X-Git-Url: http://git.osdn.net/view?a=blobdiff_plain;f=init.sh;h=ecdce3d9ae4afc652850dfa2afa475c5eeebb86b;hb=905c02633760e06d8765d11e37d8047086861b18;hp=cde8a7cad1c02e609c1fa7f55da886e9711ed403;hpb=341fdf9badbddd3cab563c03519ab7a8e220e169;p=android-x86%2Fdevice-generic-common.git

diff --git a/init.sh b/init.sh
index cde8a7c..ecdce3d 100644
--- a/init.sh
+++ b/init.sh
@@ -15,6 +15,13 @@ function set_prop_if_empty()
 	[ -z "$(getprop $1)" ] && set_property "$1" "$2"
 }
 
+function rmmod_if_exist()
+{
+	for m in $*; do
+		[ -d /sys/module/$m ] && rmmod $m
+	done
+}
+
 function init_misc()
 {
 	# device information
@@ -29,7 +36,28 @@ function init_misc()
 
 	# enable sdcardfs if /data is not mounted on tmpfs or 9p
 	mount | grep /data\ | grep -qE 'tmpfs|9p'
-	[ $? -ne 0 ] && modprobe sdcardfs
+	[ $? -eq 0 ] && set_prop_if_empty ro.sys.sdcardfs false
+
+	# remove wl if it's not used
+	local wifi
+	if [ -d /sys/class/net/wlan0 ]; then
+		wifi=$(basename `readlink /sys/class/net/wlan0/device/driver`)
+		[ "$wifi" != "wl" ] && rmmod_if_exist wl
+	fi
+
+	# enable virt_wifi if needed
+	local eth=`getprop net.virt_wifi eth0`
+	if [ -d /sys/class/net/$eth -a "$VIRT_WIFI" != "0" ]; then
+		if [ -n "$wifi" -a "$VIRT_WIFI" = "1" ]; then
+			rmmod_if_exist iwlmvm $wifi
+		fi
+		if [ ! -d /sys/class/net/wlan0 ]; then
+			ifconfig $eth down
+			ip link set $eth name wifi_eth
+			ifconfig wifi_eth up
+			ip link add link wifi_eth name wlan0 type virt_wifi
+		fi
+	fi
 }
 
 function init_hal_audio()
@@ -55,7 +83,10 @@ function init_hal_bluetooth()
 	done
 
 	case "$PRODUCT" in
-		T10*TA|HP*Omni*)
+		T100TAF)
+			set_property bluetooth.interface hci1
+			;;
+		T10*TA|M80TA|HP*Omni*)
 			BTUART_PORT=/dev/ttyS1
 			set_property hal.bluetooth.uart.proto bcm
 			;;
@@ -100,7 +131,18 @@ function init_hal_bluetooth()
 
 function init_hal_camera()
 {
-	return
+	case "$UEVENT" in
+		*e-tabPro*)
+			set_prop_if_empty hal.camera.0 0,270
+			set_prop_if_empty hal.camera.2 1,90
+			;;
+		*LenovoideapadD330*)
+			set_prop_if_empty hal.camera.0 0,90
+			set_prop_if_empty hal.camera.2 1,90
+			;;
+		*)
+			;;
+	esac
 }
 
 function init_hal_gps()
@@ -115,10 +157,8 @@ function set_drm_mode()
 		ET1602*)
 			drm_mode=1366x768
 			;;
-		VMware*)
-			[ -n "$video" ] && drm_mode=$video
-			;;
 		*)
+			[ -n "$video" ] && drm_mode=$video
 			;;
 	esac
 
@@ -127,6 +167,8 @@ function set_drm_mode()
 
 function init_uvesafb()
 {
+	UVESA_MODE=${UVESA_MODE:-${video%@*}}
+
 	case "$PRODUCT" in
 		ET2002*)
 			UVESA_MODE=${UVESA_MODE:-1600x900}
@@ -145,6 +187,7 @@ function init_hal_gralloc()
 			if [ "$HWACCEL" != "0" ]; then
 				set_property ro.hardware.hwcomposer drm
 				set_property ro.hardware.gralloc gbm
+				set_property debug.drm.mode.force ${video:-1280x800}
 			fi
 			set_prop_if_empty sleep.state none
 			;;
@@ -186,6 +229,9 @@ function init_hal_power()
 		HP*Omni*|OEMB|Surface*3|T10*TA)
 			set_prop_if_empty sleep.state none
 			;;
+		e-tab*Pro)
+			set_prop_if_empty sleep.state force
+			;;
 		*)
 			;;
 	esac
@@ -199,7 +245,7 @@ function init_hal_sensors()
 
 	local hal_sensors=kbd
 	local has_sensors=true
-	case "$(cat $DMIPATH/uevent)" in
+	case "$UEVENT" in
 		*Lucid-MWE*)
 			set_property ro.ignore_atkbd 1
 			hal_sensors=hdaps
@@ -256,22 +302,36 @@ function init_hal_sensors()
 			modprobe hdaps
 			hal_sensors=hdaps
 			;;
-		*i7Stylus*)
-			set_property ro.iio.accel.y.opt_scale -1
+		*LenovoideapadD330*)
+			set_property ro.iio.accel.quirks no-trig
+			set_property ro.iio.accel.order 102
+			;&
+		*LINX1010B*)
+			set_property ro.iio.accel.x.opt_scale -1
 			set_property ro.iio.accel.z.opt_scale -1
 			;;
-		*ONDATablet*)
+		*i7-WN*)
+			set_property ro.iio.accel.quirks no-trig
+			;&
+		*i7Stylus*)
+			set_property ro.iio.accel.x.opt_scale -1
+			;;
+		*LenovoMIIX320*|*ONDATablet*)
 			set_property ro.iio.accel.order 102
+			set_property ro.iio.accel.x.opt_scale -1
+			set_property ro.iio.accel.y.opt_scale -1
 			;;
+		*SP111-33*)
+			set_property ro.iio.accel.quirks no-trig
+			;&
 		*ST70416-6*)
 			set_property ro.iio.accel.order 102
+			;;
+		*e-tabPro*|*pnEZpad*|*TECLAST:rntPAD*)
+			set_property ro.iio.accel.quirks no-trig
 			;&
-		*Surface*3*|*svnOEMB*|*T305CA*|*Venue11Pro5130*|*20FQ*|*20FR*)
+		*T*0*TA*|*M80TA*)
 			set_property ro.iio.accel.y.opt_scale -1
-			;&
-		*T10*TA*)
-			set_property ro.iio.accel.x.opt_scale -1
-			set_property ro.iio.accel.z.opt_scale -1
 			;;
 		*)
 			has_sensors=false
@@ -287,11 +347,11 @@ function init_hal_sensors()
 		hal_sensors=hdaps
 		has_sensors=true
 	elif [ "$hal_sensors" != "kbd" ]; then
-		has_sensors=${HAS_SENSORS:-true}
+		has_sensors=true
 	fi
 
 	set_property ro.hardware.sensors $hal_sensors
-	set_property config.override_forced_orient $has_sensors
+	set_property config.override_forced_orient ${HAS_SENSORS:-$has_sensors}
 }
 
 function create_pointercal()
@@ -307,11 +367,11 @@ function create_pointercal()
 
 function init_tscal()
 {
-	case "$PRODUCT" in
-		ST70416-6*)
+	case "$UEVENT" in
+		*ST70416-6*)
 			modprobe gslx680_ts_acpi
 			;&
-		T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
+		*T91*|*T101*|*ET2002*|*74499FU*|*945GSE-ITE8712*|*CF-19[CDYFGKLP]*|*TECLAST:rntPAD*)
 			create_pointercal
 			return
 			;;
@@ -333,7 +393,7 @@ function init_tscal()
 
 function init_ril()
 {
-	case "$(cat $DMIPATH/uevent)" in
+	case "$UEVENT" in
 		*TEGA*|*2010:svnIntel:*|*Lucid-MWE*)
 			set_property rild.libpath /system/lib/libhuaweigeneric-ril.so
 			set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
@@ -380,6 +440,8 @@ function do_netconsole()
 
 function do_bootcomplete()
 {
+	hciconfig | grep -q hci || pm disable com.android.bluetooth
+
 	init_cpu_governor
 
 	[ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3
@@ -418,6 +480,12 @@ function do_bootcomplete()
 			setkeycodes 0x66 172
 			setkeycodes 0x6b 127
 			;;
+		Surface*Go)
+			echo on > /sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/power/control
+			;;
+		X80*Power)
+			set_property power.nonboot-cpu-off 1
+			;;
 		*)
 			;;
 	esac
@@ -434,13 +502,13 @@ function do_bootcomplete()
 			alsa_amixer -c $c set Headphone on
 			alsa_amixer -c $c set Headphone 100%
 			alsa_amixer -c $c set Speaker 100%
-			alsa_amixer -c $c set Capture 100%
+			alsa_amixer -c $c set Capture 80%
 			alsa_amixer -c $c set Capture cap
-			alsa_amixer -c $c set PCM 100 unmute
+			alsa_amixer -c $c set PCM 100% unmute
 			alsa_amixer -c $c set SPO unmute
 			alsa_amixer -c $c set IEC958 on
-			alsa_amixer -c $c set 'Mic Boost' 3
-			alsa_amixer -c $c set 'Internal Mic Boost' 3
+			alsa_amixer -c $c set 'Mic Boost' 1
+			alsa_amixer -c $c set 'Internal Mic Boost' 1
 		fi
 	done
 
@@ -452,6 +520,7 @@ PATH=/sbin:/system/bin:/system/xbin
 DMIPATH=/sys/class/dmi/id
 BOARD=$(cat $DMIPATH/board_name)
 PRODUCT=$(cat $DMIPATH/product_name)
+UEVENT=$(cat $DMIPATH/uevent)
 
 # import cmdline variables
 for c in `cat /proc/cmdline`; do