OSDN Git Service

net: mscc: ocelot: configure watermarks using devlink-sb
authorVladimir Oltean <vladimir.oltean@nxp.com>
Fri, 15 Jan 2021 02:11:20 +0000 (04:11 +0200)
committerJakub Kicinski <kuba@kernel.org>
Sat, 16 Jan 2021 04:02:35 +0000 (20:02 -0800)
commitf59fd9cab7305266f4148776c3b66329551a2a3a
treee5985aceec4f8ed86f8665daf0520bf14130d79c
parenta4ae997adcbdf8ead133bafa5e9e2d6925c576b6
net: mscc: ocelot: configure watermarks using devlink-sb

Using devlink-sb, we can configure 12/16 (the important 75%) of the
switch's controlling watermarks for congestion drops, and we can monitor
50% of the watermark occupancies (we can monitor the reservation
watermarks, but not the sharing watermarks, which are exposed as pool
sizes).

The following definitions can be made:

SB_BUF=0 # The devlink-sb for frame buffers
SB_REF=1 # The devlink-sb for frame references
POOL_ING=0 # The pool for ingress traffic. Both devlink-sb instances
           # have one of these.
POOL_EGR=1 # The pool for egress traffic. Both devlink-sb instances
           # have one of these.

Editing the hardware watermarks is done in the following way:
BUF_xxxx_I is accessed when sb=$SB_BUF and pool=$POOL_ING
REF_xxxx_I is accessed when sb=$SB_REF and pool=$POOL_ING
BUF_xxxx_E is accessed when sb=$SB_BUF and pool=$POOL_EGR
REF_xxxx_E is accessed when sb=$SB_REF and pool=$POOL_EGR

Configuring the sharing watermarks for COL_SHR(dp=0) is done implicitly
by modifying the corresponding pool size. By default, the pool size has
maximum size, so this can be skipped.

devlink sb pool set pci/0000:00:00.5 sb $SB_BUF pool $POOL_ING \
size 129840 thtype static

Since by default there is no buffer reservation, the above command has
maxed out BUF_COL_SHR_I(dp=0).

Configuring the per-port reservation watermark (P_RSRV) is done in the
following way:

devlink sb port pool set pci/0000:00:00.5/0 sb $SB_BUF \
pool $POOL_ING th 1000

The above command sets BUF_P_RSRV_I(port 0) to 1000 bytes. After this
command, the sharing watermarks are internally reconfigured with 1000
bytes less, i.e. from 129840 bytes to 128840 bytes.

Configuring the per-port-tc reservation watermarks (Q_RSRV) is done in
the following way:

for tc in {0..7}; do
devlink sb tc bind set pci/0000:00:00.5/0 sb 0 tc $tc \
type ingress pool $POOL_ING \
th 3000
done

The above command sets BUF_Q_RSRV_I(port 0, tc 0..7) to 3000 bytes.
The sharing watermarks are again reconfigured with 24000 bytes less.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/dsa/ocelot/felix.c
drivers/net/ethernet/mscc/ocelot.c
drivers/net/ethernet/mscc/ocelot.h
drivers/net/ethernet/mscc/ocelot_devlink.c
drivers/net/ethernet/mscc/ocelot_net.c
drivers/net/ethernet/mscc/ocelot_vsc7514.c
include/soc/mscc/ocelot.h