Increase channel delay to 100ms

[android-x86/external-wpa_supplicant_8.git] / wpa_supplicant / README-P2P

diff --git a/wpa_supplicant/README-P2P b/wpa_supplicant/README-P2P
index bb4c2ad..4abc2f2 100644 (file)
--- a/wpa_supplicant/README-P2P
+++ b/wpa_supplicant/README-P2P
@@ -71,7 +71,8 @@ over the main control interface.
 
 Device Discovery
 
-p2p_find [timeout in seconds] [type=<social|progressive>]
+p2p_find [timeout in seconds] [type=<social|progressive>] \
+       [dev_id=<addr>] [delay=<search delay in ms>]
 
 The default behavior is to run a single full scan in the beginning and
 then scan only social channels. type=social will scan only social
@@ -81,6 +82,11 @@ progressively one channel at the time in the Search state rounds. This
 will help in finding new groups or groups missed during the initial
 full scan.
 
+The optional dev_id option can be used to specify a single P2P peer to
+search for. The optional delay parameter can be used to request an extra
+delay to be used between search iterations (e.g., to free up radio
+resources for concurrent operations).
+
 p2p_listen [timeout in seconds]
 
 Start Listen-only state (become discoverable without searching for
@@ -119,7 +125,7 @@ join-a-group style PD instead of GO Negotiation style PD.
 
 p2p_connect <peer device address> <pbc|pin|PIN#> [display|keypad]
        [persistent|persistent=<network id>] [join|auth]
-       [go_intent=<0..15>] [freq=<in MHz>] [provdisc]
+       [go_intent=<0..15>] [freq=<in MHz>] [ht40] [provdisc]
 
 Start P2P group formation with a discovered P2P peer. This includes
 optional group owner negotiation, group interface setup, provisioning,
@@ -160,7 +166,7 @@ used prior to starting GO Negotiation as a workaround with some deployed
 P2P implementations that require this to allow the user to accept the
 connection.
 
-p2p_group_add [persistent|persistent=<network id>] [freq=<freq in MHz>]
+p2p_group_add [persistent|persistent=<network id>] [freq=<freq in MHz>] [ht40]
 
 Set up a P2P group owner manually (i.e., without group owner
 negotiation with a specific peer). This is also known as autonomous
@@ -250,6 +256,14 @@ p2p_serv_disc_req 00:00:00:00:00:00 upnp 10 urn:schemas-upnp-org:service:Content
 p2p_serv_disc_req 00:00:00:00:00:00 upnp 10 uuid:6859dede-8574-59ab-9332-123456789012
 p2p_serv_disc_req 00:00:00:00:00:00 upnp 10 urn:schemas-upnp-org:device:InternetGatewayDevice:1
 
+# Wi-Fi Display examples
+# format: wifi-display <list of roles> <list of subelements>
+p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source] 2,3,4,5
+p2p_serv_disc_req 02:01:02:03:04:05 wifi-display [pri-sink] 3
+p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [sec-source] 2
+p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source+sink] 2,3,4,5
+p2p_serv_disc_req 00:00:00:00:00:00 wifi-display [source][pri-sink] 2,3,4,5
+
 p2p_serv_disc_cancel_req <query identifier>
 
 Cancel a pending P2P service discovery request. This command takes a
@@ -332,7 +346,7 @@ Remove all local services from internal SD query processing.
 Invitation
 
 p2p_invite [persistent=<network id>|group=<group ifname>] [peer=address]
-       [go_dev_addr=address]
+       [go_dev_addr=address] [freq=<freq in MHz>] [ht40]
 
 Invite a peer to join a group (e.g., group=wlan1) or to reinvoke a
 persistent group (e.g., persistent=4). If the peer device is the GO of
@@ -340,7 +354,8 @@ the persistent group, the peer parameter is not needed. Otherwise it is
 used to specify which device to invite. go_dev_addr parameter can be
 used to override the GO device address for Invitation Request should
 it be not known for some reason (this should not be needed in most
-cases).
+cases). When reinvoking a persistent group, the GO device can specify
+the frequency for the group with the freq parameter.
 
 Group Operations