OSDN Git Service

USB: ehci: add workaround for Synopsys HC bug
authorGabor Juhos <juhosg@openwrt.org>
Wed, 13 Apr 2011 08:54:23 +0000 (10:54 +0200)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 13 Apr 2011 23:58:18 +0000 (16:58 -0700)
commit2f7ac6c199978d0a0e407a12534201aa675a6482
tree1423b565f0c7fdff0ddaed5c343bcc96e9953cd2
parent502fa84195f47a79d7220470ebaa85a773659755
USB: ehci: add workaround for Synopsys HC bug

A Synopsys USB core used in various SoCs has a bug which might cause
that the host controller not issuing ping.

When software uses the Doorbell mechanism to remove queue heads, the
host controller still has references to the removed queue head even
after indicating an Interrupt on Async Advance. This happens if the last
executed queue head's Next Link queue head is removed.

Consequences of the defect:
The Host controller fetches the removed queue head, using memory that
would otherwise be deallocated.This results in incorrect transactions on
both the USB and system memory. This may result in undefined behavior.

Workarounds:

1) If no queue head is active (no Status field's Active bit is set)
after removing the queue heads, the software can write one of the valid
queue head addresses to the ASYNCLISTADDR register and deallocate the
removed queue head's memory after 2 microframes.

If one or more of the queue heads is active (the Active bit is set in
the Status field) after removing the queue heads, the software can delay
memory deallocation after time X, where X is the time required for the
Host Controller to go through all the queue heads once. X varies with
the number of queue heads and the time required to process periodic
transactions: if more periodic transactions must be performed, the Host
Controller has less time to process asynchronous transaction processing.

2) Do not use the Doorbell mechanism to remove the queue heads. Disable
the Asynchronous Schedule Enable bit instead.

The bug has been discussed on the linux-usb-devel mailing-list
four years ago, the original thread can be found here:
http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg45345.html

This patch implements the first workaround as suggested by David Brownell.

The built-in USB host controller of the Atheros AR7130/AR7141/AR7161 SoCs
requires this to work properly.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/ehci-ath79.c
drivers/usb/host/ehci-q.c
drivers/usb/host/ehci.h