#
# The <format-string> should be a sprintf()-compatible format string.
+# cpu.c
+breakpoint_insert(int cpu_index, uint64_t pc, int flags) "cpu=%d pc=0x%" PRIx64 " flags=0x%x"
+breakpoint_remove(int cpu_index, uint64_t pc, int flags) "cpu=%d pc=0x%" PRIx64 " flags=0x%x"
+breakpoint_singlestep(int cpu_index, int enabled) "cpu=%d enable=%d"
+
# dma-helpers.c
dma_blk_io(void *dbs, void *bs, int64_t offset, bool to_dev) "dbs=%p bs=%p offset=%" PRId64 " to_dev=%d"
dma_aio_cancel(void *dbs) "dbs=%p"
find_ram_offset_loop(uint64_t size, uint64_t candidate, uint64_t offset, uint64_t next, uint64_t mingap) "trying size: 0x%" PRIx64 " @ 0x%" PRIx64 ", offset: 0x%" PRIx64" next: 0x%" PRIx64 " mingap: 0x%" PRIx64
ram_block_discard_range(const char *rbname, void *hva, size_t length, bool need_madvise, bool need_fallocate, int ret) "%s@%p + 0x%zx: madvise: %d fallocate: %d ret: %d"
-# accel/tcg/cputlb.c
-memory_notdirty_write_access(uint64_t vaddr, uint64_t ram_addr, unsigned size) "0x%" PRIx64 " ram_addr 0x%" PRIx64 " size %u"
-memory_notdirty_set_dirty(uint64_t vaddr) "0x%" PRIx64
-
-# gdbstub.c
-gdbstub_op_start(const char *device) "Starting gdbstub using device %s"
-gdbstub_op_exiting(uint8_t code) "notifying exit with code=0x%02x"
-gdbstub_op_continue(void) "Continuing all CPUs"
-gdbstub_op_continue_cpu(int cpu_index) "Continuing CPU %d"
-gdbstub_op_stepping(int cpu_index) "Stepping CPU %d"
-gdbstub_op_extra_info(const char *info) "Thread extra info: %s"
-gdbstub_hit_watchpoint(const char *type, int cpu_gdb_index, uint64_t vaddr) "Watchpoint hit, type=\"%s\" cpu=%d, vaddr=0x%" PRIx64 ""
-gdbstub_hit_internal_error(void) "RUN_STATE_INTERNAL_ERROR"
-gdbstub_hit_break(void) "RUN_STATE_DEBUG"
-gdbstub_hit_paused(void) "RUN_STATE_PAUSED"
-gdbstub_hit_shutdown(void) "RUN_STATE_SHUTDOWN"
-gdbstub_hit_io_error(void) "RUN_STATE_IO_ERROR"
-gdbstub_hit_watchdog(void) "RUN_STATE_WATCHDOG"
-gdbstub_hit_unknown(int state) "Unknown run state=0x%x"
-gdbstub_io_reply(const char *message) "Sent: %s"
-gdbstub_io_binaryreply(size_t ofs, const char *line) "0x%04zx: %s"
-gdbstub_io_command(const char *command) "Received: %s"
-gdbstub_io_got_ack(void) "Got ACK"
-gdbstub_io_got_unexpected(uint8_t ch) "Got 0x%02x when expecting ACK/NACK"
-gdbstub_err_got_nack(void) "Got NACK, retransmitting"
-gdbstub_err_garbage(uint8_t ch) "received garbage between packets: 0x%02x"
-gdbstub_err_overrun(void) "command buffer overrun, dropping command"
-gdbstub_err_invalid_repeat(uint8_t ch) "got invalid RLE count: 0x%02x"
-gdbstub_err_invalid_rle(void) "got invalid RLE sequence"
-gdbstub_err_checksum_invalid(uint8_t ch) "got invalid command checksum digit: 0x%02x"
-gdbstub_err_checksum_incorrect(uint8_t expected, uint8_t got) "got command packet with incorrect checksum, expected=0x%02x, received=0x%02x"
-
# job.c
job_state_transition(void *job, int ret, const char *legal, const char *s0, const char *s1) "job %p (ret: %d) attempting %s transition (%s-->%s)"
job_apply_verb(void *job, const char *state, const char *verb, const char *legal) "job %p in state %s; applying verb %s (%s)"
qmp_job_complete(void *job) "job %p"
qmp_job_finalize(void *job) "job %p"
qmp_job_dismiss(void *job) "job %p"
-
-
-### Guest events, keep at bottom
-
-
-## vCPU
-
-# trace/control-target.c
-
-# Hot-plug a new virtual (guest) CPU
-#
-# Mode: user, softmmu
-# Targets: all
-vcpu guest_cpu_enter(void)
-
-# trace/control.c
-
-# Hot-unplug a virtual (guest) CPU
-#
-# Mode: user, softmmu
-# Targets: all
-vcpu guest_cpu_exit(void)
-
-# hw/core/cpu.c
-
-# Reset the state of a virtual (guest) CPU
-#
-# Mode: user, softmmu
-# Targets: all
-vcpu guest_cpu_reset(void)
-
-# tcg/tcg-op.c
-
-# @vaddr: Access' virtual address.
-# @info : Access' information (see below).
-#
-# Start virtual memory access (before any potential access violation).
-#
-# Does not include memory accesses performed by devices.
-#
-# Access information can be parsed as:
-#
-# struct mem_info {
-# uint8_t size_shift : 4; /* interpreted as "1 << size_shift" bytes */
-# bool sign_extend: 1; /* sign-extended */
-# uint8_t endianness : 1; /* 0: little, 1: big */
-# bool store : 1; /* whether it is a store operation */
-# pad : 1;
-# uint8_t mmuidx : 4; /* mmuidx (softmmu only) */
-# };
-#
-# Mode: user, softmmu
-# Targets: TCG(all)
-vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
-
-# include/user/syscall-trace.h
-
-# @num: System call number.
-# @arg*: System call argument value.
-#
-# Start executing a guest system call in syscall emulation mode.
-#
-# Mode: user
-# Targets: TCG(all)
-vcpu guest_user_syscall(uint64_t num, uint64_t arg1, uint64_t arg2, uint64_t arg3, uint64_t arg4, uint64_t arg5, uint64_t arg6, uint64_t arg7, uint64_t arg8) "num=0x%016"PRIx64" arg1=0x%016"PRIx64" arg2=0x%016"PRIx64" arg3=0x%016"PRIx64" arg4=0x%016"PRIx64" arg5=0x%016"PRIx64" arg6=0x%016"PRIx64" arg7=0x%016"PRIx64" arg8=0x%016"PRIx64
-
-# @num: System call number.
-# @ret: System call result value.
-#
-# Finish executing a guest system call in syscall emulation mode.
-#
-# Mode: user
-# Targets: TCG(all)
-vcpu guest_user_syscall_ret(uint64_t num, uint64_t ret) "num=0x%016"PRIx64" ret=0x%016"PRIx64
OSDN Git Service
