X-Git-Url: http://git.osdn.net/view?a=blobdiff_plain;f=init.sh;h=21dbb6969184b6b9bdfdeb680862dbeb93adbd5b;hb=b6b3228b44d9c2c8a8750a3a9aa7ae7be4dc8e7e;hp=67e8ceab48208a30a019e39c7da3beaca26a3bb1;hpb=2a143a7c18a102af2ade8b36f681170e0e5acc48;p=android-x86%2Fdevice-generic-common.git

diff --git a/init.sh b/init.sh
index 67e8cea..21dbb69 100644
--- a/init.sh
+++ b/init.sh
@@ -15,6 +15,13 @@ function set_prop_if_empty()
 	[ -z "$(getprop $1)" ] && set_property "$1" "$2"
 }
 
+function rmmod_if_exist()
+{
+	for m in $*; do
+		[ -d /sys/module/$m ] && rmmod $m
+	done
+}
+
 function init_misc()
 {
 	# device information
@@ -30,6 +37,27 @@ function init_misc()
 	# enable sdcardfs if /data is not mounted on tmpfs or 9p
 	mount | grep /data\ | grep -qE 'tmpfs|9p'
 	[ $? -ne 0 ] && modprobe sdcardfs
+
+	# remove wl if it's not used
+	local wifi
+	if [ -d /sys/class/net/wlan0 ]; then
+		wifi=$(basename `readlink /sys/class/net/wlan0/device/driver`)
+		[ "$wifi" != "wl" ] && rmmod_if_exist wl
+	fi
+
+	# enable virt_wifi if needed
+	local eth=`getprop net.virt_wifi eth0`
+	if [ -d /sys/class/net/$eth -a "$VIRT_WIFI" != "0" ]; then
+		if [ -n "$wifi" -a "$VIRT_WIFI" = "1" ]; then
+			rmmod_if_exist iwlmvm $wifi
+		fi
+		if [ ! -d /sys/class/net/wlan0 ]; then
+			ifconfig $eth down
+			ip link set $eth name wifi_eth
+			ifconfig wifi_eth up
+			ip link add link wifi_eth name wlan0 type virt_wifi
+		fi
+	fi
 }
 
 function init_hal_audio()
@@ -38,13 +66,10 @@ function init_hal_audio()
 		VirtualBox*|Bochs*)
 			[ -d /proc/asound/card0 ] || modprobe snd-sb16 isapnp=0 irq=5
 			;;
-		*)
+		TS10*)
+			set_prop_if_empty hal.audio.out pcmC0D2p
 			;;
 	esac
-
-	if grep -qi "IntelHDMI" /proc/asound/card0/id; then
-		[ -d /proc/asound/card1 ] || set_property ro.hardware.audio.primary hdmi
-	fi
 }
 
 function init_hal_bluetooth()
@@ -103,7 +128,18 @@ function init_hal_bluetooth()
 
 function init_hal_camera()
 {
-	return
+	case "$UEVENT" in
+		*e-tabPro*)
+			set_prop_if_empty hal.camera.0 0,270
+			set_prop_if_empty hal.camera.2 1,90
+			;;
+		*LenovoideapadD330*)
+			set_prop_if_empty hal.camera.0 0,90
+			set_prop_if_empty hal.camera.2 1,90
+			;;
+		*)
+			;;
+	esac
 }
 
 function init_hal_gps()
@@ -118,10 +154,8 @@ function set_drm_mode()
 		ET1602*)
 			drm_mode=1366x768
 			;;
-		VMware*)
-			[ -n "$video" ] && drm_mode=$video
-			;;
 		*)
+			[ -n "$video" ] && drm_mode=$video
 			;;
 	esac
 
@@ -130,6 +164,8 @@ function set_drm_mode()
 
 function init_uvesafb()
 {
+	UVESA_MODE=${UVESA_MODE:-${video%@*}}
+
 	case "$PRODUCT" in
 		ET2002*)
 			UVESA_MODE=${UVESA_MODE:-1600x900}
@@ -143,17 +179,18 @@ function init_uvesafb()
 
 function init_hal_gralloc()
 {
+	[ "$VULKAN" = "1" ] && GRALLOC=gbm
+
 	case "$(cat /proc/fb | head -1)" in
-		*virtiodrmfb)
-			if [ "$HWACCEL" != "0" ]; then
-				set_property ro.hardware.hwcomposer drm
-				set_property ro.hardware.gralloc gbm
-			fi
-			set_prop_if_empty sleep.state none
-			;;
-		0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb|0*amdgpudrmfb)
+		*virtio*drmfb|*DRM*emulated)
+			HWC=${HWC:-drm}
+			GRALLOC=${GRALLOC:-gbm}
+			video=${video:-1280x768}
+			;&
+		0*i915drmfb|0*inteldrmfb|0*radeondrmfb|0*nouveau*|0*svgadrmfb|0*amdgpudrmfb)
 			if [ "$HWACCEL" != "0" ]; then
-				set_property ro.hardware.gralloc drm
+				set_property ro.hardware.hwcomposer ${HWC:-}
+				set_property ro.hardware.gralloc ${GRALLOC:-drm}
 				set_drm_mode
 			fi
 			;;
@@ -164,6 +201,7 @@ function init_hal_gralloc()
 			;;
 	esac
 
+	[ -z "$(getprop ro.hardware.gralloc)" ] && set_property ro.hardware.egl swiftshader
 	[ -n "$DEBUG" ] && set_property debug.egl.trace error
 }
 
@@ -173,6 +211,20 @@ function init_hal_hwcomposer()
 	return
 }
 
+function init_hal_vulkan()
+{
+	case "$(cat /proc/fb | head -1)" in
+		0*i915drmfb|0*inteldrmfb)
+			set_property ro.hardware.vulkan android-x86
+			;;
+		0*amdgpudrmfb)
+			set_property ro.hardware.vulkan radv
+			;;
+		*)
+			;;
+	esac
+}
+
 function init_hal_lights()
 {
 	chown 1000.1000 /sys/class/backlight/*/brightness
@@ -186,9 +238,12 @@ function init_hal_power()
 
 	# TODO
 	case "$PRODUCT" in
-		HP*Omni*|OEMB|Surface*3|T10*TA)
+		HP*Omni*|OEMB|Standard*PC*|Surface*3|T10*TA|VMware*)
 			set_prop_if_empty sleep.state none
 			;;
+		e-tab*Pro)
+			set_prop_if_empty sleep.state force
+			;;
 		*)
 			;;
 	esac
@@ -202,7 +257,7 @@ function init_hal_sensors()
 
 	local hal_sensors=kbd
 	local has_sensors=true
-	case "$(cat $DMIPATH/uevent)" in
+	case "$UEVENT" in
 		*Lucid-MWE*)
 			set_property ro.ignore_atkbd 1
 			hal_sensors=hdaps
@@ -259,18 +314,35 @@ function init_hal_sensors()
 			modprobe hdaps
 			hal_sensors=hdaps
 			;;
-		*i7Stylus*|*M80TA*)
+		*LenovoideapadD330*)
+			set_property ro.iio.accel.quirks no-trig
+			set_property ro.iio.accel.order 102
+			;&
+		*LINX1010B*)
+			set_property ro.iio.accel.x.opt_scale -1
+			set_property ro.iio.accel.z.opt_scale -1
+			;;
+		*i7-WN*)
+			set_property ro.iio.accel.quirks no-trig
+			;&
+		*i7Stylus*)
 			set_property ro.iio.accel.x.opt_scale -1
 			;;
-		*ONDATablet*)
+		*LenovoMIIX320*|*ONDATablet*)
 			set_property ro.iio.accel.order 102
 			set_property ro.iio.accel.x.opt_scale -1
 			set_property ro.iio.accel.y.opt_scale -1
 			;;
+		*SP111-33*)
+			set_property ro.iio.accel.quirks no-trig
+			;&
 		*ST70416-6*)
 			set_property ro.iio.accel.order 102
 			;;
-		*T10*TA*|*pnEZpad*)
+		*e-tabPro*|*pnEZpad*|*TECLAST:rntPAD*)
+			set_property ro.iio.accel.quirks no-trig
+			;&
+		*T*0*TA*|*M80TA*)
 			set_property ro.iio.accel.y.opt_scale -1
 			;;
 		*)
@@ -307,11 +379,11 @@ function create_pointercal()
 
 function init_tscal()
 {
-	case "$PRODUCT" in
-		ST70416-6*)
+	case "$UEVENT" in
+		*ST70416-6*)
 			modprobe gslx680_ts_acpi
 			;&
-		T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
+		*T91*|*T101*|*ET2002*|*74499FU*|*945GSE-ITE8712*|*CF-19[CDYFGKLP]*|*TECLAST:rntPAD*)
 			create_pointercal
 			return
 			;;
@@ -333,7 +405,7 @@ function init_tscal()
 
 function init_ril()
 {
-	case "$(cat $DMIPATH/uevent)" in
+	case "$UEVENT" in
 		*TEGA*|*2010:svnIntel:*|*Lucid-MWE*)
 			set_property rild.libpath /system/lib/libhuaweigeneric-ril.so
 			set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
@@ -365,6 +437,7 @@ function do_init()
 	init_hal_gps
 	init_hal_gralloc
 	init_hal_hwcomposer
+	init_hal_vulkan
 	init_hal_lights
 	init_hal_power
 	init_hal_sensors
@@ -420,6 +493,15 @@ function do_bootcomplete()
 			setkeycodes 0x66 172
 			setkeycodes 0x6b 127
 			;;
+		Surface*Go)
+			echo on > /sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/power/control
+			;;
+		VMware*)
+			pm disable com.android.bluetooth
+			;;
+		X80*Power)
+			set_property power.nonboot-cpu-off 1
+			;;
 		*)
 			;;
 	esac
@@ -454,6 +536,7 @@ PATH=/sbin:/system/bin:/system/xbin
 DMIPATH=/sys/class/dmi/id
 BOARD=$(cat $DMIPATH/board_name)
 PRODUCT=$(cat $DMIPATH/product_name)
+UEVENT=$(cat $DMIPATH/uevent)
 
 # import cmdline variables
 for c in `cat /proc/cmdline`; do
@@ -466,8 +549,13 @@ for c in `cat /proc/cmdline`; do
 				case $c in
 					DEBUG=*)
 						[ -n "$DEBUG" ] && set_property debug.logcat 1
+						[ "$DEBUG" = "0" ] || SETUPWIZARD=${SETUPWIZARD:-0}
+						;;
+					DPI=*)
+						set_property ro.sf.lcd_density "$DPI"
 						;;
 				esac
+				[ "$SETUPWIZARD" = "0" ] && set_property ro.setupwizard.mode DISABLED
 			fi
 			;;
 	esac