wlcore: Fixup "Add support for optional wakeirq"
After commit
3c83dd577c7f ("wlcore: Add support for optional
wakeirq") landed upstream, I started seeing the following oops
on my HiKey board:
[ 1.870279] Unable to handle kernel read from unreadable memory at virtual address
0000000000000010
[ 1.870283] Mem abort info:
[ 1.870287] ESR = 0x96000005
[ 1.870292] Exception class = DABT (current EL), IL = 32 bits
[ 1.870296] SET = 0, FnV = 0
[ 1.870299] EA = 0, S1PTW = 0
[ 1.870302] Data abort info:
[ 1.870306] ISV = 0, ISS = 0x00000005
[ 1.870309] CM = 0, WnR = 0
[ 1.870312] [
0000000000000010] user address but active_mm is swapper
[ 1.870318] Internal error: Oops:
96000005 [#1] PREEMPT SMP
[ 1.870327] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted
4.19.0-05129-gb3d1e8e #48
[ 1.870331] Hardware name: HiKey Development Board (DT)
[ 1.870350] Workqueue: events_freezable mmc_rescan
[ 1.870358] pstate:
60400005 (nZCv daif +PAN -UAO)
[ 1.870366] pc : wl1271_probe+0x210/0x350
[ 1.870371] lr : wl1271_probe+0x210/0x350
[ 1.870374] sp :
ffffff80080739b0
[ 1.870377] x29:
ffffff80080739b0 x28:
0000000000000000
[ 1.870384] x27:
0000000000000000 x26:
0000000000000000
[ 1.870391] x25:
0000000000000036 x24:
ffffffc074ecb598
[ 1.870398] x23:
ffffffc07ffdce78 x22:
ffffffc0744ed808
[ 1.870404] x21:
ffffffc074ecbb98 x20:
ffffff8008ff9000
[ 1.870411] x19:
ffffffc0744ed800 x18:
ffffff8008ff9a48
[ 1.870418] x17:
0000000000000000 x16:
0000000000000000
[ 1.870425] x15:
ffffffc074ecb503 x14:
ffffffffffffffff
[ 1.870431] x13:
ffffffc074ecb502 x12:
0000000000000030
[ 1.870438] x11:
0101010101010101 x10:
0000000000000040
[ 1.870444] x9 :
ffffffc075400248 x8 :
ffffffc075400270
[ 1.870451] x7 :
0000000000000000 x6 :
0000000000000000
[ 1.870457] x5 :
0000000000000000 x4 :
0000000000000000
[ 1.870463] x3 :
0000000000000000 x2 :
0000000000000000
[ 1.870469] x1 :
0000000000000028 x0 :
0000000000000000
[ 1.870477] Process kworker/0:0 (pid: 5, stack limit = 0x(____ptrval____))
[ 1.870480] Call trace:
[ 1.870485] wl1271_probe+0x210/0x350
[ 1.870491] sdio_bus_probe+0x100/0x128
[ 1.870500] really_probe+0x1a8/0x2b8
[ 1.870506] driver_probe_device+0x58/0x100
[ 1.870511] __device_attach_driver+0x94/0xd8
[ 1.870517] bus_for_each_drv+0x70/0xc8
[ 1.870522] __device_attach+0xe0/0x140
[ 1.870527] device_initial_probe+0x10/0x18
[ 1.870532] bus_probe_device+0x94/0xa0
[ 1.870537] device_add+0x374/0x5b8
[ 1.870542] sdio_add_func+0x60/0x88
[ 1.870546] mmc_attach_sdio+0x1b0/0x358
[ 1.870551] mmc_rescan+0x2cc/0x390
[ 1.870558] process_one_work+0x12c/0x320
[ 1.870563] worker_thread+0x48/0x458
[ 1.870569] kthread+0xf8/0x128
[ 1.870575] ret_from_fork+0x10/0x18
[ 1.870583] Code:
92400c21 b2760021 a90687a2 97e95bf9 (
f9400803)
[ 1.870587] ---[ end trace
1e15f81d3c139ca9 ]---
It seems since we don't have a wakeirq value in the dts, the wakeirq
value in wl1271_probe() is zero, which then causes trouble in
irqd_get_trigger_type(irq_get_irq_data(wakeirq)).
This patch tries to address this by checking if wakeirq is zero,
and not trying to add it to the resources if that is the case.
Fixes:
3c83dd577c7f ("wlcore: Add support for optional wakeirq")
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Eyal Reizer <eyalr@ti.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: linux-wireless@vger.kernel.org
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>