#define DEFAULT_FAST_REAUTH 1
#define DEFAULT_P2P_GO_INTENT 7
#define DEFAULT_P2P_INTRA_BSS 1
+#define DEFAULT_P2P_GO_MAX_INACTIVITY (5 * 60)
#define DEFAULT_BSS_MAX_COUNT 200
#define DEFAULT_BSS_EXPIRATION_AGE 180
#define DEFAULT_BSS_EXPIRATION_SCAN_COUNT 2
#define DEFAULT_MAX_NUM_STA 128
#define DEFAULT_ACCESS_NETWORK_TYPE 15
+#define DEFAULT_SCAN_CUR_FREQ 0
#include "config_ssid.h"
#include "wps/wps.h"
+#include "common/ieee802_11_common.h"
struct wpa_cred {
char *password;
/**
+ * ext_password - Whether password is a name for external storage
+ */
+ int ext_password;
+
+ /**
* ca_cert - CA certificate for Interworking network selection
*/
char *ca_cert;
* whether the AP is operated by the Home SP.
*/
char *domain;
+
+ /**
+ * roaming_consortium - Roaming Consortium OI
+ *
+ * If roaming_consortium_len is non-zero, this field contains the
+ * Roaming Consortium OI that can be used to determine which access
+ * points support authentication with this credential. This is an
+ * alternative to the use of the realm parameter. When using Roaming
+ * Consortium to match the network, the EAP parameters need to be
+ * pre-configured with the credential since the NAI Realm information
+ * may not be available or fetched.
+ */
+ u8 roaming_consortium[15];
+
+ /**
+ * roaming_consortium_len - Length of roaming_consortium
+ */
+ size_t roaming_consortium_len;
+
+ /**
+ * eap_method - EAP method to use
+ *
+ * Pre-configured EAP method to use with this credential or %NULL to
+ * indicate no EAP method is selected, i.e., the method will be
+ * selected automatically based on ANQP information.
+ */
+ struct eap_method_type *eap_method;
+
+ /**
+ * phase1 - Phase 1 (outer authentication) parameters
+ *
+ * Pre-configured EAP parameters or %NULL.
+ */
+ char *phase1;
+
+ /**
+ * phase2 - Phase 2 (inner authentication) parameters
+ *
+ * Pre-configured EAP parameters or %NULL.
+ */
+ char *phase2;
+
+ struct excluded_ssid {
+ u8 ssid[MAX_SSID_LEN];
+ size_t ssid_len;
+ } *excluded_ssid;
+ size_t num_excluded_ssid;
};
#define CFG_CHANGED_P2P_LISTEN_CHANNEL BIT(11)
#define CFG_CHANGED_P2P_OPER_CHANNEL BIT(12)
#define CFG_CHANGED_P2P_PREF_CHAN BIT(13)
-#ifdef ANDROID_P2P
-#define CFG_CHANGED_IFACE_PRIORITY BIT(14)
-#endif
+#define CFG_CHANGED_EXT_PW_BACKEND BIT(14)
+#define CFG_CHANGED_NFC_PASSWORD_TOKEN BIT(15)
/**
* struct wpa_config - wpa_supplicant configuration data
int p2p_intra_bss;
unsigned int num_p2p_pref_chan;
struct p2p_channel *p2p_pref_chan;
+ int p2p_ignore_shared_freq;
struct wpabuf *wps_vendor_ext_m1;
int filter_ssids;
/**
+ * filter_rssi - RSSI-based scan result filtering
+ *
+ * 0 = do not filter scan results
+ * -n = filter scan results below -n dBm
+ */
+ int filter_rssi;
+
+ /**
* max_num_sta - Maximum number of STAs in an AP/P2P GO
*/
unsigned int max_num_sta;
/**
+ * freq_list - Array of allowed scan frequencies or %NULL for all
+ *
+ * This is an optional zero-terminated array of frequencies in
+ * megahertz (MHz) to allow for narrowing scanning range.
+ */
+ int *freq_list;
+
+ /**
+ * scan_cur_freq - Whether to scan only the current channel
+ *
+ * If true, attempt to scan only the current channel if any other
+ * VIFs on this radio are already associated on a particular channel.
+ */
+ int scan_cur_freq;
+
+ /**
* changed_parameters - Bitmap of changed parameters since last update
*/
unsigned int changed_parameters;
char *autoscan;
/**
+ * wps_nfc_pw_from_config - NFC Device Password was read from config
+ *
+ * This parameter can be determined whether the NFC Device Password was
+ * included in the configuration (1) or generated dynamically (0). Only
+ * the former case is re-written back to the configuration file.
+ */
+ int wps_nfc_pw_from_config;
+
+ /**
* wps_nfc_dev_pw_id - NFC Device Password ID for password token
*/
int wps_nfc_dev_pw_id;
struct wpabuf *wps_nfc_dh_pubkey;
/**
- * wps_nfc_dh_pubkey - NFC DH Private Key for password token
+ * wps_nfc_dh_privkey - NFC DH Private Key for password token
*/
struct wpabuf *wps_nfc_dh_privkey;
/**
- * wps_nfc_dh_pubkey - NFC Device Password for password token
+ * wps_nfc_dev_pw - NFC Device Password for password token
*/
struct wpabuf *wps_nfc_dev_pw;
-#ifdef ANDROID_P2P
/**
- * prioritize - Prioritize an Interface
- * Interface name of the interface that needs to be proritized; Useful
- * for resolving conflicts in connection. up to 16 octets encoded in
- * UTF-8
+ * ext_password_backend - External password backend or %NULL if none
+ *
+ * format: <backend name>[:<optional backend parameters>]
+ */
+ char *ext_password_backend;
+
+ /*
+ * p2p_go_max_inactivity - Timeout in seconds to detect STA inactivity
+ *
+ * This timeout value is used in P2P GO mode to clean up
+ * inactive stations.
+ * By default: 300 seconds.
+ */
+ int p2p_go_max_inactivity;
+
+ struct hostapd_wmm_ac_params wmm_ac_params[4];
+
+ /**
+ * auto_interworking - Whether to use network selection automatically
+ *
+ * 0 = do not automatically go through Interworking network selection
+ * (i.e., require explicit interworking_select command for this)
+ * 1 = perform Interworking network selection if one or more
+ * credentials have been configured and scan did not find a
+ * matching network block
+ */
+ int auto_interworking;
+
+ /**
+ * p2p_go_ht40 - Default mode for HT40 enable when operating as GO.
+ *
+ * This will take effect for p2p_group_add, p2p_connect, and p2p_invite.
+ * Note that regulatory constraints and driver capabilities are
+ * consulted anyway, so setting it to 1 can't do real harm.
+ * By default: 0 (disabled)
+ */
+ int p2p_go_ht40;
+
+ /**
+ * p2p_disabled - Whether P2P operations are disabled for this interface
+ */
+ int p2p_disabled;
+
+ /**
+ * p2p_no_group_iface - Whether group interfaces can be used
+ *
+ * By default, wpa_supplicant will create a separate interface for P2P
+ * group operations if the driver supports this. This functionality can
+ * be disabled by setting this parameter to 1. In that case, the same
+ * interface that was used for the P2P management operations is used
+ * also for the group operation.
+ */
+ int p2p_no_group_iface;
+
+ /**
+ * okc - Whether to enable opportunistic key caching by default
+ *
+ * By default, OKC is disabled unless enabled by the per-network
+ * proactive_key_caching=1 parameter. okc=1 can be used to change this
+ * default behavior.
+ */
+ int okc;
+
+ /**
+ * pmf - Whether to enable/require PMF by default
+ *
+ * By default, PMF is disabled unless enabled by the per-network
+ * ieee80211w=1 or ieee80211w=2 parameter. pmf=1/2 can be used to change
+ * this default behavior.
+ */
+ enum mfp_options pmf;
+
+ /**
+ * sae_groups - Preference list of enabled groups for SAE
+ *
+ * By default (if this parameter is not set), the mandatory group 19
+ * (ECC group defined over a 256-bit prime order field) is preferred,
+ * but other groups are also enabled. If this parameter is set, the
+ * groups will be tried in the indicated order.
+ */
+ int *sae_groups;
+
+ /**
+ * dtim_period - Default DTIM period in Beacon intervals
+ *
+ * This parameter can be used to set the default value for network
+ * blocks that do not specify dtim_period.
+ */
+ int dtim_period;
+
+ /**
+ * beacon_int - Default Beacon interval in TU
+ *
+ * This parameter can be used to set the default value for network
+ * blocks that do not specify beacon_int.
+ */
+ int beacon_int;
+
+ /**
+ * ap_vendor_elements: Vendor specific elements for Beacon/ProbeResp
+ *
+ * This parameter can be used to define additional vendor specific
+ * elements for Beacon and Probe Response frames in AP/P2P GO mode. The
+ * format for these element(s) is a hexdump of the raw information
+ * elements (id+len+payload for one or more elements).
+ */
+ struct wpabuf *ap_vendor_elements;
+
+ /**
+ * ignore_old_scan_res - Ignore scan results older than request
+ *
+ * The driver may have a cache of scan results that makes it return
+ * information that is older than our scan trigger. This parameter can
+ * be used to configure such old information to be ignored instead of
+ * allowing it to update the internal BSS table.
+ */
+ int ignore_old_scan_res;
+
+ /**
+ * sched_scan_interval - schedule scan interval
+ */
+ unsigned int sched_scan_interval;
+
+ /**
+ * tdls_external_control - External control for TDLS setup requests
+ *
+ * Enable TDLS mode where external programs are given the control
+ * to specify the TDLS link to get established to the driver. The
+ * driver requests the TDLS setup to the supplicant only for the
+ * specified TDLS peers.
+ *
*/
- char *prioritize;
-#endif
+ int tdls_external_control;
};
* wpa_config_read - Read and parse configuration database
* @name: Name of the configuration (e.g., path and file name for the
* configuration file)
+ * @cfgp: Pointer to previously allocated configuration data or %NULL if none
* Returns: Pointer to allocated configuration data or %NULL on failure
*
* This function reads configuration data, parses its contents, and allocates
*
* Each configuration backend needs to implement this function.
*/
-struct wpa_config * wpa_config_read(const char *name);
+struct wpa_config * wpa_config_read(const char *name, struct wpa_config *cfgp);
/**
* wpa_config_write - Write or update configuration data