+++ /dev/null
-#------------------------------------------------------------- -*- makefile -*-
-# makefile.vc --
-#
-# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
-#
-# This makefile is based upon the Tcl 8.6 Makefile.vc and modified to
-# make it suitable as a general package makefile. Look for the word EDIT
-# which marks sections that may need modification. As a minumum you will
-# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
-# relevant to your package.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# Copyright (c) 1995-1996 Sun Microsystems, Inc.
-# Copyright (c) 1998-2000 Ajuba Solutions.
-# Copyright (c) 2001-2005 ActiveState Corporation.
-# Copyright (c) 2001-2004 David Gravereaux.
-# Copyright (c) 2003-2008 Pat Thoyts.
-#------------------------------------------------------------------------------
-
-# Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or
-# VCINSTALLDIR) or with the MS Platform SDK (MSSDK or WindowsSDKDir)
-!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
-MSG = ^
-You need to run vcvars32.bat from Developer Studio or setenv.bat from the^
-Platform SDK first to setup the environment. Jump to this line to read^
-the build instructions.
-!error $(MSG)
-!endif
-
-#------------------------------------------------------------------------------
-# HOW TO USE this makefile:
-#
-# 1) It is now necessary to have MSVCDir, MSDevDir or MSSDK set in the
-# environment. This is used as a check to see if vcvars32.bat had been
-# run prior to running nmake or during the installation of Microsoft
-# Visual C++, MSVCDir had been set globally and the PATH adjusted.
-# Either way is valid.
-#
-# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
-# directory to setup the proper environment, if needed, for your
-# current setup. This is a needed bootstrap requirement and allows the
-# swapping of different environments to be easier.
-#
-# 2) To use the Platform SDK (not expressly needed), run setenv.bat after
-# vcvars32.bat according to the instructions for it. This can also
-# turn on the 64-bit compiler, if your SDK has it.
-#
-# 3) Targets are:
-# all -- Builds everything.
-# <project> -- Builds the project (eg: nmake sample)
-# test -- Builds and runs the test suite.
-# install -- Installs the built binaries and libraries to $(INSTALLDIR)
-# in an appropriate subdirectory.
-# clean/realclean/distclean -- varying levels of cleaning.
-#
-# 4) Macros usable on the commandline:
-# INSTALLDIR=<path>
-# Sets where to install Tcl from the built binaries.
-# C:\Progra~1\Tcl is assumed when not specified.
-#
-# OPTS=loimpact,msvcrt,nothreads,pdbs,profile,static,symbols,unchecked,none
-# Sets special options for the core. The default is for none.
-# Any combination of the above may be used (comma separated).
-# 'none' will over-ride everything to nothing.
-#
-# loimpact = Adds a flag for how NT treats the heap to keep memory
-# in use, low. This is said to impact alloc performance.
-# msvcrt = Affects the static option only to switch it from
-# using libcmt(d) as the C runtime [by default] to
-# msvcrt(d). This is useful for static embedding
-# support.
-# nothreads = Turns off multithreading support (not recommended)
-# static = Builds a static library of the core instead of a
-# dll. The shell will be static (and large), as well.
-# pdbs = Build detached symbols for release builds.
-# profile = Adds profiling hooks. Map file is assumed.
-# symbols = Debug build. Links to the debug C runtime, disables
-# optimizations and creates pdb symbols files.
-# unchecked = Allows a symbols build to not use the debug
-# enabled runtime (msvcrt.dll not msvcrtd.dll
-# or libcmt.lib not libcmtd.lib).
-#
-# STATS=memdbg,compdbg,none
-# Sets optional memory and bytecode compiler debugging code added
-# to the core. The default is for none. Any combination of the
-# above may be used (comma separated). 'none' will over-ride
-# everything to nothing.
-#
-# memdbg = Enables the debugging memory allocator.
-# compdbg = Enables byte compilation logging.
-#
-# CHECKS=64bit,fullwarn,nodep,none
-# Sets special macros for checking compatability.
-#
-# 64bit = Enable 64bit portability warnings (if available)
-# fullwarn = Builds with full compiler and link warnings enabled.
-# Very verbose.
-# nodep = Turns off compatability macros to ensure Tk isn't
-# being built with deprecated functions.
-#
-# MACHINE=(ALPHA|AMD64|IA64|IX86)
-# Set the machine type used for the compiler, linker, and
-# resource compiler. This hook is needed to tell the tools
-# when alternate platforms are requested. IX86 is the default
-# when not specified. If the CPU environment variable has been
-# set (ie: recent Platform SDK) then MACHINE is set from CPU.
-#
-# TMP_DIR=<path>
-# OUT_DIR=<path>
-# Hooks to allow the intermediate and output directories to be
-# changed. $(OUT_DIR) is assumed to be
-# $(BINROOT)\(Release|Debug) based on if symbols are requested.
-# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
-#
-# TESTPAT=<file>
-# Reads the tests requested to be run from this file.
-#
-# 5) Examples:
-#
-# Basic syntax of calling nmake looks like this:
-# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
-#
-# Standard (no frills)
-# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
-# Setting environment for using Microsoft Visual C++ tools.
-# c:\tcl_src\win\>nmake -f makefile.vc all
-# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
-#
-# Building for Win64
-# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
-# Setting environment for using Microsoft Visual C++ tools.
-# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
-# Targeting Windows pre64 RETAIL
-# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
-#
-#------------------------------------------------------------------------------
-#==============================================================================
-#------------------------------------------------------------------------------
-
-!if !exist("makefile.vc")
-MSG = ^
-You must run this makefile only from the directory it is in.^
-Please `cd` to its location first.
-!error $(MSG)
-!endif
-
-#-------------------------------------------------------------------------
-# Project specific information (EDIT)
-#
-# You should edit this with the name and version of your project. This
-# information is used to generate the name of the package library and
-# it's install location.
-#
-# For example, the sample extension is going to build sample05.dll and
-# would install it into $(INSTALLDIR)\lib\sample05
-#
-# You need to specify the object files that need to be linked into your
-# binary here.
-#
-#-------------------------------------------------------------------------
-
-PROJECT = tdbcpostgres
-
-# Uncomment the following line if this is a Tk extension.
-#PROJECT_REQUIRES_TK=1
-!include "rules.vc"
-
-# nmakehelp -V <file> <tag> will search the file for tag, skips until a
-# number and returns all character until a character not in [0-9.ab]
-# is read.
-
-!if [echo REM = This file is generated from Makefile.vc > versions.vc]
-!endif
-# get project version from row AC_INIT([tdbcpostgres], ...)
-!if [echo DOTVERSION = \>> versions.vc] \
- && [nmakehlp -V ..\configure.in AC_INIT >> versions.vc]
-!endif
-!if [echo TCL_VERSION_REQ = \>> versions.vc] \
- && [nmakehlp -V ..\configure.in TCL_VERSION_REQ >> versions.vc]
-!endif
-!include "versions.vc"
-
-VERSION = $(DOTVERSION:.=)
-STUBPREFIX = $(PROJECT)stub
-
-DLLOBJS = \
- $(TMP_DIR)\tdbcpostgres.obj \
- $(TMP_DIR)\pqStubInit.obj
-
-
-PRJSTUBOBJS = \
- $(TMP_DIR)\pqStubInit.obj
-
-PRJHEADERS = \
- $(GENERICDIR)\fakepq.h \
- $(GENERICDIR)\pqStubs.h
-
-
-#-------------------------------------------------------------------------
-# Target names and paths ( shouldn't need changing )
-#-------------------------------------------------------------------------
-
-BINROOT = $(MAKEDIR)
-ROOT = $(MAKEDIR)\..
-
-PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
-PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
-PRJLIB = $(OUT_DIR)\$(PRJLIBNAME)
-
-PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
-PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME)
-
-### Make sure we use backslash only.
-PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
-LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-INCLUDE_INSTALL_DIR = $(_TCLDIR)\include
-
-### The following paths CANNOT have spaces in them.
-GENERICDIR = $(ROOT)\generic
-WINDIR = $(ROOT)\win
-LIBDIR = $(ROOT)\library
-DOCDIR = $(ROOT)\doc
-TOOLSDIR = $(ROOT)\tools
-COMPATDIR = $(ROOT)\compat
-
-### tdbc
-TDBC_DOTVERSION = $(DOTVERSION)
-TDBC_VERSION = $(TDBC_DOTVERSION:.=)
-# tdbc source folder is "../tdbc" in source distribution and
-# "../tdbc1.0.0" in tcl8.6.0 bundeled distribution
-TDBC_DIR = $(ROOT)\..\tdbc
-!if !exist($(TDBC_DIR))
-TDBC_DIR = $(ROOT)\..\tdbc$(TDBC_DOTVERSION)
-!endif
-TDBC_GENERIC_DIR = $(TDBC_DIR)\generic
-### tdbc stub lib
-TDBCSTUBLIBNAME = tdbcstub$(TDBC_VERSION).lib
-TDBCSTUBLIB = "$(_TCLDIR)\lib\$(TDBCSTUBLIBNAME)"
-!if !exist($(TDBCSTUBLIB))
-TDBCSTUBLIB = $(TDBC_DIR)\win\$(BUILDDIRTOP)\$(TDBCSTUBLIBNAME)
-!endif
-TDBC_LIB_FILE = tdbc$(TDBC_VERSION).dll
-TDBC_BIN_DIR = $(TDBC_DIR)/win/$(BUILDDIRTOP)
-
-#---------------------------------------------------------------------
-# Compile flags
-#---------------------------------------------------------------------
-
-!if !$(DEBUG)
-!if $(OPTIMIZING)
-### This cranks the optimization level to maximize speed
-cdebug = $(OPTIMIZATIONS)
-!else
-cdebug =
-!endif
-!else if "$(MACHINE)" == "IA64"
-### Warnings are too many, can't support warnings into errors.
-cdebug = -Zi -Od $(DEBUGFLAGS)
-!else
-cdebug = -Zi -WX $(DEBUGFLAGS)
-!endif
-
-### Declarations common to all compiler options
-cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE
-cflags = -nologo -c $(COMPILERFLAGS) $(cwarn) -Fp$(TMP_DIR)^\
-
-!if $(MSVCRT)
-!if $(DEBUG) && !$(UNCHECKED)
-crt = -MDd
-!else
-crt = -MD
-!endif
-!else
-!if $(DEBUG) && !$(UNCHECKED)
-crt = -MTd
-!else
-crt = -MT
-!endif
-!endif
-
-cflags = $(cflags) -DMODULE_SCOPE=extern
-
-!if !$(STATIC_BUILD)
-cflags = $(cflags) -DUSE_TCL_STUBS
-!if defined(TKSTUBLIB)
-cflags = $(cflags) -DUSE_TK_STUBS
-!endif
-!endif
-
-INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" -I"$(TDBC_GENERIC_DIR)"
-BASE_CFLAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES)
-CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE
-TCL_CFLAGS = -DPACKAGE_NAME="\"$(PROJECT)\"" \
- -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \
- -DBUILD_$(PROJECT) \
- $(BASE_CFLAGS) $(OPTDEFINES) \
- -Dinline=__inline
-
-### Stubs files should not be compiled with -GL
-STUB_CFLAGS = $(cflags) $(cdebug:-GL=) #$(TK_DEFINES)
-
-#---------------------------------------------------------------------
-# Link flags
-#---------------------------------------------------------------------
-
-!if $(DEBUG)
-ldebug = -debug
-!if $(MSVCRT)
-ldebug = $(ldebug) -nodefaultlib:msvcrt
-!endif
-!else
-ldebug = -release -opt:ref -opt:icf,3
-!endif
-
-### Declarations common to all linker options
-lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug)
-
-!if $(PROFILE)
-lflags = $(lflags) -profile
-!endif
-
-!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
-### Align sections for PE size savings.
-lflags = $(lflags) -opt:nowin98
-!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
-### Align sections for speed in loading by choosing the virtual page size.
-lflags = $(lflags) -align:4096
-!endif
-
-!if $(LOIMPACT)
-lflags = $(lflags) -ws:aggressive
-!endif
-
-dlllflags = $(lflags) -dll
-conlflags = $(lflags) -subsystem:console
-guilflags = $(lflags) -subsystem:windows
-!if !$(STATIC_BUILD)
-baselibs = $(TCLSTUBLIB) $(TDBCSTUBLIB)
-!if defined(TKSTUBLIB)
-baselibs = $(baselibs) $(TKSTUBLIB)
-!endif
-!endif
-
-# Avoid 'unresolved external symbol __security_cookie' errors.
-# c.f. http://support.microsoft.com/?id=894573
-!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
-!if $(VCVERSION) > 1399 && $(VCVERSION) < 1500
-baselibs = $(baselibs) bufferoverflowU.lib
-!endif
-!endif
-
-#---------------------------------------------------------------------
-# TclTest flags
-#---------------------------------------------------------------------
-
-!if "$(TESTPAT)" != ""
-TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
-!endif
-
-#---------------------------------------------------------------------
-# Project specific targets (EDIT)
-#---------------------------------------------------------------------
-
-all: setup $(PROJECT)
-$(PROJECT): setup pkgIndex $(PRJLIB)
-install: install-binaries install-libraries install-docs
-pkgIndex: setup $(OUT_DIR)\pkgIndex.tcl
-
-!if !$(STATIC_BUILD)
-$(PROJECT): $(PRJSTUBLIB)
-!endif
-
-test: setup $(PROJECT)
- @set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
- @set TCLLIBPATH=$(OUT_DIR_PATH:\=/)
- @set TDBC_LIBRARY=$(LIBDIR:\=/)
- @$(CPY) $(LIBDIR)\*.tcl $(OUT_DIR)
-!if $(TCLINSTALL)
- @set PATH=$(_TCLDIR)\bin;$(PATH)
- $(DEBUGGER) $(TCLSH) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS)
-!else
- @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
- $(DEBUGGER) $(TCLSH) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) \
- -load "package ifneeded tdbc::postgres $(DOTVERSION) \
- {source {$(LIBDIR:\=/)/tdbcpostgres.tcl};load {$(PRJLIB:\=/)} $(PROJECT)};\
- package ifneeded tdbc $(TDBC_DOTVERSION) \
- {source {$(TDBC_BIN_DIR:\=/)/tdbc.tcl};load {$(TDBC_BIN_DIR:\=/)/$(TDBC_LIB_FILE)} tdbc}"
-!endif
-
-shell: setup $(PROJECT)
- @set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
- @set TDBC_LIBRARY=$(LIBDIR:\=/)
-!if $(TCLINSTALL)
- @set PATH=$(_TCLDIR)\bin;$(PATH)
-!else
- @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
-!endif
- $(DEBUGGER) $(TCLSH) $(SCRIPT)
-
-setup:
- @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
- @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
-
-# See <tcl>/win/coffbase.txt for extension base addresses.
-$(PRJLIB): $(DLLOBJS)
- $(link32) $(dlllflags) -base:@$(COFFBASE),tdbc -out:$@ $(baselibs) @<<
-$**
-<<
- $(_VC_MANIFEST_EMBED_DLL)
- -@del $*.exp
-
-$(PRJSTUBLIB): $(PRJSTUBOBJS)
- $(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
-
-
-#---------------------------------------------------------------------
-# Implicit rules
-#---------------------------------------------------------------------
-
-{$(WINDIR)}.c{$(TMP_DIR)}.obj::
- $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
- $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
- $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(WINDIR)}.rc{$(TMP_DIR)}.res:
- $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
- -DCOMMAVERSION=$(DOTVERSION:.=,),0 \
- -DDOTVERSION=\"$(DOTVERSION)\" \
- -DVERSION=\"$(VERSION)$(SUFX)\" \
-!if $(DEBUG)
- -d DEBUG \
-!endif
-!if $(TCL_THREADS)
- -d TCL_THREADS \
-!endif
-!if $(STATIC_BUILD)
- -d STATIC_BUILD \
-!endif
- $<
-
-.SUFFIXES:
-.SUFFIXES:.c .rc
-
-#-------------------------------------------------------------------------
-# Explicit dependency rules
-#
-#-------------------------------------------------------------------------
-.PHONY: $(OUT_DIR)\pkgIndex.tcl
-
-$(OUT_DIR)\pkgIndex.tcl: $(ROOT)\pkgIndex.tcl.in
- @nmakehlp -s << $** > $@
-@PACKAGE_NAME@ $(PROJECT)
-@PACKAGE_VERSION@ $(DOTVERSION)
-@TCL_VERSION_REQ@ $(TCL_VERSION_REQ)
-@PKG_LIB_FILE@ $(PRJLIBNAME)
-<<
-
-$(TMP_DIR)\pqStubInit.obj : $(GENERICDIR)\pqStubInit.c
- $(cc32) $(STUB_CFLAGS) $(TCL_INCLUDES) -Zl -DSTATIC_BUILD -Fo$@ $?
-
-#---------------------------------------------------------------------
-# Installation. (EDIT)
-#
-# You may need to modify this section to reflect the final distribution
-# of your files and possibly to generate documentation.
-#
-#---------------------------------------------------------------------
-
-install-binaries:
- @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
- @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
- @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
-
-install-libraries: $(OUT_DIR)\pkgIndex.tcl
- @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
- @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
- @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
- @$(CPY) $(OUT_DIR)\pkgIndex.tcl "$(SCRIPT_INSTALL_DIR)"
-
-install-docs:
- @echo Installing documentation files to '$(DOC_INSTALL_DIR)'
- @if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
-
-#---------------------------------------------------------------------
-# Clean up
-#---------------------------------------------------------------------
-
-clean:
- @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
- @if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc
- @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i
- @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x
- @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch
-
-realclean: clean
- @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
-
-distclean: realclean
- @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
- @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
OSDN Git Service
