WPA_CIPHER_WEP104 | WPA_CIPHER_WEP40)
#define DEFAULT_FRAGMENT_SIZE 1398
+#define DEFAULT_BG_SCAN_PERIOD -1
#define DEFAULT_DISABLE_HT 0
#define DEFAULT_DISABLE_HT40 0
+#define DEFAULT_DISABLE_SGI 0
#define DEFAULT_DISABLE_MAX_AMSDU -1 /* no change */
#define DEFAULT_AMPDU_FACTOR -1 /* no change */
#define DEFAULT_AMPDU_DENSITY -1 /* no change */
char *passphrase;
/**
+ * ext_psk - PSK/passphrase name in external storage
+ *
+ * If this is set, PSK/passphrase will be fetched from external storage
+ * when requesting association with the network.
+ */
+ char *ext_psk;
+
+ /**
* pairwise_cipher - Bitfield of allowed pairwise ciphers, WPA_CIPHER_*
*/
int pairwise_cipher;
int key_mgmt;
/**
+ * bg_scan_period - Background scan period in seconds, 0 to disable, or
+ * -1 to indicate no change to default driver configuration
+ */
+ int bg_scan_period;
+
+ /**
* proto - Bitfield of allowed protocols, WPA_PROTO_*
*/
int proto;
*
* This field can be used to enable proactive key caching which is also
* known as opportunistic PMKSA caching for WPA2. This is disabled (0)
- * by default. Enable by setting this to 1.
+ * by default unless default value is changed with the global okc=1
+ * parameter. Enable by setting this to 1.
*
* Proactive key caching is used to make supplicant assume that the APs
* are using the same PMK and generate PMKSA cache entries without
* doing RSN pre-authentication. This requires support from the AP side
* and is normally used with wireless switches that co-locate the
* authenticator.
+ *
+ * Internally, special value -1 is used to indicate that the parameter
+ * was not specified in the configuration (i.e., default behavior is
+ * followed).
*/
int proactive_key_caching;
int disabled;
/**
+ * disabled_for_connect - Whether this network was temporarily disabled
+ *
+ * This flag is used to reenable all the temporarily disabled networks
+ * after either the success or failure of a WPS connection.
+ */
+ int disabled_for_connect;
+
+ /**
* peerkey - Whether PeerKey handshake for direct links is allowed
*
* This is only used when both RSN/WPA2 and IEEE 802.11e (QoS) are
*
* This value is used to configure policy for management frame
* protection (IEEE 802.11w). 0 = disabled, 1 = optional, 2 = required.
+ * This is disabled by default unless the default value has been changed
+ * with the global pmf=1/2 parameter.
+ *
+ * Internally, special value 3 is used to indicate that the parameter
+ * was not specified in the configuration (i.e., default behavior is
+ * followed).
*/
enum mfp_options ieee80211w;
#endif /* CONFIG_IEEE80211W */
*/
int frequency;
+ int ht40;
+
/**
* wpa_ptk_rekey - Maximum lifetime for PTK in seconds
*
char *bgscan;
/**
+ * ignore_broadcast_ssid - Hide SSID in AP mode
+ *
+ * Send empty SSID in beacons and ignore probe request frames that do
+ * not specify full SSID, i.e., require stations to know SSID.
+ * default: disabled (0)
+ * 1 = send empty (length=0) SSID in beacon and ignore probe request
+ * for broadcast SSID
+ * 2 = clear SSID (ASCII 0), but keep the original length (this may be
+ * required with some clients that do not support empty SSID) and
+ * ignore probe requests for broadcast SSID
+ */
+ int ignore_broadcast_ssid;
+
+ /**
* freq_list - Array of allowed frequencies or %NULL for all
*
* This is an optional zero-terminated array of frequencies in
*/
size_t num_p2p_clients;
+#ifndef P2P_MAX_STORED_CLIENTS
+#define P2P_MAX_STORED_CLIENTS 100
+#endif /* P2P_MAX_STORED_CLIENTS */
+
/**
* p2p_group - Network generated as a P2P group (used internally)
*/
*/
int export_keys;
+#ifdef ANDROID_P2P
+ /**
+ * assoc_retry - Number of times association should be retried.
+ */
+ int assoc_retry;
+#endif
+
#ifdef CONFIG_HT_OVERRIDES
/**
* disable_ht - Disable HT (IEEE 802.11n) for this network
int disable_ht40;
/**
+ * disable_sgi - Disable SGI (Short Guard Interval) for this network
+ *
+ * By default, use it if it is available, but this can be configured
+ * to 1 to have it disabled.
+ */
+ int disable_sgi;
+
+ /**
* disable_max_amsdu - Disable MAX A-MSDU
*
* A-MDSU will be 3839 bytes when disabled, or 7935
*/
char *ht_mcs;
#endif /* CONFIG_HT_OVERRIDES */
+
+#ifdef CONFIG_VHT_OVERRIDES
+ /**
+ * disable_vht - Disable VHT (IEEE 802.11ac) for this network
+ *
+ * By default, use it if it is available, but this can be configured
+ * to 1 to have it disabled.
+ */
+ int disable_vht;
+
+ /**
+ * vht_capa - VHT capabilities to use
+ */
+ unsigned int vht_capa;
+
+ /**
+ * vht_capa_mask - mask for VHT capabilities
+ */
+ unsigned int vht_capa_mask;
+
+ int vht_rx_mcs_nss_1, vht_rx_mcs_nss_2,
+ vht_rx_mcs_nss_3, vht_rx_mcs_nss_4,
+ vht_rx_mcs_nss_5, vht_rx_mcs_nss_6,
+ vht_rx_mcs_nss_7, vht_rx_mcs_nss_8;
+ int vht_tx_mcs_nss_1, vht_tx_mcs_nss_2,
+ vht_tx_mcs_nss_3, vht_tx_mcs_nss_4,
+ vht_tx_mcs_nss_5, vht_tx_mcs_nss_6,
+ vht_tx_mcs_nss_7, vht_tx_mcs_nss_8;
+#endif /* CONFIG_VHT_OVERRIDES */
+
+ /**
+ * ap_max_inactivity - Timeout in seconds to detect STA's inactivity
+ *
+ * This timeout value is used in AP mode to clean up inactive stations.
+ * By default: 300 seconds.
+ */
+ int ap_max_inactivity;
+
+ /**
+ * dtim_period - DTIM period in Beacon intervals
+ * By default: 2
+ */
+ int dtim_period;
+
+ /**
+ * beacon_int - Beacon interval (default: 100 TU)
+ */
+ int beacon_int;
+
+ /**
+ * auth_failures - Number of consecutive authentication failures
+ */
+ unsigned int auth_failures;
+
+ /**
+ * disabled_until - Network block disabled until this time if non-zero
+ */
+ struct os_time disabled_until;
+
+ /**
+ * parent_cred - Pointer to parent wpa_cred entry
+ *
+ * This pointer can be used to delete temporary networks when a wpa_cred
+ * that was used to create them is removed. This pointer should not be
+ * dereferences since it may not be updated in all cases.
+ */
+ void *parent_cred;
};
#endif /* CONFIG_SSID_H */
OSDN Git Service
