_INVALID_SCO_DISC_REASON if not set.
**
*******************************************************************************/
-extern UINT16 BTM_ReadScoDiscReason (void);
+extern uint16_t BTM_ReadScoDiscReason (void);
/*******************************************************************************
** BTM_ILLEGAL_VALUE if there is an illegal sco_inx
**
*******************************************************************************/
-extern tBTM_STATUS BTM_RegForEScoEvts (UINT16 sco_inx,
+extern tBTM_STATUS BTM_RegForEScoEvts (uint16_t sco_inx,
tBTM_ESCO_CBACK *p_esco_cback);
/*******************************************************************************
** 1.2 specification.
**
*******************************************************************************/
-extern tBTM_STATUS BTM_ReadEScoLinkParms (UINT16 sco_inx,
+extern tBTM_STATUS BTM_ReadEScoLinkParms (uint16_t sco_inx,
tBTM_ESCO_DATA *p_parms);
/*******************************************************************************
** 1.2 specification.
**
*******************************************************************************/
-extern tBTM_STATUS BTM_ChangeEScoLinkParms (UINT16 sco_inx,
+extern tBTM_STATUS BTM_ChangeEScoLinkParms (uint16_t sco_inx,
tBTM_CHG_ESCO_PARAMS *p_parms);
/*******************************************************************************
** Returns void
**
*******************************************************************************/
-extern void BTM_EScoConnRsp (UINT16 sco_inx, UINT8 hci_status,
+extern void BTM_EScoConnRsp (uint16_t sco_inx, uint8_t hci_status,
tBTM_ESCO_PARAMS *p_parms);
/*******************************************************************************
**
** Description This function returns the number of active SCO links.
**
-** Returns UINT8
+** Returns uint8_t
**
*******************************************************************************/
-extern UINT8 BTM_GetNumScoLinks (void);
+extern uint8_t BTM_GetNumScoLinks (void);
/*****************************************************************************
** SECURITY MANAGEMENT FUNCTIONS
** security services. There can be one and only one application
** saving link keys. BTM allows only first registration.
**
-** Returns TRUE if registered OK, else FALSE
+** Returns true if registered OK, else false
**
*******************************************************************************/
-extern BOOLEAN BTM_SecRegister (tBTM_APPL_INFO *p_cb_info);
+extern bool BTM_SecRegister (tBTM_APPL_INFO *p_cb_info);
/*******************************************************************************
**
** Description Profiles can register to be notified when a new Link Key
** is generated per connection.
**
-** Returns TRUE if registered OK, else FALSE
+** Returns true if registered OK, else false
**
*******************************************************************************/
-extern BOOLEAN BTM_SecRegisterLinkKeyNotificationCallback(
+extern bool BTM_SecRegisterLinkKeyNotificationCallback(
tBTM_LINK_KEY_CALLBACK *p_callback);
/*******************************************************************************
** Description Profiles can register to be notified when name of the
** remote device is resolved (up to BTM_SEC_MAX_RMT_NAME_CALLBACKS).
**
-** Returns TRUE if registered OK, else FALSE
+** Returns true if registered OK, else false
**
*******************************************************************************/
-extern BOOLEAN BTM_SecAddRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback);
+extern bool BTM_SecAddRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback);
/*******************************************************************************
** Description A profile can deregister notification when a new Link Key
** is generated per connection.
**
-** Returns TRUE if OK, else FALSE
+** Returns true if OK, else false
**
*******************************************************************************/
-extern BOOLEAN BTM_SecDeleteRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback);
+extern bool BTM_SecDeleteRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback);
/*******************************************************************************
**
**
** Description Get security flags for the device
**
-** Returns BOOLEAN TRUE or FALSE is device found
+** Returns bool true or false is device found
**
*******************************************************************************/
-extern BOOLEAN BTM_GetSecurityFlags (BD_ADDR bd_addr, UINT8 * p_sec_flags);
+extern bool BTM_GetSecurityFlags (BD_ADDR bd_addr, uint8_t * p_sec_flags);
/*******************************************************************************
**
** p_sec_flags : Out parameter to be filled with security flags for the connection
** transport : Physical transport of the connection (BR/EDR or LE)
**
-** Returns BOOLEAN TRUE or FALSE is device found
+** Returns bool true or false is device found
**
*******************************************************************************/
-extern BOOLEAN BTM_GetSecurityFlagsByTransport (BD_ADDR bd_addr,
- UINT8 * p_sec_flags, tBT_TRANSPORT transport);
+extern bool BTM_GetSecurityFlagsByTransport (BD_ADDR bd_addr,
+ uint8_t * p_sec_flags, tBT_TRANSPORT transport);
/*******************************************************************************
**
** otherwise, the trusted mask
**
*******************************************************************************/
-extern UINT32 * BTM_ReadTrustedMask (BD_ADDR bd_addr);
+extern uint32_t * BTM_ReadTrustedMask (BD_ADDR bd_addr);
/*******************************************************************************
**
** Returns void
**
*******************************************************************************/
-extern void BTM_SetPinType (UINT8 pin_type, PIN_CODE pin_code, UINT8 pin_code_len);
+extern void BTM_SetPinType (uint8_t pin_type, PIN_CODE pin_code, uint8_t pin_code_len);
/*******************************************************************************
**
** Description Enable or disable pairing
**
-** Parameters allow_pairing - (TRUE or FALSE) whether or not the device
+** Parameters allow_pairing - (true or false) whether or not the device
** allows pairing.
-** connect_only_paired - (TRUE or FALSE) whether or not to
+** connect_only_paired - (true or false) whether or not to
** only allow paired devices to connect.
**
** Returns void
**
*******************************************************************************/
-extern void BTM_SetPairableMode (BOOLEAN allow_pairing, BOOLEAN connect_only_paired);
+extern void BTM_SetPairableMode (bool allow_pairing, bool connect_only_paired);
/*******************************************************************************
**
**
** Description Enable or disable default treatment for Mode 4 Level 0 services
**
-** Parameter secure_connections_only_mode - (TRUE or FALSE)
-** TRUE means that the device should treat Mode 4 Level 0 services as
+** Parameter secure_connections_only_mode - (true or false)
+** true means that the device should treat Mode 4 Level 0 services as
** services of other levels.
-** FALSE means that the device should provide default treatment for
+** false means that the device should provide default treatment for
** Mode 4 Level 0 services.
**
** Returns void
**
*******************************************************************************/
-extern void BTM_SetSecureConnectionsOnly (BOOLEAN secure_connections_only_mode);
+extern void BTM_SetSecureConnectionsOnly (bool secure_connections_only_mode);
/*******************************************************************************
**
** security level that is used. This API is called once for originators
** nad again for acceptors of connections.
**
-** Returns TRUE if registered OK, else FALSE
+** Returns true if registered OK, else false
**
*******************************************************************************/
-extern BOOLEAN BTM_SetSecurityLevel (BOOLEAN is_originator, char *p_name,
- UINT8 service_id, UINT16 sec_level,
- UINT16 psm, UINT32 mx_proto_id,
- UINT32 mx_chan_id);
+extern bool BTM_SetSecurityLevel (bool is_originator, const char *p_name,
+ uint8_t service_id, uint16_t sec_level,
+ uint16_t psm, uint32_t mx_proto_id,
+ uint32_t mx_chan_id);
/*******************************************************************************
**
** Returns void
**
*******************************************************************************/
-extern void BTM_SetOutService(BD_ADDR bd_addr, UINT8 service_id, UINT32 mx_chan_id);
+extern void BTM_SetOutService(BD_ADDR bd_addr, uint8_t service_id, uint32_t mx_chan_id);
/*******************************************************************************
**
** Returns Number of records that were freed.
**
*******************************************************************************/
-extern UINT8 BTM_SecClrService (UINT8 service_id);
+extern uint8_t BTM_SecClrService (uint8_t service_id);
/*******************************************************************************
**
** stored in the NVRAM.
** dev_class, bd_name, link_key, and features are NULL if unknown
**
-** Returns TRUE if added OK, else FALSE
+** Returns true if added OK, else false
**
*******************************************************************************/
-extern BOOLEAN BTM_SecAddDevice (BD_ADDR bd_addr, DEV_CLASS dev_class,
- BD_NAME bd_name, UINT8 *features,
- UINT32 trusted_mask[], LINK_KEY link_key,
- UINT8 key_type, tBTM_IO_CAP io_cap, UINT8 pin_length);
+extern bool BTM_SecAddDevice (BD_ADDR bd_addr, DEV_CLASS dev_class,
+ BD_NAME bd_name, uint8_t *features,
+ uint32_t trusted_mask[], LINK_KEY link_key,
+ uint8_t key_type, tBTM_IO_CAP io_cap, uint8_t pin_length);
/*******************************************************************************
**
** Description Free resources associated with the device.
**
-** Returns TRUE if rmoved OK, FALSE if not found
+** Returns true if rmoved OK, false if not found
**
*******************************************************************************/
-extern BOOLEAN BTM_SecDeleteDevice (BD_ADDR bd_addr);
+extern bool BTM_SecDeleteDevice (BD_ADDR bd_addr);
+/*******************************************************************************
+**
+** Function BTM_SecClearSecurityFlags
+**
+** Description Reset the security flags (mark as not-paired) for a given
+** remove device.
+**
+*******************************************************************************/
+extern void BTM_SecClearSecurityFlags (BD_ADDR bd_addr);
/*******************************************************************************
**
** res - result of the operation BTM_SUCCESS if success
** pin_len - length in bytes of the PIN Code
** p_pin - pointer to array with the PIN Code
-** trusted_mask - bitwise OR of trusted services (array of UINT32)
+** trusted_mask - bitwise OR of trusted services (array of uint32_t)
**
** Returns void
**
*******************************************************************************/
-extern void BTM_PINCodeReply (BD_ADDR bd_addr, UINT8 res, UINT8 pin_len,
- UINT8 *p_pin, UINT32 trusted_mask[]);
+extern void BTM_PINCodeReply (BD_ADDR bd_addr, uint8_t res, uint8_t pin_len,
+ uint8_t *p_pin, uint32_t trusted_mask[]);
/*******************************************************************************
** Parameters: bd_addr - Address of the device to bond
** pin_len - length in bytes of the PIN Code
** p_pin - pointer to array with the PIN Code
-** trusted_mask - bitwise OR of trusted services (array of UINT32)
+** trusted_mask - bitwise OR of trusted services (array of uint32_t)
** Returns BTM_CMD_STARTED if successfully initiated, otherwise error
**
*******************************************************************************/
extern tBTM_STATUS BTM_SecBond (BD_ADDR bd_addr,
- UINT8 pin_len, UINT8 *p_pin,
- UINT32 trusted_mask[]);
+ uint8_t pin_len, uint8_t *p_pin,
+ uint32_t trusted_mask[]);
/*******************************************************************************
**
** Parameters: bd_addr - Address of the device to bond
** pin_len - length in bytes of the PIN Code
** p_pin - pointer to array with the PIN Code
-** trusted_mask - bitwise OR of trusted services (array of UINT32)
+** trusted_mask - bitwise OR of trusted services (array of uint32_t)
** transport : Physical transport to use for bonding (BR/EDR or LE)
**
** Returns BTM_CMD_STARTED if successfully initiated, otherwise error
*******************************************************************************/
extern tBTM_STATUS BTM_SecBondByTransport (BD_ADDR bd_addr,
tBT_TRANSPORT transport,
- UINT8 pin_len, UINT8 *p_pin,
- UINT32 trusted_mask[]);
+ uint8_t pin_len, uint8_t *p_pin,
+ uint32_t trusted_mask[]);
/*******************************************************************************
**
** passkey - numeric value in the range of 0 - 999999(0xF423F).
**
*******************************************************************************/
-extern void BTM_PasskeyReqReply(tBTM_STATUS res, BD_ADDR bd_addr, UINT32 passkey);
+extern void BTM_PasskeyReqReply(tBTM_STATUS res, BD_ADDR bd_addr, uint32_t passkey);
/*******************************************************************************
**
** LM
**
*******************************************************************************/
-extern tBTM_STATUS BTM_ReadLocalOobData(void);
+extern void BTM_ReadLocalOobData(void);
/*******************************************************************************
**
** Returns Number of bytes in p_data.
**
*******************************************************************************/
-extern UINT16 BTM_BuildOobData(UINT8 *p_data, UINT16 max_len, BT_OCTET16 c,
- BT_OCTET16 r, UINT8 name_len);
+extern uint16_t BTM_BuildOobData(uint8_t *p_data, uint16_t max_len, BT_OCTET16 c,
+ BT_OCTET16 r, uint8_t name_len);
/*******************************************************************************
**
**
** Parameters: bd_addr - address of the peer
**
-** Returns TRUE if BR/EDR Secure Connections are supported by both local
+** Returns true if BR/EDR Secure Connections are supported by both local
** and the remote device.
-** else FALSE.
+** else false.
**
*******************************************************************************/
-extern BOOLEAN BTM_BothEndsSupportSecureConnections(BD_ADDR bd_addr);
+extern bool BTM_BothEndsSupportSecureConnections(BD_ADDR bd_addr);
/*******************************************************************************
**
**
** Parameters: bd_addr - address of the peer
**
-** Returns TRUE if BR/EDR Secure Connections are supported by the peer,
-** else FALSE.
+** Returns true if BR/EDR Secure Connections are supported by the peer,
+** else false.
**
*******************************************************************************/
-extern BOOLEAN BTM_PeerSupportsSecureConnections(BD_ADDR bd_addr);
+extern bool BTM_PeerSupportsSecureConnections(BD_ADDR bd_addr);
/*******************************************************************************
**
** NULL, if the tag is not found.
**
*******************************************************************************/
-extern UINT8 * BTM_ReadOobData(UINT8 *p_data, UINT8 eir_tag, UINT8 *p_len);
+extern uint8_t * BTM_ReadOobData(uint8_t *p_data, uint8_t eir_tag, uint8_t *p_len);
/*******************************************************************************
**
** BTM_ILLEGAL_VALUE
**
*******************************************************************************/
-extern tBTM_STATUS BTM_PmRegister (UINT8 mask, UINT8 *p_pm_id,
+extern tBTM_STATUS BTM_PmRegister (uint8_t mask, uint8_t *p_pm_id,
tBTM_PM_STATUS_CBACK *p_cb);
** BTM_UNKNOWN_ADDR if bd addr is not active or bad
**
*******************************************************************************/
-extern tBTM_STATUS BTM_SetPowerMode (UINT8 pm_id, BD_ADDR remote_bda,
+extern tBTM_STATUS BTM_SetPowerMode (uint8_t pm_id, BD_ADDR remote_bda,
tBTM_PM_PWR_MD *p_mode);
** BTM_CMD_STORED if the command is stored
**
*******************************************************************************/
-extern tBTM_STATUS BTM_SetSsrParams (BD_ADDR remote_bda, UINT16 max_lat,
- UINT16 min_rmt_to, UINT16 min_loc_to);
+extern tBTM_STATUS BTM_SetSsrParams (BD_ADDR remote_bda, uint16_t max_lat,
+ uint16_t min_rmt_to, uint16_t min_loc_to);
/*******************************************************************************
**
** Returns the handle of the connection, or 0xFFFF if none.
**
*******************************************************************************/
-extern UINT16 BTM_GetHCIConnHandle (BD_ADDR remote_bda, tBT_TRANSPORT transport);
+extern uint16_t BTM_GetHCIConnHandle (const BD_ADDR remote_bda, tBT_TRANSPORT transport);
/*******************************************************************************
**
** Returns pointer of EIR data
**
*******************************************************************************/
-extern UINT8 *BTM_CheckEirData( UINT8 *p_eir, UINT8 type, UINT8 *p_length );
+extern uint8_t *BTM_CheckEirData( uint8_t *p_eir, uint8_t type, uint8_t *p_length );
/*******************************************************************************
**
** Parameters p_eir_uuid - bit map of UUID list
** uuid16 - UUID 16-bit
**
-** Returns TRUE - if found
-** FALSE - if not found
+** Returns true - if found
+** false - if not found
**
*******************************************************************************/
-extern BOOLEAN BTM_HasEirService( UINT32 *p_eir_uuid, UINT16 uuid16 );
+extern bool BTM_HasEirService( uint32_t *p_eir_uuid, uint16_t uuid16 );
/*******************************************************************************
**
**
*******************************************************************************/
extern tBTM_EIR_SEARCH_RESULT BTM_HasInquiryEirService( tBTM_INQ_RESULTS *p_results,
- UINT16 uuid16 );
+ uint16_t uuid16 );
/*******************************************************************************
**
** Returns None
**
*******************************************************************************/
-extern void BTM_AddEirService( UINT32 *p_eir_uuid, UINT16 uuid16 );
+extern void BTM_AddEirService( uint32_t *p_eir_uuid, uint16_t uuid16 );
/*******************************************************************************
**
** Returns None
**
*******************************************************************************/
-extern void BTM_RemoveEirService( UINT32 *p_eir_uuid, UINT16 uuid16 );
+extern void BTM_RemoveEirService( uint32_t *p_eir_uuid, uint16_t uuid16 );
/*******************************************************************************
**
** BTM_EIR_COMPLETE_16BITS_UUID_TYPE, otherwise
**
*******************************************************************************/
-extern UINT8 BTM_GetEirSupportedServices( UINT32 *p_eir_uuid, UINT8 **p,
- UINT8 max_num_uuid16, UINT8 *p_num_uuid16);
+extern uint8_t BTM_GetEirSupportedServices( uint32_t *p_eir_uuid, uint8_t **p,
+ uint8_t max_num_uuid16, uint8_t *p_num_uuid16);
/*******************************************************************************
**
** BTM_EIR_MORE_128BITS_UUID_TYPE
**
*******************************************************************************/
-extern UINT8 BTM_GetEirUuidList( UINT8 *p_eir, UINT8 uuid_size, UINT8 *p_num_uuid,
- UINT8 *p_uuid_list, UINT8 max_num_uuid);
+extern uint8_t BTM_GetEirUuidList( uint8_t *p_eir, uint8_t uuid_size, uint8_t *p_num_uuid,
+ uint8_t *p_uuid_list, uint8_t max_num_uuid);
/*****************************************************************************
** SCO OVER HCI
extern tBTM_STATUS BTM_ConfigScoPath (tBTM_SCO_ROUTE_TYPE path,
tBTM_SCO_DATA_CB *p_sco_data_cb,
tBTM_SCO_PCM_PARAM *p_pcm_param,
- BOOLEAN err_data_rpt);
+ bool err_data_rpt);
/*******************************************************************************
**
**
**
*******************************************************************************/
-extern tBTM_STATUS BTM_WriteScoData (UINT16 sco_inx, BT_HDR *p_buf);
+extern tBTM_STATUS BTM_WriteScoData (uint16_t sco_inx, BT_HDR *p_buf);
/*******************************************************************************
**
** Returns void
**
*******************************************************************************/
-extern void BTM_SetARCMode (UINT8 iface, UINT8 arc_mode, tBTM_VSC_CMPL_CB *p_arc_cb);
+extern void BTM_SetARCMode (uint8_t iface, uint8_t arc_mode, tBTM_VSC_CMPL_CB *p_arc_cb);
/*******************************************************************************
** Returns void
**
*******************************************************************************/
-extern void BTM_PCM2Setup_Write (BOOLEAN clk_master, tBTM_VSC_CMPL_CB *p_arc_cb);
+extern void BTM_PCM2Setup_Write (bool clk_master, tBTM_VSC_CMPL_CB *p_arc_cb);
/*******************************************************************************
OSDN Git Service
