OSDN Git Service

Bluetooth: Allow SCO/eSCO packet type selection for outgoing SCO connections.
authorNick Pelly <npelly@google.com>
Thu, 11 Feb 2010 19:54:28 +0000 (11:54 -0800)
committerJaikumar Ganesh <jaikumar@google.com>
Tue, 24 May 2011 03:13:51 +0000 (20:13 -0700)
commitd3fe42fee0045f41ffd11f03e16a0bbb53c83271
treef2bf7e2c130cadbe8ba129be79c30bd56681ec95
parent38a97168ef107a4e34e87ae276c10e922a2db396
Bluetooth: Allow SCO/eSCO packet type selection for outgoing SCO connections.

__u16 sco_pkt_type is introduced to struct sockaddr_sco. It allows bitwise
selection of SCO/eSCO packet types. Currently those bits are:

0x0001 HV1 may be used.
0x0002 HV2 may be used.
0x0004 HV3 may be used.
0x0008 EV3 may be used.
0x0010 EV4 may be used.
0x0020 EV5 may be used.
0x0040 2-EV3 may be used.
0x0080 3-EV3 may be used.
0x0100 2-EV5 may be used.
0x0200 3-EV5 may be used.

This is similar to the Packet Type parameter in the HCI Setup Synchronous
Connection Command, except that we are not reversing the logic on the EDR bits.
This makes the use of sco_pkt_tpye forward portable for the use case of
white-listing packet types, which we expect will be the primary use case.

If sco_pkt_type is zero, or userspace uses the old struct sockaddr_sco,
then the default behavior is to allow all packet types.

Packet type selection is just a request made to the Bluetooth chipset, and
it is up to the link manager on the chipset to negiotiate and decide on the
actual packet types used. Furthermore, when a SCO/eSCO connection is eventually
made there is no way for the host stack to determine which packet type was used
(however it is possible to get the link type of SCO or eSCO).

sco_pkt_type is ignored for incoming SCO connections. It is possible
to add this in the future as a parameter to the Accept Synchronous Connection
Command, however its a little trickier because the kernel does not
currently preserve sockaddr_sco data between userspace calls to accept().

The most common use for sco_pkt_type will be to white-list only SCO packets,
which can be done with the hci.h constant SCO_ESCO_MASK.

This patch is motivated by broken Bluetooth carkits such as the Motorolo
HF850 (it claims to support eSCO, but will actually reject eSCO connections
after 5 seconds) and the 2007/2008 Infiniti G35/37 (fails to route audio
if a 2-EV5 packet type is negiotiated). With this patch userspace can maintain
a list of compatible packet types to workaround remote devices such as these.

Based on a patch by Marcel Holtmann.

Rebased to 2.6.39.

Change-Id: Ide1c89574fa4f6f1b9218282e1af17051eb86315
Signed-off-by: Nick Pelly <npelly@google.com>
include/net/bluetooth/hci.h
include/net/bluetooth/hci_core.h
include/net/bluetooth/sco.h
net/bluetooth/hci_conn.c
net/bluetooth/hci_event.c
net/bluetooth/l2cap_core.c
net/bluetooth/mgmt.c
net/bluetooth/sco.c