package android.hardware.wifi@1.0;
import IWifiChipEventCallback;
+import IWifiIface;
+import IWifiApIface;
+import IWifiNanIface;
+import IWifiP2pIface;
+import IWifiStaIface;
+import IWifiRttController;
/**
* Interface that represents a chip that must be configured as a single unit.
* to perform operations like NAN, RTT, etc.
*/
interface IWifiChip {
- enum IfaceType : uint32_t {
- STA, AP, P2P,
- /**
- * NAN control interface. Datapath support may be queried and created
- * through this interface.
- */
- NAN,
- };
-
/**
* Set of interface types with the maximum number of interfaces that can have
* one of the specified type for a given ChipIfaceCombination. See
* ChipIfaceCombination for examples.
*/
struct ChipIfaceCombinationLimit {
- vec<IfaceType> types; // Each IfaceType may occur at most once
+ vec<IfaceType> types; // Each IfaceType must occur at most once.
uint32_t maxIfaces;
};
* [{STA} <=1, {AP} <= 1].
*
* When switching between two available combinations it is expected that
- * interfaces only supported by the initial combination will be removed until
+ * interfaces only supported by the initial combination must be removed until
* the target combination is also satisfied. At that point new interfaces
* satisfying only the target combination can be added (meaning the initial
* combination limits will no longer satisfied). The addition of these new
- * interfaces should not impact the existence of interfaces that satisfy both
+ * interfaces must not impact the existence of interfaces that satisfy both
* combinations.
*
* For example, a chip with available combinations:
* AP interface in place of one of the STAs then first one of the STA
* interfaces must be removed and then the AP interface can be created after
* the STA had been torn down. During this process the remaining STA and NAN
- * interfaces should not be removed/recreated.
+ * interfaces must not be removed/recreated.
*
* If a chip does not support this kind of reconfiguration in this mode then
- * the combinations should be separated into two separate modes. Before
- * switching modes all interfaces will be torn down, the mode switch will be
- * enacted and when it completes the new interfaces will be brought up.
+ * the combinations must be separated into two separate modes. Before
+ * switching modes all interfaces must be torn down, the mode switch must be
+ * enacted and when it completes the new interfaces must be brought up.
*/
struct ChipMode {
/**
};
/**
+ * Information about the version of the driver and firmware running this chip.
+ *
+ * The information in these ASCII strings are vendor specific and does not
+ * need to follow any particular format. It may be dumped as part of the bug
+ * report.
+ */
+ struct ChipDebugInfo {
+ string driverDescription;
+ string firmwareDescription;
+ };
+
+ /**
+ * Capabilities exposed by this chip.
+ */
+ enum ChipCapabilityMask : uint32_t {
+ /**
+ * Memory dump of Firmware.
+ */
+ DEBUG_MEMORY_FIRMWARE_DUMP = 1 << 0,
+ /**
+ * Memory dump of Driver.
+ */
+ DEBUG_MEMORY_DRIVER_DUMP = 1 << 1,
+ /**
+ * Connectivity events reported via debug ring buffer.
+ */
+ DEBUG_RING_BUFFER_CONNECT_EVENT = 1 << 2,
+ /**
+ * Power events reported via debug ring buffer.
+ */
+ DEBUG_RING_BUFFER_POWER_EVENT = 1 << 3,
+ /**
+ * Wakelock events reported via debug ring buffer.
+ */
+ DEBUG_RING_BUFFER_WAKELOCK_EVENT = 1 << 4,
+ /**
+ * Vendor data reported via debug ring buffer.
+ * This mostly contains firmware event logs.
+ */
+ DEBUG_RING_BUFFER_VENDOR_DATA = 1 << 5,
+ /**
+ * Host wake reasons stats collection.
+ */
+ DEBUG_HOST_WAKE_REASON_STATS = 1 << 6,
+ /**
+ * Error alerts.
+ */
+ DEBUG_ERROR_ALERTS = 1 << 7
+ };
+
+ /**
+ * Get the id assigned to this chip.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+ * @return id Assigned chip Id.
+ */
+ getId() generates (WifiStatus status, ChipId id);
+
+ /**
* Requests notifications of significant events on this chip. Multiple calls
- * to this will register multiple callbacks each of which will receive all
+ * to this must register multiple callbacks each of which must receive all
* events.
*
* @param callback An instance of the |IWifiChipEventCallback| HIDL interface
* object.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+ */
+ registerEventCallback(IWifiChipEventCallback callback) generates (WifiStatus status);
+
+ /**
+ * Get the capabilities supported by this chip.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+ * |WifiStatusCode.ERROR_UNKNOWN|
+ * @return capabilities Bitset of |ChipCapabilityMask| values.
*/
- oneway registerEventCallback(IWifiChipEventCallback callback);
+ getCapabilities() generates (WifiStatus status, uint32_t capabilities);
/**
* Get the set of operation modes that the chip supports.
*
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
* @return modes List of modes supported by the device.
*/
- getAvailableModes() generates (vec<ChipMode> modes);
+ getAvailableModes() generates (WifiStatus status, vec<ChipMode> modes);
/**
* Reconfigure the Chip.
- * Must trigger |IWifiChipEventCallback.onChipReconfigured| on sucess,
- * or |IWifiChipEventCallback.onChipReconfigureFailure| on failure.
+ * Any existing |IWifiIface| objects must be marked invalid after this call.
+ * If this fails then the chips is now in an undefined state and
+ * configureChip must be called again.
+ * Must trigger |IWifiChipEventCallback.onChipReconfigured| on success.
+ * Must trigger |IWifiEventCallback.onFailure| on failure.
*
- * @param modeId The mode that the chip should switch to, corresponding to the
+ * @param modeId The mode that the chip must switch to, corresponding to the
* id property of the target ChipMode.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+ * |WifiStatusCode.ERROR_UNKNOWN|
*/
- oneway configureChip(ChipModeId modeId);
+ configureChip(ChipModeId modeId) generates (WifiStatus status);
/**
* Get the current mode that the chip is in.
*
* @return modeId The mode that the chip is currently configured to,
* corresponding to the id property of the target ChipMode.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
*/
- getMode() generates (ChipModeId modeId);
+ getMode() generates (WifiStatus status, ChipModeId modeId);
/**
* Request information about the chip.
- * Must trigger |IWifiChipEventCallback.onChipDebugInfoAvailable| on sucess,
- * or |IWifiChipEventCallback.onChipDebugInfoFailure| on failure.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+ * |WifiStatusCode.ERROR_UNKNOWN|
+ * @return chipDebugInfo Instance of |ChipDebugInfo|.
*/
- oneway requestChipDebugInfo();
+ requestChipDebugInfo() generates (WifiStatus status, ChipDebugInfo chipDebugInfo);
/**
* Request vendor debug info from the driver.
- * Must trigger |IWifiChipEventCallback.onDriverDebugDumpAvailable| on success,
- * or |IWifiChipEventCallback.onDriverDebugDumpFailure| on failure.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+ * |WifiStatusCode.ERROR_UNKNOWN|
+ * @param blob Vector of bytes retrieved from the driver.
*/
- oneway requestDriverDebugDump();
+ requestDriverDebugDump() generates (WifiStatus status, vec<uint8_t> blob);
/**
* Request vendor debug info from the firmware.
- * Must trigger |IWifiChipEventCallback.onFirmwareDebugDumpAvailable| on
- * success, or |IWifiChipEventCallback.onFirmwareDebugDumpFailure| on failure.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_AVAILABLE|,
+ * |WifiStatusCode.ERROR_UNKNOWN|
+ * @param blob Vector of bytes retrieved from the driver.
+ */
+ requestFirmwareDebugDump() generates (WifiStatus status, vec<uint8_t> blob);
+
+ /**
+ * Create an AP iface on the chip.
+ *
+ * Depending on the mode the chip is configured in, the interface creation
+ * may fail (code: |ERROR_NOT_AVAILABLE|) if we've already reached the maximum
+ * allowed (specified in |ChipIfaceCombination|) number of ifaces of the AP
+ * type.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_SUPPORTED|
+ * @return iface HIDL interface object representing the iface if
+ * successful, null otherwise.
+ */
+ createApIface() generates (WifiStatus status, IWifiApIface iface);
+
+ /**
+ * List all the AP iface names configured on the chip.
+ * The corresponding |IWifiApIface| object for any iface are
+ * retrieved using |getApIface| method.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+ * @return ifnames List of all AP iface names on the chip.
+ */
+ getApIfaceNames() generates (WifiStatus status, vec<string> ifnames);
+
+ /**
+ * Gets a HIDL interface object for the AP Iface corresponding
+ * to the provided ifname.
+ *
+ * @param ifname Name of the iface.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_INVALID_ARGS|
+ * @return iface HIDL interface object representing the iface if
+ * it exists, null otherwise.
+ */
+ getApIface(string ifname) generates (WifiStatus status, IWifiApIface iface);
+
+ /**
+ * Removes the AP Iface with the provided ifname.
+ * Any further calls on the corresponding |IWifiApIface| HIDL interface
+ * object must fail.
+ *
+ * @param ifname Name of the iface.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_INVALID_ARGS|
+ */
+ removeApIface(string ifname) generates (WifiStatus status);
+
+ /**
+ * Create a NAN iface on the chip.
+ *
+ * Depending on the mode the chip is configured in, the interface creation
+ * may fail (code: |ERROR_NOT_AVAILABLE|) if we've already reached the maximum
+ * allowed (specified in |ChipIfaceCombination|) number of ifaces of the NAN
+ * type.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_SUPPORTED|
+ * @return iface HIDL interface object representing the iface if
+ * successful, null otherwise.
+ */
+ createNanIface() generates (WifiStatus status, IWifiNanIface iface);
+
+ /**
+ * List all the NAN iface names configured on the chip.
+ * The corresponding |IWifiNanIface| object for any iface are
+ * retrieved using |getNanIface| method.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+ * @return ifnames List of all NAN iface names on the chip.
+ */
+ getNanIfaceNames() generates (WifiStatus status, vec<string> ifnames);
+
+ /**
+ * Gets a HIDL interface object for the NAN Iface corresponding
+ * to the provided ifname.
+ *
+ * @param ifname Name of the iface.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_INVALID_ARGS|
+ * @return iface HIDL interface object representing the iface if
+ * it exists, null otherwise.
+ */
+ getNanIface(string ifname) generates (WifiStatus status, IWifiNanIface iface);
+
+ /**
+ * Removes the NAN Iface with the provided ifname.
+ * Any further calls on the corresponding |IWifiNanIface| HIDL interface
+ * object must fail.
+ *
+ * @param ifname Name of the iface.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_INVALID_ARGS|
+ */
+ removeNanIface(string ifname) generates (WifiStatus status);
+
+ /**
+ * Create a P2P iface on the chip.
+ *
+ * Depending on the mode the chip is configured in, the interface creation
+ * may fail (code: |ERROR_NOT_AVAILABLE|) if we've already reached the maximum
+ * allowed (specified in |ChipIfaceCombination|) number of ifaces of the P2P
+ * type.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_SUPPORTED|
+ * @return iface HIDL interface object representing the iface if
+ * successful, null otherwise.
+ */
+ createP2pIface() generates (WifiStatus status, IWifiP2pIface iface);
+
+ /**
+ * List all the P2P iface names configured on the chip.
+ * The corresponding |IWifiP2pIface| object for any iface are
+ * retrieved using |getP2pIface| method.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+ * @return ifnames List of all P2P iface names on the chip.
+ */
+ getP2pIfaceNames() generates (WifiStatus status, vec<string> ifnames);
+
+ /**
+ * Gets a HIDL interface object for the P2P Iface corresponding
+ * to the provided ifname.
+ *
+ * @param ifname Name of the iface.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_INVALID_ARGS|
+ * @return iface HIDL interface object representing the iface if
+ * it exists, null otherwise.
+ */
+ getP2pIface(string ifname) generates (WifiStatus status, IWifiP2pIface iface);
+
+ /**
+ * Removes the P2P Iface with the provided ifname.
+ * Any further calls on the corresponding |IWifiP2pIface| HIDL interface
+ * object must fail.
+ *
+ * @param ifname Name of the iface.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_INVALID_ARGS|
+ */
+ removeP2pIface(string ifname) generates (WifiStatus status);
+
+ /**
+ * Create an STA iface on the chip.
+ *
+ * Depending on the mode the chip is configured in, the interface creation
+ * may fail (code: |ERROR_NOT_AVAILABLE|) if we've already reached the maximum
+ * allowed (specified in |ChipIfaceCombination|) number of ifaces of the STA
+ * type.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_SUPPORTED|
+ * @return iface HIDL interface object representing the iface if
+ * successful, null otherwise.
+ */
+ createStaIface() generates (WifiStatus status, IWifiStaIface iface);
+
+ /**
+ * List all the STA iface names configured on the chip.
+ * The corresponding |IWifiStaIface| object for any iface are
+ * retrieved using |getStaIface| method.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+ * @return ifnames List of all STA iface names on the chip.
+ */
+ getStaIfaceNames() generates (WifiStatus status, vec<string> ifnames);
+
+ /**
+ * Gets a HIDL interface object for the STA Iface corresponding
+ * to the provided ifname.
+ *
+ * @param ifname Name of the iface.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_INVALID_ARGS|
+ * @return iface HIDL interface object representing the iface if
+ * it exists, null otherwise.
+ */
+ getStaIface(string ifname) generates (WifiStatus status, IWifiStaIface iface);
+
+ /**
+ * Removes the STA Iface with the provided ifname.
+ * Any further calls on the corresponding |IWifiStaIface| HIDL interface
+ * object must fail.
+ *
+ * @param ifname Name of the iface.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_INVALID_ARGS|
+ */
+ removeStaIface(string ifname) generates (WifiStatus status);
+
+ /**
+ * Create a RTTController instance.
+ *
+ * RTT controller can be either:
+ * a) Bound to a specific iface by passing in the corresponding |IWifiIface|
+ * object in |iface| param, OR
+ * b) Let the implementation decide the iface to use for RTT operations by
+ * passing null in |iface| param.
+ *
+ * @param boundIface HIDL interface object representing the iface if
+ * the responder must be bound to a specific iface, null otherwise.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|
+ */
+ createRttController(IWifiIface boundIface)
+ generates (WifiStatus status, IWifiRttController rtt);
+
+ /**
+ * WiFi debug ring buffer life cycle is as follow:
+ * - At initialization time, framework must call |getDebugRingBuffersStatus|.
+ * to obtain the names and list of supported ring buffers.
+ * The driver may expose several different rings each holding a different
+ * type of data (connection events, power events, etc).
+ * - When WiFi operations start framework must call
+ * |startLoggingToDebugRingBuffer| to trigger log collection for a specific
+ * ring. The vebose level for each ring buffer can be specified in this API.
+ * - During wifi operations, driver must periodically report per ring data to
+ * framework by invoking the
+ * |IWifiChipEventCallback.onDebugRingBufferDataAvailable| callback.
+ * - When capturing a bug report, framework must indicate to driver that all
+ * the data has to be uploaded urgently by calling
+ * |forceDumpToDebugRingBuffer|.
+ *
+ * The data uploaded by driver must be stored by framework in separate files,
+ * with one stream of file per ring. Framework must store the files in pcapng
+ * format, allowing for easy merging and parsing with network analyzer tools.
+ * TODO: Since we're not longer dumping out the raw data, storing in separate
+ * pcapng files for parsing later must not work anymore.
+ */
+ /**
+ * API to get the status of all ring buffers supported by driver.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+ * |WifiStatusCode.NOT_AVAILABLE|,
+ * |WifiStatusCode.UNKNOWN|
+ * @return ringBuffers Vector of |WifiDebugRingBufferStatus| corresponding to the
+ * status of each ring bufffer on the device.
+ */
+ getDebugRingBuffersStatus() generates (WifiStatus status,
+ vec<WifiDebugRingBufferStatus> ringBuffers);
+
+ /**
+ * API to trigger the debug data collection.
+ *
+ * @param ringName represent the name of the ring for which data collection
+ * shall start. This can be retrieved via the corresponding
+ * |WifiDebugRingBufferStatus|.
+ * @parm maxIntervalInSec Maximum interval in seconds for driver to invoke
+ * |onDebugRingBufferData|, ignore if zero.
+ * @parm minDataSizeInBytes: Minimum data size in buffer for driver to invoke
+ * |onDebugRingBufferData|, ignore if zero.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+ * |WifiStatusCode.NOT_AVAILABLE|,
+ * |WifiStatusCode.UNKNOWN|
+ */
+ startLoggingToDebugRingBuffer(string ringName,
+ WifiDebugRingBufferVerboseLevel verboseLevel,
+ uint32_t maxIntervalInSec,
+ uint32_t minDataSizeInBytes)
+ generates (WifiStatus status);
+
+ /**
+ * API to force dump data into the corresponding ring buffer.
+ * This is to be invoked during bugreport collection.
+ *
+ * @param ringName represent the name of the ring for which data collection
+ * shall be forced. This can be retrieved via the corresponding
+ * |WifiDebugRingBufferStatus|.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+ * |WifiStatusCode.ERROR_NOT_STARTED|,
+ * |WifiStatusCode.NOT_AVAILABLE|,
+ * |WifiStatusCode.UNKNOWN|
+ */
+ forceDumpToDebugRingBuffer(string ringName) generates (WifiStatus status);
+
+ /**
+ * API to retrieve the wifi wake up reason stats for debugging.
+ * The driver is expected to start maintaining these stats once the chip
+ * is configured using |configureChip|. These stats must be reset whenever
+ * the chip is reconfigured or the HAL is stopped.
+ *
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+ * |WifiStatusCode.NOT_AVAILABLE|,
+ * |WifiStatusCode.UNKNOWN|
+ * @return stats Instance of |WifiDebugHostWakeReasonStats|.
+ */
+ getDebugHostWakeReasonStats()
+ generates (WifiStatus status, WifiDebugHostWakeReasonStats stats);
+
+ /**
+ * API to enable/disable alert notifications from the chip.
+ * These alerts must be used to notify framework of any fatal error events
+ * that the chip encounters via |IWifiChipEventCallback.onDebugErrorAlert| method.
+ * Must fail if |ChipCapabilityMask.DEBUG_ERROR_ALERTS| is not set.
+ *
+ * @param enable true to enable, false to disable.
+ * @return status WifiStatus of the operation.
+ * Possible status codes:
+ * |WifiStatusCode.SUCCESS|,
+ * |WifiStatusCode.ERROR_WIFI_CHIP_INVALID|,
+ * |WifiStatusCode.ERROR_NOT_SUPPORTED|,
+ * |WifiStatusCode.NOT_AVAILABLE|,
+ * |WifiStatusCode.UNKNOWN|
*/
- oneway requestFirmwareDebugDump();
+ enableDebugErrorAlerts(bool enable) generates (WifiStatus status);
};