+++ /dev/null
-# makefile.vc -- -*- Makefile -*-
-#
-# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
-#
-# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to
-# make it suitable as a general package makefile. Look for the word EDIT
-# which marks sections that may need modification. As a minumum you will
-# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
-# relevant to your package.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# Copyright (c) 1995-1996 Sun Microsystems, Inc.
-# Copyright (c) 1998-2000 Ajuba Solutions.
-# Copyright (c) 2001 ActiveState Corporation.
-# Copyright (c) 2001-2002 David Gravereaux.
-# Copyright (c) 2003 Pat Thoyts
-#
-#-------------------------------------------------------------------------
-# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $
-#-------------------------------------------------------------------------
-
-!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
-MSG = ^
-You will need to run vcvars32.bat from Developer Studio, first, to setup^
-the environment. Jump to this line to read the new instructions.
-!error $(MSG)
-!endif
-
-#------------------------------------------------------------------------------
-# HOW TO USE this makefile:
-#
-# 1) It is now necessary to have %MSVCDir% set in the environment. This is
-# used as a check to see if vcvars32.bat had been run prior to running
-# nmake or during the installation of Microsoft Visual C++, MSVCDir had
-# been set globally and the PATH adjusted. Either way is valid.
-#
-# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
-# directory to setup the proper environment, if needed, for your current
-# setup. This is a needed bootstrap requirement and allows the swapping of
-# different environments to be easier.
-#
-# 2) To use the Platform SDK (not expressly needed), run setenv.bat after
-# vcvars32.bat according to the instructions for it. This can also turn on
-# the 64-bit compiler, if your SDK has it.
-#
-# 3) Targets are:
-# all -- Builds everything.
-# <project> -- Builds the project (eg: nmake sample)
-# test -- Builds and runs the test suite.
-# install -- Installs the built binaries and libraries to $(INSTALLDIR)
-# in an appropriate subdirectory.
-# clean/realclean/distclean -- varying levels of cleaning.
-#
-# 4) Macros usable on the commandline:
-# INSTALLDIR=<path>
-# Sets where to install Tcl from the built binaries.
-# C:\Progra~1\Tcl is assumed when not specified.
-#
-# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
-# Sets special options for the core. The default is for none.
-# Any combination of the above may be used (comma separated).
-# 'none' will over-ride everything to nothing.
-#
-# static = Builds a static library of the core instead of a
-# dll. The shell will be static (and large), as well.
-# msvcrt = Effects the static option only to switch it from
-# using libcmt(d) as the C runtime [by default] to
-# msvcrt(d). This is useful for static embedding
-# support.
-# staticpkg = Effects the static option only to switch
-# tclshXX.exe to have the dde and reg extension linked
-# inside it.
-# threads = Turns on full multithreading support.
-# thrdalloc = Use the thread allocator (shared global free pool).
-# symbols = Adds symbols for step debugging.
-# profile = Adds profiling hooks. Map file is assumed.
-# loimpact = Adds a flag for how NT treats the heap to keep memory
-# in use, low. This is said to impact alloc performance.
-#
-# STATS=memdbg,compdbg,none
-# Sets optional memory and bytecode compiler debugging code added
-# to the core. The default is for none. Any combination of the
-# above may be used (comma separated). 'none' will over-ride
-# everything to nothing.
-#
-# memdbg = Enables the debugging memory allocator.
-# compdbg = Enables byte compilation logging.
-#
-# MACHINE=(IX86|IA64|ALPHA)
-# Set the machine type used for the compiler, linker, and
-# resource compiler. This hook is needed to tell the tools
-# when alternate platforms are requested. IX86 is the default
-# when not specified.
-#
-# TMP_DIR=<path>
-# OUT_DIR=<path>
-# Hooks to allow the intermediate and output directories to be
-# changed. $(OUT_DIR) is assumed to be
-# $(BINROOT)\(Release|Debug) based on if symbols are requested.
-# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
-#
-# TESTPAT=<file>
-# Reads the tests requested to be run from this file.
-#
-# CFG_ENCODING=encoding
-# name of encoding for configuration information. Defaults
-# to cp1252
-#
-# 5) Examples:
-#
-# Basic syntax of calling nmake looks like this:
-# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
-#
-# Standard (no frills)
-# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
-# Setting environment for using Microsoft Visual C++ tools.
-# c:\tcl_src\win\>nmake -f makefile.vc all
-# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
-#
-# Building for Win64
-# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
-# Setting environment for using Microsoft Visual C++ tools.
-# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
-# Targeting Windows pre64 RETAIL
-# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
-#
-#------------------------------------------------------------------------------
-#==============================================================================
-###############################################################################
-#------------------------------------------------------------------------------
-
-!if !exist("makefile.vc")
-MSG = ^
-You must run this makefile only from the directory it is in.^
-Please `cd` to its location first.
-!error $(MSG)
-!endif
-
-#-------------------------------------------------------------------------
-# Project specific information (EDIT)
-#
-# You should edit this with the name and version of your project. This
-# information is used to generate the name of the package library and
-# it's install location.
-#
-# For example, the sample extension is going to build sample04.dll and
-# would install it into $(INSTALLDIR)\lib\sample04
-#
-# You need to specify the object files that need to be linked into your
-# binary here.
-#
-#-------------------------------------------------------------------------
-
-PROJECT = sqlite3
-!include "rules.vc"
-
-# nmakehelp -V <file> <tag> will search the file for tag, skips until a
-# number and returns all character until a character not in [0-9.ab]
-# is read.
-
-!if [echo REM = This file is generated from Makefile.vc > versions.vc]
-!endif
-# get project version from row "AC_INIT([sqlite], [3.7.14])"
-!if [echo DOTVERSION = \>> versions.vc] \
- && [nmakehlp -V ..\configure.ac AC_INIT >> versions.vc]
-!endif
-!include "versions.vc"
-
-VERSION = $(DOTVERSION:.=)
-STUBPREFIX = $(PROJECT)stub
-
-DLLOBJS = \
- $(TMP_DIR)\tclsqlite3.obj
-
-#-------------------------------------------------------------------------
-# Target names and paths ( shouldn't need changing )
-#-------------------------------------------------------------------------
-
-BINROOT = .
-ROOT = ..
-
-PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
-PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
-PRJLIB = $(OUT_DIR)\$(PRJLIBNAME)
-
-PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
-PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME)
-
-### Make sure we use backslash only.
-PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
-LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-INCLUDE_INSTALL_DIR = $(_TCLDIR)\include
-
-### The following paths CANNOT have spaces in them.
-GENERICDIR = $(ROOT)\generic
-WINDIR = $(ROOT)\win
-LIBDIR = $(ROOT)\library
-DOCDIR = $(ROOT)\doc
-TOOLSDIR = $(ROOT)\tools
-COMPATDIR = $(ROOT)\compat
-
-#---------------------------------------------------------------------
-# Compile flags
-#---------------------------------------------------------------------
-
-!if !$(DEBUG)
-!if $(OPTIMIZING)
-### This cranks the optimization level to maximize speed
-cdebug = -O2 -Op -Gs
-!else
-cdebug =
-!endif
-!else if "$(MACHINE)" == "IA64"
-### Warnings are too many, can't support warnings into errors.
-cdebug = -Z7 -Od -GZ
-!else
-cdebug = -Z7 -WX -Od -GZ
-!endif
-
-### Declarations common to all compiler options
-cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\
-
-!if $(MSVCRT)
-!if $(DEBUG)
-crt = -MDd
-!else
-crt = -MD
-!endif
-!else
-!if $(DEBUG)
-crt = -MTd
-!else
-crt = -MT
-!endif
-!endif
-
-INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \
- -I"$(ROOT)\.."
-BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) \
- -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \
- -DSQLITE_ENABLE_FTS4=1 -DSQLITE_OMIT_DEPRECATED=1
-CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS4=1
-TCL_CFLAGS = -DBUILD_sqlite -DUSE_TCL_STUBS \
- -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \
- $(OPTDEFINES)
-
-#---------------------------------------------------------------------
-# Link flags
-#---------------------------------------------------------------------
-
-!if $(DEBUG)
-ldebug = -debug -debugtype:cv
-!else
-ldebug = -release -opt:ref -opt:icf,3
-!endif
-
-### Declarations common to all linker options
-lflags = -nologo -machine:$(MACHINE) $(ldebug)
-
-!if $(PROFILE)
-lflags = $(lflags) -profile
-!endif
-
-!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
-### Align sections for PE size savings.
-lflags = $(lflags) -opt:nowin98
-!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
-### Align sections for speed in loading by choosing the virtual page size.
-lflags = $(lflags) -align:4096
-!endif
-
-!if $(LOIMPACT)
-lflags = $(lflags) -ws:aggressive
-!endif
-
-dlllflags = $(lflags) -dll
-conlflags = $(lflags) -subsystem:console
-guilflags = $(lflags) -subsystem:windows
-!if !$(STATIC_BUILD)
-baselibs = $(TCLSTUBLIB)
-!if defined(TKSTUBLIB)
-baselibs = $(baselibs) $(TKSTUBLIB)
-!endif
-!endif
-
-# Avoid 'unresolved external symbol __security_cookie' errors.
-# c.f. http://support.microsoft.com/?id=894573
-!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
-!if $(VCVERSION) > 1399 && $(VCVERSION) < 1500
-baselibs = $(baselibs) bufferoverflowU.lib
-!endif
-!endif
-
-baselibs = $(baselibs) user32.lib gdi32.lib
-
-#---------------------------------------------------------------------
-# TclTest flags
-#---------------------------------------------------------------------
-
-!IF "$(TESTPAT)" != ""
-TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
-!ENDIF
-
-#---------------------------------------------------------------------
-# Project specific targets (EDIT)
-#---------------------------------------------------------------------
-
-all: setup $(PROJECT)
-$(PROJECT): setup $(PRJLIB)
-install: install-binaries install-libraries install-docs
-
-# Tests need to ensure we load the right dll file we
-# have to handle the output differently on Win9x.
-#
-!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
-test: setup $(PROJECT)
- set TCL_LIBRARY=$(ROOT)/library
- $(TCLSH) <<
-load $(PRJLIB:\=/) $(PROJECT)
-cd "$(ROOT)/tests"
-set argv "$(TESTFLAGS)"
-source all.tcl
-<<
-!else
-test: setup $(PROJECT)
- echo Please wait while the test results are collected
- set TCL_LIBRARY=$(ROOT)/library
- $(TCLSH) << >tests.log
-load $(PRJLIB:\=/)
-cd "$(ROOT)/tests"
-set argv "$(TESTFLAGS)"
-source all.tcl
-<<
- type tests.log | more
-!endif
-
-setup:
- @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
- @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
-
-$(PRJLIB): $(DLLOBJS)
- $(link32) $(dlllflags) -out:$@ $(baselibs) @<<
-$**
-<<
- -@del $*.exp
-
-$(PRJSTUBLIB): $(PRJSTUBOBJS)
- $(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
-
-#---------------------------------------------------------------------
-# Implicit rules
-#---------------------------------------------------------------------
-
-{$(WINDIR)}.c{$(TMP_DIR)}.obj::
- $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
- $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
- $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(WINDIR)}.rc{$(TMP_DIR)}.res:
- $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
-!if $(DEBUG)
- -d DEBUG \
-!endif
-!if $(TCL_THREADS)
- -d TCL_THREADS \
-!endif
-!if $(STATIC_BUILD)
- -d STATIC_BUILD \
-!endif
- $<
-
-.SUFFIXES:
-.SUFFIXES:.c .rc
-
-#---------------------------------------------------------------------
-# Installation. (EDIT)
-#
-# You may need to modify this section to reflect the final distribution
-# of your files and possibly to generate documentation.
-#
-#---------------------------------------------------------------------
-
-install-binaries:
- @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
- @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
- @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
-
-install-libraries:
- @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
- @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
- @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
- @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl"
-package ifneeded $(PROJECT) $(DOTVERSION) \
- [list load [file join $$dir $(PRJLIBNAME)] sqlite3]
-<<
-
-install-docs:
- @echo Installing documentation files to '$(DOC_INSTALL_DIR)'
- @if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
-
-#---------------------------------------------------------------------
-# Clean up
-#---------------------------------------------------------------------
-
-clean:
- @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
- @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
-
-realclean: clean
- @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
-
-distclean: realclean
- @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
- @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
OSDN Git Service
