ath10k: debugfs support to get final TPC stats for 10.4 variants

ath10k: debugfs support to get final TPC stats for 10.4 variants

Export the final Transmit Power Control (TPC) value, which is the
minimum of control power and existing TPC value to user space via
a new debugfs file "tpc_stats_final" to help with debugging.
It works with the new wmi cmd and event introduced in 10.4 firmware
branch.

WMI command ID: WMI_PDEV_GET_TPC_TABLE_CMDID
WMI event ID: WMI_PDEV_TPC_TABLE_EVENTID

cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final

$ cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final

TPC config for channel 5180 mode 10

CTL             =  0x 0 Reg. Domain             = 58
Antenna Gain    =  0 Reg. Max Antenna Gain      =   0
Power Limit     = 60 Reg. Max Power             = 60
Num tx chains   =  2 Num supported rates        = 109

******************* CDD POWER TABLE ****************

No.  Preamble Rate_code tpc_value1 tpc_value2 tpc_value3
0    CCK      0x40        0          0
1    CCK      0x41        0          0
[...]
107  HTCUP    0x 0       46          46
108  HTCUP    0x 0       46          46

******************* STBC POWER TABLE ****************

No.  Preamble Rate_code tpc_value1 tpc_value2 tpc_value3
0    CCK      0x40        0          0
1    CCK      0x41        0          0
[...]
107  HTCUP    0x 0        46         46
108  HTCUP    0x 0        46         46

***********************************
TXBF not supported
**********************************

The existing tpc_stats debugfs file provides the dump
which is minimum of target power and regulatory domain.

cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats

Hardware_used: QCA4019
Firmware version: firmware-5.bin_10.4-3.0-00209

Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>