--- /dev/null
+/*
+ * This file was generated automatically by gen-mterp.py for 'mips64'.
+ *
+ * --> DO NOT EDIT <--
+ */
+
+/* File: mips64/header.S */
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <machine/regdef.h>
+
+/* TODO: add the missing file and use its FP register definitions. */
+/* #include <machine/fpregdef.h> */
+/* FP register definitions */
+#define f0 $f0
+#define f1 $f1
+#define f2 $f2
+#define f3 $f3
+#define f12 $f12
+#define f13 $f13
+
+/*
+ * It looks like the GNU assembler currently does not support the blec and bgtc
+ * idioms, which should translate into bgec and bltc respectively with swapped
+ * left and right register operands.
+ * TODO: remove these macros when the assembler is fixed.
+ */
+.macro blec lreg, rreg, target
+ bgec \rreg, \lreg, \target
+.endm
+.macro bgtc lreg, rreg, target
+ bltc \rreg, \lreg, \target
+.endm
+
+/*
+Mterp and MIPS64 notes:
+
+The following registers have fixed assignments:
+
+ reg nick purpose
+ s0 rPC interpreted program counter, used for fetching instructions
+ s1 rFP interpreted frame pointer, used for accessing locals and args
+ s2 rSELF self (Thread) pointer
+ s3 rINST first 16-bit code unit of current instruction
+ s4 rIBASE interpreted instruction base pointer, used for computed goto
+ s5 rREFS base of object references in shadow frame (ideally, we'll get rid of this later).
+*/
+
+/* During bringup, we'll use the shadow frame model instead of rFP */
+/* single-purpose registers, given names for clarity */
+#define rPC s0
+#define rFP s1
+#define rSELF s2
+#define rINST s3
+#define rIBASE s4
+#define rREFS s5
+
+/*
+ * This is a #include, not a %include, because we want the C pre-processor
+ * to expand the macros into assembler assignment statements.
+ */
+#include "asm_support.h"
+
+/*
+ * Instead of holding a pointer to the shadow frame, we keep rFP at the base of the vregs. So,
+ * to access other shadow frame fields, we need to use a backwards offset. Define those here.
+ */
+#define OFF_FP(a) (a - SHADOWFRAME_VREGS_OFFSET)
+#define OFF_FP_NUMBER_OF_VREGS OFF_FP(SHADOWFRAME_NUMBER_OF_VREGS_OFFSET)
+#define OFF_FP_DEX_PC OFF_FP(SHADOWFRAME_DEX_PC_OFFSET)
+#define OFF_FP_LINK OFF_FP(SHADOWFRAME_LINK_OFFSET)
+#define OFF_FP_METHOD OFF_FP(SHADOWFRAME_METHOD_OFFSET)
+#define OFF_FP_RESULT_REGISTER OFF_FP(SHADOWFRAME_RESULT_REGISTER_OFFSET)
+#define OFF_FP_DEX_PC_PTR OFF_FP(SHADOWFRAME_DEX_PC_PTR_OFFSET)
+#define OFF_FP_CODE_ITEM OFF_FP(SHADOWFRAME_CODE_ITEM_OFFSET)
+#define OFF_FP_SHADOWFRAME (-SHADOWFRAME_VREGS_OFFSET)
+
+/*
+ *
+ * The reference interpreter performs explicit suspect checks, which is somewhat wasteful.
+ * Dalvik's interpreter folded suspend checks into the jump table mechanism, and eventually
+ * mterp should do so as well.
+ */
+#define MTERP_SUSPEND 0
+
+#define MTERP_LOGGING 0
+
+/*
+ * "export" the PC to dex_pc field in the shadow frame, f/b/o future exception objects. Must
+ * be done *before* something throws.
+ *
+ * It's okay to do this more than once.
+ *
+ * NOTE: the fast interpreter keeps track of dex pc as a direct pointer to the mapped
+ * dex byte codes. However, the rest of the runtime expects dex pc to be an instruction
+ * offset into the code_items_[] array. For effiency, we will "export" the
+ * current dex pc as a direct pointer using the EXPORT_PC macro, and rely on GetDexPC
+ * to convert to a dex pc when needed.
+ */
+.macro EXPORT_PC
+ sd rPC, OFF_FP_DEX_PC_PTR(rFP)
+.endm
+
+/*
+ * Refresh handler table.
+ */
+.macro REFRESH_IBASE
+ ld rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF)
+.endm
+
+/*
+ * Fetch the next instruction from rPC into rINST. Does not advance rPC.
+ */
+.macro FETCH_INST
+ lhu rINST, 0(rPC)
+.endm
+
+/* Advance rPC by some number of code units. */
+.macro ADVANCE count
+ daddu rPC, rPC, (\count) * 2
+.endm
+
+/*
+ * Fetch the next instruction from the specified offset. Advances rPC
+ * to point to the next instruction.
+ *
+ * This must come AFTER anything that can throw an exception, or the
+ * exception catch may miss. (This also implies that it must come after
+ * EXPORT_PC.)
+ */
+.macro FETCH_ADVANCE_INST count
+ ADVANCE \count
+ FETCH_INST
+.endm
+
+/*
+ * Similar to FETCH_ADVANCE_INST, but does not update rPC. Used to load
+ * rINST ahead of possible exception point. Be sure to manually advance rPC
+ * later.
+ */
+.macro PREFETCH_INST count
+ lhu rINST, ((\count) * 2)(rPC)
+.endm
+
+/*
+ * Put the instruction's opcode field into the specified register.
+ */
+.macro GET_INST_OPCODE reg
+ and \reg, rINST, 255
+.endm
+
+/*
+ * Begin executing the opcode in _reg.
+ */
+.macro GOTO_OPCODE reg
+ .set noat
+ sll AT, \reg, 7
+ daddu AT, rIBASE, AT
+ jic AT, 0
+ .set at
+.endm
+
+/*
+ * Get/set the 32-bit value from a Dalvik register.
+ * Note, GET_VREG does sign extension to 64 bits while
+ * GET_VREG_U does zero extension to 64 bits.
+ * One is useful for arithmetic while the other is
+ * useful for storing the result value as 64-bit.
+ */
+.macro GET_VREG reg, vreg
+ .set noat
+ dlsa AT, \vreg, rFP, 2
+ lw \reg, 0(AT)
+ .set at
+.endm
+.macro GET_VREG_U reg, vreg
+ .set noat
+ dlsa AT, \vreg, rFP, 2
+ lwu \reg, 0(AT)
+ .set at
+.endm
+.macro GET_VREG_FLOAT reg, vreg
+ .set noat
+ dlsa AT, \vreg, rFP, 2
+ lwc1 \reg, 0(AT)
+ .set at
+.endm
+.macro SET_VREG reg, vreg
+ .set noat
+ dlsa AT, \vreg, rFP, 2
+ sw \reg, 0(AT)
+ dlsa AT, \vreg, rREFS, 2
+ sw zero, 0(AT)
+ .set at
+.endm
+.macro SET_VREG_OBJECT reg, vreg
+ .set noat
+ dlsa AT, \vreg, rFP, 2
+ sw \reg, 0(AT)
+ dlsa AT, \vreg, rREFS, 2
+ sw \reg, 0(AT)
+ .set at
+.endm
+.macro SET_VREG_FLOAT reg, vreg
+ .set noat
+ dlsa AT, \vreg, rFP, 2
+ swc1 \reg, 0(AT)
+ dlsa AT, \vreg, rREFS, 2
+ sw zero, 0(AT)
+ .set at
+.endm
+
+/*
+ * Get/set the 64-bit value from a Dalvik register.
+ * Avoid unaligned memory accesses.
+ * Note, SET_VREG_WIDE clobbers the register containing the value being stored.
+ * Note, SET_VREG_DOUBLE clobbers the register containing the Dalvik register number.
+ */
+.macro GET_VREG_WIDE reg, vreg
+ .set noat
+ dlsa AT, \vreg, rFP, 2
+ lw \reg, 0(AT)
+ lw AT, 4(AT)
+ dinsu \reg, AT, 32, 32
+ .set at
+.endm
+.macro GET_VREG_DOUBLE reg, vreg
+ .set noat
+ dlsa AT, \vreg, rFP, 2
+ lwc1 \reg, 0(AT)
+ lw AT, 4(AT)
+ mthc1 AT, \reg
+ .set at
+.endm
+.macro SET_VREG_WIDE reg, vreg
+ .set noat
+ dlsa AT, \vreg, rFP, 2
+ sw \reg, 0(AT)
+ drotr32 \reg, \reg, 0
+ sw \reg, 4(AT)
+ dlsa AT, \vreg, rREFS, 2
+ sw zero, 0(AT)
+ sw zero, 4(AT)
+ .set at
+.endm
+.macro SET_VREG_DOUBLE reg, vreg
+ .set noat
+ dlsa AT, \vreg, rREFS, 2
+ sw zero, 0(AT)
+ sw zero, 4(AT)
+ dlsa AT, \vreg, rFP, 2
+ swc1 \reg, 0(AT)
+ mfhc1 \vreg, \reg
+ sw \vreg, 4(AT)
+ .set at
+.endm
+
+/*
+ * On-stack offsets for spilling/unspilling callee-saved registers
+ * and the frame size.
+ */
+#define STACK_OFFSET_RA 0
+#define STACK_OFFSET_GP 8
+#define STACK_OFFSET_S0 16
+#define STACK_OFFSET_S1 24
+#define STACK_OFFSET_S2 32
+#define STACK_OFFSET_S3 40
+#define STACK_OFFSET_S4 48
+#define STACK_OFFSET_S5 56
+#define STACK_SIZE 64
+
+/* Constants for float/double_to_int/long conversions */
+#define INT_MIN 0x80000000
+#define INT_MIN_AS_FLOAT 0xCF000000
+#define INT_MIN_AS_DOUBLE 0xC1E0000000000000
+#define LONG_MIN 0x8000000000000000
+#define LONG_MIN_AS_FLOAT 0xDF000000
+#define LONG_MIN_AS_DOUBLE 0xC3E0000000000000
+
+/* File: mips64/entry.S */
+/*
+ * Copyright (C) 2016 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Interpreter entry point.
+ */
+
+ .set reorder
+
+ .text
+ .global ExecuteMterpImpl
+ .type ExecuteMterpImpl, %function
+ .balign 16
+/*
+ * On entry:
+ * a0 Thread* self
+ * a1 code_item
+ * a2 ShadowFrame
+ * a3 JValue* result_register
+ *
+ */
+ExecuteMterpImpl:
+ .cfi_startproc
+ .cpsetup t9, t8, ExecuteMterpImpl
+
+ .cfi_def_cfa sp, 0
+ daddu sp, sp, -STACK_SIZE
+ .cfi_adjust_cfa_offset STACK_SIZE
+
+ sd t8, STACK_OFFSET_GP(sp)
+ .cfi_rel_offset 28, STACK_OFFSET_GP
+ sd ra, STACK_OFFSET_RA(sp)
+ .cfi_rel_offset 31, STACK_OFFSET_RA
+
+ sd s0, STACK_OFFSET_S0(sp)
+ .cfi_rel_offset 16, STACK_OFFSET_S0
+ sd s1, STACK_OFFSET_S1(sp)
+ .cfi_rel_offset 17, STACK_OFFSET_S1
+ sd s2, STACK_OFFSET_S2(sp)
+ .cfi_rel_offset 18, STACK_OFFSET_S2
+ sd s3, STACK_OFFSET_S3(sp)
+ .cfi_rel_offset 19, STACK_OFFSET_S3
+ sd s4, STACK_OFFSET_S4(sp)
+ .cfi_rel_offset 20, STACK_OFFSET_S4
+ sd s5, STACK_OFFSET_S5(sp)
+ .cfi_rel_offset 21, STACK_OFFSET_S5
+
+ /* Remember the return register */
+ sd a3, SHADOWFRAME_RESULT_REGISTER_OFFSET(a2)
+
+ /* Remember the code_item */
+ sd a1, SHADOWFRAME_CODE_ITEM_OFFSET(a2)
+
+ /* set up "named" registers */
+ move rSELF, a0
+ daddu rFP, a2, SHADOWFRAME_VREGS_OFFSET
+ lw v0, SHADOWFRAME_NUMBER_OF_VREGS_OFFSET(a2)
+ dlsa rREFS, v0, rFP, 2
+ daddu rPC, a1, CODEITEM_INSNS_OFFSET
+ lw v0, SHADOWFRAME_DEX_PC_OFFSET(a2)
+ dlsa rPC, v0, rPC, 1
+ EXPORT_PC
+
+ /* Starting ibase */
+ REFRESH_IBASE
+
+ /* start executing the instruction at rPC */
+ FETCH_INST
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+ /* NOTE: no fallthrough */
+
+
+ .global artMterpAsmInstructionStart
+ .type artMterpAsmInstructionStart, %function
+artMterpAsmInstructionStart = .L_op_nop
+ .text
+
+/* ------------------------------ */
+ .balign 128
+.L_op_nop: /* 0x00 */
+/* File: mips64/op_nop.S */
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move: /* 0x01 */
+/* File: mips64/op_move.S */
+ /* for move, move-object, long-to-int */
+ /* op vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_VREG a0, a3 # a0 <- vB
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ .if 0
+ SET_VREG_OBJECT a0, a2 # vA <- vB
+ .else
+ SET_VREG a0, a2 # vA <- vB
+ .endif
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_from16: /* 0x02 */
+/* File: mips64/op_move_from16.S */
+ /* for: move/from16, move-object/from16 */
+ /* op vAA, vBBBB */
+ lhu a3, 2(rPC) # a3 <- BBBB
+ srl a2, rINST, 8 # a2 <- AA
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_VREG a0, a3 # a0 <- vBBBB
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ .if 0
+ SET_VREG_OBJECT a0, a2 # vAA <- vBBBB
+ .else
+ SET_VREG a0, a2 # vAA <- vBBBB
+ .endif
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_16: /* 0x03 */
+/* File: mips64/op_move_16.S */
+ /* for: move/16, move-object/16 */
+ /* op vAAAA, vBBBB */
+ lhu a3, 4(rPC) # a3 <- BBBB
+ lhu a2, 2(rPC) # a2 <- AAAA
+ FETCH_ADVANCE_INST 3 # advance rPC, load rINST
+ GET_VREG a0, a3 # a0 <- vBBBB
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ .if 0
+ SET_VREG_OBJECT a0, a2 # vAAAA <- vBBBB
+ .else
+ SET_VREG a0, a2 # vAAAA <- vBBBB
+ .endif
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_wide: /* 0x04 */
+/* File: mips64/op_move_wide.S */
+ /* move-wide vA, vB */
+ /* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
+ ext a3, rINST, 12, 4 # a3 <- B
+ ext a2, rINST, 8, 4 # a2 <- A
+ GET_VREG_WIDE a0, a3 # a0 <- vB
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- vB
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_wide_from16: /* 0x05 */
+/* File: mips64/op_move_wide_from16.S */
+ /* move-wide/from16 vAA, vBBBB */
+ /* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
+ lhu a3, 2(rPC) # a3 <- BBBB
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG_WIDE a0, a3 # a0 <- vBBBB
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vAA <- vBBBB
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_wide_16: /* 0x06 */
+/* File: mips64/op_move_wide_16.S */
+ /* move-wide/16 vAAAA, vBBBB */
+ /* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
+ lhu a3, 4(rPC) # a3 <- BBBB
+ lhu a2, 2(rPC) # a2 <- AAAA
+ GET_VREG_WIDE a0, a3 # a0 <- vBBBB
+ FETCH_ADVANCE_INST 3 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vAAAA <- vBBBB
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_object: /* 0x07 */
+/* File: mips64/op_move_object.S */
+/* File: mips64/op_move.S */
+ /* for move, move-object, long-to-int */
+ /* op vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_VREG a0, a3 # a0 <- vB
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ .if 1
+ SET_VREG_OBJECT a0, a2 # vA <- vB
+ .else
+ SET_VREG a0, a2 # vA <- vB
+ .endif
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_object_from16: /* 0x08 */
+/* File: mips64/op_move_object_from16.S */
+/* File: mips64/op_move_from16.S */
+ /* for: move/from16, move-object/from16 */
+ /* op vAA, vBBBB */
+ lhu a3, 2(rPC) # a3 <- BBBB
+ srl a2, rINST, 8 # a2 <- AA
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_VREG a0, a3 # a0 <- vBBBB
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ .if 1
+ SET_VREG_OBJECT a0, a2 # vAA <- vBBBB
+ .else
+ SET_VREG a0, a2 # vAA <- vBBBB
+ .endif
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_object_16: /* 0x09 */
+/* File: mips64/op_move_object_16.S */
+/* File: mips64/op_move_16.S */
+ /* for: move/16, move-object/16 */
+ /* op vAAAA, vBBBB */
+ lhu a3, 4(rPC) # a3 <- BBBB
+ lhu a2, 2(rPC) # a2 <- AAAA
+ FETCH_ADVANCE_INST 3 # advance rPC, load rINST
+ GET_VREG a0, a3 # a0 <- vBBBB
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ .if 1
+ SET_VREG_OBJECT a0, a2 # vAAAA <- vBBBB
+ .else
+ SET_VREG a0, a2 # vAAAA <- vBBBB
+ .endif
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_result: /* 0x0a */
+/* File: mips64/op_move_result.S */
+ /* for: move-result, move-result-object */
+ /* op vAA */
+ srl a2, rINST, 8 # a2 <- AA
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ ld a0, OFF_FP_RESULT_REGISTER(rFP) # get pointer to result JType
+ lw a0, 0(a0) # a0 <- result.i
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ .if 0
+ SET_VREG_OBJECT a0, a2 # vAA <- result
+ .else
+ SET_VREG a0, a2 # vAA <- result
+ .endif
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_result_wide: /* 0x0b */
+/* File: mips64/op_move_result_wide.S */
+ /* for: move-result-wide */
+ /* op vAA */
+ srl a2, rINST, 8 # a2 <- AA
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ ld a0, OFF_FP_RESULT_REGISTER(rFP) # get pointer to result JType
+ ld a0, 0(a0) # a0 <- result.j
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vAA <- result
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_result_object: /* 0x0c */
+/* File: mips64/op_move_result_object.S */
+/* File: mips64/op_move_result.S */
+ /* for: move-result, move-result-object */
+ /* op vAA */
+ srl a2, rINST, 8 # a2 <- AA
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ ld a0, OFF_FP_RESULT_REGISTER(rFP) # get pointer to result JType
+ lw a0, 0(a0) # a0 <- result.i
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ .if 1
+ SET_VREG_OBJECT a0, a2 # vAA <- result
+ .else
+ SET_VREG a0, a2 # vAA <- result
+ .endif
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_move_exception: /* 0x0d */
+/* File: mips64/op_move_exception.S */
+ /* move-exception vAA */
+ srl a2, rINST, 8 # a2 <- AA
+ ld a0, THREAD_EXCEPTION_OFFSET(rSELF) # load exception obj
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ SET_VREG_OBJECT a0, a2 # vAA <- exception obj
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ sd zero, THREAD_EXCEPTION_OFFSET(rSELF) # clear exception
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_return_void: /* 0x0e */
+/* File: mips64/op_return_void.S */
+ .extern MterpThreadFenceForConstructor
+ .extern MterpSuspendCheck
+ jal MterpThreadFenceForConstructor
+ lw ra, THREAD_FLAGS_OFFSET(rSELF)
+ move a0, rSELF
+ and ra, ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
+ beqzc ra, 1f
+ jal MterpSuspendCheck # (self)
+1:
+ li a0, 0
+ b MterpReturn
+
+/* ------------------------------ */
+ .balign 128
+.L_op_return: /* 0x0f */
+/* File: mips64/op_return.S */
+ /*
+ * Return a 32-bit value.
+ *
+ * for: return, return-object
+ */
+ /* op vAA */
+ .extern MterpThreadFenceForConstructor
+ .extern MterpSuspendCheck
+ jal MterpThreadFenceForConstructor
+ lw ra, THREAD_FLAGS_OFFSET(rSELF)
+ move a0, rSELF
+ and ra, ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
+ beqzc ra, 1f
+ jal MterpSuspendCheck # (self)
+1:
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG_U a0, a2 # a0 <- vAA
+ b MterpReturn
+
+/* ------------------------------ */
+ .balign 128
+.L_op_return_wide: /* 0x10 */
+/* File: mips64/op_return_wide.S */
+ /*
+ * Return a 64-bit value.
+ */
+ /* return-wide vAA */
+ /* op vAA */
+ .extern MterpThreadFenceForConstructor
+ .extern MterpSuspendCheck
+ jal MterpThreadFenceForConstructor
+ lw ra, THREAD_FLAGS_OFFSET(rSELF)
+ move a0, rSELF
+ and ra, ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
+ beqzc ra, 1f
+ jal MterpSuspendCheck # (self)
+1:
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG_WIDE a0, a2 # a0 <- vAA
+ b MterpReturn
+
+/* ------------------------------ */
+ .balign 128
+.L_op_return_object: /* 0x11 */
+/* File: mips64/op_return_object.S */
+/* File: mips64/op_return.S */
+ /*
+ * Return a 32-bit value.
+ *
+ * for: return, return-object
+ */
+ /* op vAA */
+ .extern MterpThreadFenceForConstructor
+ .extern MterpSuspendCheck
+ jal MterpThreadFenceForConstructor
+ lw ra, THREAD_FLAGS_OFFSET(rSELF)
+ move a0, rSELF
+ and ra, ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
+ beqzc ra, 1f
+ jal MterpSuspendCheck # (self)
+1:
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG_U a0, a2 # a0 <- vAA
+ b MterpReturn
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const_4: /* 0x12 */
+/* File: mips64/op_const_4.S */
+ /* const/4 vA, #+B */
+ ext a2, rINST, 8, 4 # a2 <- A
+ seh a0, rINST # sign extend B in rINST
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ sra a0, a0, 12 # shift B into its final position
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- +B
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const_16: /* 0x13 */
+/* File: mips64/op_const_16.S */
+ /* const/16 vAA, #+BBBB */
+ srl a2, rINST, 8 # a2 <- AA
+ lh a0, 2(rPC) # a0 <- sign-extended BBBB
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- +BBBB
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const: /* 0x14 */
+/* File: mips64/op_const.S */
+ /* const vAA, #+BBBBbbbb */
+ srl a2, rINST, 8 # a2 <- AA
+ lh a0, 2(rPC) # a0 <- bbbb (low)
+ lh a1, 4(rPC) # a1 <- BBBB (high)
+ FETCH_ADVANCE_INST 3 # advance rPC, load rINST
+ ins a0, a1, 16, 16 # a0 = BBBBbbbb
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- +BBBBbbbb
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const_high16: /* 0x15 */
+/* File: mips64/op_const_high16.S */
+ /* const/high16 vAA, #+BBBB0000 */
+ srl a2, rINST, 8 # a2 <- AA
+ lh a0, 2(rPC) # a0 <- BBBB
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ sll a0, a0, 16 # a0 <- BBBB0000
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- +BBBB0000
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const_wide_16: /* 0x16 */
+/* File: mips64/op_const_wide_16.S */
+ /* const-wide/16 vAA, #+BBBB */
+ srl a2, rINST, 8 # a2 <- AA
+ lh a0, 2(rPC) # a0 <- sign-extended BBBB
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vAA <- +BBBB
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const_wide_32: /* 0x17 */
+/* File: mips64/op_const_wide_32.S */
+ /* const-wide/32 vAA, #+BBBBbbbb */
+ srl a2, rINST, 8 # a2 <- AA
+ lh a0, 2(rPC) # a0 <- bbbb (low)
+ lh a1, 4(rPC) # a1 <- BBBB (high)
+ FETCH_ADVANCE_INST 3 # advance rPC, load rINST
+ ins a0, a1, 16, 16 # a0 = BBBBbbbb
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vAA <- +BBBBbbbb
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const_wide: /* 0x18 */
+/* File: mips64/op_const_wide.S */
+ /* const-wide vAA, #+HHHHhhhhBBBBbbbb */
+ srl a4, rINST, 8 # a4 <- AA
+ lh a0, 2(rPC) # a0 <- bbbb (low)
+ lh a1, 4(rPC) # a1 <- BBBB (low middle)
+ lh a2, 6(rPC) # a2 <- hhhh (high middle)
+ lh a3, 8(rPC) # a3 <- HHHH (high)
+ FETCH_ADVANCE_INST 5 # advance rPC, load rINST
+ ins a0, a1, 16, 16 # a0 = BBBBbbbb
+ ins a2, a3, 16, 16 # a2 = HHHHhhhh
+ dinsu a0, a2, 32, 32 # a0 = HHHHhhhhBBBBbbbb
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- +HHHHhhhhBBBBbbbb
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const_wide_high16: /* 0x19 */
+/* File: mips64/op_const_wide_high16.S */
+ /* const-wide/high16 vAA, #+BBBB000000000000 */
+ srl a2, rINST, 8 # a2 <- AA
+ lh a0, 2(rPC) # a0 <- BBBB
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ dsll32 a0, a0, 16 # a0 <- BBBB000000000000
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vAA <- +BBBB000000000000
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const_string: /* 0x1a */
+/* File: mips64/op_const_string.S */
+ /* const/string vAA, String//BBBB */
+ .extern MterpConstString
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- BBBB
+ srl a1, rINST, 8 # a1 <- AA
+ daddu a2, rFP, OFF_FP_SHADOWFRAME
+ move a3, rSELF
+ jal MterpConstString # (index, tgt_reg, shadow_frame, self)
+ PREFETCH_INST 2 # load rINST
+ bnez v0, MterpPossibleException # let reference interpreter deal with it.
+ ADVANCE 2 # advance rPC
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const_string_jumbo: /* 0x1b */
+/* File: mips64/op_const_string_jumbo.S */
+ /* const/string vAA, String//BBBBBBBB */
+ .extern MterpConstString
+ EXPORT_PC
+ lh a0, 2(rPC) # a0 <- bbbb (low)
+ lh a4, 4(rPC) # a4 <- BBBB (high)
+ srl a1, rINST, 8 # a1 <- AA
+ ins a0, a4, 16, 16 # a0 <- BBBBbbbb
+ daddu a2, rFP, OFF_FP_SHADOWFRAME
+ move a3, rSELF
+ jal MterpConstString # (index, tgt_reg, shadow_frame, self)
+ PREFETCH_INST 3 # load rINST
+ bnez v0, MterpPossibleException # let reference interpreter deal with it.
+ ADVANCE 3 # advance rPC
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_const_class: /* 0x1c */
+/* File: mips64/op_const_class.S */
+ /* const/class vAA, Class//BBBB */
+ .extern MterpConstClass
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- BBBB
+ srl a1, rINST, 8 # a1 <- AA
+ daddu a2, rFP, OFF_FP_SHADOWFRAME
+ move a3, rSELF
+ jal MterpConstClass # (index, tgt_reg, shadow_frame, self)
+ PREFETCH_INST 2 # load rINST
+ bnez v0, MterpPossibleException # let reference interpreter deal with it.
+ ADVANCE 2 # advance rPC
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_monitor_enter: /* 0x1d */
+/* File: mips64/op_monitor_enter.S */
+ /*
+ * Synchronize on an object.
+ */
+ /* monitor-enter vAA */
+ .extern artLockObjectFromCode
+ EXPORT_PC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG_U a0, a2 # a0 <- vAA (object)
+ move a1, rSELF # a1 <- self
+ jal artLockObjectFromCode
+ bnezc v0, MterpException
+ FETCH_ADVANCE_INST 1
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_monitor_exit: /* 0x1e */
+/* File: mips64/op_monitor_exit.S */
+ /*
+ * Unlock an object.
+ *
+ * Exceptions that occur when unlocking a monitor need to appear as
+ * if they happened at the following instruction. See the Dalvik
+ * instruction spec.
+ */
+ /* monitor-exit vAA */
+ .extern artUnlockObjectFromCode
+ EXPORT_PC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG_U a0, a2 # a0 <- vAA (object)
+ move a1, rSELF # a1 <- self
+ jal artUnlockObjectFromCode # v0 <- success for unlock(self, obj)
+ bnezc v0, MterpException
+ FETCH_ADVANCE_INST 1 # before throw: advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_check_cast: /* 0x1f */
+/* File: mips64/op_check_cast.S */
+ /*
+ * Check to see if a cast from one class to another is allowed.
+ */
+ /* check-cast vAA, class//BBBB */
+ .extern MterpCheckCast
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- BBBB
+ srl a1, rINST, 8 # a1 <- AA
+ dlsa a1, a1, rFP, 2 # a1 <- &object
+ ld a2, OFF_FP_METHOD(rFP) # a2 <- method
+ move a3, rSELF # a3 <- self
+ jal MterpCheckCast # (index, &obj, method, self)
+ PREFETCH_INST 2
+ bnez v0, MterpPossibleException
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_instance_of: /* 0x20 */
+/* File: mips64/op_instance_of.S */
+ /*
+ * Check to see if an object reference is an instance of a class.
+ *
+ * Most common situation is a non-null object, being compared against
+ * an already-resolved class.
+ */
+ /* instance-of vA, vB, class//CCCC */
+ .extern MterpInstanceOf
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- CCCC
+ srl a1, rINST, 12 # a1 <- B
+ dlsa a1, a1, rFP, 2 # a1 <- &object
+ ld a2, OFF_FP_METHOD(rFP) # a2 <- method
+ move a3, rSELF # a3 <- self
+ jal MterpInstanceOf # (index, &obj, method, self)
+ ld a1, THREAD_EXCEPTION_OFFSET(rSELF)
+ ext a2, rINST, 8, 4 # a2 <- A
+ PREFETCH_INST 2
+ bnez a1, MterpException
+ ADVANCE 2 # advance rPC
+ SET_VREG v0, a2 # vA <- v0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_array_length: /* 0x21 */
+/* File: mips64/op_array_length.S */
+ /*
+ * Return the length of an array.
+ */
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a0, a1 # a0 <- vB (object ref)
+ ext a2, rINST, 8, 4 # a2 <- A
+ beqz a0, common_errNullObject # yup, fail
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- array length
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a3, a2 # vB <- length
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_new_instance: /* 0x22 */
+/* File: mips64/op_new_instance.S */
+ /*
+ * Create a new instance of a class.
+ */
+ /* new-instance vAA, class//BBBB */
+ .extern MterpNewInstance
+ EXPORT_PC
+ daddu a0, rFP, OFF_FP_SHADOWFRAME
+ move a1, rSELF
+ move a2, rINST
+ jal MterpNewInstance # (shadow_frame, self, inst_data)
+ beqzc v0, MterpPossibleException
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_new_array: /* 0x23 */
+/* File: mips64/op_new_array.S */
+ /*
+ * Allocate an array of objects, specified with the array class
+ * and a count.
+ *
+ * The verifier guarantees that this is an array class, so we don't
+ * check for it here.
+ */
+ /* new-array vA, vB, class//CCCC */
+ .extern MterpNewArray
+ EXPORT_PC
+ daddu a0, rFP, OFF_FP_SHADOWFRAME
+ move a1, rPC
+ move a2, rINST
+ move a3, rSELF
+ jal MterpNewArray
+ beqzc v0, MterpPossibleException
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_filled_new_array: /* 0x24 */
+/* File: mips64/op_filled_new_array.S */
+ /*
+ * Create a new array with elements filled from registers.
+ *
+ * for: filled-new-array, filled-new-array/range
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class//CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, type//BBBB */
+ .extern MterpFilledNewArray
+ EXPORT_PC
+ daddu a0, rFP, OFF_FP_SHADOWFRAME
+ move a1, rPC
+ move a2, rSELF
+ jal MterpFilledNewArray
+ beqzc v0, MterpPossibleException
+ FETCH_ADVANCE_INST 3 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_filled_new_array_range: /* 0x25 */
+/* File: mips64/op_filled_new_array_range.S */
+/* File: mips64/op_filled_new_array.S */
+ /*
+ * Create a new array with elements filled from registers.
+ *
+ * for: filled-new-array, filled-new-array/range
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class//CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, type//BBBB */
+ .extern MterpFilledNewArrayRange
+ EXPORT_PC
+ daddu a0, rFP, OFF_FP_SHADOWFRAME
+ move a1, rPC
+ move a2, rSELF
+ jal MterpFilledNewArrayRange
+ beqzc v0, MterpPossibleException
+ FETCH_ADVANCE_INST 3 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_fill_array_data: /* 0x26 */
+/* File: mips64/op_fill_array_data.S */
+ /* fill-array-data vAA, +BBBBBBBB */
+ .extern MterpFillArrayData
+ EXPORT_PC
+ lh a1, 2(rPC) # a1 <- bbbb (lo)
+ lh a0, 4(rPC) # a0 <- BBBB (hi)
+ srl a3, rINST, 8 # a3 <- AA
+ ins a1, a0, 16, 16 # a1 <- BBBBbbbb
+ GET_VREG_U a0, a3 # a0 <- vAA (array object)
+ dlsa a1, a1, rPC, 1 # a1 <- PC + BBBBbbbb*2 (array data off.)
+ jal MterpFillArrayData # (obj, payload)
+ beqzc v0, MterpPossibleException # exception?
+ FETCH_ADVANCE_INST 3 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_throw: /* 0x27 */
+/* File: mips64/op_throw.S */
+ /*
+ * Throw an exception object in the current thread.
+ */
+ /* throw vAA */
+ EXPORT_PC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG_U a0, a2 # a0 <- vAA (exception object)
+ beqzc a0, common_errNullObject
+ sd a0, THREAD_EXCEPTION_OFFSET(rSELF) # thread->exception <- obj
+ b MterpException
+
+/* ------------------------------ */
+ .balign 128
+.L_op_goto: /* 0x28 */
+/* File: mips64/op_goto.S */
+ /*
+ * Unconditional branch, 8-bit offset.
+ *
+ * The branch distance is a signed code-unit offset, which we need to
+ * double to get a byte offset.
+ */
+ /* goto +AA */
+ srl a0, rINST, 8
+ seb a0, a0 # a0 <- sign-extended AA
+ dlsa rPC, a0, rPC, 1 # rPC <- rPC + AA * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a0, 1f # AA * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+1:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a0, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_goto_16: /* 0x29 */
+/* File: mips64/op_goto_16.S */
+ /*
+ * Unconditional branch, 16-bit offset.
+ *
+ * The branch distance is a signed code-unit offset, which we need to
+ * double to get a byte offset.
+ */
+ /* goto/16 +AAAA */
+ lh a0, 2(rPC) # a0 <- sign-extended AAAA
+ dlsa rPC, a0, rPC, 1 # rPC <- rPC + AAAA * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a0, 1f # AA * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+1:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a0, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_goto_32: /* 0x2a */
+/* File: mips64/op_goto_32.S */
+ /*
+ * Unconditional branch, 32-bit offset.
+ *
+ * The branch distance is a signed code-unit offset, which we need to
+ * double to get a byte offset.
+ *
+ * Unlike most opcodes, this one is allowed to branch to itself, so
+ * our "backward branch" test must be "<=0" instead of "<0".
+ */
+ /* goto/32 +AAAAAAAA */
+ lh a0, 2(rPC) # a0 <- aaaa (low)
+ lh a1, 4(rPC) # a1 <- AAAA (high)
+ ins a0, a1, 16, 16 # a0 = sign-extended AAAAaaaa
+ dlsa rPC, a0, rPC, 1 # rPC <- rPC + AAAAAAAA * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgtz a0, 1f # AA * 2 > 0 => no suspend check
+ REFRESH_IBASE
+1:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ blez a0, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_packed_switch: /* 0x2b */
+/* File: mips64/op_packed_switch.S */
+ /*
+ * Handle a packed-switch or sparse-switch instruction. In both cases
+ * we decode it and hand it off to a helper function.
+ *
+ * We don't really expect backward branches in a switch statement, but
+ * they're perfectly legal, so we check for them here.
+ *
+ * for: packed-switch, sparse-switch
+ */
+ /* op vAA, +BBBBBBBB */
+ .extern MterpDoPackedSwitch
+ lh a0, 2(rPC) # a0 <- bbbb (lo)
+ lh a1, 4(rPC) # a1 <- BBBB (hi)
+ srl a3, rINST, 8 # a3 <- AA
+ ins a0, a1, 16, 16 # a0 <- BBBBbbbb
+ GET_VREG a1, a3 # a1 <- vAA
+ dlsa a0, a0, rPC, 1 # a0 <- PC + BBBBbbbb*2
+ jal MterpDoPackedSwitch # v0 <- code-unit branch offset
+ dlsa rPC, v0, rPC, 1 # rPC <- rPC + offset * 2
+ FETCH_INST # load rINST
+#if MTERP_SUSPEND
+ bgtz v0, 1f # offset * 2 > 0 => no suspend check
+ REFRESH_IBASE
+1:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ blez v0, MterpCheckSuspendAndContinue
+#endif
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sparse_switch: /* 0x2c */
+/* File: mips64/op_sparse_switch.S */
+/* File: mips64/op_packed_switch.S */
+ /*
+ * Handle a packed-switch or sparse-switch instruction. In both cases
+ * we decode it and hand it off to a helper function.
+ *
+ * We don't really expect backward branches in a switch statement, but
+ * they're perfectly legal, so we check for them here.
+ *
+ * for: packed-switch, sparse-switch
+ */
+ /* op vAA, +BBBBBBBB */
+ .extern MterpDoSparseSwitch
+ lh a0, 2(rPC) # a0 <- bbbb (lo)
+ lh a1, 4(rPC) # a1 <- BBBB (hi)
+ srl a3, rINST, 8 # a3 <- AA
+ ins a0, a1, 16, 16 # a0 <- BBBBbbbb
+ GET_VREG a1, a3 # a1 <- vAA
+ dlsa a0, a0, rPC, 1 # a0 <- PC + BBBBbbbb*2
+ jal MterpDoSparseSwitch # v0 <- code-unit branch offset
+ dlsa rPC, v0, rPC, 1 # rPC <- rPC + offset * 2
+ FETCH_INST # load rINST
+#if MTERP_SUSPEND
+ bgtz v0, 1f # offset * 2 > 0 => no suspend check
+ REFRESH_IBASE
+1:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ blez v0, MterpCheckSuspendAndContinue
+#endif
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_cmpl_float: /* 0x2d */
+/* File: mips64/op_cmpl_float.S */
+/* File: mips64/fcmp.S */
+ /*
+ * Compare two floating-point values. Puts 0, 1, or -1 into the
+ * destination register based on the results of the comparison.
+ *
+ * For: cmpl-float, cmpg-float
+ */
+ /* op vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_FLOAT f0, a2 # f0 <- vBB
+ GET_VREG_FLOAT f1, a3 # f1 <- vCC
+ cmp.eq.s f2, f0, f1
+ li a0, 0
+ bc1nez f2, 1f # done if vBB == vCC (ordered)
+ .if 0
+ cmp.lt.s f2, f0, f1
+ li a0, -1
+ bc1nez f2, 1f # done if vBB < vCC (ordered)
+ li a0, 1 # vBB > vCC or unordered
+ .else
+ cmp.lt.s f2, f1, f0
+ li a0, 1
+ bc1nez f2, 1f # done if vBB > vCC (ordered)
+ li a0, -1 # vBB < vCC or unordered
+ .endif
+1:
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_cmpg_float: /* 0x2e */
+/* File: mips64/op_cmpg_float.S */
+/* File: mips64/fcmp.S */
+ /*
+ * Compare two floating-point values. Puts 0, 1, or -1 into the
+ * destination register based on the results of the comparison.
+ *
+ * For: cmpl-float, cmpg-float
+ */
+ /* op vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_FLOAT f0, a2 # f0 <- vBB
+ GET_VREG_FLOAT f1, a3 # f1 <- vCC
+ cmp.eq.s f2, f0, f1
+ li a0, 0
+ bc1nez f2, 1f # done if vBB == vCC (ordered)
+ .if 1
+ cmp.lt.s f2, f0, f1
+ li a0, -1
+ bc1nez f2, 1f # done if vBB < vCC (ordered)
+ li a0, 1 # vBB > vCC or unordered
+ .else
+ cmp.lt.s f2, f1, f0
+ li a0, 1
+ bc1nez f2, 1f # done if vBB > vCC (ordered)
+ li a0, -1 # vBB < vCC or unordered
+ .endif
+1:
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_cmpl_double: /* 0x2f */
+/* File: mips64/op_cmpl_double.S */
+/* File: mips64/fcmpWide.S */
+ /*
+ * Compare two floating-point values. Puts 0, 1, or -1 into the
+ * destination register based on the results of the comparison.
+ *
+ * For: cmpl-double, cmpg-double
+ */
+ /* op vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_DOUBLE f0, a2 # f0 <- vBB
+ GET_VREG_DOUBLE f1, a3 # f1 <- vCC
+ cmp.eq.d f2, f0, f1
+ li a0, 0
+ bc1nez f2, 1f # done if vBB == vCC (ordered)
+ .if 0
+ cmp.lt.d f2, f0, f1
+ li a0, -1
+ bc1nez f2, 1f # done if vBB < vCC (ordered)
+ li a0, 1 # vBB > vCC or unordered
+ .else
+ cmp.lt.d f2, f1, f0
+ li a0, 1
+ bc1nez f2, 1f # done if vBB > vCC (ordered)
+ li a0, -1 # vBB < vCC or unordered
+ .endif
+1:
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_cmpg_double: /* 0x30 */
+/* File: mips64/op_cmpg_double.S */
+/* File: mips64/fcmpWide.S */
+ /*
+ * Compare two floating-point values. Puts 0, 1, or -1 into the
+ * destination register based on the results of the comparison.
+ *
+ * For: cmpl-double, cmpg-double
+ */
+ /* op vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_DOUBLE f0, a2 # f0 <- vBB
+ GET_VREG_DOUBLE f1, a3 # f1 <- vCC
+ cmp.eq.d f2, f0, f1
+ li a0, 0
+ bc1nez f2, 1f # done if vBB == vCC (ordered)
+ .if 1
+ cmp.lt.d f2, f0, f1
+ li a0, -1
+ bc1nez f2, 1f # done if vBB < vCC (ordered)
+ li a0, 1 # vBB > vCC or unordered
+ .else
+ cmp.lt.d f2, f1, f0
+ li a0, 1
+ bc1nez f2, 1f # done if vBB > vCC (ordered)
+ li a0, -1 # vBB < vCC or unordered
+ .endif
+1:
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_cmp_long: /* 0x31 */
+/* File: mips64/op_cmp_long.S */
+ /* cmp-long vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ slt a2, a0, a1
+ slt a0, a1, a0
+ subu a0, a0, a2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- result
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_eq: /* 0x32 */
+/* File: mips64/op_if_eq.S */
+/* File: mips64/bincmp.S */
+ /*
+ * Generic two-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-le" you would use "le".
+ *
+ * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
+ */
+ /* if-cmp vA, vB, +CCCC */
+ lh a4, 2(rPC) # a4 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+
+ beqc a0, a1, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + CCCC * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # CCCC * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_ne: /* 0x33 */
+/* File: mips64/op_if_ne.S */
+/* File: mips64/bincmp.S */
+ /*
+ * Generic two-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-le" you would use "le".
+ *
+ * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
+ */
+ /* if-cmp vA, vB, +CCCC */
+ lh a4, 2(rPC) # a4 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+
+ bnec a0, a1, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + CCCC * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # CCCC * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_lt: /* 0x34 */
+/* File: mips64/op_if_lt.S */
+/* File: mips64/bincmp.S */
+ /*
+ * Generic two-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-le" you would use "le".
+ *
+ * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
+ */
+ /* if-cmp vA, vB, +CCCC */
+ lh a4, 2(rPC) # a4 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+
+ bltc a0, a1, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + CCCC * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # CCCC * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_ge: /* 0x35 */
+/* File: mips64/op_if_ge.S */
+/* File: mips64/bincmp.S */
+ /*
+ * Generic two-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-le" you would use "le".
+ *
+ * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
+ */
+ /* if-cmp vA, vB, +CCCC */
+ lh a4, 2(rPC) # a4 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+
+ bgec a0, a1, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + CCCC * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # CCCC * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_gt: /* 0x36 */
+/* File: mips64/op_if_gt.S */
+/* File: mips64/bincmp.S */
+ /*
+ * Generic two-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-le" you would use "le".
+ *
+ * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
+ */
+ /* if-cmp vA, vB, +CCCC */
+ lh a4, 2(rPC) # a4 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+
+ bgtc a0, a1, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + CCCC * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # CCCC * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_le: /* 0x37 */
+/* File: mips64/op_if_le.S */
+/* File: mips64/bincmp.S */
+ /*
+ * Generic two-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-le" you would use "le".
+ *
+ * For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
+ */
+ /* if-cmp vA, vB, +CCCC */
+ lh a4, 2(rPC) # a4 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+
+ blec a0, a1, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + CCCC * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # CCCC * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_eqz: /* 0x38 */
+/* File: mips64/op_if_eqz.S */
+/* File: mips64/zcmp.S */
+ /*
+ * Generic one-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-lez" you would use "le".
+ *
+ * For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
+ */
+ /* if-cmp vAA, +BBBB */
+ lh a4, 2(rPC) # a4 <- sign-extended BBBB
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a2 # a0 <- vAA
+
+ beqzc a0, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + BBBB * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # BBBB * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_nez: /* 0x39 */
+/* File: mips64/op_if_nez.S */
+/* File: mips64/zcmp.S */
+ /*
+ * Generic one-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-lez" you would use "le".
+ *
+ * For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
+ */
+ /* if-cmp vAA, +BBBB */
+ lh a4, 2(rPC) # a4 <- sign-extended BBBB
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a2 # a0 <- vAA
+
+ bnezc a0, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + BBBB * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # BBBB * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_ltz: /* 0x3a */
+/* File: mips64/op_if_ltz.S */
+/* File: mips64/zcmp.S */
+ /*
+ * Generic one-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-lez" you would use "le".
+ *
+ * For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
+ */
+ /* if-cmp vAA, +BBBB */
+ lh a4, 2(rPC) # a4 <- sign-extended BBBB
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a2 # a0 <- vAA
+
+ bltzc a0, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + BBBB * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # BBBB * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_gez: /* 0x3b */
+/* File: mips64/op_if_gez.S */
+/* File: mips64/zcmp.S */
+ /*
+ * Generic one-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-lez" you would use "le".
+ *
+ * For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
+ */
+ /* if-cmp vAA, +BBBB */
+ lh a4, 2(rPC) # a4 <- sign-extended BBBB
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a2 # a0 <- vAA
+
+ bgezc a0, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + BBBB * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # BBBB * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_gtz: /* 0x3c */
+/* File: mips64/op_if_gtz.S */
+/* File: mips64/zcmp.S */
+ /*
+ * Generic one-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-lez" you would use "le".
+ *
+ * For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
+ */
+ /* if-cmp vAA, +BBBB */
+ lh a4, 2(rPC) # a4 <- sign-extended BBBB
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a2 # a0 <- vAA
+
+ bgtzc a0, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + BBBB * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # BBBB * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_if_lez: /* 0x3d */
+/* File: mips64/op_if_lez.S */
+/* File: mips64/zcmp.S */
+ /*
+ * Generic one-operand compare-and-branch operation. Provide a "condition"
+ * fragment that specifies the comparison to perform, e.g. for
+ * "if-lez" you would use "le".
+ *
+ * For: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
+ */
+ /* if-cmp vAA, +BBBB */
+ lh a4, 2(rPC) # a4 <- sign-extended BBBB
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a2 # a0 <- vAA
+
+ blezc a0, 1f
+ li a4, 2 # offset if branch not taken
+1:
+
+ dlsa rPC, a4, rPC, 1 # rPC <- rPC + BBBB * 2
+ FETCH_INST # load rINST
+
+#if MTERP_SUSPEND
+ bgez a4, 2f # BBBB * 2 >= 0 => no suspend check
+ REFRESH_IBASE
+2:
+#else
+ lw ra, THREAD_FLAGS_OFFSET(rSELF) # Preload flags for MterpCheckSuspendAndContinue
+ bltz a4, MterpCheckSuspendAndContinue
+#endif
+
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_3e: /* 0x3e */
+/* File: mips64/op_unused_3e.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_3f: /* 0x3f */
+/* File: mips64/op_unused_3f.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_40: /* 0x40 */
+/* File: mips64/op_unused_40.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_41: /* 0x41 */
+/* File: mips64/op_unused_41.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_42: /* 0x42 */
+/* File: mips64/op_unused_42.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_43: /* 0x43 */
+/* File: mips64/op_unused_43.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aget: /* 0x44 */
+/* File: mips64/op_aget.S */
+ /*
+ * Array get, 32 bits or less. vAA <- vBB[vCC].
+ *
+ * for: aget, aget-boolean, aget-byte, aget-char, aget-short
+ *
+ * NOTE: assumes data offset for arrays is the same for all non-wide types.
+ * If this changes, specialize.
+ */
+ /* op vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ .if 2
+ # [d]lsa does not support shift count of 0.
+ dlsa a0, a1, a0, 2 # a0 <- arrayObj + index*width
+ .else
+ daddu a0, a1, a0 # a0 <- arrayObj + index*width
+ .endif
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ lw a2, MIRROR_INT_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a2, a4 # vAA <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aget_wide: /* 0x45 */
+/* File: mips64/op_aget_wide.S */
+ /*
+ * Array get, 64 bits. vAA <- vBB[vCC].
+ *
+ */
+ /* aget-wide vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ dlsa a0, a1, a0, 3 # a0 <- arrayObj + index*width
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ lw a2, MIRROR_WIDE_ARRAY_DATA_OFFSET(a0)
+ lw a3, (MIRROR_WIDE_ARRAY_DATA_OFFSET+4)(a0)
+ dinsu a2, a3, 32, 32 # a2 <- vBB[vCC]
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a2, a4 # vAA <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aget_object: /* 0x46 */
+/* File: mips64/op_aget_object.S */
+ /*
+ * Array object get. vAA <- vBB[vCC].
+ *
+ * for: aget-object
+ */
+ /* op vAA, vBB, vCC */
+ .extern artAGetObjectFromMterp
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ EXPORT_PC
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ jal artAGetObjectFromMterp # (array, index)
+ ld a1, THREAD_EXCEPTION_OFFSET(rSELF)
+ srl a4, rINST, 8 # a4 <- AA
+ PREFETCH_INST 2
+ bnez a1, MterpException
+ SET_VREG_OBJECT v0, a4 # vAA <- v0
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aget_boolean: /* 0x47 */
+/* File: mips64/op_aget_boolean.S */
+/* File: mips64/op_aget.S */
+ /*
+ * Array get, 32 bits or less. vAA <- vBB[vCC].
+ *
+ * for: aget, aget-boolean, aget-byte, aget-char, aget-short
+ *
+ * NOTE: assumes data offset for arrays is the same for all non-wide types.
+ * If this changes, specialize.
+ */
+ /* op vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ .if 0
+ # [d]lsa does not support shift count of 0.
+ dlsa a0, a1, a0, 0 # a0 <- arrayObj + index*width
+ .else
+ daddu a0, a1, a0 # a0 <- arrayObj + index*width
+ .endif
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ lbu a2, MIRROR_BOOLEAN_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a2, a4 # vAA <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aget_byte: /* 0x48 */
+/* File: mips64/op_aget_byte.S */
+/* File: mips64/op_aget.S */
+ /*
+ * Array get, 32 bits or less. vAA <- vBB[vCC].
+ *
+ * for: aget, aget-boolean, aget-byte, aget-char, aget-short
+ *
+ * NOTE: assumes data offset for arrays is the same for all non-wide types.
+ * If this changes, specialize.
+ */
+ /* op vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ .if 0
+ # [d]lsa does not support shift count of 0.
+ dlsa a0, a1, a0, 0 # a0 <- arrayObj + index*width
+ .else
+ daddu a0, a1, a0 # a0 <- arrayObj + index*width
+ .endif
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ lb a2, MIRROR_BYTE_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a2, a4 # vAA <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aget_char: /* 0x49 */
+/* File: mips64/op_aget_char.S */
+/* File: mips64/op_aget.S */
+ /*
+ * Array get, 32 bits or less. vAA <- vBB[vCC].
+ *
+ * for: aget, aget-boolean, aget-byte, aget-char, aget-short
+ *
+ * NOTE: assumes data offset for arrays is the same for all non-wide types.
+ * If this changes, specialize.
+ */
+ /* op vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ .if 1
+ # [d]lsa does not support shift count of 0.
+ dlsa a0, a1, a0, 1 # a0 <- arrayObj + index*width
+ .else
+ daddu a0, a1, a0 # a0 <- arrayObj + index*width
+ .endif
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ lhu a2, MIRROR_CHAR_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a2, a4 # vAA <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aget_short: /* 0x4a */
+/* File: mips64/op_aget_short.S */
+/* File: mips64/op_aget.S */
+ /*
+ * Array get, 32 bits or less. vAA <- vBB[vCC].
+ *
+ * for: aget, aget-boolean, aget-byte, aget-char, aget-short
+ *
+ * NOTE: assumes data offset for arrays is the same for all non-wide types.
+ * If this changes, specialize.
+ */
+ /* op vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ .if 1
+ # [d]lsa does not support shift count of 0.
+ dlsa a0, a1, a0, 1 # a0 <- arrayObj + index*width
+ .else
+ daddu a0, a1, a0 # a0 <- arrayObj + index*width
+ .endif
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ lh a2, MIRROR_SHORT_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a2, a4 # vAA <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aput: /* 0x4b */
+/* File: mips64/op_aput.S */
+ /*
+ * Array put, 32 bits or less. vBB[vCC] <- vAA.
+ *
+ * for: aput, aput-boolean, aput-byte, aput-char, aput-short
+ *
+ * NOTE: this assumes data offset for arrays is the same for all non-wide types.
+ * If this changes, specialize.
+ */
+ /* op vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ .if 2
+ # [d]lsa does not support shift count of 0.
+ dlsa a0, a1, a0, 2 # a0 <- arrayObj + index*width
+ .else
+ daddu a0, a1, a0 # a0 <- arrayObj + index*width
+ .endif
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_VREG a2, a4 # a2 <- vAA
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ sw a2, MIRROR_INT_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aput_wide: /* 0x4c */
+/* File: mips64/op_aput_wide.S */
+ /*
+ * Array put, 64 bits. vBB[vCC] <- vAA.
+ *
+ */
+ /* aput-wide vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ dlsa a0, a1, a0, 3 # a0 <- arrayObj + index*width
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ GET_VREG_WIDE a2, a4 # a2 <- vAA
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ sw a2, MIRROR_WIDE_ARRAY_DATA_OFFSET(a0)
+ dsrl32 a2, a2, 0
+ sw a2, (MIRROR_WIDE_ARRAY_DATA_OFFSET+4)(a0) # vBB[vCC] <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aput_object: /* 0x4d */
+/* File: mips64/op_aput_object.S */
+ /*
+ * Store an object into an array. vBB[vCC] <- vAA.
+ */
+ /* op vAA, vBB, vCC */
+ .extern MterpAputObject
+ EXPORT_PC
+ daddu a0, rFP, OFF_FP_SHADOWFRAME
+ move a1, rPC
+ move a2, rINST
+ jal MterpAputObject
+ beqzc v0, MterpPossibleException
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aput_boolean: /* 0x4e */
+/* File: mips64/op_aput_boolean.S */
+/* File: mips64/op_aput.S */
+ /*
+ * Array put, 32 bits or less. vBB[vCC] <- vAA.
+ *
+ * for: aput, aput-boolean, aput-byte, aput-char, aput-short
+ *
+ * NOTE: this assumes data offset for arrays is the same for all non-wide types.
+ * If this changes, specialize.
+ */
+ /* op vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ .if 0
+ # [d]lsa does not support shift count of 0.
+ dlsa a0, a1, a0, 0 # a0 <- arrayObj + index*width
+ .else
+ daddu a0, a1, a0 # a0 <- arrayObj + index*width
+ .endif
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_VREG a2, a4 # a2 <- vAA
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ sb a2, MIRROR_BOOLEAN_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aput_byte: /* 0x4f */
+/* File: mips64/op_aput_byte.S */
+/* File: mips64/op_aput.S */
+ /*
+ * Array put, 32 bits or less. vBB[vCC] <- vAA.
+ *
+ * for: aput, aput-boolean, aput-byte, aput-char, aput-short
+ *
+ * NOTE: this assumes data offset for arrays is the same for all non-wide types.
+ * If this changes, specialize.
+ */
+ /* op vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ .if 0
+ # [d]lsa does not support shift count of 0.
+ dlsa a0, a1, a0, 0 # a0 <- arrayObj + index*width
+ .else
+ daddu a0, a1, a0 # a0 <- arrayObj + index*width
+ .endif
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_VREG a2, a4 # a2 <- vAA
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ sb a2, MIRROR_BYTE_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aput_char: /* 0x50 */
+/* File: mips64/op_aput_char.S */
+/* File: mips64/op_aput.S */
+ /*
+ * Array put, 32 bits or less. vBB[vCC] <- vAA.
+ *
+ * for: aput, aput-boolean, aput-byte, aput-char, aput-short
+ *
+ * NOTE: this assumes data offset for arrays is the same for all non-wide types.
+ * If this changes, specialize.
+ */
+ /* op vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ .if 1
+ # [d]lsa does not support shift count of 0.
+ dlsa a0, a1, a0, 1 # a0 <- arrayObj + index*width
+ .else
+ daddu a0, a1, a0 # a0 <- arrayObj + index*width
+ .endif
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_VREG a2, a4 # a2 <- vAA
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ sh a2, MIRROR_CHAR_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_aput_short: /* 0x51 */
+/* File: mips64/op_aput_short.S */
+/* File: mips64/op_aput.S */
+ /*
+ * Array put, 32 bits or less. vBB[vCC] <- vAA.
+ *
+ * for: aput, aput-boolean, aput-byte, aput-char, aput-short
+ *
+ * NOTE: this assumes data offset for arrays is the same for all non-wide types.
+ * If this changes, specialize.
+ */
+ /* op vAA, vBB, vCC */
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ srl a4, rINST, 8 # a4 <- AA
+ GET_VREG_U a0, a2 # a0 <- vBB (array object)
+ GET_VREG a1, a3 # a1 <- vCC (requested index)
+ beqz a0, common_errNullObject # bail if null array object
+ lw a3, MIRROR_ARRAY_LENGTH_OFFSET(a0) # a3 <- arrayObj->length
+ .if 1
+ # [d]lsa does not support shift count of 0.
+ dlsa a0, a1, a0, 1 # a0 <- arrayObj + index*width
+ .else
+ daddu a0, a1, a0 # a0 <- arrayObj + index*width
+ .endif
+ bgeu a1, a3, common_errArrayIndex # unsigned compare: index >= length, bail
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_VREG a2, a4 # a2 <- vAA
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ sh a2, MIRROR_SHORT_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget: /* 0x52 */
+/* File: mips64/op_iget.S */
+ /*
+ * General instance field get.
+ *
+ * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
+ */
+ .extern artGet32InstanceFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ld a2, OFF_FP_METHOD(rFP) # a2 <- referrer
+ move a3, rSELF # a3 <- self
+ jal artGet32InstanceFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ ext a2, rINST, 8, 4 # a2 <- A
+ PREFETCH_INST 2
+ bnez a3, MterpPossibleException # bail out
+ .if 0
+ SET_VREG_OBJECT v0, a2 # fp[A] <- v0
+ .else
+ SET_VREG v0, a2 # fp[A] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_wide: /* 0x53 */
+/* File: mips64/op_iget_wide.S */
+ /*
+ * 64-bit instance field get.
+ *
+ * for: iget-wide
+ */
+ .extern artGet64InstanceFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ld a2, OFF_FP_METHOD(rFP) # a2 <- referrer
+ move a3, rSELF # a3 <- self
+ jal artGet64InstanceFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ ext a2, rINST, 8, 4 # a2 <- A
+ PREFETCH_INST 2
+ bnez a3, MterpPossibleException # bail out
+ SET_VREG_WIDE v0, a2 # fp[A] <- v0
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_object: /* 0x54 */
+/* File: mips64/op_iget_object.S */
+/* File: mips64/op_iget.S */
+ /*
+ * General instance field get.
+ *
+ * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
+ */
+ .extern artGetObjInstanceFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ld a2, OFF_FP_METHOD(rFP) # a2 <- referrer
+ move a3, rSELF # a3 <- self
+ jal artGetObjInstanceFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ ext a2, rINST, 8, 4 # a2 <- A
+ PREFETCH_INST 2
+ bnez a3, MterpPossibleException # bail out
+ .if 1
+ SET_VREG_OBJECT v0, a2 # fp[A] <- v0
+ .else
+ SET_VREG v0, a2 # fp[A] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_boolean: /* 0x55 */
+/* File: mips64/op_iget_boolean.S */
+/* File: mips64/op_iget.S */
+ /*
+ * General instance field get.
+ *
+ * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
+ */
+ .extern artGetBooleanInstanceFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ld a2, OFF_FP_METHOD(rFP) # a2 <- referrer
+ move a3, rSELF # a3 <- self
+ jal artGetBooleanInstanceFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ ext a2, rINST, 8, 4 # a2 <- A
+ PREFETCH_INST 2
+ bnez a3, MterpPossibleException # bail out
+ .if 0
+ SET_VREG_OBJECT v0, a2 # fp[A] <- v0
+ .else
+ SET_VREG v0, a2 # fp[A] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_byte: /* 0x56 */
+/* File: mips64/op_iget_byte.S */
+/* File: mips64/op_iget.S */
+ /*
+ * General instance field get.
+ *
+ * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
+ */
+ .extern artGetByteInstanceFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ld a2, OFF_FP_METHOD(rFP) # a2 <- referrer
+ move a3, rSELF # a3 <- self
+ jal artGetByteInstanceFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ ext a2, rINST, 8, 4 # a2 <- A
+ PREFETCH_INST 2
+ bnez a3, MterpPossibleException # bail out
+ .if 0
+ SET_VREG_OBJECT v0, a2 # fp[A] <- v0
+ .else
+ SET_VREG v0, a2 # fp[A] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_char: /* 0x57 */
+/* File: mips64/op_iget_char.S */
+/* File: mips64/op_iget.S */
+ /*
+ * General instance field get.
+ *
+ * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
+ */
+ .extern artGetCharInstanceFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ld a2, OFF_FP_METHOD(rFP) # a2 <- referrer
+ move a3, rSELF # a3 <- self
+ jal artGetCharInstanceFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ ext a2, rINST, 8, 4 # a2 <- A
+ PREFETCH_INST 2
+ bnez a3, MterpPossibleException # bail out
+ .if 0
+ SET_VREG_OBJECT v0, a2 # fp[A] <- v0
+ .else
+ SET_VREG v0, a2 # fp[A] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_short: /* 0x58 */
+/* File: mips64/op_iget_short.S */
+/* File: mips64/op_iget.S */
+ /*
+ * General instance field get.
+ *
+ * for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
+ */
+ .extern artGetShortInstanceFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ld a2, OFF_FP_METHOD(rFP) # a2 <- referrer
+ move a3, rSELF # a3 <- self
+ jal artGetShortInstanceFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ ext a2, rINST, 8, 4 # a2 <- A
+ PREFETCH_INST 2
+ bnez a3, MterpPossibleException # bail out
+ .if 0
+ SET_VREG_OBJECT v0, a2 # fp[A] <- v0
+ .else
+ SET_VREG v0, a2 # fp[A] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput: /* 0x59 */
+/* File: mips64/op_iput.S */
+ /*
+ * General 32-bit instance field put.
+ *
+ * for: iput, iput-boolean, iput-byte, iput-char, iput-short
+ */
+ /* op vA, vB, field//CCCC */
+ .extern artSet32InstanceFromMterp
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ GET_VREG a2, a2 # a2 <- fp[A]
+ ld a3, OFF_FP_METHOD(rFP) # a3 <- referrer
+ PREFETCH_INST 2
+ jal artSet32InstanceFromMterp
+ bnez v0, MterpPossibleException # bail out
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_wide: /* 0x5a */
+/* File: mips64/op_iput_wide.S */
+ /* iput-wide vA, vB, field//CCCC */
+ .extern artSet64InstanceFromMterp
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ dlsa a2, a2, rFP, 2 # a2 <- &fp[A]
+ ld a3, OFF_FP_METHOD(rFP) # a3 <- referrer
+ PREFETCH_INST 2
+ jal artSet64InstanceFromMterp
+ bnez v0, MterpPossibleException # bail out
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_object: /* 0x5b */
+/* File: mips64/op_iput_object.S */
+ .extern MterpIputObject
+ EXPORT_PC
+ daddu a0, rFP, OFF_FP_SHADOWFRAME
+ move a1, rPC
+ move a2, rINST
+ move a3, rSELF
+ jal MterpIputObject
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_boolean: /* 0x5c */
+/* File: mips64/op_iput_boolean.S */
+/* File: mips64/op_iput.S */
+ /*
+ * General 32-bit instance field put.
+ *
+ * for: iput, iput-boolean, iput-byte, iput-char, iput-short
+ */
+ /* op vA, vB, field//CCCC */
+ .extern artSet8InstanceFromMterp
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ GET_VREG a2, a2 # a2 <- fp[A]
+ ld a3, OFF_FP_METHOD(rFP) # a3 <- referrer
+ PREFETCH_INST 2
+ jal artSet8InstanceFromMterp
+ bnez v0, MterpPossibleException # bail out
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_byte: /* 0x5d */
+/* File: mips64/op_iput_byte.S */
+/* File: mips64/op_iput.S */
+ /*
+ * General 32-bit instance field put.
+ *
+ * for: iput, iput-boolean, iput-byte, iput-char, iput-short
+ */
+ /* op vA, vB, field//CCCC */
+ .extern artSet8InstanceFromMterp
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ GET_VREG a2, a2 # a2 <- fp[A]
+ ld a3, OFF_FP_METHOD(rFP) # a3 <- referrer
+ PREFETCH_INST 2
+ jal artSet8InstanceFromMterp
+ bnez v0, MterpPossibleException # bail out
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_char: /* 0x5e */
+/* File: mips64/op_iput_char.S */
+/* File: mips64/op_iput.S */
+ /*
+ * General 32-bit instance field put.
+ *
+ * for: iput, iput-boolean, iput-byte, iput-char, iput-short
+ */
+ /* op vA, vB, field//CCCC */
+ .extern artSet16InstanceFromMterp
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ GET_VREG a2, a2 # a2 <- fp[A]
+ ld a3, OFF_FP_METHOD(rFP) # a3 <- referrer
+ PREFETCH_INST 2
+ jal artSet16InstanceFromMterp
+ bnez v0, MterpPossibleException # bail out
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_short: /* 0x5f */
+/* File: mips64/op_iput_short.S */
+/* File: mips64/op_iput.S */
+ /*
+ * General 32-bit instance field put.
+ *
+ * for: iput, iput-boolean, iput-byte, iput-char, iput-short
+ */
+ /* op vA, vB, field//CCCC */
+ .extern artSet16InstanceFromMterp
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref CCCC
+ srl a1, rINST, 12 # a1 <- B
+ GET_VREG_U a1, a1 # a1 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ GET_VREG a2, a2 # a2 <- fp[A]
+ ld a3, OFF_FP_METHOD(rFP) # a3 <- referrer
+ PREFETCH_INST 2
+ jal artSet16InstanceFromMterp
+ bnez v0, MterpPossibleException # bail out
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sget: /* 0x60 */
+/* File: mips64/op_sget.S */
+ /*
+ * General SGET handler wrapper.
+ *
+ * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artGet32StaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ ld a1, OFF_FP_METHOD(rFP)
+ move a2, rSELF
+ jal artGet32StaticFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ srl a2, rINST, 8 # a2 <- AA
+
+ PREFETCH_INST 2
+ bnez a3, MterpException # bail out
+ .if 0
+ SET_VREG_OBJECT v0, a2 # fp[AA] <- v0
+ .else
+ SET_VREG v0, a2 # fp[AA] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sget_wide: /* 0x61 */
+/* File: mips64/op_sget_wide.S */
+ /*
+ * SGET_WIDE handler wrapper.
+ *
+ */
+ /* sget-wide vAA, field//BBBB */
+ .extern artGet64StaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ ld a1, OFF_FP_METHOD(rFP)
+ move a2, rSELF
+ jal artGet64StaticFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ srl a4, rINST, 8 # a4 <- AA
+ bnez a3, MterpException # bail out
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ SET_VREG_WIDE v0, a4
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sget_object: /* 0x62 */
+/* File: mips64/op_sget_object.S */
+/* File: mips64/op_sget.S */
+ /*
+ * General SGET handler wrapper.
+ *
+ * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artGetObjStaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ ld a1, OFF_FP_METHOD(rFP)
+ move a2, rSELF
+ jal artGetObjStaticFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ srl a2, rINST, 8 # a2 <- AA
+
+ PREFETCH_INST 2
+ bnez a3, MterpException # bail out
+ .if 1
+ SET_VREG_OBJECT v0, a2 # fp[AA] <- v0
+ .else
+ SET_VREG v0, a2 # fp[AA] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sget_boolean: /* 0x63 */
+/* File: mips64/op_sget_boolean.S */
+/* File: mips64/op_sget.S */
+ /*
+ * General SGET handler wrapper.
+ *
+ * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artGetBooleanStaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ ld a1, OFF_FP_METHOD(rFP)
+ move a2, rSELF
+ jal artGetBooleanStaticFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ srl a2, rINST, 8 # a2 <- AA
+ and v0, v0, 0xff
+ PREFETCH_INST 2
+ bnez a3, MterpException # bail out
+ .if 0
+ SET_VREG_OBJECT v0, a2 # fp[AA] <- v0
+ .else
+ SET_VREG v0, a2 # fp[AA] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sget_byte: /* 0x64 */
+/* File: mips64/op_sget_byte.S */
+/* File: mips64/op_sget.S */
+ /*
+ * General SGET handler wrapper.
+ *
+ * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artGetByteStaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ ld a1, OFF_FP_METHOD(rFP)
+ move a2, rSELF
+ jal artGetByteStaticFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ srl a2, rINST, 8 # a2 <- AA
+ seb v0, v0
+ PREFETCH_INST 2
+ bnez a3, MterpException # bail out
+ .if 0
+ SET_VREG_OBJECT v0, a2 # fp[AA] <- v0
+ .else
+ SET_VREG v0, a2 # fp[AA] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sget_char: /* 0x65 */
+/* File: mips64/op_sget_char.S */
+/* File: mips64/op_sget.S */
+ /*
+ * General SGET handler wrapper.
+ *
+ * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artGetCharStaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ ld a1, OFF_FP_METHOD(rFP)
+ move a2, rSELF
+ jal artGetCharStaticFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ srl a2, rINST, 8 # a2 <- AA
+ and v0, v0, 0xffff
+ PREFETCH_INST 2
+ bnez a3, MterpException # bail out
+ .if 0
+ SET_VREG_OBJECT v0, a2 # fp[AA] <- v0
+ .else
+ SET_VREG v0, a2 # fp[AA] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sget_short: /* 0x66 */
+/* File: mips64/op_sget_short.S */
+/* File: mips64/op_sget.S */
+ /*
+ * General SGET handler wrapper.
+ *
+ * for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artGetShortStaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ ld a1, OFF_FP_METHOD(rFP)
+ move a2, rSELF
+ jal artGetShortStaticFromCode
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ srl a2, rINST, 8 # a2 <- AA
+ seh v0, v0
+ PREFETCH_INST 2
+ bnez a3, MterpException # bail out
+ .if 0
+ SET_VREG_OBJECT v0, a2 # fp[AA] <- v0
+ .else
+ SET_VREG v0, a2 # fp[AA] <- v0
+ .endif
+ ADVANCE 2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sput: /* 0x67 */
+/* File: mips64/op_sput.S */
+ /*
+ * General SPUT handler wrapper.
+ *
+ * for: sput, sput-boolean, sput-byte, sput-char, sput-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artSet32StaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ srl a3, rINST, 8 # a3 <- AA
+ GET_VREG a1, a3 # a1 <- fp[AA]
+ ld a2, OFF_FP_METHOD(rFP)
+ move a3, rSELF
+ PREFETCH_INST 2 # Get next inst, but don't advance rPC
+ jal artSet32StaticFromCode
+ bnezc v0, MterpException # 0 on success
+ ADVANCE 2 # Past exception point - now advance rPC
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sput_wide: /* 0x68 */
+/* File: mips64/op_sput_wide.S */
+ /*
+ * SPUT_WIDE handler wrapper.
+ *
+ */
+ /* sput-wide vAA, field//BBBB */
+ .extern artSet64IndirectStaticFromMterp
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ ld a1, OFF_FP_METHOD(rFP)
+ srl a2, rINST, 8 # a2 <- AA
+ dlsa a2, a2, rFP, 2
+ move a3, rSELF
+ PREFETCH_INST 2 # Get next inst, but don't advance rPC
+ jal artSet64IndirectStaticFromMterp
+ bnezc v0, MterpException # 0 on success, -1 on failure
+ ADVANCE 2 # Past exception point - now advance rPC
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sput_object: /* 0x69 */
+/* File: mips64/op_sput_object.S */
+ .extern MterpSputObject
+ EXPORT_PC
+ daddu a0, rFP, OFF_FP_SHADOWFRAME
+ move a1, rPC
+ move a2, rINST
+ move a3, rSELF
+ jal MterpSputObject
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sput_boolean: /* 0x6a */
+/* File: mips64/op_sput_boolean.S */
+/* File: mips64/op_sput.S */
+ /*
+ * General SPUT handler wrapper.
+ *
+ * for: sput, sput-boolean, sput-byte, sput-char, sput-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artSet8StaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ srl a3, rINST, 8 # a3 <- AA
+ GET_VREG a1, a3 # a1 <- fp[AA]
+ ld a2, OFF_FP_METHOD(rFP)
+ move a3, rSELF
+ PREFETCH_INST 2 # Get next inst, but don't advance rPC
+ jal artSet8StaticFromCode
+ bnezc v0, MterpException # 0 on success
+ ADVANCE 2 # Past exception point - now advance rPC
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sput_byte: /* 0x6b */
+/* File: mips64/op_sput_byte.S */
+/* File: mips64/op_sput.S */
+ /*
+ * General SPUT handler wrapper.
+ *
+ * for: sput, sput-boolean, sput-byte, sput-char, sput-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artSet8StaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ srl a3, rINST, 8 # a3 <- AA
+ GET_VREG a1, a3 # a1 <- fp[AA]
+ ld a2, OFF_FP_METHOD(rFP)
+ move a3, rSELF
+ PREFETCH_INST 2 # Get next inst, but don't advance rPC
+ jal artSet8StaticFromCode
+ bnezc v0, MterpException # 0 on success
+ ADVANCE 2 # Past exception point - now advance rPC
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sput_char: /* 0x6c */
+/* File: mips64/op_sput_char.S */
+/* File: mips64/op_sput.S */
+ /*
+ * General SPUT handler wrapper.
+ *
+ * for: sput, sput-boolean, sput-byte, sput-char, sput-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artSet16StaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ srl a3, rINST, 8 # a3 <- AA
+ GET_VREG a1, a3 # a1 <- fp[AA]
+ ld a2, OFF_FP_METHOD(rFP)
+ move a3, rSELF
+ PREFETCH_INST 2 # Get next inst, but don't advance rPC
+ jal artSet16StaticFromCode
+ bnezc v0, MterpException # 0 on success
+ ADVANCE 2 # Past exception point - now advance rPC
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sput_short: /* 0x6d */
+/* File: mips64/op_sput_short.S */
+/* File: mips64/op_sput.S */
+ /*
+ * General SPUT handler wrapper.
+ *
+ * for: sput, sput-boolean, sput-byte, sput-char, sput-short
+ */
+ /* op vAA, field//BBBB */
+ .extern artSet16StaticFromCode
+ EXPORT_PC
+ lhu a0, 2(rPC) # a0 <- field ref BBBB
+ srl a3, rINST, 8 # a3 <- AA
+ GET_VREG a1, a3 # a1 <- fp[AA]
+ ld a2, OFF_FP_METHOD(rFP)
+ move a3, rSELF
+ PREFETCH_INST 2 # Get next inst, but don't advance rPC
+ jal artSet16StaticFromCode
+ bnezc v0, MterpException # 0 on success
+ ADVANCE 2 # Past exception point - now advance rPC
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_virtual: /* 0x6e */
+/* File: mips64/op_invoke_virtual.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeVirtual
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeVirtual
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+ /*
+ * Handle a virtual method call.
+ *
+ * for: invoke-virtual, invoke-virtual/range
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_super: /* 0x6f */
+/* File: mips64/op_invoke_super.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeSuper
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeSuper
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+ /*
+ * Handle a "super" method call.
+ *
+ * for: invoke-super, invoke-super/range
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_direct: /* 0x70 */
+/* File: mips64/op_invoke_direct.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeDirect
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeDirect
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_static: /* 0x71 */
+/* File: mips64/op_invoke_static.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeStatic
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeStatic
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_interface: /* 0x72 */
+/* File: mips64/op_invoke_interface.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeInterface
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeInterface
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+ /*
+ * Handle an interface method call.
+ *
+ * for: invoke-interface, invoke-interface/range
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+
+/* ------------------------------ */
+ .balign 128
+.L_op_return_void_no_barrier: /* 0x73 */
+/* File: mips64/op_return_void_no_barrier.S */
+ .extern MterpSuspendCheck
+ lw ra, THREAD_FLAGS_OFFSET(rSELF)
+ move a0, rSELF
+ and ra, ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
+ beqzc ra, 1f
+ jal MterpSuspendCheck # (self)
+1:
+ li a0, 0
+ b MterpReturn
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_virtual_range: /* 0x74 */
+/* File: mips64/op_invoke_virtual_range.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeVirtualRange
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeVirtualRange
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_super_range: /* 0x75 */
+/* File: mips64/op_invoke_super_range.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeSuperRange
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeSuperRange
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_direct_range: /* 0x76 */
+/* File: mips64/op_invoke_direct_range.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeDirectRange
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeDirectRange
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_static_range: /* 0x77 */
+/* File: mips64/op_invoke_static_range.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeStaticRange
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeStaticRange
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_interface_range: /* 0x78 */
+/* File: mips64/op_invoke_interface_range.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeInterfaceRange
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeInterfaceRange
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_79: /* 0x79 */
+/* File: mips64/op_unused_79.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_7a: /* 0x7a */
+/* File: mips64/op_unused_7a.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_neg_int: /* 0x7b */
+/* File: mips64/op_neg_int.S */
+/* File: mips64/unop.S */
+ /*
+ * Generic 32-bit unary operation. Provide an "instr" line that
+ * specifies an instruction that performs "a0 = op a0".
+ *
+ * for: int-to-byte, int-to-char, int-to-short,
+ * not-int, neg-int
+ */
+ /* unop vA, vB */
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ ext a2, rINST, 8, 4 # a2 <- A
+ # optional op
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ subu a0, zero, a0 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_not_int: /* 0x7c */
+/* File: mips64/op_not_int.S */
+/* File: mips64/unop.S */
+ /*
+ * Generic 32-bit unary operation. Provide an "instr" line that
+ * specifies an instruction that performs "a0 = op a0".
+ *
+ * for: int-to-byte, int-to-char, int-to-short,
+ * not-int, neg-int
+ */
+ /* unop vA, vB */
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ ext a2, rINST, 8, 4 # a2 <- A
+ # optional op
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ nor a0, zero, a0 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_neg_long: /* 0x7d */
+/* File: mips64/op_neg_long.S */
+/* File: mips64/unopWide.S */
+ /*
+ * Generic 64-bit unary operation. Provide an "instr" line that
+ * specifies an instruction that performs "a0 = op a0".
+ *
+ * For: not-long, neg-long
+ */
+ /* unop vA, vB */
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a3 # a0 <- vB
+ ext a2, rINST, 8, 4 # a2 <- A
+ # optional op
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ dsubu a0, zero, a0 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_not_long: /* 0x7e */
+/* File: mips64/op_not_long.S */
+/* File: mips64/unopWide.S */
+ /*
+ * Generic 64-bit unary operation. Provide an "instr" line that
+ * specifies an instruction that performs "a0 = op a0".
+ *
+ * For: not-long, neg-long
+ */
+ /* unop vA, vB */
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a3 # a0 <- vB
+ ext a2, rINST, 8, 4 # a2 <- A
+ # optional op
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ nor a0, zero, a0 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_neg_float: /* 0x7f */
+/* File: mips64/op_neg_float.S */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_FLOAT f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ neg.s f0, f0
+/* File: mips64/fcvtFooter.S */
+ /*
+ * Stores a specified register containing the result of conversion
+ * from or to a floating-point type and jumps to the next instruction.
+ *
+ * Expects a1 to contain the destination Dalvik register number.
+ * a1 is set up by fcvtHeader.S.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ *
+ * Note that this file can't be included after a break in other files
+ * and in those files its contents appear as a copy.
+ * See: float-to-int, float-to-long, double-to-int, double-to-long.
+ */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_neg_double: /* 0x80 */
+/* File: mips64/op_neg_double.S */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_DOUBLE f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ neg.d f0, f0
+/* File: mips64/fcvtFooter.S */
+ /*
+ * Stores a specified register containing the result of conversion
+ * from or to a floating-point type and jumps to the next instruction.
+ *
+ * Expects a1 to contain the destination Dalvik register number.
+ * a1 is set up by fcvtHeader.S.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ *
+ * Note that this file can't be included after a break in other files
+ * and in those files its contents appear as a copy.
+ * See: float-to-int, float-to-long, double-to-int, double-to-long.
+ */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_int_to_long: /* 0x81 */
+/* File: mips64/op_int_to_long.S */
+ /* int-to-long vA, vB */
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB (sign-extended to 64 bits)
+ ext a2, rINST, 8, 4 # a2 <- A
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- vB
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_int_to_float: /* 0x82 */
+/* File: mips64/op_int_to_float.S */
+ /*
+ * Conversion from or to floating-point happens in a floating-point register.
+ * Therefore we load the input and store the output into or from a
+ * floating-point register irrespective of the type.
+ */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_FLOAT f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ cvt.s.w f0, f0
+/* File: mips64/fcvtFooter.S */
+ /*
+ * Stores a specified register containing the result of conversion
+ * from or to a floating-point type and jumps to the next instruction.
+ *
+ * Expects a1 to contain the destination Dalvik register number.
+ * a1 is set up by fcvtHeader.S.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ *
+ * Note that this file can't be included after a break in other files
+ * and in those files its contents appear as a copy.
+ * See: float-to-int, float-to-long, double-to-int, double-to-long.
+ */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_int_to_double: /* 0x83 */
+/* File: mips64/op_int_to_double.S */
+ /*
+ * Conversion from or to floating-point happens in a floating-point register.
+ * Therefore we load the input and store the output into or from a
+ * floating-point register irrespective of the type.
+ */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_FLOAT f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ cvt.d.w f0, f0
+/* File: mips64/fcvtFooter.S */
+ /*
+ * Stores a specified register containing the result of conversion
+ * from or to a floating-point type and jumps to the next instruction.
+ *
+ * Expects a1 to contain the destination Dalvik register number.
+ * a1 is set up by fcvtHeader.S.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ *
+ * Note that this file can't be included after a break in other files
+ * and in those files its contents appear as a copy.
+ * See: float-to-int, float-to-long, double-to-int, double-to-long.
+ */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_long_to_int: /* 0x84 */
+/* File: mips64/op_long_to_int.S */
+/* we ignore the high word, making this equivalent to a 32-bit reg move */
+/* File: mips64/op_move.S */
+ /* for move, move-object, long-to-int */
+ /* op vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_VREG a0, a3 # a0 <- vB
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ .if 0
+ SET_VREG_OBJECT a0, a2 # vA <- vB
+ .else
+ SET_VREG a0, a2 # vA <- vB
+ .endif
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_long_to_float: /* 0x85 */
+/* File: mips64/op_long_to_float.S */
+ /*
+ * Conversion from or to floating-point happens in a floating-point register.
+ * Therefore we load the input and store the output into or from a
+ * floating-point register irrespective of the type.
+ */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_DOUBLE f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ cvt.s.l f0, f0
+/* File: mips64/fcvtFooter.S */
+ /*
+ * Stores a specified register containing the result of conversion
+ * from or to a floating-point type and jumps to the next instruction.
+ *
+ * Expects a1 to contain the destination Dalvik register number.
+ * a1 is set up by fcvtHeader.S.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ *
+ * Note that this file can't be included after a break in other files
+ * and in those files its contents appear as a copy.
+ * See: float-to-int, float-to-long, double-to-int, double-to-long.
+ */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_long_to_double: /* 0x86 */
+/* File: mips64/op_long_to_double.S */
+ /*
+ * Conversion from or to floating-point happens in a floating-point register.
+ * Therefore we load the input and store the output into or from a
+ * floating-point register irrespective of the type.
+ */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_DOUBLE f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ cvt.d.l f0, f0
+/* File: mips64/fcvtFooter.S */
+ /*
+ * Stores a specified register containing the result of conversion
+ * from or to a floating-point type and jumps to the next instruction.
+ *
+ * Expects a1 to contain the destination Dalvik register number.
+ * a1 is set up by fcvtHeader.S.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ *
+ * Note that this file can't be included after a break in other files
+ * and in those files its contents appear as a copy.
+ * See: float-to-int, float-to-long, double-to-int, double-to-long.
+ */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_float_to_int: /* 0x87 */
+/* File: mips64/op_float_to_int.S */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_FLOAT f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ /*
+ * TODO: simplify this when the MIPS64R6 emulator
+ * supports NAN2008=1.
+ */
+ li t0, INT_MIN_AS_FLOAT
+ mtc1 t0, f1
+ cmp.le.s f1, f1, f0
+ bc1nez f1, .Lop_float_to_int_trunc
+ cmp.eq.s f1, f0, f0
+ li t0, INT_MIN
+ mfc1 t1, f1
+ and t0, t0, t1
+ b .Lop_float_to_int_done
+
+/* ------------------------------ */
+ .balign 128
+.L_op_float_to_long: /* 0x88 */
+/* File: mips64/op_float_to_long.S */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_FLOAT f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ /*
+ * TODO: simplify this when the MIPS64R6 emulator
+ * supports NAN2008=1.
+ */
+ li t0, LONG_MIN_AS_FLOAT
+ mtc1 t0, f1
+ cmp.le.s f1, f1, f0
+ bc1nez f1, .Lop_float_to_long_trunc
+ cmp.eq.s f1, f0, f0
+ dli t0, LONG_MIN
+ mfc1 t1, f1
+ and t0, t0, t1
+ b .Lop_float_to_long_done
+
+/* ------------------------------ */
+ .balign 128
+.L_op_float_to_double: /* 0x89 */
+/* File: mips64/op_float_to_double.S */
+ /*
+ * Conversion from or to floating-point happens in a floating-point register.
+ * Therefore we load the input and store the output into or from a
+ * floating-point register irrespective of the type.
+ */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_FLOAT f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ cvt.d.s f0, f0
+/* File: mips64/fcvtFooter.S */
+ /*
+ * Stores a specified register containing the result of conversion
+ * from or to a floating-point type and jumps to the next instruction.
+ *
+ * Expects a1 to contain the destination Dalvik register number.
+ * a1 is set up by fcvtHeader.S.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ *
+ * Note that this file can't be included after a break in other files
+ * and in those files its contents appear as a copy.
+ * See: float-to-int, float-to-long, double-to-int, double-to-long.
+ */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_double_to_int: /* 0x8a */
+/* File: mips64/op_double_to_int.S */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_DOUBLE f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ /*
+ * TODO: simplify this when the MIPS64R6 emulator
+ * supports NAN2008=1.
+ */
+ dli t0, INT_MIN_AS_DOUBLE
+ dmtc1 t0, f1
+ cmp.le.d f1, f1, f0
+ bc1nez f1, .Lop_double_to_int_trunc
+ cmp.eq.d f1, f0, f0
+ li t0, INT_MIN
+ mfc1 t1, f1
+ and t0, t0, t1
+ b .Lop_double_to_int_done
+
+/* ------------------------------ */
+ .balign 128
+.L_op_double_to_long: /* 0x8b */
+/* File: mips64/op_double_to_long.S */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_DOUBLE f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ /*
+ * TODO: simplify this when the MIPS64R6 emulator
+ * supports NAN2008=1.
+ */
+ dli t0, LONG_MIN_AS_DOUBLE
+ dmtc1 t0, f1
+ cmp.le.d f1, f1, f0
+ bc1nez f1, .Lop_double_to_long_trunc
+ cmp.eq.d f1, f0, f0
+ dli t0, LONG_MIN
+ mfc1 t1, f1
+ and t0, t0, t1
+ b .Lop_double_to_long_done
+
+/* ------------------------------ */
+ .balign 128
+.L_op_double_to_float: /* 0x8c */
+/* File: mips64/op_double_to_float.S */
+ /*
+ * Conversion from or to floating-point happens in a floating-point register.
+ * Therefore we load the input and store the output into or from a
+ * floating-point register irrespective of the type.
+ */
+/* File: mips64/fcvtHeader.S */
+ /*
+ * Loads a specified register from vB. Used primarily for conversions
+ * from or to a floating-point type.
+ *
+ * Sets up a1 = A and a2 = B. a2 is later used by fcvtFooter.S to
+ * store the result in vA and jump to the next instruction.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ */
+ ext a1, rINST, 8, 4 # a1 <- A
+ srl a2, rINST, 12 # a2 <- B
+ GET_VREG_DOUBLE f0, a2
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+
+ cvt.s.d f0, f0
+/* File: mips64/fcvtFooter.S */
+ /*
+ * Stores a specified register containing the result of conversion
+ * from or to a floating-point type and jumps to the next instruction.
+ *
+ * Expects a1 to contain the destination Dalvik register number.
+ * a1 is set up by fcvtHeader.S.
+ *
+ * For: int-to-float, int-to-double, long-to-float, long-to-double,
+ * float-to-int, float-to-long, float-to-double, double-to-int,
+ * double-to-long, double-to-float, neg-float, neg-double.
+ *
+ * Note that this file can't be included after a break in other files
+ * and in those files its contents appear as a copy.
+ * See: float-to-int, float-to-long, double-to-int, double-to-long.
+ */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_int_to_byte: /* 0x8d */
+/* File: mips64/op_int_to_byte.S */
+/* File: mips64/unop.S */
+ /*
+ * Generic 32-bit unary operation. Provide an "instr" line that
+ * specifies an instruction that performs "a0 = op a0".
+ *
+ * for: int-to-byte, int-to-char, int-to-short,
+ * not-int, neg-int
+ */
+ /* unop vA, vB */
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ ext a2, rINST, 8, 4 # a2 <- A
+ # optional op
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ seb a0, a0 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_int_to_char: /* 0x8e */
+/* File: mips64/op_int_to_char.S */
+/* File: mips64/unop.S */
+ /*
+ * Generic 32-bit unary operation. Provide an "instr" line that
+ * specifies an instruction that performs "a0 = op a0".
+ *
+ * for: int-to-byte, int-to-char, int-to-short,
+ * not-int, neg-int
+ */
+ /* unop vA, vB */
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ ext a2, rINST, 8, 4 # a2 <- A
+ # optional op
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ and a0, a0, 0xffff # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_int_to_short: /* 0x8f */
+/* File: mips64/op_int_to_short.S */
+/* File: mips64/unop.S */
+ /*
+ * Generic 32-bit unary operation. Provide an "instr" line that
+ * specifies an instruction that performs "a0 = op a0".
+ *
+ * for: int-to-byte, int-to-char, int-to-short,
+ * not-int, neg-int
+ */
+ /* unop vA, vB */
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ ext a2, rINST, 8, 4 # a2 <- A
+ # optional op
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ seh a0, a0 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_add_int: /* 0x90 */
+/* File: mips64/op_add_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ addu a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sub_int: /* 0x91 */
+/* File: mips64/op_sub_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ subu a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_mul_int: /* 0x92 */
+/* File: mips64/op_mul_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ mul a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_div_int: /* 0x93 */
+/* File: mips64/op_div_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ div a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rem_int: /* 0x94 */
+/* File: mips64/op_rem_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ mod a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_and_int: /* 0x95 */
+/* File: mips64/op_and_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ and a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_or_int: /* 0x96 */
+/* File: mips64/op_or_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ or a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_xor_int: /* 0x97 */
+/* File: mips64/op_xor_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ xor a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_shl_int: /* 0x98 */
+/* File: mips64/op_shl_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ sll a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_shr_int: /* 0x99 */
+/* File: mips64/op_shr_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ sra a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_ushr_int: /* 0x9a */
+/* File: mips64/op_ushr_int.S */
+/* File: mips64/binop.S */
+ /*
+ * Generic 32-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
+ * xor-int, shl-int, shr-int, ushr-int
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG a0, a2 # a0 <- vBB
+ GET_VREG a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ srl a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_add_long: /* 0x9b */
+/* File: mips64/op_add_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ daddu a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sub_long: /* 0x9c */
+/* File: mips64/op_sub_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ dsubu a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_mul_long: /* 0x9d */
+/* File: mips64/op_mul_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ dmul a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_div_long: /* 0x9e */
+/* File: mips64/op_div_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ ddiv a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rem_long: /* 0x9f */
+/* File: mips64/op_rem_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ dmod a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_and_long: /* 0xa0 */
+/* File: mips64/op_and_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ and a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_or_long: /* 0xa1 */
+/* File: mips64/op_or_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ or a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_xor_long: /* 0xa2 */
+/* File: mips64/op_xor_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ xor a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_shl_long: /* 0xa3 */
+/* File: mips64/op_shl_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ dsll a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_shr_long: /* 0xa4 */
+/* File: mips64/op_shr_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ dsra a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_ushr_long: /* 0xa5 */
+/* File: mips64/op_ushr_long.S */
+/* File: mips64/binopWide.S */
+ /*
+ * Generic 64-bit binary operation. Provide an "instr" line that
+ * specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vCC (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long, sub-long, mul-long, div-long, rem-long, and-long, or-long,
+ * xor-long, shl-long, shr-long, ushr-long
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_WIDE a0, a2 # a0 <- vBB
+ GET_VREG_WIDE a1, a3 # a1 <- vCC
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ dsrl a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a4 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_add_float: /* 0xa6 */
+/* File: mips64/op_add_float.S */
+/* File: mips64/fbinop.S */
+ /*:
+ * Generic 32-bit floating-point operation.
+ *
+ * For: add-float, sub-float, mul-float, div-float.
+ * form: <op> f0, f0, f1
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_FLOAT f0, a2 # f0 <- vBB
+ GET_VREG_FLOAT f1, a3 # f1 <- vCC
+ add.s f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a4 # vAA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sub_float: /* 0xa7 */
+/* File: mips64/op_sub_float.S */
+/* File: mips64/fbinop.S */
+ /*:
+ * Generic 32-bit floating-point operation.
+ *
+ * For: add-float, sub-float, mul-float, div-float.
+ * form: <op> f0, f0, f1
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_FLOAT f0, a2 # f0 <- vBB
+ GET_VREG_FLOAT f1, a3 # f1 <- vCC
+ sub.s f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a4 # vAA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_mul_float: /* 0xa8 */
+/* File: mips64/op_mul_float.S */
+/* File: mips64/fbinop.S */
+ /*:
+ * Generic 32-bit floating-point operation.
+ *
+ * For: add-float, sub-float, mul-float, div-float.
+ * form: <op> f0, f0, f1
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_FLOAT f0, a2 # f0 <- vBB
+ GET_VREG_FLOAT f1, a3 # f1 <- vCC
+ mul.s f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a4 # vAA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_div_float: /* 0xa9 */
+/* File: mips64/op_div_float.S */
+/* File: mips64/fbinop.S */
+ /*:
+ * Generic 32-bit floating-point operation.
+ *
+ * For: add-float, sub-float, mul-float, div-float.
+ * form: <op> f0, f0, f1
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_FLOAT f0, a2 # f0 <- vBB
+ GET_VREG_FLOAT f1, a3 # f1 <- vCC
+ div.s f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a4 # vAA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rem_float: /* 0xaa */
+/* File: mips64/op_rem_float.S */
+ /* rem-float vAA, vBB, vCC */
+ .extern fmodf
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_FLOAT f12, a2 # f12 <- vBB
+ GET_VREG_FLOAT f13, a3 # f13 <- vCC
+ jal fmodf # f0 <- f12 op f13
+ srl a4, rINST, 8 # a4 <- AA
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a4 # vAA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_add_double: /* 0xab */
+/* File: mips64/op_add_double.S */
+/* File: mips64/fbinopWide.S */
+ /*:
+ * Generic 64-bit floating-point operation.
+ *
+ * For: add-double, sub-double, mul-double, div-double.
+ * form: <op> f0, f0, f1
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_DOUBLE f0, a2 # f0 <- vBB
+ GET_VREG_DOUBLE f1, a3 # f1 <- vCC
+ add.d f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a4 # vAA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sub_double: /* 0xac */
+/* File: mips64/op_sub_double.S */
+/* File: mips64/fbinopWide.S */
+ /*:
+ * Generic 64-bit floating-point operation.
+ *
+ * For: add-double, sub-double, mul-double, div-double.
+ * form: <op> f0, f0, f1
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_DOUBLE f0, a2 # f0 <- vBB
+ GET_VREG_DOUBLE f1, a3 # f1 <- vCC
+ sub.d f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a4 # vAA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_mul_double: /* 0xad */
+/* File: mips64/op_mul_double.S */
+/* File: mips64/fbinopWide.S */
+ /*:
+ * Generic 64-bit floating-point operation.
+ *
+ * For: add-double, sub-double, mul-double, div-double.
+ * form: <op> f0, f0, f1
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_DOUBLE f0, a2 # f0 <- vBB
+ GET_VREG_DOUBLE f1, a3 # f1 <- vCC
+ mul.d f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a4 # vAA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_div_double: /* 0xae */
+/* File: mips64/op_div_double.S */
+/* File: mips64/fbinopWide.S */
+ /*:
+ * Generic 64-bit floating-point operation.
+ *
+ * For: add-double, sub-double, mul-double, div-double.
+ * form: <op> f0, f0, f1
+ */
+ /* binop vAA, vBB, vCC */
+ srl a4, rINST, 8 # a4 <- AA
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_DOUBLE f0, a2 # f0 <- vBB
+ GET_VREG_DOUBLE f1, a3 # f1 <- vCC
+ div.d f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a4 # vAA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rem_double: /* 0xaf */
+/* File: mips64/op_rem_double.S */
+ /* rem-double vAA, vBB, vCC */
+ .extern fmod
+ lbu a2, 2(rPC) # a2 <- BB
+ lbu a3, 3(rPC) # a3 <- CC
+ GET_VREG_DOUBLE f12, a2 # f12 <- vBB
+ GET_VREG_DOUBLE f13, a3 # f13 <- vCC
+ jal fmod # f0 <- f12 op f13
+ srl a4, rINST, 8 # a4 <- AA
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a4 # vAA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_add_int_2addr: /* 0xb0 */
+/* File: mips64/op_add_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ addu a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sub_int_2addr: /* 0xb1 */
+/* File: mips64/op_sub_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ subu a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_mul_int_2addr: /* 0xb2 */
+/* File: mips64/op_mul_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ mul a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_div_int_2addr: /* 0xb3 */
+/* File: mips64/op_div_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ div a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rem_int_2addr: /* 0xb4 */
+/* File: mips64/op_rem_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ mod a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_and_int_2addr: /* 0xb5 */
+/* File: mips64/op_and_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ and a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_or_int_2addr: /* 0xb6 */
+/* File: mips64/op_or_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ or a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_xor_int_2addr: /* 0xb7 */
+/* File: mips64/op_xor_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ xor a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_shl_int_2addr: /* 0xb8 */
+/* File: mips64/op_shl_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ sll a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_shr_int_2addr: /* 0xb9 */
+/* File: mips64/op_shr_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ sra a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_ushr_int_2addr: /* 0xba */
+/* File: mips64/op_ushr_int_2addr.S */
+/* File: mips64/binop2addr.S */
+ /*
+ * Generic 32-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (INT_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
+ * rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
+ * shl-int/2addr, shr-int/2addr, ushr-int/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a2 # a0 <- vA
+ GET_VREG a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ srl a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_add_long_2addr: /* 0xbb */
+/* File: mips64/op_add_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ daddu a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sub_long_2addr: /* 0xbc */
+/* File: mips64/op_sub_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ dsubu a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_mul_long_2addr: /* 0xbd */
+/* File: mips64/op_mul_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ dmul a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_div_long_2addr: /* 0xbe */
+/* File: mips64/op_div_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ ddiv a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rem_long_2addr: /* 0xbf */
+/* File: mips64/op_rem_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ dmod a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_and_long_2addr: /* 0xc0 */
+/* File: mips64/op_and_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ and a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_or_long_2addr: /* 0xc1 */
+/* File: mips64/op_or_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ or a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_xor_long_2addr: /* 0xc2 */
+/* File: mips64/op_xor_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ xor a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_shl_long_2addr: /* 0xc3 */
+/* File: mips64/op_shl_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ dsll a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_shr_long_2addr: /* 0xc4 */
+/* File: mips64/op_shr_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ dsra a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_ushr_long_2addr: /* 0xc5 */
+/* File: mips64/op_ushr_long_2addr.S */
+/* File: mips64/binopWide2addr.S */
+ /*
+ * Generic 64-bit "/2addr" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be a MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * vB (a1). Useful for integer division and modulus. Note that we
+ * *don't* check for (LONG_MIN / -1) here, because the CPU handles it
+ * correctly.
+ *
+ * For: add-long/2addr, sub-long/2addr, mul-long/2addr, div-long/2addr,
+ * rem-long/2addr, and-long/2addr, or-long/2addr, xor-long/2addr,
+ * shl-long/2addr, shr-long/2addr, ushr-long/2addr
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_WIDE a0, a2 # a0 <- vA
+ GET_VREG_WIDE a1, a3 # a1 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ # optional op
+ dsrl a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_add_float_2addr: /* 0xc6 */
+/* File: mips64/op_add_float_2addr.S */
+/* File: mips64/fbinop2addr.S */
+ /*:
+ * Generic 32-bit "/2addr" floating-point operation.
+ *
+ * For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr.
+ * form: <op> f0, f0, f1
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_FLOAT f0, a2 # f0 <- vA
+ GET_VREG_FLOAT f1, a3 # f1 <- vB
+ add.s f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a2 # vA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sub_float_2addr: /* 0xc7 */
+/* File: mips64/op_sub_float_2addr.S */
+/* File: mips64/fbinop2addr.S */
+ /*:
+ * Generic 32-bit "/2addr" floating-point operation.
+ *
+ * For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr.
+ * form: <op> f0, f0, f1
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_FLOAT f0, a2 # f0 <- vA
+ GET_VREG_FLOAT f1, a3 # f1 <- vB
+ sub.s f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a2 # vA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_mul_float_2addr: /* 0xc8 */
+/* File: mips64/op_mul_float_2addr.S */
+/* File: mips64/fbinop2addr.S */
+ /*:
+ * Generic 32-bit "/2addr" floating-point operation.
+ *
+ * For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr.
+ * form: <op> f0, f0, f1
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_FLOAT f0, a2 # f0 <- vA
+ GET_VREG_FLOAT f1, a3 # f1 <- vB
+ mul.s f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a2 # vA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_div_float_2addr: /* 0xc9 */
+/* File: mips64/op_div_float_2addr.S */
+/* File: mips64/fbinop2addr.S */
+ /*:
+ * Generic 32-bit "/2addr" floating-point operation.
+ *
+ * For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr.
+ * form: <op> f0, f0, f1
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_FLOAT f0, a2 # f0 <- vA
+ GET_VREG_FLOAT f1, a3 # f1 <- vB
+ div.s f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a2 # vA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rem_float_2addr: /* 0xca */
+/* File: mips64/op_rem_float_2addr.S */
+ /* rem-float/2addr vA, vB */
+ .extern fmodf
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_FLOAT f12, a2 # f12 <- vA
+ GET_VREG_FLOAT f13, a3 # f13 <- vB
+ jal fmodf # f0 <- f12 op f13
+ ext a2, rINST, 8, 4 # a2 <- A
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_FLOAT f0, a2 # vA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_add_double_2addr: /* 0xcb */
+/* File: mips64/op_add_double_2addr.S */
+/* File: mips64/fbinopWide2addr.S */
+ /*:
+ * Generic 64-bit "/2addr" floating-point operation.
+ *
+ * For: add-double/2addr, sub-double/2addr, mul-double/2addr, div-double/2addr.
+ * form: <op> f0, f0, f1
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_DOUBLE f0, a2 # f0 <- vA
+ GET_VREG_DOUBLE f1, a3 # f1 <- vB
+ add.d f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a2 # vA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_sub_double_2addr: /* 0xcc */
+/* File: mips64/op_sub_double_2addr.S */
+/* File: mips64/fbinopWide2addr.S */
+ /*:
+ * Generic 64-bit "/2addr" floating-point operation.
+ *
+ * For: add-double/2addr, sub-double/2addr, mul-double/2addr, div-double/2addr.
+ * form: <op> f0, f0, f1
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_DOUBLE f0, a2 # f0 <- vA
+ GET_VREG_DOUBLE f1, a3 # f1 <- vB
+ sub.d f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a2 # vA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_mul_double_2addr: /* 0xcd */
+/* File: mips64/op_mul_double_2addr.S */
+/* File: mips64/fbinopWide2addr.S */
+ /*:
+ * Generic 64-bit "/2addr" floating-point operation.
+ *
+ * For: add-double/2addr, sub-double/2addr, mul-double/2addr, div-double/2addr.
+ * form: <op> f0, f0, f1
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_DOUBLE f0, a2 # f0 <- vA
+ GET_VREG_DOUBLE f1, a3 # f1 <- vB
+ mul.d f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a2 # vA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_div_double_2addr: /* 0xce */
+/* File: mips64/op_div_double_2addr.S */
+/* File: mips64/fbinopWide2addr.S */
+ /*:
+ * Generic 64-bit "/2addr" floating-point operation.
+ *
+ * For: add-double/2addr, sub-double/2addr, mul-double/2addr, div-double/2addr.
+ * form: <op> f0, f0, f1
+ */
+ /* binop/2addr vA, vB */
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_DOUBLE f0, a2 # f0 <- vA
+ GET_VREG_DOUBLE f1, a3 # f1 <- vB
+ div.d f0, f0, f1 # f0 <- f0 op f1
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a2 # vA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rem_double_2addr: /* 0xcf */
+/* File: mips64/op_rem_double_2addr.S */
+ /* rem-double/2addr vA, vB */
+ .extern fmod
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG_DOUBLE f12, a2 # f12 <- vA
+ GET_VREG_DOUBLE f13, a3 # f13 <- vB
+ jal fmod # f0 <- f12 op f13
+ ext a2, rINST, 8, 4 # a2 <- A
+ FETCH_ADVANCE_INST 1 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_DOUBLE f0, a2 # vA <- f0
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_add_int_lit16: /* 0xd0 */
+/* File: mips64/op_add_int_lit16.S */
+/* File: mips64/binopLit16.S */
+ /*
+ * Generic 32-bit "lit16" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CCCC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
+ * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
+ */
+ /* binop/lit16 vA, vB, #+CCCC */
+ lh a1, 2(rPC) # a1 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ addu a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rsub_int: /* 0xd1 */
+/* File: mips64/op_rsub_int.S */
+/* File: mips64/binopLit16.S */
+ /*
+ * Generic 32-bit "lit16" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CCCC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
+ * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
+ */
+ /* binop/lit16 vA, vB, #+CCCC */
+ lh a1, 2(rPC) # a1 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ subu a0, a1, a0 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_mul_int_lit16: /* 0xd2 */
+/* File: mips64/op_mul_int_lit16.S */
+/* File: mips64/binopLit16.S */
+ /*
+ * Generic 32-bit "lit16" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CCCC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
+ * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
+ */
+ /* binop/lit16 vA, vB, #+CCCC */
+ lh a1, 2(rPC) # a1 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ mul a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_div_int_lit16: /* 0xd3 */
+/* File: mips64/op_div_int_lit16.S */
+/* File: mips64/binopLit16.S */
+ /*
+ * Generic 32-bit "lit16" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CCCC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
+ * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
+ */
+ /* binop/lit16 vA, vB, #+CCCC */
+ lh a1, 2(rPC) # a1 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ div a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rem_int_lit16: /* 0xd4 */
+/* File: mips64/op_rem_int_lit16.S */
+/* File: mips64/binopLit16.S */
+ /*
+ * Generic 32-bit "lit16" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CCCC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
+ * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
+ */
+ /* binop/lit16 vA, vB, #+CCCC */
+ lh a1, 2(rPC) # a1 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ mod a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_and_int_lit16: /* 0xd5 */
+/* File: mips64/op_and_int_lit16.S */
+/* File: mips64/binopLit16.S */
+ /*
+ * Generic 32-bit "lit16" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CCCC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
+ * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
+ */
+ /* binop/lit16 vA, vB, #+CCCC */
+ lh a1, 2(rPC) # a1 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ and a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_or_int_lit16: /* 0xd6 */
+/* File: mips64/op_or_int_lit16.S */
+/* File: mips64/binopLit16.S */
+ /*
+ * Generic 32-bit "lit16" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CCCC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
+ * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
+ */
+ /* binop/lit16 vA, vB, #+CCCC */
+ lh a1, 2(rPC) # a1 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ or a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_xor_int_lit16: /* 0xd7 */
+/* File: mips64/op_xor_int_lit16.S */
+/* File: mips64/binopLit16.S */
+ /*
+ * Generic 32-bit "lit16" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CCCC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
+ * rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
+ */
+ /* binop/lit16 vA, vB, #+CCCC */
+ lh a1, 2(rPC) # a1 <- sign-extended CCCC
+ ext a2, rINST, 8, 4 # a2 <- A
+ ext a3, rINST, 12, 4 # a3 <- B
+ GET_VREG a0, a3 # a0 <- vB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ xor a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_add_int_lit8: /* 0xd8 */
+/* File: mips64/op_add_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ addu a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rsub_int_lit8: /* 0xd9 */
+/* File: mips64/op_rsub_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ subu a0, a1, a0 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_mul_int_lit8: /* 0xda */
+/* File: mips64/op_mul_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ mul a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_div_int_lit8: /* 0xdb */
+/* File: mips64/op_div_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ div a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_rem_int_lit8: /* 0xdc */
+/* File: mips64/op_rem_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 1
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ mod a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_and_int_lit8: /* 0xdd */
+/* File: mips64/op_and_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ and a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_or_int_lit8: /* 0xde */
+/* File: mips64/op_or_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ or a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_xor_int_lit8: /* 0xdf */
+/* File: mips64/op_xor_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ xor a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_shl_int_lit8: /* 0xe0 */
+/* File: mips64/op_shl_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ sll a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_shr_int_lit8: /* 0xe1 */
+/* File: mips64/op_shr_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ sra a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_ushr_int_lit8: /* 0xe2 */
+/* File: mips64/op_ushr_int_lit8.S */
+/* File: mips64/binopLit8.S */
+ /*
+ * Generic 32-bit "lit8" binary operation. Provide an "instr" line
+ * that specifies an instruction that performs "result = a0 op a1".
+ * This could be an MIPS instruction or a function call. (If the result
+ * comes back in a register other than a0, you can override "result".)
+ *
+ * If "chkzero" is set to 1, we perform a divide-by-zero check on
+ * CC (a1). Useful for integer division and modulus.
+ *
+ * For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
+ * rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
+ * shl-int/lit8, shr-int/lit8, ushr-int/lit8
+ */
+ /* binop/lit8 vAA, vBB, #+CC */
+ lbu a3, 2(rPC) # a3 <- BB
+ lb a1, 3(rPC) # a1 <- sign-extended CC
+ srl a2, rINST, 8 # a2 <- AA
+ GET_VREG a0, a3 # a0 <- vBB
+ .if 0
+ beqz a1, common_errDivideByZero # is second operand zero?
+ .endif
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ # optional op
+ srl a0, a0, a1 # a0 <- op, a0-a3 changed
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG a0, a2 # vAA <- a0
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_quick: /* 0xe3 */
+/* File: mips64/op_iget_quick.S */
+ /* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
+ /* op vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- object we're operating on
+ ext a4, rINST, 8, 4 # a4 <- A
+ daddu a1, a1, a3
+ beqz a3, common_errNullObject # object was null
+ lw a0, 0(a1) # a0 <- obj.field
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ SET_VREG a0, a4 # fp[A] <- a0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_wide_quick: /* 0xe4 */
+/* File: mips64/op_iget_wide_quick.S */
+ /* iget-wide-quick vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a4, 2(rPC) # a4 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- object we're operating on
+ ext a2, rINST, 8, 4 # a2 <- A
+ beqz a3, common_errNullObject # object was null
+ daddu a4, a3, a4 # create direct pointer
+ lw a0, 0(a4)
+ lw a1, 4(a4)
+ dinsu a0, a1, 32, 32
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ SET_VREG_WIDE a0, a2
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_object_quick: /* 0xe5 */
+/* File: mips64/op_iget_object_quick.S */
+ /* For: iget-object-quick */
+ /* op vA, vB, offset//CCCC */
+ .extern artIGetObjectFromMterp
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ EXPORT_PC
+ GET_VREG_U a0, a2 # a0 <- object we're operating on
+ jal artIGetObjectFromMterp # (obj, offset)
+ ld a3, THREAD_EXCEPTION_OFFSET(rSELF)
+ ext a2, rINST, 8, 4 # a2 <- A
+ PREFETCH_INST 2
+ bnez a3, MterpPossibleException # bail out
+ SET_VREG_OBJECT v0, a2 # fp[A] <- v0
+ ADVANCE 2 # advance rPC
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_quick: /* 0xe6 */
+/* File: mips64/op_iput_quick.S */
+ /* For: iput-quick, iput-boolean-quick, iput-byte-quick, iput-char-quick, iput-short-quick */
+ /* op vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ beqz a3, common_errNullObject # object was null
+ GET_VREG a0, a2 # a0 <- fp[A]
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ daddu a1, a1, a3
+ sw a0, 0(a1) # obj.field <- a0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_wide_quick: /* 0xe7 */
+/* File: mips64/op_iput_wide_quick.S */
+ /* iput-wide-quick vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a3, 2(rPC) # a3 <- field byte offset
+ GET_VREG_U a2, a2 # a2 <- fp[B], the object pointer
+ ext a0, rINST, 8, 4 # a0 <- A
+ beqz a2, common_errNullObject # object was null
+ GET_VREG_WIDE a0, a0 # a0 <- fp[A]
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ daddu a1, a2, a3 # create a direct pointer
+ sw a0, 0(a1)
+ dsrl32 a0, a0, 0
+ sw a0, 4(a1)
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_object_quick: /* 0xe8 */
+/* File: mips64/op_iput_object_quick.S */
+ .extern MterpIputObjectQuick
+ EXPORT_PC
+ daddu a0, rFP, OFF_FP_SHADOWFRAME
+ move a1, rPC
+ move a2, rINST
+ jal MterpIputObjectQuick
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_virtual_quick: /* 0xe9 */
+/* File: mips64/op_invoke_virtual_quick.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeVirtualQuick
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeVirtualQuick
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_virtual_range_quick: /* 0xea */
+/* File: mips64/op_invoke_virtual_range_quick.S */
+/* File: mips64/invoke.S */
+ /*
+ * Generic invoke handler wrapper.
+ */
+ /* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
+ /* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
+ .extern MterpInvokeVirtualQuickRange
+ EXPORT_PC
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ move a2, rPC
+ move a3, rINST
+ jal MterpInvokeVirtualQuickRange
+ beqzc v0, MterpException
+ FETCH_ADVANCE_INST 3
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_boolean_quick: /* 0xeb */
+/* File: mips64/op_iput_boolean_quick.S */
+/* File: mips64/op_iput_quick.S */
+ /* For: iput-quick, iput-boolean-quick, iput-byte-quick, iput-char-quick, iput-short-quick */
+ /* op vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ beqz a3, common_errNullObject # object was null
+ GET_VREG a0, a2 # a0 <- fp[A]
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ daddu a1, a1, a3
+ sb a0, 0(a1) # obj.field <- a0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_byte_quick: /* 0xec */
+/* File: mips64/op_iput_byte_quick.S */
+/* File: mips64/op_iput_quick.S */
+ /* For: iput-quick, iput-boolean-quick, iput-byte-quick, iput-char-quick, iput-short-quick */
+ /* op vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ beqz a3, common_errNullObject # object was null
+ GET_VREG a0, a2 # a0 <- fp[A]
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ daddu a1, a1, a3
+ sb a0, 0(a1) # obj.field <- a0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_char_quick: /* 0xed */
+/* File: mips64/op_iput_char_quick.S */
+/* File: mips64/op_iput_quick.S */
+ /* For: iput-quick, iput-boolean-quick, iput-byte-quick, iput-char-quick, iput-short-quick */
+ /* op vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ beqz a3, common_errNullObject # object was null
+ GET_VREG a0, a2 # a0 <- fp[A]
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ daddu a1, a1, a3
+ sh a0, 0(a1) # obj.field <- a0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iput_short_quick: /* 0xee */
+/* File: mips64/op_iput_short_quick.S */
+/* File: mips64/op_iput_quick.S */
+ /* For: iput-quick, iput-boolean-quick, iput-byte-quick, iput-char-quick, iput-short-quick */
+ /* op vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- fp[B], the object pointer
+ ext a2, rINST, 8, 4 # a2 <- A
+ beqz a3, common_errNullObject # object was null
+ GET_VREG a0, a2 # a0 <- fp[A]
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ daddu a1, a1, a3
+ sh a0, 0(a1) # obj.field <- a0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_boolean_quick: /* 0xef */
+/* File: mips64/op_iget_boolean_quick.S */
+/* File: mips64/op_iget_quick.S */
+ /* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
+ /* op vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- object we're operating on
+ ext a4, rINST, 8, 4 # a4 <- A
+ daddu a1, a1, a3
+ beqz a3, common_errNullObject # object was null
+ lbu a0, 0(a1) # a0 <- obj.field
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ SET_VREG a0, a4 # fp[A] <- a0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_byte_quick: /* 0xf0 */
+/* File: mips64/op_iget_byte_quick.S */
+/* File: mips64/op_iget_quick.S */
+ /* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
+ /* op vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- object we're operating on
+ ext a4, rINST, 8, 4 # a4 <- A
+ daddu a1, a1, a3
+ beqz a3, common_errNullObject # object was null
+ lb a0, 0(a1) # a0 <- obj.field
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ SET_VREG a0, a4 # fp[A] <- a0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_char_quick: /* 0xf1 */
+/* File: mips64/op_iget_char_quick.S */
+/* File: mips64/op_iget_quick.S */
+ /* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
+ /* op vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- object we're operating on
+ ext a4, rINST, 8, 4 # a4 <- A
+ daddu a1, a1, a3
+ beqz a3, common_errNullObject # object was null
+ lhu a0, 0(a1) # a0 <- obj.field
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ SET_VREG a0, a4 # fp[A] <- a0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_iget_short_quick: /* 0xf2 */
+/* File: mips64/op_iget_short_quick.S */
+/* File: mips64/op_iget_quick.S */
+ /* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
+ /* op vA, vB, offset//CCCC */
+ srl a2, rINST, 12 # a2 <- B
+ lhu a1, 2(rPC) # a1 <- field byte offset
+ GET_VREG_U a3, a2 # a3 <- object we're operating on
+ ext a4, rINST, 8, 4 # a4 <- A
+ daddu a1, a1, a3
+ beqz a3, common_errNullObject # object was null
+ lh a0, 0(a1) # a0 <- obj.field
+ FETCH_ADVANCE_INST 2 # advance rPC, load rINST
+ SET_VREG a0, a4 # fp[A] <- a0
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_invoke_lambda: /* 0xf3 */
+/* Transfer stub to alternate interpreter */
+ b MterpFallback
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_f4: /* 0xf4 */
+/* File: mips64/op_unused_f4.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_capture_variable: /* 0xf5 */
+/* Transfer stub to alternate interpreter */
+ b MterpFallback
+
+/* ------------------------------ */
+ .balign 128
+.L_op_create_lambda: /* 0xf6 */
+/* Transfer stub to alternate interpreter */
+ b MterpFallback
+
+/* ------------------------------ */
+ .balign 128
+.L_op_liberate_variable: /* 0xf7 */
+/* Transfer stub to alternate interpreter */
+ b MterpFallback
+
+/* ------------------------------ */
+ .balign 128
+.L_op_box_lambda: /* 0xf8 */
+/* Transfer stub to alternate interpreter */
+ b MterpFallback
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unbox_lambda: /* 0xf9 */
+/* Transfer stub to alternate interpreter */
+ b MterpFallback
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_fa: /* 0xfa */
+/* File: mips64/op_unused_fa.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_fb: /* 0xfb */
+/* File: mips64/op_unused_fb.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_fc: /* 0xfc */
+/* File: mips64/op_unused_fc.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_fd: /* 0xfd */
+/* File: mips64/op_unused_fd.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_fe: /* 0xfe */
+/* File: mips64/op_unused_fe.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+/* ------------------------------ */
+ .balign 128
+.L_op_unused_ff: /* 0xff */
+/* File: mips64/op_unused_ff.S */
+/* File: mips64/unused.S */
+/*
+ * Bail to reference interpreter to throw.
+ */
+ b MterpFallback
+
+
+ .balign 128
+ .size artMterpAsmInstructionStart, .-artMterpAsmInstructionStart
+ .global artMterpAsmInstructionEnd
+artMterpAsmInstructionEnd:
+
+/*
+ * ===========================================================================
+ * Sister implementations
+ * ===========================================================================
+ */
+ .global artMterpAsmSisterStart
+ .type artMterpAsmSisterStart, %function
+ .text
+ .balign 4
+artMterpAsmSisterStart:
+
+/* continuation for op_float_to_int */
+.Lop_float_to_int_trunc:
+ trunc.w.s f0, f0
+ mfc1 t0, f0
+.Lop_float_to_int_done:
+ /* Can't include fcvtFooter.S after break */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG t0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* continuation for op_float_to_long */
+.Lop_float_to_long_trunc:
+ trunc.l.s f0, f0
+ dmfc1 t0, f0
+.Lop_float_to_long_done:
+ /* Can't include fcvtFooter.S after break */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE t0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* continuation for op_double_to_int */
+.Lop_double_to_int_trunc:
+ trunc.w.d f0, f0
+ mfc1 t0, f0
+.Lop_double_to_int_done:
+ /* Can't include fcvtFooter.S after break */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG t0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+/* continuation for op_double_to_long */
+.Lop_double_to_long_trunc:
+ trunc.l.d f0, f0
+ dmfc1 t0, f0
+.Lop_double_to_long_done:
+ /* Can't include fcvtFooter.S after break */
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ SET_VREG_WIDE t0, a1
+ GOTO_OPCODE v0 # jump to next instruction
+
+ .size artMterpAsmSisterStart, .-artMterpAsmSisterStart
+ .global artMterpAsmSisterEnd
+artMterpAsmSisterEnd:
+
+
+ .global artMterpAsmAltInstructionStart
+ .type artMterpAsmAltInstructionStart, %function
+ .text
+
+artMterpAsmAltInstructionStart = .L_ALT_op_nop
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_nop: /* 0x00 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (0 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move: /* 0x01 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (1 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_from16: /* 0x02 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (2 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_16: /* 0x03 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (3 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_wide: /* 0x04 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (4 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_wide_from16: /* 0x05 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (5 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_wide_16: /* 0x06 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (6 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_object: /* 0x07 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (7 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_object_from16: /* 0x08 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (8 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_object_16: /* 0x09 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (9 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_result: /* 0x0a */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (10 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_result_wide: /* 0x0b */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (11 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_result_object: /* 0x0c */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (12 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_move_exception: /* 0x0d */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (13 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_return_void: /* 0x0e */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (14 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_return: /* 0x0f */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (15 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_return_wide: /* 0x10 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (16 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_return_object: /* 0x11 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (17 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const_4: /* 0x12 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (18 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const_16: /* 0x13 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (19 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const: /* 0x14 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (20 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const_high16: /* 0x15 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (21 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const_wide_16: /* 0x16 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (22 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const_wide_32: /* 0x17 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (23 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const_wide: /* 0x18 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (24 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const_wide_high16: /* 0x19 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (25 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const_string: /* 0x1a */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (26 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const_string_jumbo: /* 0x1b */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (27 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_const_class: /* 0x1c */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (28 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_monitor_enter: /* 0x1d */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (29 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_monitor_exit: /* 0x1e */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (30 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_check_cast: /* 0x1f */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (31 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_instance_of: /* 0x20 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (32 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_array_length: /* 0x21 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (33 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_new_instance: /* 0x22 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (34 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_new_array: /* 0x23 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (35 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_filled_new_array: /* 0x24 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (36 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_filled_new_array_range: /* 0x25 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (37 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_fill_array_data: /* 0x26 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (38 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_throw: /* 0x27 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (39 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_goto: /* 0x28 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (40 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_goto_16: /* 0x29 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (41 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_goto_32: /* 0x2a */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (42 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_packed_switch: /* 0x2b */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (43 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sparse_switch: /* 0x2c */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (44 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_cmpl_float: /* 0x2d */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (45 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_cmpg_float: /* 0x2e */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (46 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_cmpl_double: /* 0x2f */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (47 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_cmpg_double: /* 0x30 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (48 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_cmp_long: /* 0x31 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (49 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_eq: /* 0x32 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (50 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_ne: /* 0x33 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (51 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_lt: /* 0x34 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (52 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_ge: /* 0x35 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (53 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_gt: /* 0x36 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (54 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_le: /* 0x37 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (55 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_eqz: /* 0x38 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (56 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_nez: /* 0x39 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (57 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_ltz: /* 0x3a */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (58 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_gez: /* 0x3b */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (59 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_gtz: /* 0x3c */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (60 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_if_lez: /* 0x3d */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (61 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_3e: /* 0x3e */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (62 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_3f: /* 0x3f */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (63 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_40: /* 0x40 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (64 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_41: /* 0x41 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (65 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_42: /* 0x42 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (66 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_43: /* 0x43 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (67 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aget: /* 0x44 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (68 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aget_wide: /* 0x45 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (69 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aget_object: /* 0x46 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (70 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aget_boolean: /* 0x47 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (71 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aget_byte: /* 0x48 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (72 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aget_char: /* 0x49 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (73 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aget_short: /* 0x4a */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (74 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aput: /* 0x4b */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (75 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aput_wide: /* 0x4c */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (76 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aput_object: /* 0x4d */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (77 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aput_boolean: /* 0x4e */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (78 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aput_byte: /* 0x4f */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (79 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aput_char: /* 0x50 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (80 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_aput_short: /* 0x51 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (81 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget: /* 0x52 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (82 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_wide: /* 0x53 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (83 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_object: /* 0x54 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (84 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_boolean: /* 0x55 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (85 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_byte: /* 0x56 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (86 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_char: /* 0x57 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (87 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_short: /* 0x58 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (88 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput: /* 0x59 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (89 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_wide: /* 0x5a */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (90 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_object: /* 0x5b */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (91 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_boolean: /* 0x5c */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (92 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_byte: /* 0x5d */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (93 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_char: /* 0x5e */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (94 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_short: /* 0x5f */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (95 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sget: /* 0x60 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (96 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sget_wide: /* 0x61 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (97 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sget_object: /* 0x62 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (98 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sget_boolean: /* 0x63 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (99 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sget_byte: /* 0x64 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (100 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sget_char: /* 0x65 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (101 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sget_short: /* 0x66 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (102 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sput: /* 0x67 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (103 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sput_wide: /* 0x68 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (104 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sput_object: /* 0x69 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (105 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sput_boolean: /* 0x6a */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (106 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sput_byte: /* 0x6b */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (107 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sput_char: /* 0x6c */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (108 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sput_short: /* 0x6d */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (109 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_virtual: /* 0x6e */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (110 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_super: /* 0x6f */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (111 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_direct: /* 0x70 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (112 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_static: /* 0x71 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (113 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_interface: /* 0x72 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (114 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_return_void_no_barrier: /* 0x73 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (115 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_virtual_range: /* 0x74 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (116 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_super_range: /* 0x75 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (117 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_direct_range: /* 0x76 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (118 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_static_range: /* 0x77 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (119 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_interface_range: /* 0x78 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (120 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_79: /* 0x79 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (121 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_7a: /* 0x7a */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (122 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_neg_int: /* 0x7b */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (123 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_not_int: /* 0x7c */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (124 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_neg_long: /* 0x7d */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (125 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_not_long: /* 0x7e */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (126 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_neg_float: /* 0x7f */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (127 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_neg_double: /* 0x80 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (128 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_int_to_long: /* 0x81 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (129 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_int_to_float: /* 0x82 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (130 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_int_to_double: /* 0x83 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (131 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_long_to_int: /* 0x84 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (132 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_long_to_float: /* 0x85 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (133 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_long_to_double: /* 0x86 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (134 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_float_to_int: /* 0x87 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (135 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_float_to_long: /* 0x88 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (136 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_float_to_double: /* 0x89 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (137 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_double_to_int: /* 0x8a */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (138 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_double_to_long: /* 0x8b */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (139 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_double_to_float: /* 0x8c */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (140 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_int_to_byte: /* 0x8d */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (141 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_int_to_char: /* 0x8e */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (142 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_int_to_short: /* 0x8f */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (143 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_add_int: /* 0x90 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (144 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sub_int: /* 0x91 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (145 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_mul_int: /* 0x92 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (146 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_div_int: /* 0x93 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (147 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rem_int: /* 0x94 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (148 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_and_int: /* 0x95 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (149 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_or_int: /* 0x96 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (150 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_xor_int: /* 0x97 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (151 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_shl_int: /* 0x98 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (152 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_shr_int: /* 0x99 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (153 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_ushr_int: /* 0x9a */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (154 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_add_long: /* 0x9b */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (155 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sub_long: /* 0x9c */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (156 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_mul_long: /* 0x9d */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (157 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_div_long: /* 0x9e */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (158 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rem_long: /* 0x9f */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (159 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_and_long: /* 0xa0 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (160 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_or_long: /* 0xa1 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (161 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_xor_long: /* 0xa2 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (162 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_shl_long: /* 0xa3 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (163 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_shr_long: /* 0xa4 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (164 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_ushr_long: /* 0xa5 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (165 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_add_float: /* 0xa6 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (166 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sub_float: /* 0xa7 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (167 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_mul_float: /* 0xa8 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (168 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_div_float: /* 0xa9 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (169 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rem_float: /* 0xaa */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (170 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_add_double: /* 0xab */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (171 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sub_double: /* 0xac */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (172 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_mul_double: /* 0xad */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (173 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_div_double: /* 0xae */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (174 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rem_double: /* 0xaf */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (175 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_add_int_2addr: /* 0xb0 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (176 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sub_int_2addr: /* 0xb1 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (177 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_mul_int_2addr: /* 0xb2 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (178 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_div_int_2addr: /* 0xb3 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (179 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rem_int_2addr: /* 0xb4 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (180 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_and_int_2addr: /* 0xb5 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (181 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_or_int_2addr: /* 0xb6 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (182 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_xor_int_2addr: /* 0xb7 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (183 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_shl_int_2addr: /* 0xb8 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (184 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_shr_int_2addr: /* 0xb9 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (185 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_ushr_int_2addr: /* 0xba */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (186 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_add_long_2addr: /* 0xbb */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (187 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sub_long_2addr: /* 0xbc */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (188 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_mul_long_2addr: /* 0xbd */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (189 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_div_long_2addr: /* 0xbe */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (190 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rem_long_2addr: /* 0xbf */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (191 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_and_long_2addr: /* 0xc0 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (192 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_or_long_2addr: /* 0xc1 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (193 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_xor_long_2addr: /* 0xc2 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (194 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_shl_long_2addr: /* 0xc3 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (195 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_shr_long_2addr: /* 0xc4 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (196 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_ushr_long_2addr: /* 0xc5 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (197 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_add_float_2addr: /* 0xc6 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (198 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sub_float_2addr: /* 0xc7 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (199 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_mul_float_2addr: /* 0xc8 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (200 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_div_float_2addr: /* 0xc9 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (201 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rem_float_2addr: /* 0xca */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (202 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_add_double_2addr: /* 0xcb */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (203 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_sub_double_2addr: /* 0xcc */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (204 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_mul_double_2addr: /* 0xcd */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (205 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_div_double_2addr: /* 0xce */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (206 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rem_double_2addr: /* 0xcf */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (207 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_add_int_lit16: /* 0xd0 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (208 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rsub_int: /* 0xd1 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (209 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_mul_int_lit16: /* 0xd2 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (210 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_div_int_lit16: /* 0xd3 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (211 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rem_int_lit16: /* 0xd4 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (212 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_and_int_lit16: /* 0xd5 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (213 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_or_int_lit16: /* 0xd6 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (214 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_xor_int_lit16: /* 0xd7 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (215 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_add_int_lit8: /* 0xd8 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (216 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rsub_int_lit8: /* 0xd9 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (217 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_mul_int_lit8: /* 0xda */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (218 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_div_int_lit8: /* 0xdb */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (219 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_rem_int_lit8: /* 0xdc */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (220 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_and_int_lit8: /* 0xdd */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (221 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_or_int_lit8: /* 0xde */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (222 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_xor_int_lit8: /* 0xdf */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (223 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_shl_int_lit8: /* 0xe0 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (224 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_shr_int_lit8: /* 0xe1 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (225 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_ushr_int_lit8: /* 0xe2 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (226 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_quick: /* 0xe3 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (227 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_wide_quick: /* 0xe4 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (228 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_object_quick: /* 0xe5 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (229 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_quick: /* 0xe6 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (230 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_wide_quick: /* 0xe7 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (231 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_object_quick: /* 0xe8 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (232 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_virtual_quick: /* 0xe9 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (233 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_virtual_range_quick: /* 0xea */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (234 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_boolean_quick: /* 0xeb */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (235 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_byte_quick: /* 0xec */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (236 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_char_quick: /* 0xed */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (237 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iput_short_quick: /* 0xee */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (238 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_boolean_quick: /* 0xef */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (239 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_byte_quick: /* 0xf0 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (240 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_char_quick: /* 0xf1 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (241 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_iget_short_quick: /* 0xf2 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (242 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_invoke_lambda: /* 0xf3 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (243 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_f4: /* 0xf4 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (244 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_capture_variable: /* 0xf5 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (245 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_create_lambda: /* 0xf6 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (246 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_liberate_variable: /* 0xf7 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (247 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_box_lambda: /* 0xf8 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (248 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unbox_lambda: /* 0xf9 */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (249 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_fa: /* 0xfa */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (250 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_fb: /* 0xfb */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (251 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_fc: /* 0xfc */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (252 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_fd: /* 0xfd */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (253 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_fe: /* 0xfe */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (254 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+/* ------------------------------ */
+ .balign 128
+.L_ALT_op_unused_ff: /* 0xff */
+/* File: mips64/alt_stub.S */
+/*
+ * Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
+ * any interesting requests and then jump to the real instruction
+ * handler. Note that the call to MterpCheckBefore is done as a tail call.
+ */
+ .extern MterpCheckBefore
+ EXPORT_PC
+ REFRESH_IBASE
+ dla ra, artMterpAsmInstructionStart
+ dla t9, MterpCheckBefore
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ daddu ra, ra, (255 * 128) # Addr of primary handler.
+ jalr zero, t9 # (self, shadow_frame) Note: tail call.
+
+ .balign 128
+ .size artMterpAsmAltInstructionStart, .-artMterpAsmAltInstructionStart
+ .global artMterpAsmAltInstructionEnd
+artMterpAsmAltInstructionEnd:
+/* File: mips64/footer.S */
+/*
+ * We've detected a condition that will result in an exception, but the exception
+ * has not yet been thrown. Just bail out to the reference interpreter to deal with it.
+ * TUNING: for consistency, we may want to just go ahead and handle these here.
+ */
+
+ .extern MterpLogDivideByZeroException
+common_errDivideByZero:
+ EXPORT_PC
+#if MTERP_LOGGING
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ jal MterpLogDivideByZeroException
+#endif
+ b MterpCommonFallback
+
+ .extern MterpLogArrayIndexException
+common_errArrayIndex:
+ EXPORT_PC
+#if MTERP_LOGGING
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ jal MterpLogArrayIndexException
+#endif
+ b MterpCommonFallback
+
+ .extern MterpLogNullObjectException
+common_errNullObject:
+ EXPORT_PC
+#if MTERP_LOGGING
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ jal MterpLogNullObjectException
+#endif
+ b MterpCommonFallback
+
+/*
+ * If we're here, something is out of the ordinary. If there is a pending
+ * exception, handle it. Otherwise, roll back and retry with the reference
+ * interpreter.
+ */
+MterpPossibleException:
+ ld a0, THREAD_EXCEPTION_OFFSET(rSELF)
+ beqzc a0, MterpFallback # If not, fall back to reference interpreter.
+ /* intentional fallthrough - handle pending exception. */
+/*
+ * On return from a runtime helper routine, we've found a pending exception.
+ * Can we handle it here - or need to bail out to caller?
+ *
+ */
+ .extern MterpHandleException
+MterpException:
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ jal MterpHandleException # (self, shadow_frame)
+ beqzc v0, MterpExceptionReturn # no local catch, back to caller.
+ ld a0, OFF_FP_CODE_ITEM(rFP)
+ lwu a1, OFF_FP_DEX_PC(rFP)
+ REFRESH_IBASE
+ daddu rPC, a0, CODEITEM_INSNS_OFFSET
+ dlsa rPC, a1, rPC, 1 # generate new dex_pc_ptr
+ sd rPC, OFF_FP_DEX_PC_PTR(rFP)
+ /* resume execution at catch block */
+ FETCH_INST
+ GET_INST_OPCODE v0
+ GOTO_OPCODE v0
+ /* NOTE: no fallthrough */
+
+/*
+ * Check for suspend check request. Assumes rINST already loaded, rPC advanced and
+ * still needs to get the opcode and branch to it, and flags are in ra.
+ */
+ .extern MterpSuspendCheck
+MterpCheckSuspendAndContinue:
+ REFRESH_IBASE
+ and ra, ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
+ bnez ra, check1
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+check1:
+ EXPORT_PC
+ move a0, rSELF
+ jal MterpSuspendCheck # (self)
+ GET_INST_OPCODE v0 # extract opcode from rINST
+ GOTO_OPCODE v0 # jump to next instruction
+
+/*
+ * Bail out to reference interpreter.
+ */
+ .extern MterpLogFallback
+MterpFallback:
+ EXPORT_PC
+#if MTERP_LOGGING
+ move a0, rSELF
+ daddu a1, rFP, OFF_FP_SHADOWFRAME
+ jal MterpLogFallback
+#endif
+MterpCommonFallback:
+ li v0, 0 # signal retry with reference interpreter.
+ b MterpDone
+
+/*
+ * We pushed some registers on the stack in ExecuteMterpImpl, then saved
+ * SP and RA. Here we restore SP, restore the registers, and then restore
+ * RA to PC.
+ *
+ * On entry:
+ * uint32_t* rFP (should still be live, pointer to base of vregs)
+ */
+MterpExceptionReturn:
+ li v0, 1 # signal return to caller.
+ b MterpDone
+/*
+ * Returned value is expected in a0 and if it's not 64-bit, the 32 most
+ * significant bits of a0 must be 0.
+ */
+MterpReturn:
+ ld a2, OFF_FP_RESULT_REGISTER(rFP)
+ lw ra, THREAD_FLAGS_OFFSET(rSELF)
+ sd a0, 0(a2)
+ move a0, rSELF
+ and ra, ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
+ beqzc ra, check2
+ jal MterpSuspendCheck # (self)
+check2:
+ li v0, 1 # signal return to caller.
+MterpDone:
+ ld s5, STACK_OFFSET_S5(sp)
+ .cfi_restore 21
+ ld s4, STACK_OFFSET_S4(sp)
+ .cfi_restore 20
+ ld s3, STACK_OFFSET_S3(sp)
+ .cfi_restore 19
+ ld s2, STACK_OFFSET_S2(sp)
+ .cfi_restore 18
+ ld s1, STACK_OFFSET_S1(sp)
+ .cfi_restore 17
+ ld s0, STACK_OFFSET_S0(sp)
+ .cfi_restore 16
+
+ ld ra, STACK_OFFSET_RA(sp)
+ .cfi_restore 31
+
+ ld t8, STACK_OFFSET_GP(sp)
+ .cpreturn
+ .cfi_restore 28
+
+ .set noreorder
+ jr ra
+ daddu sp, sp, STACK_SIZE
+ .cfi_adjust_cfa_offset -STACK_SIZE
+
+ .cfi_endproc
+ .size ExecuteMterpImpl, .-ExecuteMterpImpl
+