btrfs: send: optimize clone detection to increase extent sharing

btrfs: send: optimize clone detection to increase extent sharing

Currently send does not do the best decisions when it comes to decide
between multiple clone sources, which results in clone operations for
partial extent ranges, which has the following disadvantages:

1) We get less shared extents at the destination;

2) We have to read more data during the send operation and emit more
   write commands.

Besides not being optimal behaviour, it also breaks user expectations and
is often reported by users, with a recent example in the Link tag at the
bottom of this change log.

Part of the reason for this non-optimal behaviour is that the backref
walking code does not provide information about the length of the file
extent items that were found for each backref, so send is blind about
which backref is the best to chose as a cloning source.

The other existing reasons are just silliness, namely always prefering
the inode with the lowest number when multiple are found for the same
root and when we can clone from multiple roots, always prefer the send
root over any of the other clone roots. This does not make any sense
since any inode or root is fine and as good as any other inode/root.

Fix this by making backref walking pass information about the number of
bytes referenced by each file extent item and then have send's backref
callback pick the inode with the highest number of bytes for each root.
Finally select the root from which we can clone more bytes from.

Example reproducer:

   $ cat test.sh
   #!/bin/bash

   DEV=/dev/sdi
   MNT=/mnt/sdi

   mkfs.btrfs -f $DEV
   mount $DEV $MNT

   xfs_io -f -c "pwrite -S 0xab -b 2M 0 2M" $MNT/foo
   cp --reflink=always $MNT/foo $MNT/bar
   cp --reflink=always $MNT/foo $MNT/baz
   sync

   # Overwrite the second half of file foo.
   xfs_io -c "pwrite -S 0xcd -b 1M 1M 1M" $MNT/foo
   sync

   echo
   echo "*** fiemap in the original filesystem ***"
   echo
   xfs_io -c "fiemap -v" $MNT/foo
   xfs_io -c "fiemap -v" $MNT/bar
   xfs_io -c "fiemap -v" $MNT/baz
   echo

   btrfs filesystem du $MNT

   btrfs subvolume snapshot -r $MNT $MNT/snap

   btrfs send -f /tmp/send_stream $MNT/snap

   umount $MNT
   mkfs.btrfs -f $DEV &> /dev/null
   mount $DEV $MNT

   btrfs receive -f /tmp/send_stream $MNT

   echo
   echo "*** fiemap in the new filesystem ***"
   echo
   xfs_io -r -c "fiemap -v" $MNT/snap/foo
   xfs_io -r -c "fiemap -v" $MNT/snap/bar
   xfs_io -r -c "fiemap -v" $MNT/snap/baz
   echo

   btrfs filesystem du $MNT

   rm -f /tmp/send_stream
   rm -f /tmp/snap.fssum

   umount $MNT

Before this change:

   $ ./test.sh
   (...)

   *** fiemap in the original filesystem ***

   /mnt/sdi/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    30720..32767      2048   0x1
   /mnt/sdi/bar:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001
   /mnt/sdi/baz:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001

        Total   Exclusive  Set shared  Filename
      2.00MiB     1.00MiB           -  /mnt/sdi/foo
      2.00MiB       0.00B           -  /mnt/sdi/bar
      2.00MiB       0.00B           -  /mnt/sdi/baz
      6.00MiB     1.00MiB     2.00MiB  /mnt/sdi

   Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap'
   At subvol /mnt/sdi/snap
   At subvol snap

   *** fiemap in the new filesystem ***

   /mnt/sdi/snap/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001
   /mnt/sdi/snap/bar:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    30720..32767      2048   0x1
   /mnt/sdi/snap/baz:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    32768..34815      2048   0x1

        Total   Exclusive  Set shared  Filename
      2.00MiB       0.00B           -  /mnt/sdi/snap/foo
      2.00MiB     1.00MiB           -  /mnt/sdi/snap/bar
      2.00MiB     1.00MiB           -  /mnt/sdi/snap/baz
      6.00MiB     2.00MiB           -  /mnt/sdi/snap
      6.00MiB     2.00MiB     2.00MiB  /mnt/sdi

We end up with two 1M extents that are not shared for files bar and baz.

After this change:

   $ ./test.sh
   (...)

   *** fiemap in the original filesystem ***

   /mnt/sdi/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    30720..32767      2048   0x1
   /mnt/sdi/bar:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001
   /mnt/sdi/baz:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001

        Total   Exclusive  Set shared  Filename
      2.00MiB     1.00MiB           -  /mnt/sdi/foo
      2.00MiB       0.00B           -  /mnt/sdi/bar
      2.00MiB       0.00B           -  /mnt/sdi/baz
      6.00MiB     1.00MiB     2.00MiB  /mnt/sdi
   Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap'
   At subvol /mnt/sdi/snap
   At subvol snap

   *** fiemap in the new filesystem ***

   /mnt/sdi/snap/foo:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..4095]:       26624..30719      4096 0x2001
   /mnt/sdi/snap/bar:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    30720..32767      2048 0x2001
   /mnt/sdi/snap/baz:
    EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
      0: [0..2047]:       26624..28671      2048 0x2000
      1: [2048..4095]:    30720..32767      2048 0x2001

        Total   Exclusive  Set shared  Filename
      2.00MiB       0.00B           -  /mnt/sdi/snap/foo
      2.00MiB       0.00B           -  /mnt/sdi/snap/bar
      2.00MiB       0.00B           -  /mnt/sdi/snap/baz
      6.00MiB       0.00B           -  /mnt/sdi/snap
      6.00MiB       0.00B     3.00MiB  /mnt/sdi

Now there's a much better sharing, files bar and baz share 1M of the
extent of file foo and the second extent of files bar and baz is shared
between themselves.

This will later be turned into a test case for fstests.

Link: https://lore.kernel.org/linux-btrfs/20221008005704.795b44b0@crass-HP-ZBook-15-G2/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>